commit aeec6cc082 ("ASoC: Intel: bytcr_rt5651: Configure PLL1 before
using it") is using codec->dev, but codec is replaced to component.
Let's use component
Fixes: aeec6cc082 ("ASoC: Intel: bytcr_rt5651: Configure PLL1 before using it")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the topology kcontrol string handling so that string pointer
references are strdup()ed instead of being copied. This fixes issues
with kcontrol templates on the stack or ones that are freed. Remember
and free the strings too when topology is unloaded.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Commit 24069b589b ("ASoC: hdmi-codec: remove multi detection support")
changed the dai_name for the HDMI Codec, breaking the rk3288_hdmi_analog
driver, which fails to register with a:
rk3288-snd-hdmi-analog sound: ASoC: CODEC DAI hdmi-hifi.0 not registered
This commit fixes the dai_name, fixing the issue.
Fixes: 24069b589b ("ASoC: hdmi-codec: remove multi detection support")
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
SSM2602 driver is broken on recent kernels (at least
since 4.9). User space applications such as amixer or
alsamixer get EIO when attempting to access codec
controls via the relevant IOCTLs.
Root cause of these failures is the regcache_hw_init
function in drivers/base/regmap/regcache.c, which
prevents regmap cache initalization from the
reg_defaults_raw element of the regmap_config structure
when registers are write only. It also disables the
regmap cache entirely when all registers are write only
or volatile as is the case for the SSM2602 driver.
Using the reg_defaults element of the regmap_config
structure rather than the reg_defaults_raw element to
initalize the regmap cache avoids the logic in the
regcache_hw_init function entirely. It also makes this
driver consistent with other ASoC codec drivers, as
this driver was the ONLY codec driver that used the
reg_defaults_raw element to initalize the cache.
Tested on Digilent Zybo Z7 development board which has
a SSM2603 codec chip connected to a Xilinx Zynq SoC.
Signed-off-by: James Kelly <jamespeterkelly@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
When driver register its component to ALSA SoC, almost all drivers are
using snd_soc_register_component(), but soc-generic-dmaengine-pcm is
using snd_soc_add_component().
Existing component function had been assumed that registered component
was allocated, and it calling kfree() for it.
But, the user who used snd_soc_add_component() doesn't.
This patch uses devm_kzalloc() instead of kzalloc() for component,
and doesn't call kree() anymore.
This patch fixes commit be7ee5f32a ("ASoC: soc-generic-dmaengine-pcm:
replace platform to component").
Allwinner H3 SoC will crash without this patch.
Thanks Jernej report.
Reported-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
Improve the DPCM BE search debug output to make it easier to debug
issues in topologies.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Now when a helper for unreferencing device nodes is available
we can get rid of the local implementation.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The I2S controller can handle sample rates only up to 96000 and the CPU DAI
has already related constraint set so drop the impossible 176400, 192000
switch cases.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
In case of sample rates lower than 44100 currently there is too low MCLK
frequency set for the CODEC. Playback fails with following errors:
$ speaker-test -c2 -t sine -f 1500 -l2 -r 32000
Sine wave rate is 1500.0000Hz
Rate set to 32000Hz (requested 32000Hz)
Buffer size range from 128 to 131072
Period size range from 64 to 65536
Using max buffer size 131072
Periods = 4
Unable to set hw params for playback: Invalid argument
Setting of hwparams failed: Invalid argument
[ 497.883700] max98090 1-0010: Invalid master clock frequency
To fix this the I2S root clock's frequency is increased, depending
on sampling rate.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add Texas Instruments's PCM1789 DAC support.
It is a simple DAC and does not have many registers.
One particularity about this DAC is that the clocks must be
always enabled. Also, an entire software reset is necessary
while starting to play a sound otherwise, the clocks are not
synchronized (so the DAC is not able to send data).
Signed-off-by: Mylène Josserand <mylene.josserand@bootlin.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
It's not necessary to unregister a component registered
with devm_snd_soc_register_component().
Fixes: f1b5bf0736 ("ASoC: mt2701/mt8173: replace platform to componen")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Purpose of having pinctrl dapm is to dynamically put the pins in
low power state when they are not actively used by the audio and
saving power.
Without this each driver has to set the pinctrl states, either
during probe or dynamically depending on the callbacks received
from ASoC core.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to achieve better DMA performance and reduce download time for
firmware and library, it is recommended to disable dynamic clock and
power gating. In some scenarios, DMA may wait to accumulate more data and
last chunk of data never gets completed if dynamic clock and power
gating is kept enabled.
This patch adds support to disable/enable dynamic clock and power gating
and use it during firmware and library download.
Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com>
Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch updates the driver so, in addition to current DT bindings, it
also can also use the new DT bindings with cpu, codec subnodes which allow
to support sound on the HDMI interface.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The RCLKSRC mux input 0 is a default configuration after reset, so
there is no need for this explicit snd_soc_dai_set_sysclk() call.
Also, this static mux clock configuration can be specified in DT.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
As the RCLK clock may be updated through the common clk API before each
snd_soc_dai_ops::trigger call, it is not enough to update i2s->rclk_srcrate
only once after it has been initially set to 0. To avoid wrong PSR values
we always get RCLK frequency from the CLK_I2S_RCLK_SRC clock, when that
clock is available.
Fixes: e1417fdf3011 "ASoC: samsung: i2s: Ensure the RCLK rate is properly determined"
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The code for dereferencing device nodes in the 'codecs' array is moved
to a separate function so we can avoid open coding that in drivers.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
After the codec to component conversion codecs with custom read/write
function will no longer able to use update_bits as their io callbacks are
registered at component->driver level and not in component level.
To not complicate the code further, lets just use the
snd_soc_component_read/snd_soc_component_write function and let them sort
out the correct io function to call.
Fixes: d0ff8ba57d ("ASoC: add Component level .read/.write")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The control register for ADC L2 and R2 is RT5659_PWR_DIG_1
not RT5659_PWR_DIG_2.
Signed-off-by: Zhong An <zhongan@pinecone.net>
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
RT5659_PWR_ADC_L2_BIT should be 2.
Signed-off-by: Zhong An <zhongan@pinecone.net>
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Moved 16bit resolution condition check for stoney platform
to acp_hw_params.Depending upon substream required register
value need to be programmed rather than enabling 16bit resolution
support all time in acp init.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The Odroid boards are manufactured by Hardkernel, not Samsung. New compatible
string entries are added, with "hardkernel," instead of "samsung," vendor
prefix. Support for the old compatible strings is going to be removed after
some time.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
When the BYT_RT5651_MCLK_EN quirk is set, we disable the MCLK from
byt_rt5651_init(), we need to select the RCCLK as sysclk before doing this
to make sure that jack-detect works directly after boot.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the default quirk settings to enable jack-detect, analog mics.
The old default input mapping of DMIC for non Bay Trail CR devices seems
like a poor default as I'm not aware of any Intel SST + rt5651 using
devices with a DMIC.
All Cherry Trail devices using the bytcr_rt5651 machine driver seem to be
modelled after BYT-CR devices, And the only non CR Bay Trail devices with
a rt5651 codec I'm aware of are the Minnow boards for which we already have
board specific quirks. So it seems better to me to use the BYT-CR defaults
everywhere.
This e.g. makes the Chuwi Hi8 Pro (CWI513) work ootb without needing a
quirk.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a quirk setting up jack-detect and input routing for the
VIOS LTH17 laptop.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Despite its name being prefixed with bytcr, before this commit the
bytcr_rt5651 machine driver could not work with Bay Trail CR boards,
as those only have SSP0 and it only supported SSP0-AIF1 setups.
This commit adds support for this, autodetecting AIF1 vs AIF2 based on
BIOS tables.
While at it also add support for SSP2-AIF2 setups, as that requires only
minimal extra code on top of the code adding SSP0-AIF1 / SSP0-AIF2 support.
Note this code is all copy-pasted from bytcr_rt5640.c. I've looked into
merging the 2 machine drivers into 1 to avoid copy-pasting, but there are
enough subtile differences to make this hard *and* with all the quirks the
machine driver already is full with if (variant-foo) then ... else ...
constructs adding more of these is going to make the code unreadable.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new IN2_HS_IN3 input map and add a quirk for the input mapping and
jack-detect source for the Chuwi Vi8 Plus tablet, which uses this new map.
Note the Chuwi Vi8 Plus lists an extra GPIO in its codecs ACPI resources
which needs to be driven high to enable the external speaker amplifier,
this is not supported yet and will be fixed in a future patch.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
All the mappings are named for where the internal mic is routed and in that
sense the newly added in3_map really is the same as in1_map, what makes it
different is that it maps the headset mic at IN3 rather then at IN2.
Rename in3_map to in1_hs_in3_map to better reflect what it actually does.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Drop the snd_soc_dai_set_bclk_ratio() call, the rt5651 dai does not have a
set_bclk_ratio() op, so it is a nop (and returns -EINVAL).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When platform_clock_control() first selects PLL1 as sysclk the PLL_CTRL
registers have not been setup yet and we effectively have an invalid clock
configuration until byt_rt5651_aif1_hw_params() gets called.
Add a new byt_rt5651_prepare_and_enable_pll1() helper and use that from
both platform_clock_control() and byt_rt5651_aif1_hw_params() to fix this.
Tested-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
