renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 04:34:11 +08:00
Code
547,227 Commits 41 Branches 2 Tags 3.4 GiB
8c3ad9cb73
Commit Graph

107 Commits

Author SHA1 Message Date
David Howells
4a47132ff4 FS-Cache: Retain the netfs context in the retrieval op earlier 
Now that the retrieval operation may be disposed of by fscache_put_operation()
before we actually set the context, the retrieval-specific cleanup operation
can produce a NULL-pointer dereference when it tries to unconditionally clean
up the netfs context.

Given that it is expected that we'll get at least as far as the place where we
currently set the context pointer and it is unlikely we'll go through the
error handling paths prior to that point, retain the context right from the
point that the retrieval op is allocated.

Concomitant to this, we need to retain the cookie pointer in the retrieval op
also so that we can call the netfs to release its context in the release
method.

In addition, we might now get into fscache_release_retrieval_op() with the op
only initialised.  To this end, set the operation to DEAD only after the
release method has been called and skip the n_pages test upon cleanup if the
op is still in the INITIALISED state.

Without these changes, the following oops might be seen:

	BUG: unable to handle kernel NULL pointer dereference at 00000000000000b8
	...
	RIP: 0010:[<ffffffffa0089c98>] fscache_release_retrieval_op+0xae/0x100
	...
	Call Trace:
	 [<ffffffffa0088560>] fscache_put_operation+0x117/0x2e0
	 [<ffffffffa008b8f5>] __fscache_read_or_alloc_pages+0x351/0x3ac
	 [<ffffffffa00b761f>] __nfs_readpages_from_fscache+0x59/0xbf [nfs]
	 [<ffffffffa00b06c5>] nfs_readpages+0x10c/0x185 [nfs]
	 [<ffffffff81124925>] ? alloc_pages_current+0x119/0x13e
	 [<ffffffff810ee5fd>] ? __page_cache_alloc+0xfb/0x10a
	 [<ffffffff810f87f8>] __do_page_cache_readahead+0x188/0x22c
	 [<ffffffff810f8b3a>] ondemand_readahead+0x29e/0x2af
	 [<ffffffff810f8c92>] page_cache_sync_readahead+0x38/0x3a
	 [<ffffffff810ef337>] generic_file_read_iter+0x1a2/0x55a
	 [<ffffffffa00a9dff>] ? nfs_revalidate_mapping+0xd6/0x288 [nfs]
	 [<ffffffffa00a6a23>] nfs_file_read+0x49/0x70 [nfs]
	 [<ffffffff811363be>] new_sync_read+0x78/0x9c
	 [<ffffffff81137164>] __vfs_read+0x13/0x38
	 [<ffffffff8113721e>] vfs_read+0x95/0x121
	 [<ffffffff811372f6>] SyS_read+0x4c/0x8a
	 [<ffffffff81557a52>] system_call_fastpath+0x12/0x17

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steve Dickson <steved@redhat.com>
Acked-by: Jeff Layton <jeff.layton@primarydata.com>
 2015-04-02 14:28:53 +01:00
David Howells
d3b97ca4a9 FS-Cache: The operation cancellation method needs calling in more places 
Any time an incomplete operation is cancelled, the operation cancellation
function needs to be called to clean up.  This is currently being passed
directly to some of the functions that might want to call it, but not all.

Instead, pass the cancellation method pointer to the fscache_operation_init()
and have that cache it in the operation struct.  Further, plug in a dummy
cancellation handler if the caller declines to set one as this allows us to
call the function unconditionally (the extra overhead isn't worth bothering
about as we don't expect to be calling this typically).

The cancellation method must thence be called everywhere the CANCELLED state
is set.  Note that we call it *before* setting the CANCELLED state such that
the method can use the old state value to guide its operation.

fscache_do_cancel_retrieval() needs moving higher up in the sources so that
the init function can use it now.

Without this, the following oops may be seen:

	FS-Cache: Assertion failed
	FS-Cache: 3 == 0 is false
	------------[ cut here ]------------
	kernel BUG at ../fs/fscache/page.c:261!
	...
	RIP: 0010:[<ffffffffa0089c1b>]  fscache_release_retrieval_op+0x77/0x100
	 [<ffffffffa008853d>] fscache_put_operation+0x114/0x2da
	 [<ffffffffa008b8c2>] __fscache_read_or_alloc_pages+0x358/0x3b3
	 [<ffffffffa00b761f>] __nfs_readpages_from_fscache+0x59/0xbf [nfs]
	 [<ffffffffa00b06c5>] nfs_readpages+0x10c/0x185 [nfs]
	 [<ffffffff81124925>] ? alloc_pages_current+0x119/0x13e
	 [<ffffffff810ee5fd>] ? __page_cache_alloc+0xfb/0x10a
	 [<ffffffff810f87f8>] __do_page_cache_readahead+0x188/0x22c
	 [<ffffffff810f8b3a>] ondemand_readahead+0x29e/0x2af
	 [<ffffffff810f8c92>] page_cache_sync_readahead+0x38/0x3a
	 [<ffffffff810ef337>] generic_file_read_iter+0x1a2/0x55a
	 [<ffffffffa00a9dff>] ? nfs_revalidate_mapping+0xd6/0x288 [nfs]
	 [<ffffffffa00a6a23>] nfs_file_read+0x49/0x70 [nfs]
	 [<ffffffff811363be>] new_sync_read+0x78/0x9c
	 [<ffffffff81137164>] __vfs_read+0x13/0x38
	 [<ffffffff8113721e>] vfs_read+0x95/0x121
	 [<ffffffff811372f6>] SyS_read+0x4c/0x8a
	 [<ffffffff81557a52>] system_call_fastpath+0x12/0x17

The assertion is showing that the remaining number of pages (n_pages) is not 0
when the operation is being released.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steve Dickson <steved@redhat.com>
Acked-by: Jeff Layton <jeff.layton@primarydata.com>
 2015-04-02 14:28:53 +01:00
David Howells
a39caadf06 FS-Cache: Put an aborted initialised op so that it is accounted correctly 
Call fscache_put_operation() or a wrapper on any op that has gone through
fscache_operation_init() so that the accounting shown in /proc is done
correctly, specifically fscache_n_op_release.

fscache_put_operation() therefore now allows an op in the INITIALISED state as
well as in the CANCELLED and COMPLETE states.

Note that this means that an operation can get put that doesn't have its
->object pointer filled in, so anything that depends on the object needs to be
conditional in fscache_put_operation().

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steve Dickson <steved@redhat.com>
Acked-by: Jeff Layton <jeff.layton@primarydata.com>
 2015-04-02 14:28:53 +01:00
David Howells
73c04a47bf FS-Cache: Fix cancellation of in-progress operation 
Cancellation of an in-progress operation needs to update the relevant counters
and start any operations that are pending waiting on this one.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steve Dickson <steved@redhat.com>
Acked-by: Jeff Layton <jeff.layton@primarydata.com>
 2015-04-02 14:28:53 +01:00
David Howells
03cdd0e4b9 FS-Cache: Count the number of initialised operations 
Count and display through /proc/fs/fscache/stats the number of initialised
operations.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steve Dickson <steved@redhat.com>
Acked-by: Jeff Layton <jeff.layton@primarydata.com>
 2015-04-02 14:28:53 +01:00
David Howells
1339ec98e3 FS-Cache: Out of line fscache_operation_init() 
Out of line fscache_operation_init() so that it can access internal FS-Cache
features, such as stats, in a later commit.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steve Dickson <steved@redhat.com>
Acked-by: Jeff Layton <jeff.layton@primarydata.com>
 2015-04-02 14:28:53 +01:00
David Howells
418b7eb9e1 FS-Cache: Permit fscache_cancel_op() to cancel in-progress operations too 
Currently, fscache_cancel_op() only cancels pending operations - attempts to
cancel in-progress operations are ignored.  This leads to a problem in
fscache_wait_for_operation_activation() whereby the wait is terminated, but
the object has been killed.

The check at the end of the function now triggers because it's no longer
contingent on the cache having produced an I/O error since the commit that
fixed the logic error in fscache_object_is_dead().

The result of the check is that it tries to cancel the operation - but since
the object may not be pending by this point, the cancellation request may be
ignored - with the result that the the object is just put by the caller and
fscache_put_operation has an assertion failure because the operation isn't in
either the COMPLETE or the CANCELLED states.

To fix this, we permit in-progress ops to be cancelled under some
circumstances.

The bug results in an oops that looks something like this:

	FS-Cache: fscache_wait_for_operation_activation() = -ENOBUFS [obj dead 3]
	FS-Cache:
	FS-Cache: Assertion failed
	FS-Cache: 3 == 5 is false
	------------[ cut here ]------------
	kernel BUG at ../fs/fscache/operation.c:432!
	...
	RIP: 0010:[<ffffffffa0088574>] fscache_put_operation+0xf2/0x2cd
	Call Trace:
	 [<ffffffffa008b92a>] __fscache_read_or_alloc_pages+0x2ec/0x3b3
	 [<ffffffffa00b761f>] __nfs_readpages_from_fscache+0x59/0xbf [nfs]
	 [<ffffffffa00b06c5>] nfs_readpages+0x10c/0x185 [nfs]
	 [<ffffffff81124925>] ? alloc_pages_current+0x119/0x13e
	 [<ffffffff810ee5fd>] ? __page_cache_alloc+0xfb/0x10a
	 [<ffffffff810f87f8>] __do_page_cache_readahead+0x188/0x22c
	 [<ffffffff810f8b3a>] ondemand_readahead+0x29e/0x2af
	 [<ffffffff810f8c92>] page_cache_sync_readahead+0x38/0x3a
	 [<ffffffff810ef337>] generic_file_read_iter+0x1a2/0x55a
	 [<ffffffffa00a9dff>] ? nfs_revalidate_mapping+0xd6/0x288 [nfs]
	 [<ffffffffa00a6a23>] nfs_file_read+0x49/0x70 [nfs]
	 [<ffffffff811363be>] new_sync_read+0x78/0x9c
	 [<ffffffff81137164>] __vfs_read+0x13/0x38
	 [<ffffffff8113721e>] vfs_read+0x95/0x121
	 [<ffffffff811372f6>] SyS_read+0x4c/0x8a
	 [<ffffffff81557a52>] system_call_fastpath+0x12/0x17

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steve Dickson <steved@redhat.com>
Acked-by: Jeff Layton <jeff.layton@primarydata.com>
 2015-04-02 14:28:53 +01:00
David Howells
8702152630 FS-Cache: fscache_object_is_dead() has wrong logic, kill it 
fscache_object_is_dead() returns true only if the object is marked dead and
the cache got an I/O error.  This should be a logical OR instead.  Since two
of the callers got split up into handling for separate subcases, expand the
other callers and kill the function.  This is probably the right thing to do
anyway since one of the subcases isn't about the object at all, but rather
about the cache.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steve Dickson <steved@redhat.com>
Acked-by: Jeff Layton <jeff.layton@primarydata.com>
 2015-04-02 14:28:53 +01:00
David Howells
f09b443d0e FS-Cache: Synchronise object death state change vs operation submission 
When an object is being marked as no longer live, do this under the object
spinlock to prevent a race with operation submission targeted on that object.

The problem occurs due to the following pair of intertwined sequences when the
cache tries to create an object that would take it over the hard available
space limit:

 NETFS INTERFACE
 ===============
 (A) The netfs calls fscache_acquire_cookie().  object creation is deferred to
     the object state machine and the netfs is allowed to continue.

	OBJECT STATE MACHINE KTHREAD
	============================
	(1) The object is looked up on disk by fscache_look_up_object()
	    calling cachefiles_walk_to_object().  The latter finds that the
	    object is not yet represented on disk and calls
	    fscache_object_lookup_negative().

	(2) fscache_object_lookup_negative() sets FSCACHE_COOKIE_NO_DATA_YET
	    and clears FSCACHE_COOKIE_LOOKING_UP, thus allowing the netfs to
	    start queuing read operations.

 (B) The netfs calls fscache_read_or_alloc_pages().  This calls
     fscache_wait_for_deferred_lookup() which sees FSCACHE_COOKIE_LOOKING_UP
     become clear, allowing the read to begin.

 (C) A read operation is set up and passed to fscache_submit_op() to deal
     with.

	(3) cachefiles_walk_to_object() calls cachefiles_has_space(), which
	    fails (or one of the file operations to create stuff fails).
	    cachefiles returns an error to fscache.

	(4) fscache_look_up_object() transits to the LOOKUP_FAILURE state,

	(5) fscache_lookup_failure() sets FSCACHE_OBJECT_LOOKED_UP and
	    FSCACHE_COOKIE_UNAVAILABLE and clears FSCACHE_COOKIE_LOOKING_UP
	    then transits to the KILL_OBJECT state.

	(6) fscache_kill_object() clears FSCACHE_OBJECT_IS_LIVE in an attempt
	    to reject any further requests from the netfs.

	(7) object->n_ops is examined and found to be 0.
	    fscache_kill_object() transits to the DROP_OBJECT state.

 (D) fscache_submit_op() locks the object spinlock, sees if it can dispatch
     the op immediately by calling fscache_object_is_active() - which fails
     since FSCACHE_OBJECT_IS_AVAILABLE has not yet been set.

 (E) fscache_submit_op() then tests FSCACHE_OBJECT_LOOKED_UP - which is set.
     It then queues the object and increments object->n_ops.

	(8) fscache_drop_object() releases the object and eventually
	    fscache_put_object() calls cachefiles_put_object() which suffers
	    an assertion failure here:

		ASSERTCMP(object->fscache.n_ops, ==, 0);

Locking the object spinlock in step (6) around the clearance of
FSCACHE_OBJECT_IS_LIVE ensures that the the decision trees in
fscache_submit_op() and fscache_submit_exclusive_op() don't see the IS_LIVE
flag being cleared mid-decision: either the op is queued before step (7) - in
which case fscache_kill_object() will see n_ops>0 and will deal with the op -
or the op will be rejected.

This, combined with rejecting op submission if the target object is dying, fix
the problem.

The problem shows up as the following oops:

CacheFiles: Assertion failed
CacheFiles: 1 == 0 is false
------------[ cut here ]------------
kernel BUG at ../fs/cachefiles/interface.c:339!
...
RIP: 0010:[<ffffffffa014fd9c>]  [<ffffffffa014fd9c>] cachefiles_put_object+0x2a4/0x301 [cachefiles]
...
Call Trace:
 [<ffffffffa008674b>] fscache_put_object+0x18/0x21 [fscache]
 [<ffffffffa00883e6>] fscache_object_work_func+0x3ba/0x3c9 [fscache]
 [<ffffffff81054dad>] process_one_work+0x226/0x441
 [<ffffffff81055d91>] worker_thread+0x273/0x36b
 [<ffffffff81055b1e>] ? rescuer_thread+0x2e1/0x2e1
 [<ffffffff81059b9d>] kthread+0x10e/0x116
 [<ffffffff81059a8f>] ? kthread_create_on_node+0x1bb/0x1bb
 [<ffffffff815579ac>] ret_from_fork+0x7c/0xb0
 [<ffffffff81059a8f>] ? kthread_create_on_node+0x1bb/0x1bb

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steve Dickson <steved@redhat.com>
Acked-by: Jeff Layton <jeff.layton@primarydata.com>
 2015-04-02 14:28:53 +01:00
David Howells
6515d1dbf4 FS-Cache: Handle a new operation submitted against a killed object 
Reject new operations that are being submitted against an object if that
object has failed its lookup or creation states or has been killed by the
cache backend for some other reason, such as having been culled.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steve Dickson <steved@redhat.com>
Acked-by: Jeff Layton <jeff.layton@primarydata.com>
 2015-04-02 14:28:53 +01:00
David Howells
30ceec6284 FS-Cache: When submitting an op, cancel it if the target object is dying 
When submitting an operation, prefer to cancel the operation immediately
rather than queuing it for later processing if the object is marked as dying
(ie. the object state machine has reached the KILL_OBJECT state).

Whilst we're at it, change the series of related test_bit() calls into a
READ_ONCE() and bitwise-AND operators to reduce the number of load
instructions (test_bit() has a volatile address).

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steve Dickson <steved@redhat.com>
Acked-by: Jeff Layton <jeff.layton@primarydata.com>
 2015-04-02 14:28:53 +01:00
David Howells
3c3059841a FS-Cache: Move fscache_report_unexpected_submission() to make it more available 
Move fscache_report_unexpected_submission() up within operation.c so that it
can be called from fscache_submit_exclusive_op() too.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steve Dickson <steved@redhat.com>
Acked-by: Jeff Layton <jeff.layton@primarydata.com>
 2015-04-02 14:28:53 +01:00
David Howells
182d919b84 FS-Cache: Count culled objects and objects rejected due to lack of space 
Count the number of objects that get culled by the cache backend and the
number of objects that the cache backend declines to instantiate due to lack
of space in the cache.

These numbers are made available through /proc/fs/fscache/stats

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steve Dickson <steved@redhat.com>
Acked-by: Jeff Layton <jeff.layton@primarydata.com>
 2015-02-24 10:05:27 +00:00
Rob Jones
d5d962265d fs/fscache/object-list.c: use __seq_open_private() 
Reduce boilerplate code by using __seq_open_private() instead of seq_open()
in fscache_objlist_open().

Signed-off-by: Rob Jones <rob.jones@codethink.co.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
 2014-10-13 17:52:21 +01:00
Milosz Tanski
3e1199dcad FS-Cache: refcount becomes corrupt under vma pressure. 
In rare cases under heavy VMA pressure the ref count for a fscache cookie
becomes corrupt. In this case we decrement ref count even if we fail before
incrementing the refcount.

FS-Cache: Assertion failed bnode-eca5f9c6/syslog
0 > 0 is false
------------[ cut here ]------------
kernel BUG at fs/fscache/cookie.c:519!
invalid opcode: 0000 [#1] SMP
Call Trace:
[<ffffffffa01ba060>] __fscache_relinquish_cookie+0x50/0x220 [fscache]
[<ffffffffa02d64ce>] ceph_fscache_unregister_inode_cookie+0x3e/0x50 [ceph]
[<ffffffffa02ae1d3>] ceph_destroy_inode+0x33/0x200 [ceph]
[<ffffffff811cf67e>] ? __fsnotify_inode_delete+0xe/0x10
[<ffffffff811a9e0c>] destroy_inode+0x3c/0x70
[<ffffffff811a9f51>] evict+0x111/0x180
[<ffffffff811aa763>] iput+0x103/0x190
[<ffffffff811a5de8>] __dentry_kill+0x1c8/0x220
[<ffffffff811a5f31>] shrink_dentry_list+0xf1/0x250
[<ffffffff811a762c>] prune_dcache_sb+0x4c/0x60
[<ffffffff811930af>] super_cache_scan+0xff/0x170
[<ffffffff8113d7a0>] shrink_slab_node+0x140/0x2c0
[<ffffffff8113f2da>] shrink_slab+0x8a/0x130
[<ffffffff81142572>] balance_pgdat+0x3e2/0x5d0
[<ffffffff811428ca>] kswapd+0x16a/0x4a0
[<ffffffff810a43f0>] ? __wake_up_sync+0x20/0x20
[<ffffffff81142760>] ? balance_pgdat+0x5d0/0x5d0
[<ffffffff81083e09>] kthread+0xc9/0xe0
[<ffffffff81010000>] ? ftrace_raw_event_xen_mmu_release_ptpage+0x70/0x90
[<ffffffff81083d40>] ? flush_kthread_worker+0xb0/0xb0
[<ffffffff8159f63c>] ret_from_fork+0x7c/0xb0
[<ffffffff81083d40>] ? flush_kthread_worker+0xb0/0xb0
RIP [<ffffffffa01b984b>] __fscache_disable_cookie+0x1db/0x210 [fscache]
RSP <ffff8803bc85f9b8>
---[ end trace 254d0d7c74a01f25 ]---

Signed-off-by: Milosz Tanski <milosz@adfin.com>
Signed-off-by: David Howells <dhowells@redhat.com>
 2014-09-17 22:41:40 +01:00
Milosz Tanski
920bce20d7 FS-Cache: Reduce cookie ref count if submit fails. 
I've been seeing issues with disposing cookies under vma pressure. The symptom
is that the refcount gets out of sync. In this case we fail to decrement the
refcount if submit fails. I found this while auditing the error in and around
cookie operations.

Signed-off-by: Milosz Tanski <milosz@adfin.com>
Signed-off-by: David Howells <dhowells@redhat.com>
 2014-08-27 15:29:34 +01:00
Milosz Tanski
9776de96e5 FS-Cache: Timeout for releasepage() 
This is meant to avoid a recusive hang caused by underlying filesystem trying
to grab a free page and causing a write-out.

INFO: task kworker/u30:7:28375 blocked for more than 120 seconds.
      Not tainted 3.15.0-virtual #74
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kworker/u30:7   D 0000000000000000     0 28375      2 0x00000000
Workqueue: fscache_operation fscache_op_work_func [fscache]
 ffff88000b147148 0000000000000046 0000000000000000 ffff88000b1471c8
 ffff8807aa031820 0000000000014040 ffff88000b147fd8 0000000000014040
 ffff880f0c50c860 ffff8807aa031820 ffff88000b147158 ffff88007be59cd0
Call Trace:
 [<ffffffff815930e9>] schedule+0x29/0x70
 [<ffffffffa018bed5>] __fscache_wait_on_page_write+0x55/0x90 [fscache]
 [<ffffffff810a4350>] ? __wake_up_sync+0x20/0x20
 [<ffffffffa018c135>] __fscache_maybe_release_page+0x65/0x1e0 [fscache]
 [<ffffffffa02ad813>] ceph_releasepage+0x83/0x100 [ceph]
 [<ffffffff811635b0>] ? anon_vma_fork+0x130/0x130
 [<ffffffff8112cdd2>] try_to_release_page+0x32/0x50
 [<ffffffff81140096>] shrink_page_list+0x7e6/0x9d0
 [<ffffffff8113f278>] ? isolate_lru_pages.isra.73+0x78/0x1e0
 [<ffffffff81140932>] shrink_inactive_list+0x252/0x4c0
 [<ffffffff811412b1>] shrink_lruvec+0x3e1/0x670
 [<ffffffff8114157f>] shrink_zone+0x3f/0x110
 [<ffffffff81141b06>] do_try_to_free_pages+0x1d6/0x450
 [<ffffffff8114a939>] ? zone_statistics+0x99/0xc0
 [<ffffffff81141e44>] try_to_free_pages+0xc4/0x180
 [<ffffffff81136982>] __alloc_pages_nodemask+0x6b2/0xa60
 [<ffffffff811c1d4e>] ? __find_get_block+0xbe/0x250
 [<ffffffff810a405e>] ? wake_up_bit+0x2e/0x40
 [<ffffffff811740c3>] alloc_pages_current+0xb3/0x180
 [<ffffffff8112cf07>] __page_cache_alloc+0xb7/0xd0
 [<ffffffff8112da6c>] grab_cache_page_write_begin+0x7c/0xe0
 [<ffffffff81214072>] ? ext4_mark_inode_dirty+0x82/0x220
 [<ffffffff81214a89>] ext4_da_write_begin+0x89/0x2d0
 [<ffffffff8112c6ee>] generic_perform_write+0xbe/0x1d0
 [<ffffffff811a96b1>] ? update_time+0x81/0xc0
 [<ffffffff811ad4c2>] ? mnt_clone_write+0x12/0x30
 [<ffffffff8112e80e>] __generic_file_aio_write+0x1ce/0x3f0
 [<ffffffff8112ea8e>] generic_file_aio_write+0x5e/0xe0
 [<ffffffff8120b94f>] ext4_file_write+0x9f/0x410
 [<ffffffff8120af56>] ? ext4_file_open+0x66/0x180
 [<ffffffff8118f0da>] do_sync_write+0x5a/0x90
 [<ffffffffa025c6c9>] cachefiles_write_page+0x149/0x430 [cachefiles]
 [<ffffffff812cf439>] ? radix_tree_gang_lookup_tag+0x89/0xd0
 [<ffffffffa018c512>] fscache_write_op+0x222/0x3b0 [fscache]
 [<ffffffffa018b35a>] fscache_op_work_func+0x3a/0x100 [fscache]
 [<ffffffff8107bfe9>] process_one_work+0x179/0x4a0
 [<ffffffff8107d47b>] worker_thread+0x11b/0x370
 [<ffffffff8107d360>] ? manage_workers.isra.21+0x2e0/0x2e0
 [<ffffffff81083d69>] kthread+0xc9/0xe0
 [<ffffffff81010000>] ? ftrace_raw_event_xen_mmu_release_ptpage+0x70/0x90
 [<ffffffff81083ca0>] ? flush_kthread_worker+0xb0/0xb0
 [<ffffffff8159eefc>] ret_from_fork+0x7c/0xb0
 [<ffffffff81083ca0>] ? flush_kthread_worker+0xb0/0xb0

Signed-off-by: Milosz Tanski <milosz@adfin.com>
Signed-off-by: David Howells <dhowells@redhat.com>
 2014-08-27 15:24:06 +01:00
Fabian Frederick
3e58406484 fs/fscache: make ctl_table static 
fscache_sysctls and fscache_sysctls_root are only used in main.c

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: David Howells <dhowells@redhat.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2014-08-06 18:01:12 -07:00
NeilBrown
743162013d sched: Remove proliferation of wait_on_bit() action functions 
The current "wait_on_bit" interface requires an 'action'
function to be provided which does the actual waiting.
There are over 20 such functions, many of them identical.
Most cases can be satisfied by one of just two functions, one
which uses io_schedule() and one which just uses schedule().

So:
 Rename wait_on_bit and        wait_on_bit_lock to
        wait_on_bit_action and wait_on_bit_lock_action
 to make it explicit that they need an action function.

 Introduce new wait_on_bit{,_lock} and wait_on_bit{,_lock}_io
 which are *not* given an action function but implicitly use
 a standard one.
 The decision to error-out if a signal is pending is now made
 based on the 'mode' argument rather than being encoded in the action
 function.

 All instances of the old wait_on_bit and wait_on_bit_lock which
 can use the new version have been changed accordingly and their
 action functions have been discarded.
 wait_on_bit{_lock} does not return any specific error code in the
 event of a signal so the caller must check for non-zero and
 interpolate their own error code as appropriate.

The wait_on_bit() call in __fscache_wait_on_invalidate() was
ambiguous as it specified TASK_UNINTERRUPTIBLE but used
fscache_wait_bit_interruptible as an action function.
David Howells confirms this should be uniformly
"uninterruptible"

The main remaining user of wait_on_bit{,_lock}_action is NFS
which needs to use a freezer-aware schedule() call.

A comment in fs/gfs2/glock.c notes that having multiple 'action'
functions is useful as they display differently in the 'wchan'
field of 'ps'. (and /proc/$PID/wchan).
As the new bit_wait{,_io} functions are tagged "__sched", they
will not show up at all, but something higher in the stack.  So
the distinction will still be visible, only with different
function names (gds2_glock_wait versus gfs2_glock_dq_wait in the
gfs2/glock.c case).

Since first version of this patch (against 3.15) two new action
functions appeared, on in NFS and one in CIFS.  CIFS also now
uses an action function that makes the same freezer aware
schedule call as NFS.

Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: David Howells <dhowells@redhat.com> (fscache, keys)
Acked-by: Steven Whitehouse <swhiteho@redhat.com> (gfs2)
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steve French <sfrench@samba.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20140707051603.28027.72349.stgit@notabene.brown
Signed-off-by: Ingo Molnar <mingo@kernel.org>
 2014-07-16 15:10:39 +02:00
Joe Perches
75a3294ec5 fscache: convert use of typedef ctl_table to struct ctl_table 
This typedef is unnecessary and should just be removed.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2014-06-06 16:08:16 -07:00
Fabian Frederick
3185a88ce3 fs/fscache: replace seq_printf by seq_puts 
Replace seq_printf where possible + coalesce formats from 2 existing
seq_puts

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2014-06-04 16:53:52 -07:00
Fabian Frederick
36dfd116ed fs/fscache: convert printk to pr_foo() 
All printk converted to pr_foo() except internal.h: printk(KERN_DEBUG

Coalesce formats.

Add pr_fmt

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2014-06-04 16:53:51 -07:00
David Howells
7026f1929e FS-Cache: Handle removal of unadded object to the fscache_object_list rb tree 
When FS-Cache allocates an object, the following sequence of events can
occur:

 -->fscache_alloc_object()
    -->cachefiles_alloc_object() [via cache->ops->alloc_object]
    <--[returns new object]
    -->fscache_attach_object()
    <--[failed]
    -->cachefiles_put_object() [via cache->ops->put_object]
       -->fscache_object_destroy()
          -->fscache_objlist_remove()
             -->rb_erase() to remove the object from fscache_object_list.

resulting in a crash in the rbtree code.

The problem is that the object is only added to fscache_object_list on
the success path of fscache_attach_object() where it calls
fscache_objlist_add().

So if fscache_attach_object() fails, the object won't have been added to
the objlist rbtree.  We do, however, unconditionally try to remove the
object from the tree.

Thanks to NeilBrown for finding this and suggesting this solution.

Reported-by: NeilBrown <neilb@suse.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: (a customer of) NeilBrown <neilb@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2014-02-17 13:47:35 -08:00
Linus Torvalds
0910c0bdf7 Merge branch 'for-3.13/core' of git://git.kernel.dk/linux-block 
Pull block IO core updates from Jens Axboe:
 "This is the pull request for the core changes in the block layer for
  3.13.  It contains:

   - The new blk-mq request interface.

     This is a new and more scalable queueing model that marries the
     best part of the request based interface we currently have (which
     is fully featured, but scales poorly) and the bio based "interface"
     which the new drivers for high IOPS devices end up using because
     it's much faster than the request based one.

     The bio interface has no block layer support, since it taps into
     the stack much earlier.  This means that drivers end up having to
     implement a lot of functionality on their own, like tagging,
     timeout handling, requeue, etc.  The blk-mq interface provides all
     these.  Some drivers even provide a switch to select bio or rq and
     has code to handle both, since things like merging only works in
     the rq model and hence is faster for some workloads.  This is a
     huge mess.  Conversion of these drivers nets us a substantial code
     reduction.  Initial results on converting SCSI to this model even
     shows an 8x improvement on single queue devices.  So while the
     model was intended to work on the newer multiqueue devices, it has
     substantial improvements for "classic" hardware as well.  This code
     has gone through extensive testing and development, it's now ready
     to go.  A pull request is coming to convert virtio-blk to this
     model will be will be coming as well, with more drivers scheduled
     for 3.14 conversion.

   - Two blktrace fixes from Jan and Chen Gang.

   - A plug merge fix from Alireza Haghdoost.

   - Conversion of __get_cpu_var() from Christoph Lameter.

   - Fix for sector_div() with 64-bit divider from Geert Uytterhoeven.

   - A fix for a race between request completion and the timeout
     handling from Jeff Moyer.  This is what caused the merge conflict
     with blk-mq/core, in case you are looking at that.

   - A dm stacking fix from Mike Snitzer.

   - A code consolidation fix and duplicated code removal from Kent
     Overstreet.

   - A handful of block bug fixes from Mikulas Patocka, fixing a loop
     crash and memory corruption on blk cg.

   - Elevator switch bug fix from Tomoki Sekiyama.

  A heads-up that I had to rebase this branch.  Initially the immutable
  bio_vecs had been queued up for inclusion, but a week later, it became
  clear that it wasn't fully cooked yet.  So the decision was made to
  pull this out and postpone it until 3.14.  It was a straight forward
  rebase, just pruning out the immutable series and the later fixes of
  problems with it.  The rest of the patches applied directly and no
  further changes were made"

* 'for-3.13/core' of git://git.kernel.dk/linux-block: (31 commits)
  block: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO
  block: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO
  block: Do not call sector_div() with a 64-bit divisor
  kernel: trace: blktrace: remove redundent memcpy() in compat_blk_trace_setup()
  block: Consolidate duplicated bio_trim() implementations
  block: Use rw_copy_check_uvector()
  block: Enable sysfs nomerge control for I/O requests in the plug list
  block: properly stack underlying max_segment_size to DM device
  elevator: acquire q->sysfs_lock in elevator_change()
  elevator: Fix a race in elevator switching and md device initialization
  block: Replace __get_cpu_var uses
  bdi: test bdi_init failure
  block: fix a probe argument to blk_register_region
  loop: fix crash if blk_alloc_queue fails
  blk-core: Fix memory corruption if blkcg_init_queue fails
  block: fix race between request completion and timeout handling
  blktrace: Send BLK_TN_PROCESS events to all running traces
  blk-mq: don't disallow request merges for req->special being set
  blk-mq: mq plug list breakage
  blk-mq: fix for flush deadlock
  ...
 2013-11-14 12:08:14 +09:00
Christoph Lameter
170d800af8 block: Replace __get_cpu_var uses 
__get_cpu_var() is used for multiple purposes in the kernel source. One of
them is address calculation via the form &__get_cpu_var(x).  This calculates
the address for the instance of the percpu variable of the current processor
based on an offset.

Other use cases are for storing and retrieving data from the current
processors percpu area.  __get_cpu_var() can be used as an lvalue when
writing data or on the right side of an assignment.

__get_cpu_var() is defined as :

#define __get_cpu_var(var) (*this_cpu_ptr(&(var)))

__get_cpu_var() always only does an address determination. However, store
and retrieve operations could use a segment prefix (or global register on
other platforms) to avoid the address calculation.

this_cpu_write() and this_cpu_read() can directly take an offset into a
percpu area and use optimized assembly code to read and write per cpu
variables.

This patch converts __get_cpu_var into either an explicit address
calculation using this_cpu_ptr() or into a use of this_cpu operations that
use the offset.  Thereby address calculations are avoided and less registers
are used when code is generated.

At the end of the patch set all uses of __get_cpu_var have been removed so
the macro is removed too.

The patch set includes passes over all arches as well. Once these operations
are used throughout then specialized macros can be defined in non -x86
arches as well in order to optimize per cpu access by f.e.  using a global
register that may be set to the per cpu base.

Transformations done to __get_cpu_var()

1. Determine the address of the percpu instance of the current processor.

	DEFINE_PER_CPU(int, y);
	int *x = &__get_cpu_var(y);

    Converts to

	int *x = this_cpu_ptr(&y);

2. Same as #1 but this time an array structure is involved.

	DEFINE_PER_CPU(int, y[20]);
	int *x = __get_cpu_var(y);

    Converts to

	int *x = this_cpu_ptr(y);

3. Retrieve the content of the current processors instance of a per cpu
variable.

	DEFINE_PER_CPU(int, y);
	int x = __get_cpu_var(y)

   Converts to

	int x = __this_cpu_read(y);

4. Retrieve the content of a percpu struct

	DEFINE_PER_CPU(struct mystruct, y);
	struct mystruct x = __get_cpu_var(y);

   Converts to

	memcpy(&x, this_cpu_ptr(&y), sizeof(x));

5. Assignment to a per cpu variable

	DEFINE_PER_CPU(int, y)
	__get_cpu_var(y) = x;

   Converts to

	this_cpu_write(y, x);

6. Increment/Decrement etc of a per cpu variable

	DEFINE_PER_CPU(int, y);
	__get_cpu_var(y)++

   Converts to

	this_cpu_inc(y)

Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
 2013-11-08 08:59:58 -07:00
David Howells
94d30ae90a FS-Cache: Provide the ability to enable/disable cookies 
Provide the ability to enable and disable fscache cookies.  A disabled cookie
will reject or ignore further requests to:

	Acquire a child cookie
	Invalidate and update backing objects
	Check the consistency of a backing object
	Allocate storage for backing page
	Read backing pages
	Write to backing pages

but still allows:

	Checks/waits on the completion of already in-progress objects
	Uncaching of pages
	Relinquishment of cookies

Two new operations are provided:

 (1) Disable a cookie:

	void fscache_disable_cookie(struct fscache_cookie *cookie,
				    bool invalidate);

     If the cookie is not already disabled, this locks the cookie against other
     dis/enablement ops, marks the cookie as being disabled, discards or
     invalidates any backing objects and waits for cessation of activity on any
     associated object.

     This is a wrapper around a chunk split out of fscache_relinquish_cookie(),
     but it reinitialises the cookie such that it can be reenabled.

     All possible failures are handled internally.  The caller should consider
     calling fscache_uncache_all_inode_pages() afterwards to make sure all page
     markings are cleared up.

 (2) Enable a cookie:

	void fscache_enable_cookie(struct fscache_cookie *cookie,
				   bool (*can_enable)(void *data),
				   void *data)

     If the cookie is not already enabled, this locks the cookie against other
     dis/enablement ops, invokes can_enable() and, if the cookie is not an
     index cookie, will begin the procedure of acquiring backing objects.

     The optional can_enable() function is passed the data argument and returns
     a ruling as to whether or not enablement should actually be permitted to
     begin.

     All possible failures are handled internally.  The cookie will only be
     marked as enabled if provisional backing objects are allocated.

A later patch will introduce these to NFS.  Cookie enablement during nfs_open()
is then contingent on i_writecount <= 0.  can_enable() checks for a race
between open(O_RDONLY) and open(O_WRONLY/O_RDWR).  This simplifies NFS's cookie
handling and allows us to get rid of open(O_RDONLY) accidentally introducing
caching to an inode that's open for writing already.

One operation has its API modified:

 (3) Acquire a cookie.

	struct fscache_cookie *fscache_acquire_cookie(
		struct fscache_cookie *parent,
		const struct fscache_cookie_def *def,
		void *netfs_data,
		bool enable);

     This now has an additional argument that indicates whether the requested
     cookie should be enabled by default.  It doesn't need the can_enable()
     function because the caller must prevent multiple calls for the same netfs
     object and it doesn't need to take the enablement lock because no one else
     can get at the cookie before this returns.

Signed-off-by: David Howells <dhowells@redhat.com
 2013-09-27 18:40:25 +01:00
David Howells
8fb883f3e3 FS-Cache: Add use/unuse/wake cookie wrappers 
Add wrapper functions for dealing with cookie->n_active:

 (*) __fscache_use_cookie() to increment it.

 (*) __fscache_unuse_cookie() to decrement and test against zero.

 (*) __fscache_wake_unused_cookie() to wake up anyone waiting for it to reach
     zero.

The second and third are split so that the third can be done after cookie->lock
has been released in case the waiter wakes up whilst we're still holding it and
tries to get it.

We will need to wake-on-zero once the cookie disablement patch is applied
because it will then be possible to see n_active become zero without the cookie
being relinquished.

Also move the cookie usement out of fscache_attr_changed_op() and into
fscache_attr_changed() and the operation struct so that cookie disablement
will be able to track it.

Whilst we're at it, only increment n_active if we're about to do
fscache_submit_op() so that we don't have to deal with undoing it if anything
earlier fails.  Possibly this should be moved into fscache_submit_op() which
could look at FSCACHE_OP_UNUSE_COOKIE.

Signed-off-by: David Howells <dhowells@redhat.com>
 2013-09-27 18:40:25 +01:00
Linus Torvalds
e9ff04dd94 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client 
Pull ceph fixes from Sage Weil:
 "These fix several bugs with RBD from 3.11 that didn't get tested in
  time for the merge window: some error handling, a use-after-free, and
  a sequencing issue when unmapping and image races with a notify
  operation.

  There is also a patch fixing a problem with the new ceph + fscache
  code that just went in"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  fscache: check consistency does not decrement refcount
  rbd: fix error handling from rbd_snap_name()
  rbd: ignore unmapped snapshots that no longer exist
  rbd: fix use-after free of rbd_dev->disk
  rbd: make rbd_obj_notify_ack() synchronous
  rbd: complete notifies before cleaning up osd_client and rbd_dev
  libceph: add function to ensure notifies are complete
 2013-09-19 12:50:37 -05:00
Jan Kara
5e4c0d9741 lib/radix-tree.c: make radix_tree_node_alloc() work correctly within interrupt 
With users of radix_tree_preload() run from interrupt (block/blk-ioc.c is
one such possible user), the following race can happen:

radix_tree_preload()
...
radix_tree_insert()
  radix_tree_node_alloc()
    if (rtp->nr) {
      ret = rtp->nodes[rtp->nr - 1];
<interrupt>
...
radix_tree_preload()
...
radix_tree_insert()
  radix_tree_node_alloc()
    if (rtp->nr) {
      ret = rtp->nodes[rtp->nr - 1];

And we give out one radix tree node twice.  That clearly results in radix
tree corruption with different results (usually OOPS) depending on which
two users of radix tree race.

We fix the problem by making radix_tree_node_alloc() always allocate fresh
radix tree nodes when in interrupt.  Using preloading when in interrupt
doesn't make sense since all the allocations have to be atomic anyway and
we cannot steal nodes from process-context users because some users rely
on radix_tree_insert() succeeding after radix_tree_preload().
in_interrupt() check is somewhat ugly but we cannot simply key off passed
gfp_mask as that is acquired from root_gfp_mask() and thus the same for
all preload users.

Another part of the fix is to avoid node preallocation in
radix_tree_preload() when passed gfp_mask doesn't allow waiting.  Again,
preallocation in such case doesn't make sense and when preallocation would
happen in interrupt we could possibly leak some allocated nodes.  However,
some users of radix_tree_preload() require following radix_tree_insert()
to succeed.  To avoid unexpected effects for these users,
radix_tree_preload() only warns if passed gfp mask doesn't allow waiting
and we provide a new function radix_tree_maybe_preload() for those users
which get different gfp mask from different call sites and which are
prepared to handle radix_tree_insert() failure.

Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-09-11 15:59:36 -07:00
Milosz Tanski
9c89d62948 fscache: check consistency does not decrement refcount 
__fscache_check_consistency() does not decrement the count of operations
active after it finishes in the success case. This leads to a hung tasks on
cookie de-registration (commonly in inode eviction).

INFO: task kworker/1:2:4214 blocked for more than 120 seconds.
kworker/1:2     D ffff880443513fc0     0  4214      2 0x00000000
Workqueue: ceph-msgr con_work [libceph]
  ...
Call Trace:
 [<ffffffff81569fc6>] ? _raw_spin_unlock_irqrestore+0x16/0x20
 [<ffffffffa0016570>] ? fscache_wait_bit_interruptible+0x30/0x30 [fscache]
 [<ffffffff81568d09>] schedule+0x29/0x70
 [<ffffffffa001657e>] fscache_wait_atomic_t+0xe/0x20 [fscache]
 [<ffffffff815665cf>] out_of_line_wait_on_atomic_t+0x9f/0xe0
 [<ffffffff81083560>] ? autoremove_wake_function+0x40/0x40
 [<ffffffffa0015a9c>] __fscache_relinquish_cookie+0x15c/0x310 [fscache]
 [<ffffffffa00a4fae>] ceph_fscache_unregister_inode_cookie+0x3e/0x50 [ceph]
 [<ffffffffa007e373>] ceph_destroy_inode+0x33/0x200 [ceph]
 [<ffffffff811c13ae>] ? __fsnotify_inode_delete+0xe/0x10
 [<ffffffff8119ba1c>] destroy_inode+0x3c/0x70
 [<ffffffff8119bb69>] evict+0x119/0x1b0

Signed-off-by: Milosz Tanski <milosz@adfin.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sage Weil <sage@inktank.com>
 2013-09-10 09:04:46 -07:00
Milosz Tanski
5a6f282a20 fscache: Netfs function for cleanup post readpages 
Currently the fscache code expect the netfs to call fscache_readpages_or_alloc
inside the aops readpages callback.  It marks all the pages in the list
provided by readahead with PG_private_2.  In the cases that the netfs fails to
read all the pages (which is legal) it ends up returning to the readahead and
triggering a BUG.  This happens because the page list still contains marked
pages.

This patch implements a simple fscache_readpages_cancel function that the netfs
should call before returning from readpages.  It will revoke the pages from the
underlying cache backend and unmark them.

The problem was originally worked out in the Ceph devel tree, but it also
occurs in CIFS.  It appears that NFS, AFS and 9P are okay as read_cache_pages()
will clean up the unprocessed pages in the case of an error.

This can be used to address the following oops:

[12410647.597278] BUG: Bad page state in process petabucket  pfn:3d504e
[12410647.597292] page:ffffea000f541380 count:0 mapcount:0 mapping:
	(null) index:0x0
[12410647.597298] page flags: 0x200000000001000(private_2)

...

[12410647.597334] Call Trace:
[12410647.597345]  [<ffffffff815523f2>] dump_stack+0x19/0x1b
[12410647.597356]  [<ffffffff8111def7>] bad_page+0xc7/0x120
[12410647.597359]  [<ffffffff8111e49e>] free_pages_prepare+0x10e/0x120
[12410647.597361]  [<ffffffff8111fc80>] free_hot_cold_page+0x40/0x170
[12410647.597363]  [<ffffffff81123507>] __put_single_page+0x27/0x30
[12410647.597365]  [<ffffffff81123df5>] put_page+0x25/0x40
[12410647.597376]  [<ffffffffa02bdcf9>] ceph_readpages+0x2e9/0x6e0 [ceph]
[12410647.597379]  [<ffffffff81122a8f>] __do_page_cache_readahead+0x1af/0x260
[12410647.597382]  [<ffffffff81122ea1>] ra_submit+0x21/0x30
[12410647.597384]  [<ffffffff81118f64>] filemap_fault+0x254/0x490
[12410647.597387]  [<ffffffff8113a74f>] __do_fault+0x6f/0x4e0
[12410647.597391]  [<ffffffff810125bd>] ? __switch_to+0x16d/0x4a0
[12410647.597395]  [<ffffffff810865ba>] ? finish_task_switch+0x5a/0xc0
[12410647.597398]  [<ffffffff8113d856>] handle_pte_fault+0xf6/0x930
[12410647.597401]  [<ffffffff81008c33>] ? pte_mfn_to_pfn+0x93/0x110
[12410647.597403]  [<ffffffff81008cce>] ? xen_pmd_val+0xe/0x10
[12410647.597405]  [<ffffffff81005469>] ? __raw_callee_save_xen_pmd_val+0x11/0x1e
[12410647.597407]  [<ffffffff8113f361>] handle_mm_fault+0x251/0x370
[12410647.597411]  [<ffffffff812b0ac4>] ? call_rwsem_down_read_failed+0x14/0x30
[12410647.597414]  [<ffffffff8155bffa>] __do_page_fault+0x1aa/0x550
[12410647.597418]  [<ffffffff8108011d>] ? up_write+0x1d/0x20
[12410647.597422]  [<ffffffff8113141c>] ? vm_mmap_pgoff+0xbc/0xe0
[12410647.597425]  [<ffffffff81143bb8>] ? SyS_mmap_pgoff+0xd8/0x240
[12410647.597427]  [<ffffffff8155c3ae>] do_page_fault+0xe/0x10
[12410647.597431]  [<ffffffff81558818>] page_fault+0x28/0x30

Signed-off-by: Milosz Tanski <milosz@adfin.com>
Signed-off-by: David Howells <dhowells@redhat.com>
 2013-09-06 09:17:30 +01:00
David Howells
da9803bc88 FS-Cache: Add interface to check consistency of a cached object 
Extend the fscache netfs API so that the netfs can ask as to whether a cache
object is up to date with respect to its corresponding netfs object:

	int fscache_check_consistency(struct fscache_cookie *cookie)

This will call back to the netfs to check whether the auxiliary data associated
with a cookie is correct.  It returns 0 if it is and -ESTALE if it isn't; it
may also return -ENOMEM and -ERESTARTSYS.

The backends now have to implement a mandatory operation pointer:

	int (*check_consistency)(struct fscache_object *object)

that corresponds to the above API call.  FS-Cache takes care of pinning the
object and the cookie in memory and managing this call with respect to the
object state.

Original-author: Hongyi Jia <jiayisuse@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Hongyi Jia <jiayisuse@gmail.com>
cc: Milosz Tanski <milosz@adfin.com>
 2013-09-06 09:17:30 +01:00
David Howells
dcfae32f89 FS-Cache: Don't use spin_is_locked() in assertions 
Under certain circumstances, spin_is_locked() is hardwired to 0 - even when the
code would normally be in a locked section where it should return 1.  This
means it cannot be used for an assertion that checks that a spinlock is locked.

Remove such usages from FS-Cache.

The following oops might otherwise be observed:

FS-Cache: Assertion failed
BUG: failure at fs/fscache/operation.c:270/fscache_start_operations()!
Kernel panic - not syncing: BUG!
CPU: 0 PID: 10 Comm: kworker/u2:1 Not tainted 3.10.0-rc1-00133-ge7ebb75 #2
Workqueue: fscache_operation fscache_op_work_func [fscache]
7f091c48 603c8947 7f090000 7f9b1361 7f25f080 00000001 7f26d440 7f091c90
60299eb8 7f091d90 602951c5 7f26d440 3000000008 7f091da0 7f091cc0 7f091cd0
00000007 00000007 00000006 7f091ae0 00000010 0000010e 7f9af330 7f091ae0
Call Trace:
7f091c88: [<60299eb8>] dump_stack+0x17/0x19
7f091c98: [<602951c5>] panic+0xf4/0x1e9
7f091d38: [<6002b10e>] set_signals+0x1e/0x40
7f091d58: [<6005b89e>] __wake_up+0x4e/0x70
7f091d98: [<7f9aa003>] fscache_start_operations+0x43/0x50 [fscache]
7f091da8: [<7f9aa1e3>] fscache_op_complete+0x1d3/0x220 [fscache]
7f091db8: [<60082985>] unlock_page+0x55/0x60
7f091de8: [<7fb25bb0>] cachefiles_read_copier+0x250/0x330 [cachefiles]
7f091e58: [<7f9ab03c>] fscache_op_work_func+0xac/0x120 [fscache]
7f091e88: [<6004d5b0>] process_one_work+0x250/0x3a0
7f091ef8: [<6004edc7>] worker_thread+0x177/0x2a0
7f091f38: [<6004ec50>] worker_thread+0x0/0x2a0
7f091f58: [<60054418>] kthread+0xd8/0xe0
7f091f68: [<6005bb27>] finish_task_switch.isra.64+0x37/0xa0
7f091fd8: [<600185cf>] new_thread_handler+0x8f/0xb0

Reported-by: Milosz Tanski <milosz@adfin.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-tested-By: Milosz Tanski <milosz@adfin.com>
 2013-06-19 14:16:47 +01:00
David Howells
1bb4b7f98f FS-Cache: The retrieval remaining-pages counter needs to be atomic_t 
struct fscache_retrieval contains a count of the number of pages that still
need some processing (n_pages).  This is decremented as the pages are
processed.

However, this needs to be atomic as fscache_retrieval_complete() (I think) just
occasionally may be called from cachefiles_read_backing_file() and
cachefiles_read_copier() simultaneously.

This happens when an fscache_read_or_alloc_pages() request containing a lot of
pages (say a couple of hundred) is being processed.  The read on each backing
page is dispatched individually because we need to insert a monitor into the
waitqueue to catch when the read completes.  However, under low-memory
conditions, we might be forced to wait in the allocator - and this gives the
I/O on the backing page a chance to complete first.

When the I/O completes, fscache_enqueue_retrieval() chucks the retrieval onto
the workqueue without waiting for the operation to finish the initial I/O
dispatch (we want to release any pages we can as soon as we can), thus both can
end up running simultaneously and potentially attempting to partially complete
the retrieval simultaneously (ENOMEM may occur, backing pages may already be in
the page cache).

This was demonstrated by parallelling the non-atomic counter with an atomic
counter and printing both of them when the assertion fails.  At this point, the
atomic counter has reached zero, but the non-atomic counter has not.

To fix this, make the counter an atomic_t.

This results in the following bug appearing

	FS-Cache: Assertion failed
	3 == 5 is false
	------------[ cut here ]------------
	kernel BUG at fs/fscache/operation.c:421!

or

	FS-Cache: Assertion failed
	3 == 5 is false
	------------[ cut here ]------------
	kernel BUG at fs/fscache/operation.c:414!

With a backtrace like the following:

RIP: 0010:[<ffffffffa0211b1d>] fscache_put_operation+0x1ad/0x240 [fscache]
Call Trace:
 [<ffffffffa0213185>] fscache_retrieval_work+0x55/0x270 [fscache]
 [<ffffffffa0213130>] ? fscache_retrieval_work+0x0/0x270 [fscache]
 [<ffffffff81090b10>] worker_thread+0x170/0x2a0
 [<ffffffff81096d10>] ? autoremove_wake_function+0x0/0x40
 [<ffffffff810909a0>] ? worker_thread+0x0/0x2a0
 [<ffffffff81096966>] kthread+0x96/0xa0
 [<ffffffff8100c0ca>] child_rip+0xa/0x20
 [<ffffffff810968d0>] ? kthread+0x0/0xa0
 [<ffffffff8100c0c0>] ? child_rip+0x0/0x20

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-tested-By: Milosz Tanski <milosz@adfin.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
 2013-06-19 14:16:47 +01:00
David Howells
1362729b16 FS-Cache: Simplify cookie retention for fscache_objects, fixing oops 
Simplify the way fscache cache objects retain their cookie.  The way I
implemented the cookie storage handling made synchronisation a pain (ie. the
object state machine can't rely on the cookie actually still being there).

Instead of the the object being detached from the cookie and the cookie being
freed in __fscache_relinquish_cookie(), we defer both operations:

 (*) The detachment of the object from the list in the cookie now takes place
     in fscache_drop_object() and is thus governed by the object state machine
     (fscache_detach_from_cookie() has been removed).

 (*) The release of the cookie is now in fscache_object_destroy() - which is
     called by the cache backend just before it frees the object.

This means that the fscache_cookie struct is now available to the cache all the
way through from ->alloc_object() to ->drop_object() and ->put_object() -
meaning that it's no longer necessary to take object->lock to guarantee access.

However, __fscache_relinquish_cookie() doesn't wait for the object to go all
the way through to destruction before letting the netfs proceed.  That would
massively slow down the netfs.  Since __fscache_relinquish_cookie() leaves the
cookie around, in must therefore break all attachments to the netfs - which
includes ->def, ->netfs_data and any outstanding page read/writes.

To handle this, struct fscache_cookie now has an n_active counter:

 (1) This starts off initialised to 1.

 (2) Any time the cache needs to get at the netfs data, it calls
     fscache_use_cookie() to increment it - if it is not zero.  If it was zero,
     then access is not permitted.

 (3) When the cache has finished with the data, it calls fscache_unuse_cookie()
     to decrement it.  This does a wake-up on it if it reaches 0.

 (4) __fscache_relinquish_cookie() decrements n_active and then waits for it to
     reach 0.  The initialisation to 1 in step (1) ensures that we only get
     wake ups when we're trying to get rid of the cookie.

This leaves __fscache_relinquish_cookie() a lot simpler.


***
This fixes a problem in the current code whereby if fscache_invalidate() is
followed sufficiently quickly by fscache_relinquish_cookie() then it is
possible for __fscache_relinquish_cookie() to have detached the cookie from the
object and cleared the pointer before a thread is dispatched to process the
invalidation state in the object state machine.

Since the pending write clearance was deferred to the invalidation state to
make it asynchronous, we need to either wait in relinquishment for the stores
tree to be cleared in the invalidation state or we need to handle the clearance
in relinquishment.

Further, if the relinquishment code does clear the tree, then the invalidation
state need to make the clearance contingent on still having the cookie to hand
(since that's where the tree is rooted) and we have to prevent the cookie from
disappearing for the duration.

This can lead to an oops like the following:

BUG: unable to handle kernel NULL pointer dereference at 000000000000000c
...
RIP: 0010:[<ffffffff8151023e>] _spin_lock+0xe/0x30
...
CR2: 000000000000000c ...
...
Process kslowd002 (...)
....
Call Trace:
 [<ffffffffa01c3278>] fscache_invalidate_writes+0x38/0xd0 [fscache]
 [<ffffffff810096f0>] ? __switch_to+0xd0/0x320
 [<ffffffff8105e759>] ? find_busiest_queue+0x69/0x150
 [<ffffffff8110ddd4>] ? slow_work_enqueue+0x104/0x180
 [<ffffffffa01c1303>] fscache_object_slow_work_execute+0x5e3/0x9d0 [fscache]
 [<ffffffff81096b67>] ? bit_waitqueue+0x17/0xd0
 [<ffffffff8110e233>] slow_work_execute+0x233/0x310
 [<ffffffff8110e515>] slow_work_thread+0x205/0x360
 [<ffffffff81096ca0>] ? autoremove_wake_function+0x0/0x40
 [<ffffffff8110e310>] ? slow_work_thread+0x0/0x360
 [<ffffffff81096936>] kthread+0x96/0xa0
 [<ffffffff8100c0ca>] child_rip+0xa/0x20
 [<ffffffff810968a0>] ? kthread+0x0/0xa0
 [<ffffffff8100c0c0>] ? child_rip+0x0/0x20

The parameter to fscache_invalidate_writes() was object->cookie which is NULL.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Milosz Tanski <milosz@adfin.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
 2013-06-19 14:16:47 +01:00
David Howells
caaef6900b FS-Cache: Fix object state machine to have separate work and wait states 
Fix object state machine to have separate work and wait states as that makes
it easier to envision.

There are now three kinds of state:

 (1) Work state.  This is an execution state.  No event processing is performed
     by a work state.  The function attached to a work state returns a pointer
     indicating the next state to which the OSM should transition.  Returning
     NO_TRANSIT repeats the current state, but goes back to the scheduler
     first.

 (2) Wait state.  This is an event processing state.  No execution is
     performed by a wait state.  Wait states are just tables of "if event X
     occurs, clear it and transition to state Y".  The dispatcher returns to
     the scheduler if none of the events in which the wait state has an
     interest are currently pending.

 (3) Out-of-band state.  This is a special work state.  Transitions to normal
     states can be overridden when an unexpected event occurs (eg. I/O error).
     Instead the dispatcher disables and clears the OOB event and transits to
     the specified work state.  This then acts as an ordinary work state,
     though object->state points to the overridden destination.  Returning
     NO_TRANSIT resumes the overridden transition.

In addition, the states have names in their definitions, so there's no need for
tables of state names.  Further, the EV_REQUEUE event is no longer necessary as
that is automatic for work states.

Since the states are now separate structs rather than values in an enum, it's
not possible to use comparisons other than (non-)equality between them, so use
some object->flags to indicate what phase an object is in.

The EV_RELEASE, EV_RETIRE and EV_WITHDRAW events have been squished into one
(EV_KILL).  An object flag now carries the information about retirement.

Similarly, the RELEASING, RECYCLING and WITHDRAWING states have been merged
into an KILL_OBJECT state and additional states have been added for handling
waiting dependent objects (JUMPSTART_DEPS and KILL_DEPENDENTS).

A state has also been added for synchronising with parent object initialisation
(WAIT_FOR_PARENT) and another for initiating look up (PARENT_READY).

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Milosz Tanski <milosz@adfin.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
 2013-06-19 14:16:47 +01:00
David Howells
493f7bc114 FS-Cache: Wrap checks on object state 
Wrap checks on object state (mostly outside of fs/fscache/object.c) with
inline functions so that the mechanism can be replaced.

Some of the state checks within object.c are left as-is as they will be
replaced.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Milosz Tanski <milosz@adfin.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
 2013-06-19 14:16:47 +01:00
David Howells
610be24ee4 FS-Cache: Uninline fscache_object_init() 
Uninline fscache_object_init() so as not to expose some of the FS-Cache
internals to the cache backend.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Milosz Tanski <milosz@adfin.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
 2013-06-19 14:16:47 +01:00
David Howells
0c59a95d90 FS-Cache: Don't sleep in page release if __GFP_FS is not set 
Don't sleep in __fscache_maybe_release_page() if __GFP_FS is not set.  This
goes some way towards mitigating fscache deadlocking against ext4 by way of
the allocator, eg:

INFO: task flush-8:0:24427 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
flush-8:0       D ffff88003e2b9fd8     0 24427      2 0x00000000
 ffff88003e2b9138 0000000000000046 ffff880012e3a040 ffff88003e2b9fd8
 0000000000011c80 ffff88003e2b9fd8 ffffffff81a10400 ffff880012e3a040
 0000000000000002 ffff880012e3a040 ffff88003e2b9098 ffffffff8106dcf5
Call Trace:
 [<ffffffff8106dcf5>] ? __lock_is_held+0x31/0x53
 [<ffffffff81219b61>] ? radix_tree_lookup_element+0xf4/0x12a
 [<ffffffff81454bed>] schedule+0x60/0x62
 [<ffffffffa01d349c>] __fscache_wait_on_page_write+0x8b/0xa5 [fscache]
 [<ffffffff810498a8>] ? __init_waitqueue_head+0x4d/0x4d
 [<ffffffffa01d393a>] __fscache_maybe_release_page+0x30c/0x324 [fscache]
 [<ffffffffa01d369a>] ? __fscache_maybe_release_page+0x6c/0x324 [fscache]
 [<ffffffff81071b53>] ? trace_hardirqs_on_caller+0x114/0x170
 [<ffffffffa01fd7b2>] nfs_fscache_release_page+0x68/0x94 [nfs]
 [<ffffffffa01ef73e>] nfs_release_page+0x7e/0x86 [nfs]
 [<ffffffff810aa553>] try_to_release_page+0x32/0x3b
 [<ffffffff810b6c70>] shrink_page_list+0x535/0x71a
 [<ffffffff81071b53>] ? trace_hardirqs_on_caller+0x114/0x170
 [<ffffffff810b7352>] shrink_inactive_list+0x20a/0x2dd
 [<ffffffff81071a13>] ? mark_held_locks+0xbe/0xea
 [<ffffffff810b7a65>] shrink_lruvec+0x34c/0x3eb
 [<ffffffff810b7bd3>] do_try_to_free_pages+0xcf/0x355
 [<ffffffff810b7fc8>] try_to_free_pages+0x9a/0xa1
 [<ffffffff810b08d2>] __alloc_pages_nodemask+0x494/0x6f7
 [<ffffffff810d9a07>] kmem_getpages+0x58/0x155
 [<ffffffff810dc002>] fallback_alloc+0x120/0x1f3
 [<ffffffff8106db23>] ? trace_hardirqs_off+0xd/0xf
 [<ffffffff810dbed3>] ____cache_alloc_node+0x177/0x186
 [<ffffffff81162a6c>] ? ext4_init_io_end+0x1c/0x37
 [<ffffffff810dc403>] kmem_cache_alloc+0xf1/0x176
 [<ffffffff810b17ac>] ? test_set_page_writeback+0x101/0x113
 [<ffffffff81162a6c>] ext4_init_io_end+0x1c/0x37
 [<ffffffff81162ce4>] ext4_bio_write_page+0x20f/0x3af
 [<ffffffff8115cc02>] mpage_da_submit_io+0x26e/0x2f6
 [<ffffffff811088e5>] ? __find_get_block_slow+0x38/0x133
 [<ffffffff81161348>] mpage_da_map_and_submit+0x3a7/0x3bd
 [<ffffffff81161a60>] ext4_da_writepages+0x30d/0x426
 [<ffffffff810b3359>] do_writepages+0x1c/0x2a
 [<ffffffff81102f4d>] __writeback_single_inode+0x3e/0xe5
 [<ffffffff81103995>] writeback_sb_inodes+0x1bd/0x2f4
 [<ffffffff81103b3b>] __writeback_inodes_wb+0x6f/0xb4
 [<ffffffff81103c81>] wb_writeback+0x101/0x195
 [<ffffffff81071b53>] ? trace_hardirqs_on_caller+0x114/0x170
 [<ffffffff811043aa>] ? wb_do_writeback+0xaa/0x173
 [<ffffffff8110434a>] wb_do_writeback+0x4a/0x173
 [<ffffffff81071bbc>] ? trace_hardirqs_on+0xd/0xf
 [<ffffffff81038554>] ? del_timer+0x4b/0x5b
 [<ffffffff811044e0>] bdi_writeback_thread+0x6d/0x147
 [<ffffffff81104473>] ? wb_do_writeback+0x173/0x173
 [<ffffffff81048fbc>] kthread+0xd0/0xd8
 [<ffffffff81455eb2>] ? _raw_spin_unlock_irq+0x29/0x3e
 [<ffffffff81048eec>] ? __init_kthread_worker+0x55/0x55
 [<ffffffff81456aac>] ret_from_fork+0x7c/0xb0
 [<ffffffff81048eec>] ? __init_kthread_worker+0x55/0x55
2 locks held by flush-8:0/24427:
 #0:  (&type->s_umount_key#41){.+.+..}, at: [<ffffffff810e3b73>] grab_super_passive+0x4c/0x76
 #1:  (jbd2_handle){+.+...}, at: [<ffffffff81190d81>] start_this_handle+0x475/0x4ea


The problem here is that another thread, which is attempting to write the
to-be-stored NFS page to the on-ext4 cache file is waiting for the journal
lock, eg:

INFO: task kworker/u:2:24437 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kworker/u:2     D ffff880039589768     0 24437      2 0x00000000
 ffff8800395896d8 0000000000000046 ffff8800283bf040 ffff880039589fd8
 0000000000011c80 ffff880039589fd8 ffff880039f0b040 ffff8800283bf040
 0000000000000006 ffff8800283bf6b8 ffff880039589658 ffffffff81071a13
Call Trace:
 [<ffffffff81071a13>] ? mark_held_locks+0xbe/0xea
 [<ffffffff81455e73>] ? _raw_spin_unlock_irqrestore+0x3a/0x50
 [<ffffffff81071b53>] ? trace_hardirqs_on_caller+0x114/0x170
 [<ffffffff81071bbc>] ? trace_hardirqs_on+0xd/0xf
 [<ffffffff81454bed>] schedule+0x60/0x62
 [<ffffffff81190c23>] start_this_handle+0x317/0x4ea
 [<ffffffff810498a8>] ? __init_waitqueue_head+0x4d/0x4d
 [<ffffffff81190fcc>] jbd2__journal_start+0xb3/0x12e
 [<ffffffff81176606>] __ext4_journal_start_sb+0xb2/0xc6
 [<ffffffff8115f137>] ext4_da_write_begin+0x109/0x233
 [<ffffffff810a964d>] generic_file_buffered_write+0x11a/0x264
 [<ffffffff811032cf>] ? __mark_inode_dirty+0x2d/0x1ee
 [<ffffffff810ab1ab>] __generic_file_aio_write+0x2a5/0x2d5
 [<ffffffff810ab24a>] generic_file_aio_write+0x6f/0xd0
 [<ffffffff81159a2c>] ext4_file_write+0x38c/0x3c4
 [<ffffffff810e0915>] do_sync_write+0x91/0xd1
 [<ffffffffa00a17f0>] cachefiles_write_page+0x26f/0x310 [cachefiles]
 [<ffffffffa01d470b>] fscache_write_op+0x21e/0x37a [fscache]
 [<ffffffff81455eb2>] ? _raw_spin_unlock_irq+0x29/0x3e
 [<ffffffffa01d2479>] fscache_op_work_func+0x78/0xd7 [fscache]
 [<ffffffff8104455a>] process_one_work+0x232/0x3a8
 [<ffffffff810444ff>] ? process_one_work+0x1d7/0x3a8
 [<ffffffff81044ee0>] worker_thread+0x214/0x303
 [<ffffffff81044ccc>] ? manage_workers+0x245/0x245
 [<ffffffff81048fbc>] kthread+0xd0/0xd8
 [<ffffffff81455eb2>] ? _raw_spin_unlock_irq+0x29/0x3e
 [<ffffffff81048eec>] ? __init_kthread_worker+0x55/0x55
 [<ffffffff81456aac>] ret_from_fork+0x7c/0xb0
 [<ffffffff81048eec>] ? __init_kthread_worker+0x55/0x55
4 locks held by kworker/u:2/24437:
 #0:  (fscache_operation){.+.+.+}, at: [<ffffffff810444ff>] process_one_work+0x1d7/0x3a8
 #1:  ((&op->work)){+.+.+.}, at: [<ffffffff810444ff>] process_one_work+0x1d7/0x3a8
 #2:  (sb_writers#14){.+.+.+}, at: [<ffffffff810ab22c>] generic_file_aio_write+0x51/0xd0
 #3:  (&sb->s_type->i_mutex_key#19){+.+.+.}, at: [<ffffffff810ab236>] generic_file_aio_write+0x5b/0x

fscache already tries to cancel pending stores, but it can't cancel a write
for which I/O is already in progress.

An alternative would be to accept writing garbage to the cache under extreme
circumstances and to kill the afflicted cache object if we have to do this.
However, we really need to know how strapped the allocator is before deciding
to do that.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Milosz Tanski <milosz@adfin.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
 2013-06-19 14:16:47 +01:00
Sebastian Andrzej Siewior
ee8be57bc3 fs/fscache: remove spin_lock() from the condition in while() 
The spinlock() within the condition in while() will cause a compile error
if it is not a function. This is not a problem on mainline but it does not
look pretty and there is no reason to do it that way.
That patch writes it a little differently and avoids the double condition.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Milosz Tanski <milosz@adfin.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
 2013-06-19 14:16:47 +01:00
Anurup m
ec686c9239 fs/fscache/stats.c: fix memory leak 
There is a kernel memory leak observed when the proc file
/proc/fs/fscache/stats is read.

The reason is that in fscache_stats_open, single_open is called and the
respective release function is not called during release.  Hence fix
with correct release function - single_release().

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=57101

Signed-off-by: Anurup m <anurup.m@huawei.com>
Cc: shyju pv <shyju.pv@huawei.com>
Cc: Sanil kumar <sanil.kumar@huawei.com>
Cc: Nataraj m <nataraj.m@huawei.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: David Howells <dhowells@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-04-29 15:54:27 -07:00
Sasha Levin
b67bfe0d42 hlist: drop the node parameter from iterators 
I'm not sure why, but the hlist for each entry iterators were conceived

        list_for_each_entry(pos, head, member)

The hlist ones were greedy and wanted an extra parameter:

        hlist_for_each_entry(tpos, pos, head, member)

Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.

Besides the semantic patch, there was some manual work required:

 - Fix up the actual hlist iterators in linux/list.h
 - Fix up the declaration of other iterators based on the hlist ones.
 - A very small amount of places were using the 'node' parameter, this
 was modified to use 'obj->member' instead.
 - Coccinelle didn't handle the hlist_for_each_entry_safe iterator
 properly, so those had to be fixed up manually.

The semantic patch which is mostly the work of Peter Senna Tschudin is here:

@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;

type T;
expression a,c,d,e;
identifier b;
statement S;
@@

-T b;
    <+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
    ...+>

[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2013-02-27 19:10:24 -08:00
David Howells
91c7fbbf63 FS-Cache: Clear remaining page count on retrieval cancellation 
Provide fscache_cancel_op() with a pointer to a function it should invoke under
lock if it cancels an operation.

Use this to clear the remaining page count upon cancellation of a pending
retrieval operation so that fscache_release_retrieval_op() doesn't get an
assertion failure (see below).  This can happen when a signal occurs, say from
CTRL-C being pressed during data retrieval.

FS-Cache: Assertion failed
3 == 0 is false
------------[ cut here ]------------
kernel BUG at fs/fscache/page.c:237!
invalid opcode: 0000 [#641] SMP
Modules linked in: cachefiles(F) nfsv4(F) nfsv3(F) nfsv2(F) nfs(F) fscache(F) auth_rpcgss(F) nfs_acl(F) lockd(F) sunrpc(F)
CPU 0
Pid: 6075, comm: slurp-q Tainted: GF     D      3.7.0-rc8-fsdevel+ #411                  /DG965RY
RIP: 0010:[<ffffffffa007f328>]  [<ffffffffa007f328>] fscache_release_retrieval_op+0x75/0xff [fscache]
RSP: 0000:ffff88001c6d7988  EFLAGS: 00010296
RAX: 000000000000000f RBX: ffff880014cdfe00 RCX: ffffffff6c102000
RDX: ffffffff8102d1ad RSI: ffffffff6c102000 RDI: ffffffff8102d1d6
RBP: ffff88001c6d7998 R08: 0000000000000002 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 00000000fffffe00
R13: ffff88001c6d7ab4 R14: ffff88001a8638a0 R15: ffff88001552b190
FS:  00007f877aaf0700(0000) GS:ffff88003bc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00007fff11378fd2 CR3: 000000001c6c6000 CR4: 00000000000007f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process slurp-q (pid: 6075, threadinfo ffff88001c6d6000, task ffff88001c6c4080)
Stack:
 ffffffffa007ec07 ffff880014cdfe00 ffff88001c6d79c8 ffffffffa007db4d
 ffffffffa007ec07 ffff880014cdfe00 00000000fffffe00 ffff88001c6d7ab4
 ffff88001c6d7a38 ffffffffa008116d 0000000000000000 ffff88001c6c4080
Call Trace:
 [<ffffffffa007ec07>] ? fscache_cancel_op+0x194/0x1cf [fscache]
 [<ffffffffa007db4d>] fscache_put_operation+0x135/0x2ed [fscache]
 [<ffffffffa007ec07>] ? fscache_cancel_op+0x194/0x1cf [fscache]
 [<ffffffffa008116d>] __fscache_read_or_alloc_pages+0x413/0x4bc [fscache]
 [<ffffffff810ac8ae>] ? __alloc_pages_nodemask+0x195/0x75c
 [<ffffffffa00aab0f>] __nfs_readpages_from_fscache+0x86/0x13d [nfs]
 [<ffffffffa00a5fe0>] nfs_readpages+0x186/0x1bd [nfs]
 [<ffffffff810d23c8>] ? alloc_pages_current+0xc7/0xe4
 [<ffffffff810a68b5>] ? __page_cache_alloc+0x84/0x91
 [<ffffffff810af912>] ? __do_page_cache_readahead+0xa6/0x2e0
 [<ffffffff810afaa3>] __do_page_cache_readahead+0x237/0x2e0
 [<ffffffff810af912>] ? __do_page_cache_readahead+0xa6/0x2e0
 [<ffffffff810afe3e>] ra_submit+0x1c/0x20
 [<ffffffff810b019b>] ondemand_readahead+0x359/0x382
 [<ffffffff810b0279>] page_cache_sync_readahead+0x38/0x3a
 [<ffffffff810a77b5>] generic_file_aio_read+0x26b/0x637
 [<ffffffffa00f1852>] ? nfs_mark_delegation_referenced+0xb/0xb [nfsv4]
 [<ffffffffa009cc85>] nfs_file_read+0xaa/0xcf [nfs]
 [<ffffffff810db5b3>] do_sync_read+0x91/0xd1
 [<ffffffff810dbb8b>] vfs_read+0x9b/0x144
 [<ffffffff810dbc78>] sys_read+0x44/0x75
 [<ffffffff81422892>] system_call_fastpath+0x16/0x1b

Signed-off-by: David Howells <dhowells@redhat.com>
 2012-12-20 22:35:15 +00:00
David Howells
1f372dff1d FS-Cache: Mark cancellation of in-progress operation 
Mark as cancelled an operation that is in progress rather than pending at the
time it is cancelled, and call fscache_complete_op() to cancel an operation so
that blocked ops can be started.

Signed-off-by: David Howells <dhowells@redhat.com>
 2012-12-20 22:34:00 +00:00
David Howells
7ef001e937 FS-Cache: One of the write operation paths doesn't set the object state 
In fscache_write_op(), if the object is determined to have become inactive or
to have lost its cookie, we don't move the operation state from in-progress,
and so an assertion in fscache_put_operation() fails with an assertion (see
below).

Instrumenting fscache_op_work_func() indicates that it called
fscache_write_op() before calling fscache_put_operation() - where the assertion
failed.  The assertion at line 433 indicates that the operation state is
IN_PROGRESS rather than being COMPLETE or CANCELLED.

Instrumenting fscache_write_op() showed that it was being called on an object
that had had its cookie removed and that this was due to relinquishment of the
cookie by the netfs.  At this point fscache no longer has access to the pages
of netfs data that were requested to be written, and so simply cancelling the
operation is the thing to do.

FS-Cache: Assertion failed
3 == 5 is false
------------[ cut here ]------------
kernel BUG at fs/fscache/operation.c:433!
invalid opcode: 0000 [#1] SMP
Modules linked in: cachefiles(F) nfsv4(F) nfsv3(F) nfsv2(F) nfs(F) fscache(F) auth_rpcgss(F) nfs_acl(F) lockd(F) sunrpc(F)
CPU 0
Pid: 1035, comm: kworker/u:3 Tainted: GF            3.7.0-rc8-fsdevel+ #411                  /DG965RY
RIP: 0010:[<ffffffffa007db22>]  [<ffffffffa007db22>] fscache_put_operation+0x11a/0x2ed [fscache]
RSP: 0018:ffff88003e32bcf8  EFLAGS: 00010296
RAX: 000000000000000f RBX: ffff88001818eb78 RCX: ffffffff6c102000
RDX: ffffffff8102d1ad RSI: ffffffff6c102000 RDI: ffffffff8102d1d6
RBP: ffff88003e32bd18 R08: 0000000000000002 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffa00811da
R13: 0000000000000001 R14: 0000000100625d26 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff88003bc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00007fff7dd31c68 CR3: 000000003d730000 CR4: 00000000000007f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process kworker/u:3 (pid: 1035, threadinfo ffff88003e32a000, task ffff88003bb38080)
Stack:
 ffffffff8102d1ad ffff88001818eb78 ffffffffa00811da 0000000000000001
 ffff88003e32bd48 ffffffffa007f0ad ffff88001818eb78 ffffffff819583c0
 ffff88003df24e00 ffff88003882c3e0 ffff88003e32bde8 ffffffff81042de0
Call Trace:
 [<ffffffff8102d1ad>] ? vprintk_emit+0x3c6/0x41a
 [<ffffffffa00811da>] ? __fscache_read_or_alloc_pages+0x4bc/0x4bc [fscache]
 [<ffffffffa007f0ad>] fscache_op_work_func+0xec/0x123 [fscache]
 [<ffffffff81042de0>] process_one_work+0x21c/0x3b0
 [<ffffffff81042d82>] ? process_one_work+0x1be/0x3b0
 [<ffffffffa007efc1>] ? fscache_operation_gc+0x23e/0x23e [fscache]
 [<ffffffff8104332e>] worker_thread+0x202/0x2df
 [<ffffffff8104312c>] ? rescuer_thread+0x18e/0x18e
 [<ffffffff81047c1c>] kthread+0xd0/0xd8
 [<ffffffff81421bfa>] ? _raw_spin_unlock_irq+0x29/0x3e
 [<ffffffff81047b4c>] ? __init_kthread_worker+0x55/0x55
 [<ffffffff814227ec>] ret_from_fork+0x7c/0xb0
 [<ffffffff81047b4c>] ? __init_kthread_worker+0x55/0x55

Signed-off-by: David Howells <dhowells@redhat.com>
 2012-12-20 22:20:40 +00:00
David Howells
9c04caa81b FS-Cache: Fix signal handling during waits 
wait_on_bit() with TASK_INTERRUPTIBLE returns 1 rather than a negative error
code, so change what we check for.  This means that the signal handling in
fscache_wait_for_retrieval_activation()  should now work properly.

Without this, the following bug can be seen if CTRL-C is pressed during
fscache read operation:

FS-Cache: Assertion failed
2 == 3 is false
------------[ cut here ]------------
kernel BUG at fs/fscache/page.c:347!
invalid opcode: 0000 [#1] SMP
Modules linked in: cachefiles(F) nfsv4(F) nfsv3(F) nfsv2(F) nfs(F) fscache(F) auth_rpcgss(F) nfs_acl(F) lockd(F) sunrpc(F)
CPU 1
Pid: 15006, comm: slurp-q Tainted: GF            3.7.0-rc8-fsdevel+ #411                  /DG965RY
RIP: 0010:[<ffffffffa007fcb4>]  [<ffffffffa007fcb4>] fscache_wait_for_retrieval_activation+0x167/0x177 [fscache]
RSP: 0018:ffff88002a4c39a8  EFLAGS: 00010292
RAX: 000000000000001a RBX: ffff88002d3dc158 RCX: 0000000000008685
RDX: ffffffff8102ccd6 RSI: 0000000000000001 RDI: ffffffff8102d1d6
RBP: ffff88002a4c39c8 R08: 0000000000000002 R09: 0000000000000000
R10: ffffffff8163afa0 R11: ffff88003bd11900 R12: ffffffffa00868c8
R13: ffff880028306458 R14: ffff88002d3dc1b0 R15: ffff88001372e538
FS:  00007f17426a0700(0000) GS:ffff88003bd00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00007f1742494a44 CR3: 0000000031bd7000 CR4: 00000000000007e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process slurp-q (pid: 15006, threadinfo ffff88002a4c2000, task ffff880023de3040)
Stack:
 ffff88002d3dc158 ffff88001372e538 ffff88002a4c3ab4 ffff8800283064e0
 ffff88002a4c3a38 ffffffffa0080f6d 0000000000000000 ffff880023de3040
 ffff88002a4c3ac8 ffffffff810ac8ae ffff880028306458 ffff88002a4c3bc8
Call Trace:
 [<ffffffffa0080f6d>] __fscache_read_or_alloc_pages+0x24f/0x4bc [fscache]
 [<ffffffff810ac8ae>] ? __alloc_pages_nodemask+0x195/0x75c
 [<ffffffffa00aab0f>] __nfs_readpages_from_fscache+0x86/0x13d [nfs]
 [<ffffffffa00a5fe0>] nfs_readpages+0x186/0x1bd [nfs]
 [<ffffffff810d23c8>] ? alloc_pages_current+0xc7/0xe4
 [<ffffffff810a68b5>] ? __page_cache_alloc+0x84/0x91
 [<ffffffff810af912>] ? __do_page_cache_readahead+0xa6/0x2e0
 [<ffffffff810afaa3>] __do_page_cache_readahead+0x237/0x2e0
 [<ffffffff810af912>] ? __do_page_cache_readahead+0xa6/0x2e0
 [<ffffffff810afe3e>] ra_submit+0x1c/0x20
 [<ffffffff810b019b>] ondemand_readahead+0x359/0x382
 [<ffffffff810b0279>] page_cache_sync_readahead+0x38/0x3a
 [<ffffffff810a77b5>] generic_file_aio_read+0x26b/0x637
 [<ffffffffa00f1852>] ? nfs_mark_delegation_referenced+0xb/0xb [nfsv4]
 [<ffffffffa009cc85>] nfs_file_read+0xaa/0xcf [nfs]
 [<ffffffff810db5b3>] do_sync_read+0x91/0xd1
 [<ffffffff810dbb8b>] vfs_read+0x9b/0x144
 [<ffffffff810dbc78>] sys_read+0x44/0x75
 [<ffffffff81422892>] system_call_fastpath+0x16/0x1b

Signed-off-by: David Howells <dhowells@redhat.com>
 2012-12-20 22:20:23 +00:00
David Howells
969695215f FS-Cache: Add transition to handle invalidate immediately after lookup 
Add a missing transition to the FS-Cache object state machine to handle an
invalidation event occuring between the back end completing the object lookup
by calling fscache_obtained_object() (which moves to state OBJECT_AVAILABLE)
and the backend returning to fscache_lookup_object() and thence to
fscache_object_state_machine() which then does a goto lookup_transit to handle
the transition - but lookup_transit doesn't handle EV_INVALIDATE.

Without this, the following BUG can be logged:

	FS-Cache: Unsupported event 2 [5/f7] in state OBJECT_AVAILABLE
	------------[ cut here ]------------
	kernel BUG at fs/fscache/object.c:357!

Where event 2 is EV_INVALIDATE.

Signed-off-by: David Howells <dhowells@redhat.com>
 2012-12-20 22:19:22 +00:00
David Howells
8c209ce721 NFS: nfs_migrate_page() does not wait for FS-Cache to finish with a page 
nfs_migrate_page() does not wait for FS-Cache to finish with a page, probably
leading to the following bad-page-state:

 BUG: Bad page state in process python-bin  pfn:17d39b
 page:ffffea00053649e8 flags:004000000000100c count:0 mapcount:0 mapping:(null)
index:38686 (Tainted: G    B      ---------------- )
 Pid: 31053, comm: python-bin Tainted: G    B      ----------------
2.6.32-71.24.1.el6.x86_64 #1
 Call Trace:
 [<ffffffff8111bfe7>] bad_page+0x107/0x160
 [<ffffffff8111ee69>] free_hot_cold_page+0x1c9/0x220
 [<ffffffff8111ef19>] __pagevec_free+0x59/0xb0
 [<ffffffff8104b988>] ? flush_tlb_others_ipi+0x128/0x130
 [<ffffffff8112230c>] release_pages+0x21c/0x250
 [<ffffffff8115b92a>] ? remove_migration_pte+0x28a/0x2b0
 [<ffffffff8115f3f8>] ? mem_cgroup_get_reclaim_stat_from_page+0x18/0x70
 [<ffffffff81122687>] ____pagevec_lru_add+0x167/0x180
 [<ffffffff811226f8>] __lru_cache_add+0x58/0x70
 [<ffffffff81122731>] lru_cache_add_lru+0x21/0x40
 [<ffffffff81123f49>] putback_lru_page+0x69/0x100
 [<ffffffff8115c0bd>] migrate_pages+0x13d/0x5d0
 [<ffffffff81122687>] ? ____pagevec_lru_add+0x167/0x180
 [<ffffffff81152ab0>] ? compaction_alloc+0x0/0x370
 [<ffffffff8115255c>] compact_zone+0x4cc/0x600
 [<ffffffff8111cfac>] ? get_page_from_freelist+0x15c/0x820
 [<ffffffff810672f4>] ? check_preempt_wakeup+0x1c4/0x3c0
 [<ffffffff8115290e>] compact_zone_order+0x7e/0xb0
 [<ffffffff81152a49>] try_to_compact_pages+0x109/0x170
 [<ffffffff8111e94d>] __alloc_pages_nodemask+0x5ed/0x850
 [<ffffffff814c9136>] ? thread_return+0x4e/0x778
 [<ffffffff81150d43>] alloc_pages_vma+0x93/0x150
 [<ffffffff81167ea5>] do_huge_pmd_anonymous_page+0x135/0x340
 [<ffffffff814cb6f6>] ? rwsem_down_read_failed+0x26/0x30
 [<ffffffff81136755>] handle_mm_fault+0x245/0x2b0
 [<ffffffff814ce383>] do_page_fault+0x123/0x3a0
 [<ffffffff814cbdf5>] page_fault+0x25/0x30

nfs_migrate_page() calls nfs_fscache_release_page() which doesn't actually wait
- even if __GFP_WAIT is set.  The reason that doesn't wait is that
fscache_maybe_release_page() might deadlock the allocator as the work threads
writing to the cache may all end up sleeping on memory allocation.

However, I wonder if that is actually a problem.  There are a number of things
I can do to deal with this:

 (1) Make nfs_migrate_page() wait.

 (2) Make fscache_maybe_release_page() honour the __GFP_WAIT flag.

 (3) Set a timeout around the wait.

 (4) Make nfs_migrate_page() return an error if the page is still busy.

For the moment, I'll select (2) and (4).

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
 2012-12-20 22:12:03 +00:00
David Howells
8d76349d35 FS-Cache: Exclusive op submission can BUG if there's been an I/O error 
The function to submit an exclusive op (fscache_submit_exclusive_op()) can BUG
if there's been an I/O error because it may see the parent cache object in an
unexpected state.  It should only BUG if there hasn't been an I/O error.

In this case the problem was produced by remounting the cache partition to be
R/O.  The EROFS state was detected and the cache was aborted, but not
everything handled the aborting correctly.

SysRq : Emergency Remount R/O
EXT4-fs (sda6): re-mounted. Opts: (null)
Emergency Remount complete
CacheFiles: I/O Error: Failed to update xattr with error -30
FS-Cache: Cache cachefiles stopped due to I/O error
------------[ cut here ]------------
kernel BUG at fs/fscache/operation.c:128!
invalid opcode: 0000 [#1] SMP 
CPU 0 
Modules linked in: cachefiles nfs fscache auth_rpcgss nfs_acl lockd sunrpc

Pid: 6612, comm: kworker/u:2 Not tainted 3.1.0-rc8-fsdevel+ #1093                  /DG965RY
RIP: 0010:[<ffffffffa00739c0>]  [<ffffffffa00739c0>] fscache_submit_exclusive_op+0x2ad/0x2c2 [fscache]
RSP: 0018:ffff880000853d40  EFLAGS: 00010206
RAX: ffff880038ac72a8 RBX: ffff8800181f2260 RCX: ffffffff81f2b2b0
RDX: 0000000000000001 RSI: ffffffff8179a478 RDI: ffff8800181f2280
RBP: ffff880000853d60 R08: 0000000000000002 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: ffff880038ac7268
R13: ffff8800181f2280 R14: ffff88003a359190 R15: 000000010122b162
FS:  0000000000000000(0000) GS:ffff88003bc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00000034cc4a77f0 CR3: 0000000010e96000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process kworker/u:2 (pid: 6612, threadinfo ffff880000852000, task ffff880014c3c040)
Stack:
 ffff8800181f2260 ffff8800181f2310 ffff880038ac7268 ffff8800181f2260
 ffff880000853dc0 ffffffffa0072375 ffff880037ecfe00 ffff88003a359198
 ffff880000853dc0 0000000000000246 0000000000000000 ffff88000a91d308
Call Trace:
 [<ffffffffa0072375>] fscache_object_work_func+0x792/0xe65 [fscache]
 [<ffffffff81047e44>] process_one_work+0x1eb/0x37f
 [<ffffffff81047de6>] ? process_one_work+0x18d/0x37f
 [<ffffffffa0071be3>] ? fscache_enqueue_dependents+0xd8/0xd8 [fscache]
 [<ffffffff810482e4>] worker_thread+0x15a/0x21a
 [<ffffffff8104818a>] ? rescuer_thread+0x188/0x188
 [<ffffffff8104bf96>] kthread+0x7f/0x87
 [<ffffffff813ad6f4>] kernel_thread_helper+0x4/0x10
 [<ffffffff81026b98>] ? finish_task_switch+0x45/0xc0
 [<ffffffff813abd1d>] ? retint_restore_args+0xe/0xe
 [<ffffffff8104bf17>] ? __init_kthread_worker+0x53/0x53
 [<ffffffff813ad6f0>] ? gs_change+0xb/0xb


Signed-off-by: David Howells <dhowells@redhat.com>
 2012-12-20 22:10:58 +00:00
David Howells
75bc411388 FS-Cache: Limit the number of I/O error reports for a cache 
Limit the number of I/O error reports for a cache to 1 to prevent massive
amounts of noise.  After the first I/O error the cache is taken off line
automatically, so must be restarted to resume caching.

Signed-off-by: David Howells <dhowells@redhat.com>
 2012-12-20 22:10:44 +00:00