The increment and decrement was inherited from previous version that
used atomics, switched in commit 06297d8cef ("btrfs: switch
extent_buffer blocking_writers from atomic to int"). The only possible
values are 0 and 1 so we can set them directly.
The generated assembly (gcc 9.x) did the direct value assignment in
btrfs_set_lock_blocking_write (asm diff after change in 06297d8cef):
5d: test %eax,%eax
5f: je 62 <btrfs_set_lock_blocking_write+0x22>
61: retq
- 62: lock incl 0x44(%rdi)
- 66: add $0x50,%rdi
- 6a: jmpq 6f <btrfs_set_lock_blocking_write+0x2f>
+ 62: movl $0x1,0x44(%rdi)
+ 69: add $0x50,%rdi
+ 6d: jmpq 72 <btrfs_set_lock_blocking_write+0x32>
The part in btrfs_tree_unlock did a decrement because
BUG_ON(blockers > 1) is probably not a strong hint for the compiler, but
otherwise the output looks safe:
- lock decl 0x44(%rdi)
+ sub $0x1,%eax
+ mov %eax,0x44(%rdi)
Signed-off-by: David Sterba <dsterba@suse.com>
There are two ifs that use eb::blocking_writers. As this is a variable
modified inside and outside of locks, we could minimize number of
accesses to avoid problems with getting different results at different
times.
The access here is locked so this can only race with btrfs_tree_unlock
that sets blocking_writers to 0 without lock and unsets the lock owner.
The first branch is taken only if the same thread already holds the
lock, the second if checks for blocking writers. Here we'd either unlock
and wait, or proceed. Both are valid states of the locking protocol.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
When there are no raid1c3 or raid1c4 block groups left after balance
(either convert or with other filters applied), remove the incompat bit.
This is already done for RAID56, do the same for RAID1C34.
Signed-off-by: David Sterba <dsterba@suse.com>
The new raid1c3 and raid1c4 profiles are backward incompatible and the
name shall be 'raid1c34', the status can be found in the global
supported features in /sys/fs/btrfs/features or in the per-filesystem
directory.
Signed-off-by: David Sterba <dsterba@suse.com>
Add new block group profile to store 4 copies in a simliar way that
current RAID1 does. The profile attributes and constraints are defined
in the raid table and used by the same code that already handles the 2-
and 3-copy RAID1.
The minimum number of devices is 4, the maximum number of devices/chunks
that can be lost/damaged is 3. There is no comparable traditional RAID
level, the profile is added for future needs to accompany triple-parity
and beyond.
Signed-off-by: David Sterba <dsterba@suse.com>
Add new block group profile to store 3 copies in a simliar way that
current RAID1 does. The profile attributes and constraints are defined
in the raid table and used by the same code that already handles the
2-copy RAID1.
The minimum number of devices is 3, the maximum number of devices/chunks
that can be lost/damaged is 2. Like RAID6 but with 33% space
utilization.
Signed-off-by: David Sterba <dsterba@suse.com>
In commit "Btrfs: use REQ_CGROUP_PUNT for worker thread submitted bios",
cow_file_range_async gained wbc as a parameter and this makes passing
write flags redundant. Set it inside the function and remove the
parameter.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
__extent_writepage reads write flags from wbc and passes both to
__extent_writepage_io. This makes write_flags redundant and we can
remove it.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Backreference walking, which is used by send to figure if it can issue
clone operations instead of write operations, can be very slow and use
too much memory when extents have many references. This change simply
skips backreference walking when an extent has more than 64 references,
in which case we fallback to a write operation instead of a clone
operation. This limit is conservative and in practice I observed no
signicant slowdown with up to 100 references and still low memory usage
up to that limit.
This is a temporary workaround until there are speedups in the backref
walking code, and as such it does not attempt to add extra interfaces or
knobs to tweak the threshold.
Reported-by: Atemu <atemu.main@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CAE4GHgkvqVADtS4AzcQJxo0Q1jKQgKaW3JGp3SGdoinVo=C9eQ@mail.gmail.com/T/#me55dc0987f9cc2acaa54372ce0492c65782be3fa
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For send we currently skip clone operations when the source and
destination files are the same. This is so because clone didn't support
this case in its early days, but support for it was added back in May
2013 by commit a96fbc7288 ("Btrfs: allow file data clone within a
file"). This change adds support for it.
Example:
$ mkfs.btrfs -f /dev/sdd
$ mount /dev/sdd /mnt/sdd
$ xfs_io -f -c "pwrite -S 0xab -b 64K 0 64K" /mnt/sdd/foobar
$ xfs_io -c "reflink /mnt/sdd/foobar 0 64K 64K" /mnt/sdd/foobar
$ btrfs subvolume snapshot -r /mnt/sdd /mnt/sdd/snap
$ mkfs.btrfs -f /dev/sde
$ mount /dev/sde /mnt/sde
$ btrfs send /mnt/sdd/snap | btrfs receive /mnt/sde
Without this change file foobar at the destination has a single 128Kb
extent:
$ filefrag -v /mnt/sde/snap/foobar
Filesystem type is: 9123683e
File size of /mnt/sde/snap/foobar is 131072 (32 blocks of 4096 bytes)
ext: logical_offset: physical_offset: length: expected: flags:
0: 0.. 31: 0.. 31: 32: last,unknown_loc,delalloc,eof
/mnt/sde/snap/foobar: 1 extent found
With this we get a single 64Kb extent that is shared at file offsets 0
and 64K, just like in the source filesystem:
$ filefrag -v /mnt/sde/snap/foobar
Filesystem type is: 9123683e
File size of /mnt/sde/snap/foobar is 131072 (32 blocks of 4096 bytes)
ext: logical_offset: physical_offset: length: expected: flags:
0: 0.. 15: 3328.. 3343: 16: shared
1: 16.. 31: 3328.. 3343: 16: 3344: last,shared,eof
/mnt/sde/snap/foobar: 2 extents found
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When deleting large files (which cross block group boundary) with
discard mount option, we find some btrfs_discard_extent() calls only
trimmed part of its space, not the whole range:
btrfs_discard_extent: type=0x1 start=19626196992 len=2144530432 trimmed=1073741824 ratio=50%
type: bbio->map_type, in above case, it's SINGLE DATA.
start: Logical address of this trim
len: Logical length of this trim
trimmed: Physically trimmed bytes
ratio: trimmed / len
Thus leaving some unused space not discarded.
[CAUSE]
When discard mount option is specified, after a transaction is fully
committed (super block written to disk), we begin to cleanup pinned
extents in the following call chain:
btrfs_commit_transaction()
|- btrfs_finish_extent_commit()
|- find_first_extent_bit(unpin, 0, &start, &end, EXTENT_DIRTY);
|- btrfs_discard_extent()
However, pinned extents are recorded in an extent_io_tree, which can
merge adjacent extent states.
When a large file gets deleted and it has adjacent file extents across
block group boundary, we will get a large merged range like this:
|<--- BG1 --->|<--- BG2 --->|
|//////|<-- Range to discard --->|/////|
To discard that range, we have the following calls:
btrfs_discard_extent()
|- btrfs_map_block()
| Returned bbio will end at BG1's end. As btrfs_map_block()
| never returns result across block group boundary.
|- btrfs_issuse_discard()
Issue discard for each stripe.
So we will only discard the range in BG1, not the remaining part in BG2.
Furthermore, this bug is not that reliably observed, for above case, if
there is no other extent in BG2, BG2 will be empty and btrfs will trim
all space of BG2, covering up the bug.
[FIX]
- Allow __btrfs_map_block_for_discard() to modify @length parameter
btrfs_map_block() uses its @length paramter to notify the caller how
many bytes are mapped in current call.
With __btrfs_map_block_for_discard() also modifing the @length,
btrfs_discard_extent() now understands when to do extra trim.
- Call btrfs_map_block() in a loop until we hit the range end Since we
now know how many bytes are mapped each time, we can iterate through
each block group boundary and issue correct trim for each range.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The old code goes:
offset = logical - em->start;
length = min_t(u64, em->len - offset, length);
Where @length calculation is dependent on offset, it can take reader
several more seconds to find it's just the same code as:
offset = logical - em->start;
length = min_t(u64, em->start + em->len - logical, length);
Use above code to make the length calculate independent from other
variable, thus slightly increase the readability.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In check_extent_data_item(), we read file extent type without verifying
if the item size is valid.
Add such check to ensure the file extent type we read is correct.
The check is not as accurate as we need to cover both inline and regular
extents, so it only checks if the item size is larger or equal to inline
header.
So the existing size checks on inline/regular extents are still needed.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The "&fs_info->dev_replace.rwsem" and "&dev_replace->rwsem" refer to
the same lock but Smatch is not clever enough to figure that out so it
leads to static checker warnings. It's better to use it consistently
anyway.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The backup_root_index member stores the index at which the backup root
should be saved upon next transaction commit. However, there is a
small deviation from this behavior in the form of a check in
backup_super_roots which checks if current root generation equals to the
generation of the previous root. This can trigger in the following
scenario:
slot0: gen-2
slot1: gen-1
slot2: gen
slot3: unused
Now suppose slot3 (which is also the root specified in the super block)
is corrupted hence init_tree_roots chooses to use the backup root at
slot2, meaning read_backup_root will read slot2 and assign the
superblock generation to gen-1. Despite this backup_root_index will
point at slot3 because its init happens in init_backup_root_slot, long
before any parsing of the backup roots occur. Then on next transaction
start, gen-1 will be incremented by 1 making the root's generation
equal gen. Subsequently, on transaction commit the following check
triggers:
if (btrfs_backup_tree_root_gen(root_backup) ==
btrfs_header_generation(info->tree_root->node))
This causes the 'next_backup', which is the index at which the backup is
going to be written to, to set to last_backup, which will be slot2.
All of this is a very confusing way of expressing the following
invariant:
Always write a backup root at the index following the last used backup
root.
This commit streamlines this logic by setting backup_root_index to the
next index after the one used for mount.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The old name name was an awful misnomer because it didn't really find
the oldest super backup per-se but rather its slot. For example if we
have:
slot0: gen - 2
slot1: gen - 1
slot2: gen
slot3: empty
init_backup_root_slot will return slot3 and not slot0.
The new name is more appropriate since the function doesn't care whether
there is a valid backup in the returned slot or not.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function has been superseded by previous commits and is no longer
used so just remove it.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since the filesystem is not well formed and no trees are loaded it's
pointless holding the objectid_mutex. Just remove its usage.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The code responsible for reading and initializing tree roots is
scattered in open_ctree among 2 labels, emulating a loop. This is rather
confusing to reason about. Instead, factor the code to a new function,
init_tree_roots which implements the same logical flow.
There are a couple of notable differences, namely:
* Instead of using next_backup_root it's using the newly introduced
read_backup_root.
* If read_backup_root returns an error init_tree_roots propagates the
error and there is no special handling of that case e.g. the code jumps
straight to 'fail_tree_roots' label. The old code, however, was
(erroneously) jumping to 'fail_block_groups' label if next_backup_root
did fail, this was unnecessary since the tree roots init logic doesn't
modify the state of block groups.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function will replace next_root_backup with a much saner/cleaner
interface.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's no longer needed following cleanups around find_newest_backup_root
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Backup roots are always written in a circular manner. By definition we
can only ever have 1 backup root whose generation equals to that of the
superblock. Hence, the 'if' in the for loop will trigger at most once.
This is sufficient to return the newest backup root.
Furthermore the newest_gen parameter is always set to the generation of
the superblock. This value can be obtained from the fs_info.
This patch removes the unnecessary code dealing with the wraparound
case and makes 'newest_gen' a local variable.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The inode delalloc mutex was added a long time ago by commit f248679e86
("Btrfs: add a delalloc mutex to inodes for delalloc reservations"), and
the reason for its introduction is not very clear from the change log. It
claims it solves bogus warnings from lockdep, however it lacks an example
report/warning from lockdep, or any explanation.
Since we have enough concurrentcy protection from the locks of the space
info and block reserve objects, and such lockdep warnings don't seem to
exist anymore (at least on a 5.3 kernel I couldn't get them with fstests,
ltp, fs_mark, etc), remove it, simplifying things a bit and decreasing
the size of the btrfs_inode structure. With some quick fio tests doing
direct IO and mmap writes I couldn't observe any significant performance
increase either (direct IO writes that don't increase the file's size
don't hold the inode's lock for their entire duration and mmap writes
don't hold the inode's lock at all), which are the only type of writes
that could see any performance gain due to less serialization.
Review feedback from Josef:
The problem was taking the i_mutex in mmap, which is how I was
protecting delalloc reservations originally. The delalloc mutex didn't
come with all of the other dependencies. That's what the lockdep
messages were about, removing the lock isn't going to make them appear
again.
We _had_ to lock around this because we used to do tricks to keep from
over-reserving, and if we didn't serialize delalloc reservations we'd
end up with ugly accounting problems when we tried to clean things up.
However with my recentish changes this isn't the case anymore. Every
operation is responsible for reserving its space, and then adding it to
the inode. Then cleaning up is straightforward and can't be mucked up
by other users. So we no longer need the delalloc mutex to safe us from
ourselves.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It is not used anymore since commit 957780eb27 ("Btrfs: introduce
ticketed enospc infrastructure"), so just remove it.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs_statfs() we cache fs_info::space_info in a local variable only
to use it once in a list_for_each_rcu() statement.
Not only is the local variable unnecessary it even makes the code harder
to follow as it's not clear which list it is iterating.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The on-disk format of block group item makes use of the key that stores
the offset and length. This is further used in the code, although this
makes thing harder to understand. The key is also packed so the
offset/length is not properly aligned as u64.
Add start (key.objectid) and length (key.offset) members to block group
and remove the embedded key. When the item is searched or written, a
local variable for key is used.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Accessors defined by BTRFS_SETGET_FUNCS take a raw extent buffer and
manipulate the items there, there's no special prefix required. The
block group accessors had _disk_ because previously the names were
occupied by the on-stack accessors. As this has been addressed in the
previous patch, we can now unify the naming.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All accessors defined by BTRFS_SETGET_STACK_FUNCS contain _stack_ in the
name, the block group ones were not following that scheme, so let's
switch them.
Signed-off-by: David Sterba <dsterba@suse.com>
The members ::used and ::flags are now in the block group cache
structure, the last one is chunk_objectid, but that's set to a fixed
value and otherwise unused. The item is constructed from a local
variable before write, so we can remove the embedded one from block
group.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The flags are read from the item that's embedded to block group struct,
but the item will be removed. Use the ::flags after read and before
write.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For unknown reasons, the member 'used' in the block group struct is
stored in the b-tree item and accessed everywhere using the special
accessor helper. Let's unify it and make it a regular member and only
update the item before writing it to the tree.
The item is still being used for flags and chunk_objectid, there's some
duplication until the item is removed in following patches.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The last user of btrfs_bio::flags was removed in commit 326e1dbb57
("block: remove management of bi_remaining when restoring original
bi_end_io"), remove it.
(Tagged for stable as the structure is heavily used and space savings
are desirable.)
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently all the checksum algorithms generate a fixed size digest size
and we use it. The on-disk format can hold up to BTRFS_CSUM_SIZE bytes
and BLAKE2b produces digest of 512 bits by default. We can't do that and
will use the blake2b-256, this needs to be passed to the crypto API.
Separate that from the base algorithm name and add a member to request
specific driver, in this case with the digest size.
The only place that uses the driver name is the crypto API setup.
Signed-off-by: David Sterba <dsterba@suse.com>
Show the used driver for the checksum algorithm for the filesystem in
sysfs file /sys/fs/btrfs/UUID/features/checksum, eg.
crc32c (crc32c-generic)
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Export supported checksum algorithms via sysfs in the list of static
features:
/sys/fs/btrfs/features/supported_checksums
Space spearated list of checksum algorithm names.
Co-developed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Add sha256 to the list of possible checksumming algorithms used by BTRFS.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add xxhash64 to the list of possible checksumming algorithms used by
BTRFS.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
To remove use of extent_map::bdev we need to find a replacement, and the
latest_bdev is the only one we can use here, because inode::i_bdev and
superblock::s_bdev are NULL.
The DIO code uses bdev in two places:
* to read blocksize to perform alignment checks in
do_blockdev_direct_IO, but we do them in btrfs code before any call to
DIO
* in the following call chain:
do_direct_IO
get_more_blocks
sdio->get_block() <-- this is btrfs_get_blocks_direct
subsequently the map_bh->b_dev member is used in clean_bdev_aliases
and dio_new_bio to set the bio's bdev to that of the buffer_head.
However, because we have provided a submit function dio_bio_submit
calls our submission function and ignores the bdev.
So it's safe to pass any valid bdev that's used within the filesystem.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is a preparatory patch for removing extent_map::bdev. There's some
history behind the code so this is only precaution to catch if things
break before the actual removal happens.
Logically, comparing a raw low-level block device (bdev) does not make
sense for extent maps (high-level objects). This had no effect in
practice but was quite confusing in the code. The lookup_map is set iff
EXTENT_FLAG_FS_MAPPING is set.
The two pointers were stored in the same bytes and used potentially in
two meanings. Now they're split, so the asserts are in place to check
that the condition will not change.
The lookup map pointer misused bdev, this has been changed in commit
95617d6932 ("btrfs: cleanup, stop casting for extent_map->lookup
everywhere") to the explicit type. But the semantics hasn't changed and
bdev was not actually used to decide if maps are mergeable.
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of checking if we've read a BTRFS_CHUNK_ITEM_KEY from disk and
then process it we could just bail out early if the read disk key wasn't
a BTRFS_CHUNK_ITEM_KEY.
This removes a level of indentation and makes the code nicer to read.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs_may_alloc_data_chunk() we're checking if the chunk type is of
type BTRFS_BLOCK_GROUP_DATA and if it is we process it.
Instead of checking if the chunk type is a BTRFS_BLOCK_GROUP_DATA chunk
we can negate the check and bail out early if it isn't.
This makes the code a bit more readable.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In lock_stripe_add() we're caching the bucket for the stripe hash table
just for a single call to dereference the stripe hash.
If we just directly call rbio_bucket() we can safe the pointless local
variable.
Also move the dereferencing of the stripe hash outside of the variable
declaration block to not break over the 80 characters limit.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In lock_stripe_add() we're traversing the stripe hash list and check if
the current list element's raid_map equals is equal to the raid bio's
raid_map. If both are equal we continue processing.
If we'd check for inequality instead of equality we can reduce one level
of indentation.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of using an input pointer parameter as the return value and have
an int as the return type of find_desired_extent, rework the function to
directly return the found offset. Doing that the 'ret' variable in
btrfs_llseek_file can be removed. Additional (subjective) benefit is
that btrfs' llseek function now resemebles those of the other major
filesystems.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Handle SEEK_END/SEEK_CUR in a single 'default' case by directly
returning from generic_file_llseek. This makes the 'out' label
redundant. Finally return directly the vale from vfs_setpos. No
semantic changes.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Modifying the file position is done on a per-file basis. This renders
holding the inode lock for writing useless and makes the performance of
concurrent llseek's abysmal.
Fix this by holding the inode for read. This provides protection against
concurrent truncates and find_desired_extent already includes proper
extent locking for the range which ensures proper locking against
concurrent writes. SEEK_CUR and SEEK_END can be done lockessly.
The former is synchronized by file::f_lock spinlock. SEEK_END is not
synchronized but atomic, but that's OK since there is not guarantee that
SEEK_END will always be at the end of the file in the face of tail
modifications.
This change brings ~82% performance improvement when doing a lot of
parallel fseeks. The workload essentially does:
for (d=0; d<num_seek_read; d++)
{
/* offset %= 16777216; */
fseek (f, 256 * d % 16777216, SEEK_SET);
fread (buffer, 64, 1, f);
}
Without patch:
num workprocesses = 16
num fseek/fread = 8000000
step = 256
fork 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
real 0m41.412s
user 0m28.777s
sys 2m16.510s
With patch:
num workprocesses = 16
num fseek/fread = 8000000
step = 256
fork 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
real 0m11.479s
user 0m27.629s
sys 0m21.040s
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We can infer the ops from the type that is now passed to all functions
that would need it, this makes workspace_manager::ops redundant and can
be removed.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Replace indirect calls to free_workspace by switch and calls to the
specific callbacks. This is mainly to get rid of the indirection due to
spectre vulnerability mitigations.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We can infer the workspace_manager from type and the type will be used
in the following patch to call a common helper for free_workspace.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Replace indirect calls to alloc_workspace by switch and calls to the
specific callbacks. This is mainly to get rid of the indirection due to
spectre vulnerability mitigations.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We can infer the workspace_manager from type and the type will be used
in the following patch to call a common helper for alloc_workspace.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Similar to get_workspace, majority of the callbacks is trivial, we don't
gain anything by the indirection, so replace them by a switch function.
Trivial callback implementations use the helper.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Majority of the callbacks is trivial, we don't gain anything by the
indirection, so replace them by a switch function.
ZLIB needs to adjust level in the callback and ZSTD workspace management
is complex, the rest is call to the helper.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The indirect calls will be replaced by a switch in compression.c.
(Switch is faster than indirect calls with when Spectre mitigations are
enabled).
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Replace loop calling to all algos with a list of direct calls to the
cleanup manager callback. When that becomes trivial it is replaced by
direct call to the helper.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With the access to the workspace structures, we can look it up together
with the compression ops inside the workspace manager cleanup helper.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Replace loop calling to all algos with a list of direct calls to the
init manager callback. When that becomes trivial it is replaced by
direct call to the helper.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With the access to the workspace structures, we can look it up together
with the compression ops inside the workspace manager init helper.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's a lot of indirection when the generic code calls into
algo-specific callbacks to reach the private workspace manager structure
and back to the generic code.
To simplify that, export the workspace manager for heuristic, LZO and
ZLIB, while ZSTD is going to use it's own manager.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The indirect calls bring some overhead due to spectre vulnerability
mitigations. The number of cases is small and below the threshold
(10-20) where indirect call would be better.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Export compress_pages, decompress_bio and decompress callbacks for all
compression algos. The indirect calls will be replaced by a switch.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When free'ing extents in a block group we check to see if the block
group is not cached, and then cache it if we need to. However we'll
just carry on as long as we're loading the cache. This is problematic
because we are dirtying the block group here. If we are fast enough we
could do a transaction commit and clear the free space cache while we're
still loading the space cache in another thread. This truncates the
free space inode, which will keep it from loading the space cache.
Fix this by using the btrfs_block_group_cache_done helper so that we try
to load the space cache unconditionally here, which will result in the
caller waiting for the fast caching to complete and keep us from
truncating the free space inode.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While testing 5.2 we ran into the following panic
[52238.017028] BUG: kernel NULL pointer dereference, address: 0000000000000001
[52238.105608] RIP: 0010:drop_buffers+0x3d/0x150
[52238.304051] Call Trace:
[52238.308958] try_to_free_buffers+0x15b/0x1b0
[52238.317503] shrink_page_list+0x1164/0x1780
[52238.325877] shrink_inactive_list+0x18f/0x3b0
[52238.334596] shrink_node_memcg+0x23e/0x7d0
[52238.342790] ? do_shrink_slab+0x4f/0x290
[52238.350648] shrink_node+0xce/0x4a0
[52238.357628] balance_pgdat+0x2c7/0x510
[52238.365135] kswapd+0x216/0x3e0
[52238.371425] ? wait_woken+0x80/0x80
[52238.378412] ? balance_pgdat+0x510/0x510
[52238.386265] kthread+0x111/0x130
[52238.392727] ? kthread_create_on_node+0x60/0x60
[52238.401782] ret_from_fork+0x1f/0x30
The page we were trying to drop had a page->private, but had no
page->mapping and so called drop_buffers, assuming that we had a
buffer_head on the page, and then panic'ed trying to deref 1, which is
our page->private for data pages.
This is happening because we're truncating the free space cache while
we're trying to load the free space cache. This isn't supposed to
happen, and I'll fix that in a followup patch. However we still
shouldn't allow those sort of mistakes to result in messing with pages
that do not belong to us. So add the page->mapping check to verify that
we still own this page after dropping and re-acquiring the page lock.
This page being unlocked as:
btrfs_readpage
extent_read_full_page
__extent_read_full_page
__do_readpage
if (!nr)
unlock_page <-- nr can be 0 only if submit_extent_page
returns an error
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
[ add callchain ]
Signed-off-by: David Sterba <dsterba@suse.com>
In the fixup worker, if we fail to mark the range as delalloc in the io
tree, we must release the previously reserved metadata, as well as update
the outstanding extents counter for the inode, otherwise we leak metadata
space.
In pratice we can't return an error from btrfs_set_extent_delalloc(),
which is just a wrapper around __set_extent_bit(), as for most errors
__set_extent_bit() does a BUG_ON() (or panics which hits a BUG_ON() as
well) and returning an -EEXIST error doesn't happen in this case since
the exclusive bits parameter always has a value of 0 through this code
path. Nevertheless, just fix the error handling in the fixup worker,
in case one day __set_extent_bit() can return an error to this code
path.
Fixes: f3038ee3a3 ("btrfs: Handle btrfs_set_extent_delalloc failure in fixup worker")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When doing a buffered write it's possible to leave the subv_writers
counter of the root, used for synchronization between buffered nocow
writers and snapshotting. This happens in an exceptional case like the
following:
1) We fail to allocate data space for the write, since there's not
enough available data space nor enough unallocated space for allocating
a new data block group;
2) Because of that failure, we try to go to NOCOW mode, which succeeds
and therefore we set the local variable 'only_release_metadata' to true
and set the root's sub_writers counter to 1 through the call to
btrfs_start_write_no_snapshotting() made by check_can_nocow();
3) The call to btrfs_copy_from_user() returns zero, which is very unlikely
to happen but not impossible;
4) No pages are copied because btrfs_copy_from_user() returned zero;
5) We call btrfs_end_write_no_snapshotting() which decrements the root's
subv_writers counter to 0;
6) We don't set 'only_release_metadata' back to 'false' because we do
it only if 'copied', the value returned by btrfs_copy_from_user(), is
greater than zero;
7) On the next iteration of the while loop, which processes the same
page range, we are now able to allocate data space for the write (we
got enough data space released in the meanwhile);
8) After this if we fail at btrfs_delalloc_reserve_metadata(), because
now there isn't enough free metadata space, or in some other place
further below (prepare_pages(), lock_and_cleanup_extent_if_need(),
btrfs_dirty_pages()), we break out of the while loop with
'only_release_metadata' having a value of 'true';
9) Because 'only_release_metadata' is 'true' we end up decrementing the
root's subv_writers counter to -1 (through a call to
btrfs_end_write_no_snapshotting()), and we also end up not releasing the
data space previously reserved through btrfs_check_data_free_space().
As a consequence the mechanism for synchronizing NOCOW buffered writes
with snapshotting gets broken.
Fix this by always setting 'only_release_metadata' to false at the start
of each iteration.
Fixes: 8257b2dc3c ("Btrfs: introduce btrfs_{start, end}_nocow_write() for each subvolume")
Fixes: 7ee9e4405f ("Btrfs: check if we can nocow if we don't have data space")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Some functions are doing some unnecessary indirection to reach the
btrfs_fs_info struct. Change these functions to receive a btrfs_fs_info
struct instead of a *file.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We don't need int argument bool shall do in free_root_pointers(). And
rename the argument as it confused two people.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The compression type upper limit constant is the same as the last value
and this is confusing. In order to keep coding style consistent, use
BTRFS_NR_COMPRESS_TYPES as the total number that follows the idom of
'NR' being one more than the last value.
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use enum to replace macro definitions of extent types.
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
DEFINE_HASHTABLE itself has already included initialization code,
we don't have to call hash_init() again, so remove it.
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function is used only during the final phase of freespace cache
writeout. This is necessary since using the plain btrfs_join_transaction
api is deadlock prone. The deadlock looks like:
T1:
btrfs_commit_transaction
commit_cowonly_roots
btrfs_write_dirty_block_groups
btrfs_wait_cache_io
__btrfs_wait_cache_io
btrfs_wait_ordered_range <-- Triggers ordered IO for freespace
inode and blocks transaction commit
until freespace cache writeout
T2: <-- after T1 has triggered the writeout
finish_ordered_fn
btrfs_finish_ordered_io
btrfs_join_transaction <--- this would block waiting for current
transaction to commit, but since trans
commit is waiting for this writeout to
finish
The special purpose functions prevents it by simply skipping the "wait
for writeout" since it's guaranteed the transaction won't proceed until
we are done.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Using an ASSERT in btrfs_pin_extent allows to more stringently observe
whether the function is called under a transaction or not.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The helper is trivial and we can understand what the atomic_inc on
something named refs does.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During a cyclic writeback, extent_write_cache_pages() uses done_index
to update the writeback_index after the current run is over. However,
instead of current index + 1, it gets to to the current index itself.
Unfortunately, this, combined with returning on EOF instead of looping
back, can lead to the following pathlogical behavior.
1. There is a single file which has accumulated enough dirty pages to
trigger balance_dirty_pages() and the writer appending to the file
with a series of short writes.
2. balance_dirty_pages kicks in, wakes up background writeback and sleeps.
3. Writeback kicks in and the cursor is on the last page of the dirty
file. Writeback is started or skipped if already in progress. As
it's EOF, extent_write_cache_pages() returns and the cursor is set
to done_index which is pointing to the last page.
4. Writeback is done. Nothing happens till balance_dirty_pages
finishes, at which point we go back to #1.
This can almost completely stall out writing back of the file and keep
the system over dirty threshold for a long time which can mess up the
whole system. We encountered this issue in production with a package
handling application which can reliably reproduce the issue when
running under tight memory limits.
Reading the comment in the error handling section, this seems to be to
avoid accidentally skipping a page in case the write attempt on the
page doesn't succeed. However, this concern seems bogus.
On each page, the code either:
* Skips and moves onto the next page.
* Fails issue and sets done_index to index + 1.
* Successfully issues and continue to the next page if budget allows
and not EOF.
IOW, as long as it's not EOF and there's budget, the code never
retries writing back the same page. Only when a page happens to be
the last page of a particular run, we end up retrying the page, which
can't possibly guarantee anything data integrity related. Besides,
cyclic writes are only used for non-syncing writebacks meaning that
there's no data integrity implication to begin with.
Fix it by always setting done_index past the current page being
processed.
Note that this problem exists in other writepages too.
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 4617ea3a52 (" Btrfs: fix necessary chunk tree space calculation
when allocating a chunk") removed the is_allocation argument from
check_system_chunk, since the formula for reserving the necessary space
for allocation or removing a chunk would be the same.
So, rework the comment by removing the mention of is_allocation
argument.
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Unlike read time tree checker errors, write time error can't be
inspected by "btrfs inspect dump-tree", so we need extra information to
determine what's going wrong.
The patch will add the following output for write time tree checker
error:
- The content of the offending tree block
To help determining if it's a false alert.
- Kernel WARN_ON() for debug build
This is helpful for us to detect unexpected write time tree checker
error, especially fstests could catch the dmesg.
Since the WARN_ON() is only triggered for write time tree checker,
test cases utilizing dm-error won't trigger this WARN_ON(), thus no
extra noise.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Refactor the check for prev_key->objectid of the following key types
into one function, check_prev_ino():
- EXTENT_DATA
- INODE_REF
- DIR_INDEX
- DIR_ITEM
- XATTR_ITEM
Also add the check of prev_key for INODE_REF.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
extent_write_locked_range() is used when we're falling back to buffered
IO from inside of compression. It allocates its own wbc and should
associate it with the inode's i_wb to make sure the IO goes down from
the correct cgroup.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Async CRCs and compression submit IO through helper threads, which means
they have IO priority inversions when cgroup IO controllers are in use.
This flags all of the writes submitted by btrfs helper threads as
REQ_CGROUP_PUNT. submit_bio() will punt these to dedicated per-blkcg
work items to avoid the priority inversion.
For the compression code, we take a reference on the wbc's blkg css and
pass it down to the async workers.
For the async CRCs, the bio already has the correct css, we just need to
tell the block layer to use REQ_CGROUP_PUNT.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Chris Mason <clm@fb.com>
Modified-and-reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: David Sterba <dsterba@suse.com>
The btrfs writepages function collects a large range of pages flagged
for delayed allocation, and then sends them down through the COW code
for processing. When compression is on, we allocate one async_chunk
structure for every 512K, and then run those pages through the
compression code for IO submission.
writepages starts all of this off with a single page, locked by the
original call to extent_write_cache_pages(), and it's important to keep
track of this page because it has already been through
clear_page_dirty_for_io().
The btrfs async_chunk struct has a pointer to the locked_page, and when
we're redirtying the page because compression had to fallback to
uncompressed IO, we use page->index to decide if a given async_chunk
struct really owns that page.
But, this is racey. If a given delalloc range is broken up into two
async_chunks (chunkA and chunkB), we can end up with something like
this:
compress_file_range(chunkA)
submit_compress_extents(chunkA)
submit compressed bios(chunkA)
put_page(locked_page)
compress_file_range(chunkB)
...
Or:
async_cow_submit
submit_compressed_extents <--- falls back to buffered writeout
cow_file_range
extent_clear_unlock_delalloc
__process_pages_contig
put_page(locked_pages)
async_cow_submit
The end result is that chunkA is completed and cleaned up before chunkB
even starts processing. This means we can free locked_page() and reuse
it elsewhere. If we get really lucky, it'll have the same page->index
in its new home as it did before.
While we're processing chunkB, we might decide we need to fall back to
uncompressed IO, and so compress_file_range() will call
__set_page_dirty_nobufers() on chunkB->locked_page.
Without cgroups in use, this creates as a phantom dirty page, which
isn't great but isn't the end of the world. What can happen, it can go
through the fixup worker and the whole COW machinery again:
in submit_compressed_extents():
while (async extents) {
...
cow_file_range
if (!page_started ...)
extent_write_locked_range
else if (...)
unlock_page
continue;
This hasn't been observed in practice but is still possible.
With cgroups in use, we might crash in the accounting code because
page->mapping->i_wb isn't set.
BUG: unable to handle kernel NULL pointer dereference at 00000000000000d0
IP: percpu_counter_add_batch+0x11/0x70
PGD 66534e067 P4D 66534e067 PUD 66534f067 PMD 0
Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
CPU: 16 PID: 2172 Comm: rm Not tainted
RIP: 0010:percpu_counter_add_batch+0x11/0x70
RSP: 0018:ffffc9000a97bbe0 EFLAGS: 00010286
RAX: 0000000000000005 RBX: 0000000000000090 RCX: 0000000000026115
RDX: 0000000000000030 RSI: ffffffffffffffff RDI: 0000000000000090
RBP: 0000000000000000 R08: fffffffffffffff5 R09: 0000000000000000
R10: 00000000000260c0 R11: ffff881037fc26c0 R12: ffffffffffffffff
R13: ffff880fe4111548 R14: ffffc9000a97bc90 R15: 0000000000000001
FS: 00007f5503ced480(0000) GS:ffff880ff7200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000d0 CR3: 00000001e0459005 CR4: 0000000000360ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
account_page_cleaned+0x15b/0x1f0
__cancel_dirty_page+0x146/0x200
truncate_cleanup_page+0x92/0xb0
truncate_inode_pages_range+0x202/0x7d0
btrfs_evict_inode+0x92/0x5a0
evict+0xc1/0x190
do_unlinkat+0x176/0x280
do_syscall_64+0x63/0x1a0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
The fix here is to make asyc_chunk->locked_page NULL everywhere but the
one async_chunk struct that's allowed to do things to the locked page.
Link: https://lore.kernel.org/linux-btrfs/c2419d01-5c84-3fb4-189e-4db519d08796@suse.com/
Fixes: 771ed689d2 ("Btrfs: Optimize compressed writeback and reads")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Chris Mason <clm@fb.com>
[ update changelog from mail thread discussion ]
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we're not using btrfs_schedule_bio() anymore, delete all the
code that supported it.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_schedule_bio() hands IO off to a helper thread to do the actual
submit_bio() call. This has been used to make sure async crc and
compression helpers don't get stuck on IO submission. To maintain good
performance, over time the IO submission threads duplicated some IO
scheduler characteristics such as high and low priority IOs and they
also made some ugly assumptions about request allocation batch sizes.
All of this cost at least one extra context switch during IO submission,
and doesn't fit well with the modern blkmq IO stack. So, this commit stops
using btrfs_schedule_bio(). We may need to adjust the number of async
helper threads for crcs and compression, but long term it's a better
path.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The attribute is more relaxed than const and the functions could
dereference pointers, as long as the observable state is not changed. We
do have such functions, based on -Wsuggest-attribute=pure .
The visible effects of this patch are negligible, there are differences
in the assembly but hard to summarize.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For some reason the attribute is called __attribute_const__ and not
__const, marks functions that have no observable effects on program
state, IOW not reading pointers, just the arguments and calculating a
value. Allows the compiler to do some optimizations, based on
-Wsuggest-attribute=const . The effects are rather small, though, about
60 bytes decrese of btrfs.ko.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The attribute can mark functions supposed to be called rarely if at all
and the text can be moved to sections far from the other code. The
attribute has been added to several functions already, this patch is
based on hints given by gcc -Wsuggest-attribute=cold.
The net effect of this patch is decrease of btrfs.ko by 1000-1300,
depending on the config options.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The parameter is now always set to NULL and could be dropped. The last
user was get_default_root but that got reworked in 05dbe6837b ("Btrfs:
unify subvol= and subvolid= mounting") and the parameter became unused.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We hit the following warning while running down a different problem
[ 6197.175850] ------------[ cut here ]------------
[ 6197.185082] refcount_t: underflow; use-after-free.
[ 6197.194704] WARNING: CPU: 47 PID: 966 at lib/refcount.c:190 refcount_sub_and_test_checked+0x53/0x60
[ 6197.521792] Call Trace:
[ 6197.526687] __btrfs_release_delayed_node+0x76/0x1c0
[ 6197.536615] btrfs_kill_all_delayed_nodes+0xec/0x130
[ 6197.546532] ? __btrfs_btree_balance_dirty+0x60/0x60
[ 6197.556482] btrfs_clean_one_deleted_snapshot+0x71/0xd0
[ 6197.566910] cleaner_kthread+0xfa/0x120
[ 6197.574573] kthread+0x111/0x130
[ 6197.581022] ? kthread_create_on_node+0x60/0x60
[ 6197.590086] ret_from_fork+0x1f/0x30
[ 6197.597228] ---[ end trace 424bb7ae00509f56 ]---
This is because the free side drops the ref without the lock, and then
takes the lock if our refcount is 0. So you can have nodes on the tree
that have a refcount of 0. Fix this by zero'ing out that element in our
temporary array so we don't try to kill it again.
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
Its very helpful if we had logged the device scanner process name to
debug the race condition between the systemd-udevd scan and the user
initiated device forget command.
This patch adds process name and pid to the scan message.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add pid to the message ]
Signed-off-by: David Sterba <dsterba@suse.com>
That function adds unnecessary indirection between backref_in_log and
the caller. Furthermore it also "downgrades" backref_in_log's return
value to a boolean, when in fact it could very well be an error.
Rectify the situation by simply opencoding name_in_log_ref in
replay_one_name and properly handling possible return codes from
backref_in_log.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
This function can return a negative error value if btrfs_search_slot
errors for whatever reason or if btrfs_alloc_path runs out of memory.
This is currently problemattic because backref_in_log is treated by its
callers as if it returns boolean.
Fix this by adding proper error handling in callers. That also enables
the function to return the direct error code from btrfs_search_slot.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Direct replacement, though note that the inside of the loop in
btrfs_find_name_in_backref is organized in a slightly different way but
is equvalent.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
The state was introduced in commit 4a9d8bdee3 ("Btrfs: make the state
of the transaction more readable"), then in commit 302167c50b
("btrfs: don't end the transaction for delayed refs in throttle") the
state is completely removed.
So we can just clean up the state since it's only compared but never
set.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add an overview of the basic btrfs transaction transitions, including
the following states:
- No transaction states
- Transaction N [[TRANS_STATE_RUNNING]]
- Transaction N [[TRANS_STATE_COMMIT_START]]
- Transaction N [[TRANS_STATE_COMMIT_DOING]]
- Transaction N [[TRANS_STATE_UNBLOCKED]]
- Transaction N [[TRANS_STATE_COMPLETED]]
For each state, the comment will include:
- Basic explaination about current state
- How to go next stage
- What will happen if we call various start_transaction() functions
- Relationship to transaction N+1
This doesn't provide tech details, but serves as a cheat sheet for
reader to get into the code a little easier.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Replace is_power_of_2 with the helper that is self-documenting and
remove the open coded call in alloc_profile_is_valid.
Signed-off-by: David Sterba <dsterba@suse.com>
As is_power_of_two takes unsigned long, it's not safe on 32bit
architectures, but we could pass any u64 value in seveal places. Add a
separate helper and also an alias that better expresses the purpose for
which the helper is used.
Signed-off-by: David Sterba <dsterba@suse.com>
When balance reduces the number of copies of metadata, it reduces the
redundancy, use the term redundancy instead of integrity.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function belongs to the family of locking functions, so move it
there. The 'noinline' keyword is dropped as it's now an exported
function that does not need it.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function belongs to the family of locking functions, so move it
there. The 'noinline' keyword is dropped as it's now an exported
function that does not need it.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function btrfs_assert_tree_locked is used outside of the locking
code so it is exported, however we can make it static inine as it's
fairly trivial.
This is the only locking assertion used in release builds, inlining
improves the text size by 174 bytes and reduces stack consumption in the
callers.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
I've noticed that none of the btrfs_assert_*lock* debugging helpers is
inlined, despite they're short and mostly a value update. Making them
inline shaves 67 from the text size, reduces stack consumption and
perhaps also slightly improves the performance due to avoiding
unnecessary calls.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit ac0c7cf8be ("btrfs: fix crash when tracepoint arguments are
freed by wq callbacks") added a void pointer, wtag, which is passed into
trace_btrfs_all_work_done() instead of the freed work item. This is
silly for a few reasons:
1. The freed work item still has the same address.
2. work is still in scope after it's freed, so assigning wtag doesn't
stop anyone from using it.
3. The tracepoint has always taken a void * argument, so assigning wtag
doesn't actually make things any more type-safe. (Note that the
original bug in commit bc074524e1 ("btrfs: prefix fsid to all trace
events") was that the void * was implicitly casted when it was passed
to btrfs_work_owner() in the trace point itself).
Instead, let's add some clearer warnings as comments.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 9e0af23764 ("Btrfs: fix task hang under heavy compressed
write") worked around the issue that a recycled work item could get a
false dependency on the original work item due to how the workqueue code
guarantees non-reentrancy. It did so by giving different work functions
to different types of work.
However, the fixes in the previous few patches are more complete, as
they prevent a work item from being recycled at all (except for a tiny
window that the kernel workqueue code handles for us). This obsoletes
the previous fix, so we don't need the unique helpers for correctness.
The only other reason to keep them would be so they show up in stack
traces, but they always seem to be optimized to a tail call, so they
don't show up anyways. So, let's just get rid of the extra indirection.
While we're here, rename normal_work_helper() to the more informative
btrfs_work_helper().
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, scrub_missing_raid56_worker() puts and potentially frees
sblock (which embeds the work item) and then submits a bio through
scrub_wr_submit(). This is another potential instance of the bug in
"btrfs: don't prematurely free work in run_ordered_work()". Fix it by
dropping the reference after we submit the bio.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, reada_start_machine_worker() frees the reada_machine_work and
then calls __reada_start_machine() to do readahead. This is another
potential instance of the bug in "btrfs: don't prematurely free work in
run_ordered_work()".
There _might_ already be a deadlock here: reada_start_machine_worker()
can depend on itself through stacked filesystems (__read_start_machine()
-> reada_start_machine_dev() -> reada_tree_block_flagged() ->
read_extent_buffer_pages() -> submit_one_bio() ->
btree_submit_bio_hook() -> btrfs_map_bio() -> submit_stripe_bio() ->
submit_bio() onto a loop device can trigger readahead on the lower
filesystem).
Either way, let's fix it by freeing the work at the end.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, end_workqueue_fn() frees the end_io_wq entry (which embeds
the work item) and then calls bio_endio(). This is another potential
instance of the bug in "btrfs: don't prematurely free work in
run_ordered_work()".
In particular, the endio call may depend on other work items. For
example, btrfs_end_dio_bio() can call btrfs_subio_endio_read() ->
__btrfs_correct_data_nocsum() -> dio_read_error() ->
submit_dio_repair_bio(), which submits a bio that is also completed
through a end_workqueue_fn() work item. However,
__btrfs_correct_data_nocsum() waits for the newly submitted bio to
complete, thus it depends on another work item.
This example currently usually works because we use different workqueue
helper functions for BTRFS_WQ_ENDIO_DATA and BTRFS_WQ_ENDIO_DIO_REPAIR.
However, it may deadlock with stacked filesystems and is fragile
overall. The proper fix is to free the work item at the very end of the
work function, so let's do that.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We hit the following very strange deadlock on a system with Btrfs on a
loop device backed by another Btrfs filesystem:
1. The top (loop device) filesystem queues an async_cow work item from
cow_file_range_async(). We'll call this work X.
2. Worker thread A starts work X (normal_work_helper()).
3. Worker thread A executes the ordered work for the top filesystem
(run_ordered_work()).
4. Worker thread A finishes the ordered work for work X and frees X
(work->ordered_free()).
5. Worker thread A executes another ordered work and gets blocked on I/O
to the bottom filesystem (still in run_ordered_work()).
6. Meanwhile, the bottom filesystem allocates and queues an async_cow
work item which happens to be the recently-freed X.
7. The workqueue code sees that X is already being executed by worker
thread A, so it schedules X to be executed _after_ worker thread A
finishes (see the find_worker_executing_work() call in
process_one_work()).
Now, the top filesystem is waiting for I/O on the bottom filesystem, but
the bottom filesystem is waiting for the top filesystem to finish, so we
deadlock.
This happens because we are breaking the workqueue assumption that a
work item cannot be recycled while it still depends on other work. Fix
it by waiting to free the work item until we are done with all of the
related ordered work.
P.S.:
One might ask why the workqueue code doesn't try to detect a recycled
work item. It actually does try by checking whether the work item has
the same work function (find_worker_executing_work()), but in our case
the function is the same. This is the only key that the workqueue code
has available to compare, short of adding an additional, layer-violating
"custom key". Considering that we're the only ones that have ever hit
this, we should just play by the rules.
Unfortunately, we haven't been able to create a minimal reproducer other
than our full container setup using a compress-force=zstd filesystem on
top of another compress-force=zstd filesystem.
Suggested-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit fc97fab0ea ("btrfs: Replace fs_info->qgroup_rescan_worker
workqueue with btrfs_workqueue.") converted qgroup_rescan_work to be
initialized with btrfs_init_work(), but it left behind an unnecessary
memset(). Get rid of the memset().
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This needs to be cleaned up in the future, but for now it belongs to the
extent-io-tree stuff since it uses the internal tree search code.
Needed to export get_state_failrec and set_state_failrec as well since
we're not going to move the actual IO part of the failrec stuff out at
this point.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This utilizes internal stuff to the extent_io_tree, so we need to export
it before we move it.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
extent_io.c/h are huge, encompassing a bunch of different things. The
extent_io_tree code can live on its own, so separate this out.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We are moving extent_io_tree into it's on file, so separate out the
extent_state init stuff from extent_io_tree_init().
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We check both extent buffer and extent state leaks in the same function,
separate these two functions out so we can move them around.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The following comment shows up in btrfs_search_slot() with out much
sense:
/*
* setup the path here so we can release it under lock
* contention with the cow code
*/
if (cow) {
/* code touching path->lock[] is far away from here */
}
This comment hasn't been cleaned up after the relevant code has been
removed.
The original code is introduced in commit 65b51a009e
("btrfs_search_slot: reduce lock contention by cowing in two stages"):
+
+ /*
+ * setup the path here so we can release it under lock
+ * contention with the cow code
+ */
+ p->nodes[level] = b;
+ if (!p->skip_locking)
+ p->locks[level] = 1;
+
But in current code, we have different timing for modifying path lock,
so just remove the comment.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Similar to btrfs_search_slot() done in previous patch, make a shortcut
for the level 0 case and allow to reduce indentation for the remaining
case.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs_search_slot(), we something like:
if (level != 0) {
/* Do search inside tree nodes*/
} else {
/* Do search inside tree leaves */
goto done;
}
This caused extra indent for tree node search code. Change it to
something like:
if (level == 0) {
/* Do search inside tree leaves */
goto done'
}
/* Do search inside tree nodes */
So we have more space to maneuver our code, this is especially useful as
the tree nodes search code is more complex than the leaves search code.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For INODE_REF we will check:
- Objectid (ino) against previous key
To detect missing INODE_ITEM.
- No overflow/padding in the data payload
Much like DIR_ITEM, but with less members to check.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For the following items, key->objectid is inode number:
- DIR_ITEM
- DIR_INDEX
- XATTR_ITEM
- EXTENT_DATA
- INODE_REF
So in the subvolume tree, such items must have its previous item share the
same objectid, e.g.:
(257 INODE_ITEM 0)
(257 DIR_INDEX xxx)
(257 DIR_ITEM xxx)
(258 INODE_ITEM 0)
(258 INODE_REF 0)
(258 XATTR_ITEM 0)
(258 EXTENT_DATA 0)
But if we have the following sequence, then there is definitely
something wrong, normally some INODE_ITEM is missing, like:
(257 INODE_ITEM 0)
(257 DIR_INDEX xxx)
(257 DIR_ITEM xxx)
(258 XATTR_ITEM 0) <<< objecitd suddenly changed to 258
(258 EXTENT_DATA 0)
So just by checking the previous key for above inode based key types, we
can detect a missing inode item.
For INODE_REF key type, the check will be added along with INODE_REF
checker.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's not used ouside of transaction.c
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A recent patch to btrfs showed that there was at least 1 case where a
nested transaction was committed. Nested transaction in this case means
a code which has a transaction handle calls some function which in turn
obtains a copy of the same transaction handle. In such cases the correct
thing to do is for the lower callee to call btrfs_end_transaction which
contains appropriate checks so as to not commit the transaction which
will result in stale trans handler for the caller.
To catch such cases add an assert in btrfs_commit_transaction ensuring
btrfs_trans_handle::use_count is always 1.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is similar to 942491c9e6 ("xfs: fix AIM7 regression"). Apparently
our current rwsem code doesn't like doing the trylock, then lock for
real scheme. This causes extra contention on the lock and can be
measured eg. by AIM7 benchmark. So change our read/write methods to
just do the trylock for the RWF_NOWAIT case.
Fixes: edf064e7c6 ("btrfs: nowait aio support")
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=xzXs
-----END PGP SIGNATURE-----
Merge tag 'for-5.4-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"A fix for an older bug that has started to show up during testing
(because of an updated test for rename exchange).
It's an in-memory corruption caused by local variable leaking out of
the function scope"
* tag 'for-5.4-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: fix log context list corruption after rename exchange operation
During rename exchange we might have successfully log the new name in the
source root's log tree, in which case we leave our log context (allocated
on stack) in the root's list of log contextes. However we might fail to
log the new name in the destination root, in which case we fallback to
a transaction commit later and never sync the log of the source root,
which causes the source root log context to remain in the list of log
contextes. This later causes invalid memory accesses because the context
was allocated on stack and after rename exchange finishes the stack gets
reused and overwritten for other purposes.
The kernel's linked list corruption detector (CONFIG_DEBUG_LIST=y) can
detect this and report something like the following:
[ 691.489929] ------------[ cut here ]------------
[ 691.489947] list_add corruption. prev->next should be next (ffff88819c944530), but was ffff8881c23f7be4. (prev=ffff8881c23f7a38).
[ 691.489967] WARNING: CPU: 2 PID: 28933 at lib/list_debug.c:28 __list_add_valid+0x95/0xe0
(...)
[ 691.489998] CPU: 2 PID: 28933 Comm: fsstress Not tainted 5.4.0-rc6-btrfs-next-62 #1
[ 691.490001] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014
[ 691.490003] RIP: 0010:__list_add_valid+0x95/0xe0
(...)
[ 691.490007] RSP: 0018:ffff8881f0b3faf8 EFLAGS: 00010282
[ 691.490010] RAX: 0000000000000000 RBX: ffff88819c944530 RCX: 0000000000000000
[ 691.490011] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffffffa2c497e0
[ 691.490013] RBP: ffff8881f0b3fe68 R08: ffffed103eaa4115 R09: ffffed103eaa4114
[ 691.490015] R10: ffff88819c944000 R11: ffffed103eaa4115 R12: 7fffffffffffffff
[ 691.490016] R13: ffff8881b4035610 R14: ffff8881e7b84728 R15: 1ffff1103e167f7b
[ 691.490019] FS: 00007f4b25ea2e80(0000) GS:ffff8881f5500000(0000) knlGS:0000000000000000
[ 691.490021] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 691.490022] CR2: 00007fffbb2d4eec CR3: 00000001f2a4a004 CR4: 00000000003606e0
[ 691.490025] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 691.490027] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 691.490029] Call Trace:
[ 691.490058] btrfs_log_inode_parent+0x667/0x2730 [btrfs]
[ 691.490083] ? join_transaction+0x24a/0xce0 [btrfs]
[ 691.490107] ? btrfs_end_log_trans+0x80/0x80 [btrfs]
[ 691.490111] ? dget_parent+0xb8/0x460
[ 691.490116] ? lock_downgrade+0x6b0/0x6b0
[ 691.490121] ? rwlock_bug.part.0+0x90/0x90
[ 691.490127] ? do_raw_spin_unlock+0x142/0x220
[ 691.490151] btrfs_log_dentry_safe+0x65/0x90 [btrfs]
[ 691.490172] btrfs_sync_file+0x9f1/0xc00 [btrfs]
[ 691.490195] ? btrfs_file_write_iter+0x1800/0x1800 [btrfs]
[ 691.490198] ? rcu_read_lock_any_held.part.11+0x20/0x20
[ 691.490204] ? __do_sys_newstat+0x88/0xd0
[ 691.490207] ? cp_new_stat+0x5d0/0x5d0
[ 691.490218] ? do_fsync+0x38/0x60
[ 691.490220] do_fsync+0x38/0x60
[ 691.490224] __x64_sys_fdatasync+0x32/0x40
[ 691.490228] do_syscall_64+0x9f/0x540
[ 691.490233] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 691.490235] RIP: 0033:0x7f4b253ad5f0
(...)
[ 691.490239] RSP: 002b:00007fffbb2d6078 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 691.490242] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f4b253ad5f0
[ 691.490244] RDX: 00007fffbb2d5fe0 RSI: 00007fffbb2d5fe0 RDI: 0000000000000003
[ 691.490245] RBP: 000000000000000d R08: 0000000000000001 R09: 00007fffbb2d608c
[ 691.490247] R10: 00000000000002e8 R11: 0000000000000246 R12: 00000000000001f4
[ 691.490248] R13: 0000000051eb851f R14: 00007fffbb2d6120 R15: 00005635a498bda0
This started happening recently when running some test cases from fstests
like btrfs/004 for example, because support for rename exchange was added
last week to fsstress from fstests.
So fix this by deleting the log context for the source root from the list
if we have logged the new name in the source root.
Reported-by: Su Yue <Damenly_Su@gmx.com>
Fixes: d4682ba03e ("Btrfs: sync log after logging new name")
CC: stable@vger.kernel.org # 4.19+
Tested-by: Su Yue <Damenly_Su@gmx.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=CZxY
-----END PGP SIGNATURE-----
Merge tag 'for-5.4-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few regressions and fixes for stable.
Regressions:
- fix a race leading to metadata space leak after task received a
signal
- un-deprecate 2 ioctls, marked as deprecated by mistake
Fixes:
- fix limit check for number of devices during chunk allocation
- fix a race due to double evaluation of i_size_read inside max()
macro, can cause a crash
- remove wrong device id check in tree-checker"
* tag 'for-5.4-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: un-deprecate ioctls START_SYNC and WAIT_SYNC
btrfs: save i_size to avoid double evaluation of i_size_read in compress_file_range
Btrfs: fix race leading to metadata space leak after task received signal
btrfs: tree-checker: Fix wrong check on max devid
btrfs: Consider system chunk array size for new SYSTEM chunks
The two ioctls START_SYNC and WAIT_SYNC were mistakenly marked as
deprecated and scheduled for removal but we actualy do use them for
'btrfs subvolume delete -C/-c'. The deprecated thing in ebc87351e5
should have been just the async flag for subvolume creation.
The deprecation has been added in this development cycle, remove it
until it's time.
Fixes: ebc87351e5 ("btrfs: Deprecate BTRFS_SUBVOL_CREATE_ASYNC flag")
Signed-off-by: David Sterba <dsterba@suse.com>
We hit a regression while rolling out 5.2 internally where we were
hitting the following panic
kernel BUG at mm/page-writeback.c:2659!
RIP: 0010:clear_page_dirty_for_io+0xe6/0x1f0
Call Trace:
__process_pages_contig+0x25a/0x350
? extent_clear_unlock_delalloc+0x43/0x70
submit_compressed_extents+0x359/0x4d0
normal_work_helper+0x15a/0x330
process_one_work+0x1f5/0x3f0
worker_thread+0x2d/0x3d0
? rescuer_thread+0x340/0x340
kthread+0x111/0x130
? kthread_create_on_node+0x60/0x60
ret_from_fork+0x1f/0x30
This is happening because the page is not locked when doing
clear_page_dirty_for_io. Looking at the core dump it was because our
async_extent had a ram_size of 24576 but our async_chunk range only
spanned 20480, so we had a whole extra page in our ram_size for our
async_extent.
This happened because we try not to compress pages outside of our
i_size, however a cleanup patch changed us to do
actual_end = min_t(u64, i_size_read(inode), end + 1);
which is problematic because i_size_read() can evaluate to different
values in between checking and assigning. So either an expanding
truncate or a fallocate could increase our i_size while we're doing
writeout and actual_end would end up being past the range we have
locked.
I confirmed this was what was happening by installing a debug kernel
that had
actual_end = min_t(u64, i_size_read(inode), end + 1);
if (actual_end > end + 1) {
printk(KERN_ERR "KABOOM\n");
actual_end = end + 1;
}
and installing it onto 500 boxes of the tier that had been seeing the
problem regularly. Last night I got my debug message and no panic,
confirming what I expected.
[ dsterba: the assembly confirms a tiny race window:
mov 0x20(%rsp),%rax
cmp %rax,0x48(%r15) # read
movl $0x0,0x18(%rsp)
mov %rax,%r12
mov %r14,%rax
cmovbe 0x48(%r15),%r12 # eval
Where r15 is inode and 0x48 is offset of i_size.
The original fix was to revert 62b3762271 that would do an
intermediate assignment and this would also avoid the doulble
evaluation but is not future-proof, should the compiler merge the
stores and call i_size_read anyway.
There's a patch adding READ_ONCE to i_size_read but that's not being
applied at the moment and we need to fix the bug. Instead, emulate
READ_ONCE by two barrier()s that's what effectively happens. The
assembly confirms single evaluation:
mov 0x48(%rbp),%rax # read once
mov 0x20(%rsp),%rcx
mov $0x20,%edx
cmp %rax,%rcx
cmovbe %rcx,%rax
mov %rax,(%rsp)
mov %rax,%rcx
mov %r14,%rax
Where 0x48(%rbp) is inode->i_size stored to %eax.
]
Fixes: 62b3762271 ("btrfs: Remove isize local variable in compress_file_range")
CC: stable@vger.kernel.org # v5.1+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ changelog updated ]
Signed-off-by: David Sterba <dsterba@suse.com>
When a task that is allocating metadata needs to wait for the async
reclaim job to process its ticket and gets a signal (because it was killed
for example) before doing the wait, the task ends up erroring out but
with space reserved for its ticket, which never gets released, resulting
in a metadata space leak (more specifically a leak in the bytes_may_use
counter of the metadata space_info object).
Here's the sequence of steps leading to the space leak:
1) A task tries to create a file for example, so it ends up trying to
start a transaction at btrfs_create();
2) The filesystem is currently in a state where there is not enough
metadata free space to satisfy the transaction's needs. So at
space-info.c:__reserve_metadata_bytes() we create a ticket and
add it to the list of tickets of the space info object. Also,
because the metadata async reclaim job is not running, we queue
a job ro run metadata reclaim;
3) In the meanwhile the task receives a signal (like SIGTERM from
a kill command for example);
4) After queing the async reclaim job, at __reserve_metadata_bytes(),
we unlock the metadata space info and call handle_reserve_ticket();
5) That last function calls wait_reserve_ticket(), which acquires the
lock from the metadata space info. Then in the first iteration of
its while loop, it calls prepare_to_wait_event(), which returns
-ERESTARTSYS because the task has a pending signal. As a result,
we set the error field of the ticket to -EINTR and exit the while
loop without deleting the ticket from the list of tickets (in the
space info object). After exiting the loop we unlock the space info;
6) The async reclaim job is able to release enough metadata, acquires
the metadata space info's lock and then reserves space for the ticket,
since the ticket is still in the list of (non-priority) tickets. The
space reservation happens at btrfs_try_granting_tickets(), called from
maybe_fail_all_tickets(). This increments the bytes_may_use counter
from the metadata space info object, sets the ticket's bytes field to
zero (meaning success, that space was reserved) and removes it from
the list of tickets;
7) wait_reserve_ticket() returns, with the error field of the ticket
set to -EINTR. Then handle_reserve_ticket() just propagates that error
to the caller. Because an error was returned, the caller does not
release the reserved space, since the expectation is that any error
means no space was reserved.
Fix this by removing the ticket from the list, while holding the space
info lock, at wait_reserve_ticket() when prepare_to_wait_event() returns
an error.
Also add some comments and an assertion to guarantee we never end up with
a ticket that has an error set and a bytes counter field set to zero, to
more easily detect regressions in the future.
This issue could be triggered sporadically by some test cases from fstests
such as generic/269 for example, which tries to fill a filesystem and then
kills fsstress processes running in the background.
When this issue happens, we get a warning in syslog/dmesg when unmounting
the filesystem, like the following:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 13240 at fs/btrfs/block-group.c:3186 btrfs_free_block_groups+0x314/0x470 [btrfs]
(...)
CPU: 0 PID: 13240 Comm: umount Tainted: G W L 5.3.0-rc8-btrfs-next-48+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014
RIP: 0010:btrfs_free_block_groups+0x314/0x470 [btrfs]
(...)
RSP: 0018:ffff9910c14cfdb8 EFLAGS: 00010286
RAX: 0000000000000024 RBX: ffff89cd8a4d55f0 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff89cdf6a178a8 RDI: ffff89cdf6a178a8
RBP: ffff9910c14cfde8 R08: 0000000000000000 R09: 0000000000000001
R10: ffff89cd4d618040 R11: 0000000000000000 R12: ffff89cd8a4d5508
R13: ffff89cde7c4a600 R14: dead000000000122 R15: dead000000000100
FS: 00007f42754432c0(0000) GS:ffff89cdf6a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fd25a47f730 CR3: 000000021f8d6006 CR4: 00000000003606f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
close_ctree+0x1ad/0x390 [btrfs]
generic_shutdown_super+0x6c/0x110
kill_anon_super+0xe/0x30
btrfs_kill_super+0x12/0xa0 [btrfs]
deactivate_locked_super+0x3a/0x70
cleanup_mnt+0xb4/0x160
task_work_run+0x7e/0xc0
exit_to_usermode_loop+0xfa/0x100
do_syscall_64+0x1cb/0x220
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f4274d2cb37
(...)
RSP: 002b:00007ffcff701d38 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
RAX: 0000000000000000 RBX: 0000557ebde2f060 RCX: 00007f4274d2cb37
RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000557ebde2f240
RBP: 0000557ebde2f240 R08: 0000557ebde2f270 R09: 0000000000000015
R10: 00000000000006b4 R11: 0000000000000246 R12: 00007f427522ee64
R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffcff701fc0
irq event stamp: 0
hardirqs last enabled at (0): [<0000000000000000>] 0x0
hardirqs last disabled at (0): [<ffffffffb12b561e>] copy_process+0x75e/0x1fd0
softirqs last enabled at (0): [<ffffffffb12b561e>] copy_process+0x75e/0x1fd0
softirqs last disabled at (0): [<0000000000000000>] 0x0
---[ end trace bcf4b235461b26f6 ]---
BTRFS info (device sdb): space_info 4 has 19116032 free, is full
BTRFS info (device sdb): space_info total=33554432, used=14176256, pinned=0, reserved=0, may_use=196608, readonly=65536
BTRFS info (device sdb): global_block_rsv: size 0 reserved 0
BTRFS info (device sdb): trans_block_rsv: size 0 reserved 0
BTRFS info (device sdb): chunk_block_rsv: size 0 reserved 0
BTRFS info (device sdb): delayed_block_rsv: size 0 reserved 0
BTRFS info (device sdb): delayed_refs_rsv: size 0 reserved 0
Fixes: 374bf9c5cd ("btrfs: unify error handling for ticket flushing")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
The following script will cause false alert on devid check.
#!/bin/bash
dev1=/dev/test/test
dev2=/dev/test/scratch1
mnt=/mnt/btrfs
umount $dev1 &> /dev/null
umount $dev2 &> /dev/null
umount $mnt &> /dev/null
mkfs.btrfs -f $dev1
mount $dev1 $mnt
_fail()
{
echo "!!! FAILED !!!"
exit 1
}
for ((i = 0; i < 4096; i++)); do
btrfs dev add -f $dev2 $mnt || _fail
btrfs dev del $dev1 $mnt || _fail
dev_tmp=$dev1
dev1=$dev2
dev2=$dev_tmp
done
[CAUSE]
Tree-checker uses BTRFS_MAX_DEVS() and BTRFS_MAX_DEVS_SYS_CHUNK() as
upper limit for devid. But we can have devid holes just like above
script.
So the check for devid is incorrect and could cause false alert.
[FIX]
Just remove the whole devid check. We don't have any hard requirement
for devid assignment.
Furthermore, even devid could get corrupted by a bitflip, we still have
dev extents verification at mount time, so corrupted data won't sneak
in.
This fixes fstests btrfs/194.
Reported-by: Anand Jain <anand.jain@oracle.com>
Fixes: ab4ba2e133 ("btrfs: tree-checker: Verify dev item")
CC: stable@vger.kernel.org # 5.2+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For SYSTEM chunks, despite the regular chunk item size limit, there is
another limit due to system chunk array size.
The extra limit was removed in a refactoring, so add it back.
Fixes: e3ecdb3fde ("btrfs: factor out devs_max setting in __btrfs_alloc_chunk")
CC: stable@vger.kernel.org # 5.3+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The .ioctl and .compat_ioctl file operations have the same prototype so
they can both point to the same function, which works great almost all
the time when all the commands are compatible.
One exception is the s390 architecture, where a compat pointer is only
31 bit wide, and converting it into a 64-bit pointer requires calling
compat_ptr(). Most drivers here will never run in s390, but since we now
have a generic helper for it, it's easy enough to use it consistently.
I double-checked all these drivers to ensure that all ioctl arguments
are used as pointers or are ignored, but are not interpreted as integer
values.
Acked-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: David Sterba <dsterba@suse.com>
Acked-by: Darren Hart (VMware) <dvhart@infradead.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=Ft+G
-----END PGP SIGNATURE-----
Merge tag 'for-5.4-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fixes of error handling cleanup of metadata accounting with qgroups
enabled
- fix swapped values for qgroup tracepoints
- fix race when handling full sync flag
- don't start unused worker thread, functionality removed already
* tag 'for-5.4-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: check for the full sync flag while holding the inode lock during fsync
Btrfs: fix qgroup double free after failure to reserve metadata for delalloc
btrfs: tracepoints: Fix bad entry members of qgroup events
btrfs: tracepoints: Fix wrong parameter order for qgroup events
btrfs: qgroup: Always free PREALLOC META reserve in btrfs_delalloc_release_extents()
btrfs: don't needlessly create extent-refs kernel thread
btrfs: block-group: Fix a memory leak due to missing btrfs_put_block_group()
Btrfs: add missing extents release on file extent cluster relocation error
We were checking for the full fsync flag in the inode before locking the
inode, which is racy, since at that that time it might not be set but
after we acquire the inode lock some other task set it. One case where
this can happen is on a system low on memory and some concurrent task
failed to allocate an extent map and therefore set the full sync flag on
the inode, to force the next fsync to work in full mode.
A consequence of missing the full fsync flag set is hitting the problems
fixed by commit 0c713cbab6 ("Btrfs: fix race between ranged fsync and
writeback of adjacent ranges"), BUG_ON() when dropping extents from a log
tree, hitting assertion failures at tree-log.c:copy_items() or all sorts
of weird inconsistencies after replaying a log due to file extents items
representing ranges that overlap.
So just move the check such that it's done after locking the inode and
before starting writeback again.
Fixes: 0c713cbab6 ("Btrfs: fix race between ranged fsync and writeback of adjacent ranges")
CC: stable@vger.kernel.org # 5.2+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we fail to reserve metadata for delalloc operations we end up releasing
the previously reserved qgroup amount twice, once explicitly under the
'out_qgroup' label by calling btrfs_qgroup_free_meta_prealloc() and once
again, under label 'out_fail', by calling btrfs_inode_rsv_release() with a
value of 'true' for its 'qgroup_free' argument, which results in
btrfs_qgroup_free_meta_prealloc() being called again, so we end up having
a double free.
Also if we fail to reserve the necessary qgroup amount, we jump to the
label 'out_fail', which calls btrfs_inode_rsv_release() and that in turns
calls btrfs_qgroup_free_meta_prealloc(), even though we weren't able to
reserve any qgroup amount. So we freed some amount we never reserved.
So fix this by removing the call to btrfs_inode_rsv_release() in the
failure path, since it's not necessary at all as we haven't changed the
inode's block reserve in any way at this point.
Fixes: c8eaeac7b7 ("btrfs: reserve delalloc metadata differently")
CC: stable@vger.kernel.org # 5.2+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
For btrfs:qgroup_meta_reserve event, the trace event can output garbage:
qgroup_meta_reserve: 9c7f6acc-b342-4037-bc47-7f6e4d2232d7: refroot=5(FS_TREE) type=DATA diff=2
The diff should always be alinged to sector size (4k), so there is
definitely something wrong.
[CAUSE]
For the wrong @diff, it's caused by wrong parameter order.
The correct parameters are:
struct btrfs_root, s64 diff, int type.
However the parameters used are:
struct btrfs_root, int type, s64 diff.
Fixes: 4ee0d8832c ("btrfs: qgroup: Update trace events for metadata reservation")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[Background]
Btrfs qgroup uses two types of reserved space for METADATA space,
PERTRANS and PREALLOC.
PERTRANS is metadata space reserved for each transaction started by
btrfs_start_transaction().
While PREALLOC is for delalloc, where we reserve space before joining a
transaction, and finally it will be converted to PERTRANS after the
writeback is done.
[Inconsistency]
However there is inconsistency in how we handle PREALLOC metadata space.
The most obvious one is:
In btrfs_buffered_write():
btrfs_delalloc_release_extents(BTRFS_I(inode), reserve_bytes, true);
We always free qgroup PREALLOC meta space.
While in btrfs_truncate_block():
btrfs_delalloc_release_extents(BTRFS_I(inode), blocksize, (ret != 0));
We only free qgroup PREALLOC meta space when something went wrong.
[The Correct Behavior]
The correct behavior should be the one in btrfs_buffered_write(), we
should always free PREALLOC metadata space.
The reason is, the btrfs_delalloc_* mechanism works by:
- Reserve metadata first, even it's not necessary
In btrfs_delalloc_reserve_metadata()
- Free the unused metadata space
Normally in:
btrfs_delalloc_release_extents()
|- btrfs_inode_rsv_release()
Here we do calculation on whether we should release or not.
E.g. for 64K buffered write, the metadata rsv works like:
/* The first page */
reserve_meta: num_bytes=calc_inode_reservations()
free_meta: num_bytes=0
total: num_bytes=calc_inode_reservations()
/* The first page caused one outstanding extent, thus needs metadata
rsv */
/* The 2nd page */
reserve_meta: num_bytes=calc_inode_reservations()
free_meta: num_bytes=calc_inode_reservations()
total: not changed
/* The 2nd page doesn't cause new outstanding extent, needs no new meta
rsv, so we free what we have reserved */
/* The 3rd~16th pages */
reserve_meta: num_bytes=calc_inode_reservations()
free_meta: num_bytes=calc_inode_reservations()
total: not changed (still space for one outstanding extent)
This means, if btrfs_delalloc_release_extents() determines to free some
space, then those space should be freed NOW.
So for qgroup, we should call btrfs_qgroup_free_meta_prealloc() other
than btrfs_qgroup_convert_reserved_meta().
The good news is:
- The callers are not that hot
The hottest caller is in btrfs_buffered_write(), which is already
fixed by commit 336a8bb8e3 ("btrfs: Fix wrong
btrfs_delalloc_release_extents parameter"). Thus it's not that
easy to cause false EDQUOT.
- The trans commit in advance for qgroup would hide the bug
Since commit f5fef45936 ("btrfs: qgroup: Make qgroup async transaction
commit more aggressive"), when btrfs qgroup metadata free space is slow,
it will try to commit transaction and free the wrongly converted
PERTRANS space, so it's not that easy to hit such bug.
[FIX]
So to fix the problem, remove the @qgroup_free parameter for
btrfs_delalloc_release_extents(), and always pass true to
btrfs_inode_rsv_release().
Reported-by: Filipe Manana <fdmanana@suse.com>
Fixes: 43b18595d6 ("btrfs: qgroup: Use separate meta reservation type for delalloc")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The patch 32b593bfcb ("Btrfs: remove no longer used function to run
delayed refs asynchronously") removed the async delayed refs but the
thread has been created, without any use. Remove it to avoid resource
consumption.
Fixes: 32b593bfcb ("Btrfs: remove no longer used function to run delayed refs asynchronously")
CC: stable@vger.kernel.org # 5.2+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs_read_block_groups(), if we have an invalid block group which
has mixed type (DATA|METADATA) while the fs doesn't have MIXED_GROUPS
feature, we error out without freeing the block group cache.
This patch will add the missing btrfs_put_block_group() to prevent
memory leak.
Note for stable backports: the file to patch in versions <= 5.3 is
fs/btrfs/extent-tree.c
Fixes: 49303381f1 ("Btrfs: bail out if block group has different mixed flag")
CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we error out when finding a page at relocate_file_extent_cluster(), we
need to release the outstanding extents counter on the relocation inode,
set by the previous call to btrfs_delalloc_reserve_metadata(), otherwise
the inode's block reserve size can never decrease to zero and metadata
space is leaked. Therefore add a call to btrfs_delalloc_release_extents()
in case we can't find the target page.
Fixes: 8b62f87bad ("Btrfs: rework outstanding_extents")
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=zpDj
-----END PGP SIGNATURE-----
Merge tag 'for-5.4-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more stabitly fixes, one build warning fix.
- fix inode allocation under NOFS context
- fix leak in fiemap due to concurrent append writes
- fix log-root tree updates
- fix balance convert of single profile on 32bit architectures
- silence false positive warning on old GCCs (code moved in rc1)"
* tag 'for-5.4-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: silence maybe-uninitialized warning in clone_range
btrfs: fix uninitialized ret in ref-verify
btrfs: allocate new inode in NOFS context
btrfs: fix balance convert to single on 32-bit host CPUs
btrfs: fix incorrect updating of log root tree
Btrfs: fix memory leak due to concurrent append writes with fiemap
GCC throws warning message as below:
‘clone_src_i_size’ may be used uninitialized in this function
[-Wmaybe-uninitialized]
#define IS_ALIGNED(x, a) (((x) & ((typeof(x))(a) - 1)) == 0)
^
fs/btrfs/send.c:5088:6: note: ‘clone_src_i_size’ was declared here
u64 clone_src_i_size;
^
The clone_src_i_size is only used as call-by-reference
in a call to get_inode_info().
Silence the warning by initializing clone_src_i_size to 0.
Note that the warning is a false positive and reported by older versions
of GCC (eg. 7.x) but not eg 9.x. As there have been numerous people, the
patch is applied. Setting clone_src_i_size to 0 does not otherwise make
sense and would not do any action in case the code changes in the future.
Signed-off-by: Austin Kim <austindh.kim@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add note ]
Signed-off-by: David Sterba <dsterba@suse.com>
Coverity caught a case where we could return with a uninitialized value
in ret in process_leaf. This is actually pretty likely because we could
very easily run into a block group item key and have a garbage value in
ret and think there was an errror. Fix this by initializing ret to 0.
Reported-by: Colin Ian King <colin.king@canonical.com>
Fixes: fd708b81d9 ("Btrfs: add a extent ref verify tool")
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, the command:
btrfs balance start -dconvert=single,soft .
on a Raspberry Pi produces the following kernel message:
BTRFS error (device mmcblk0p2): balance: invalid convert data profile single
This fails because we use is_power_of_2(unsigned long) to validate
the new data profile, the constant for 'single' profile uses bit 48,
and there are only 32 bits in a long on ARM.
Fix by open-coding the check using u64 variables.
Tested by completing the original balance command on several Raspberry
Pis.
Fixes: 818255feec ("btrfs: use common helper instead of open coding a bit test")
CC: stable@vger.kernel.org # 4.20+
Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We've historically had reports of being unable to mount file systems
because the tree log root couldn't be read. Usually this is the "parent
transid failure", but could be any of the related errors, including
"fsid mismatch" or "bad tree block", depending on which block got
allocated.
The modification of the individual log root items are serialized on the
per-log root root_mutex. This means that any modification to the
per-subvol log root_item is completely protected.
However we update the root item in the log root tree outside of the log
root tree log_mutex. We do this in order to allow multiple subvolumes
to be updated in each log transaction.
This is problematic however because when we are writing the log root
tree out we update the super block with the _current_ log root node
information. Since these two operations happen independently of each
other, you can end up updating the log root tree in between writing out
the dirty blocks and setting the super block to point at the current
root.
This means we'll point at the new root node that hasn't been written
out, instead of the one we should be pointing at. Thus whatever garbage
or old block we end up pointing at complains when we mount the file
system later and try to replay the log.
Fix this by copying the log's root item into a local root item copy.
Then once we're safely under the log_root_tree->log_mutex we update the
root item in the log_root_tree. This way we do not modify the
log_root_tree while we're committing it, fixing the problem.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Chris Mason <clm@fb.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we have a buffered write that starts at an offset greater than or
equals to the file's size happening concurrently with a full ranged
fiemap, we can end up leaking an extent state structure.
Suppose we have a file with a size of 1Mb, and before the buffered write
and fiemap are performed, it has a single extent state in its io tree
representing the range from 0 to 1Mb, with the EXTENT_DELALLOC bit set.
The following sequence diagram shows how the memory leak happens if a
fiemap a buffered write, starting at offset 1Mb and with a length of
4Kb, are performed concurrently.
CPU 1 CPU 2
extent_fiemap()
--> it's a full ranged fiemap
range from 0 to LLONG_MAX - 1
(9223372036854775807)
--> locks range in the inode's
io tree
--> after this we have 2 extent
states in the io tree:
--> 1 for range [0, 1Mb[ with
the bits EXTENT_LOCKED and
EXTENT_DELALLOC_BITS set
--> 1 for the range
[1Mb, LLONG_MAX[ with
the EXTENT_LOCKED bit set
--> start buffered write at offset
1Mb with a length of 4Kb
btrfs_file_write_iter()
btrfs_buffered_write()
--> cached_state is NULL
lock_and_cleanup_extent_if_need()
--> returns 0 and does not lock
range because it starts
at current i_size / eof
--> cached_state remains NULL
btrfs_dirty_pages()
btrfs_set_extent_delalloc()
(...)
__set_extent_bit()
--> splits extent state for range
[1Mb, LLONG_MAX[ and now we
have 2 extent states:
--> one for the range
[1Mb, 1Mb + 4Kb[ with
EXTENT_LOCKED set
--> another one for the range
[1Mb + 4Kb, LLONG_MAX[ with
EXTENT_LOCKED set as well
--> sets EXTENT_DELALLOC on the
extent state for the range
[1Mb, 1Mb + 4Kb[
--> caches extent state
[1Mb, 1Mb + 4Kb[ into
@cached_state because it has
the bit EXTENT_LOCKED set
--> btrfs_buffered_write() ends up
with a non-NULL cached_state and
never calls anything to release its
reference on it, resulting in a
memory leak
Fix this by calling free_extent_state() on cached_state if the range was
not locked by lock_and_cleanup_extent_if_need().
The same issue can happen if anything else other than fiemap locks a range
that covers eof and beyond.
This could be triggered, sporadically, by test case generic/561 from the
fstests suite, which makes duperemove run concurrently with fsstress, and
duperemove does plenty of calls to fiemap. When CONFIG_BTRFS_DEBUG is set
the leak is reported in dmesg/syslog when removing the btrfs module with
a message like the following:
[77100.039461] BTRFS: state leak: start 6574080 end 6582271 state 16402 in tree 0 refs 1
Otherwise (CONFIG_BTRFS_DEBUG not set) detectable with kmemleak.
CC: stable@vger.kernel.org # 4.16+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=2UM7
-----END PGP SIGNATURE-----
Merge tag 'for-5.4-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A bunch of fixes that accumulated in recent weeks, mostly material for
stable.
Summary:
- fix for regression from 5.3 that prevents to use balance convert
with single profile
- qgroup fixes: rescan race, accounting leak with multiple writers,
potential leak after io failure recovery
- fix for use after free in relocation (reported by KASAN)
- other error handling fixups"
* tag 'for-5.4-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: qgroup: Fix reserved data space leak if we have multiple reserve calls
btrfs: qgroup: Fix the wrong target io_tree when freeing reserved data space
btrfs: Fix a regression which we can't convert to SINGLE profile
btrfs: relocation: fix use-after-free on dead relocation roots
Btrfs: fix race setting up and completing qgroup rescan workers
Btrfs: fix missing error return if writeback for extent buffer never started
btrfs: adjust dirty_metadata_bytes after writeback failure of extent buffer
Btrfs: fix selftests failure due to uninitialized i_mode in test inodes
[BUG]
The following script can cause btrfs qgroup data space leak:
mkfs.btrfs -f $dev
mount $dev -o nospace_cache $mnt
btrfs subv create $mnt/subv
btrfs quota en $mnt
btrfs quota rescan -w $mnt
btrfs qgroup limit 128m $mnt/subv
for (( i = 0; i < 3; i++)); do
# Create 3 64M holes for latter fallocate to fail
truncate -s 192m $mnt/subv/file
xfs_io -c "pwrite 64m 4k" $mnt/subv/file > /dev/null
xfs_io -c "pwrite 128m 4k" $mnt/subv/file > /dev/null
sync
# it's supposed to fail, and each failure will leak at least 64M
# data space
xfs_io -f -c "falloc 0 192m" $mnt/subv/file &> /dev/null
rm $mnt/subv/file
sync
done
# Shouldn't fail after we removed the file
xfs_io -f -c "falloc 0 64m" $mnt/subv/file
[CAUSE]
Btrfs qgroup data reserve code allow multiple reservations to happen on
a single extent_changeset:
E.g:
btrfs_qgroup_reserve_data(inode, &data_reserved, 0, SZ_1M);
btrfs_qgroup_reserve_data(inode, &data_reserved, SZ_1M, SZ_2M);
btrfs_qgroup_reserve_data(inode, &data_reserved, 0, SZ_4M);
Btrfs qgroup code has its internal tracking to make sure we don't
double-reserve in above example.
The only pattern utilizing this feature is in the main while loop of
btrfs_fallocate() function.
However btrfs_qgroup_reserve_data()'s error handling has a bug in that
on error it clears all ranges in the io_tree with EXTENT_QGROUP_RESERVED
flag but doesn't free previously reserved bytes.
This bug has a two fold effect:
- Clearing EXTENT_QGROUP_RESERVED ranges
This is the correct behavior, but it prevents
btrfs_qgroup_check_reserved_leak() to catch the leakage as the
detector is purely EXTENT_QGROUP_RESERVED flag based.
- Leak the previously reserved data bytes.
The bug manifests when N calls to btrfs_qgroup_reserve_data are made and
the last one fails, leaking space reserved in the previous ones.
[FIX]
Also free previously reserved data bytes when btrfs_qgroup_reserve_data
fails.
Fixes: 5247255370 ("btrfs: qgroup: Introduce btrfs_qgroup_reserve_data function")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Under the following case with qgroup enabled, if some error happened
after we have reserved delalloc space, then in error handling path, we
could cause qgroup data space leakage:
From btrfs_truncate_block() in inode.c:
ret = btrfs_delalloc_reserve_space(inode, &data_reserved,
block_start, blocksize);
if (ret)
goto out;
again:
page = find_or_create_page(mapping, index, mask);
if (!page) {
btrfs_delalloc_release_space(inode, data_reserved,
block_start, blocksize, true);
btrfs_delalloc_release_extents(BTRFS_I(inode), blocksize, true);
ret = -ENOMEM;
goto out;
}
[CAUSE]
In the above case, btrfs_delalloc_reserve_space() will call
btrfs_qgroup_reserve_data() and mark the io_tree range with
EXTENT_QGROUP_RESERVED flag.
In the error handling path, we have the following call stack:
btrfs_delalloc_release_space()
|- btrfs_free_reserved_data_space()
|- btrsf_qgroup_free_data()
|- __btrfs_qgroup_release_data(reserved=@reserved, free=1)
|- qgroup_free_reserved_data(reserved=@reserved)
|- clear_record_extent_bits();
|- freed += changeset.bytes_changed;
However due to a completion bug, qgroup_free_reserved_data() will clear
EXTENT_QGROUP_RESERVED flag in BTRFS_I(inode)->io_failure_tree, other
than the correct BTRFS_I(inode)->io_tree.
Since io_failure_tree is never marked with that flag,
btrfs_qgroup_free_data() will not free any data reserved space at all,
causing a leakage.
This type of error handling can only be triggered by errors outside of
qgroup code. So EDQUOT error from qgroup can't trigger it.
[FIX]
Fix the wrong target io_tree.
Reported-by: Josef Bacik <josef@toxicpanda.com>
Fixes: bc42bda223 ("btrfs: qgroup: Fix qgroup reserved space underflow by only freeing reserved ranges")
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
With v5.3 kernel, we can't convert to SINGLE profile:
# btrfs balance start -f -dconvert=single $mnt
ERROR: error during balancing '/mnt/btrfs': Invalid argument
# dmesg -t | tail
validate_convert_profile: data profile=0x1000000000000 allowed=0x20 is_valid=1 final=0x1000000000000 ret=1
BTRFS error (device dm-3): balance: invalid convert data profile single
[CAUSE]
With the extra debug output added, it shows that the @allowed bit is
lacking the special in-memory only SINGLE profile bit.
Thus we fail at that (profile & ~allowed) check.
This regression is caused by commit 081db89b13 ("btrfs: use raid_attr
to get allowed profiles for balance conversion") and the fact that we
don't use any bit to indicate SINGLE profile on-disk, but uses special
in-memory only bit to help distinguish different profiles.
[FIX]
Add that BTRFS_AVAIL_ALLOC_BIT_SINGLE to @allowed, so the code should be
the same as it was and fix the regression.
Reported-by: Chris Murphy <lists@colorremedies.com>
Fixes: 081db89b13 ("btrfs: use raid_attr to get allowed profiles for balance conversion")
CC: stable@vger.kernel.org # 5.3+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
One user reported a reproducible KASAN report about use-after-free:
BTRFS info (device sdi1): balance: start -dvrange=1256811659264..1256811659265
BTRFS info (device sdi1): relocating block group 1256811659264 flags data|raid0
==================================================================
BUG: KASAN: use-after-free in btrfs_init_reloc_root+0x2cd/0x340 [btrfs]
Write of size 8 at addr ffff88856f671710 by task kworker/u24:10/261579
CPU: 2 PID: 261579 Comm: kworker/u24:10 Tainted: P OE 5.2.11-arch1-1-kasan #4
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./X99 Extreme4, BIOS P3.80 04/06/2018
Workqueue: btrfs-endio-write btrfs_endio_write_helper [btrfs]
Call Trace:
dump_stack+0x7b/0xba
print_address_description+0x6c/0x22e
? btrfs_init_reloc_root+0x2cd/0x340 [btrfs]
__kasan_report.cold+0x1b/0x3b
? btrfs_init_reloc_root+0x2cd/0x340 [btrfs]
kasan_report+0x12/0x17
__asan_report_store8_noabort+0x17/0x20
btrfs_init_reloc_root+0x2cd/0x340 [btrfs]
record_root_in_trans+0x2a0/0x370 [btrfs]
btrfs_record_root_in_trans+0xf4/0x140 [btrfs]
start_transaction+0x1ab/0xe90 [btrfs]
btrfs_join_transaction+0x1d/0x20 [btrfs]
btrfs_finish_ordered_io+0x7bf/0x18a0 [btrfs]
? lock_repin_lock+0x400/0x400
? __kmem_cache_shutdown.cold+0x140/0x1ad
? btrfs_unlink_subvol+0x9b0/0x9b0 [btrfs]
finish_ordered_fn+0x15/0x20 [btrfs]
normal_work_helper+0x1bd/0xca0 [btrfs]
? process_one_work+0x819/0x1720
? kasan_check_read+0x11/0x20
btrfs_endio_write_helper+0x12/0x20 [btrfs]
process_one_work+0x8c9/0x1720
? pwq_dec_nr_in_flight+0x2f0/0x2f0
? worker_thread+0x1d9/0x1030
worker_thread+0x98/0x1030
kthread+0x2bb/0x3b0
? process_one_work+0x1720/0x1720
? kthread_park+0x120/0x120
ret_from_fork+0x35/0x40
Allocated by task 369692:
__kasan_kmalloc.part.0+0x44/0xc0
__kasan_kmalloc.constprop.0+0xba/0xc0
kasan_kmalloc+0x9/0x10
kmem_cache_alloc_trace+0x138/0x260
btrfs_read_tree_root+0x92/0x360 [btrfs]
btrfs_read_fs_root+0x10/0xb0 [btrfs]
create_reloc_root+0x47d/0xa10 [btrfs]
btrfs_init_reloc_root+0x1e2/0x340 [btrfs]
record_root_in_trans+0x2a0/0x370 [btrfs]
btrfs_record_root_in_trans+0xf4/0x140 [btrfs]
start_transaction+0x1ab/0xe90 [btrfs]
btrfs_start_transaction+0x1e/0x20 [btrfs]
__btrfs_prealloc_file_range+0x1c2/0xa00 [btrfs]
btrfs_prealloc_file_range+0x13/0x20 [btrfs]
prealloc_file_extent_cluster+0x29f/0x570 [btrfs]
relocate_file_extent_cluster+0x193/0xc30 [btrfs]
relocate_data_extent+0x1f8/0x490 [btrfs]
relocate_block_group+0x600/0x1060 [btrfs]
btrfs_relocate_block_group+0x3a0/0xa00 [btrfs]
btrfs_relocate_chunk+0x9e/0x180 [btrfs]
btrfs_balance+0x14e4/0x2fc0 [btrfs]
btrfs_ioctl_balance+0x47f/0x640 [btrfs]
btrfs_ioctl+0x119d/0x8380 [btrfs]
do_vfs_ioctl+0x9f5/0x1060
ksys_ioctl+0x67/0x90
__x64_sys_ioctl+0x73/0xb0
do_syscall_64+0xa5/0x370
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Freed by task 369692:
__kasan_slab_free+0x14f/0x210
kasan_slab_free+0xe/0x10
kfree+0xd8/0x270
btrfs_drop_snapshot+0x154c/0x1eb0 [btrfs]
clean_dirty_subvols+0x227/0x340 [btrfs]
relocate_block_group+0x972/0x1060 [btrfs]
btrfs_relocate_block_group+0x3a0/0xa00 [btrfs]
btrfs_relocate_chunk+0x9e/0x180 [btrfs]
btrfs_balance+0x14e4/0x2fc0 [btrfs]
btrfs_ioctl_balance+0x47f/0x640 [btrfs]
btrfs_ioctl+0x119d/0x8380 [btrfs]
do_vfs_ioctl+0x9f5/0x1060
ksys_ioctl+0x67/0x90
__x64_sys_ioctl+0x73/0xb0
do_syscall_64+0xa5/0x370
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The buggy address belongs to the object at ffff88856f671100
which belongs to the cache kmalloc-4k of size 4096
The buggy address is located 1552 bytes inside of
4096-byte region [ffff88856f671100, ffff88856f672100)
The buggy address belongs to the page:
page:ffffea0015bd9c00 refcount:1 mapcount:0 mapping:ffff88864400e600 index:0x0 compound_mapcount: 0
flags: 0x2ffff0000010200(slab|head)
raw: 02ffff0000010200 dead000000000100 dead000000000200 ffff88864400e600
raw: 0000000000000000 0000000000070007 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88856f671600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88856f671680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff88856f671700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88856f671780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88856f671800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
BTRFS info (device sdi1): 1 enospc errors during balance
BTRFS info (device sdi1): balance: ended with status: -28
[CAUSE]
The problem happens when finish_ordered_io() get called with balance
still running, while the reloc root of that subvolume is already dead.
(Tree is swap already done, but tree not yet deleted for possible qgroup
usage.)
That means root->reloc_root still exists, but that reloc_root can be
under btrfs_drop_snapshot(), thus we shouldn't access it.
The following race could cause the use-after-free problem:
CPU1 | CPU2
--------------------------------------------------------------------------
| relocate_block_group()
| |- unset_reloc_control(rc)
| |- btrfs_commit_transaction()
btrfs_finish_ordered_io() | |- clean_dirty_subvols()
|- btrfs_join_transaction() | |
|- record_root_in_trans() | |
|- btrfs_init_reloc_root() | |
|- if (root->reloc_root) | |
| | |- root->reloc_root = NULL
| | |- btrfs_drop_snapshot(reloc_root);
|- reloc_root->last_trans|
= trans->transid |
^^^^^^^^^^^^^^^^^^^^^^
Use after free
[FIX]
Fix it by the following modifications:
- Test if the root has dead reloc tree before accessing root->reloc_root
If the root has BTRFS_ROOT_DEAD_RELOC_TREE, then we don't need to
create or update root->reloc_tree
- Clear the BTRFS_ROOT_DEAD_RELOC_TREE flag until we have fully dropped
reloc tree
To co-operate with above modification, so as long as
BTRFS_ROOT_DEAD_RELOC_TREE is still set, we won't try to re-create
reloc tree at record_root_in_trans().
Reported-by: Cebtenzzre <cebtenzzre@gmail.com>
Fixes: d2311e6985 ("btrfs: relocation: Delay reloc tree deletion after merge_reloc_roots")
CC: stable@vger.kernel.org # 5.1+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is a race between setting up a qgroup rescan worker and completing
a qgroup rescan worker that can lead to callers of the qgroup rescan wait
ioctl to either not wait for the rescan worker to complete or to hang
forever due to missing wake ups. The following diagram shows a sequence
of steps that illustrates the race.
CPU 1 CPU 2 CPU 3
btrfs_ioctl_quota_rescan()
btrfs_qgroup_rescan()
qgroup_rescan_init()
mutex_lock(&fs_info->qgroup_rescan_lock)
spin_lock(&fs_info->qgroup_lock)
fs_info->qgroup_flags |=
BTRFS_QGROUP_STATUS_FLAG_RESCAN
init_completion(
&fs_info->qgroup_rescan_completion)
fs_info->qgroup_rescan_running = true
mutex_unlock(&fs_info->qgroup_rescan_lock)
spin_unlock(&fs_info->qgroup_lock)
btrfs_init_work()
--> starts the worker
btrfs_qgroup_rescan_worker()
mutex_lock(&fs_info->qgroup_rescan_lock)
fs_info->qgroup_flags &=
~BTRFS_QGROUP_STATUS_FLAG_RESCAN
mutex_unlock(&fs_info->qgroup_rescan_lock)
starts transaction, updates qgroup status
item, etc
btrfs_ioctl_quota_rescan()
btrfs_qgroup_rescan()
qgroup_rescan_init()
mutex_lock(&fs_info->qgroup_rescan_lock)
spin_lock(&fs_info->qgroup_lock)
fs_info->qgroup_flags |=
BTRFS_QGROUP_STATUS_FLAG_RESCAN
init_completion(
&fs_info->qgroup_rescan_completion)
fs_info->qgroup_rescan_running = true
mutex_unlock(&fs_info->qgroup_rescan_lock)
spin_unlock(&fs_info->qgroup_lock)
btrfs_init_work()
--> starts another worker
mutex_lock(&fs_info->qgroup_rescan_lock)
fs_info->qgroup_rescan_running = false
mutex_unlock(&fs_info->qgroup_rescan_lock)
complete_all(&fs_info->qgroup_rescan_completion)
Before the rescan worker started by the task at CPU 3 completes, if
another task calls btrfs_ioctl_quota_rescan(), it will get -EINPROGRESS
because the flag BTRFS_QGROUP_STATUS_FLAG_RESCAN is set at
fs_info->qgroup_flags, which is expected and correct behaviour.
However if other task calls btrfs_ioctl_quota_rescan_wait() before the
rescan worker started by the task at CPU 3 completes, it will return
immediately without waiting for the new rescan worker to complete,
because fs_info->qgroup_rescan_running is set to false by CPU 2.
This race is making test case btrfs/171 (from fstests) to fail often:
btrfs/171 9s ... - output mismatch (see /home/fdmanana/git/hub/xfstests/results//btrfs/171.out.bad)
--- tests/btrfs/171.out 2018-09-16 21:30:48.505104287 +0100
+++ /home/fdmanana/git/hub/xfstests/results//btrfs/171.out.bad 2019-09-19 02:01:36.938486039 +0100
@@ -1,2 +1,3 @@
QA output created by 171
+ERROR: quota rescan failed: Operation now in progress
Silence is golden
...
(Run 'diff -u /home/fdmanana/git/hub/xfstests/tests/btrfs/171.out /home/fdmanana/git/hub/xfstests/results//btrfs/171.out.bad' to see the entire diff)
That is because the test calls the btrfs-progs commands "qgroup quota
rescan -w", "qgroup assign" and "qgroup remove" in a sequence that makes
calls to the rescan start ioctl fail with -EINPROGRESS (note the "btrfs"
commands 'qgroup assign' and 'qgroup remove' often call the rescan start
ioctl after calling the qgroup assign ioctl,
btrfs_ioctl_qgroup_assign()), since previous waits didn't actually wait
for a rescan worker to complete.
Another problem the race can cause is missing wake ups for waiters,
since the call to complete_all() happens outside a critical section and
after clearing the flag BTRFS_QGROUP_STATUS_FLAG_RESCAN. In the sequence
diagram above, if we have a waiter for the first rescan task (executed
by CPU 2), then fs_info->qgroup_rescan_completion.wait is not empty, and
if after the rescan worker clears BTRFS_QGROUP_STATUS_FLAG_RESCAN and
before it calls complete_all() against
fs_info->qgroup_rescan_completion, the task at CPU 3 calls
init_completion() against fs_info->qgroup_rescan_completion which
re-initilizes its wait queue to an empty queue, therefore causing the
rescan worker at CPU 2 to call complete_all() against an empty queue,
never waking up the task waiting for that rescan worker.
Fix this by clearing BTRFS_QGROUP_STATUS_FLAG_RESCAN and setting
fs_info->qgroup_rescan_running to false in the same critical section,
delimited by the mutex fs_info->qgroup_rescan_lock, as well as doing the
call to complete_all() in that same critical section. This gives the
protection needed to avoid rescan wait ioctl callers not waiting for a
running rescan worker and the lost wake ups problem, since setting that
rescan flag and boolean as well as initializing the wait queue is done
already in a critical section delimited by that mutex (at
qgroup_rescan_init()).
Fixes: 57254b6ebc ("Btrfs: add ioctl to wait for qgroup rescan completion")
Fixes: d2c609b834 ("btrfs: properly track when rescan worker is running")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If lock_extent_buffer_for_io() fails, it returns a negative value, but its
caller btree_write_cache_pages() ignores such error. This means that a
call to flush_write_bio(), from lock_extent_buffer_for_io(), might have
failed. We should make btree_write_cache_pages() notice such error values
and stop immediatelly, making sure filemap_fdatawrite_range() returns an
error to the transaction commit path. A failure from flush_write_bio()
should also result in the endio callback end_bio_extent_buffer_writepage()
being invoked, which sets the BTRFS_FS_*_ERR bits appropriately, so that
there's no risk a transaction or log commit doesn't catch a writeback
failure.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Before, if a eb failed to write out, we would end up triggering a
BUG_ON(). As of f4340622e0 ("btrfs: extent_io: Move the BUG_ON() in
flush_write_bio() one level up"), we no longer BUG_ON(), so we should
make life consistent and add back the unwritten bytes to
dirty_metadata_bytes.
Fixes: f4340622e0 ("btrfs: extent_io: Move the BUG_ON() in flush_write_bio() one level up")
CC: stable@vger.kernel.org # 5.2+
Reviewed-by: Filipe Manana <fdmanana@kernel.org>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: David Sterba <dsterba@suse.com>
Some of the self tests create a test inode, setup some extents and then do
calls to btrfs_get_extent() to test that the corresponding extent maps
exist and are correct. However btrfs_get_extent(), since the 5.2 merge
window, now errors out when it finds a regular or prealloc extent for an
inode that does not correspond to a regular file (its ->i_mode is not
S_IFREG). This causes the self tests to fail sometimes, specially when
KASAN, slub_debug and page poisoning are enabled:
$ modprobe btrfs
modprobe: ERROR: could not insert 'btrfs': Invalid argument
$ dmesg
[ 9414.691648] Btrfs loaded, crc32c=crc32c-intel, debug=on, assert=on, integrity-checker=on, ref-verify=on
[ 9414.692655] BTRFS: selftest: sectorsize: 4096 nodesize: 4096
[ 9414.692658] BTRFS: selftest: running btrfs free space cache tests
[ 9414.692918] BTRFS: selftest: running extent only tests
[ 9414.693061] BTRFS: selftest: running bitmap only tests
[ 9414.693366] BTRFS: selftest: running bitmap and extent tests
[ 9414.696455] BTRFS: selftest: running space stealing from bitmap to extent tests
[ 9414.697131] BTRFS: selftest: running extent buffer operation tests
[ 9414.697133] BTRFS: selftest: running btrfs_split_item tests
[ 9414.697564] BTRFS: selftest: running extent I/O tests
[ 9414.697583] BTRFS: selftest: running find delalloc tests
[ 9415.081125] BTRFS: selftest: running find_first_clear_extent_bit test
[ 9415.081278] BTRFS: selftest: running extent buffer bitmap tests
[ 9415.124192] BTRFS: selftest: running inode tests
[ 9415.124195] BTRFS: selftest: running btrfs_get_extent tests
[ 9415.127909] BTRFS: selftest: running hole first btrfs_get_extent test
[ 9415.128343] BTRFS critical (device (efault)): regular/prealloc extent found for non-regular inode 256
[ 9415.131428] BTRFS: selftest: fs/btrfs/tests/inode-tests.c:904 expected a real extent, got 0
This happens because the test inodes are created without ever initializing
the i_mode field of the inode, and neither VFS's new_inode() nor the btrfs
callback btrfs_alloc_inode() initialize the i_mode. Initialization of the
i_mode is done through the various callbacks used by the VFS to create
new inodes (regular files, directories, symlinks, tmpfiles, etc), which
all call btrfs_new_inode() which in turn calls inode_init_owner(), which
sets the inode's i_mode. Since the tests only uses new_inode() to create
the test inodes, the i_mode was never initialized.
This always happens on a VM I used with kasan, slub_debug and many other
debug facilities enabled. It also happened to someone who reported this
on bugzilla (on a 5.3-rc).
Fix this by setting i_mode to S_IFREG at btrfs_new_test_inode().
Fixes: 6bf9e4bd6a ("btrfs: inode: Verify inode mode to avoid NULL pointer dereference")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204397
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAl1/hCoACgkQxWXV+ddt
WDs0lQ//flGLX4fvaY2vuWA26t1elITnIatyX8S+xP4pUsT1Tyy1egeGpR8Jku/7
sCOgUlEM2MNXqveOdkQqPJuFPp3B6tInz4S/fowtLlz4enp7uTXw2SFuS3bhOJ+b
rpxK9VTc6QV3aipBCG31m8fnDiMaj2Hcspp0oej3V2mBhLUvzn69+P4eo7WN+46w
r2F605+lfURauHE6WjM09HINx3NGSfPqdSA5rJvHSm0jlxhb9l3DJOX8cYkbf8lo
MAbLDZmtiDiQAqRcsQPi6LZ1LKBkOYaeSnVvnXnH23FI04LBra3duk03qpvWCW2R
c1tFnKF5vACCyBQp1z8WYP9GjjoW5WT33R2iXufgwXP6pkLpS/12qLLeXqO2K4p5
zINKrIkF3P+GHxiDsQZE3G9A4UpKWFHCxKdxyWIV8LQDEBrgE2Mo3NThEyRBbP+8
1dia4j+qFHvPTMNBvBCjCZMqDwbCe9H70WOXKGE36JITW2le91mn4qHl4SuWReUP
IoHYDVcC/eBGRegc9X+bLJNjJYqo+XFo6u32/fUC5YVhngycQEi2vg1vv8fWQ7dB
g/Ruo3Inrk8h5kPmrHvbOzGazgANIt5ELHrYMRMA5WSgaq29jtGt9oTnsrd+I88G
aPJtwAZfLwdSjl/pwJw8atEPrf04DA2w+gO7rZ/AmeLshnGfOTc=
=bY+a
-----END PGP SIGNATURE-----
Merge tag 'for-5.4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"This continues with work on code refactoring, sanity checks and space
handling. There are some less user visible changes, nothing that would
particularly stand out.
User visible changes:
- tree checker, more sanity checks of:
- ROOT_ITEM (key, size, generation, level, alignment, flags)
- EXTENT_ITEM and METADATA_ITEM checks (key, size, offset,
alignment, refs)
- tree block reference items
- EXTENT_DATA_REF (key, hash, offset)
- deprecate flag BTRFS_SUBVOL_CREATE_ASYNC for subvolume creation
ioctl, scheduled removal in 5.7
- delete stale and unused UAPI definitions
BTRFS_DEV_REPLACE_ITEM_STATE_*
- improved export of debugging information available via existing
sysfs directory structure
- try harder to delete relations between qgroups and allow to delete
orphan entries
- remove unreliable space checks before relocation starts
Core:
- space handling:
- improved ticket reservations and other high level logic in
order to remove special cases
- factor flushing infrastructure and use it for different
contexts, allows to remove some special case handling
- reduce metadata reservation when only updating inodes
- reduce global block reserve minimum size (affects small
filesystems)
- improved overcommit logic wrt global block reserve
- tests:
- fix memory leaks in extent IO tree
- catch all TRIM range
Fixes:
- fix ENOSPC errors, leading to transaction aborts, when cloning
extents
- several fixes for inode number cache (mount option inode_cache)
- fix potential soft lockups during send when traversing large trees
- fix unaligned access to space cache pages with SLUB debug on
(PowerPC)
Other:
- refactoring public/private functions, moving to new or more
appropriate files
- defines converted to enums
- error handling improvements
- more assertions and comments
- old code deletion"
* tag 'for-5.4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (138 commits)
btrfs: Relinquish CPUs in btrfs_compare_trees
btrfs: Don't assign retval of btrfs_try_tree_write_lock/btrfs_tree_read_lock_atomic
btrfs: create structure to encode checksum type and length
btrfs: turn checksum type define into an enum
btrfs: add enospc debug messages for ticket failure
btrfs: do not account global reserve in can_overcommit
btrfs: use btrfs_try_granting_tickets in update_global_rsv
btrfs: always reserve our entire size for the global reserve
btrfs: change the minimum global reserve size
btrfs: rename btrfs_space_info_add_old_bytes
btrfs: remove orig_bytes from reserve_ticket
btrfs: fix may_commit_transaction to deal with no partial filling
btrfs: rework wake_all_tickets
btrfs: refactor the ticket wakeup code
btrfs: stop partially refilling tickets when releasing space
btrfs: add space reservation tracepoint for reserved bytes
btrfs: roll tracepoint into btrfs_space_info_update helper
btrfs: do not allow reservations if we have pending tickets
btrfs: stop clearing EXTENT_DIRTY in inode I/O tree
btrfs: treat RWF_{,D}SYNC writes as sync for CRCs
...
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAl16aTEACgkQxWXV+ddt
WDvICg//cSn5w+g6EnxbrAZ6IYQJ4GA7lZSk2i6Dc/lI3BTfs7Wj0SPRKd01pBjT
N+wbqoOgubsS1jkNfJsGCN80XzSa0tvyQdbezj5ncgSPXp4FRlT0K24EUQNPaqbg
SsvvxAOCerVN3Yj2qrHNWIS5qZ5/8/NjLXca1DJ/OYmrkKfhe+Z6/b9EuKffPnco
erMnaeSvQ27hYkkcdM0DGcWDoHHAQrefGNjQzp5vncJNN1F7+EGLbcH31UwApk1K
/hvOQ6Q6SoR/NKbQu3AitrR9u7v9uhWP9jHJZT46q1m89CzI4S5FjK2wKZFjPE6r
0PGRqnpdaGAERaTo3s6jIqv/X2gzJkhhhzGMiPgPJCQbAH39f/fFGEX22TjG33Yq
2CiGSIPnmKQ7HE494YLuSyHD/89SutMMCkbF0sFBoKuTnu2HQMn9r5Pk6bEKtvIY
iTk75/WTXR02qWCVhTyNDa9QnxewQGJC1d1KNQ6MwbzBiYyG9S/DDZnjLJPNx7DF
KAAANCDdyPpraLcmw2sD/qd1o10HfQmn9z1L2v3YvJBfjMe76SQFCP5WwaJRcjOm
c3ScAX9bXeXJgH+E98kWc7T6p49IPdMDGAtArQmtjO4V8pFRuqG+2Ibg6Za/y5XZ
fkaS5UY+XIk3TUpEqkWKMPMigM9a3jgHskyMgdRLQfVnoOc6Z+k=
=KXB8
-----END PGP SIGNATURE-----
Merge tag 'for-5.3-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Here are two fixes, one of them urgent fixing a bug introduced in 5.2
and reported by many users. It took time to identify the root cause,
catching the 5.3 release is higly desired also to push the fix to 5.2
stable tree.
The bug is a mess up of return values after adding proper error
handling and honestly the kind of bug that can cause sleeping
disorders until it's caught. My appologies to everybody who was
affected.
Summary of what could happen:
1) either a hang when committing a transaction, if this happens
there's no risk of corruption, still the hang is very inconvenient
and can't be resolved without a reboot
2) writeback for some btree nodes may never be started and we end up
committing a transaction without noticing that, this is really
serious and that will lead to the "parent transid verify failed"
messages"
* tag 'for-5.3-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: fix unwritten extent buffers and hangs on future writeback attempts
Btrfs: fix assertion failure during fsync and use of stale transaction
The lock_extent_buffer_io() returns 1 to the caller to tell it everything
went fine and the callers needs to start writeback for the extent buffer
(submit a bio, etc), 0 to tell the caller everything went fine but it does
not need to start writeback for the extent buffer, and a negative value if
some error happened.
When it's about to return 1 it tries to lock all pages, and if a try lock
on a page fails, and we didn't flush any existing bio in our "epd", it
calls flush_write_bio(epd) and overwrites the return value of 1 to 0 or
an error. The page might have been locked elsewhere, not with the goal
of starting writeback of the extent buffer, and even by some code other
than btrfs, like page migration for example, so it does not mean the
writeback of the extent buffer was already started by some other task,
so returning a 0 tells the caller (btree_write_cache_pages()) to not
start writeback for the extent buffer. Note that epd might currently have
either no bio, so flush_write_bio() returns 0 (success) or it might have
a bio for another extent buffer with a lower index (logical address).
Since we return 0 with the EXTENT_BUFFER_WRITEBACK bit set on the
extent buffer and writeback is never started for the extent buffer,
future attempts to writeback the extent buffer will hang forever waiting
on that bit to be cleared, since it can only be cleared after writeback
completes. Such hang is reported with a trace like the following:
[49887.347053] INFO: task btrfs-transacti:1752 blocked for more than 122 seconds.
[49887.347059] Not tainted 5.2.13-gentoo #2
[49887.347060] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[49887.347062] btrfs-transacti D 0 1752 2 0x80004000
[49887.347064] Call Trace:
[49887.347069] ? __schedule+0x265/0x830
[49887.347071] ? bit_wait+0x50/0x50
[49887.347072] ? bit_wait+0x50/0x50
[49887.347074] schedule+0x24/0x90
[49887.347075] io_schedule+0x3c/0x60
[49887.347077] bit_wait_io+0x8/0x50
[49887.347079] __wait_on_bit+0x6c/0x80
[49887.347081] ? __lock_release.isra.29+0x155/0x2d0
[49887.347083] out_of_line_wait_on_bit+0x7b/0x80
[49887.347084] ? var_wake_function+0x20/0x20
[49887.347087] lock_extent_buffer_for_io+0x28c/0x390
[49887.347089] btree_write_cache_pages+0x18e/0x340
[49887.347091] do_writepages+0x29/0xb0
[49887.347093] ? kmem_cache_free+0x132/0x160
[49887.347095] ? convert_extent_bit+0x544/0x680
[49887.347097] filemap_fdatawrite_range+0x70/0x90
[49887.347099] btrfs_write_marked_extents+0x53/0x120
[49887.347100] btrfs_write_and_wait_transaction.isra.4+0x38/0xa0
[49887.347102] btrfs_commit_transaction+0x6bb/0x990
[49887.347103] ? start_transaction+0x33e/0x500
[49887.347105] transaction_kthread+0x139/0x15c
So fix this by not overwriting the return value (ret) with the result
from flush_write_bio(). We also need to clear the EXTENT_BUFFER_WRITEBACK
bit in case flush_write_bio() returns an error, otherwise it will hang
any future attempts to writeback the extent buffer, and undo all work
done before (set back EXTENT_BUFFER_DIRTY, etc).
This is a regression introduced in the 5.2 kernel.
Fixes: 2e3c25136a ("btrfs: extent_io: add proper error handling to lock_extent_buffer_for_io()")
Fixes: f4340622e0 ("btrfs: extent_io: Move the BUG_ON() in flush_write_bio() one level up")
Reported-by: Zdenek Sojka <zsojka@seznam.cz>
Link: https://lore.kernel.org/linux-btrfs/GpO.2yos.3WGDOLpx6t%7D.1TUDYM@seznam.cz/T/#u
Reported-by: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
Link: https://lore.kernel.org/linux-btrfs/5c4688ac-10a7-fb07-70e8-c5d31a3fbb38@profihost.ag/T/#t
Reported-by: Drazen Kacar <drazen.kacar@oradian.com>
Link: https://lore.kernel.org/linux-btrfs/DB8PR03MB562876ECE2319B3E579590F799C80@DB8PR03MB5628.eurprd03.prod.outlook.com/
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204377
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Sometimes when fsync'ing a file we need to log that other inodes exist and
when we need to do that we acquire a reference on the inodes and then drop
that reference using iput() after logging them.
That generally is not a problem except if we end up doing the final iput()
(dropping the last reference) on the inode and that inode has a link count
of 0, which can happen in a very short time window if the logging path
gets a reference on the inode while it's being unlinked.
In that case we end up getting the eviction callback, btrfs_evict_inode(),
invoked through the iput() call chain which needs to drop all of the
inode's items from its subvolume btree, and in order to do that, it needs
to join a transaction at the helper function evict_refill_and_join().
However because the task previously started a transaction at the fsync
handler, btrfs_sync_file(), it has current->journal_info already pointing
to a transaction handle and therefore evict_refill_and_join() will get
that transaction handle from btrfs_join_transaction(). From this point on,
two different problems can happen:
1) evict_refill_and_join() will often change the transaction handle's
block reserve (->block_rsv) and set its ->bytes_reserved field to a
value greater than 0. If evict_refill_and_join() never commits the
transaction, the eviction handler ends up decreasing the reference
count (->use_count) of the transaction handle through the call to
btrfs_end_transaction(), and after that point we have a transaction
handle with a NULL ->block_rsv (which is the value prior to the
transaction join from evict_refill_and_join()) and a ->bytes_reserved
value greater than 0. If after the eviction/iput completes the inode
logging path hits an error or it decides that it must fallback to a
transaction commit, the btrfs fsync handle, btrfs_sync_file(), gets a
non-zero value from btrfs_log_dentry_safe(), and because of that
non-zero value it tries to commit the transaction using a handle with
a NULL ->block_rsv and a non-zero ->bytes_reserved value. This makes
the transaction commit hit an assertion failure at
btrfs_trans_release_metadata() because ->bytes_reserved is not zero but
the ->block_rsv is NULL. The produced stack trace for that is like the
following:
[192922.917158] assertion failed: !trans->bytes_reserved, file: fs/btrfs/transaction.c, line: 816
[192922.917553] ------------[ cut here ]------------
[192922.917922] kernel BUG at fs/btrfs/ctree.h:3532!
[192922.918310] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
[192922.918666] CPU: 2 PID: 883 Comm: fsstress Tainted: G W 5.1.4-btrfs-next-47 #1
[192922.919035] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014
[192922.919801] RIP: 0010:assfail.constprop.25+0x18/0x1a [btrfs]
(...)
[192922.920925] RSP: 0018:ffffaebdc8a27da8 EFLAGS: 00010286
[192922.921315] RAX: 0000000000000051 RBX: ffff95c9c16a41c0 RCX: 0000000000000000
[192922.921692] RDX: 0000000000000000 RSI: ffff95cab6b16838 RDI: ffff95cab6b16838
[192922.922066] RBP: ffff95c9c16a41c0 R08: 0000000000000000 R09: 0000000000000000
[192922.922442] R10: ffffaebdc8a27e70 R11: 0000000000000000 R12: ffff95ca731a0980
[192922.922820] R13: 0000000000000000 R14: ffff95ca84c73338 R15: ffff95ca731a0ea8
[192922.923200] FS: 00007f337eda4e80(0000) GS:ffff95cab6b00000(0000) knlGS:0000000000000000
[192922.923579] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[192922.923948] CR2: 00007f337edad000 CR3: 00000001e00f6002 CR4: 00000000003606e0
[192922.924329] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[192922.924711] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[192922.925105] Call Trace:
[192922.925505] btrfs_trans_release_metadata+0x10c/0x170 [btrfs]
[192922.925911] btrfs_commit_transaction+0x3e/0xaf0 [btrfs]
[192922.926324] btrfs_sync_file+0x44c/0x490 [btrfs]
[192922.926731] do_fsync+0x38/0x60
[192922.927138] __x64_sys_fdatasync+0x13/0x20
[192922.927543] do_syscall_64+0x60/0x1c0
[192922.927939] entry_SYSCALL_64_after_hwframe+0x49/0xbe
(...)
[192922.934077] ---[ end trace f00808b12068168f ]---
2) If evict_refill_and_join() decides to commit the transaction, it will
be able to do it, since the nested transaction join only increments the
transaction handle's ->use_count reference counter and it does not
prevent the transaction from getting committed. This means that after
eviction completes, the fsync logging path will be using a transaction
handle that refers to an already committed transaction. What happens
when using such a stale transaction can be unpredictable, we are at
least having a use-after-free on the transaction handle itself, since
the transaction commit will call kmem_cache_free() against the handle
regardless of its ->use_count value, or we can end up silently losing
all the updates to the log tree after that iput() in the logging path,
or using a transaction handle that in the meanwhile was allocated to
another task for a new transaction, etc, pretty much unpredictable
what can happen.
In order to fix both of them, instead of using iput() during logging, use
btrfs_add_delayed_iput(), so that the logging path of fsync never drops
the last reference on an inode, that step is offloaded to a safe context
(usually the cleaner kthread).
The assertion failure issue was sporadically triggered by the test case
generic/475 from fstests, which loads the dm error target while fsstress
is running, which lead to fsync failing while logging inodes with -EIO
errors and then trying later to commit the transaction, triggering the
assertion failure.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When doing any form of incremental send the parent and the child trees
need to be compared via btrfs_compare_trees. This can result in long
loop chains without ever relinquishing the CPU. This causes softlockup
detector to trigger when comparing trees with a lot of items. Example
report:
watchdog: BUG: soft lockup - CPU#0 stuck for 24s! [snapperd:16153]
CPU: 0 PID: 16153 Comm: snapperd Not tainted 5.2.9-1-default #1 openSUSE Tumbleweed (unreleased)
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
pstate: 40000005 (nZcv daif -PAN -UAO)
pc : __ll_sc_arch_atomic_sub_return+0x14/0x20
lr : btrfs_release_extent_buffer_pages+0xe0/0x1e8 [btrfs]
sp : ffff00001273b7e0
Call trace:
__ll_sc_arch_atomic_sub_return+0x14/0x20
release_extent_buffer+0xdc/0x120 [btrfs]
free_extent_buffer.part.0+0xb0/0x118 [btrfs]
free_extent_buffer+0x24/0x30 [btrfs]
btrfs_release_path+0x4c/0xa0 [btrfs]
btrfs_free_path.part.0+0x20/0x40 [btrfs]
btrfs_free_path+0x24/0x30 [btrfs]
get_inode_info+0xa8/0xf8 [btrfs]
finish_inode_if_needed+0xe0/0x6d8 [btrfs]
changed_cb+0x9c/0x410 [btrfs]
btrfs_compare_trees+0x284/0x648 [btrfs]
send_subvol+0x33c/0x520 [btrfs]
btrfs_ioctl_send+0x8a0/0xaf0 [btrfs]
btrfs_ioctl+0x199c/0x2288 [btrfs]
do_vfs_ioctl+0x4b0/0x820
ksys_ioctl+0x84/0xb8
__arm64_sys_ioctl+0x28/0x38
el0_svc_common.constprop.0+0x7c/0x188
el0_svc_handler+0x34/0x90
el0_svc+0x8/0xc
Fix this by adding a call to cond_resched at the beginning of the main
loop in btrfs_compare_trees.
Fixes: 7069830a9e ("Btrfs: add btrfs_compare_trees function")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Those function are simple boolean predicates there is no need to assign
their return values to interim variables. Use them directly as
predicates. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Create a structure to encode the type and length for the known on-disk
checksums. This makes it easier to add new checksums later.
The structure and helpers are moved from ctree.h so they don't occupy
space in all headers including ctree.h. This save some space in the
final object.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When debugging weird enospc problems it's handy to be able to dump the
space info when we wake up all tickets, and see what the ticket values
are. This helped me figure out cases where we were enospc'ing when we
shouldn't have been.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We ran into a problem in production where a box with plenty of space was
getting wedged doing ENOSPC flushing. These boxes only had 20% of the
disk allocated, but their metadata space + global reserve was right at
the size of their metadata chunk.
In this case can_overcommit should be allowing allocations without
problem, but there's logic in can_overcommit that doesn't allow us to
overcommit if there's not enough real space to satisfy the global
reserve.
This is for historical reasons. Before there were only certain places
we could allocate chunks. We could go to commit the transaction and not
have enough space for our pending delayed refs and such and be unable to
allocate a new chunk. This would result in a abort because of ENOSPC.
This code was added to solve this problem.
However since then we've gained the ability to always be able to
allocate a chunk. So we can easily overcommit in these cases without
risking a transaction abort because of ENOSPC.
Also prior to now the global reserve really would be used because that's
the space we relied on for delayed refs. With delayed refs being
tracked separately we no longer have to worry about running out of
delayed refs space while committing. We are much less likely to
exhaust our global reserve space during transaction commit.
Fix the can_overcommit code to simply see if our current usage + what we
want is less than our current free space plus whatever slack space we
have in the disk is. This solves the problem we were seeing in
production and keeps us from flushing as aggressively as we approach our
actual metadata size usage.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have some annoying xfstests tests that will create a very small fs,
fill it up, delete it, and repeat to make sure everything works right.
This trips btrfs up sometimes because we may commit a transaction to
free space, but most of the free metadata space was being reserved by
the global reserve. So we commit and update the global reserve, but the
space is simply added to bytes_may_use directly, instead of trying to
add it to existing tickets. This results in ENOSPC when we really did
have space. Fix this by calling btrfs_try_granting_tickets once we add
back our excess space to wake any pending tickets.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While messing with the overcommit logic I noticed that sometimes we'd
ENOSPC out when really we should have run out of space much earlier. It
turns out it's because we'll only reserve up to the free amount left in
the space info for the global reserve, but that doesn't make sense with
overcommit because we could be well above our actual size. This results
in the global reserve not carving out it's entire reservation, and thus
not putting enough pressure on the rest of the infrastructure to do the
right thing and ENOSPC out at a convenient time. Fix this by always
taking our full reservation amount for the global reserve.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It made sense to have the global reserve set at 16M in the past, but
since it is used less nowadays set the minimum size to the number of
items we'll need to update the main trees we update during a transaction
commit, plus some slop area so we can do unlinks if we need to.
In practice this doesn't affect normal file systems, but for xfstests
where we do things like fill up a fs and then rm * it can fall over in
weird ways. This enables us for more sane behavior at extremely small
file system sizes.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This name doesn't really fit with how the space reservation stuff works
now, rename it to btrfs_space_info_free_bytes_may_use so it's clear what
the function is doing.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we do not do partial filling of tickets simply remove
orig_bytes, it is no longer needed.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we aren't partially filling tickets we may have some slack
space left in the space_info. We need to account for this in
may_commit_transaction, otherwise we may choose to not commit the
transaction despite it actually having enough space to satisfy our
ticket.
Calculate the free space we have in the space_info, if any, and subtract
this from the ticket we have and use that amount to determine if we will
need to commit to reclaim enough space.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we no longer partially fill tickets we need to rework
wake_all_tickets to call btrfs_try_to_wakeup_tickets() in order to see
if any subsequent tickets are able to be satisfied. If our tickets_id
changes we know something happened and we can keep flushing.
Also if we find a ticket that is smaller than the first ticket in our
queue then we want to retry the flushing loop again in case
may_commit_transaction() decides we could satisfy the ticket by
committing the transaction.
Rename this to maybe_fail_all_tickets() while we're at it, to better
reflect what the function is actually doing.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that btrfs_space_info_add_old_bytes simply checks if we can make the
reservation and updates bytes_may_use, there's no reason to have both
helpers in place.
Factor out the ticket wakeup logic into it's own helper, make
btrfs_space_info_add_old_bytes() update bytes_may_use and then call the
wakeup helper, and replace all calls to btrfs_space_info_add_new_bytes()
with the wakeup helper.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_space_info_add_old_bytes is used when adding the extra space from
an existing reservation back into the space_info to be used by any
waiting tickets. In order to keep us from overcommitting we check to
make sure that we can still use this space for our reserve ticket, and
if we cannot we'll simply subtract it from space_info->bytes_may_use.
However this is problematic, because it assumes that only changes to
bytes_may_use would affect our ability to make reservations. Any
changes to bytes_reserved would be missed. If we were unable to make a
reservation prior because of reserved space, but that reserved space was
free'd due to unlink or truncate and we were allowed to immediately
reclaim that metadata space we would still ENOSPC.
Consider the example where we create a file with a bunch of extents,
using up 2MiB of actual space for the new tree blocks. Then we try to
make a reservation of 2MiB but we do not have enough space to make this
reservation. The iput() occurs in another thread and we remove this
space, and since we did not write the blocks we simply do
space_info->bytes_reserved -= 2MiB. We would never see this because we
do not check our space info used, we just try to re-use the freed
reservations.
To fix this problem, and to greatly simplify the wakeup code, do away
with this partial refilling nonsense. Use
btrfs_space_info_add_old_bytes to subtract the reservation from
space_info->bytes_may_use, and then check the ticket against the total
used of the space_info the same way we do with the initial reservation
attempt.
This keeps the reservation logic consistent and solves the problem of
early ENOSPC in the case that we free up space in places other than
bytes_may_use and bytes_pinned. Thanks,
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
I noticed when folding the trace_btrfs_space_reservation() tracepoint
into the btrfs_space_info_update_* helpers that we didn't emit a
tracepoint when doing btrfs_add_reserved_bytes(). I know this is
because we were swapping bytes_may_use for bytes_reserved, so in my mind
there was no reason to have the tracepoint there. But now there is
because we always emit the unreserve for the bytes_may_use side, and
this would have broken if compression was on anyway. Add a tracepoint
to cover the bytes_reserved counter so the math still comes out right.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We duplicate this tracepoint everywhere we call these helpers, so update
the helper to have the tracepoint as well.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we already have tickets on the list we don't want to steal their
reservations. This is a preparation patch for upcoming changes,
technically this shouldn't happen today because of the way we add bytes
to tickets before adding them to the space_info in most cases.
This does not change the FIFO nature of reserve tickets, it simply
allows us to enforce it in a different way. Previously it was enforced
because any new space would be added to the first ticket on the list,
which would result in new reservations getting a reserve ticket. This
replaces that mechanism by simply checking to see if we have outstanding
reserve tickets and skipping straight to adding a ticket for our
reservation.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since commit fee187d9d9 ("Btrfs: do not set EXTENT_DIRTY along with
EXTENT_DELALLOC"), we never set EXTENT_DIRTY in inode->io_tree, so we
can simplify and stop trying to clear it.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The VFS indicates a synchronous write to ->write_iter() via
iocb->ki_flags. The IOCB_{,D}SYNC flags may be set based on the file
(see iocb_flags()) or the RWF_* flags passed to a syscall like
pwritev2() (see kiocb_set_rw_flags()).
However, in btrfs_file_write_iter(), we're checking if a write is
synchronous based only on the file; we use this to decide when to bump
the sync_writers counter and thus do CRCs synchronously. Make sure we do
this for all synchronous writes as determined by the VFS.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add const ]
Signed-off-by: David Sterba <dsterba@suse.com>
generic_write_checks() may modify iov_iter_count(), so we must get the
count after the call, not before. Using the wrong one has a couple of
consequences:
1. We check a longer range in check_can_nocow() for nowait than we're
actually writing.
2. We create extra hole extent maps in btrfs_cont_expand(). As far as I
can tell, this is harmless, but I might be missing something.
These issues are pretty minor, but let's fix it before something more
important trips on it.
Fixes: edf064e7c6 ("btrfs: nowait aio support")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Further simplifaction of the get/set helpers is possible when the token
is uniquely tied to an extent buffer. A condition and an assignment can
be avoided.
The initializations are moved closer to the first use when the extent
buffer is valid. There's one exception in __push_leaf_left where the
token is reused.
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we can safely assume that the token is always a valid pointer,
remove the branches that check that.
Signed-off-by: David Sterba <dsterba@suse.com>
There are helpers for all type widths defined via macro and optionally
can use a token which is a cached pointer to avoid repeated mapping of
the extent buffer.
The token value is known at compile time, when it's valid it's always
address of a local variable, otherwise it's NULL passed by the
token-less helpers.
This can be utilized to remove some branching as the helpers are used
frequenlty.
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_find_name_in_ext_backref returns either 0/1 depending on whether it
found a backref for the given name. If it returns true then the actual
inode_ref struct is returned in one of its parameters. That's pointless,
instead refactor the function such that it returns either a pointer
to the btrfs_inode_extref or NULL it it didn't find anything. This
streamlines the function calling convention.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_find_name_in_backref returns either 0/1 depending on whether it
found a backref for the given name. If it returns true then the actual
inode_ref struct is returned in one of its parameters. That's pointless,
instead refactor the function such that it returns either a pointer
to the btrfs_inode_ref or NULL it it didn't find anything. This
streamlines the function calling convention.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The other dev stats functions are already there and the helpers are not
used by anything else.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
The io_ctl structure is used for free space management, and used only by
the v1 space cache code, but unfortunatlly the full definition is
required by block-group.h so it can't be moved to free-space-cache.c
without additional changes.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Send is the only user of tree_compare, we can move it there along with
the other helpers and definitions.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Preparatory work for code that will be moved out of ctree and uses this
function.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
The file ctree.h serves as a header for everything and has become quite
bloated. Split some helpers that are generic and create a new file that
should be the catch-all for code that's not btrfs-specific.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Fix the fake ENOMEM return error code to the actual error in
clone_fs_devices().
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In a corrupted tree, if search for next devid finds the device with
devid = -1, then report the error -EUCLEAN back to the parent function
to fail gracefully.
The tree checker will not catch this in case the devids are created
using the following script:
umount /btrfs
dev1=/dev/sdb
dev2=/dev/sdc
mkfs.btrfs -fq -dsingle -msingle $dev1
mount $dev1 /btrfs
_fail()
{
echo $1
exit 1
}
while true; do
btrfs dev add -f $dev2 /btrfs || _fail "add failed"
btrfs dev del $dev1 /btrfs || _fail "del failed"
dev_tmp=$dev1
dev1=$dev2
dev2=$dev_tmp
done
With output:
BTRFS critical (device sdb): corrupt leaf: root=3 block=313739198464 slot=1 devid=1 invalid devid: has=507 expect=[0, 506]
BTRFS error (device sdb): block=313739198464 write time tree block corruption detected
BTRFS: error (device sdb) in btrfs_commit_transaction:2268: errno=-5 IO failure (Error while writing out transaction)
BTRFS warning (device sdb): Skipping commit of aborted transaction.
BTRFS: error (device sdb) in cleanup_transaction:1827: errno=-5 IO failure
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
[ add script and messages ]
Signed-off-by: David Sterba <dsterba@suse.com>
Various notifications of type "BUG kmalloc-4096 () : Redzone
overwritten" have been observed recently in various parts of the kernel.
After some time, it has been made a relation with the use of BTRFS
filesystem and with SLUB_DEBUG turned on.
[ 22.809700] BUG kmalloc-4096 (Tainted: G W ): Redzone overwritten
[ 22.810286] INFO: 0xbe1a5921-0xfbfc06cd. First byte 0x0 instead of 0xcc
[ 22.810866] INFO: Allocated in __load_free_space_cache+0x588/0x780 [btrfs] age=22 cpu=0 pid=224
[ 22.811193] __slab_alloc.constprop.26+0x44/0x70
[ 22.811345] kmem_cache_alloc_trace+0xf0/0x2ec
[ 22.811588] __load_free_space_cache+0x588/0x780 [btrfs]
[ 22.811848] load_free_space_cache+0xf4/0x1b0 [btrfs]
[ 22.812090] cache_block_group+0x1d0/0x3d0 [btrfs]
[ 22.812321] find_free_extent+0x680/0x12a4 [btrfs]
[ 22.812549] btrfs_reserve_extent+0xec/0x220 [btrfs]
[ 22.812785] btrfs_alloc_tree_block+0x178/0x5f4 [btrfs]
[ 22.813032] __btrfs_cow_block+0x150/0x5d4 [btrfs]
[ 22.813262] btrfs_cow_block+0x194/0x298 [btrfs]
[ 22.813484] commit_cowonly_roots+0x44/0x294 [btrfs]
[ 22.813718] btrfs_commit_transaction+0x63c/0xc0c [btrfs]
[ 22.813973] close_ctree+0xf8/0x2a4 [btrfs]
[ 22.814107] generic_shutdown_super+0x80/0x110
[ 22.814250] kill_anon_super+0x18/0x30
[ 22.814437] btrfs_kill_super+0x18/0x90 [btrfs]
[ 22.814590] INFO: Freed in proc_cgroup_show+0xc0/0x248 age=41 cpu=0 pid=83
[ 22.814841] proc_cgroup_show+0xc0/0x248
[ 22.814967] proc_single_show+0x54/0x98
[ 22.815086] seq_read+0x278/0x45c
[ 22.815190] __vfs_read+0x28/0x17c
[ 22.815289] vfs_read+0xa8/0x14c
[ 22.815381] ksys_read+0x50/0x94
[ 22.815475] ret_from_syscall+0x0/0x38
Commit 69d2480456 ("btrfs: use copy_page for copying pages instead of
memcpy") changed the way bitmap blocks are copied. But allthough bitmaps
have the size of a page, they were allocated with kzalloc().
Most of the time, kzalloc() allocates aligned blocks of memory, so
copy_page() can be used. But when some debug options like SLAB_DEBUG are
activated, kzalloc() may return unaligned pointer.
On powerpc, memcpy(), copy_page() and other copying functions use
'dcbz' instruction which provides an entire zeroed cacheline to avoid
memory read when the intention is to overwrite a full line. Functions
like memcpy() are writen to care about partial cachelines at the start
and end of the destination, but copy_page() assumes it gets pages. As
pages are naturally cache aligned, copy_page() doesn't care about
partial lines. This means that when copy_page() is called with a
misaligned pointer, a few leading bytes are zeroed.
To fix it, allocate bitmaps through kmem_cache instead of using kzalloc()
The cache pool is created with PAGE_SIZE alignment constraint.
Reported-by: Erhard F. <erhard_f@mailbox.org>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204371
Fixes: 69d2480456 ("btrfs: use copy_page for copying pages instead of memcpy")
Cc: stable@vger.kernel.org # 4.19+
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: David Sterba <dsterba@suse.com>
[ rename to btrfs_free_space_bitmap ]
Signed-off-by: David Sterba <dsterba@suse.com>
Support for asynchronous snapshot creation was originally added in
72fd032e94 ("Btrfs: add SNAP_CREATE_ASYNC ioctl") to cater for
ceph's backend needs. However, since Ceph has deprecated support for
btrfs there is no longer need for that support in btrfs. Additionally,
this was never supported by btrfs-progs, the official userspace tools.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Correctly handle failure cases when adding an ordered extents in case
of REGULAR or PREALLOC extents. Remove the BUG_ON.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a comment explaining why we keep the BUG also use the already read
and cached value of extent ram bytes stored in 'ram_bytes'.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The extent range check right after the "out_check" label is redundant,
because the only way it can trigger is if we have an inline extent. In
this case it makes more sense to actually move it in the branch
explictly dealing with inlines extents.
What's more, the nested 'if (nocow)' can never be true because for
inline extents we always do COW and there is no chance 'nocow' can be
true, just remove that check.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is no point in checking the type of the extent again just to set
the 'type' variable, when this check has already been performed before.
Instead, extend the original if branch with an 'else' clause. This
allows to remove one local variable and make it obvious how the code
flow differs for prealloc/regular extents.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
run_delalloc_nocow contains numerous, somewhat subtle, checks when
figuring out whether a particular extent should be CoW'ed or not. This
patch explicitly states the assumptions those checks verify. As a
result also document 2 of the more subtle checks in check_committed_ref
as well.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
