reiserfs_iget() returns either NULL or error code in ERR_PTR. And we
were only checking for NULL, so in case of some other error we will try
to dereference the ERR_PTR(-errno) thinking it to be a valid pointer.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
rs->begin in ratelimit is set in two cases.
1) when rs->begin was not initialized
2) when rs->interval was passed
For case #2, current ratelimit sets the begin to 0. This incurrs
improper suppression. The begin value will be set in the next ratelimit
call by 1). Then the time interval check will be always false, and
rs->printed will not be initialized. Although enough time passed,
ratelimit may return 0 if rs->printed is not less than rs->burst. To
reset interval properly, begin should be jiffies rather than 0.
For an example code below:
static DEFINE_RATELIMIT_STATE(mylimit, 1, 1);
for (i = 1; i <= 10; i++) {
if (__ratelimit(&mylimit))
printk("ratelimit test count %d\n", i);
msleep(3000);
}
test result in the current code shows suppression even there is 3 seconds sleep.
[ 78.391148] ratelimit test count 1
[ 81.295988] ratelimit test count 2
[ 87.315981] ratelimit test count 4
[ 93.336267] ratelimit test count 6
[ 99.356031] ratelimit test count 8
[ 105.376367] ratelimit test count 10
Signed-off-by: Jaewon Kim <jaewon31.kim@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tetsuo Handa reported underflow of NR_MLOCK on munlock.
Testcase:
#include <stdio.h>
#include <stdlib.h>
#include <sys/mman.h>
#define BASE ((void *)0x400000000000)
#define SIZE (1UL << 21)
int main(int argc, char *argv[])
{
void *addr;
system("grep Mlocked /proc/meminfo");
addr = mmap(BASE, SIZE, PROT_READ | PROT_WRITE,
MAP_ANONYMOUS | MAP_PRIVATE | MAP_LOCKED | MAP_FIXED,
-1, 0);
if (addr == MAP_FAILED)
printf("mmap() failed\n"), exit(1);
munmap(addr, SIZE);
system("grep Mlocked /proc/meminfo");
return 0;
}
It happens on munlock_vma_page() due to unfortunate choice of nr_pages
data type:
__mod_zone_page_state(zone, NR_MLOCK, -nr_pages);
For unsigned int nr_pages, implicitly casted to long in
__mod_zone_page_state(), it becomes something around UINT_MAX.
munlock_vma_page() usually called for THP as small pages go though
pagevec.
Let's make nr_pages signed int.
Similar fixes in 6cdb18ad98 ("mm/vmstat: fix overflow in
mod_zone_page_state()") used `long' type, but `int' here is OK for a
count of the number of sub-pages in a huge page.
Fixes: ff6a6da60b ("mm: accelerate munlock() treatment of THP pages")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Michel Lespinasse <walken@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org> [4.4+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After THP refcounting rework we have only two possible return values
from pmd_trans_huge_lock(): success and failure. Return-by-pointer for
ptl doesn't make much sense in this case.
Let's convert pmd_trans_huge_lock() to return ptl on success and NULL on
failure.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Minchan Kim <minchan@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch is borrowed from x86 hpet driver and explaind below:
Due to the overly intelligent design of HPETs, we need to workaround
the problem that the compare value which we write is already behind
the actual counter value at the point where the value hits the real
compare register. This happens for two reasons:
1) We read out the counter, add the delta and write the result to the
compare register. When a NMI hits between the read out and the write
then the counter can be ahead of the event already.
2) The write to the compare register is delayed by up to two HPET
cycles in AMD chipsets.
We can work around this by reading back the compare register to make
sure that the written value has hit the hardware. But that is bad
performance wise for the normal case where the event is far enough in
the future.
As we already know that the write can be delayed by up to two cycles
we can avoid the read back of the compare register completely if we
make the decision whether the delta has elapsed already or not based
on the following calculation:
cmp = event - actual_count;
If cmp is less than 64 HPET clock cycles, then we decide that the event
has happened already and return -ETIME. That covers the above #1 and #2
problems which would cause a wait for HPET wraparound (~306 seconds).
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12162/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
When Core-0 handle SMP_ASK_C0COUNT IPI, we should make other cores to
see the result as soon as possible (especially when Store-Fill-Buffer
is enabled). Otherwise, C0_Count syncronization makes no sense.
BTW, array is more suitable than per-cpu variable for syncronization,
and there is a corner case should be avoid: C0_Count of Core-0 can be
really 0.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/12160/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
If GCC >= 4.9 and Binutils >=2.25, we use -march=loongson3a, otherwise
we use -march=mips64r2, this can slightly improve performance. Besides,
arch/mips/loongson64/Platform is a better location rather than arch/
mips/Makefile.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12161/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
In history, __arch_local_irq_restore() is only used by SMTC. However,
SMTC support has been removed since 3.16, this patch remove the unused
function.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12159/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
If the parameter given to the macro is replaced throughout the macro as
it is evaluated. The intent is that the macro parameter should replace
the only the first parameter to container_of(). However, the way the
macro was written, it would also inadvertantly replace a structure field
name. If a parameter of any other name is given to the macro, it will
fail to compile, if the structure does not contain a field of the same
name. At worst, it will compile, and hide improper access of an
unintended field in the structure.
Change the macro parameter name, so it does not conflict with the
structure field name.
Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
This adds support for AMD's PCI-Express Non-Transparent Bridge
(NTB) device on the Zeppelin platform. The driver connnects to the
standard NTB sub-system interface, with modification to add hooks
for power management in a separate patch. The AMD NTB device has 3
memory windows, 16 doorbell, 16 scratch-pad registers, and supports
up to 16 PCIe lanes running a Gen3 speeds.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Allen Hubbe <Allen.Hubbe@emc.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
it's "bugger off if we got ERR_PTR", not the other way round...
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Expose an interface to allow users to mark several accesses together as
being user space accesses, allowing batching of the surrounding user
space access markers (SMAP on x86, PAN on arm64, domain register
switching on arm).
This is currently only used for the user string lenth and copying
functions, where the SMAP overhead on x86 drowned the actual user
accesses (only noticeable on newer microarchitectures that support SMAP
in the first place, of course).
* user access batching branch:
Use the new batched user accesses in generic user string handling
Add 'unsafe' user access functions for batched accesses
x86: reorganize SMAP handling in user space accesses
I noticed that all the callers of this function pass cinfo->mds->list as
an argument in addition to the cinfo structure itself. Let's get rid of
the extra argument, since it doesn't seem to be adding anything.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When we hit 22 errors, we start to overflow the memory buffers allocated
to the LAYOUTRETURN errors. The issue is that currently, RPC call reply
ordering determines how successful we are in merging errors that refer
to contiguous READ or WRITE requests.
Fix is to use an insertion sort to help detect contiguity.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Merge third patch-bomb from Andrew Morton:
"I'm pretty much done for -rc1 now:
- the rest of MM, basically
- lib/ updates
- checkpatch, epoll, hfs, fatfs, ptrace, coredump, exit
- cpu_mask simplifications
- kexec, rapidio, MAINTAINERS etc, etc.
- more dma-mapping cleanups/simplifications from hch"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (109 commits)
MAINTAINERS: add/fix git URLs for various subsystems
mm: memcontrol: add "sock" to cgroup2 memory.stat
mm: memcontrol: basic memory statistics in cgroup2 memory controller
mm: memcontrol: do not uncharge old page in page cache replacement
Documentation: cgroup: add memory.swap.{current,max} description
mm: free swap cache aggressively if memcg swap is full
mm: vmscan: do not scan anon pages if memcg swap limit is hit
swap.h: move memcg related stuff to the end of the file
mm: memcontrol: replace mem_cgroup_lruvec_online with mem_cgroup_online
mm: vmscan: pass memcg to get_scan_count()
mm: memcontrol: charge swap to cgroup2
mm: memcontrol: clean up alloc, online, offline, free functions
mm: memcontrol: flatten struct cg_proto
mm: memcontrol: rein in the CONFIG space madness
net: drop tcp_memcontrol.c
mm: memcontrol: introduce CONFIG_MEMCG_LEGACY_KMEM
mm: memcontrol: allow to disable kmem accounting for cgroup2
mm: memcontrol: account "kmem" consumers in cgroup2 memory controller
mm: memcontrol: move kmem accounting code to CONFIG_MEMCG
mm: memcontrol: separate kmem code from legacy tcp accounting code
...
Pull overlayfs updates from Miklos Szeredi:
"This contains several bug fixes and a new mount option
'default_permissions' that allows read-only exported NFS
filesystems to be used as lower layer"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: check dentry positiveness in ovl_cleanup_whiteouts()
ovl: setattr: check permissions before copy-up
ovl: root: copy attr
ovl: move super block magic number to magic.h
ovl: use a minimal buffer in ovl_copy_xattr
ovl: allow zero size xattr
ovl: default permissions
Pull fuse updates from Miklos Szeredi:
"This adds SEEK_HOLE and SEEK_DATA support in lseek"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: add support for SEEK_HOLE and SEEK_DATA in lseek
This set of changes contains a new driver for OMAP (using the dual-mode
timers) as well as an assortment of fixes all across the board.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJWoOb9AAoJEN0jrNd/PrOh6e8P/2fIW49qBk1bSyzWZ8nI9ifx
rUz1hDpFaOwvOOp+JZ/PCF8l11hr99CpsfZm8tWp3J2lLsahDv362Bp235lOrZk2
aQ4MaKUAvfzcqmCkeoXFj1SJLgUacerpdWBklTQJpyqoT6bYoyY89fXtaVELI4jF
V65aSBKF2jh2BlEvmKiMa666xd2jAux59kLRhajJB4MUr2NY5aTmPa9oHZVGa1Qi
QXEjLp5elGnnIpzN4f7ZuIkgCOceB35HVJoRgGq068YZO2PZDNXn4GSXval85hRZ
eBHX0btkQ8itQ9IJz1gPtgOxnQuZO5k70bfNSMsG4CDJfNjwMAibFs7UfThnnPZK
aS7N5SMXt6Yt5H6OSGDR66emeyciYy/+8/0aToscuu1NiTxAUkGN//kEv4IPABn8
DMWm78PvaxVlZzXLKUkWYPgT7kjvnFQRzopQjmMtY15FUU28cpd+CZqlMlGJ4tCh
EIA6g6v16BnYyfNI8ZcffoTsfJ7B7uKUnEMiD/gGJ5OrYl8GRT/dvpsX51/hkiQS
o/vD2aokpEcnY/1mHSQAWdEuwcV9UVi3pplfhRLk1OkJylBc19JUbqbRY9Mx5p5S
yhgGMZ5tf0jraevr1qy5h0pZXZkQlbykZT2ljDW+BhbpgHyHInF0Rkib+FzUWcb1
LBsqAkqpBcGKhx4vUKvy
=YH/K
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This set of changes contains a new driver for OMAP (using the
dual-mode timers) as well as an assortment of fixes all across the
board"
* tag 'pwm/for-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: Mark all devices as "might sleep"
pwm: omap-dmtimer: Potential NULL dereference on error
pwm: add HAS_IOMEM dependency to PWM_FSL_FTM
pwm: Add PWM driver for OMAP using dual-mode timers
pwm: rcar: Improve accuracy of frequency division setting
pwm: lpc32xx: return ERANGE, if requested period is not supported
pwm: lpc32xx: fix and simplify duty cycle and period calculations
pwm: lpc32xx: make device usable with common clock framework
pwm: lpc32xx: correct number of PWM channels from 2 to 1
dt: lpc32xx: pwm: update documentation of LPC32xx PWM device
dt: lpc32xx: pwm: correct LPC32xx PWM device node example
pwm: fsl-ftm: Fix clock enable/disable when using PM
pwm: lpss: Rework the sequence of programming PWM_SW_UPDATE
pwm: lpss: Select core part automatically
pwm: lpss: Update PWM setting for Broxton
pwm: bcm2835: Fix email address specification
pwm: bcm2835: Prevent division by zero
pwm: bcm2835: Calculate scaler in ->config()
pwm: lpss: Remove ->free() callback
MClientMount{,Ack} are long gone. The receipt of bare monmap doesn't
actually indicate a mount success as we are yet to authenticate at that
point in time.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
With it gone, no need to preserve ceph_timespec in process_one_ticket()
either.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
If we fault due to authentication, we invalidate the service ticket we
have and request a new one - the idea being that if a service rejected
our authorizer, it must have expired, despite mon_client's attempts at
periodic renewal. (The other possibility is that our ticket is too new
and the service hasn't gotten it yet, in which case invalidating isn't
necessary but doesn't hurt.)
Invalidating just the service ticket is not enough, though. If we
assume a failure on mon_client's part to renew a service ticket, we
have to assume the same for the AUTH ticket. If our AUTH ticket is
bad, we won't get any service tickets no matter how hard we try, so
invalidate AUTH ticket along with the service ticket.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Back in 2013, commit 4b8e8b5d78 ("libceph: fix authorizer
invalidation") tried to fix authorizer invalidation issues by clearing
validity field. However, nothing ever consults this field, so it
doesn't force us to request any new secrets in any way and therefore we
never get out of the exponential backoff mode:
[ 129.973812] libceph: osd2 192.168.122.1:6810 connect authorization failure
[ 130.706785] libceph: osd2 192.168.122.1:6810 connect authorization failure
[ 131.710088] libceph: osd2 192.168.122.1:6810 connect authorization failure
[ 133.708321] libceph: osd2 192.168.122.1:6810 connect authorization failure
[ 137.706598] libceph: osd2 192.168.122.1:6810 connect authorization failure
...
AFAICT this was the case at the time 4b8e8b5d78 was merged, too.
Using timespec solely as a bool isn't nice, so introduce a new have_key
flag, specifically for this purpose.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Commit 20e55c4cc7 ("libceph: clear messenger auth_retry flag when we
authenticate") got us only half way there. We clear the flag if the
second attempt succeeds, but it also needs to be cleared if that
attempt fails, to allow for the exponential backoff to kick in.
Otherwise, if ->should_authenticate() thinks our keys are valid, we
will busy loop, incrementing auth_retry to no avail:
process_connect ffff880079a63830 got BADAUTHORIZER attempt 1
process_connect ffff880079a63830 got BADAUTHORIZER attempt 2
process_connect ffff880079a63830 got BADAUTHORIZER attempt 3
process_connect ffff880079a63830 got BADAUTHORIZER attempt 4
process_connect ffff880079a63830 got BADAUTHORIZER attempt 5
...
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
There are a number of problems with revoking a "was sending" message:
(1) We never make any attempt to revoke data - only kvecs contibute to
con->out_skip. However, once the header (envelope) is written to the
socket, our peer learns data_len and sets itself to expect at least
data_len bytes to follow front or front+middle. If ceph_msg_revoke()
is called while the messenger is sending message's data portion,
anything we send after that call is counted by the OSD towards the now
revoked message's data portion. The effects vary, the most common one
is the eventual hang - higher layers get stuck waiting for the reply to
the message that was sent out after ceph_msg_revoke() returned and
treated by the OSD as a bunch of data bytes. This is what Matt ran
into.
(2) Flat out zeroing con->out_kvec_bytes worth of bytes to handle kvecs
is wrong. If ceph_msg_revoke() is called before the tag is sent out or
while the messenger is sending the header, we will get a connection
reset, either due to a bad tag (0 is not a valid tag) or a bad header
CRC, which kind of defeats the purpose of revoke. Currently the kernel
client refuses to work with header CRCs disabled, but that will likely
change in the future, making this even worse.
(3) con->out_skip is not reset on connection reset, leading to one or
more spurious connection resets if we happen to get a real one between
con->out_skip is set in ceph_msg_revoke() and before it's cleared in
write_partial_skip().
Fixing (1) and (3) is trivial. The idea behind fixing (2) is to never
zero the tag or the header, i.e. send out tag+header regardless of when
ceph_msg_revoke() is called. That way the header is always correct, no
unnecessary resets are induced and revoke stands ready for disabled
CRCs. Since ceph_msg_revoke() rips out con->out_msg, introduce a new
"message out temp" and copy the header into it before sending.
Cc: stable@vger.kernel.org # 4.0+
Reported-by: Matt Conner <matt.conner@keepertech.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Tested-by: Matt Conner <matt.conner@keepertech.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Use list_for_each_entry_safe() instead of list_for_each_safe() to
simplify the code.
Signed-off-by: Geliang Tang <geliangtang@163.com>
[idryomov@gmail.com: nuke call to list_splice_init() as well]
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Cap message from MDS can update i_size. In that case, we don't
hold i_mutex. So it's unsafe to directly access inode->i_size
while holding i_mutex.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
When receiving -EOLDSNAP from OSD, we need to re-send corresponding
write request. Due to locking issue, we can send new request inside
another OSD request's complete callback. So we use worker to re-send
request for AIO write.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
The basic idea of AIO support is simple, just call kiocb::ki_complete()
in OSD request's complete callback. But there are several special cases.
when IO span multiple objects, we need to wait until all OSD requests
are complete, then call kiocb::ki_complete(). Error handling in this case
is tricky too. For simplify, AIO both span multiple objects and extends
i_size are not allowed.
Another special case is check EOF for reading (other client can write to
the file and extend i_size concurrently). For simplify, the direct-IO/AIO
code path does do the check, fallback to normal syn read instead.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
The variant pagep will still get the invalid page point, although ceph
fails in function ceph_update_writeable_page.
To fix this issue, Assigne the page to pagep until there is no failure
in function ceph_update_writeable_page.
Signed-off-by: Minfei Huang <mnfhuang@gmail.com>
Signed-off-by: Yan, Zheng <zyan@redhat.com>
ceph_update_writeable_page() unlocks the page on errors, so
page_mkwrite() should not unlock the page again.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
The rbd_dev_destroy() function tests whether its argument is NULL
and then returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
list_next_entry has been defined in list.h, so I replace list_entry_next
with it.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This patch makes ceph_frag_contains_value return bool to improve
readability due to this particular function only using either one or
zero as its return value.
No functional change.
Signed-off-by: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Signed-off-by: Yan, Zheng <zyan@redhat.com>
These functions were introduced in commit 3d14c5d2b ("ceph: factor
out libceph from Ceph file system"). Howover, there's no user of
these functions since then, so remove them for simplicity.
Signed-off-by: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Signed-off-by: Yan, Zheng <zyan@redhat.com>
The create_cq() can receive creation flags which were used
differently by two commits which added create_cq extended
command and cross-channel. The merged code caused to not
accept any flags at all.
This patch unifies the check into one function and one return
error code.
Fixes: 972ecb8213 ("IB/mlx5: Add create_cq extended command")
Fixes: 051f263098 ("IB/mlx5: Add driver cross-channel support")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Added Raw Packet QP modify functionality which will enable user
space consumers to use it.
Since Raw Packet QP is built of SQ and RQ sub-objects, therefore
Raw Packet QP state changes are implemented by changing the state
of the sub-objects.
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When modifying a QP, the desired operation was determined in
the mlx5_core using a transition table that takes the current
state, the final state, and returns the desired operation.
Since this logic will be used for Raw Packet QP, move the
operation table to the mlx5_ib.
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When the user changes the Address Vector(AV) in the modify QP, he
provides an SL. This SL should be translated to Ethernet Priority
by taking the 3 LSB bits, and modify the QP's TIS according to this
Ethernet priority.
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Since Raw Packet QP is composed of RQ and SQ, the IB QP's
state is derived from the sub-objects. Therefore we need
to query each one of the sub-objects, and decide on the
IB QP's state.
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds support for Raw Packet QP for the mlx5 device.
Raw Packet QP, unlike other QP types, has no matching mlx5_core_qp
object but rather it is built of RQ/SQ/TIR/TIS/TD mlx5_core object.
Since the SQ and RQ work-queue (WQ) buffers are not contiguous like
other QPs, we allocate separate buffers in the user-space and pass
the address of each one of them separately to the kernel.
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Extract specific IB QP fields to mlx5_ib_qp_trans structure.
The mlx5_core QP object resides in mlx5_ib_qp_base, which all QP types
inherit from. When we need to find mlx5_ib_qp using mlx5_core QP
(event handling and co), we use a pointer that resides in
mlx5_ib_qp_base.
In addition, we delete all redundant fields that weren't used anywhere
in the code:
-doorbell_qpn
-sq_max_wqes_per_wr
-sq_spare_wqes
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Transport Domain groups several TIS and TIR object. By grouping
these object, it defines wheather local loopback packets that
are sent from the TIS objects in the group are received by the
TIR objects in the same group.
Allocate a Transport Domain(TD) for each user context to be used
in the future by Raw Packet QP for Self-Loopback Control.
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When an event arrives on QP/RQ/SQ, check whether it's supported,
and print a warning message otherwise.
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
RQ/SQ will be used to implement IB verbs QPs, so the IB QP affiliated
events are affiliated also with SQs and RQs.
Since SQ, RQ and QP resource numbers do not share the same name
space, a queue type field was added to the event data to specify
the SW object that the event is affiliated with.
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
To be used by mlx5_ib in the following patches for implementing
RAW PACKET QP.
Add mlx5_core_ prefix to alloc and delloc transport_domain since
they are exposed now.
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Per user context, work with CQE version that both the user-space
and the kernel support. Report this CQE version via the response of
the alloc_ucontext command.
Signed-off-by: Haggai Abramovsky <hagaya@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
