gcc-11 points out a mismatch between the declaration and the definition
of poly1305_core_setkey():
lib/crypto/poly1305-donna32.c:13:67: error: argument 2 of type ‘const u8[16]’ {aka ‘const unsigned char[16]’} with mismatched bound [-Werror=array-parameter=]
13 | void poly1305_core_setkey(struct poly1305_core_key *key, const u8 raw_key[16])
| ~~~~~~~~~^~~~~~~~~~~
In file included from lib/crypto/poly1305-donna32.c:11:
include/crypto/internal/poly1305.h:21:68: note: previously declared as ‘const u8 *’ {aka ‘const unsigned char *’}
21 | void poly1305_core_setkey(struct poly1305_core_key *key, const u8 *raw_key);
This is harmless in principle, as the calling conventions are the same,
but the more specific prototype allows better type checking in the
caller.
Change the declaration to match the actual function definition.
The poly1305_simd_init() is a bit suspicious here, as it previously
had a 32-byte argument type, but looks like it needs to take the
16-byte POLY1305_BLOCK_SIZE array instead.
Fixes: 1c08a10436 ("crypto: poly1305 - add new 32 and 64-bit generic versions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use the of_device_get_match_data() helper instead of open coding.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove some dead code that was left over following commit 90ea1c6436
("random: remove the blocking pool").
Cc: linux-crypto@vger.kernel.org
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On big endian CPUs, the ChaCha20-based CRNG is using the wrong
endianness for the ChaCha20 constants.
This doesn't matter cryptographically, but technically it means it's not
ChaCha20 anymore. Fix it to always use the standard constants.
Cc: linux-crypto@vger.kernel.org
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto_stats_get() is a no-op when the kernel is compiled without
CONFIG_CRYPTO_STATS, so pairing it with crypto_alg_put() unconditionally
(as crypto_rng_reset() does) is wrong.
Fix this by moving the call to crypto_stats_get() to just before the
actual algorithm operation which might need it. This makes it always
paired with crypto_stats_rng_seed().
Fixes: eed74b3eba ("crypto: rng - Fix a refcounting bug in crypto_rng_reset()")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The opening comment mark '/**' is used for highlighting the beginning of
kernel-doc comments.
There are certain files in drivers/crypto/nx, which follow this syntax,
but the content inside does not comply with kernel-doc.
Such lines were probably not meant for kernel-doc parsing, but are parsed
due to the presence of kernel-doc like comment syntax(i.e, '/**'), which
causes unexpected warnings from kernel-doc.
E.g., presence of kernel-doc like comment in the header lines for
drivers/crypto/nx/nx-sha256.c at header causes these warnings:
"warning: Function parameter or member 'tfm' not described in 'nx_crypto_ctx_sha256_init'"
"warning: expecting prototype for SHA(). Prototype was for nx_crypto_ctx_sha256_init() instead"
Similarly for other files too.
Provide a simple fix by replacing such occurrences with general comment
format, i.e. '/*', to prevent kernel-doc from parsing it.
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The opening comment mark '/**' is used for highlighting the beginning of
kernel-doc comments.
There are certain files in drivers/crypto/ux500, which follow this syntax,
but the content inside does not comply with kernel-doc.
Such lines were probably not meant for kernel-doc parsing, but are parsed
due to the presence of kernel-doc like comment syntax(i.e, '/**'), which
causes unexpected warnings from kernel-doc.
E.g., presence of kernel-doc like comment in the header lines for
drivers/crypto/ux500/cryp/cryp.h at header causes this warning:
"warning: expecting prototype for ST(). Prototype was for _CRYP_H_() instead"
Similarly for other files too.
Provide a simple fix by replacing such occurrences with general comment
format, i.e. '/*', to prevent kernel-doc from parsing it.
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The opening comment mark '/**' is used for highlighting the beginning of
kernel-doc comments.
There are certain files in drivers/crypto/amcc, which follow this syntax,
but the content inside does not comply with kernel-doc.
Such lines were probably not meant for kernel-doc parsing, but are parsed
due to the presence of kernel-doc like comment syntax(i.e, '/**'), which
causes unexpected warnings from kernel-doc.
E.g., presence of kernel-doc like comment in
drivers/crypto/amcc/crypto4xx_alg.c at header, and some other lines,
causes these warnings by kernel-doc:
"warning: expecting prototype for AMCC SoC PPC4xx Crypto Driver(). Prototype was for set_dynamic_sa_command_0() instead"
"warning: Function parameter or member 'dir' not described in 'set_dynamic_sa_command_0'"
etc..
Provide a simple fix by replacing such occurrences with general comment
format, i.e. '/*', to prevent kernel-doc from parsing it.
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The opening comment mark '/**' is used for highlighting the beginning of
kernel-doc comments.
There are certain files in drivers/crypto/vmx, which follow this syntax,
but the content inside does not comply with kernel-doc.
Such lines were probably not meant for kernel-doc parsing, but are parsed
due to the presence of kernel-doc like comment syntax(i.e, '/**'), which
causes unexpected warnings from kernel-doc.
E.g., presence of kernel-doc like comment in the header line for
drivers/crypto/vmx/vmx.c causes this warning by kernel-doc:
"warning: expecting prototype for Routines supporting VMX instructions on the Power 8(). Prototype was for p8_init() instead"
Similarly for other files too.
Provide a simple fix by replacing such occurrences with general comment
format, i.e. '/*', to prevent kernel-doc from parsing it.
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kunpeng930 supports doorbell isolation to ensure that each queue
has an independent doorbell address space.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kunpeng930 supports queue doorbell isolation.
When doorbell isolation is enabled, it supports to obtain the
maximum number of queues of one function from hardware register.
Otherwise, the 'max_qp_num' is the total number of queues.
When assigning queues to VF, it is necessary to ensure that the number
of VF queues does not exceed 'max_qp_num'.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since the code related to 'CURRENT_QM' debugfs is exactly same in
sec/hpre/zip driver, move 'CURRENT_QM' to qm.c to reduce duplicate code.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move the configuration of the total number of queues 'ctrl_qp_num'
from sec2/hpre/zip to qm.c. And get the total number of queues
from the hardware register for Kunpeng930.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When calling "hpre_ctx_set" fails, stop and put qp,
otherwise will leak qp resource.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
System may be able to get physical address of zero if not reserved by
firmware.
The dma address obtained by 'dma_alloc_coherent' is valid, since already
checking cpu va before, so do not check again.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is redundant code especially when registing new algorithms
in the future.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
'CRYPTO_DH' has selected in 'Kconfig', so delete 'CONFIG_CRYPTO_DH'.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ADF_STATUS_PF_RUNNING is (only) used and checked by adf_vf2pf_shutdown()
before calling adf_iov_putmsg()->mutex_lock(vf2pf_lock), however the
vf2pf_lock is initialized in adf_dev_init(), which can fail and when it
fail, the vf2pf_lock is either not initialized or destroyed, a subsequent
use of vf2pf_lock will cause issue.
To fix this issue, only set this flag if adf_dev_init() returns 0.
[ 7.178404] BUG: KASAN: user-memory-access in __mutex_lock.isra.0+0x1ac/0x7c0
[ 7.180345] Call Trace:
[ 7.182576] mutex_lock+0xc9/0xd0
[ 7.183257] adf_iov_putmsg+0x118/0x1a0 [intel_qat]
[ 7.183541] adf_vf2pf_shutdown+0x4d/0x7b [intel_qat]
[ 7.183834] adf_dev_shutdown+0x172/0x2b0 [intel_qat]
[ 7.184127] adf_probe+0x5e9/0x600 [qat_dh895xccvf]
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Fixes: 25c6ffb249 ("crypto: qat - check if PF is running")
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes the following W=1 kernel build warning(s):
drivers/crypto/cavium/nitrox/nitrox_isr.c:17: warning: expecting prototype for One vector for each type of ring(). Prototype was for NR_RING_VECTORS() instead
drivers/crypto/cavium/nitrox/nitrox_isr.c:224: warning: Function parameter or member 'irq' not described in 'nps_core_int_isr'
drivers/crypto/cavium/nitrox/nitrox_isr.c:224: warning: Function parameter or member 'data' not described in 'nps_core_int_isr'
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes the following W=1 kernel build warning(s):
drivers/crypto/nx/nx-aes-cbc.c:24: warning: Function parameter or member 'tfm' not described in 'cbc_aes_nx_set_key'
drivers/crypto/nx/nx-aes-cbc.c:24: warning: Function parameter or member 'in_key' not described in 'cbc_aes_nx_set_key'
drivers/crypto/nx/nx-aes-cbc.c:24: warning: Function parameter or member 'key_len' not described in 'cbc_aes_nx_set_key'
drivers/crypto/nx/nx-aes-cbc.c:24: warning: expecting prototype for Nest Accelerators driver(). Prototype was for cbc_aes_nx_set_key() instead
drivers/crypto/nx/nx_debugfs.c:34: warning: Function parameter or member 'drv' not described in 'nx_debugfs_init'
drivers/crypto/nx/nx_debugfs.c:34: warning: expecting prototype for Nest Accelerators driver(). Prototype was for nx_debugfs_init() instead
drivers/crypto/nx/nx.c:31: warning: Incorrect use of kernel-doc format: * nx_hcall_sync - make an H_COP_OP hcall for the passed in op structure
drivers/crypto/nx/nx.c:43: warning: Function parameter or member 'nx_ctx' not described in 'nx_hcall_sync'
drivers/crypto/nx/nx.c:43: warning: Function parameter or member 'op' not described in 'nx_hcall_sync'
drivers/crypto/nx/nx.c:43: warning: Function parameter or member 'may_sleep' not described in 'nx_hcall_sync'
drivers/crypto/nx/nx.c:43: warning: expecting prototype for Nest Accelerators driver(). Prototype was for nx_hcall_sync() instead
drivers/crypto/nx/nx.c:209: warning: Function parameter or member 'nbytes' not described in 'trim_sg_list'
Cc: "Breno Leitão" <leitao@debian.org>
Cc: Nayna Jain <nayna@linux.ibm.com>
Cc: Paulo Flabiano Smorigo <pfsmorigo@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Kent Yoder <yoder1@us.ibm.com>
Cc: linux-crypto@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes the following W=1 kernel build warning(s):
drivers/crypto/vmx/vmx.c:23: warning: expecting prototype for Routines supporting VMX instructions on the Power 8(). Prototype was for p8_init() instead
Cc: "Breno Leitão" <leitao@debian.org>
Cc: Nayna Jain <nayna@linux.ibm.com>
Cc: Paulo Flabiano Smorigo <pfsmorigo@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Henrique Cerri <mhcerri@br.ibm.com>
Cc: linux-crypto@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes the following W=1 kernel build warning(s):
drivers/crypto/caam/caampkc.c:199: warning: expecting prototype for from a given scatterlist(). Prototype was for caam_rsa_count_leading_zeros() instead
drivers/crypto/caam/caamalg_qi2.c:87: warning: Function parameter or member 'xts_key_fallback' not described in 'caam_ctx'
drivers/crypto/caam/caamalg_qi2.c:87: warning: Function parameter or member 'fallback' not described in 'caam_ctx'
Cc: "Horia Geantă" <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes the following W=1 kernel build warning(s):
drivers/crypto/keembay/ocs-hcu.c:107: warning: expecting prototype for struct ocs_hcu_dma_list. Prototype was for struct ocs_hcu_dma_entry instead
drivers/crypto/keembay/ocs-hcu.c:127: warning: expecting prototype for struct ocs_dma_list. Prototype was for struct ocs_hcu_dma_list instead
drivers/crypto/keembay/ocs-hcu.c:610: warning: expecting prototype for ocs_hcu_digest(). Prototype was for ocs_hcu_hash_update() instead
drivers/crypto/keembay/ocs-hcu.c:648: warning: expecting prototype for ocs_hcu_hash_final(). Prototype was for ocs_hcu_hash_finup() instead
Cc: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Cc: Declan Murphy <declan.murphy@intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The ones remove here not only fail to conform to kernel-doc, but also
provide no value, so let's remove them completely in this case.
Fixes the following W=1 kernel build warning(s):
drivers/crypto/ux500/hash/hash_core.c:368: warning: Function parameter or member 'ctx' not described in 'hash_get_device_data'
drivers/crypto/ux500/hash/hash_core.c:368: warning: Excess function parameter 'hash_ctx' description in 'hash_get_device_data'
drivers/crypto/ux500/hash/hash_core.c:551: warning: expecting prototype for hash_init(). Prototype was for ux500_hash_init() instead
drivers/crypto/ux500/hash/hash_core.c:592: warning: Function parameter or member 'length' not described in 'hash_processblock'
drivers/crypto/ux500/hash/hash_core.c:1302: warning: expecting prototype for hash_update(). Prototype was for ahash_update() instead
drivers/crypto/ux500/hash/hash_core.c:1322: warning: expecting prototype for hash_final(). Prototype was for ahash_final() instead
drivers/crypto/ux500/hash/hash_core.c:1622: warning: Function parameter or member 'device_data' not described in 'ahash_algs_register_all'
drivers/crypto/ux500/hash/hash_core.c:1622: warning: expecting prototype for hash_algs_register_all(). Prototype was for ahash_algs_register_all() instead
drivers/crypto/ux500/hash/hash_core.c:1647: warning: Function parameter or member 'device_data' not described in 'ahash_algs_unregister_all'
drivers/crypto/ux500/hash/hash_core.c:1647: warning: expecting prototype for hash_algs_unregister_all(). Prototype was for ahash_algs_unregister_all() instead
drivers/crypto/ux500/cryp/cryp.c:19: warning: Incorrect use of kernel-doc format: * cryp_wait_until_done - wait until the device logic is not busy
drivers/crypto/ux500/cryp/cryp.c:22: warning: Function parameter or member 'device_data' not described in 'cryp_wait_until_done'
drivers/crypto/ux500/cryp/cryp.c:22: warning: expecting prototype for ST(). Prototype was for cryp_wait_until_done() instead
drivers/crypto/ux500/cryp/cryp.c:292: warning: Function parameter or member 'cryp_mode' not described in 'cryp_save_device_context'
drivers/crypto/ux500/cryp/cryp_irq.c:21: warning: Function parameter or member 'device_data' not described in 'cryp_enable_irq_src'
drivers/crypto/ux500/cryp/cryp_irq.c:21: warning: Function parameter or member 'irq_src' not described in 'cryp_enable_irq_src'
drivers/crypto/ux500/cryp/cryp_irq.c:21: warning: expecting prototype for ST(). Prototype was for cryp_enable_irq_src() instead
drivers/crypto/ux500/cryp/cryp_core.c:42: warning: expecting prototype for ST(). Prototype was for CRYP_MAX_KEY_SIZE() instead
drivers/crypto/ux500/cryp/cryp_core.c:91: warning: Function parameter or member 'key' not described in 'cryp_ctx'
drivers/crypto/ux500/cryp/cryp_core.c:91: warning: Function parameter or member 'session_id' not described in 'cryp_ctx'
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Shujuan Chen <shujuan.chen@stericsson.com>
Cc: Joakim Bech <joakim.xx.bech@stericsson.com>
Cc: Berne Hebark <berne.herbark@stericsson.com>
Cc: Niklas Hernaeus <niklas.hernaeus@stericsson.com>
Cc: Jonas Linde <jonas.linde@stericsson.com>
Cc: Andreas Westin <andreas.westin@stericsson.com>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes the following W=1 kernel build warning(s):
drivers/crypto/chelsio/chcr_core.c:2: warning: wrong kernel-doc identifier on line:
drivers/crypto/chelsio/chcr_algo.c:806: warning: Function parameter or member 'wrparam' not described in 'create_cipher_wr'
drivers/crypto/chelsio/chcr_algo.c:806: warning: Excess function parameter 'req' description in 'create_cipher_wr'
drivers/crypto/chelsio/chcr_algo.c:806: warning: Excess function parameter 'ctx' description in 'create_cipher_wr'
drivers/crypto/chelsio/chcr_algo.c:806: warning: Excess function parameter 'qid' description in 'create_cipher_wr'
drivers/crypto/chelsio/chcr_algo.c:806: warning: Excess function parameter 'op_type' description in 'create_cipher_wr'
drivers/crypto/chelsio/chcr_algo.c:1566: warning: Function parameter or member 'req' not described in 'create_hash_wr'
drivers/crypto/chelsio/chcr_algo.c:1566: warning: Function parameter or member 'param' not described in 'create_hash_wr'
Cc: Ayush Sawal <ayush.sawal@chelsio.com>
Cc: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
Cc: Rohit Maheshwari <rohitm@chelsio.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Manoj Malviya <manojmalviya@chelsio.com>
Cc: Atul Gupta <atul.gupta@chelsio.com>
Cc: Jitendra Lulla <jlulla@chelsio.com>
Cc: M R Gowda <yeshaswi@chelsio.com>
Cc: Harsh Jain <harsh@chelsio.com>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes the following W=1 kernel build warning(s):
drivers/crypto/bcm/util.c:136: warning: Function parameter or member 'from_nents' not described in 'spu_msg_sg_add'
drivers/crypto/bcm/util.c:136: warning: Function parameter or member 'length' not described in 'spu_msg_sg_add'
drivers/crypto/bcm/spu.c:464: warning: Excess function parameter 'Return' description in 'spum_gcm_ccm_pad_len'
drivers/crypto/bcm/spu.c:524: warning: Function parameter or member 'iv_len' not described in 'spum_aead_ivlen'
drivers/crypto/bcm/spu.c:524: warning: expecting prototype for spu_aead_ivlen(). Prototype was for spum_aead_ivlen() instead
drivers/crypto/bcm/spu.c:556: warning: Function parameter or member 'alg_digest_size' not described in 'spum_digest_size'
drivers/crypto/bcm/spu.c:556: warning: Function parameter or member 'alg' not described in 'spum_digest_size'
drivers/crypto/bcm/spu.c:556: warning: Function parameter or member 'htype' not described in 'spum_digest_size'
drivers/crypto/bcm/spu.c:583: warning: bad line:
drivers/crypto/bcm/spu.c:927: warning: Function parameter or member 'is_inbound' not described in 'spum_cipher_req_finish'
drivers/crypto/bcm/spu.c:927: warning: Excess function parameter 'isInbound' description in 'spum_cipher_req_finish'
drivers/crypto/bcm/spu2.c:557: warning: Function parameter or member 'fmd' not described in 'spu2_fmd_init'
drivers/crypto/bcm/spu2.c:557: warning: Function parameter or member 'spu2_type' not described in 'spu2_fmd_init'
drivers/crypto/bcm/spu2.c:557: warning: Excess function parameter 'spu2_cipher_type' description in 'spu2_fmd_init'
drivers/crypto/bcm/spu2.c:615: warning: Function parameter or member 'auth_first' not described in 'spu2_fmd_ctrl0_write'
drivers/crypto/bcm/spu2.c:615: warning: Excess function parameter 'authFirst' description in 'spu2_fmd_ctrl0_write'
drivers/crypto/bcm/spu2.c:666: warning: Function parameter or member 'is_inbound' not described in 'spu2_fmd_ctrl1_write'
drivers/crypto/bcm/spu2.c:803: warning: expecting prototype for spu_payload_length(). Prototype was for spu2_payload_length() instead
drivers/crypto/bcm/spu2.c:825: warning: Function parameter or member 'is_hash' not described in 'spu2_response_hdr_len'
drivers/crypto/bcm/spu2.c:825: warning: expecting prototype for spu_response_hdr_len(). Prototype was for spu2_response_hdr_len() instead
drivers/crypto/bcm/spu2.c:843: warning: expecting prototype for spu_hash_pad_len(). Prototype was for spu2_hash_pad_len() instead
drivers/crypto/bcm/spu2.c:855: warning: Function parameter or member 'cipher_mode' not described in 'spu2_gcm_ccm_pad_len'
drivers/crypto/bcm/spu2.c:855: warning: Function parameter or member 'data_size' not described in 'spu2_gcm_ccm_pad_len'
drivers/crypto/bcm/spu2.c:855: warning: expecting prototype for spu2_gcm_ccm_padlen(). Prototype was for spu2_gcm_ccm_pad_len() instead
drivers/crypto/bcm/spu2.c:872: warning: expecting prototype for spu_assoc_resp_len(). Prototype was for spu2_assoc_resp_len() instead
drivers/crypto/bcm/spu2.c:919: warning: Function parameter or member 'alg_digest_size' not described in 'spu2_digest_size'
drivers/crypto/bcm/spu2.c:919: warning: Function parameter or member 'alg' not described in 'spu2_digest_size'
drivers/crypto/bcm/spu2.c:919: warning: Function parameter or member 'htype' not described in 'spu2_digest_size'
drivers/crypto/bcm/spu2.c:945: warning: expecting prototype for spu_create_request(). Prototype was for spu2_create_request() instead
drivers/crypto/bcm/spu2.c:1122: warning: expecting prototype for spu_cipher_req_init(). Prototype was for spu2_cipher_req_init() instead
drivers/crypto/bcm/spu2.c:1182: warning: Function parameter or member 'is_inbound' not described in 'spu2_cipher_req_finish'
drivers/crypto/bcm/spu2.c:1182: warning: expecting prototype for spu_cipher_req_finish(). Prototype was for spu2_cipher_req_finish() instead
drivers/crypto/bcm/spu2.c:1243: warning: expecting prototype for spu_request_pad(). Prototype was for spu2_request_pad() instead
drivers/crypto/bcm/spu2.c:1321: warning: expecting prototype for spu_status_process(). Prototype was for spu2_status_process() instead
drivers/crypto/bcm/cipher.c:1048: warning: Function parameter or member 'req' not described in 'spu_aead_rx_sg_create'
drivers/crypto/bcm/cipher.c:2966: warning: Function parameter or member 'cipher' not described in 'rfc4543_gcm_esp_setkey'
drivers/crypto/bcm/cipher.c:2966: warning: Function parameter or member 'key' not described in 'rfc4543_gcm_esp_setkey'
drivers/crypto/bcm/cipher.c:2966: warning: Function parameter or member 'keylen' not described in 'rfc4543_gcm_esp_setkey'
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Rob Rice <rob.rice@broadcom.com>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes the following W=1 kernel build warning(s):
drivers/crypto/hisilicon/sec/sec_drv.c:843: warning: Function parameter or member 'queue' not described in 'sec_queue_empty'
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Zaibo Xu <xuzaibo@huawei.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch fixes the following checkpatch.pl warnings:
crypto/jitterentropy.c:600: WARNING: Comparisons should place the constant on the right side of the test
crypto/jitterentropy.c:681: WARNING: Comparisons should place the constant on the right side of the test
crypto/jitterentropy.c:772: WARNING: Comparisons should place the constant on the right side of the test
crypto/jitterentropy.c:829: WARNING: Comparisons should place the constant on the right side of the test
Signed-off-by: Milan Djurovic <mdjurovic@zohomail.com>
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix the following coccicheck warning:
drivers/char/hw_random/core.c:399:8-16: WARNING: use scnprintf or sprintf.
Signed-off-by: Zihao Tang <tangzihao1@hisilicon.com>
Signed-off-by: Jay Fang <f.fangjian@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For function dma_unmap_sg(), the <nents> parameter should be number of
elements in the scatterlist prior to the mapping, not after the mapping.
So fix this usage.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Acked-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Tested-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For function dma_unmap_sg(), the <nents> parameter should be number of
elements in the scatterlist prior to the mapping, not after the mapping.
So fix this usage.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For function dma_unmap_sg(), the <nents> parameter should be number of
elements in the scatterlist prior to the mapping, not after the mapping.
So fix this usage.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For function dma_unmap_sg(), the <nents> parameter should be number of
elements in the scatterlist prior to the mapping, not after the mapping.
So fix this usage.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Multiple threads or clients can submit a command to the TEE ring
buffer. This patch helps to synchronize command submission to the
ring.
One thread shall write a command to a TEE ring buffer entry only if:
- Trusted OS has notified that the TEE command for the given entry
has been processed and driver has copied the TEE response into
client buffer.
- The command entry is empty and can be written into.
After a command has been written to the TEE ring buffer, the global
wptr (mutex protected) shall be incremented for use by next client.
If PSP became unresponsive while processing TEE request from a
client, then further command submission to queue will be disabled.
Fixes: 33960acccf (crypto: ccp - add TEE support for Raven Ridge)
Reviewed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The PSP TEE device driver polls the command status variable every
5ms to check for command completion. Reduce this time to 1ms so that
there is an improvement in driver response time to clients which submit
TEE commands.
Reviewed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This commit fixes the checkpatch warning:
WARNING: Use #include <linux/io.h> instead of <asm/io.h>
34: FILE: drivers/char/hw_random/intel-rng.c:34:
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Prepare the x509 parser to accept NIST P384 certificates and add the
OID for ansip384r1, which is the identifier for NIST P384.
Summary of changes:
* crypto/asymmetric_keys/x509_cert_parser.c
- prepare x509 parser to load NIST P384
* include/linux/oid_registry.h
- add OID_ansip384r1
Signed-off-by: Saulo Alessandre <saulo.alessandre@tse.jus.br>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for IMA signature verification for EC keys. Since SHA type
of hashes can be used by RSA and ECDSA signature schemes we need to
look at the key and derive from the key which signature scheme to use.
Since this can be applied to all types of keys, we change the selection
of the encoding type to be driven by the key's signature scheme rather
than by the hash type.
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: linux-integrity@vger.kernel.org
Cc: David Howells <dhowells@redhat.com>
Cc: keyrings@vger.kernel.org
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Vitaly Chikunov <vt@altlinux.org>
Reviewed-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for parsing of x509 certificates that contain ECDSA keys,
such as NIST P256, that have been signed by a CA using any of the
current SHA hash algorithms.
Cc: David Howells <dhowells@redhat.com>
Cc: keyrings@vger.kernel.org
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Detect whether a key is an sm2 type of key by its OID in the parameters
array rather than assuming that everything under OID_id_ecPublicKey
is sm2, which is not the case.
Cc: David Howells <dhowells@redhat.com>
Cc: keyrings@vger.kernel.org
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Tested-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Register NIST P384 as an akcipher and extend the testmgr with
NIST P384-specific test vectors.
Summary of changes:
* crypto/ecdsa.c
- add ecdsa_nist_p384_init_tfm
- register and unregister P384 tfm
* crypto/testmgr.c
- add test vector for P384 on vector of tests
* crypto/testmgr.h
- add test vector params for P384(sha1, sha224, sha256, sha384
and sha512)
Signed-off-by: Saulo Alessandre <saulo.alessandre@tse.jus.br>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the math needed for NIST P384 and adapt certain functions'
parameters so that the ecc_curve is passed to vli_mmod_fast. This
allows to identify the curve by its name prefix and the appropriate
function for fast mmod calculation can be used.
Summary of changes:
* crypto/ecc.c
- add vli_mmod_fast_384
- change some routines to pass ecc_curve forward until vli_mmod_fast
* crypto/ecc.h
- add ECC_CURVE_NIST_P384_DIGITS
- change ECC_MAX_DIGITS to P384 size
Signed-off-by: Saulo Alessandre <saulo.alessandre@tse.jus.br>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add the parameters for the NIST P384 curve and define a new curve ID
for it. Make the curve available in ecc_get_curve.
Summary of changes:
* crypto/ecc_curve_defs.h
- add nist_p384 params
* include/crypto/ecdh.h
- add ECC_CURVE_NIST_P384
* crypto/ecc.c
- change ecc_get_curve to accept nist_p384
Signed-off-by: Saulo Alessandre <saulo.alessandre@tse.jus.br>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for parsing the parameters of a NIST P256 or NIST P192 key.
Enable signature verification using these keys. The new module is
enabled with CONFIG_ECDSA:
Elliptic Curve Digital Signature Algorithm (NIST P192, P256 etc.)
is A NIST cryptographic standard algorithm. Only signature verification
is implemented.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
