2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-21 11:44:01 +08:00
Commit Graph

1366 Commits

Author SHA1 Message Date
Linus Torvalds
93c26d7dc0 Merge branch 'mm-pkeys-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull protection keys syscall interface from Thomas Gleixner:
 "This is the final step of Protection Keys support which adds the
  syscalls so user space can actually allocate keys and protect memory
  areas with them. Details and usage examples can be found in the
  documentation.

  The mm side of this has been acked by Mel"

* 'mm-pkeys-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/pkeys: Update documentation
  x86/mm/pkeys: Do not skip PKRU register if debug registers are not used
  x86/pkeys: Fix pkeys build breakage for some non-x86 arches
  x86/pkeys: Add self-tests
  x86/pkeys: Allow configuration of init_pkru
  x86/pkeys: Default to a restrictive init PKRU
  pkeys: Add details of system call use to Documentation/
  generic syscalls: Wire up memory protection keys syscalls
  x86: Wire up protection keys system calls
  x86/pkeys: Allocation/free syscalls
  x86/pkeys: Make mprotect_key() mask off additional vm_flags
  mm: Implement new pkey_mprotect() system call
  x86/pkeys: Add fault handling for PF_PK page fault bit
2016-10-10 11:01:51 -07:00
Linus Torvalds
6218590bcb KVM updates for v4.9-rc1
All architectures:
   Move `make kvmconfig` stubs from x86;  use 64 bits for debugfs stats.
 
 ARM:
   Important fixes for not using an in-kernel irqchip; handle SError
   exceptions and present them to guests if appropriate; proxying of GICV
   access at EL2 if guest mappings are unsafe; GICv3 on AArch32 on ARMv8;
   preparations for GICv3 save/restore, including ABI docs; cleanups and
   a bit of optimizations.
 
 MIPS:
   A couple of fixes in preparation for supporting MIPS EVA host kernels;
   MIPS SMP host & TLB invalidation fixes.
 
 PPC:
   Fix the bug which caused guests to falsely report lockups; other minor
   fixes; a small optimization.
 
 s390:
   Lazy enablement of runtime instrumentation; up to 255 CPUs for nested
   guests; rework of machine check deliver; cleanups and fixes.
 
 x86:
   IOMMU part of AMD's AVIC for vmexit-less interrupt delivery; Hyper-V
   TSC page; per-vcpu tsc_offset in debugfs; accelerated INS/OUTS in
   nVMX; cleanups and fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABCAAGBQJX9iDrAAoJEED/6hsPKofoOPoIAIUlgojkb9l2l1XVDgsXdgQL
 sRVhYSVv7/c8sk9vFImrD5ElOPZd+CEAIqFOu45+NM3cNi7gxip9yftUVs7wI5aC
 eDZRWm1E4trDZLe54ZM9ThcqZzZZiELVGMfR1+ZndUycybwyWzafpXYsYyaXp3BW
 hyHM3qVkoWO3dxBWFwHIoO/AUJrWYkRHEByKyvlC6KPxSdBPSa5c1AQwMCoE0Mo4
 K/xUj4gBn9eMelNhg4Oqu/uh49/q+dtdoP2C+sVM8bSdquD+PmIeOhPFIcuGbGFI
 B+oRpUhIuntN39gz8wInJ4/GRSeTuR2faNPxMn4E1i1u4LiuJvipcsOjPfe0a18=
 =fZRB
 -----END PGP SIGNATURE-----

Merge tag 'kvm-4.9-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Radim Krčmář:
 "All architectures:
   - move `make kvmconfig` stubs from x86
   - use 64 bits for debugfs stats

  ARM:
   - Important fixes for not using an in-kernel irqchip
   - handle SError exceptions and present them to guests if appropriate
   - proxying of GICV access at EL2 if guest mappings are unsafe
   - GICv3 on AArch32 on ARMv8
   - preparations for GICv3 save/restore, including ABI docs
   - cleanups and a bit of optimizations

  MIPS:
   - A couple of fixes in preparation for supporting MIPS EVA host
     kernels
   - MIPS SMP host & TLB invalidation fixes

  PPC:
   - Fix the bug which caused guests to falsely report lockups
   - other minor fixes
   - a small optimization

  s390:
   - Lazy enablement of runtime instrumentation
   - up to 255 CPUs for nested guests
   - rework of machine check deliver
   - cleanups and fixes

  x86:
   - IOMMU part of AMD's AVIC for vmexit-less interrupt delivery
   - Hyper-V TSC page
   - per-vcpu tsc_offset in debugfs
   - accelerated INS/OUTS in nVMX
   - cleanups and fixes"

* tag 'kvm-4.9-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (140 commits)
  KVM: MIPS: Drop dubious EntryHi optimisation
  KVM: MIPS: Invalidate TLB by regenerating ASIDs
  KVM: MIPS: Split kernel/user ASID regeneration
  KVM: MIPS: Drop other CPU ASIDs on guest MMU changes
  KVM: arm/arm64: vgic: Don't flush/sync without a working vgic
  KVM: arm64: Require in-kernel irqchip for PMU support
  KVM: PPC: Book3s PR: Allow access to unprivileged MMCR2 register
  KVM: PPC: Book3S PR: Support 64kB page size on POWER8E and POWER8NVL
  KVM: PPC: Book3S: Remove duplicate setting of the B field in tlbie
  KVM: PPC: BookE: Fix a sanity check
  KVM: PPC: Book3S HV: Take out virtual core piggybacking code
  KVM: PPC: Book3S: Treat VTB as a per-subcore register, not per-thread
  ARM: gic-v3: Work around definition of gic_write_bpr1
  KVM: nVMX: Fix the NMI IDT-vectoring handling
  KVM: VMX: Enable MSR-BASED TPR shadow even if APICv is inactive
  KVM: nVMX: Fix reload apic access page warning
  kvmconfig: add virtio-gpu to config fragment
  config: move x86 kvm_guest.config to a common location
  arm64: KVM: Remove duplicating init code for setting VMID
  ARM: KVM: Support vgic-v3
  ...
2016-10-06 10:49:01 -07:00
Linus Torvalds
6a497e9d58 This is the bulk of GPIO changes for the v4.9 series:
Subsystem improvements:
 
 - Do away with the last users of the obsolete Kconfig options
   ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB (the latter
   always sounded like an item on a wishlist to Santa Claus to
   me). We can now select GPIOLIB and be done with it, for all
   archs. After some struggle it even work on UM. Not that it has
   GPIO, but if it wants to, it can select the library.
 
 - Continued efforts to make drivers properly either tristate or
   bool.
 
 - Introduce a warning for drivers assigning default triggers to
   their irqchip lines when probed from device tree, so we find and
   fix these ambigous drivers. It is agreed that in the OF config
   path, the device tree defines trigger characteristics.
 
 - The same warning, mutatis mutandis, for ACPI-probed GPIO
   irqchips.
 
 - We introduce the ability to mark certain IRQ lines as "unusable"
   as they can be taken by BIOS/firmware, unrouted in silicon and
   generally nasty if you use them, and such things. This is
   put to good use in the STMPE driver and also in the Cherryview
   pin control driver.
 
 - A new "mockup" virtual GPIO device that can be used for testing.
   The plan is to add unit tests under tools/* for exercising this
   device and verify that the kernel code paths are working as they
   should.
 
 - Make memory-mapped I/O-drivers depend on HAS_IOMEM. This was
   implicit all the time, but when people started building UM
   with allyesconfig or allmodconfig it exploded in their face.
 
 - Move some stray bits of device tree and ACPI HW description
   callbacks down into their respective implementation silo. These
   were causing issues when compiling on !HAS_IOMEM as well, so
   now eventually UM compiles the GPIOLIB library if it wants to.
 
 New drivers:
 
 - New driver for the Aspeed GPIO front-end companion to the
   pin controller merged through the pin control tree.
 
 - New driver for the LP873x PMIC GPIO portions.
 
 - New driver for Technologic Systems' I2C FPGA GPIO such as
   TS4900, TS-7970, TS-7990 and TS-4100.
 
 - New driver for the Broadcom BCM63xx series including BCM6338
   and BCM6345.
 
 - New driver for the Intel WhiskeyCove PMIC GPIO.
 
 - New driver for the Allwinner AXP209 PMIC GPIO portions.
 
 - New driver for Diamond Systems 48 line GPIO-MM, another of
   these port-mapped I/O expansion cards.
 
 - Support the STMicroelectronics STMPE1600 variant in the STMPE
   driver.
 
 Driver improvements:
 
 - The STMPE driver now supports rising/falling edge detection
   properly for IRQs.
 
 - The PCA954x will now fetch and enable its VCC regulator properly.
 
 - Major rework of the PCA953x driver with the goal of eventually
   switching it over to use regmap and thus modernize it even more.
 
 - Switch the IOP driver to use the generic MMIO GPIO library.
 
 - Move the ages old HTC EGPIO (extended GPIO) GPIO expander driver
   over to this subsystem from MFD, achieveing some separation of
   concerns.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJX9OvDAAoJEEEQszewGV1zsPQP/3VLy1fNIpMF0DDyq5tA/GNv
 sinnaPgMtt+qBrM2sbJcTVwV9xtHrs12CC3+2lAhBCIEm4YfHbXvaUMNE+aKJzk4
 ZM7/rb8WMUxjQqzDKStdETsQGo6fxh0qU81OEQNbX9alir20jik9DvTufcs6xCgx
 sqh8KsNGO4Y6tiuKZ6mTZvIjVhMwiTm0NBSDKhdim0DdsOcuxyh6xVOj/0LB2Ei6
 g75X1w++wjh0ryY3bzaeWkQSlXDC6eEKeez7VaEkSUyrxH86buomy0+aP0fqs7vY
 LRZzn/TC97YLT6hslS/OhB7uXrDIY2POSwO/SvusJcveGP7WPGyGr5mDtA4ATRWI
 ios0DBWl629kHfhAMzg3kPJS8LfjCerapvtbdAgqvhH+Vb5IPFx45vypDkR2WtJ7
 bNAySIRMQSHZvJSCvYzjqh8AbWdE4i4k70tFXRMOpWeKIvRVI1cDvLD6cLn3hATM
 IPTytM6i2xqnzcq7mK7EJ18afcR0mv1jHgGAv4M0RMkyJ2IrURvFyZIvUB2MTyuL
 PEBh1ZvTs+MO50eeFwzltY91eagkzgWB0f6sm3l7I7bL2oxE2f/WVcVL9jWbgwpF
 otjFO27u0/6rIulfLUQzDo3gbOq7UaN0VTW4E9CYbOtFtNzCxjFIKTv0IJhTu4TT
 OSur7oFpzAMOGYlpYP8j
 =ABbi
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.9 series:

  Subsystem improvements:

   - do away with the last users of the obsolete Kconfig options
     ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB (the latter
     always sounded like an item on a wishlist to Santa Claus to me). We
     can now select GPIOLIB and be done with it, for all archs. After
     some struggle it even work on UM. Not that it has GPIO, but if it
     wants to, it can select the library.

   - continued efforts to make drivers properly either tristate or bool.

   - introduce a warning for drivers assigning default triggers to their
     irqchip lines when probed from device tree, so we find and fix
     these ambigous drivers. It is agreed that in the OF config path,
     the device tree defines trigger characteristics.

   - the same warning, mutatis mutandis, for ACPI-probed GPIO irqchips.

   - we introduce the ability to mark certain IRQ lines as "unusable" as
     they can be taken by BIOS/firmware, unrouted in silicon and
     generally nasty if you use them, and such things. This is put to
     good use in the STMPE driver and also in the Cherryview pin control
     driver.

   - a new "mockup" virtual GPIO device that can be used for testing.
     The plan is to add unit tests under tools/* for exercising this
     device and verify that the kernel code paths are working as they
     should.

   - make memory-mapped I/O-drivers depend on HAS_IOMEM. This was
     implicit all the time, but when people started building UM with
     allyesconfig or allmodconfig it exploded in their face.

   - move some stray bits of device tree and ACPI HW description
     callbacks down into their respective implementation silo. These
     were causing issues when compiling on !HAS_IOMEM as well, so now
     eventually UM compiles the GPIOLIB library if it wants to.

  New drivers:

   - new driver for the Aspeed GPIO front-end companion to the pin
     controller merged through the pin control tree.

   - new driver for the LP873x PMIC GPIO portions.

   - new driver for Technologic Systems' I2C FPGA GPIO such as TS4900,
     TS-7970, TS-7990 and TS-4100.

   - new driver for the Broadcom BCM63xx series including BCM6338 and
     BCM6345.

   - new driver for the Intel WhiskeyCove PMIC GPIO.

   - new driver for the Allwinner AXP209 PMIC GPIO portions.

   - new driver for Diamond Systems 48 line GPIO-MM, another of these
     port-mapped I/O expansion cards.

   - support the STMicroelectronics STMPE1600 variant in the STMPE
     driver.

  Driver improvements:

   - the STMPE driver now supports rising/falling edge detection
     properly for IRQs.

   - the PCA954x will now fetch and enable its VCC regulator properly.

   - major rework of the PCA953x driver with the goal of eventually
     switching it over to use regmap and thus modernize it even more.

   - switch the IOP driver to use the generic MMIO GPIO library.

   - move the ages old HTC EGPIO (extended GPIO) GPIO expander driver
     over to this subsystem from MFD, achieveing some separation of
     concerns"

* tag 'gpio-v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (81 commits)
  gpio: add missing static inline
  gpio: OF: localize some gpiochip init functions
  gpio: acpi: separation of concerns
  gpio: OF: separation of concerns
  gpio: make memory-mapped drivers depend on HAS_IOMEM
  gpio: stmpe: use BIT() macro
  gpio: stmpe: forbid unused lines to be mapped as IRQs
  mfd/gpio: Move HTC GPIO driver to GPIO subsystem
  gpio: MAINTAINERS: Add an entry for GPIO mockup driver
  gpio/mockup: add virtual gpio device
  gpio: Added zynq specific check for special pins on bank zero
  gpio: axp209: Implement get_direction
  gpio: aspeed: remove redundant return value check
  gpio: loongson1: remove redundant return value check
  ARM: omap2: fix missing include
  gpio: tc3589x: fix up complaints on unsigned
  gpio: tc3589x: add .get_direction() and small cleanup
  gpio: f7188x: use gpiochip_get_data instead of container_of
  gpio: tps65218: use devm_gpiochip_add_data() for gpio registration
  gpio: aspeed: fix return value check in aspeed_gpio_probe()
  ...
2016-10-05 11:49:09 -07:00
Linus Torvalds
02bafd96f3 This is the documentation update pull for the 4.9 merge window.
The Sphinx transition is still creating a fair amount of work.  Here we
 have a number of fixes and, importantly, a proper PDF output solution,
 thanks to Jani Nikula, Mauro Carvalho Chehab and Markus Heiser.
 
 I've started a couple of new books: a driver API book (based on the old
 device-drivers.tmpl) and a development tools book.  Both are meant to show
 how we can integrate together our existing documentation into a more
 coherent and accessible whole.  It involves moving some stuff around and
 formatting changes, but, I think, the results are worth it.  The good news
 is that most of our existing Documentation/*.txt files are *almost* in RST
 format already; the amount of messing around required is minimal.
 
 And, of course, there's the usual set of updates, typo fixes, and more.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJX8st8AAoJEI3ONVYwIuV6d10P/0Zsnx3hSSx22aHxP4kVb4s/
 NTttFAienYzc2fYYD3K/wMQbSbprW8Pp7uSP1suzAbU5FGgfLyDFQHnE0AVqFNiT
 MHVc5oBWp4ZlvNcyQUeXOsKtb5Rin00XHjer2mm/T9HfgmCYR4i+C9HQuv+J94Jf
 sgeI4IimvLjlp7dDbhcIfdqCpZ+UwBSpSm9w5f7astYDjocJHrkBqyk/46Ir4qz9
 +2joNZRWMUatrQYJWMJnnvlnx8lHhkDjaL/Egy+f7ucpddEkbGvWvabGCSMtCyzS
 CKlA53Y4wS59cNFkAuxsHjun4TcQhbZn/iBIM+8aOdameO0ksC4jSoND2P6N6vKF
 dHkAkayP9ChW3k/J8D+3cGIJNFiaYevEXcgxLyShjCuh4t4yfOC9aIGUl3Ye9/mR
 tiKpMsvzmwJ+yO+kzJsxWTmRAX5wdI1Z062ltiS1dmSbl3c3NgQFpfP7V7AJSQ7c
 DzkuoUnGEqJOHm64dAZQuxL4jj6StzejjxlhH0bIjbNn1a9VlX9afwsdJaXA+kmr
 jQHJtR0wD1mLMYYdvNEiqvcCbumG+kaXmH6eUQadRxruRdZyhi1Z6Ql1CtwQGtbR
 SetC/MVxIN3fGPbZYhJ162xVjQ8OeX0ndRmRjy6SBDMoRGSKqi2IME8JAGOshxE0
 0uYAJJFZOeiR6KaPnci/
 =kGKl
 -----END PGP SIGNATURE-----

Merge tag 'docs-4.9' of git://git.lwn.net/linux

Pull documentation updates from Jonathan Corbet:
 "This is the documentation update pull for the 4.9 merge window.

  The Sphinx transition is still creating a fair amount of work. Here we
  have a number of fixes and, importantly, a proper PDF output solution,
  thanks to Jani Nikula, Mauro Carvalho Chehab and Markus Heiser.

  I've started a couple of new books: a driver API book (based on the
  old device-drivers.tmpl) and a development tools book. Both are meant
  to show how we can integrate together our existing documentation into
  a more coherent and accessible whole. It involves moving some stuff
  around and formatting changes, but, I think, the results are worth it.
  The good news is that most of our existing Documentation/*.txt files
  are *almost* in RST format already; the amount of messing around
  required is minimal.

  And, of course, there's the usual set of updates, typo fixes, and
  more"

* tag 'docs-4.9' of git://git.lwn.net/linux: (120 commits)
  URL changed for Linux Foundation TAB
  dax : Fix documentation with respect to struct pages
  iio: Documentation: Correct the path used to create triggers.
  docs: Remove space-before-label guidance from CodingStyle
  docs-rst: add inter-document cross references
  Documentation/email-clients.txt: convert it to ReST markup
  Documentation/kernel-docs.txt: reorder based on timestamp
  Documentation/kernel-docs.txt: Add dates for online docs
  Documentation/kernel-docs.txt: get rid of broken docs
  Documentation/kernel-docs.txt: move in-kernel docs
  Documentation/kernel-docs.txt: remove more legacy references
  Documentation/kernel-docs.txt: add two published books
  Documentation/kernel-docs.txt: sort books per publication date
  Documentation/kernel-docs.txt: adjust LDD references
  Documentation/kernel-docs.txt: some improvements on the ReST output
  Documentation/kernel-docs.txt: Consistent indenting: 4 spaces
  Documentation/kernel-docs.txt: Add 4 paper/book references
  Documentation/kernel-docs.txt: Improve layouting of book list
  Documentation/kernel-docs.txt: Remove offline or outdated entries
  docs: Clean up bare :: lines
  ...
2016-10-04 13:54:07 -07:00
Linus Torvalds
e6445f52d9 USB/PHY/EXTCON patches for 4.9-rc1
Here is the big USB, and PHY, and extcon, patchsets for 4.9-rc1.
 
 Full details are in the shortlog, but generally a lot of new hardware
 support, usb gadget updates, and Wolfram's great cleanup of USB error
 message handling, making the kernel image a tad bit smaller.
 
 All of this has been in linux-next with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iFYEABECABYFAlfyNTEPHGdyZWdAa3JvYWguY29tAAoJEDFH1A3bLfspbuUAoJAn
 XD6k9A+0QgnJ/iLiT8pztawNAKCCVYZOzgdFRGsnaZ2p7lb9IHpPCA==
 =QUj+
 -----END PGP SIGNATURE-----

Merge tag 'usb-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull usb/phy/extcon updates from Greg KH:
 "Here is the big USB, and PHY, and extcon, patchsets for 4.9-rc1.

  Full details are in the shortlog, but generally a lot of new hardware
  support, usb gadget updates, and Wolfram's great cleanup of USB error
  message handling, making the kernel image a tad bit smaller.

  All of this has been in linux-next with no reported issues"

* tag 'usb-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (343 commits)
  Revert "usbtmc: convert to devm_kzalloc"
  USB: serial: cp210x: Add ID for a Juniper console
  usb: Kconfig: using select for USB_COMMON dependency
  bluetooth: bcm203x: don't print error when allocating urb fails
  mmc: host: vub300: don't print error when allocating urb fails
  usb: hub: change CLEAR_FEATURE to SET_FEATURE
  usb: core: Introduce a USB port LED trigger
  USB: bcma: drop Northstar PHY 2.0 initialization code
  usb: core: hcd: add missing header dependencies
  usb: musb: da8xx: fix error handling message in probe
  usb: musb: Fix session based PM for first invalid VBUS
  usb: musb: Fix PM runtime for disconnect after unconfigure
  musb: Export musb_root_disconnect for use in modules
  usb: misc: legousbtower: Fix NULL pointer deference
  cdc-acm: hardening against malicious devices
  Revert "usb: gadget: NCM: Protect dev->port_usb using dev->lock"
  include: extcon: Fix compilation error caused because of incomplete merge
  MAINTAINERS: add tree entry for USB Serial
  phy-twl4030-usb: initialize charging-related stuff via pm_runtime
  phy-twl4030-usb: better handle musb_mailbox() failure
  ...
2016-10-03 20:17:35 -07:00
Linus Torvalds
e6dce825fb TTY/Serial patches for 4.9-rc1
Here is the big TTY and Serial patch set for 4.9-rc1.
 
 It also includes some drivers/dma/ changes, as those were needed by some
 serial drivers, and they were all acked by the DMA maintainer.  Also in
 here is the long-suffering ACPI SPCR patchset, which was passed around
 from maintainer to maintainer like a hot-potato.  Seems I was the
 sucker^Wlucky one.  All of those patches have been acked by the various
 subsystem maintainers as well.
 
 All of this has been in linux-next with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iFYEABECABYFAlfyNjEPHGdyZWdAa3JvYWguY29tAAoJEDFH1A3bLfspwIcAn2uN
 qCD8xQJ0Cs61hD1nUzhNygG8AJ94I4zz/fPGpyh/CtJfLQwtUdLhNA==
 =Rken
 -----END PGP SIGNATURE-----

Merge tag 'tty-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty and serial updates from Greg KH:
 "Here is the big tty and serial patch set for 4.9-rc1.

  It also includes some drivers/dma/ changes, as those were needed by
  some serial drivers, and they were all acked by the DMA maintainer.

  Also in here is the long-suffering ACPI SPCR patchset, which was
  passed around from maintainer to maintainer like a hot-potato. Seems I
  was the sucker^Wlucky one. All of those patches have been acked by the
  various subsystem maintainers as well.

  All of this has been in linux-next with no reported issues"

* tag 'tty-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (111 commits)
  Revert "serial: pl011: add console matching function"
  MAINTAINERS: update entry for atmel_serial driver
  serial: pl011: add console matching function
  ARM64: ACPI: enable ACPI_SPCR_TABLE
  ACPI: parse SPCR and enable matching console
  of/serial: move earlycon early_param handling to serial
  Revert "drivers/tty: Explicitly pass current to show_stack"
  tty: amba-pl011: Don't complain on -EPROBE_DEFER when no irq
  nios2: dts: 10m50: Add tx-threshold parameter
  serial: 8250: Set Altera 16550 TX FIFO Threshold
  serial: 8250: of: Load TX FIFO Threshold from DT
  Documentation: dt: serial: Add TX FIFO threshold parameter
  drivers/tty: Explicitly pass current to show_stack
  serial: imx: Fix DCD reading
  serial: stm32: mark symbols static where possible
  serial: xuartps: Add some register initialisation to cdns_early_console_setup()
  serial: xuartps: Removed unwanted checks while reading the error conditions
  serial: xuartps: Rewrite the interrupt handling logic
  serial: stm32: use mapbase instead of membase for DMA
  tty/serial: atmel: fix fractional baud rate computation
  ...
2016-10-03 20:11:49 -07:00
Linus Torvalds
7af8a0f808 arm64 updates for 4.9:
- Support for execute-only page permissions
 - Support for hibernate and DEBUG_PAGEALLOC
 - Support for heterogeneous systems with mismatches cache line sizes
 - Errata workarounds (A53 843419 update and QorIQ A-008585 timer bug)
 - arm64 PMU perf updates, including cpumasks for heterogeneous systems
 - Set UTS_MACHINE for building rpm packages
 - Yet another head.S tidy-up
 - Some cleanups and refactoring, particularly in the NUMA code
 - Lots of random, non-critical fixes across the board
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABCgAGBQJX7k31AAoJELescNyEwWM0XX0H/iOaWCfKlWOhvBsStGUCsLrK
 XryTzQT2KjdnLKf3jwP+1ateCuBR5ROurYxoDCX5/7mD63c5KiI338Vbv61a1lE1
 AAwjt1stmQVUg/j+kqnuQwB/0DYg+2C8se3D3q5Iyn7zc19cDZJEGcBHNrvLMufc
 XgHrgHgl/rzBDDlHJXleknDFge/MfhU5/Q1vJMRRb4JYrpAtmIokzCO75CYMRcCT
 ND2QbmppKtsyuFPGUTVbAFzJlP6dGKb3eruYta7/ct5d0pJQxav3u98D2yWGfjdM
 YaYq1EmX5Pol7rWumqLtk0+mA9yCFcKLLc+PrJu20Vx0UkvOq8G8Xt70sHNvZU8=
 =gdPM
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Will Deacon:
 "It's a bit all over the place this time with no "killer feature" to
  speak of.  Support for mismatched cache line sizes should help people
  seeing whacky JIT failures on some SoCs, and the big.LITTLE perf
  updates have been a long time coming, but a lot of the changes here
  are cleanups.

  We stray outside arch/arm64 in a few areas: the arch/arm/ arch_timer
  workaround is acked by Russell, the DT/OF bits are acked by Rob, the
  arch_timer clocksource changes acked by Marc, CPU hotplug by tglx and
  jump_label by Peter (all CC'd).

  Summary:

   - Support for execute-only page permissions
   - Support for hibernate and DEBUG_PAGEALLOC
   - Support for heterogeneous systems with mismatches cache line sizes
   - Errata workarounds (A53 843419 update and QorIQ A-008585 timer bug)
   - arm64 PMU perf updates, including cpumasks for heterogeneous systems
   - Set UTS_MACHINE for building rpm packages
   - Yet another head.S tidy-up
   - Some cleanups and refactoring, particularly in the NUMA code
   - Lots of random, non-critical fixes across the board"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (100 commits)
  arm64: tlbflush.h: add __tlbi() macro
  arm64: Kconfig: remove SMP dependence for NUMA
  arm64: Kconfig: select OF/ACPI_NUMA under NUMA config
  arm64: fix dump_backtrace/unwind_frame with NULL tsk
  arm/arm64: arch_timer: Use archdata to indicate vdso suitability
  arm64: arch_timer: Work around QorIQ Erratum A-008585
  arm64: arch_timer: Add device tree binding for A-008585 erratum
  arm64: Correctly bounds check virt_addr_valid
  arm64: migrate exception table users off module.h and onto extable.h
  arm64: pmu: Hoist pmu platform device name
  arm64: pmu: Probe default hw/cache counters
  arm64: pmu: add fallback probe table
  MAINTAINERS: Update ARM PMU PROFILING AND DEBUGGING entry
  arm64: Improve kprobes test for atomic sequence
  arm64/kvm: use alternative auto-nop
  arm64: use alternative auto-nop
  arm64: alternative: add auto-nop infrastructure
  arm64: lse: convert lse alternatives NOP padding to use __nops
  arm64: barriers: introduce nops and __nops macros for NOP sequences
  arm64: sysreg: replace open-coded mrs_s/msr_s with {read,write}_sysreg_s
  ...
2016-10-03 08:58:35 -07:00
Scott Telford
c41251b175 serial: xuartps: Add some register initialisation to cdns_early_console_setup()
Add initialisation of control register and baud rate to
cdns_early_console_setup(), required when running kernel standalone
without a boot loader. Baud rate is only initialised when specified in
earlycon command-line option, otherwise it is assumed this has been
set by a boot loader. Updated Documentation/kernel-parameters.txt
accordingly.

Signed-off-by: Scott Telford <stelford@cadence.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27 12:54:41 +02:00
Bamvor Jian Zhang
0f98dd1b27 gpio/mockup: add virtual gpio device
This patch add basic structure of a virtual gpio device(gpio-mockup)
for testing gpio subsystem. The tester could manipulate such device
through userspace(sysfs or char device) and check the result from
debugfs.

Currently, it support one or more gpiochip(determined by module
parameters with base,ngpio pair). One could test the overlap of
different gpiochip and test the direction and/or output values of
these chips.

Signed-off-by: Kamlakant Patel <kamlakant.patel@broadcom.com>
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-26 11:47:14 -07:00
Scott Wood
f6dc1576cd arm64: arch_timer: Work around QorIQ Erratum A-008585
Erratum A-008585 says that the ARM generic timer counter "has the
potential to contain an erroneous value for a small number of core
clock cycles every time the timer value changes".  Accesses to TVAL
(both read and write) are also affected due to the implicit counter
read.  Accesses to CVAL are not affected.

The workaround is to reread TVAL and count registers until successive
reads return the same value.  Writes to TVAL are replaced with an
equivalent write to CVAL.

The workaround is to reread TVAL and count registers until successive reads
return the same value, and when writing TVAL to retry until counter
reads before and after the write return the same value.

The workaround is enabled if the fsl,erratum-a008585 property is found in
the timer node in the device tree.  This can be overridden with the
clocksource.arm_arch_timer.fsl-a008585 boot parameter, which allows KVM
users to enable the workaround until a mechanism is implemented to
automatically communicate this information.

This erratum can be found on LS1043A and LS2080A.

Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Scott Wood <oss@buserror.net>
[will: renamed read macro to reflect that it's not usually unstable]
Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-23 17:19:25 +01:00
Oliver Neukum
050bc4e846 scsi: introduce a quirk for false cache reporting
Some SATA to USB bridges fail to cooperate with some
drives resulting in no cache being present being reported
to the host. That causes the host to skip sending
a command to synchronize caches. That causes data loss
when the drive is powered down.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-13 08:08:24 +02:00
Dave Hansen
acd547b298 x86/pkeys: Default to a restrictive init PKRU
PKRU is the register that lets you disallow writes or all access to a given
protection key.

The XSAVE hardware defines an "init state" of 0 for PKRU: its most
permissive state, allowing access/writes to everything.  Since we start off
all new processes with the init state, we start all processes off with the
most permissive possible PKRU.

This is unfortunate.  If a thread is clone()'d [1] before a program has
time to set PKRU to a restrictive value, that thread will be able to write
to all data, no matter what pkey is set on it.  This weakens any integrity
guarantees that we want pkeys to provide.

To fix this, we define a very restrictive PKRU to override the
XSAVE-provided value when we create a new FPU context.  We choose a value
that only allows access to pkey 0, which is as restrictive as we can
practically make it.

This does not cause any practical problems with applications using
protection keys because we require them to specify initial permissions for
each key when it is allocated, which override the restrictive default.

In the end, this ensures that threads which do not know how to manage their
own pkey rights can not do damage to data which is pkey-protected.

I would have thought this was a pretty contrived scenario, except that I
heard a bug report from an MPX user who was creating threads in some very
early code before main().  It may be crazy, but folks evidently _do_ it.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: linux-arch@vger.kernel.org
Cc: Dave Hansen <dave@sr71.net>
Cc: mgorman@techsingularity.net
Cc: arnd@arndb.de
Cc: linux-api@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: luto@kernel.org
Cc: akpm@linux-foundation.org
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/20160729163021.F3C25D4A@viggo.jf.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-09 13:02:28 +02:00
Finn Thain
2836a2f5bd documentation/scsi: Remove nodisconnect parameter
The driver that used the 'nodisconnect' parameter was removed in
commit 565bae6a4a ("[SCSI] 53c7xx: kill driver"). Related documentation
was cleaned up in commit f37a7238d3 ("[SCSI] 53c7xx: fix removal
fallout"), except for the remaining two mentions that are removed here.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-09-06 06:38:58 -06:00
Suravee Suthikulpanit
3928aa3f57 iommu/amd: Detect and enable guest vAPIC support
This patch introduces a new IOMMU driver parameter, amd_iommu_guest_ir,
which can be used to specify different interrupt remapping mode for
passthrough devices to VM guest:
    * legacy: Legacy interrupt remapping (w/ 32-bit IRTE)
    * vapic : Guest vAPIC interrupt remapping (w/ GA mode 128-bit IRTE)

Note that in vapic mode, it can also supports legacy interrupt remapping
for non-passthrough devices with the 128-bit IRTE.

Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-09-05 12:41:46 +02:00
Baoquan He
7c142bfee6 docs: kernel-parameter: Improve the description of nr_cpus and maxcpus
From the old description people still can't get what's the exact
difference between nr_cpus and maxcpus. Especially in kdump kernel
nr_cpus is always suggested if it's implemented in the ARCH. The
reason is nr_cpus is used to limit the max number of possible cpu
in system, the sum of already plugged cpus and hot plug cpus can't
exceed its value. However maxcpus is used to limit how many cpus
are allowed to be brought up during bootup.

Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-25 13:14:53 -06:00
baolex.ni
22c6bbe41e Update the maximum depth of C-state from 6 to 9
Hi Jon,

This patch is an old one, we have corrected some minor issues on the newer one.
Please only review the newest version from my last mail with this subject
"[PATCH] ACPI: Update the maximum depth of C-state from 6 to 9".
And I also attached it to this mail.

Thanks,
Baole

On 7/11/2016 6:37 AM, Jonathan Corbet wrote:
> On Mon, 4 Jul 2016 09:55:10 +0800
> "baolex.ni" <baolex.ni@intel.com> wrote:
>
>> Currently, CPUIDLE_STATE_MAX has been defined as 10 in the cpuidle head file,
>> and max_cstate = CPUIDLE_STATE_MAX – 1, so 9 is the right maximum depth of C-state.
>> This change is reflected in one place of the kernel-param file,
>> but not in the other place where I suggest changing.
>>
>> Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
>> Signed-off-by: Baole Ni <baolex.ni@intel.com>
>
> So why are there two signoffs on a single-line patch?  Which one of you
> is the actual author?
>
> Thanks,
>
> jon
>

From cf5f8aa6885874f6490b11507d3c0c86fa0a11f4 Mon Sep 17 00:00:00 2001
From: Chuansheng Liu <chuansheng.liu@intel.com>
Date: Mon, 4 Jul 2016 08:52:51 +0800
Subject: [PATCH] Update the maximum depth of C-state from 6 to 9
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Currently, CPUIDLE_STATE_MAX has been defined as 10 in the cpuidle head file,
and max_cstate = CPUIDLE_STATE_MAX – 1, so 9 is the right maximum depth of C-state.
This change is reflected in one place of the kernel-param file,
but not in the other place where I suggest changing.

Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
Signed-off-by: Baole Ni <baolex.ni@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-18 15:21:56 -06:00
Mathias Koehrer
8b078c6032 PCI: Update "pci=resource_alignment" documentation
Some uio based PCI drivers, e.g., uio_cif, do not work if the assigned PCI
memory resources are not page aligned.  By using the kernel option
"pci=resource_alignment=<align>@<bus>:<slot>.<func>" it is possible to
request page alignment for memory resources of devices.

However, this is cumbersome when using several devices, and the
bus/slot/func addresses may change if devices are added to or removed from
the system.

Extend the "pci=resource_alignment" option so we can specify the relevant
devices via PCI vendor, device, subvendor, and subdevice IDs.  The
specification of the devices via IDs is indicated by a leading string
"pci:" as argument to "pci=resource_alignment".

The format of the specification is
  pci:<vendor>:<device>[:<subvendor>:<subdevice>]

Examples:
  pci=resource_alignment=4096@pci:8086:9c22:103c:198f
  pci=resource_alignment=pci:8086:9c22       # defaults to PAGE_SIZE align

[bhelgaas: changelog, use actual vendor/device IDs in examples]
Signed-off-by: Mathias Koehrer <mathias.koehrer@etas.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-08-09 11:59:15 -05:00
Linus Torvalds
52ddb7e9dd Three fixes for the docs build, including removing an annoying warning on
"make help" if sphinx isn't present.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXo8sIAAoJEI3ONVYwIuV6po0P/0ZZo+YF0GrPvOHr7uuUqAND
 0+4WRfSsT74z5Rn/W3apeX6CM7IGBMSR2zM89E2nWmbE2Uo7bIbrwj6C+Y6gMMfd
 aws0Xi9899Jr6hVkeFVZ9foze+M2yc3tE1vFBby035uW3Zwyz2XHzaU/9vyLOLkJ
 c7jhqCWebqFEqOSWtw2FZYegt2oHSjUsQgGCh3kk2pCU+DzLHntwbblJLeMuTy+h
 zPVxTTBcBkUZcIjpkSvhqc/oCLCiWKLElmwxPBwfpNU9UlE0rol2Lx1eLClxadFl
 QVlb1UAIjPcLnHQoM8dL9NR0tkfGopIDuNCL26GU5ie9N4zurOj5a6hj+G5mZKLB
 tsMqIw+N7ig5FnaQhaCx3oN/VMZ0djxURu9XvKsHBmOCd2Bp8SDoqpCkTwCqCxcN
 DVdUjpS1WUT9w2A1jhH32mx+23eRwJa5oaTFpM3Y0z7Bl9N40ScY2WJcgBKWqHgx
 LRROJAzNOPojbBkwTDNsRValwgtutCcqaRw5mNQTp3YjjmltmqylCvJH3AST+z5r
 CmMDO96O3rUGsCZYoBhxafC2FUUh5RkUwQq/Cy8nrioMookE3Yd5A9DN6wWQ2pTt
 tev/z6s3ov8dygeF6u3noOHCa8GPUpSHO62FyHUKYnn6Tl8xh3x7rmUkUqrJZi5a
 dnXOZzp34eVhev5xDeDN
 =iD7L
 -----END PGP SIGNATURE-----

Merge tag 'doc-4.8-fixes' of git://git.lwn.net/linux

Pull documentation fixes from Jonathan Corbet:
 "Three fixes for the docs build, including removing an annoying warning
  on 'make help' if sphinx isn't present"

* tag 'doc-4.8-fixes' of git://git.lwn.net/linux:
  DocBook: use DOCBOOKS="" to ignore DocBooks instead of IGNORE_DOCBOOKS=1
  Documenation: update cgroup's document path
  Documentation/sphinx: do not warn about missing tools in 'make help'
2016-08-07 10:23:17 -04:00
Linus Torvalds
a71e36045e Highlights:
Trond made a change to the server's tcp logic that allows a fast
 	client to better take advantage of high bandwidth networks, but
 	may increase the risk that a single client could starve other
 	clients; a new sunrpc.svc_rpc_per_connection_limit parameter
 	should help mitigate this in the (hopefully unlikely) event this
 	becomes a problem in practice.
 
 	Tom Haynes added a minimal flex-layout pnfs server, which is of
 	no use in production for now--don't build it unless you're doing
 	client testing or further server development.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXo7HNAAoJECebzXlCjuG+zqUP/RxO5jZjBhNI8/ayGdDW/Jnq
 s0Fu6B+aNRV3GnugmIeI4tWNGnPyERNzFtjLKlnwaasz/oW4qBLqGbNUWC5xKARS
 erODs0hM/1aCYWwNBEc5qXP2u23HrWVuQ+B5fg42ACyliKFGq5faDRmf6XGU/1kB
 8unXGWPAiLiNZD/bWP91fYhThlLgpfHBFZ7M3G2IqmzWZTSELPzwp1bpRWt7yWQQ
 z1oYtXToycbwz3yPVk3cXtaoqpjDUVZf2Guqgqi1BwEyEtYOSaYo1VHNsKDf4OId
 QXQh64AqIK4uszpvtNhvsEaAECN7IiB+N4n2laFiQVmAf8Hfl3AnV/gKeD4lKmTj
 TY6knnjZO/X88wn80MB7JR1H1WXvvzNIHwNR95qfub/lVKX+C+0AORRtYhi5F9ec
 ixNs/z1ImLpYxAjiP/T5anD5xcX2S+LcSv7kRjhEufqNFtRAIqBZO9ZWbCdXAAyE
 tcH9Cru4jeIlFO/y6O61EVrn9FFj2+0uu+7urefNRQ2Y9pmKeculJrLF6WO8WHms
 4IzXMmjZK+358RVdX2Ji5Hw6rBDvfgP+LjB8Jn8CeIiNRONEjT+2/AYQcfk61aLb
 INUbk6G6Vfd8iMO4aaRI9tmW+vKCOZa0IbnrNE1oHKp/AKBDr25i5YPSCsnl3r4Q
 iR7rRe9FIkfqBpbfjVFv
 =mo54
 -----END PGP SIGNATURE-----

Merge tag 'nfsd-4.8' of git://linux-nfs.org/~bfields/linux

Pull nfsd updates from Bruce Fields:
 "Highlights:

   - Trond made a change to the server's tcp logic that allows a fast
     client to better take advantage of high bandwidth networks, but may
     increase the risk that a single client could starve other clients;
     a new sunrpc.svc_rpc_per_connection_limit parameter should help
     mitigate this in the (hopefully unlikely) event this becomes a
     problem in practice.

   - Tom Haynes added a minimal flex-layout pnfs server, which is of no
     use in production for now--don't build it unless you're doing
     client testing or further server development"

* tag 'nfsd-4.8' of git://linux-nfs.org/~bfields/linux: (32 commits)
  nfsd: remove some dead code in nfsd_create_locked()
  nfsd: drop unnecessary MAY_EXEC check from create
  nfsd: clean up bad-type check in nfsd_create_locked
  nfsd: remove unnecessary positive-dentry check
  nfsd: reorganize nfsd_create
  nfsd: check d_can_lookup in fh_verify of directories
  nfsd: remove redundant zero-length check from create
  nfsd: Make creates return EEXIST instead of EACCES
  SUNRPC: Detect immediate closure of accepted sockets
  SUNRPC: accept() may return sockets that are still in SYN_RECV
  nfsd: allow nfsd to advertise multiple layout types
  nfsd: Close race between nfsd4_release_lockowner and nfsd4_lock
  nfsd/blocklayout: Make sure calculate signature/designator length aligned
  xfs: abstract block export operations from nfsd layouts
  SUNRPC: Remove unused callback xpo_adjust_wspace()
  SUNRPC: Change TCP socket space reservation
  SUNRPC: Add a server side per-connection limit
  SUNRPC: Micro optimisation for svc_data_ready
  SUNRPC: Call the default socket callbacks instead of open coding
  SUNRPC: lock the socket while detaching it
  ...
2016-08-04 19:59:06 -04:00
Linus Torvalds
fb1b83d3ff Removed the MODULE_SIG_FORCE-means-no-MODULE_FORCE_LOAD patch.
Only interesting thing here is Jessica's patch to add ro_after_init support
 to modules.  The rest are all trivia.
 
 Cheers,
 Rusty.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXopD9AAoJENkgDmzRrbjxDVEP+waK+E3Y+vJHibLwwCYcVqLG
 OAkQoFXGqxYAo0faGtGPZczxDH/GVK754y+qugOeQvCgHJqit7qWmIUs5uRgqUMb
 uKjoUOfCBiVGUsaHfw7RisOP5FXvAk1jkFxBVtywPj6eIonLr9BB4VE813iXnYGG
 RkVFvAmFxMgq2BY+yjp4IDCGNVEFBq9UrXZ8XY+WGhI1pbxVp9SCUVrLckARDSS4
 t5NeVeLCFlNKmw+ElU7zCKaa4Cyloq9lGFBA1ZgchGADRsOrha9VHNRVxR0pHSIG
 100SW+nFhncNWqVQ2YgspVe1so993wGnORPpsb+o3dg7mIn2wkj6WhTfAKv/UQ1W
 7JUFaRi/rMC8h/njLKvbX+gmEU1d4nnTyZ76UFh+VxU6mbVWYqI44DCLpt+mPT13
 JwwqGGCDPnB/28KFmQITYAkdmvAV3u2aZLXJAQPxKVF7/IzklxHHz2ifMEwtPzOh
 UvuWhjmmPAqncKWXzflxMj8i4C3sPyAs0RDSrMXG7jZJlhguVea+b8bXNhEafR+n
 GM0btAfGw+VWluyNMlOpigSpJt/n6/hQtzlgBQGn7CeknNwamBe5MLGSN3N9MgL9
 WXma9sKn34IqjxtSSP5rJlwTRWHELUZIsKmOnWP4/3gwf1+Fe65ML2cCwp6saeMX
 ZjEosYxdKo32LiZhRDPR
 =URwe
 -----END PGP SIGNATURE-----

Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull module updates from Rusty Russell:
 "The only interesting thing here is Jessica's patch to add
  ro_after_init support to modules.  The rest are all trivia"

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  extable.h: add stddef.h so "NULL" definition is not implicit
  modules: add ro_after_init support
  jump_label: disable preemption around __module_text_address().
  exceptions: fork exception table content from module.h into extable.h
  modules: Add kernel parameter to blacklist modules
  module: Do a WARN_ON_ONCE() for assert module mutex not held
  Documentation/module-signing.txt: Note need for version info if reusing a key
  module: Invalidate signatures on force-loaded modules
  module: Issue warnings when tainting kernel
  module: fix redundant test.
  module: fix noreturn attribute for __module_put_and_exit()
2016-08-04 09:14:38 -04:00
Prarit Bhargava
be7de5f91f modules: Add kernel parameter to blacklist modules
Blacklisting a module in linux has long been a problem.  The current
procedure is to use rd.blacklist=module_name, however, that doesn't
cover the case after the initramfs and before a boot prompt (where one
is supposed to use /etc/modprobe.d/blacklist.conf to blacklist
runtime loading). Using rd.shell to get an early prompt is hit-or-miss,
and doesn't cover all situations AFAICT.

This patch adds this functionality of permanently blacklisting a module
by its name via the kernel parameter module_blacklist=module_name.

[v2]: Rusty, use core_param() instead of __setup() which simplifies
things.

[v3]: Rusty, undo wreckage from strsep()

[v4]: Rusty, simpler version of blacklisted()

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2016-08-04 10:16:53 +09:30
seokhoon.yoon
09c3bcce7c Documenation: update cgroup's document path
cgroup's document path is changed to "cgroup-v1". update it.

Signed-off-by: seokhoon.yoon <iamyooon@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-08-03 15:43:58 -06:00
Linus Torvalds
d52bd54db8 Merge branch 'akpm' (patches from Andrew)
Merge yet more updates from Andrew Morton:

 - the rest of ocfs2

 - various hotfixes, mainly MM

 - quite a bit of misc stuff - drivers, fork, exec, signals, etc.

 - printk updates

 - firmware

 - checkpatch

 - nilfs2

 - more kexec stuff than usual

 - rapidio updates

 - w1 things

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (111 commits)
  ipc: delete "nr_ipc_ns"
  kcov: allow more fine-grained coverage instrumentation
  init/Kconfig: add clarification for out-of-tree modules
  config: add android config fragments
  init/Kconfig: ban CONFIG_LOCALVERSION_AUTO with allmodconfig
  relay: add global mode support for buffer-only channels
  init: allow blacklisting of module_init functions
  w1:omap_hdq: fix regression
  w1: add helper macro module_w1_family
  w1: remove need for ida and use PLATFORM_DEVID_AUTO
  rapidio/switches: add driver for IDT gen3 switches
  powerpc/fsl_rio: apply changes for RIO spec rev 3
  rapidio: modify for rev.3 specification changes
  rapidio: change inbound window size type to u64
  rapidio/idt_gen2: fix locking warning
  rapidio: fix error handling in mbox request/release functions
  rapidio/tsi721_dma: advance queue processing from transfer submit call
  rapidio/tsi721: add messaging mbox selector parameter
  rapidio/tsi721: add PCIe MRRS override parameter
  rapidio/tsi721_dma: add channel mask and queue size parameters
  ...
2016-08-02 21:08:07 -04:00
Borislav Petkov
750afe7bab printk: add kernel parameter to control writes to /dev/kmsg
Add a "printk.devkmsg" kernel command line parameter which controls how
userspace writes into /dev/kmsg.  It has three options:

 * ratelimit - ratelimit logging from userspace.
 * on  - unlimited logging from userspace
 * off - logging from userspace gets ignored

The default setting is to ratelimit the messages written to it.

This changes the kernel default setting of "on" to "ratelimit" and we do
that because we want to keep userspace spamming /dev/kmsg to sane
levels.  This is especially moot when a small kernel log buffer wraps
around and messages get lost.  So the ratelimiting setting should be a
sane setting where kernel messages should have a bit higher chance of
survival from all the spamming.

It additionally does not limit logging to /dev/kmsg while the system is
booting if we haven't disabled it on the command line.

Furthermore, we can control the logging from a lower priority sysctl
interface - kernel.printk_devkmsg.

That interface will succeed only if printk.devkmsg *hasn't* been
supplied on the command line.  If it has, then printk.devkmsg is a
one-time setting which remains for the duration of the system lifetime.
This "locking" of the setting is to prevent userspace from changing the
logging on us through sysctl(2).

This patch is based on previous patches from Linus and Steven.

[bp@suse.de: fixes]
  Link: http://lkml.kernel.org/r/20160719072344.GC25563@nazgul.tnic
Link: http://lkml.kernel.org/r/20160716061745.15795-3-bp@alien8.de
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Dave Young <dyoung@redhat.com>
Cc: Franck Bui <fbui@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02 19:35:06 -04:00
Linus Torvalds
c8d0267efd PCI changes for the v4.8 merge window:
Enumeration
     Move ecam.h to linux/include/pci-ecam.h (Jayachandran C)
     Add parent device field to ECAM struct pci_config_window (Jayachandran C)
     Add generic MCFG table handling (Tomasz Nowicki)
     Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC (Tomasz Nowicki)
     Factor DT-specific pci_bus_find_domain_nr() code out (Tomasz Nowicki)
 
   Resource management
     Add devm_request_pci_bus_resources() (Bjorn Helgaas)
     Unify pci_resource_to_user() declarations (Bjorn Helgaas)
     Implement pci_resource_to_user() with pcibios_resource_to_bus() (microblaze, powerpc, sparc) (Bjorn Helgaas)
     Request host bridge window resources (designware, iproc, rcar, xgene, xilinx, xilinx-nwl) (Bjorn Helgaas)
     Make PCI I/O space optional on ARM32 (Bjorn Helgaas)
     Ignore write combining when mapping I/O port space (Bjorn Helgaas)
     Claim bus resources on MIPS PCI_PROBE_ONLY set-ups (Bjorn Helgaas)
     Remove unicore32 pci=firmware command line parameter handling (Bjorn Helgaas)
     Support I/O resources when parsing host bridge resources (Jayachandran C)
     Add helpers to request/release memory and I/O regions (Johannes Thumshirn)
     Use pci_(request|release)_mem_regions (NVMe, lpfc, GenWQE, ethernet/intel, alx) (Johannes Thumshirn)
     Extend pci=resource_alignment to specify device/vendor IDs (Koehrer Mathias (ETAS/ESW5))
     Add generic pci_bus_claim_resources() (Lorenzo Pieralisi)
     Claim bus resources on ARM32 PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi)
     Remove ARM32 and ARM64 arch-specific pcibios_enable_device() (Lorenzo Pieralisi)
     Add pci_unmap_iospace() to unmap I/O resources (Sinan Kaya)
     Remove powerpc __pci_mmap_set_pgprot() (Yinghai Lu)
 
   PCI device hotplug
     Allow additional bus numbers for hotplug bridges (Keith Busch)
     Ignore interrupts during D3cold (Lukas Wunner)
 
   Power management
     Enforce type casting for pci_power_t (Andy Shevchenko)
     Don't clear d3cold_allowed for PCIe ports (Mika Westerberg)
     Put PCIe ports into D3 during suspend (Mika Westerberg)
     Power on bridges before scanning new devices (Mika Westerberg)
     Runtime resume bridge before rescan (Mika Westerberg)
     Add runtime PM support for PCIe ports (Mika Westerberg)
     Remove redundant check of pcie_set_clkpm (Shawn Lin)
 
   Virtualization
     Add function 1 DMA alias quirk for Marvell 88SE9182 (Aaron Sierra)
     Add DMA alias quirk for Adaptec 3805 (Alex Williamson)
     Mark Atheros AR9485 and QCA9882 to avoid bus reset (Chris Blake)
     Add ACS quirk for Solarflare SFC9220 (Edward Cree)
 
   MSI
     Fix PCI_MSI dependencies (Arnd Bergmann)
     Add pci_msix_desc_addr() helper (Christoph Hellwig)
     Switch msix_program_entries() to use pci_msix_desc_addr() (Christoph Hellwig)
     Make the "entries" argument to pci_enable_msix() optional (Christoph Hellwig)
     Provide sensible IRQ vector alloc/free routines (Christoph Hellwig)
     Spread interrupt vectors in pci_alloc_irq_vectors() (Christoph Hellwig)
 
   Error Handling
     Bind DPC to Root Ports as well as Downstream Ports (Keith Busch)
     Remove DPC tristate module option (Keith Busch)
     Convert Downstream Port Containment driver to use devm_* functions (Mika Westerberg)
 
   Generic host bridge driver
     Select IRQ_DOMAIN (Arnd Bergmann)
     Claim bus resources on PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi)
 
   ACPI host bridge driver
     Add ARM64 acpi_pci_bus_find_domain_nr() (Tomasz Nowicki)
     Add ARM64 ACPI support for legacy IRQs parsing and consolidation with DT code (Tomasz Nowicki)
     Implement ARM64 AML accessors for PCI_Config region (Tomasz Nowicki)
     Support ARM64 ACPI-based PCI host controller (Tomasz Nowicki)
 
   Altera host bridge driver
     Check link status before retrain link (Ley Foon Tan)
     Poll for link up status after retraining the link (Ley Foon Tan)
 
   Axis ARTPEC-6 host bridge driver
     Add PCI_MSI_IRQ_DOMAIN dependency (Arnd Bergmann)
     Add DT binding for Axis ARTPEC-6 PCIe controller (Niklas Cassel)
     Add Axis ARTPEC-6 PCIe controller driver (Niklas Cassel)
 
   Intel VMD host bridge driver
     Use lock save/restore in interrupt enable path (Jon Derrick)
     Select device dma ops to override (Keith Busch)
     Initialize list item in IRQ disable (Keith Busch)
     Use x86_vector_domain as parent domain (Keith Busch)
     Separate MSI and MSI-X vector sharing (Keith Busch)
 
   Marvell Aardvark host bridge driver
     Add DT binding for the Aardvark PCIe controller (Thomas Petazzoni)
     Add Aardvark PCI host controller driver (Thomas Petazzoni)
     Add Aardvark PCIe support for Armada 3700 (Thomas Petazzoni)
 
   Microsoft Hyper-V host bridge driver
     Fix interrupt cleanup path (Cathy Avery)
     Don't leak buffer in hv_pci_onchannelcallback() (Vitaly Kuznetsov)
     Handle all pending messages in hv_pci_onchannelcallback() (Vitaly Kuznetsov)
 
   NVIDIA Tegra host bridge driver
     Program PADS_REFCLK_CFG* always, not just on legacy SoCs (Stephen Warren)
     Program PADS_REFCLK_CFG* registers with per-SoC values (Stephen Warren)
     Use lower-case hex consistently for register definitions (Thierry Reding)
     Use generic pci_remap_iospace() rather than ARM32-specific one (Thierry Reding)
     Stop setting pcibios_min_mem (Thierry Reding)
 
   Renesas R-Car host bridge driver
     Drop gen2 dummy I/O port region (Bjorn Helgaas)
 
   TI DRA7xx host bridge driver
     Fix return value in case of error (Christophe JAILLET)
 
   Xilinx AXI host bridge driver
     Fix return value in case of error (Christophe JAILLET)
 
   Miscellaneous
     Make bus_attr_resource_alignment static (Ben Dooks)
     Include <asm/dma.h> for isa_dma_bridge_buggy (Ben Dooks)
     MAINTAINERS: Add file patterns for PCI device tree bindings (Geert Uytterhoeven)
     Make host bridge drivers explicitly non-modular (Paul Gortmaker)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXoNRtAAoJEFmIoMA60/r8LMkP/3kiNh21QFS6RZGOaDft5/Py
 n14Zo0w51avspxoI3iyDlBd5q/SssMqi+2c6Ko/fh2D2xMxJgmQOjdMDrIGARxGA
 qEHk/5IoXquY2/GcptmCk3ap66cJ6kTovS4OPrb73m3fPuknFwFwdzExq22XHbnI
 crPya6xwQxPLc54VpY/TsgW8E+EKZd/3FW9wuzzNHXrXmTILyhBQzQAA0K470GMx
 wEXU6kc3M/XhRuF1zjV9/O+H/xguwfnbTpZLvd2NAF6uXKZoRytEHHtNnVqu1hoe
 UPpDS2xq32pMNbGxGqBetCdIbkY/hWOufmckHI7Yu2OfXBYyHBYMG2je1+nMPkOV
 WiFhhrchGt5KnEMUwXPS4ROqnSZVpZBl1Fd4s10GhUYkoE2HNKJXta398H9FR1jj
 4NEVSi4mSX/+CkaoIN3lXYiaf9P0wv4Wppve4Scr30+VnLjJhm7Vw5La7v12oo6x
 otrJ/g98AkmnbuUdLeWBUS/+TOcdPjZYbw52rqBsbOOjFm51Zcj6D7kf5WcTypQy
 HzbvygSVabcioWehUG1uudC8pdJmQlUGx1aES/iu+mZEae4cuUFALu6hDBD9IYnZ
 5JdwjVzI0UItEwT3rQt3t4xiAqHADQ0NAVNJVCeREdoy/YQpSoTWGXIpyqCZ1yCm
 aBykjRsxbKQXlhVeIxuc
 =NVxu
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "Highlights:

   - ARM64 support for ACPI host bridges

   - new drivers for Axis ARTPEC-6 and Marvell Aardvark

   - new pci_alloc_irq_vectors() interface for MSI-X, MSI, legacy INTx

   - pci_resource_to_user() cleanup (more to come)

  Detailed summary:

  Enumeration:
   - Move ecam.h to linux/include/pci-ecam.h (Jayachandran C)
   - Add parent device field to ECAM struct pci_config_window (Jayachandran C)
   - Add generic MCFG table handling (Tomasz Nowicki)
   - Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC (Tomasz Nowicki)
   - Factor DT-specific pci_bus_find_domain_nr() code out (Tomasz Nowicki)

  Resource management:
   - Add devm_request_pci_bus_resources() (Bjorn Helgaas)
   - Unify pci_resource_to_user() declarations (Bjorn Helgaas)
   - Implement pci_resource_to_user() with pcibios_resource_to_bus() (microblaze, powerpc, sparc) (Bjorn Helgaas)
   - Request host bridge window resources (designware, iproc, rcar, xgene, xilinx, xilinx-nwl) (Bjorn Helgaas)
   - Make PCI I/O space optional on ARM32 (Bjorn Helgaas)
   - Ignore write combining when mapping I/O port space (Bjorn Helgaas)
   - Claim bus resources on MIPS PCI_PROBE_ONLY set-ups (Bjorn Helgaas)
   - Remove unicore32 pci=firmware command line parameter handling (Bjorn Helgaas)
   - Support I/O resources when parsing host bridge resources (Jayachandran C)
   - Add helpers to request/release memory and I/O regions (Johannes Thumshirn)
   - Use pci_(request|release)_mem_regions (NVMe, lpfc, GenWQE, ethernet/intel, alx) (Johannes Thumshirn)
   - Extend pci=resource_alignment to specify device/vendor IDs (Koehrer Mathias (ETAS/ESW5))
   - Add generic pci_bus_claim_resources() (Lorenzo Pieralisi)
   - Claim bus resources on ARM32 PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi)
   - Remove ARM32 and ARM64 arch-specific pcibios_enable_device() (Lorenzo Pieralisi)
   - Add pci_unmap_iospace() to unmap I/O resources (Sinan Kaya)
   - Remove powerpc __pci_mmap_set_pgprot() (Yinghai Lu)

  PCI device hotplug:
   - Allow additional bus numbers for hotplug bridges (Keith Busch)
   - Ignore interrupts during D3cold (Lukas Wunner)

  Power management:
   - Enforce type casting for pci_power_t (Andy Shevchenko)
   - Don't clear d3cold_allowed for PCIe ports (Mika Westerberg)
   - Put PCIe ports into D3 during suspend (Mika Westerberg)
   - Power on bridges before scanning new devices (Mika Westerberg)
   - Runtime resume bridge before rescan (Mika Westerberg)
   - Add runtime PM support for PCIe ports (Mika Westerberg)
   - Remove redundant check of pcie_set_clkpm (Shawn Lin)

  Virtualization:
   - Add function 1 DMA alias quirk for Marvell 88SE9182 (Aaron Sierra)
   - Add DMA alias quirk for Adaptec 3805 (Alex Williamson)
   - Mark Atheros AR9485 and QCA9882 to avoid bus reset (Chris Blake)
   - Add ACS quirk for Solarflare SFC9220 (Edward Cree)

  MSI:
   - Fix PCI_MSI dependencies (Arnd Bergmann)
   - Add pci_msix_desc_addr() helper (Christoph Hellwig)
   - Switch msix_program_entries() to use pci_msix_desc_addr() (Christoph Hellwig)
   - Make the "entries" argument to pci_enable_msix() optional (Christoph Hellwig)
   - Provide sensible IRQ vector alloc/free routines (Christoph Hellwig)
   - Spread interrupt vectors in pci_alloc_irq_vectors() (Christoph Hellwig)

  Error Handling:
   - Bind DPC to Root Ports as well as Downstream Ports (Keith Busch)
   - Remove DPC tristate module option (Keith Busch)
   - Convert Downstream Port Containment driver to use devm_* functions (Mika Westerberg)

  Generic host bridge driver:
   - Select IRQ_DOMAIN (Arnd Bergmann)
   - Claim bus resources on PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi)

  ACPI host bridge driver:
   - Add ARM64 acpi_pci_bus_find_domain_nr() (Tomasz Nowicki)
   - Add ARM64 ACPI support for legacy IRQs parsing and consolidation with DT code (Tomasz Nowicki)
   - Implement ARM64 AML accessors for PCI_Config region (Tomasz Nowicki)
   - Support ARM64 ACPI-based PCI host controller (Tomasz Nowicki)

  Altera host bridge driver:
   - Check link status before retrain link (Ley Foon Tan)
   - Poll for link up status after retraining the link (Ley Foon Tan)

  Axis ARTPEC-6 host bridge driver:
   - Add PCI_MSI_IRQ_DOMAIN dependency (Arnd Bergmann)
   - Add DT binding for Axis ARTPEC-6 PCIe controller (Niklas Cassel)
   - Add Axis ARTPEC-6 PCIe controller driver (Niklas Cassel)

  Intel VMD host bridge driver:
   - Use lock save/restore in interrupt enable path (Jon Derrick)
   - Select device dma ops to override (Keith Busch)
   - Initialize list item in IRQ disable (Keith Busch)
   - Use x86_vector_domain as parent domain (Keith Busch)
   - Separate MSI and MSI-X vector sharing (Keith Busch)

  Marvell Aardvark host bridge driver:
   - Add DT binding for the Aardvark PCIe controller (Thomas Petazzoni)
   - Add Aardvark PCI host controller driver (Thomas Petazzoni)
   - Add Aardvark PCIe support for Armada 3700 (Thomas Petazzoni)

  Microsoft Hyper-V host bridge driver:
   - Fix interrupt cleanup path (Cathy Avery)
   - Don't leak buffer in hv_pci_onchannelcallback() (Vitaly Kuznetsov)
   - Handle all pending messages in hv_pci_onchannelcallback() (Vitaly Kuznetsov)

  NVIDIA Tegra host bridge driver:
   - Program PADS_REFCLK_CFG* always, not just on legacy SoCs (Stephen Warren)
   - Program PADS_REFCLK_CFG* registers with per-SoC values (Stephen Warren)
   - Use lower-case hex consistently for register definitions (Thierry Reding)
   - Use generic pci_remap_iospace() rather than ARM32-specific one (Thierry Reding)
   - Stop setting pcibios_min_mem (Thierry Reding)

  Renesas R-Car host bridge driver:
   - Drop gen2 dummy I/O port region (Bjorn Helgaas)

  TI DRA7xx host bridge driver:
   - Fix return value in case of error (Christophe JAILLET)

  Xilinx AXI host bridge driver:
   - Fix return value in case of error (Christophe JAILLET)

  Miscellaneous:
   - Make bus_attr_resource_alignment static (Ben Dooks)
   - Include <asm/dma.h> for isa_dma_bridge_buggy (Ben Dooks)
   - MAINTAINERS: Add file patterns for PCI device tree bindings (Geert Uytterhoeven)
   - Make host bridge drivers explicitly non-modular (Paul Gortmaker)"

* tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (125 commits)
  PCI: xgene: Make explicitly non-modular
  PCI: thunder-pem: Make explicitly non-modular
  PCI: thunder-ecam: Make explicitly non-modular
  PCI: tegra: Make explicitly non-modular
  PCI: rcar-gen2: Make explicitly non-modular
  PCI: rcar: Make explicitly non-modular
  PCI: mvebu: Make explicitly non-modular
  PCI: layerscape: Make explicitly non-modular
  PCI: keystone: Make explicitly non-modular
  PCI: hisi: Make explicitly non-modular
  PCI: generic: Make explicitly non-modular
  PCI: designware-plat: Make it explicitly non-modular
  PCI: artpec6: Make explicitly non-modular
  PCI: armada8k: Make explicitly non-modular
  PCI: artpec: Add PCI_MSI_IRQ_DOMAIN dependency
  PCI: Add ACS quirk for Solarflare SFC9220
  arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700
  PCI: aardvark: Add Aardvark PCI host controller driver
  dt-bindings: add DT binding for the Aardvark PCIe controller
  PCI: tegra: Program PADS_REFCLK_CFG* registers with per-SoC values
  ...
2016-08-02 17:12:29 -04:00
Bjorn Helgaas
3efc702378 Merge branch 'pci/resource' into next
* pci/resource:
  unicore32/PCI: Remove pci=firmware command line parameter handling
  ARM/PCI: Remove arch-specific pcibios_enable_device()
  ARM64/PCI: Remove arch-specific pcibios_enable_device()
  MIPS/PCI: Claim bus resources on PCI_PROBE_ONLY set-ups
  ARM/PCI: Claim bus resources on PCI_PROBE_ONLY set-ups
  PCI: generic: Claim bus resources on PCI_PROBE_ONLY set-ups
  PCI: Add generic pci_bus_claim_resources()
  alx: Use pci_(request|release)_mem_regions
  ethernet/intel: Use pci_(request|release)_mem_regions
  GenWQE: Use pci_(request|release)_mem_regions
  lpfc: Use pci_(request|release)_mem_regions
  NVMe: Use pci_(request|release)_mem_regions
  PCI: Add helpers to request/release memory and I/O regions
  PCI: Extending pci=resource_alignment to specify device/vendor IDs
  sparc/PCI: Implement pci_resource_to_user() with pcibios_resource_to_bus()
  powerpc/pci: Implement pci_resource_to_user() with pcibios_resource_to_bus()
  microblaze/PCI: Implement pci_resource_to_user() with pcibios_resource_to_bus()
  PCI: Unify pci_resource_to_user() declarations
  microblaze/PCI: Remove useless __pci_mmap_set_pgprot()
  powerpc/pci: Remove __pci_mmap_set_pgprot()
  PCI: Ignore write combining when mapping I/O port space
2016-08-01 12:23:44 -05:00
Bjorn Helgaas
a00c74c166 Merge branches 'pci/aspm', 'pci/dpc', 'pci/hotplug', 'pci/misc', 'pci/msi', 'pci/pm' and 'pci/virtualization' into next
* pci/aspm:
  PCI/ASPM: Remove redundant check of pcie_set_clkpm

* pci/dpc:
  PCI: Remove DPC tristate module option
  PCI: Bind DPC to Root Ports as well as Downstream Ports
  PCI: Fix whitespace in struct dpc_dev
  PCI: Convert Downstream Port Containment driver to use devm_* functions

* pci/hotplug:
  PCI: Allow additional bus numbers for hotplug bridges

* pci/misc:
  PCI: Include <asm/dma.h> for isa_dma_bridge_buggy
  PCI: Make bus_attr_resource_alignment static
  MAINTAINERS: Add file patterns for PCI device tree bindings
  PCI: Fix comment typo

* pci/msi:
  PCI/MSI: irqchip: Fix PCI_MSI dependencies

* pci/pm:
  PCI: pciehp: Ignore interrupts during D3cold
  PCI: Document connection between pci_power_t and hardware PM capability
  PCI: Add runtime PM support for PCIe ports
  ACPI / hotplug / PCI: Runtime resume bridge before rescan
  PCI: Power on bridges before scanning new devices
  PCI: Put PCIe ports into D3 during suspend
  PCI: Don't clear d3cold_allowed for PCIe ports
  PCI / PM: Enforce type casting for pci_power_t

* pci/virtualization:
  PCI: Add ACS quirk for Solarflare SFC9220
  PCI: Add DMA alias quirk for Adaptec 3805
  PCI: Mark Atheros AR9485 and QCA9882 to avoid bus reset
  PCI: Add function 1 DMA alias quirk for Marvell 88SE9182
2016-08-01 12:23:31 -05:00
Linus Torvalds
bad60e6f25 powerpc updates for 4.8 # 1
Highlights:
  - PowerNV PCI hotplug support.
  - Lots more Power9 support.
  - eBPF JIT support on ppc64le.
  - Lots of cxl updates.
  - Boot code consolidation.
 
 Bug fixes:
  - Fix spin_unlock_wait() from Boqun Feng
  - Fix stack pointer corruption in __tm_recheckpoint() from Michael Neuling
  - Fix multiple bugs in memory_hotplug_max() from Bharata B Rao
  - mm: Ensure "special" zones are empty from Oliver O'Halloran
  - ftrace: Separate the heuristics for checking call sites from Michael Ellerman
  - modules: Never restore r2 for a mprofile-kernel style mcount() call from Michael Ellerman
  - Fix endianness when reading TCEs from Alexey Kardashevskiy
  - start rtasd before PCI probing from Greg Kurz
  - PCI: rpaphp: Fix slot registration for multiple slots under a PHB from Tyrel Datwyler
  - powerpc/mm: Add memory barrier in __hugepte_alloc() from Sukadev Bhattiprolu
 
 Cleanups & fixes:
  - Drop support for MPIC in pseries from Rashmica Gupta
  - Define and use PPC64_ELF_ABI_v2/v1 from Michael Ellerman
  - Remove unused symbols in asm-offsets.c from Rashmica Gupta
  - Fix SRIOV not building without EEH enabled from Russell Currey
  - Remove kretprobe_trampoline_holder. from Thiago Jung Bauermann
  - Reduce log level of PCI I/O space warning from Benjamin Herrenschmidt
  - Add array bounds checking to crash_shutdown_handlers from Suraj Jitindar Singh
  - Avoid -maltivec when using clang integrated assembler from Anton Blanchard
  - Fix array overrun in ppc_rtas() syscall from Andrew Donnellan
  - Fix error return value in cmm_mem_going_offline() from Rasmus Villemoes
  - export cpu_to_core_id() from Mauricio Faria de Oliveira
  - Remove old symbols from defconfigs from Andrew Donnellan
  - Update obsolete comments in setup_32.c about entry conditions from Benjamin Herrenschmidt
  - Add comment explaining the purpose of setup_kdump_trampoline() from Benjamin Herrenschmidt
  - Merge the RELOCATABLE config entries for ppc32 and ppc64 from Kevin Hao
  - Remove RELOCATABLE_PPC32 from Kevin Hao
  - Fix .long's in tlb-radix.c to more meaningful from Balbir Singh
 
 Minor cleanups & fixes:
  - Andrew Donnellan, Anna-Maria Gleixner, Anton Blanchard, Benjamin
    Herrenschmidt, Bharata B Rao, Christophe Leroy, Colin Ian King, Geliang
    Tang, Greg Kurz, Madhavan Srinivasan, Michael Ellerman, Michael Ellerman,
    Stephen Rothwell, Stewart Smith.
 
 Freescale updates from Scott:
  - "Highlights include more 8xx optimizations, device tree updates,
    and MVME7100 support."
 
 PowerNV PCI hotplug from Gavin Shan:
  - PCI: Add pcibios_setup_bridge()
  - Override pcibios_setup_bridge()
  - Remove PCI_RESET_DELAY_US
  - Move pnv_pci_ioda_setup_opal_tce_kill() around
  - Increase PE# capacity
  - Allocate PE# in reverse order
  - Create PEs in pcibios_setup_bridge()
  - Setup PE for root bus
  - Extend PCI bridge resources
  - Make pnv_ioda_deconfigure_pe() visible
  - Dynamically release PE
  - Update bridge windows on PCI plug
  - Delay populating pdn
  - Support PCI slot ID
  - Use PCI slot reset infrastructure
  - Introduce pnv_pci_get_slot_id()
  - Functions to get/set PCI slot state
  - PCI/hotplug: PowerPC PowerNV PCI hotplug driver
  - Print correct PHB type names
 
 Power9 idle support from Shreyas B. Prabhu:
  - set power_save func after the idle states are initialized
  - Use PNV_THREAD_WINKLE macro while requesting for winkle
  - make hypervisor state restore a function
  - Rename idle_power7.S to idle_book3s.S
  - Rename reusable idle functions to hardware agnostic names
  - Make pnv_powersave_common more generic
  - abstraction for saving SPRs before entering deep idle states
  - Add platform support for stop instruction
  - cpuidle/powernv: Use CPUIDLE_STATE_MAX instead of MAX_POWERNV_IDLE_STATES
  - cpuidle/powernv: cleanup cpuidle-powernv.c
  - cpuidle/powernv: Add support for POWER ISA v3 idle states
  - Use deepest stop state when cpu is offlined
 
 Power9 PMU from Madhavan Srinivasan:
  - factor out power8 pmu macros and defines
  - factor out power8 pmu functions
  - factor out power8 __init_pmu code
  - Add power9 event list macros for generic and cache events
  - Power9 PMU support
  - Export Power9 generic and cache events to sysfs
 
 Power9 preliminary interrupt & PCI support from Benjamin Herrenschmidt:
  - Add XICS emulation APIs
  - Move a few exception common handlers to make room
  - Add support for HV virtualization interrupts
  - Add mechanism to force a replay of interrupts
  - Add ICP OPAL backend
  - Discover IODA3 PHBs
  - pci: Remove obsolete SW invalidate
  - opal: Add real mode call wrappers
  - Rename TCE invalidation calls
  - Remove SWINV constants and obsolete TCE code
  - Rework accessing the TCE invalidate register
  - Fallback to OPAL for TCE invalidations
  - Use the device-tree to get available range of M64's
  - Check status of a PHB before using it
  - pci: Don't try to allocate resources that will be reassigned
 
 Other Power9:
  - Send SIGBUS on unaligned copy and paste from Chris Smart
  - Large Decrementer support from Oliver O'Halloran
  - Load Monitor Register Support from Jack Miller
 
 Performance improvements from Anton Blanchard:
  - Avoid load hit store in __giveup_fpu() and __giveup_altivec()
  - Avoid load hit store in setup_sigcontext()
  - Remove assembly versions of strcpy, strcat, strlen and strcmp
  - Align hot loops of some string functions
 
 eBPF JIT from Naveen N. Rao:
  - Fix/enhance 32-bit Load Immediate implementation
  - Optimize 64-bit Immediate loads
  - Introduce rotate immediate instructions
  - A few cleanups
  - Isolate classic BPF JIT specifics into a separate header
  - Implement JIT compiler for extended BPF
 
 Operator Panel driver from Suraj Jitindar Singh:
  - devicetree/bindings: Add binding for operator panel on FSP machines
  - Add inline function to get rc from an ASYNC_COMP opal_msg
  - Add driver for operator panel on FSP machines
 
 Sparse fixes from Daniel Axtens:
  - make some things static
  - Introduce asm-prototypes.h
  - Include headers containing prototypes
  - Use #ifdef __BIG_ENDIAN__ #else for REG_BYTE
  - kvm: Clarify __user annotations
  - Pass endianness to sparse
  - Make ppc_md.{halt, restart} __noreturn
 
 MM fixes & cleanups from Aneesh Kumar K.V:
  - radix: Update LPCR HR bit as per ISA
  - use _raw variant of page table accessors
  - Compile out radix related functions if RADIX_MMU is disabled
  - Clear top 16 bits of va only on older cpus
  - Print formation regarding the the MMU mode
  - hash: Update SDR1 size encoding as documented in ISA 3.0
  - radix: Update PID switch sequence
  - radix: Update machine call back to support new HCALL.
  - radix: Add LPID based tlb flush helpers
  - radix: Add a kernel command line to disable radix
  - Cleanup LPCR defines
 
 Boot code consolidation from Benjamin Herrenschmidt:
  - Move epapr_paravirt_early_init() to early_init_devtree()
  - cell: Don't use flat device-tree after boot
  - ge_imp3a: Don't use the flat device-tree after boot
  - mpc85xx_ds: Don't use the flat device-tree after boot
  - mpc85xx_rdb: Don't use the flat device-tree after boot
  - Don't test for machine type in rtas_initialize()
  - Don't test for machine type in smp_setup_cpu_maps()
  - dt: Add of_device_compatible_match()
  - Factor do_feature_fixup calls
  - Move 64-bit feature fixup earlier
  - Move 64-bit memory reserves to setup_arch()
  - Use a cachable DART
  - Move FW feature probing out of pseries probe()
  - Put exception configuration in a common place
  - Remove early allocation of the SMU command buffer
  - Move MMU backend selection out of platform code
  - pasemi: Remove IOBMAP allocation from platform probe()
  - mm/hash: Don't use machine_is() early during boot
  - Don't test for machine type to detect HEA special case
  - pmac: Remove spurrious machine type test
  - Move hash table ops to a separate structure
  - Ensure that ppc_md is empty before probing for machine type
  - Move 64-bit probe_machine() to later in the boot process
  - Move 32-bit probe() machine to later in the boot process
  - Get rid of ppc_md.init_early()
  - Move the boot time info banner to a separate function
  - Move setting of {i,d}cache_bsize to initialize_cache_info()
  - Move the content of setup_system() to setup_arch()
  - Move cache info inits to a separate function
  - Re-order the call to smp_setup_cpu_maps()
  - Re-order setup_panic()
  - Make a few boot functions __init
  - Merge 32-bit and 64-bit setup_arch()
 
 Other new features:
  - tty/hvc: Use IRQF_SHARED for OPAL hvc consoles from Sam Mendoza-Jonas
  - tty/hvc: Use opal irqchip interface if available from Sam Mendoza-Jonas
  - powerpc: Add module autoloading based on CPU features from Alastair D'Silva
  - crypto: vmx - Convert to CPU feature based module autoloading from Alastair D'Silva
  - Wake up kopald polling thread before waiting for events from Benjamin Herrenschmidt
  - xmon: Dump ISA 2.06 SPRs from Michael Ellerman
  - xmon: Dump ISA 2.07 SPRs from Michael Ellerman
  - Add a parameter to disable 1TB segs from Oliver O'Halloran
  - powerpc/boot: Add OPAL console to epapr wrappers from Oliver O'Halloran
  - Assign fixed PHB number based on device-tree properties from Guilherme G. Piccoli
  - pseries: Add pseries hotplug workqueue from John Allen
  - pseries: Add support for hotplug interrupt source from John Allen
  - pseries: Use kernel hotplug queue for PowerVM hotplug events from John Allen
  - pseries: Move property cloning into its own routine from Nathan Fontenot
  - pseries: Dynamic add entires to associativity lookup array from Nathan Fontenot
  - pseries: Auto-online hotplugged memory from Nathan Fontenot
  - pseries: Remove call to memblock_add() from Nathan Fontenot
 
 cxl:
  - Add set and get private data to context struct from Michael Neuling
  - make base more explicitly non-modular from Paul Gortmaker
  - Use for_each_compatible_node() macro from Wei Yongjun
  - Frederic Barrat
    - Abstract the differences between the PSL and XSL
    - Make vPHB device node match adapter's
  - Philippe Bergheaud
    - Add mechanism for delivering AFU driver specific events
    - Ignore CAPI adapters misplaced in switched slots
    - Refine slice error debug messages
  - Andrew Donnellan
    - static-ify variables to fix sparse warnings
    - PCI/hotplug: pnv_php: export symbols and move struct types needed by cxl
    - PCI/hotplug: pnv_php: handle OPAL_PCI_SLOT_OFFLINE power state
    - Add cxl_check_and_switch_mode() API to switch bi-modal cards
    - remove dead Kconfig options
    - fix potential NULL dereference in free_adapter()
  - Ian Munsie
    - Update process element after allocating interrupts
    - Add support for CAPP DMA mode
    - Fix allowing bogus AFU descriptors with 0 maximum processes
    - Fix allocating a minimum of 2 pages for the SPA
    - Fix bug where AFU disable operation had no effect
    - Workaround XSL bug that does not clear the RA bit after a reset
    - Fix NULL pointer dereference on kernel contexts with no AFU interrupts
    - powerpc/powernv: Split cxl code out into a separate file
    - Add cxl_slot_is_supported API
    - Enable bus mastering for devices using CAPP DMA mode
    - Move cxl_afu_get / cxl_afu_put to base
    - Allow a default context to be associated with an external pci_dev
    - Do not create vPHB if there are no AFU configuration records
    - powerpc/powernv: Add support for the cxl kernel api on the real phb
    - Add support for using the kernel API with a real PHB
    - Add kernel APIs to get & set the max irqs per context
    - Add preliminary workaround for CX4 interrupt limitation
    - Add support for interrupts on the Mellanox CX4
    - Workaround PE=0 hardware limitation in Mellanox CX4
    - powerpc/powernv: Fix pci-cxl.c build when CONFIG_MODULES=n
 
 selftests:
  - Test unaligned copy and paste from Chris Smart
  - Load Monitor Register Tests from Jack Miller
  - Cyril Bur
    - exec() with suspended transaction
    - Use signed long to read perf_event_paranoid
    - Fix usage message in context_switch
    - Fix generation of vector instructions/types in context_switch
  - Michael Ellerman
    - Use "Delta" rather than "Error" in normal output
    - Import Anton's mmap & futex micro benchmarks
    - Add a test for PROT_SAO
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXnWchAAoJEFHr6jzI4aWAe64P/36Vd9yJLptjkoyZp8/IQtu1
 Cv8buQwGdKuSMzdkcUAOXcC3fe2u70ZWXMKKLfY3koIV1IAiqdWk5/XWRKMP2XmE
 dG0LhSf0uu7uh+mE0WvQnRu46ImeKtQ+mPp4Hbs/s9SxMSeYjruv3vdWWmgUq0cl
 Gac2qJSRtAMmgLuHWMjf7N5mxOTOnKejU4o2i9cJ+YHmWKOdCigv2Ge1UadOQFlC
 E7tRPiUR3asfDfj+e+LVTTdToH6p8pk+mOUzIoZ8jIkQ+IXzi62UDl5+Rw9mqiuX
 1CtqEMUXxo2qwX+d4TcV/QUOp0YKPuIcUZ9NMMS+S3lOyJ4NFt+j2Izk7QJp5kNP
 gKVqB68TjDQsBuDr3P9ynlHbduxTIhZAqopbTrLe0FIg48nUe4n1yHJBVzqaVajX
 rFBJSsSUffBLAARNPSXJJhIgc2C1/qOC8dgMeDMcR2kPirDHaQZ/lY1yEpq1yiqR
 q6e3v5hvIAm4IjbYk0mF7TUxBrPGVE/ExyBINyASRoYxAJ1PyeD/iljZ9vI3asRA
 s+hhxT8H3f7lnqTrmJqMjHgAdGkmag07EdmvFNX4xK4aADSy7Y6g4dw25ffRopo9
 p9Jf9HX+dZv65Y3UjbV/6HuXcaSEBJJLSVWvii65PebqSN0LuHEFvNeIJ6Iblx0B
 AWh/hd0Iin2gdkcG39Mr
 =Z5kM
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Highlights:
   - PowerNV PCI hotplug support.
   - Lots more Power9 support.
   - eBPF JIT support on ppc64le.
   - Lots of cxl updates.
   - Boot code consolidation.

  Bug fixes:
   - Fix spin_unlock_wait() from Boqun Feng
   - Fix stack pointer corruption in __tm_recheckpoint() from Michael
     Neuling
   - Fix multiple bugs in memory_hotplug_max() from Bharata B Rao
   - mm: Ensure "special" zones are empty from Oliver O'Halloran
   - ftrace: Separate the heuristics for checking call sites from
     Michael Ellerman
   - modules: Never restore r2 for a mprofile-kernel style mcount() call
     from Michael Ellerman
   - Fix endianness when reading TCEs from Alexey Kardashevskiy
   - start rtasd before PCI probing from Greg Kurz
   - PCI: rpaphp: Fix slot registration for multiple slots under a PHB
     from Tyrel Datwyler
   - powerpc/mm: Add memory barrier in __hugepte_alloc() from Sukadev
     Bhattiprolu

  Cleanups & fixes:
   - Drop support for MPIC in pseries from Rashmica Gupta
   - Define and use PPC64_ELF_ABI_v2/v1 from Michael Ellerman
   - Remove unused symbols in asm-offsets.c from Rashmica Gupta
   - Fix SRIOV not building without EEH enabled from Russell Currey
   - Remove kretprobe_trampoline_holder from Thiago Jung Bauermann
   - Reduce log level of PCI I/O space warning from Benjamin
     Herrenschmidt
   - Add array bounds checking to crash_shutdown_handlers from Suraj
     Jitindar Singh
   - Avoid -maltivec when using clang integrated assembler from Anton
     Blanchard
   - Fix array overrun in ppc_rtas() syscall from Andrew Donnellan
   - Fix error return value in cmm_mem_going_offline() from Rasmus
     Villemoes
   - export cpu_to_core_id() from Mauricio Faria de Oliveira
   - Remove old symbols from defconfigs from Andrew Donnellan
   - Update obsolete comments in setup_32.c about entry conditions from
     Benjamin Herrenschmidt
   - Add comment explaining the purpose of setup_kdump_trampoline() from
     Benjamin Herrenschmidt
   - Merge the RELOCATABLE config entries for ppc32 and ppc64 from Kevin
     Hao
   - Remove RELOCATABLE_PPC32 from Kevin Hao
   - Fix .long's in tlb-radix.c to more meaningful from Balbir Singh

  Minor cleanups & fixes:
   - Andrew Donnellan, Anna-Maria Gleixner, Anton Blanchard, Benjamin
     Herrenschmidt, Bharata B Rao, Christophe Leroy, Colin Ian King,
     Geliang Tang, Greg Kurz, Madhavan Srinivasan, Michael Ellerman,
     Michael Ellerman, Stephen Rothwell, Stewart Smith.

  Freescale updates from Scott:
   - "Highlights include more 8xx optimizations, device tree updates,
     and MVME7100 support."

  PowerNV PCI hotplug from Gavin Shan:
   - PCI: Add pcibios_setup_bridge()
   - Override pcibios_setup_bridge()
   - Remove PCI_RESET_DELAY_US
   - Move pnv_pci_ioda_setup_opal_tce_kill() around
   - Increase PE# capacity
   - Allocate PE# in reverse order
   - Create PEs in pcibios_setup_bridge()
   - Setup PE for root bus
   - Extend PCI bridge resources
   - Make pnv_ioda_deconfigure_pe() visible
   - Dynamically release PE
   - Update bridge windows on PCI plug
   - Delay populating pdn
   - Support PCI slot ID
   - Use PCI slot reset infrastructure
   - Introduce pnv_pci_get_slot_id()
   - Functions to get/set PCI slot state
   - PCI/hotplug: PowerPC PowerNV PCI hotplug driver
   - Print correct PHB type names

  Power9 idle support from Shreyas B. Prabhu:
   - set power_save func after the idle states are initialized
   - Use PNV_THREAD_WINKLE macro while requesting for winkle
   - make hypervisor state restore a function
   - Rename idle_power7.S to idle_book3s.S
   - Rename reusable idle functions to hardware agnostic names
   - Make pnv_powersave_common more generic
   - abstraction for saving SPRs before entering deep idle states
   - Add platform support for stop instruction
   - cpuidle/powernv: Use CPUIDLE_STATE_MAX instead of MAX_POWERNV_IDLE_STATES
   - cpuidle/powernv: cleanup cpuidle-powernv.c
   - cpuidle/powernv: Add support for POWER ISA v3 idle states
   - Use deepest stop state when cpu is offlined

  Power9 PMU from Madhavan Srinivasan:
   - factor out power8 pmu macros and defines
   - factor out power8 pmu functions
   - factor out power8 __init_pmu code
   - Add power9 event list macros for generic and cache events
   - Power9 PMU support
   - Export Power9 generic and cache events to sysfs

  Power9 preliminary interrupt & PCI support from Benjamin Herrenschmidt:
   - Add XICS emulation APIs
   - Move a few exception common handlers to make room
   - Add support for HV virtualization interrupts
   - Add mechanism to force a replay of interrupts
   - Add ICP OPAL backend
   - Discover IODA3 PHBs
   - pci: Remove obsolete SW invalidate
   - opal: Add real mode call wrappers
   - Rename TCE invalidation calls
   - Remove SWINV constants and obsolete TCE code
   - Rework accessing the TCE invalidate register
   - Fallback to OPAL for TCE invalidations
   - Use the device-tree to get available range of M64's
   - Check status of a PHB before using it
   - pci: Don't try to allocate resources that will be reassigned

  Other Power9:
   - Send SIGBUS on unaligned copy and paste from Chris Smart
   - Large Decrementer support from Oliver O'Halloran
   - Load Monitor Register Support from Jack Miller

  Performance improvements from Anton Blanchard:
   - Avoid load hit store in __giveup_fpu() and __giveup_altivec()
   - Avoid load hit store in setup_sigcontext()
   - Remove assembly versions of strcpy, strcat, strlen and strcmp
   - Align hot loops of some string functions

  eBPF JIT from Naveen N. Rao:
   - Fix/enhance 32-bit Load Immediate implementation
   - Optimize 64-bit Immediate loads
   - Introduce rotate immediate instructions
   - A few cleanups
   - Isolate classic BPF JIT specifics into a separate header
   - Implement JIT compiler for extended BPF

  Operator Panel driver from Suraj Jitindar Singh:
   - devicetree/bindings: Add binding for operator panel on FSP machines
   - Add inline function to get rc from an ASYNC_COMP opal_msg
   - Add driver for operator panel on FSP machines

  Sparse fixes from Daniel Axtens:
   - make some things static
   - Introduce asm-prototypes.h
   - Include headers containing prototypes
   - Use #ifdef __BIG_ENDIAN__ #else for REG_BYTE
   - kvm: Clarify __user annotations
   - Pass endianness to sparse
   - Make ppc_md.{halt, restart} __noreturn

  MM fixes & cleanups from Aneesh Kumar K.V:
   - radix: Update LPCR HR bit as per ISA
   - use _raw variant of page table accessors
   - Compile out radix related functions if RADIX_MMU is disabled
   - Clear top 16 bits of va only on older cpus
   - Print formation regarding the the MMU mode
   - hash: Update SDR1 size encoding as documented in ISA 3.0
   - radix: Update PID switch sequence
   - radix: Update machine call back to support new HCALL.
   - radix: Add LPID based tlb flush helpers
   - radix: Add a kernel command line to disable radix
   - Cleanup LPCR defines

  Boot code consolidation from Benjamin Herrenschmidt:
   - Move epapr_paravirt_early_init() to early_init_devtree()
   - cell: Don't use flat device-tree after boot
   - ge_imp3a: Don't use the flat device-tree after boot
   - mpc85xx_ds: Don't use the flat device-tree after boot
   - mpc85xx_rdb: Don't use the flat device-tree after boot
   - Don't test for machine type in rtas_initialize()
   - Don't test for machine type in smp_setup_cpu_maps()
   - dt: Add of_device_compatible_match()
   - Factor do_feature_fixup calls
   - Move 64-bit feature fixup earlier
   - Move 64-bit memory reserves to setup_arch()
   - Use a cachable DART
   - Move FW feature probing out of pseries probe()
   - Put exception configuration in a common place
   - Remove early allocation of the SMU command buffer
   - Move MMU backend selection out of platform code
   - pasemi: Remove IOBMAP allocation from platform probe()
   - mm/hash: Don't use machine_is() early during boot
   - Don't test for machine type to detect HEA special case
   - pmac: Remove spurrious machine type test
   - Move hash table ops to a separate structure
   - Ensure that ppc_md is empty before probing for machine type
   - Move 64-bit probe_machine() to later in the boot process
   - Move 32-bit probe() machine to later in the boot process
   - Get rid of ppc_md.init_early()
   - Move the boot time info banner to a separate function
   - Move setting of {i,d}cache_bsize to initialize_cache_info()
   - Move the content of setup_system() to setup_arch()
   - Move cache info inits to a separate function
   - Re-order the call to smp_setup_cpu_maps()
   - Re-order setup_panic()
   - Make a few boot functions __init
   - Merge 32-bit and 64-bit setup_arch()

  Other new features:
   - tty/hvc: Use IRQF_SHARED for OPAL hvc consoles from Sam Mendoza-Jonas
   - tty/hvc: Use opal irqchip interface if available from Sam Mendoza-Jonas
   - powerpc: Add module autoloading based on CPU features from Alastair D'Silva
   - crypto: vmx - Convert to CPU feature based module autoloading from Alastair D'Silva
   - Wake up kopald polling thread before waiting for events from Benjamin Herrenschmidt
   - xmon: Dump ISA 2.06 SPRs from Michael Ellerman
   - xmon: Dump ISA 2.07 SPRs from Michael Ellerman
   - Add a parameter to disable 1TB segs from Oliver O'Halloran
   - powerpc/boot: Add OPAL console to epapr wrappers from Oliver O'Halloran
   - Assign fixed PHB number based on device-tree properties from Guilherme G. Piccoli
   - pseries: Add pseries hotplug workqueue from John Allen
   - pseries: Add support for hotplug interrupt source from John Allen
   - pseries: Use kernel hotplug queue for PowerVM hotplug events from John Allen
   - pseries: Move property cloning into its own routine from Nathan Fontenot
   - pseries: Dynamic add entires to associativity lookup array from Nathan Fontenot
   - pseries: Auto-online hotplugged memory from Nathan Fontenot
   - pseries: Remove call to memblock_add() from Nathan Fontenot

  cxl:
   - Add set and get private data to context struct from Michael Neuling
   - make base more explicitly non-modular from Paul Gortmaker
   - Use for_each_compatible_node() macro from Wei Yongjun
   - Frederic Barrat
   - Abstract the differences between the PSL and XSL
   - Make vPHB device node match adapter's
   - Philippe Bergheaud
   - Add mechanism for delivering AFU driver specific events
   - Ignore CAPI adapters misplaced in switched slots
   - Refine slice error debug messages
   - Andrew Donnellan
   - static-ify variables to fix sparse warnings
   - PCI/hotplug: pnv_php: export symbols and move struct types needed by cxl
   - PCI/hotplug: pnv_php: handle OPAL_PCI_SLOT_OFFLINE power state
   - Add cxl_check_and_switch_mode() API to switch bi-modal cards
   - remove dead Kconfig options
   - fix potential NULL dereference in free_adapter()
   - Ian Munsie
   - Update process element after allocating interrupts
   - Add support for CAPP DMA mode
   - Fix allowing bogus AFU descriptors with 0 maximum processes
   - Fix allocating a minimum of 2 pages for the SPA
   - Fix bug where AFU disable operation had no effect
   - Workaround XSL bug that does not clear the RA bit after a reset
   - Fix NULL pointer dereference on kernel contexts with no AFU interrupts
   - powerpc/powernv: Split cxl code out into a separate file
   - Add cxl_slot_is_supported API
   - Enable bus mastering for devices using CAPP DMA mode
   - Move cxl_afu_get / cxl_afu_put to base
   - Allow a default context to be associated with an external pci_dev
   - Do not create vPHB if there are no AFU configuration records
   - powerpc/powernv: Add support for the cxl kernel api on the real phb
   - Add support for using the kernel API with a real PHB
   - Add kernel APIs to get & set the max irqs per context
   - Add preliminary workaround for CX4 interrupt limitation
   - Add support for interrupts on the Mellanox CX4
   - Workaround PE=0 hardware limitation in Mellanox CX4
   - powerpc/powernv: Fix pci-cxl.c build when CONFIG_MODULES=n

  selftests:
   - Test unaligned copy and paste from Chris Smart
   - Load Monitor Register Tests from Jack Miller
   - Cyril Bur
   - exec() with suspended transaction
   - Use signed long to read perf_event_paranoid
   - Fix usage message in context_switch
   - Fix generation of vector instructions/types in context_switch
   - Michael Ellerman
   - Use "Delta" rather than "Error" in normal output
   - Import Anton's mmap & futex micro benchmarks
   - Add a test for PROT_SAO"

* tag 'powerpc-4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (263 commits)
  powerpc/mm: Parenthesise IS_ENABLED() in if condition
  tty/hvc: Use opal irqchip interface if available
  tty/hvc: Use IRQF_SHARED for OPAL hvc consoles
  selftests/powerpc: exec() with suspended transaction
  powerpc: Improve comment explaining why we modify VRSAVE
  powerpc/mm: Drop unused externs for hpte_init_beat[_v3]()
  powerpc/mm: Rename hpte_init_lpar() and move the fallback to a header
  powerpc/mm: Fix build break when PPC_NATIVE=n
  crypto: vmx - Convert to CPU feature based module autoloading
  powerpc: Add module autoloading based on CPU features
  powerpc/powernv/ioda: Fix endianness when reading TCEs
  powerpc/mm: Add memory barrier in __hugepte_alloc()
  powerpc/modules: Never restore r2 for a mprofile-kernel style mcount() call
  powerpc/ftrace: Separate the heuristics for checking call sites
  powerpc: Merge 32-bit and 64-bit setup_arch()
  powerpc/64: Make a few boot functions __init
  powerpc: Re-order setup_panic()
  powerpc: Re-order the call to smp_setup_cpu_maps()
  powerpc/32: Move cache info inits to a separate function
  powerpc/64: Move the content of setup_system() to setup_arch()
  ...
2016-07-30 21:01:36 -07:00
Linus Torvalds
e663107fa1 ACPI material for v4.8-rc1
- Support for ACPI SSDT overlays allowing Secondary System
    Description Tables (SSDTs) to be loaded at any time from EFI
    variables or via configfs (Octavian Purdila, Mika Westerberg).
 
  - Support for the ACPI LPI (Low-Power Idle) feature introduced in
    ACPI 6.0 and allowing processor idle states to be represented in
    ACPI tables in a hierarchical way (with the help of Processor
    Container objects) and support for ACPI idle states management
    on ARM64, based on LPI (Sudeep Holla).
 
  - General improvements of ACPI support for NUMA and ARM64 support
    for ACPI-based NUMA (Hanjun Guo, David Daney, Robert Richter).
 
  - General improvements of the ACPI table upgrade mechanism and
    ARM64 support for that feature (Aleksey Makarov, Jon Masters).
 
  - Support for the Boot Error Record Table (BERT) in APEI and
    improvements of kernel messages printed by the error injection
    code (Huang Ying, Borislav Petkov).
 
  - New driver for the Intel Broxton WhiskeyCove PMIC operation
    region and support for the REGS operation region on Broxton,
    PMIC code cleanups (Bin Gao, Felipe Balbi, Paul Gortmaker).
 
  - New driver for the power participant device which is part of the
    Dynamic Power and Thermal Framework (DPTF) and DPTF-related code
    reorganization (Srinivas Pandruvada).
 
  - Support for the platform-initiated graceful shutdown feature
    introduced in ACPI 6.1 (Prashanth Prakash).
 
  - ACPI button driver update related to lid input events generated
    automatically on initialization and system resume that have been
    problematic for some time (Lv Zheng).
 
  - ACPI EC driver cleanups (Lv Zheng).
 
  - Documentation of the ACPICA release automation process and the
    in-kernel ACPI AML debugger (Lv Zheng).
 
  - New blacklist entry and two fixes for the ACPI backlight driver
    (Alex Hung, Arvind Yadav, Ralf Gerbig).
 
  - Cleanups of the ACPI pci_slot driver (Joe Perches, Paul Gortmaker).
 
  - ACPI CPPC code changes to make it more robust against possible
    defects in ACPI tables and new symbol definitions for PCC (Hoan
    Tran).
 
  - System reboot code modification to execute the ACPI _PTS (Prepare
    To Sleep) method in addition to _TTS (Ocean He).
 
  - ACPICA-related change to carry out lock ordering checks in ACPICA
    if ACPICA debug is enabled in the kernel (Lv Zheng).
 
  - Assorted minor fixes and cleanups (Andy Shevchenko, Baoquan He,
    Bhaktipriya Shridhar, Paul Gortmaker, Rafael Wysocki).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJXl8A7AAoJEILEb/54YlRxF0kQAI6mH0yan60Osu4598+VNvgv
 wxOWl1TEbKd+LaJkofRZ+FPzZkQf5c/h/8Oo8Q3LEpFhjkARhhX7ThDjS5v2Nx6v
 I/icQ64ynPUPrw6hGNVrmec9ofZjiAs3j3Rt2bEiae+YN6guvfhWE+kBCHo2G/nN
 o4BSaxYjkphUTDSi4/5BfaocV2sl3apvwjtAj8zgGn4RD81bFFLnblynHkqJVcoN
 HAfm7QTVjT01Zkv565OSZgK8CFcD8Ky2KKKBQvcIW8zQmD6IXaoTHSYSwL0SH+oK
 bxUZUmWVfFWw4kDTAY9mw0QwtWz9ODTWh/WMhs3itWRRN5qHfogs99rCVYFtFufQ
 ODVy4wpt4wmpzZVhyUDTTigAhznPAtCam6EpL1YeNbtyrRN4evvZVFHBZJnmhosX
 zI9iLF4eqdnJZKvh+L1VFU+py8aAZpz1ZEOatNMI+xdhArbGm7v89cldzaRkJhuW
 LZr+JqYQGaOZS5qSnymwJL1KfF66+2QGpzdvzJN5FNIDACoqanATbZ/Iie2ENcM+
 WwCEWrGJFDmM30raBNNcvx0yHFtVkcNbOymla4paVg7i29nu88Ynw4Z6seIIP11C
 DryzLFhw+3jdTg2zK/te/wkhciJ0F+iZjo6VXywSMnwatf36bpdp4r4JLUVfEo2t
 8DOGKyFMLYY1zOPMK9Th
 =YwbM
 -----END PGP SIGNATURE-----

Merge tag 'acpi-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI updates from Rafael Wysocki:
 "The new feaures here are the support for ACPI overlays (allowing ACPI
  tables to be loaded at any time from EFI variables or via configfs)
  and the LPI (Low-Power Idle) support.  Also notable is the ACPI-based
  NUMA support for ARM64.

  Apart from that we have two new drivers, for the DPTF (Dynamic Power
  and Thermal Framework) power participant device and for the Intel
  Broxton WhiskeyCove PMIC, some more PMIC-related changes, support for
  the Boot Error Record Table (BERT) in APEI and support for
  platform-initiated graceful shutdown.

  Plus two new pieces of documentation and usual assorted fixes and
  cleanups in quite a few places.

  Specifics:

   - Support for ACPI SSDT overlays allowing Secondary System
     Description Tables (SSDTs) to be loaded at any time from EFI
     variables or via configfs (Octavian Purdila, Mika Westerberg).

   - Support for the ACPI LPI (Low-Power Idle) feature introduced in
     ACPI 6.0 and allowing processor idle states to be represented in
     ACPI tables in a hierarchical way (with the help of Processor
     Container objects) and support for ACPI idle states management on
     ARM64, based on LPI (Sudeep Holla).

   - General improvements of ACPI support for NUMA and ARM64 support for
     ACPI-based NUMA (Hanjun Guo, David Daney, Robert Richter).

   - General improvements of the ACPI table upgrade mechanism and ARM64
     support for that feature (Aleksey Makarov, Jon Masters).

   - Support for the Boot Error Record Table (BERT) in APEI and
     improvements of kernel messages printed by the error injection code
     (Huang Ying, Borislav Petkov).

   - New driver for the Intel Broxton WhiskeyCove PMIC operation region
     and support for the REGS operation region on Broxton, PMIC code
     cleanups (Bin Gao, Felipe Balbi, Paul Gortmaker).

   - New driver for the power participant device which is part of the
     Dynamic Power and Thermal Framework (DPTF) and DPTF-related code
     reorganization (Srinivas Pandruvada).

   - Support for the platform-initiated graceful shutdown feature
     introduced in ACPI 6.1 (Prashanth Prakash).

   - ACPI button driver update related to lid input events generated
     automatically on initialization and system resume that have been
     problematic for some time (Lv Zheng).

   - ACPI EC driver cleanups (Lv Zheng).

   - Documentation of the ACPICA release automation process and the
     in-kernel ACPI AML debugger (Lv Zheng).

   - New blacklist entry and two fixes for the ACPI backlight driver
     (Alex Hung, Arvind Yadav, Ralf Gerbig).

   - Cleanups of the ACPI pci_slot driver (Joe Perches, Paul Gortmaker).

   - ACPI CPPC code changes to make it more robust against possible
     defects in ACPI tables and new symbol definitions for PCC (Hoan
     Tran).

   - System reboot code modification to execute the ACPI _PTS (Prepare
     To Sleep) method in addition to _TTS (Ocean He).

   - ACPICA-related change to carry out lock ordering checks in ACPICA
     if ACPICA debug is enabled in the kernel (Lv Zheng).

   - Assorted minor fixes and cleanups (Andy Shevchenko, Baoquan He,
     Bhaktipriya Shridhar, Paul Gortmaker, Rafael Wysocki)"

* tag 'acpi-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (71 commits)
  ACPI: enable ACPI_PROCESSOR_IDLE on ARM64
  arm64: add support for ACPI Low Power Idle(LPI)
  drivers: firmware: psci: initialise idle states using ACPI LPI
  cpuidle: introduce CPU_PM_CPU_IDLE_ENTER macro for ARM{32, 64}
  arm64: cpuidle: drop __init section marker to arm_cpuidle_init
  ACPI / processor_idle: Add support for Low Power Idle(LPI) states
  ACPI / processor_idle: introduce ACPI_PROCESSOR_CSTATE
  ACPI / DPTF: move int340x_thermal.c to the DPTF folder
  ACPI / DPTF: Add DPTF power participant driver
  ACPI / lpat: make it explicitly non-modular
  ACPI / dock: make dock explicitly non-modular
  ACPI / PCI: make pci_slot explicitly non-modular
  ACPI / PMIC: remove modular references from non-modular code
  ACPICA: Linux: Enable ACPI_MUTEX_DEBUG for Linux kernel
  ACPI: Rename configfs.c to acpi_configfs.c to prevent link error
  ACPI / debugger: Add AML debugger documentation
  ACPI: Add documentation describing ACPICA release automation
  ACPI: add support for loading SSDTs via configfs
  ACPI: add support for configfs
  efi / ACPI: load SSTDs from EFI variables
  ...
2016-07-26 17:56:45 -07:00
Linus Torvalds
6453dbdda3 Power management material for v4.8-rc1
- Rework the cpufreq governor interface to make it more straightforward
    and modify the conservative governor to avoid using transition
    notifications (Rafael Wysocki).
 
  - Rework the handling of frequency tables by the cpufreq core to make
    it more efficient (Viresh Kumar).
 
  - Modify the schedutil governor to reduce the number of wakeups it
    causes to occur in cases when the CPU frequency doesn't need to be
    changed (Steve Muckle, Viresh Kumar).
 
  - Fix some minor issues and clean up code in the cpufreq core and
    governors (Rafael Wysocki, Viresh Kumar).
 
  - Add Intel Broxton support to the intel_pstate driver (Srinivas
    Pandruvada).
 
  - Fix problems related to the config TDP feature and to the validity
    of the MSR_HWP_INTERRUPT register in intel_pstate (Jan Kiszka,
    Srinivas Pandruvada).
 
  - Make intel_pstate update the cpu_frequency tracepoint even if
    the frequency doesn't change to avoid confusing powertop (Rafael
    Wysocki).
 
  - Clean up the usage of __init/__initdata in intel_pstate, mark some
    of its internal variables as __read_mostly and drop an unused
    structure element from it (Jisheng Zhang, Carsten Emde).
 
  - Clean up the usage of some duplicate MSR symbols in intel_pstate
    and turbostat (Srinivas Pandruvada).
 
  - Update/fix the powernv, s3c24xx and mvebu cpufreq drivers (Akshay
    Adiga, Viresh Kumar, Ben Dooks).
 
  - Fix a regression (introduced during the 4.5 cycle) in the
    pcc-cpufreq driver by reverting the problematic commit (Andreas
    Herrmann).
 
  - Add support for Intel Denverton to intel_idle, clean up Broxton
    support in it and make it explicitly non-modular (Jacob Pan,
    Jan Beulich, Paul Gortmaker).
 
  - Add support for Denverton and Ivy Bridge server to the Intel RAPL
    power capping driver and make it more careful about the handing
    of MSRs that may not be present (Jacob Pan, Xiaolong Wang).
 
  - Fix resume from hibernation on x86-64 by making the CPU offline
    during resume avoid using MONITOR/MWAIT in the "play dead" loop
    which may lead to an inadvertent "revival" of a "dead" CPU and
    a page fault leading to a kernel crash from it (Rafael Wysocki).
 
  - Make memory management during resume from hibernation more
    straightforward (Rafael Wysocki).
 
  - Add debug features that should help to detect problems related
    to hibernation and resume from it (Rafael Wysocki, Chen Yu).
 
  - Clean up hibernation core somewhat (Rafael Wysocki).
 
  - Prevent KASAN from instrumenting the hibernation core which leads
    to large numbers of false-positives from it (James Morse).
 
  - Prevent PM (hibernate and suspend) notifiers from being called
    during the cleanup phase if they have not been called during the
    corresponding preparation phase which is possible if one of the
    other notifiers returns an error at that time (Lianwei Wang).
 
  - Improve suspend-related debug printout in the tasks freezer and
    clean up suspend-related console handling (Roger Lu, Borislav
    Petkov).
 
  - Update the AnalyzeSuspend script in the kernel sources to
    version 4.2 (Todd Brandt).
 
  - Modify the generic power domains framework to make it handle
    system suspend/resume better (Ulf Hansson).
 
  - Make the runtime PM framework avoid resuming devices synchronously
    when user space changes the runtime PM settings for them and
    improve its error reporting (Rafael Wysocki, Linus Walleij).
 
  - Fix error paths in devfreq drivers (exynos, exynos-ppmu, exynos-bus)
    and in the core, make some devfreq code explicitly non-modular and
    change some of it into tristate (Bartlomiej Zolnierkiewicz,
    Peter Chen, Paul Gortmaker).
 
  - Add DT support to the generic PM clocks management code and make
    it export some more symbols (Jon Hunter, Paul Gortmaker).
 
  - Make the PCI PM core code slightly more robust against possible
    driver errors (Andy Shevchenko).
 
  - Make it possible to change DESTDIR and PREFIX in turbostat
    (Andy Shevchenko).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJXl7/dAAoJEILEb/54YlRx+VgQAIQJOWvxKew3Yl02c/sdj9OT
 5VNnFrzGzdcAPofvvG9qGq8B0Es1vYehJpwwOB21ri8EvYv0riIiU1yrqslObojQ
 oaZOkSBpbIoKjGR4CpYA/A+feE+8EqIBdPGd+lx5a6oRdUi7tRVHBG9lyLO3FB/i
 jan1q8dMpZsmu+Y+rVVHGnCVuIlIEqr2ZnZfCwDAulO2Arp/QFAh4kH08ELATvrl
 bkPa25vq7/VMP/vCDzrfZKD5mUuKogIRu/J5wx4py1nE+FB35cKKyqBOgklLwAeY
 UI8vjDhr/myNUs54AZlktOkq47TCYvjvhX9kmOxBjuWqFbRusU012IRek1fYPRIV
 ZqbkqNX7UEVQwunAEg9AyFwyzEtOht93dQDT5RLEd4QzKuM76gmHpLeTGGMzE+nu
 FnmF9JGl4DVwqpZl9yU2+hR2Mt3bP8OF8qYmNiGUB3KO4emPslhSd+6y8liA5Bx2
 SJf0Gb//vaHCh3/uMnwAonYPqRkZvBLOMwuL1VUjNQfRMnQtDdgHMYB1aT/EglPA
 8ww6j4J8rVRLAxvYQ3UEmNA/vBNclKXblRR18+JddEZP9/oX0ATfwnCCUpr839uk
 xxyQhrm4/AI60+PHWCX4GG80YrKdOGTkF7LXCQZanVWjjuyF17rufegZ2YWLT07v
 JU1Cmumfdy2jJluT8xsR
 =uVGz
 -----END PGP SIGNATURE-----

Merge tag 'pm-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael  Wysocki:
 "Again, the majority of changes go into the cpufreq subsystem, but
  there are no big features this time.  The cpufreq changes that stand
  out somewhat are the governor interface rework and improvements
  related to the handling of frequency tables.  Apart from those, there
  are fixes and new device/CPU IDs in drivers, cleanups and an
  improvement of the new schedutil governor.

  Next, there are some changes in the hibernation core, including a fix
  for a nasty problem related to the MONITOR/MWAIT usage by CPU offline
  during resume from hibernation, a few core improvements related to
  memory management during resume, a couple of additional debug features
  and cleanups.

  Finally, we have some fixes and cleanups in the devfreq subsystem,
  generic power domains framework improvements related to system
  suspend/resume, support for some new chips in intel_idle and in the
  power capping RAPL driver, a new version of the AnalyzeSuspend utility
  and some assorted fixes and cleanups.

  Specifics:

   - Rework the cpufreq governor interface to make it more
     straightforward and modify the conservative governor to avoid using
     transition notifications (Rafael Wysocki).

   - Rework the handling of frequency tables by the cpufreq core to make
     it more efficient (Viresh Kumar).

   - Modify the schedutil governor to reduce the number of wakeups it
     causes to occur in cases when the CPU frequency doesn't need to be
     changed (Steve Muckle, Viresh Kumar).

   - Fix some minor issues and clean up code in the cpufreq core and
     governors (Rafael Wysocki, Viresh Kumar).

   - Add Intel Broxton support to the intel_pstate driver (Srinivas
     Pandruvada).

   - Fix problems related to the config TDP feature and to the validity
     of the MSR_HWP_INTERRUPT register in intel_pstate (Jan Kiszka,
     Srinivas Pandruvada).

   - Make intel_pstate update the cpu_frequency tracepoint even if the
     frequency doesn't change to avoid confusing powertop (Rafael
     Wysocki).

   - Clean up the usage of __init/__initdata in intel_pstate, mark some
     of its internal variables as __read_mostly and drop an unused
     structure element from it (Jisheng Zhang, Carsten Emde).

   - Clean up the usage of some duplicate MSR symbols in intel_pstate
     and turbostat (Srinivas Pandruvada).

   - Update/fix the powernv, s3c24xx and mvebu cpufreq drivers (Akshay
     Adiga, Viresh Kumar, Ben Dooks).

   - Fix a regression (introduced during the 4.5 cycle) in the
     pcc-cpufreq driver by reverting the problematic commit (Andreas
     Herrmann).

   - Add support for Intel Denverton to intel_idle, clean up Broxton
     support in it and make it explicitly non-modular (Jacob Pan, Jan
     Beulich, Paul Gortmaker).

   - Add support for Denverton and Ivy Bridge server to the Intel RAPL
     power capping driver and make it more careful about the handing of
     MSRs that may not be present (Jacob Pan, Xiaolong Wang).

   - Fix resume from hibernation on x86-64 by making the CPU offline
     during resume avoid using MONITOR/MWAIT in the "play dead" loop
     which may lead to an inadvertent "revival" of a "dead" CPU and a
     page fault leading to a kernel crash from it (Rafael Wysocki).

   - Make memory management during resume from hibernation more
     straightforward (Rafael Wysocki).

   - Add debug features that should help to detect problems related to
     hibernation and resume from it (Rafael Wysocki, Chen Yu).

   - Clean up hibernation core somewhat (Rafael Wysocki).

   - Prevent KASAN from instrumenting the hibernation core which leads
     to large numbers of false-positives from it (James Morse).

   - Prevent PM (hibernate and suspend) notifiers from being called
     during the cleanup phase if they have not been called during the
     corresponding preparation phase which is possible if one of the
     other notifiers returns an error at that time (Lianwei Wang).

   - Improve suspend-related debug printout in the tasks freezer and
     clean up suspend-related console handling (Roger Lu, Borislav
     Petkov).

   - Update the AnalyzeSuspend script in the kernel sources to version
     4.2 (Todd Brandt).

   - Modify the generic power domains framework to make it handle system
     suspend/resume better (Ulf Hansson).

   - Make the runtime PM framework avoid resuming devices synchronously
     when user space changes the runtime PM settings for them and
     improve its error reporting (Rafael Wysocki, Linus Walleij).

   - Fix error paths in devfreq drivers (exynos, exynos-ppmu,
     exynos-bus) and in the core, make some devfreq code explicitly
     non-modular and change some of it into tristate (Bartlomiej
     Zolnierkiewicz, Peter Chen, Paul Gortmaker).

   - Add DT support to the generic PM clocks management code and make it
     export some more symbols (Jon Hunter, Paul Gortmaker).

   - Make the PCI PM core code slightly more robust against possible
     driver errors (Andy Shevchenko).

   - Make it possible to change DESTDIR and PREFIX in turbostat (Andy
     Shevchenko)"

* tag 'pm-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (89 commits)
  Revert "cpufreq: pcc-cpufreq: update default value of cpuinfo_transition_latency"
  PM / hibernate: Introduce test_resume mode for hibernation
  cpufreq: export cpufreq_driver_resolve_freq()
  cpufreq: Disallow ->resolve_freq() for drivers providing ->target_index()
  PCI / PM: check all fields in pci_set_platform_pm()
  cpufreq: acpi-cpufreq: use cached frequency mapping when possible
  cpufreq: schedutil: map raw required frequency to driver frequency
  cpufreq: add cpufreq_driver_resolve_freq()
  cpufreq: intel_pstate: Check cpuid for MSR_HWP_INTERRUPT
  intel_pstate: Update cpu_frequency tracepoint every time
  cpufreq: intel_pstate: clean remnant struct element
  PM / tools: scripts: AnalyzeSuspend v4.2
  x86 / hibernate: Use hlt_play_dead() when resuming from hibernation
  cpufreq: powernv: Replacing pstate_id with frequency table index
  intel_pstate: Fix MSR_CONFIG_TDP_x addressing in core_get_max_pstate()
  PM / hibernate: Image data protection during restoration
  PM / hibernate: Add missing braces in __register_nosave_region()
  PM / hibernate: Clean up comments in snapshot.c
  PM / hibernate: Clean up function headers in snapshot.c
  PM / hibernate: Add missing braces in hibernate_setup()
  ...
2016-07-26 17:29:07 -07:00
Linus Torvalds
0f776dc377 Some big changes this month, headlined by the addition of a new formatted
documentation mechanism based on the Sphinx system.  The objectives here
 are to make it easier to create better-integrated (and more attractive)
 documents while (eventually) dumping our one-of-a-kind, cobbled-together
 system for something that is widely used and maintained by others.  There's
 a fair amount of information what's being done, why, and how to use it in:
 
   https://lwn.net/Articles/692704/
   https://lwn.net/Articles/692705/
 
 Closer to home, Documentation/kernel-documentation.rst describes how it
 works.
 
 For now, the new system exists alongside the old one; you should soon see
 the GPU documentation converted over in the DRM pull and some significant
 media conversion work as well.  Once all the docs have been moved over and
 we're convinced that the rough edges (of which are are a few) have been
 smoothed over, the DocBook-based stuff should go away.
 
 Primary credit is to Jani Nikula for doing the heavy lifting to make this
 stuff actually work; there has also been notable effort from Markus Heiser,
 Daniel Vetter, and Mauro Carvalho Chehab.
 
 Expect a couple of conflicts on the new index.rst file over the course of
 the merge window; they are trivially resolvable.  That file may be a bit of
 a conflict magnet in the short term, but I don't expect that situation to
 last for any real length of time.
 
 Beyond that, of course, we have the usual collection of tweaks, updates,
 and typo fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXlT8bAAoJEI3ONVYwIuV6IF0QAM7qpEgAveXgwzGr18ReftjB
 ryyPXdLNX8R7fQkUAu85Znlw93k4+7QxHseBgZ1I3t9IhjvzemidOKfj96SJ0DVE
 zco5FUTO1TPfO2uG8asNzlXSrwktrEZoFTraRIYpCjAAimg/UEQAM4xgNOJfmW39
 8eLg6dhnzqnfCH6M+Q7AZPLmqNSOfA2qNFqHNs7VCbwjLQC0l4yw4PHOsdX0QhCL
 NtlukHOhB4CwaELDl6lZOQgnz79e4pDljFd/wA/vVpdq7ev8NnOgVVt93M2fUvLX
 Bdfzo2OtZg7LJnWtpQl2LJq2MJJdOmgIw+ls6cB5gvxV3+CCIndE/6IIbimC/lZi
 DiaaqVU/EV3AemBDbqErO4k3ZvMT2ZTaSx1OQoLpIwNAsAkEOkb+t2hcwrTqhxg1
 kEIXEEboXwStBtH3iar2YiGHQWUhia4mxfv5n4Dvamaca4tGWXHWxSRjbRcaJ1ef
 v1kt6ymjwr2sd9116EUxngfYONwlrhk5F87D/dC2eQzEyS0z7+F8wWb/h2gsAaU1
 6oVCoQjTe2KAc/7dHINMSIjg2TfVfHS5XIhWu5z6wyxRb8ey9QuKLQYlOTV/L3Ms
 aR4O6qvDIsIbOvEd+hHSIbeG7JOPd0LdSI4tdo4d9kquW2OJ6TmmOr/ihbJt430v
 s/Qxqwgme/8DJd3KcV6j
 =4fDK
 -----END PGP SIGNATURE-----

Merge tag 'docs-for-linus' of git://git.lwn.net/linux

Pull documentation updates from Jonathan Corbet:
 "Some big changes this month, headlined by the addition of a new
  formatted documentation mechanism based on the Sphinx system.

  The objectives here are to make it easier to create better-integrated
  (and more attractive) documents while (eventually) dumping our
  one-of-a-kind, cobbled-together system for something that is widely
  used and maintained by others.  There's a fair amount of information
  what's being done, why, and how to use it in:

    https://lwn.net/Articles/692704/
    https://lwn.net/Articles/692705/

  Closer to home, Documentation/kernel-documentation.rst describes how
  it works.

  For now, the new system exists alongside the old one; you should soon
  see the GPU documentation converted over in the DRM pull and some
  significant media conversion work as well.  Once all the docs have
  been moved over and we're convinced that the rough edges (of which are
  are a few) have been smoothed over, the DocBook-based stuff should go
  away.

  Primary credit is to Jani Nikula for doing the heavy lifting to make
  this stuff actually work; there has also been notable effort from
  Markus Heiser, Daniel Vetter, and Mauro Carvalho Chehab.

  Expect a couple of conflicts on the new index.rst file over the course
  of the merge window; they are trivially resolvable.  That file may be
  a bit of a conflict magnet in the short term, but I don't expect that
  situation to last for any real length of time.

  Beyond that, of course, we have the usual collection of tweaks,
  updates, and typo fixes"

* tag 'docs-for-linus' of git://git.lwn.net/linux: (77 commits)
  doc-rst: kernel-doc: fix handling of address_space tags
  Revert "doc/sphinx: Enable keep_warnings"
  doc-rst: kernel-doc directive, fix state machine reporter
  docs: deprecate kernel-doc-nano-HOWTO.txt
  doc/sphinx: Enable keep_warnings
  Documentation: add watermark_scale_factor to the list of vm systcl file
  kernel-doc: Fix up warning output
  docs: Get rid of some kernel-documentation warnings
  doc-rst: add an option to ignore DocBooks when generating docs
  workqueue: Fix a typo in workqueue.txt
  Doc: ocfs: Fix typo in filesystems/ocfs2-online-filecheck.txt
  Documentation/sphinx: skip build if user requested specific DOCBOOKS
  Documentation: add cleanmediadocs to the documentation targets
  Add .pyc files to .gitignore
  Doc: PM: Fix a typo in intel_powerclamp.txt
  doc-rst: flat-table directive - initial implementation
  Documentation: add meta-documentation for Sphinx and kernel-doc
  Documentation: tiny typo fix in usb/gadget_multi.txt
  Documentation: fix wrong value in md.txt
  bcache: documentation formatting, edited for clarity, stripe alignment notes
  ...
2016-07-26 13:05:11 -07:00
Linus Torvalds
015cd867e5 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky:
 "There are a couple of new things for s390 with this merge request:

   - a new scheduling domain "drawer" is added to reflect the unusual
     topology found on z13 machines.  Performance tests showed up to 8
     percent gain with the additional domain.

   - the new crc-32 checksum crypto module uses the vector-galois-field
     multiply and sum SIMD instruction to speed up crc-32 and crc-32c.

   - proper __ro_after_init support, this requires RO_AFTER_INIT_DATA in
     the generic vmlinux.lds linker script definitions.

   - kcov instrumentation support.  A prerequisite for that is the
     inline assembly basic block cleanup, which is the reason for the
     net/iucv/iucv.c change.

   - support for 2GB pages is added to the hugetlbfs backend.

  Then there are two removals:

   - the oprofile hardware sampling support is dead code and is removed.
     The oprofile user space uses the perf interface nowadays.

   - the ETR clock synchronization is removed, this has been superseeded
     be the STP clock synchronization.  And it always has been
     "interesting" code..

  And the usual bug fixes and cleanups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (82 commits)
  s390/pci: Delete an unnecessary check before the function call "pci_dev_put"
  s390/smp: clean up a condition
  s390/cio/chp : Remove deprecated create_singlethread_workqueue
  s390/chsc: improve channel path descriptor determination
  s390/chsc: sanitize fmt check for chp_desc determination
  s390/cio: make fmt1 channel path descriptor optional
  s390/chsc: fix ioctl CHSC_INFO_CU command
  s390/cio/device_ops: fix kernel doc
  s390/cio: allow to reset channel measurement block
  s390/console: Make preferred console handling more consistent
  s390/mm: fix gmap tlb flush issues
  s390/mm: add support for 2GB hugepages
  s390: have unique symbol for __switch_to address
  s390/cpuinfo: show maximum thread id
  s390/ptrace: clarify bits in the per_struct
  s390: stack address vs thread_info
  s390: remove pointless load within __switch_to
  s390: enable kcov support
  s390/cpumf: use basic block for ecctr inline assembly
  s390/hypfs: use basic block for diag inline assembly
  ...
2016-07-26 12:22:51 -07:00
Linus Torvalds
55392c4c06 Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
 "This update provides the following changes:

   - The rework of the timer wheel which addresses the shortcomings of
     the current wheel (cascading, slow search for next expiring timer,
     etc).  That's the first major change of the wheel in almost 20
     years since Finn implemted it.

   - A large overhaul of the clocksource drivers init functions to
     consolidate the Device Tree initialization

   - Some more Y2038 updates

   - A capability fix for timerfd

   - Yet another clock chip driver

   - The usual pile of updates, comment improvements all over the place"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (130 commits)
  tick/nohz: Optimize nohz idle enter
  clockevents: Make clockevents_subsys static
  clocksource/drivers/time-armada-370-xp: Fix return value check
  timers: Implement optimization for same expiry time in mod_timer()
  timers: Split out index calculation
  timers: Only wake softirq if necessary
  timers: Forward the wheel clock whenever possible
  timers/nohz: Remove pointless tick_nohz_kick_tick() function
  timers: Optimize collect_expired_timers() for NOHZ
  timers: Move __run_timers() function
  timers: Remove set_timer_slack() leftovers
  timers: Switch to a non-cascading wheel
  timers: Reduce the CPU index space to 256k
  timers: Give a few structs and members proper names
  hlist: Add hlist_is_singular_node() helper
  signals: Use hrtimer for sigtimedwait()
  timers: Remove the deprecated mod_timer_pinned() API
  timers, net/ipv4/inet: Initialize connection request timers as pinned
  timers, drivers/tty/mips_ejtag: Initialize the poll timer as pinned
  timers, drivers/tty/metag_da: Initialize the poll timer as pinned
  ...
2016-07-25 20:43:12 -07:00
Keith Busch
e16b466059 PCI: Allow additional bus numbers for hotplug bridges
A user may hot add a switch requiring more than one bus to enumerate.  This
previously required a system reboot if BIOS did not sufficiently pad the
bus resource, which they frequently don't do.

Add a kernel parameter so a user can specify the minimum number of bus
numbers to reserve for a hotplug bridge's subordinate buses so rebooting
won't be necessary.

The default is 1, which is equivalent to previous behavior.

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-07-25 12:52:47 -05:00
Rafael J. Wysocki
6149dffcb5 Merge branches 'acpi-processor', 'acpi-cppc', 'acpi-apei' and 'acpi-sleep'
* acpi-processor:
  ACPI: enable ACPI_PROCESSOR_IDLE on ARM64
  arm64: add support for ACPI Low Power Idle(LPI)
  drivers: firmware: psci: initialise idle states using ACPI LPI
  cpuidle: introduce CPU_PM_CPU_IDLE_ENTER macro for ARM{32, 64}
  arm64: cpuidle: drop __init section marker to arm_cpuidle_init
  ACPI / processor_idle: Add support for Low Power Idle(LPI) states
  ACPI / processor_idle: introduce ACPI_PROCESSOR_CSTATE

* acpi-cppc:
  mailbox: pcc: Add PCC request and free channel declarations
  ACPI / CPPC: Prevent cpc_desc_ptr points to the invalid data
  ACPI: CPPC: Return error if _CPC is invalid on a CPU

* acpi-apei:
  ACPI / APEI: Add Boot Error Record Table (BERT) support
  ACPI / einj: Make error paths more talkative
  ACPI / einj: Convert EINJ_PFX to proper pr_fmt

* acpi-sleep:
  ACPI: Execute _PTS before system reboot
2016-07-25 13:42:25 +02:00
Aneesh Kumar K.V
b275bfb269 powerpc/mm/radix: Add a kernel command line to disable radix
This patch adds the kernel command line disable_radix which disable
the radix MMU mode even if firmware indicates radix support via
ibm,pa-features device tree node.

This helps in testing different MMU mode easily.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-17 16:42:55 +10:00
Trond Myklebust
ff3ac5c3dc SUNRPC: Add a server side per-connection limit
Allow the user to limit the number of requests serviced through a single
connection, to help prevent faster clients from starving slower clients.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-07-13 15:53:48 -04:00
Rafael J. Wysocki
4c0b6c10fb PM / hibernate: Image data protection during restoration
Make it possible to protect all pages holding image data during
hibernate image restoration by setting them read-only (so as to
catch attempts to write to those pages after image data have been
stored in them).

This adds overhead to image restoration code (it may cause large
page mappings to be split as a result of page flags changes) and
the errors it protects against should never happen in theory, so
the feature is only active after passing hibernate=protect_image
to the command line of the restore kernel.

Also it only is built if CONFIG_DEBUG_RODATA is set.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-10 02:12:10 +02:00
Octavian Purdila
475fb4e8b2 efi / ACPI: load SSTDs from EFI variables
This patch allows SSDTs to be loaded from EFI variables. It works by
specifying the EFI variable name containing the SSDT to be loaded. All
variables with the same name (regardless of the vendor GUID) will be
loaded.

Note that we can't use acpi_install_table and we must rely on the
dynamic ACPI table loading and bus re-scanning mechanisms. That is
because I2C/SPI controllers are initialized earlier then the EFI
subsystems and all I2C/SPI ACPI devices are enumerated when the
I2C/SPI controllers are initialized.

Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-08 21:52:35 +02:00
Oliver O'Halloran
faf7882962 powerpc/mm: Add a parameter to disable 1TB segs
This patch adds the kernel command line parameter "no_tb_segs" which
forces the kernel to use 256MB rather than 1TB segments. Forcing the use
of 256MB segments makes it considerably easier to test code that depends
on an SLB miss occurring.

Suggested-by: Michael Neuling <mikey@neuling.org>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-05 23:58:54 +10:00
Huang Ying
a3e2acc5e3 ACPI / APEI: Add Boot Error Record Table (BERT) support
ACPI/APEI is designed to verifiy/report H/W errors, like Corrected
Error(CE) and Uncorrected Error(UC). It contains four tables: HEST,
ERST, EINJ and BERT. The first three tables have been merged for
a long time, but because of lacking BIOS support for BERT, the
support for BERT is pending until now. Recently on ARM 64 platform
it is has been supported. So here we come.

Under normal circumstances, when a hardware error occurs, kernel will
be notified via NMI, MCE or some other method, then kernel will
process the error condition, report it, and recover it if possible.
But sometime, the situation is so bad, so that firmware may choose to
reset directly without notifying Linux kernel.

Linux kernel can use the Boot Error Record Table (BERT) to get the
un-notified hardware errors that occurred in a previous boot. In this
patch, the error information is reported via printk.

For more information about BERT, please refer to ACPI Specification
version 6.0, section 18.3.1:
  http://www.uefi.org/sites/default/files/resources/ACPI_6.0.pdf

The following log is a BERT record after system reboot because of hitting
a fatal memory error:
BERT: Error records from previous boot:
[Hardware Error]: It has been corrected by h/w and requires no further action
[Hardware Error]: event severity: corrected
[Hardware Error]:  Error 0, type: recoverable
[Hardware Error]:   section_type: memory error
[Hardware Error]:   error_status: 0x0000000000000400
[Hardware Error]:   physical_address: 0xffffffffffffffff
[Hardware Error]:   card: 1 module: 2 bank: 3 row: 1 column: 2 bit_position: 5
[Hardware Error]:   error_type: 2, single-bit ECC

[Tomasz Nowicki: Clear error status at the end of error handling]
[Tony: Applied some cleanups suggested by Fu Wei]
[Fu Wei: delete EXPORT_SYMBOL_GPL(bert_disable), improve the code]

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org>
Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>
Tested-by: Jonathan (Zhixiong) Zhang <zjzhang@codeaurora.org>
Signed-off-by: Fu Wei <fu.wei@linaro.org>
Tested-by: Tyler Baicar <tbaicar@codeaurora.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-29 23:35:05 +02:00
Will Deacon
46fd5c6b30 clocksource/drivers/arm_arch_timer: Control the evtstrm via the cmdline
Disabling the eventstream can be useful for both remotely debugging a
deployed production system and development of code using WFE-based
polling loops. Whilst this can currently be controlled via a Kconfig
option (CONFIG_ARM_ARCH_TIMER_EVTSTREAM), it's often desirable to toggle
the feature on the command line, so this patch adds a new command-line
option ("clocksource.arm_arch_timer.evtstrm") to do just that. The
default behaviour is determined based on CONFIG_ARM_ARCH_TIMER_EVTSTREAM.

Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-06-28 11:35:50 +02:00
Heiko Carstens
93dd49d002 s390/oprofile: remove hardware sampler support
Remove hardware sampler support from oprofile module.

The oprofile user space utilty has been switched to use the kernel
perf interface, for which we also provide hardware sampling support.

In addition the hardware sampling support is also slightly broken: it
supports only 16 bits for the pid and therefore would generate wrong
results on machines which have a pid >64k.

Also the pt_regs structure which was passed to oprofile common code
cannot necessarily be used to generate sane backtraces, since the
task(s) in question may run while the samples are fed to oprofile.
So the result would be more or less random.

However given that the only user space tools switched to the perf
interface already four years ago the hardware sampler code seems to be
unused code, and therefore it should be reasonable to remove it.

The timer based oprofile support continues to work.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Andreas Arnez <arnez@linux.vnet.ibm.com>
Acked-by: Andreas Krebbel <krebbel@linux.vnet.ibm.com>
Acked-by: Robert Richter <rric@kernel.org>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-06-28 09:32:22 +02:00
Kees Cook
65fe935dd2 x86/KASLR, x86/power: Remove x86 hibernation restrictions
With the following fix:

  70595b479ce1 ("x86/power/64: Fix crash whan the hibernation code passes control to the image kernel")

... there is no longer a problem with hibernation resuming a
KASLR-booted kernel image, so remove the restriction.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linux PM list <linux-pm@vger.kernel.org>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: linux-doc@vger.kernel.org
Link: http://lkml.kernel.org/r/20160613221002.GA29719@www.outflux.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-26 12:32:03 +02:00
Koehrer Mathias (ETAS/ESW5)
644a544fd9 PCI: Extending pci=resource_alignment to specify device/vendor IDs
Some uio-based PCI drivers, e.g., uio_cif do not work if the assigned PCI
memory resources are not page aligned.

By using the kernel option "pci=resource_alignment" it is possible to force
single PCI boards to use page alignment for their memory resources.
However, this is fairly cumbersome if several of these boards are in use
as the specification of the cards has to be done via PCI bus/slot/function
number which might change, e.g., by adding another board.

Extend the kernel option "pci=resource_alignment" to allow specification of
relevant devices via PCI device/vendor (and subdevice/subvendor) IDs.  The
specification of the devices via device/vendor is indicated by a leading
string "pci:" as argument to "pci=resource_alignment".  The format of the
specification is pci:<vendor>:<device>[:<subvendor>:<subdevice>]

Signed-off-by: Mathias Koehrer <mathias.koehrer@etas.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-06-21 17:00:34 -05:00
Mika Westerberg
9d26d3a8f1 PCI: Put PCIe ports into D3 during suspend
Currently the Linux PCI core does not touch power state of PCI bridges and
PCIe ports when system suspend is entered.  Leaving them in D0 consumes
power unnecessarily and may prevent the CPU from entering deeper C-states.

With recent PCIe hardware we can power down the ports to save power given
that we take into account few restrictions:

  - The PCIe port hardware is recent enough, starting from 2015.

  - Devices connected to PCIe ports are effectively in D3cold once the port
    is transitioned to D3 (the config space is not accessible anymore and
    the link may be powered down).

  - Devices behind the PCIe port need to be allowed to transition to D3cold
    and back.  There is a way both drivers and userspace can forbid this.

  - If the device behind the PCIe port is capable of waking the system it
    needs to be able to do so from D3cold.

This patch adds a new flag to struct pci_device called 'bridge_d3'.  This
flag is set and cleared by the PCI core whenever there is a change in power
management state of any of the devices behind the PCIe port.  When system
later on is suspended we only need to check this flag and if it is true
transition the port to D3 otherwise we leave it in D0.

Also provide override mechanism via command line parameter
"pcie_port_pm=[off|force]" that can be used to disable or enable the
feature regardless of the BIOS manufacturing date.

Tested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-13 14:57:36 -05:00
Brian Norris
d81749ea8b doc: clarify that trace_events= takes a comma-separated list
It took me browsing through the source code to determine that I was,
indeed, using the wrong delimiter in my command lines. So I might as
well document it for the next person.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-06-03 13:32:58 -06:00
Linus Torvalds
e10abc629f TTY and Serial driver update for 4.7-rc1
Here's the large TTY and Serial driver update for 4.7-rc1.
 
 A few new serial drivers are added here, and Peter has fixed a bunch of
 long-standing bugs in the tty layer and serial drivers as normal.  Full
 details in the shortlog.
 
 All of these have been in linux-next for a while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlc/0/oACgkQMUfUDdst+ynzyQCgsa54VNijdAzU6AA5HEfqmf2M
 cGMAn1boH7hUWlAbJmzzihx4JASoGjYW
 =V5VH
 -----END PGP SIGNATURE-----

Merge tag 'tty-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty and serial driver updates from Greg KH:
 "Here's the large TTY and Serial driver update for 4.7-rc1.

  A few new serial drivers are added here, and Peter has fixed a bunch
  of long-standing bugs in the tty layer and serial drivers as normal.
  Full details in the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (88 commits)
  MAINTAINERS: 8250: remove website reference
  serial: core: Fix port mutex assert if lockdep disabled
  serial: 8250_dw: fix wrong logic in dw8250_check_lcr()
  tty: vt, finish looping on duplicate
  tty: vt, return error when con_startup fails
  QE-UART: add "fsl,t1040-ucc-uart" to of_device_id
  serial: mctrl_gpio: Drop support for out1-gpios and out2-gpios
  serial: 8250dw: Add device HID for future AMD UART controller
  Fix OpenSSH pty regression on close
  serial: mctrl_gpio: add IRQ locking
  serial: 8250: Integrate Fintek into 8250_base
  serial: mps2-uart: add support for early console
  serial: mps2-uart: add MPS2 UART driver
  dt-bindings: document the MPS2 UART bindings
  serial: sirf: Use generic uart-has-rtscts DT property
  serial: sirf: Introduce helper variable struct device_node *np
  serial: mxs-auart: Use generic uart-has-rtscts DT property
  serial: imx: Use generic uart-has-rtscts DT property
  doc: DT: Add Generic Serial Device Tree Bindings
  serial: 8250: of: Make tegra_serial_handle_break() static
  ...
2016-05-20 20:57:27 -07:00
Linus Torvalds
a1c28b75a9 Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
 "Changes included in this pull request:

   - revert pxa2xx-flash back to using ioremap_cached() and switch
     memremap() to use arch_memremap_wb()

   - remove pci=firmware command line argument handling

   - remove unnecessary arm_dma_set_mask() implementation, the generic
     implementation will do for ARM

   - removal of the ARM kallsyms "hack" to work around mode switching
     veneers and vectors located below PAGE_OFFSET

   - tidy up build system output a little

   - add L2 cache power management DT bindings

   - remove duplicated local_irq_disable() in reboot paths

   - handle AMBA primecell devices better at registration time with PM
     domains (needed for Samsung SoCs)

   - ARM specific preparation to support Keystone II kexec"

* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8567/1: cache-uniphier: activate ways for secondary CPUs
  ARM: 8570/2: Documentation: devicetree: Add PL310 PM bindings
  ARM: 8569/1: pl2x0: Add OF control of cache power management
  ARM: 8568/1: reboot: remove duplicated local_irq_disable()
  ARM: 8566/1: drivers: amba: properly handle devices with power domains
  ARM: provide arm_has_idmap_alias() helper
  ARM: kexec: remove 512MB restriction on kexec crashdump
  ARM: provide improved virt_to_idmap() functionality
  ARM: kexec: fix crashkernel= handling
  ARM: 8557/1: specify install, zinstall, and uinstall as PHONY targets
  ARM: 8562/1: suppress "include/generated/mach-types.h is up to date."
  ARM: 8553/1: kallsyms: remove --page-offset command line option
  ARM: 8552/1: kallsyms: remove special lower address limit for CONFIG_ARM
  ARM: 8555/1: kallsyms: ignore ARM mode switching veneers
  ARM: 8548/1: dma-mapping: remove arm_dma_set_mask()
  ARM: 8554/1: kernel: pci: remove pci=firmware command line parameter handling
  ARM: memremap: implement arch_memremap_wb()
  memremap: add arch specific hook for MEMREMAP_WB mappings
  mtd: pxa2xx-flash: switch back from memremap to ioremap_cached
  ARM: reintroduce ioremap_cached() for creating cached I/O mappings
2016-05-20 10:01:38 -07:00
Linus Torvalds
a05a70db34 Merge branch 'akpm' (patches from Andrew)
Merge updates from Andrew Morton:

 - fsnotify fix

 - poll() timeout fix

 - a few scripts/ tweaks

 - debugobjects updates

 - the (small) ocfs2 queue

 - Minor fixes to kernel/padata.c

 - Maybe half of the MM queue

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (117 commits)
  mm, page_alloc: restore the original nodemask if the fast path allocation failed
  mm, page_alloc: uninline the bad page part of check_new_page()
  mm, page_alloc: don't duplicate code in free_pcp_prepare
  mm, page_alloc: defer debugging checks of pages allocated from the PCP
  mm, page_alloc: defer debugging checks of freed pages until a PCP drain
  cpuset: use static key better and convert to new API
  mm, page_alloc: inline pageblock lookup in page free fast paths
  mm, page_alloc: remove unnecessary variable from free_pcppages_bulk
  mm, page_alloc: pull out side effects from free_pages_check
  mm, page_alloc: un-inline the bad part of free_pages_check
  mm, page_alloc: check multiple page fields with a single branch
  mm, page_alloc: remove field from alloc_context
  mm, page_alloc: avoid looking up the first zone in a zonelist twice
  mm, page_alloc: shortcut watermark checks for order-0 pages
  mm, page_alloc: reduce cost of fair zone allocation policy retry
  mm, page_alloc: shorten the page allocator fast path
  mm, page_alloc: check once if a zone has isolated pageblocks
  mm, page_alloc: move __GFP_HARDWALL modifications out of the fastpath
  mm, page_alloc: simplify last cpupid reset
  mm, page_alloc: remove unnecessary initialisation from __alloc_pages_nodemask()
  ...
2016-05-19 20:00:06 -07:00