The warning is a false positive.
drivers/vme/bridges/vme_tsi148.c: In function 'tsi148_master_write':
drivers/vme/bridges/vme_tsi148.c:1358:31: warning: 'handler' may be used uninitialized in this function [-Wmaybe-uninitialized]
vme_unregister_error_handler(handler);
^
drivers/vme/bridges/vme_tsi148.c: In function 'tsi148_master_read':
drivers/vme/bridges/vme_tsi148.c:1260:31: warning: 'handler' may be used uninitialized in this function [-Wmaybe-uninitialized]
vme_unregister_error_handler(handler);
^
Fixes: 0b04966257 ("vme: change bus error handling scheme")
Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current VME bus error handler adds errors to the bridge error list.
vme_master_{read,write} then traverses that list to look for relevant
errors.
Such scheme didn't work well for accesses going through vme_master_mmap
because they would also allocate a vme_bus_error, but have no way to do
vme_clear_errors call to free that memory.
This changes the error handling process to be other way around: now
vme_master_{read,write} defines a window in VME address space that will
catch possible errors. VME bus error interrupt only traverses these
windows and marks those that had errors in them.
Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Cc: Igor Alekseev <igor.alekseev@itep.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Also changes vme_bus_error_handler to take generic address modifier code
instead of raw contents of a device-specific attribute register.
Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Cc: Igor Alekseev <igor.alekseev@itep.ru>
Acked-by: Martyn Welch <martyn@welchs.me.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Error handling code found in tsi148 is not device specific. In fact it
already relies on shared vme_bus_error struct and vme_bridge.vme_errors
field. The other bridge driver could reuse this code if it is shared.
This introduces a slight behavior change: vme error message won't be
triggered in a rare case when err_chk=1 and kmalloc fails.
Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Cc: Igor Alekseev <igor.alekseev@itep.ru>
Acked-by: Martyn Welch <martyn@welchs.me.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Universe II allows PCI address grannularity of 4K or 64K depending on
the window id. tsi148 only supports 64K. Existing driver implementations
are validating window size against this grannularity and then use that
very size as alignment parameter to pci_bus_alloc_resource. This
constraint is excessive, alignment by granularity should be enough.
This changes alignment constraint from size to a fixed constraint of
64K.
Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Universe II datasheet defines following address space values
for LM_CTL[16:18]
000=A16
001=A24
010=A32
011,100,101=Reserved
110=User1
111=User2
Mask 5<<16 is not the right one for matching [16:18], instead we should
use 7<<16.
Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Cc: Igor Alekseev <igor.alekseev@itep.ru>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This moves DMA mapping of the first list element to vme_list_add, the
same place where other elements mappings occur. This prevents extra
mapping or over-unmapping in the cases when vme_list_exec is called more
or less than one time respectively.
Also adds dma_mapping_error check.
Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Cc: Igor Alekseev <igor.alekseev@itep.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DMA lists on tsi148 weren't processed further than the first item
because of the broken logic. This regression was introduced in:
ac1a4f2caf "Staging: VME: Ensure TSI148 link list descriptors..."
Signed-off-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Cc: Igor Alekseev <igor.alekseev@itep.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The tsi148 driver is registering the slave images as supporting the "USER"
access modes and CR/CSR access mode rather than the master images as it
should.
Remove the incorrect case entries for these modes from the
tsi148_slave_set() function, stop registering slave_images as supporting
these modes and instead register master windows as supporting these modes.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Acked-by: Dmitry Kalinkin <dmitry.kalinkin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The CA91CX42_DCTL_VDW_M define is cut and pasted twice so we can delete
the second instance.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Save some characters by using to_pci_dev() instead of container_of().
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Previously, tsi148_master_set() assumed the address contained in its
PCI bus resource represented the actual PCI bus address. This is a fine
assumption on some platforms. However, on platforms that don't use a
1:1 (CPU:PCI) mapping this results in the tsi148 driver configuring an
invalid master window translation.
This patch updates the vme_tsi148 driver to first convert the address
contained in the PCI bus resource into a PCI bus address before using
it.
[asierra: account for pcibios_resource_to_bus() prototype change]
Signed-off-by: Joe Schultz <jschultz@xes-inc.com>
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch corrects a typo where "vme_base" was used instead of
"*vme_base". The typo resulted in an incorrect value being returned
to userspace (via vme_user).
It also removes the following compile warning on some platforms:
warning: cast from pointer to integer of different size
[asierra: commit title/log rewording]
Signed-off-by: Joe Schultz <jschultz@xes-inc.com>
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ca91cx42 and tsi148 VME bridges use the width of reads and writes on the
PCI bus in part to control the width of the cycles on the VME bus. It is
important that we can control the width of cycles on the VME bus as some VME
hardware requires cycles of a specific width. The memcpy_toio() and
memcpy_fromio() functions do not provide sufficient control, so instead loop
using ioread functions.
Reported-by: Michael Kenney <mfkenney@gmail.com>
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to ensure the correct width cycles on the VME bus, the VME bridge
drivers implement an algorithm to utilise the largest possible width reads and
writes whilst maintaining natural alignment constraints. The algorithm
currently looks at the start address rather than the current read/write address
when determining whether a 16-bit width cycle is required to get to 32-bit
alignment. This results in incorrect alignment,
Reported-by: Jim Strouth <james.strouth@ge.com>
Tested-by: Jim Strouth <james.strouth@ge.com>
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Don't use DEFINE_PCI_DEVICE_TABLE macro, because this macro
is not preferred.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
free_irq() expects the same device identity that was passed to
corresponding request_irq(), otherwise the IRQ is not freed.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix to return a negative error code in the tsi148_crcsr_init() error
handling case instead of 0, as done elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The tsi148 driver can be configured to reserve a window for internal
use (as part of the error checking routine). The intialisation of this
window currently configures a set of attributes that are never used
as these are only ever used by the VME core and this window is not
advertised to the core.
Remove configuration of these attributes.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The logic in the init routine for the TSI148 is inverted. It isn't switching
on the CR/CSR space when it should be and is reporting it's on when its not.
Correct the logic to do the right thing.
Reported-by: De Roo, Steven <steven.deroo@arcelormittal.com>
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The TSI148 driver provides an optional mechanism for ensuring that errors
resulting from posted transfers are caught whilst still relevant. To do this
errors are stored in a link list. If bus errors are not checked, this list
would grow until available memory had been exhausted.
Only store the errors in a link list if error detection is switched on.
Reported-by: De Roo, Steven <steven.deroo@arcelormittal.com>
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the module_pci_driver() macro to make the code simpler
by eliminating module_init and module_exit calls.
dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the module_pci_driver() macro to make the code simpler
by eliminating module_init and module_exit calls.
dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since we will be removing items off the list using list_del() we need
to use a safer version of the list_for_each() macro aptly named
list_for_each_safe(). We should use the safe macro if the loop
involves deletions of items.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since we will be removing items off the list using list_del() we need
to use a safer version of the list_for_each() macro aptly named
list_for_each_safe().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The memcpy_fromio() and memcpy_toio() functions use the __memcpy() function,
at least on x86. This function carries out transfers smaller than 32 bits as
multiple 8 bit transfers, causing a single (aligned) 16 bit transfer to be
split into 2 8 bit transfers which may not be supported by the target VME
device.
The commit 53059aa059 fixed this for the
ca91cx42, however this was not fixed for the tsi148 at the time. This patch
uses the same algorithm to fix the tsi148.
Reported-by: Daniel Lambert <daniel.lambert@clermont.in2p3.fr>
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Functions not referenced outside of a source file should be marked
static to prevent them from being exposed globally.
Quiets the sparse warnings:
warning: symbol 'ca91cx42_alloc_consistent' was not declared. Should it be static?
warning: symbol 'ca91cx42_free_consistent' was not declared. Should it be static?
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Functions not referenced outside of a source file should be marked
static to prevent them from being exposed globally.
Quiets the sparse warnings:
warning: symbol 'tsi148_alloc_consistent' was not declared. Should it be static?
warning: symbol 'tsi148_free_consistent' was not declared. Should it be static?
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This moves the VME core, VME board drivers, and VME bridge drivers out
of the drivers/staging/vme/ area to drivers/vme/.
The VME device drivers have not moved out yet due to some API questions
they are still working through, that should happen soon, hopefully.
Cc: Martyn Welch <martyn.welch@ge.com>
Cc: Manohar Vanga <manohar.vanga@cern.ch>
Cc: Vincent Bossier <vincent.bossier@gmail.com>
Cc: "Emilio G. Cota" <cota@braap.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
