Memory allocated for 'name' was leaking if required binding properties
were not present.
The memory for 'name' was allocated early at probe with kasprintf(). It
was freed in error paths executed before and after parsing DTS but not
in that error path.
Fix the error path for parsing device tree properties.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Fixes: faffd234cf ("bq2415x_charger: Add DT support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
The power_supply_get_by_phandle() on error returns ENODEV or NULL.
The driver later expects obtained pointer to power supply to be
valid or NULL. If it is not NULL then it dereferences it in
bq2415x_notifier_call() which would lead to dereferencing ENODEV-value
pointer.
Properly handle the power_supply_get_by_phandle() error case by
replacing error value with NULL. This indicates that usb charger
detection won't be used.
Fix also memory leak of 'name' if power_supply_get_by_phandle() fails
with NULL and probe should defer.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Fixes: faffd234cf ("bq2415x_charger: Add DT support")
Cc: <stable@vger.kernel.org>
[small fix regarding the missing ti,usb-charger-detection info message]
Signed-off-by: Sebastian Reichel <sre@kernel.org>
This adds DT support to the bq2415x driver.
Signed-off-by: Sebastian Reichel <sre@debian.org>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
This patch removing set_mode_hook function from board data and replacing
it with new string variable of notifier power supply device. After this
change it is possible to add DT support because driver does not need
specific board function anymore. Only static data and name of power supply
device is required.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
As per the datasheets, maximum battery regulation voltage is 4440mV.
The formula is (voltage - offset) / step, so the maximum value is:
(4440 - 3500) / 20 = 47
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Thanks-to: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
Convert to the much saner new idr interface.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Anton Vorontsov <cbou@mail.ru>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Renamed mode BQ2415X_MODE_NONE to BQ2415X_MODE_OFF because this mode
turning chaging completly off
* Added new mode BQ2415X_MODE_NONE which enable charging with maximal
current limit 100mA (this is minimal safe value for bq2415x chips)
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
devm_kzalloc is device managed and makes error handling and code cleanup a
bit simpler.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
module_i2c_driver() makes the code simpler by eliminating module_init and
module_exit calls.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
I hate doing these style fixups myself, but I also hate inconsitent code.
Normally I just ask to resubmit the patch with the issues fixed, but N900
is special: I have a selfish interest in it. :)
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
The bq2415x charger driver is needed for example on Nokia N900 for
charging battery. Driver is part of open source project to replace
proprietary battery management.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
