From the result of a function test of mmap, mmap write to shared pages
turned out to be broken for hole blocks. It doesn't write out filled
blocks and the data will be lost after umount. This is due to a bug
that the target file is not queued for log writer when filling hole
blocks.
Also, nilfs_page_mkwrite function exits normal code path even after
successfully filled hole blocks due to a change of block_page_mkwrite
function; just after nilfs was merged into the mainline,
block_page_mkwrite() started to return VM_FAULT_LOCKED instead of zero
by the patch "mm: close page_mkwrite races" (commit:
b827e496c8). The current nilfs_page_mkwrite() is not handling
this value properly.
This corrects nilfs_page_mkwrite() and will resolve the data loss
problem in mmap write.
[This should be applied to every kernel since 2.6.30 but a fix is
needed for 2.6.37 and prior kernels]
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: stable <stable@kernel.org> [2.6.38]
This makes the base64 logic be contained in mount option parsing,
and prepares us for replacing the homebew key management with the
kernel key retention service.
Signed-off-by: Tommi Virtanen <tommi.virtanen@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
Fix the incorrect use of igrab() inside the i_lock in NFS and Ceph‥
If we are already holding the i_lock, we have a reference to the
inode so we can safely use ihold() to gain an extra reference. This
avoids hangs due to lock recursion on the i_lock now that the
inode_lock is gone and igrab() uses the i_lock itself.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
xfs: stop using the page cache to back the buffer cache
xfs: register the inode cache shrinker before quotachecks
xfs: xfs_trans_read_buf() should return an error on failure
xfs: introduce inode cluster buffer trylocks for xfs_iflush
vmap: flush vmap aliases when mapping fails
xfs: preallocation transactions do not need to be synchronous
Fix up trivial conflicts in fs/xfs/linux-2.6/xfs_buf.c due to plug removal.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6:
eCryptfs: write lock requested keys
eCryptfs: move ecryptfs_find_auth_tok_for_sig() call before mutex_lock
eCryptfs: verify authentication tokens before their use
eCryptfs: modified size of keysig in the ecryptfs_key_sig structure
eCryptfs: removed num_global_auth_toks from ecryptfs_mount_crypt_stat
eCryptfs: ecryptfs_keyring_auth_tok_for_sig() bug fix
eCryptfs: Unlock page in write_begin error path
ecryptfs: modify write path to encrypt page in writepage
eCryptfs: Remove ECRYPTFS_NEW_FILE crypt stat flag
eCryptfs: Remove unnecessary grow_file() function
* 'for-linus-unmerged' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (45 commits)
Btrfs: fix __btrfs_map_block on 32 bit machines
btrfs: fix possible deadlock by clearing __GFP_FS flag
btrfs: check link counter overflow in link(2)
btrfs: don't mess with i_nlink of unlocked inode in rename()
Btrfs: check return value of btrfs_alloc_path()
Btrfs: fix OOPS of empty filesystem after balance
Btrfs: fix memory leak of empty filesystem after balance
Btrfs: fix return value of setflags ioctl
Btrfs: fix uncheck memory allocations
btrfs: make inode ref log recovery faster
Btrfs: add btrfs_trim_fs() to handle FITRIM
Btrfs: adjust btrfs_discard_extent() return errors and trimmed bytes
Btrfs: make btrfs_map_block() return entire free extent for each device of RAID0/1/10/DUP
Btrfs: make update_reserved_bytes() public
btrfs: return EXDEV when linking from different subvolumes
Btrfs: Per file/directory controls for COW and compression
Btrfs: add datacow flag in inode flag
btrfs: use GFP_NOFS instead of GFP_KERNEL
Btrfs: check return value of read_tree_block()
btrfs: properly access unaligned checksum buffer
...
Fix up trivial conflicts in fs/btrfs/volumes.c due to plug removal in
the block layer.
When a hole spans across page boundaries, the next write forces
a read of the block. This could end up reading existing garbage
data from the disk in ocfs2_map_page_blocks. This leads to
non-zero holes. In order to avoid this, mark the writes as new
when the holes span across page boundaries.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.de>
Signed-off-by: jlbec <jlbec@evilplan.org>
When CONFIG_DEBUG_FS=y and CONFIG_OCFS2_FS_STATS=n, we get the
following warning:
fs/ocfs2/cluster/tcp.c:213:16: warning: ‘o2net_get_func_run_time’
defined but not used
Since o2net_get_func_run_time is only called from
o2net_update_recv_stats, so move it under CONFIG_OCFS2_FS_STATS.
Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Signed-off-by: jlbec <jlbec@evilplan.org>
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
NFS: Ensure that rpc_release_resources_task() can be called twice.
NFS: Don't leak RPC clients in NFSv4 secinfo negotiation
NFS: Fix a hang in the writeback path
Recent changes for discard support didn't compile,
this fixes them not to try and % 64 bit numbers.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Using the GFP_HIGHUSER_MOVABLE flag to allocate the metadata's page may cause
deadlock.
Task1
open()
...
btrfs_search_slot()
...
btrfs_cow_block()
...
alloc_page()
wait for reclaiming
shrink_slab()
...
shrink_icache_memory()
...
btrfs_evict_inode()
...
btrfs_search_slot()
If the path is locked by task1, the deadlock happens.
So the btree's page cache is different with the file's page cache, it can not
allocate pages by GFP_HIGHUSER_MOVABLE flag, we must clear __GFP_FS flag in
GFP_HIGHUSER_MOVABLE flag.
Reported-by: Itaru Kitayama <kitayama@cl.bb4u.ne.jp>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
old_inode is not locked; it's not safe to play with its link
count. Instead of bumping it and calling btrfs_unlink_inode(),
add a variant of the latter that does not do btrfs_drop_nlink()/
btrfs_update_inode(), call it instead of btrfs_inc_nlink()/
btrfs_unlink_inode() and do btrfs_update_inode() ourselves.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Adding the check on the return value of btrfs_alloc_path() to several places.
And, some of callers are modified by this change.
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
btrfs will remove unused block groups after balance.
When a empty filesystem is balanced, the block group with tag "DATA" may be
dropped, and after umount and mount again, it will not find "DATA" space_info
and lead to OOPS.
So we initial the necessary space_infos(DATA, SYSTEM, METADATA) to avoid OOPS.
Reported-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
After Josef's patch(commit 3c14874acc),
btrfs will exclude super bytes when reading block groups(by marking a extent
state UPTODATE). However, these bytes do not get freed while balance remove
unused block groups, and we won't process those removed ones any more, when
we do umount and unload the btrfs module, btrfs hits a memory leak.
This patch add the missing free operation.
Reproduce steps:
$ mkfs.btrfs disk
$ mount disk /mnt/btrfs -o loop
$ btrfs filesystem balance /mnt/btrfs
$ umount /mnt/btrfs
$ rmmod btrfs
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
setflags ioctl should return error when any checks fail.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
To make Btrfs code more robust, several return value checks where memory
allocation can fail are introduced. I use BUG_ON where I don't know how
to handle the error properly, which increases the number of using the
notorious BUG_ON, though.
Signed-off-by: Yoshinori Sano <yoshinori.sano@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
When we recover from crash via write-ahead log tree and process
the inode refs, for each btrfs_inode_ref item, we will
1) check if we already have a perfect match in fs/file tree, if
we have, then we're done.
2) search the corresponding back reference in fs/file tree, and
check all the names in this back reference to see if they are
also in the log to avoid conflict corners.
3) recover the logged inode refs to fs/file tree.
In current btrfs, however,
- for 2)'s check, once is enough, since the checked back reference
will remain unchanged after processing all the inode refs belonged
to the key.
- it has no need to do another 1) between 2) and 3).
I've made a small test to show how it improves,
$dd if=/dev/zero of=foobar bs=4K count=1
$sync
$make 100 hard links continuously, like ln foobar link_i
$fsync foobar
$echo b > /proc/sysrq-trigger
after reboot
$time mount DEV PATH
without patch:
real 0m0.285s
user 0m0.001s
sys 0m0.009s
with patch:
real 0m0.123s
user 0m0.000s
sys 0m0.010s
Changelog v1->v2:
- fix double free - pointed by David Sterba
Changelog v2->v3:
- adjust free order
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
We take an free extent out from allocator, trim it, then put it back,
but before we trim the block group, we should make sure the block group is
cached, so plus a little change to make cache_block_group() run without a
transaction.
Signed-off-by: Li Dongyang <lidongyang@novell.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Callers of btrfs_discard_extent() should check if we are mounted with -o discard,
as we want to make fitrim to work even the fs is not mounted with -o discard.
Also we should use REQ_DISCARD to map the free extent to get a full mapping,
last we only return errors if
1. the error is not a EOPNOTSUPP
2. no device supports discard
Signed-off-by: Li Dongyang <lidongyang@novell.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
btrfs_map_block() will only return a single stripe length, but we want the
full extent be mapped to each disk when we are trimming the extent,
so we add length to btrfs_bio_stripe and fill it if we are mapping for REQ_DISCARD.
Signed-off-by: Li Dongyang <lidongyang@novell.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Make the function public as we should update the reserved extents calculations
after taking out an extent for trimming.
Signed-off-by: Li Dongyang <lidongyang@novell.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
btrfs_link returns EPERM if a cross-subvolume link is attempted.
However, in this case I believe EXDEV to be the more appropriate value.
>From the link(2) man page:
EXDEV oldpath and newpath are not on the same mounted file system. (Linux
permits a file system to be mounted at multiple points, but link()
does not work across different mount points, even if the same file
system is mounted on both.)
This matters because an application may have different behaviors based on
return codes.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Data compression and data cow are controlled across the entire FS by mount
options right now. ioctls are needed to set this on a per file or per
directory basis. This has been proposed previously, but VFS developers
wanted us to use generic ioctls rather than btrfs-specific ones.
According to Chris's comment, there should be just one true compression
method(probably LZO) stored in the super. However, before this, we would
wait for that one method is stable enough to be adopted into the super.
So I list it as a long term goal, and just store it in ram today.
After applying this patch, we can use the generic "FS_IOC_SETFLAGS" ioctl to
control file and directory's datacow and compression attribute.
NOTE:
- The compression type is selected by such rules:
If we mount btrfs with compress options, ie, zlib/lzo, the type is it.
Otherwise, we'll use the default compress type (zlib today).
v1->v2:
- rebase to the latest btrfs.
v2->v3:
- fix a problem, i.e. when a file is set NOCOW via mount option, then this NOCOW
will be screwed by inheritance from parent directory.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
In the filesystem context, we must allocate memory by GFP_NOFS,
or we may start another filesystem operation and make kswap thread hang up.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This patch is checking return value of read_tree_block(),
and if it is NULL, error processing.
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
On Fri, Mar 18, 2011 at 11:56:53AM -0400, Chris Mason wrote:
> Thanks for fielding this one. Does put_unaligned_le32 optimize away on
> platforms with efficient access? It would be great if we didn't need
> the #ifdef.
(quicktest: assembly output is same for put_unaligned_le32 and direct
assignment on my x86_64)
I was originally following examples in
Documentation/unaligned-memory-access.txt. From other code it seems to me that
the define CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is intended for larger
portions of code. Macros/wrappers for {put,get}_unaligned* are chosen via
arch/<arch>/include/asm/unaligned.h accordingly, therefore it's safe to use
put_unaligned_le32 without the ifdef.
dave
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This patch changes some BUG_ON() to the error return.
(but, most callers still use BUG_ON())
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Tracepoints can provide insight into why btrfs hits bugs and be greatly
helpful for debugging, e.g
dd-7822 [000] 2121.641088: btrfs_inode_request: root = 5(FS_TREE), gen = 4, ino = 256, blocks = 8, disk_i_size = 0, last_trans = 8, logged_trans = 0
dd-7822 [000] 2121.641100: btrfs_inode_new: root = 5(FS_TREE), gen = 8, ino = 257, blocks = 0, disk_i_size = 0, last_trans = 0, logged_trans = 0
btrfs-transacti-7804 [001] 2146.935420: btrfs_cow_block: root = 2(EXTENT_TREE), refs = 2, orig_buf = 29368320 (orig_level = 0), cow_buf = 29388800 (cow_level = 0)
btrfs-transacti-7804 [001] 2146.935473: btrfs_cow_block: root = 1(ROOT_TREE), refs = 2, orig_buf = 29364224 (orig_level = 0), cow_buf = 29392896 (cow_level = 0)
btrfs-transacti-7804 [001] 2146.972221: btrfs_transaction_commit: root = 1(ROOT_TREE), gen = 8
flush-btrfs-2-7821 [001] 2155.824210: btrfs_chunk_alloc: root = 3(CHUNK_TREE), offset = 1103101952, size = 1073741824, num_stripes = 1, sub_stripes = 0, type = DATA
flush-btrfs-2-7821 [001] 2155.824241: btrfs_cow_block: root = 2(EXTENT_TREE), refs = 2, orig_buf = 29388800 (orig_level = 0), cow_buf = 29396992 (cow_level = 0)
flush-btrfs-2-7821 [001] 2155.824255: btrfs_cow_block: root = 4(DEV_TREE), refs = 2, orig_buf = 29372416 (orig_level = 0), cow_buf = 29401088 (cow_level = 0)
flush-btrfs-2-7821 [000] 2155.824329: btrfs_cow_block: root = 3(CHUNK_TREE), refs = 2, orig_buf = 20971520 (orig_level = 0), cow_buf = 20975616 (cow_level = 0)
btrfs-endio-wri-7800 [001] 2155.898019: btrfs_cow_block: root = 5(FS_TREE), refs = 2, orig_buf = 29384704 (orig_level = 0), cow_buf = 29405184 (cow_level = 0)
btrfs-endio-wri-7800 [001] 2155.898043: btrfs_cow_block: root = 7(CSUM_TREE), refs = 2, orig_buf = 29376512 (orig_level = 0), cow_buf = 29409280 (cow_level = 0)
Here is what I have added:
1) ordere_extent:
btrfs_ordered_extent_add
btrfs_ordered_extent_remove
btrfs_ordered_extent_start
btrfs_ordered_extent_put
These provide critical information to understand how ordered_extents are
updated.
2) extent_map:
btrfs_get_extent
extent_map is used in both read and write cases, and it is useful for tracking
how btrfs specific IO is running.
3) writepage:
__extent_writepage
btrfs_writepage_end_io_hook
Pages are cirtical resourses and produce a lot of corner cases during writeback,
so it is valuable to know how page is written to disk.
4) inode:
btrfs_inode_new
btrfs_inode_request
btrfs_inode_evict
These can show where and when a inode is created, when a inode is evicted.
5) sync:
btrfs_sync_file
btrfs_sync_fs
These show sync arguments.
6) transaction:
btrfs_transaction_commit
In transaction based filesystem, it will be useful to know the generation and
who does commit.
7) back reference and cow:
btrfs_delayed_tree_ref
btrfs_delayed_data_ref
btrfs_delayed_ref_head
btrfs_cow_block
Btrfs natively supports back references, these tracepoints are helpful on
understanding btrfs's COW mechanism.
8) chunk:
btrfs_chunk_alloc
btrfs_chunk_free
Chunk is a link between physical offset and logical offset, and stands for space
infomation in btrfs, and these are helpful on tracing space things.
9) reserved_extent:
btrfs_reserved_extent_alloc
btrfs_reserved_extent_free
These can show how btrfs uses its space.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
The pointer to the extent buffer for the root of each tree
is protected by a spinlock so that we can safely read the pointer
and take a reference on the extent buffer.
But now that the extent buffers are freed via RCU, we can safely
use rcu_read_lock instead.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
A requested key is write locked in order to prevent modifications on the
authentication token while it is being used.
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
The ecryptfs_find_auth_tok_for_sig() call is moved before the
mutex_lock(s->tfm_mutex) instruction in order to avoid possible deadlocks
that may occur by holding the lock on the two semaphores 'key->sem' and
's->tfm_mutex' in reverse order.
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Authentication tokens content may change if another requestor calls the
update() method of the corresponding key. The new function
ecryptfs_verify_auth_tok_from_key() retrieves the authentication token from
the provided key and verifies if it is still valid before being used to
encrypt or decrypt an eCryptfs file.
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
[tyhicks: Minor formatting changes]
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
The size of the 'keysig' array is incremented of one byte in order to make
room for the NULL character. The 'keysig' variable is used, in the function
ecryptfs_generate_key_packet_set(), to find an authentication token with
the given signature and is printed a debug message if it cannot be
retrieved.
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
This patch removes the 'num_global_auth_toks' field of the
ecryptfs_mount_crypt_stat structure, used to count the number of items in
the 'global_auth_tok_list' list. This variable is not needed because there
are no checks based upon it.
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
The pointer '(*auth_tok_key)' is set to NULL in case request_key()
fails, in order to prevent its use by functions calling
ecryptfs_keyring_auth_tok_for_sig().
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Cc: <stable@kernel.org>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Unlock the page in error path of ecryptfs_write_begin(). This may
happen, for example, if decryption fails while bring the page
up-to-date.
Cc: <stable@kernel.org>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Change the write path to encrypt the data only when the page is written to
disk in ecryptfs_writepage. Previously, ecryptfs encrypts the page in
ecryptfs_write_end which means that if there are multiple write requests to
the same page, ecryptfs ends up re-encrypting that page over and over again.
This patch minimizes the number of encryptions needed.
Signed-off-by: Thieu Le <thieule@chromium.org>
[tyhicks: Changed NULL .drop_inode sop pointer to generic_drop_inode]
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Now that grow_file() is not called in the ecryptfs_create() path, the
ECRYPTFS_NEW_FILE flag is no longer needed. It helped
ecryptfs_readpage() know not to decrypt zeroes that were read from the
lower file in the grow_file() path.
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
When creating a new eCryptfs file, the crypto metadata is written out
and then the lower file was being "grown" with 4 kB of encrypted zeroes.
I suspect that growing the encrypted file was to prevent an information
leak that the unencrypted file was empty. However, the unencrypted file
size is stored, in plaintext, in the metadata so growing the file is
unnecessary.
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Fix inode.c kernel-doc fatal error: 2 comment sections have the same name:
Error(fs/inode.c:1171): duplicate section name 'Note'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When m_start returns an error, the seq_file logic will still call m_stop
with that error entry, so we'd better make sure that we check it before
using it as a vma.
Introduced by commit ec6fd8a435 ("report errors in /proc/*/*map*
sanely"), which replaced NULL with various ERR_PTR() cases.
(On ia64, you happen to get a unaligned fault instead of a page fault,
since the address used is generally some random error code like -EPERM)
Reported-by: Anca Emanuel <anca.emanuel@gmail.com>
Reported-by: Tony Luck <tony.luck@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Américo Wang <xiyou.wangcong@gmail.com>
Cc: Stephen Wilson <wilsons@start.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that the inode scalability patches have been merged, it is no longer
safe to call igrab() under the inode->i_lock.
Now that we no longer call nfs_clear_request() until the nfs_page is
being freed, we know that we are always holding a reference to the
nfs_open_context, which again holds a reference to the path, and so
the inode cannot be freed until the last nfs_page has been removed
from the radix tree and freed.
We can therefore skip the igrab()/iput() altogether.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
I noticed that dio_end_io calls the appropriate endio function with an error,
but the endio functions don't actually do anything with that error, they assume
that if there was an error then the bio will not be uptodate. So if we had
checksum failures we would never pass back EIO. So if there is an error in our
endio functions make sure to clear the uptodate flag on the bio. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
When doing direct writes we store the checksums in the ordered sum stuff in the
ordered extent for writing them when the write completes, so we don't even use
the dip->csums array. So if we're writing, don't bother allocating dip->csums
since we won't use it anyway. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
This patch makes the free space cluster refilling code a little easier to
understand, and fixes some things with the bitmap part of it. Currently we
either want to refill a cluster with
1) All normal extent entries (those without bitmaps)
2) A bitmap entry with enough space
The current code has this ugly jump around logic that will first try and fill up
the cluster with extent entries and then if it can't do that it will try and
find a bitmap to use. So instead split this out into two functions, one that
tries to find only normal entries, and one that tries to find bitmaps.
This also fixes a suboptimal thing we would do with bitmaps. If we used a
bitmap we would just tell the cluster that we were pointing at a bitmap and it
would do the tree search in the block group for that entry every time we tried
to make an allocation. Instead of doing that now we just add it to the clusters
group.
I tested this with my ENOSPC tests and xfstests and it survived.
Signed-off-by: Josef Bacik <josef@redhat.com>
Now that the buffer cache has it's own LRU, we do not need to use
the page cache to provide persistent caching and reclaim
infrastructure. Convert the buffer cache to use alloc_pages()
instead of the page cache. This will remove all the overhead of page
cache management from setup and teardown of the buffers, as well as
needing to mark pages accessed as we find buffers in the buffer
cache.
By avoiding the page cache, we also remove the need to keep state in
the page_private(page) field for persistant storage across buffer
free/buffer rebuild and so all that code can be removed. This also
fixes the long-standing problem of not having enough bits in the
page_private field to track all the state needed for a 512
sector/64k page setup.
It also removes the need for page locking during reads as the pages
are unique to the buffer and nobody else will be attempting to
access them.
Finally, it removes the buftarg address space lock as a point of
global contention on workloads that allocate and free buffers
quickly such as when creating or removing large numbers of inodes in
parallel. This remove the 16TB limit on filesystem size on 32 bit
machines as the page index (32 bit) is no longer used for lookups
of metadata buffers - the buffer cache is now solely indexed by disk
address which is stored in a 64 bit field in the buffer.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Alex Elder <aelder@sgi.com>
During mount, we can do a quotacheck that involves a bulkstat pass
on all inodes. If there are more inodes in the filesystem than can
be held in memory, we require the inode cache shrinker to run to
ensure that we don't run out of memory.
Unfortunately, the inode cache shrinker is not registered until we
get to the end of the superblock setup process, which is after a
quotacheck is run if it is needed. Hence we need to register the
inode cache shrinker earlier in the mount process so that we don't
OOM during mount. This requires that we also initialise the syncd
work before we register the shrinker, so we nee dto juggle that
around as well.
While there, make sure that we have set up the block sizes in the
VFS superblock correctly before the quotacheck is run so that any
inodes that are cached as a result of the quotacheck have their
block size fields set up correctly.
Cc: stable@kernel.org
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Alex Elder <aelder@sgi.com>
When inside a transaction and we fail to read a buffer,
xfs_trans_read_buf returns a null buffer pointer and no error.
xfs_do_da_buf() checks the error return, but not the buffer, and as
a result this read failure condition causes a panic when it attempts
to dereference the non-existant buffer.
Make xfs_trans_read_buf() return the same error for this situation
regardless of whether it is in a transaction or not. This means
every caller does not need to check both the error return and the
buffer before proceeding to use the buffer.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Alex Elder <aelder@sgi.com>
There is an ABBA deadlock between synchronous inode flushing in
xfs_reclaim_inode and xfs_icluster_free. xfs_icluster_free locks the
buffer, then takes inode ilocks, whilst synchronous reclaim takes
the ilock followed by the buffer lock in xfs_iflush().
To avoid this deadlock, separate the inode cluster buffer locking
semantics from the synchronous inode flush semantics, allowing
callers to attempt to lock the buffer but still issue synchronous IO
if it can get the buffer. This requires xfs_iflush() calls that
currently use non-blocking semantics to pass SYNC_TRYLOCK rather
than 0 as the flags parameter.
This allows xfs_reclaim_inode to avoid the deadlock on the buffer
lock and detect the failure so that it can drop the inode ilock and
restart the reclaim attempt on the inode. This allows
xfs_ifree_cluster to obtain the inode lock, mark the inode stale and
release it and hence defuse the deadlock situation. It also has the
pleasant side effect of avoiding IO in xfs_reclaim_inode when it
tries to next reclaim the inode as it is now marked stale.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
On 32 bit systems, vmalloc space is limited and XFS can chew through
it quickly as the vmalloc space is lazily freed. This can result in
failure to map buffers, even when there is apparently large amounts
of vmalloc space available. Hence, if we fail to map a buffer, purge
the aliases that have not yet been freed to hopefuly free up enough
vmalloc space to allow a retry to succeed.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Preallocation and hole punch transactions are currently synchronous
and this is causing performance problems in some cases. The
transactions don't need to be synchronous as we don't need to
guarantee the preallocation is persistent on disk until a
fdatasync, fsync, sync operation occurs. If the file is opened
O_SYNC or O_DATASYNC, only then should the transaction be issued
synchronously.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
The release method for mds connections uses a backpointer to the
mds_client, so we need to flush the workqueue of any pending work (and
ceph_connection references) prior to freeing the mds_client. This fixes
an oops easily triggered under UML by
while true ; do mount ... ; umount ... ; done
Also fix an outdated comment: the flush in ceph_destroy_client only flushes
OSD connections out. This bug is basically an artifact of the ceph ->
ceph+libceph conversion.
Signed-off-by: Sage Weil <sage@newdream.net>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (43 commits)
ext4: fix a BUG in mb_mark_used during trim.
ext4: unused variables cleanup in fs/ext4/extents.c
ext4: remove redundant set_buffer_mapped() in ext4_da_get_block_prep()
ext4: add more tracepoints and use dev_t in the trace buffer
ext4: don't kfree uninitialized s_group_info members
ext4: add missing space in printk's in __ext4_grp_locked_error()
ext4: add FITRIM to compat_ioctl.
ext4: handle errors in ext4_clear_blocks()
ext4: unify the ext4_handle_release_buffer() api
ext4: handle errors in ext4_rename
jbd2: add COW fields to struct jbd2_journal_handle
jbd2: add the b_cow_tid field to journal_head struct
ext4: Initialize fsync transaction ids in ext4_new_inode()
ext4: Use single thread to perform DIO unwritten convertion
ext4: optimize ext4_bio_write_page() when no extent conversion is needed
ext4: skip orphan cleanup if fs has unknown ROCOMPAT features
ext4: use the nblocks arg to ext4_truncate_restart_trans()
ext4: fix missing iput of root inode for some mount error paths
ext4: make FIEMAP and delayed allocation play well together
ext4: suppress verbose debugging information if malloc-debug is off
...
Fi up conflicts in fs/ext4/super.c due to workqueue changes
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6: (9356 commits)
[media] rc: update for bitop name changes
fs: simplify iget & friends
fs: pull inode->i_lock up out of writeback_single_inode
fs: rename inode_lock to inode_hash_lock
fs: move i_wb_list out from under inode_lock
fs: move i_sb_list out from under inode_lock
fs: remove inode_lock from iput_final and prune_icache
fs: Lock the inode LRU list separately
fs: factor inode disposal
fs: protect inode->i_state with inode->i_lock
lib, arch: add filter argument to show_mem and fix private implementations
SLUB: Write to per cpu data when allocating it
slub: Fix debugobjects with lockless fastpath
autofs4: Do not potentially dereference NULL pointer returned by fget() in autofs_dev_ioctl_setpipefd()
autofs4 - remove autofs4_lock
autofs4 - fix d_manage() return on rcu-walk
autofs4 - fix autofs4_expire_indirect() traversal
autofs4 - fix dentry leak in autofs4_expire_direct()
autofs4 - reinstate last used update on access
vfs - check non-mountpoint dentry might block in __follow_mount_rcu()
...
NOTE!
This merge commit was created to fix compilation error. The block
tree was merged upstream and removed the 'elv_queue_empty()'
function which the new 'mtdswap' driver is using. So a simple
merge of the mtd tree with upstream does not compile. And the
mtd tree has already be published, so re-basing it is not an option.
To fix this unfortunate situation, I had to merge upstream into the
mtd-2.6.git tree without committing, put the fixup patch on top of
this, and then commit this. The result is that we do not have commits
which do not compile.
In other words, this merge commit "merges" 3 things: the MTD tree, the
upstream tree, and the fixup patch.
This was noticed by users who performed more than 2^32 lock operations
and hence made this counter overflow (eventually leading to
use-after-free's). Setting rq_client to NULL here means that it won't
later get auth_domain_put() when it should be.
Appears to have been introduced in 2.5.42 by "[PATCH] kNFSd: Move auth
domain lookup into svcauth" which moved most of the rq_client handling
to common svcauth code, but left behind this one line.
Cc: Neil Brown <neilb@suse.de>
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
fs: simplify iget & friends
fs: pull inode->i_lock up out of writeback_single_inode
fs: rename inode_lock to inode_hash_lock
fs: move i_wb_list out from under inode_lock
fs: move i_sb_list out from under inode_lock
fs: remove inode_lock from iput_final and prune_icache
fs: Lock the inode LRU list separately
fs: factor inode disposal
fs: protect inode->i_state with inode->i_lock
autofs4: Do not potentially dereference NULL pointer returned by fget() in autofs_dev_ioctl_setpipefd()
autofs4 - remove autofs4_lock
autofs4 - fix d_manage() return on rcu-walk
autofs4 - fix autofs4_expire_indirect() traversal
autofs4 - fix dentry leak in autofs4_expire_direct()
autofs4 - reinstate last used update on access
vfs - check non-mountpoint dentry might block in __follow_mount_rcu()
Merge get_new_inode/get_new_inode_fast into iget5_locked/iget_locked
as those were the only callers. Remove the internal ifind/ifind_fast
helpers - ifind_fast only had a single caller, and ifind had two
callers wanting it to do different things. Also clean up the comments
in this area to focus on information important to a developer trying
to use it, instead of overloading them with implementation details.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
First thing we do in writeback_single_inode() is take the i_lock and
the last thing we do is drop it. A caller already holds the i_lock,
so pull the i_lock out of writeback_single_inode() to reduce the
round trips on this lock during inode writeback.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
All that remains of the inode_lock is protecting the inode hash list
manipulation and traversals. Rename the inode_lock to
inode_hash_lock to reflect it's actual function.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Protect the inode writeback list with a new global lock
inode_wb_list_lock and use it to protect the list manipulations and
traversals. This lock replaces the inode_lock as the inodes on the
list can be validity checked while holding the inode->i_lock and
hence the inode_lock is no longer needed to protect the list.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Protect the per-sb inode list with a new global lock
inode_sb_list_lock and use it to protect the list manipulations and
traversals. This lock replaces the inode_lock as the inodes on the
list can be validity checked while holding the inode->i_lock and
hence the inode_lock is no longer needed to protect the list.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Now that inode state changes are protected by the inode->i_lock and
the inode LRU manipulations by the inode_lru_lock, we can remove the
inode_lock from prune_icache and the initial part of iput_final().
instead of using the inode_lock to protect the inode during
iput_final, use the inode->i_lock instead. This protects the inode
against new references being taken while we change the inode state
to I_FREEING, as well as preventing prune_icache from grabbing the
inode while we are manipulating it. Hence we no longer need the
inode_lock in iput_final prior to setting I_FREEING on the inode.
For prune_icache, we no longer need the inode_lock to protect the
LRU list, and the inodes themselves are protected against freeing
races by the inode->i_lock. Hence we can lift the inode_lock from
prune_icache as well.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Introduce the inode_lru_lock to protect the inode_lru list. This
lock is nested inside the inode->i_lock to allow the inode to be
added to the LRU list in iput_final without needing to deal with
lock inversions. This keeps iput_final() clean and neat.
Further, where marking the inode I_FREEING and removing it from the
LRU, move the LRU list manipulation within the inode->i_lock to keep
the list manipulation consistent with iput_final. This also means
that most of the open coded LRU list removal + unused inode
accounting can now use the inode_lru_list_del() wrappers which
cleans the code up further.
However, this locking change means what the LRU traversal in
prune_icache() inverts this lock ordering and needs to use trylock
semantics on the inode->i_lock to avoid deadlocking. In these cases,
if we fail to lock the inode we move it to the back of the LRU to
prevent spinning on it.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We have a couple of places that dispose of inodes. factor the
disposal into evict() to isolate this code and make it simpler to
peel away the inode_lock from the code.
While doing this, change the logic flow in iput_final() to separate
the different cases that need to be handled to make the transitions
the inode goes through more obvious.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Protect inode state transitions and validity checks with the
inode->i_lock. This enables us to make inode state transitions
independently of the inode_lock and is the first step to peeling
away the inode_lock from the code.
This requires that __iget() is done atomically with i_state checks
during list traversals so that we don't race with another thread
marking the inode I_FREEING between the state check and grabbing the
reference.
Also remove the unlock_new_inode() memory barrier optimisation
required to avoid taking the inode_lock when clearing I_NEW.
Simplify the code by simply taking the inode->i_lock around the
state change and wakeup. Because the wakeup is no longer tricky,
remove the wake_up_inode() function and open code the wakeup where
necessary.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
changes LAYOUTGET and GETDEVICEINFO XDR parsing to:
- not use vmap, which doesn't work on incoherent archs
- use xdr_stream parsing for all xdr
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Test NFS_INO_LAYOUTCOMMIT before kzalloc
Mark inode dirty to retry LAYOUTCOMMIT on kzalloc failure.
Add comments.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In fs/autofs4/dev-ioctl.c::autofs_dev_ioctl_setpipefd() we call fget(),
which may return NULL, but we do not explicitly test for that NULL return
so we may end up dereferencing a NULL pointer - bad.
When I originally submitted this patch I had chosen EBUSY as the return
value to use if this happens. Ian Kent was kind enough to explain why that
would most likely be wrong and why EBADF should most likely be used
instead. This version of the patch uses EBADF.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The autofs4_lock introduced by the rcu-walk changes has unnecessarily
broad scope. The locking is better handled by the per-autofs super
block lookup_lock.
Signed-off-by: Ian Kent <raven@themaw.net>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The daemon never needs to block and, in the rcu-walk case an error
return isn't used, so always return zero.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The vfs-scale changes changed the traversal used in
autofs4_expire_indirect() from a list to a depth first tree traversal
which isn't right.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
There is a missing dput() when returning from autofs4_expire_direct()
when we see that the dentry is already a pending mount.
Signed-off-by: Ian Kent <raven@themaw.net>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When direct (and offset) mounts were introduced the the last used
timeout could no longer be updated in ->d_revalidate(). This is
because covered direct mounts would be followed over without calling
the autofs file system. As a result the definition of the busyness
check for all entries was changed to be "actually busy" being an open
file or working directory within the automount. But now we have a call
back in the follow so the last used update on any access can be
re-instated. This requires DCACHE_MANAGE_TRANSIT to always be set.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When following a mount in rcu-walk mode we must check if the incoming dentry
is telling us it may need to block, even if it isn't actually a mountpoint.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When sec=<something> is not presented as a mount option,
we should attempt to determine what security flavor the
server is using.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
A submount may use different security than the parent
mount does. We should figure out what sec flavor the
submount uses at mount time.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
A later patch will need to perform a lookup using an
alternate client with a different security flavor.
This patch adds support for doing that on NFS v4.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch changes nfs4_call_sync() from a macro into a
static inline function. As a macro, the call_sync()
function will not do any type checking and depends
on the sequence arguments always having the same name.
As a function, we get to have type checking and can
rename the arguments if we so choose.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block: (65 commits)
Documentation/iostats.txt: bit-size reference etc.
cfq-iosched: removing unnecessary think time checking
cfq-iosched: Don't clear queue stats when preempt.
blk-throttle: Reset group slice when limits are changed
blk-cgroup: Only give unaccounted_time under debug
cfq-iosched: Don't set active queue in preempt
block: fix non-atomic access to genhd inflight structures
block: attempt to merge with existing requests on plug flush
block: NULL dereference on error path in __blkdev_get()
cfq-iosched: Don't update group weights when on service tree
fs: assign sb->s_bdi to default_backing_dev_info if the bdi is going away
block: Require subsystems to explicitly allocate bio_set integrity mempool
jbd2: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
jbd: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
fs: make fsync_buffers_list() plug
mm: make generic_writepages() use plugging
blk-cgroup: Add unaccounted time to timeslice_used.
block: fixup plugging stubs for !CONFIG_BLOCK
block: remove obsolete comments for blkdev_issue_zeroout.
blktrace: Use rq->cmd_flags directly in blk_add_trace_rq.
...
Fix up conflicts in fs/{aio.c,super.c}
* 'for-2.6.39' of git://linux-nfs.org/~bfields/linux:
SUNRPC: Remove resource leak in svc_rdma_send_error()
nfsd: wrong index used in inner loop
nfsd4: fix comment and remove unused nfsd4_file fields
nfs41: make sure nfs server return right ca_maxresponsesize_cached
nfsd: fix compile error
svcrpc: fix bad argument in unix_domain_find
nfsd4: fix struct file leak
nfsd4: minor nfs4state.c reshuffling
svcrpc: fix rare race on unix_domain creation
nfsd41: modify the members value of nfsd4_op_flags
nfsd: add proc file listing kernel's gss_krb5 enctypes
gss:krb5 only include enctype numbers in gm_upcall_enctypes
NFSD, VFS: Remove dead code in nfsd_rename()
nfsd: kill unused macro definition
locks: use assign_type()
* git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus:
Squashfs: Use vmalloc rather than kmalloc for zlib workspace
Squashfs: handle corruption of directory structure
Squashfs: wrap squashfs_mount() definition
Squashfs: xz_wrapper doesn't need to include squashfs_fs_i.h anymore
Squashfs: Update documentation to include compression options
Squashfs: Update Kconfig help text to include xz compression
Squashfs: add compression options support to xz decompressor
Squashfs: extend decompressor framework to handle compression options
* 'for-linus' of git://git.open-osd.org/linux-open-osd:
exofs: deprecate the commands pending counter
exofs: Write sbi->s_nextid as part of the Create command
exofs: Add option to mount by osdname
exofs: Override read-ahead to align on stripe_size
exofs: simple fsync race fix
exofs: Optimize read_4_write
exofs: Trivial: fix some indentation and debug prints
exofs: Remove redundant unlikely()
This patch fixes the following UBIFS assertion warning:
UBIFS assert failed in do_readpage at 115 (pid 199)
[<b00321b8>] (unwind_backtrace+0x0/0xdc) from [<af025118>]
(do_readpage+0x108/0x594 [ubifs])
[<af025118>] (do_readpage+0x108/0x594 [ubifs]) from [<af025764>]
(ubifs_write_end+0x1c0/0x2e8 [ubifs])
[<af025764>] (ubifs_write_end+0x1c0/0x2e8 [ubifs]) from
[<b00a0164>] (generic_file_buffered_write+0x18c/0x270)
[<b00a0164>] (generic_file_buffered_write+0x18c/0x270) from
[<b00a08d4>] (__generic_file_aio_write+0x478/0x4c0)
[<b00a08d4>] (__generic_file_aio_write+0x478/0x4c0) from
[<b00a0984>] (generic_file_aio_write+0x68/0xc8)
[<b00a0984>] (generic_file_aio_write+0x68/0xc8) from
[<af024a78>] (ubifs_aio_write+0x178/0x1d8 [ubifs])
[<af024a78>] (ubifs_aio_write+0x178/0x1d8 [ubifs]) from
[<b00d104c>] (do_sync_write+0xb0/0x100)
[<b00d104c>] (do_sync_write+0xb0/0x100) from [<b00d1abc>]
(vfs_write+0xac/0x154)
[<b00d1abc>] (vfs_write+0xac/0x154) from [<b00d1c10>]
(sys_write+0x3c/0x68)
[<b00d1c10>] (sys_write+0x3c/0x68) from [<b002d9a0>]
(ret_fast_syscall+0x0/0x2c)
The 'PG_checked' flag is used to indicate that the page does not
supposedly exist on the media (e.g., a hole or a page beyond the
inode size), so it requires slightly bigger budget, because we have
to account the indexing size increase. And this flag basically
tells that the budget for this page has to be "new page budget".
The "new page budget" is slightly bigger than the "existing page
budget".
The 'do_readpage()' function has the following assertion which
sometimes is hit: 'ubifs_assert(!PageChecked(page))'. Obviously,
the meaning of this assertion is: "I should not be asked to read
a page which does not exist on the media".
However, in 'ubifs_write_begin()' we have a small "trick". Notice,
that VFS may write pages which were not read yet, so the page data
were not loaded from the media to the page cache yet. If VFS tells
that it is going to change only some part of the page, we obviously
have to load it from the media. However, if VFS tells that it is
going to change whole page, we do not read it from the media for
optimization purposes.
However, since we do not read it, we do not know if it exists on
the media or not (a hole, etc). So we set the 'PG_checked' flag
to this page to force bigger budget, just in case.
So 'ubifs_write_begin()' sets 'PG_checked'. Then we are in
'ubifs_write_end()'. And VFS tells us: "hey, for some reasons I
changed my mind and did not change whole page". Frankly, I do not
know why this happens, but I hit this somehow on an ARM platform.
And this is extremely rare.
So in this case UBIFS does the following:
1. Cancels allocated budget.
2. Loads the page from the media by calling 'do_readpage()'.
3. Asks VFS to repeat the whole write operation from the very
beginning (call '->write_begin() again, etc).
And the assertion warning is hit at the step 2 - remember we have
the 'PG_checked' set for this page, and 'do_readpage()' does not
like this. So this patch fixes the problem by adding step 1.5 and
cleaning the 'PG_checked' before calling 'do_readpage()'.
All in all, this patch does not fix any functionality issue, but it
silences UBIFS false positive warning which may happen in very very
rare cases.
And while on it, this patch also improves a commentary which explains
the reasons of setting the 'PG_checked' flag for the page. The old
commentary was a bit difficult to understand.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Simplify UBIFS configuration menu and kill the option to enable self-check
compile-time. We do not really need this because we can do this run-time
using the module parameters or the corresponding sysfs interfaces. And
there is a value in simplifying the kernel configuration menu which becomes
increasingly large.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
This patch fixes a brown-paperbag bug which was introduced by me:
I used incorrect "GFP_KERNEL | GFP_NOFS" allocation flags to make
sure my allocations do not cause write-back. But the correct form
is "GFP_NOFS".
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Original computation forgets to count writes of indirect block themselves
(it only counts with blocks necessary for their allocation) in ordered mode.
Acked-by: Amir Goldstein <amir73il@users.sf.net>
Signed-off-by:Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
deal with races in /proc/*/{syscall,stack,personality}
proc: enable writing to /proc/pid/mem
proc: make check_mem_permission() return an mm_struct on success
proc: hold cred_guard_mutex in check_mem_permission()
proc: disable mem_write after exec
mm: implement access_remote_vm
mm: factor out main logic of access_process_vm
mm: use mm_struct to resolve gate vma's in __get_user_pages
mm: arch: rename in_gate_area_no_task to in_gate_area_no_mm
mm: arch: make in_gate_area take an mm_struct instead of a task_struct
mm: arch: make get_gate_vma take an mm_struct instead of a task_struct
x86: mark associated mm when running a task in 32 bit compatibility mode
x86: add context tag to mark mm when running a task in 32-bit compatibility mode
auxv: require the target to be tracable (or yourself)
close race in /proc/*/environ
report errors in /proc/*/*map* sanely
pagemap: close races with suid execve
make sessionid permissions in /proc/*/task/* match those in /proc/*
fix leaks in path_lookupat()
Fix up trivial conflicts in fs/proc/base.c
And give it a kernel-doc comment.
[akpm@linux-foundation.org: btrfs changed in linux-next]
Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Daniel Lezcano <daniel.lezcano@free.fr>
Acked-by: David Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cheat for now and say all files belong to init_user_ns. Next step will be
to let superblocks belong to a user_ns, and derive inode_userns(inode)
from inode->i_sb->s_user_ns. Finally we'll introduce more flexible
arrangements.
Changelog:
Feb 15: make is_owner_or_cap take const struct inode
Feb 23: make is_owner_or_cap bool
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Daniel Lezcano <daniel.lezcano@free.fr>
Acked-by: David Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After the previous cleanup in proc_get_sb() the global proc_mnt has no
reasons to exists, kill it.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@free.fr>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Serge E. Hallyn <serge@hallyn.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reorganize proc_get_sb() so it can be called before the struct pid of the
first process is allocated.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@free.fr>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Serge E. Hallyn <serge@hallyn.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While mm->start_stack was protected from cross-uid viewing (commit
f83ce3e6b0 ("proc: avoid information leaks to non-privileged
processes")), the start_code and end_code values were not. This would
allow the text location of a PIE binary to leak, defeating ASLR.
Note that the value "1" is used instead of "0" for a protected value since
"ps", "killall", and likely other readers of /proc/pid/stat, take
start_code of "0" to mean a kernel thread and will misbehave. Thanks to
Brad Spengler for pointing this out.
Addresses CVE-2011-0726
Signed-off-by: Kees Cook <kees.cook@canonical.com>
Cc: <stable@kernel.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Eugene Teo <eugeneteo@kernel.sg>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Brad Spengler <spender@grsecurity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1. namelen is declared "unsigned short" which hints for "maybe space savings".
Indeed in 2.4 struct proc_dir_entry looked like:
struct proc_dir_entry {
unsigned short low_ino;
unsigned short namelen;
Now, low_ino is "unsigned int", all savings were gone for a long time.
"struct proc_dir_entry" is not that countless to worry about it's size,
anyway.
2. converting from unsigned short to int/unsigned int can only create
problems, we better play it safe.
Space is not really conserved, because of natural alignment for the next
field. sizeof(struct proc_dir_entry) remains the same.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The current code fails to print the "[heap]" marking if the heap is split
into multiple mappings.
Fix the check so that the marking is displayed in all possible cases:
1. vma matches exactly the heap
2. the heap vma is merged e.g. with bss
3. the heap vma is splitted e.g. due to locked pages
Test cases. In all cases, the process should have mapping(s) with
[heap] marking:
(1) vma matches exactly the heap
#include <stdio.h>
#include <unistd.h>
#include <sys/types.h>
int main (void)
{
if (sbrk(4096) != (void *)-1) {
printf("check /proc/%d/maps\n", (int)getpid());
while (1)
sleep(1);
}
return 0;
}
# ./test1
check /proc/553/maps
[1] + Stopped ./test1
# cat /proc/553/maps | head -4
00008000-00009000 r-xp 00000000 01:00 3113640 /test1
00010000-00011000 rw-p 00000000 01:00 3113640 /test1
00011000-00012000 rw-p 00000000 00:00 0 [heap]
4006f000-40070000 rw-p 00000000 00:00 0
(2) the heap vma is merged
#include <stdio.h>
#include <unistd.h>
#include <sys/types.h>
char foo[4096] = "foo";
char bar[4096];
int main (void)
{
if (sbrk(4096) != (void *)-1) {
printf("check /proc/%d/maps\n", (int)getpid());
while (1)
sleep(1);
}
return 0;
}
# ./test2
check /proc/556/maps
[2] + Stopped ./test2
# cat /proc/556/maps | head -4
00008000-00009000 r-xp 00000000 01:00 3116312 /test2
00010000-00012000 rw-p 00000000 01:00 3116312 /test2
00012000-00014000 rw-p 00000000 00:00 0 [heap]
4004a000-4004b000 rw-p 00000000 00:00 0
(3) the heap vma is splitted (this fails without the patch)
#include <stdio.h>
#include <unistd.h>
#include <sys/mman.h>
#include <sys/types.h>
int main (void)
{
if ((sbrk(4096) != (void *)-1) && !mlockall(MCL_FUTURE) &&
(sbrk(4096) != (void *)-1)) {
printf("check /proc/%d/maps\n", (int)getpid());
while (1)
sleep(1);
}
return 0;
}
# ./test3
check /proc/559/maps
[1] + Stopped ./test3
# cat /proc/559/maps|head -4
00008000-00009000 r-xp 00000000 01:00 3119108 /test3
00010000-00011000 rw-p 00000000 01:00 3119108 /test3
00011000-00012000 rw-p 00000000 00:00 0 [heap]
00012000-00013000 rw-p 00000000 00:00 0 [heap]
It looks like the bug has been there forever, and since it only results in
some information missing from a procfile, it does not fulfil the -stable
"critical issue" criteria.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This file is readable for the task owner. Hide kernel addresses from
unprivileged users, leave them function names and offsets.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: Kees Cook <kees.cook@canonical.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
minix bit operations are only used by minix filesystem and useless by
other modules. Because byte order of inode and block bitmaps is different
on each architecture like below:
m68k:
big-endian 16bit indexed bitmaps
h8300, microblaze, s390, sparc, m68knommu:
big-endian 32 or 64bit indexed bitmaps
m32r, mips, sh, xtensa:
big-endian 32 or 64bit indexed bitmaps for big-endian mode
little-endian bitmaps for little-endian mode
Others:
little-endian bitmaps
In order to move minix bit operations from asm/bitops.h to architecture
independent code in minix filesystem, this provides two config options.
CONFIG_MINIX_FS_BIG_ENDIAN_16BIT_INDEXED is only selected by m68k.
CONFIG_MINIX_FS_NATIVE_ENDIAN is selected by the architectures which use
native byte order bitmaps (h8300, microblaze, s390, sparc, m68knommu,
m32r, mips, sh, xtensa). The architectures which always use little-endian
bitmaps do not select these options.
Finally, we can remove minix bit operations from asm/bitops.h for all
architectures.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Michal Simek <monstr@monstr.eu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As the result of conversions, there are no users of ext2 non-atomic bit
operations except for ext2 filesystem itself. Now we can put them into
architecture independent code in ext2 filesystem, and remove from
asm/bitops.h for all architectures.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As a preparation for removing ext2 non-atomic bit operations from
asm/bitops.h. This converts ext2 non-atomic bit operations to
little-endian bit operations.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As a preparation for removing ext2 non-atomic bit operations from
asm/bitops.h. This converts ext2 non-atomic bit operations to
little-endian bit operations.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As a preparation for removing ext2 non-atomic bit operations from
asm/bitops.h. This converts ext2 non-atomic bit operations to
little-endian bit operations.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As a preparation for removing ext2 non-atomic bit operations from
asm/bitops.h. This converts ext2 non-atomic bit operations to
little-endian bit operations.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Joel Becker <joel.becker@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As a preparation for removing ext2 non-atomic bit operations from
asm/bitops.h. This converts ext2 non-atomic bit operations to
little-endian bit operations.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
fs/adfs/adfs.h: In function 'append_filetype_suffix':
fs/adfs/adfs.h:115: warning: comparison is always false due to limited range of data type
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Stuart Swales <stuart.swales.croftnuisk@gmail.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All of those are rw-r--r-- and all are broken for suid - if you open
a file before the target does suid-root exec, you'll be still able
to access it. For personality it's not a big deal, but for syscall
and stack it's a real problem.
Fix: check that task is tracable for you at the time of read().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
With recent changes there is no longer a security hazard with writing to
/proc/pid/mem. Remove the #ifdef.
Signed-off-by: Stephen Wilson <wilsons@start.ca>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This change allows us to take advantage of access_remote_vm(), which in turn
eliminates a security issue with the mem_write() implementation.
The previous implementation of mem_write() was insecure since the target task
could exec a setuid-root binary between the permission check and the actual
write. Holding a reference to the target mm_struct eliminates this
vulnerability.
Signed-off-by: Stephen Wilson <wilsons@start.ca>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Avoid a potential race when task exec's and we get a new ->mm but check against
the old credentials in ptrace_may_access().
Holding of the mutex is implemented by factoring out the body of the code into a
helper function __check_mem_permission(). Performing this factorization now
simplifies upcoming changes and minimizes churn in the diff's.
Signed-off-by: Stephen Wilson <wilsons@start.ca>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This change makes mem_write() observe the same constraints as mem_read(). This
is particularly important for mem_write as an accidental leak of the fd across
an exec could result in arbitrary modification of the target process' memory.
IOW, /proc/pid/mem is implicitly close-on-exec.
Signed-off-by: Stephen Wilson <wilsons@start.ca>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Morally, the presence of a gate vma is more an attribute of a particular mm than
a particular task. Moreover, dropping the dependency on task_struct will help
make both existing and future operations on mm's more flexible and convenient.
Signed-off-by: Stephen Wilson <wilsons@start.ca>
Reviewed-by: Michel Lespinasse <walken@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Now that all the infrastructure is in place, we will do the
right thing if we remove this special casing.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The filelayout driver sends LAYOUTCOMMIT only when COMMIT goes to
the data server (as opposed to the MDS) and the data server WRITE
is not NFS_FILE_SYNC.
Only whole file layout support means that there is only one IOMODE_RW layout
segment.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Alexandros Batsakis <batsakis@netapp.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Mingyang Guo <guomingyang@nrchpc.ac.cn>
Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: Zhang Jingwang <zhangjingwang@nrchpc.ac.cn>
Tested-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Implement all the hooks created in the previous patches.
This requires exporting quite a few functions and adding a few
structure fields.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Any COMMIT compound directed to a data server needs to have the
GETATTR calls suppressed. We here, make sure the field we are testing
(data->lseg) is set and refcounted correctly.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We create three major hooks for the pnfs code.
pnfs_mark_request_commit() is called during writeback_done from
nfs_mark_request_commit, which gives the driver an opportunity to
claim it wants control over commiting a particular req.
pnfs_choose_commit_list() is called from nfs_scan_list
to choose which list a given req should be added to, based on
where we intend to send it for COMMIT. It is up to the driver
to have preallocated list headers for each destination it may need.
pnfs_commit_list() is how the driver actually takes control, it is
used instead of nfs_commit_list().
In order to pass information between the above functions, we create
a union in nfs_page to hold a lseg (which is possible because the req is
not on any list while in transition), and add some flags to indicate
if we need to use the pnfs code.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Create a preallocated list header to hold nfs_pages for each
non-MDS COMMIT destination. Note this is not necessarily each DS,
but is basically each <DS, fh> pair.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Move it up to avoid forward declaration in later patch.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Create a separate support function for later use by data server
commit code.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Create a separate support function for later use by data server
commit code.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Add a callback that the pnfs layout driver can use to do its own
error handling of the data server's COMMIT response.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Based on consensus reached in Feb 2011 interim IETF meeting regarding
use of LAYOUTCOMMIT, it has been decided that a NFS_DATA_SYNC return
from a WRITE to data server should not initiate a COMMIT.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Some filesystems (such as ext4) can return the same cookie value for
multiple files. If we try to start a readdir with one of these cookies,
the server will return the first file found with a cookie of the same
value. This can cause the client to enter an infinite loop.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
nfs_opendir() created a context that held much more information than we
need for a readdir. This patch introduces a slimmed-down
nfs_open_dir_context that contains only the cookie and the cred used for
RPC operations. The new context will eventually be used to help detect
readdir loops.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If we're doing a search by readdir cookie, we need to ensure that the
resulting f_pos is updated. To do so, we need to update the
desc->current_index, in the same way that we do in the search by
file offset case.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The map_bh() call will have already set the buffer_head to mapped.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Instead of always creating a huge (268K) deflate_workspace with the
maximum compression parameters (windowBits=15, memLevel=8), allow the
caller to obtain a smaller workspace by specifying smaller parameter
values.
For example, when capturing oops and panic reports to a medium with
limited capacity, such as NVRAM, compression may be the only way to
capture the whole report. In this case, a small workspace (24K works
fine) is a win, whether you allocate the workspace when you need it (i.e.,
during an oops or panic) or at boot time.
I've verified that this patch works with all accepted values of windowBits
(positive and negative), memLevel, and compression level.
Signed-off-by: Jim Keniston <jkenisto@us.ibm.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David Miller <davem@davemloft.net>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
d_alloc_name return NULL in case error, but we expect errno in
devpts_pty_new.
Addresses http://bugzilla.openvz.org/show_bug.cgi?id=1758
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The test program below will hang because io_getevents() uses
add_wait_queue_exclusive(), which means the wake_up() in io_destroy() only
wakes up one of the threads. Fix this by using wake_up_all() in the aio
code paths where we want to make sure no one gets stuck.
// t.c -- compile with gcc -lpthread -laio t.c
#include <libaio.h>
#include <pthread.h>
#include <stdio.h>
#include <unistd.h>
static const int nthr = 2;
void *getev(void *ctx)
{
struct io_event ev;
io_getevents(ctx, 1, 1, &ev, NULL);
printf("io_getevents returned\n");
return NULL;
}
int main(int argc, char *argv[])
{
io_context_t ctx = 0;
pthread_t thread[nthr];
int i;
io_setup(1024, &ctx);
for (i = 0; i < nthr; ++i)
pthread_create(&thread[i], NULL, getev, ctx);
sleep(1);
io_destroy(ctx);
for (i = 0; i < nthr; ++i)
pthread_join(thread[i], NULL);
return 0;
}
Signed-off-by: Roland Dreier <roland@purestorage.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ADFS (FileCore) storage complies with the RISC OS filetype specification
(12 bits of file type information is stored in the file load address,
rather than using a file extension). The existing driver largely ignores
this information and does not present it to the end user.
It is desirable that stored filetypes be made visible to the end user to
facilitate a precise copy of data and metadata from a hard disc (or image
thereof) into a RISC OS emulator (such as RPCEmu) or to a network share
which can be accessed by real Acorn systems.
This patch implements a per-mount filetype suffix option (use -o
ftsuffix=1) to present any filetype as a ,xyz hexadecimal suffix on each
file. This type suffix is compatible with that used by RISC OS systems
that access network servers using NFS client software and by RPCemu's host
filing system.
Signed-off-by: Stuart Swales <stuart.swales.croftnuisk@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ADFS (FileCore) storage complies with the RISC OS timestamp specification
(40-bit centiseconds since 01 Jan 1900 00:00:00). It is desirable that
stored timestamp precision be maintained to facilitate a precise copy of
data and metadata from a hard disc (or image thereof) into a RISC OS
emulator (such as RPCEmu).
This patch implements a full-precision conversion from ADFS to Unix
timestamp as the existing driver, for ease of calculation with old 32-bit
compilers, uses the common trick of shifting the 40-bits representing
centiseconds around into 32-bits representing seconds thereby losing
precision.
Signed-off-by: Stuart Swales<stuart.swales.croftnuisk@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kernel crashes in fs/adfs module when accessing directories with a large
number of objects on mounted Acorn ADFS E+/F+ format discs (or images) as
the existing code writes off the end of the fixed array of struct
buffer_head pointers.
Additionally, each directory access that didn't crash would leak a buffer
as nr_buffers was not adjusted correctly for E+/F+ discs (was always left
as one less than required).
The patch fixes this by allocating a dynamically-sized set of struct
buffer_head pointers if necessary for the E+/F+ case (many directories
still do in fact fit in 2048 bytes) and sets the correct nr_buffers so
that all buffers are released.
Addresses https://bugzilla.kernel.org/show_bug.cgi?id=26072
Tested by tar'ing the contents of my RISC PC's E+ format 20Gb HDD which
contains a number of large directories that previously crashed the kernel.
Signed-off-by: Stuart Swales <stuart.swales.croftnuisk@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When CONFIG_SYSCTL=n, we get the following warning:
fs/coda/sysctl.c:18: warning: `coda_tabl' defined but not used
Fix the warning by making sure coda_table and it's callee function are in
the same context. Also clean up the code by removing extra #ifdef.
[akpm@linux-foundation.org: remove unneeded stub macros]
Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Cc: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With GCC-4.6 we get warnings about things being 'set but not used'.
In load_elf_binary() this can happen with reloc_func_desc if ELF_PLAT_INIT
is defined, but doesn't use the reloc_func_desc argument.
Quiet the warning/error by marking reloc_func_desc as __maybe_unused.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a comment to ep_poll(), rename labels a bit clearly, fix a warning of
unused variable from gcc and optimize the non-blocking path a little.
Hinted-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
hannes@cmpxchg.org:
: The non-blocking ep_poll path optimization introduced skipping over the
: return value setup.
:
: Initialize it properly, my userspace gets upset by epoll_wait() returning
: random things.
:
: In addition, remove the reinitialization at the fetch_events label, the
: return value is garuanteed to be zero when execution reaches there.
[hannes@cmpxchg.org: fix initialization]
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shawn Bohrer <shawn.bohrer@gmail.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move the event readiness check into a proper inline, and use it uniformly
inside ep_poll() code. Events in the ->ovflist are no less ready than the
ones in ->rdllist.
Signed-off-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Shawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
printk()s without a priority level default to KERN_WARNING. To reduce
noise at KERN_WARNING, this patch set the priority level appriopriately
for unleveled printks()s. This should be useful to folks that look at
dmesg warnings closely.
Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that the mere act of _looking_ at /proc/$pid/smaps will not destroy
transparent huge pages, tell how much of the VMA is actually mapped with
them.
This way, we can make sure that we're getting THPs where we
expect to see them.
Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Eric B Munson <emunson@mgebm.net>
Tested-by: Eric B Munson <emunson@mgebm.net>
Cc: Michael J Wolf <mjwolf@us.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds code to explicitly detect and handle pmd_trans_huge() pmds. It
then passes HPAGE_SIZE units in to the smap_pte_entry() function instead
of PAGE_SIZE.
This means that using /proc/$pid/smaps now will no longer cause THPs to be
broken down in to small pages.
Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Reviewed-by: Eric B Munson <emunson@mgebm.net>
Tested-by: Eric B Munson <emunson@mgebm.net>
Acked-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Michael J Wolf <mjwolf@us.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add an argument to the new smaps_pte_entry() function to let it account in
things other than PAGE_SIZE units. I changed all of the PAGE_SIZE sites,
even though not all of them can be reached for transparent huge pages,
just so this will continue to work without changes as THPs are improved.
Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Eric B Munson <emunson@mgebm.net>
Tested-by: Eric B Munson <emunson@mgebm.net>
Cc: Michael J Wolf <mjwolf@us.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We will use smaps_pte_entry() in a moment to handle both small and
transparent large pages. But, we must break it out of smaps_pte_range()
first.
Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Eric B Munson <emunson@mgebm.net>
Tested-by: Eric B Munson <emunson@mgebm.net>
Cc: Michael J Wolf <mjwolf@us.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Right now, if a mm_walk has either ->pte_entry or ->pmd_entry set, it will
unconditionally split any transparent huge pages it runs in to. In
practice, that means that anyone doing a
cat /proc/$pid/smaps
will unconditionally break down every huge page in the process and depend
on khugepaged to re-collapse it later. This is fairly suboptimal.
This patch changes that behavior. It teaches each ->pmd_entry handler
(there are five) that they must break down the THPs themselves. Also, the
_generic_ code will never break down a THP unless a ->pte_entry handler is
actually set.
This means that the ->pmd_entry handlers can now choose to deal with THPs
without breaking them down.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Eric B Munson <emunson@mgebm.net>
Tested-by: Eric B Munson <emunson@mgebm.net>
Cc: Michael J Wolf <mjwolf@us.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch series changes remove_from_page_cache()'s page ref counting
rule. Page cache ref count is decreased in delete_from_page_cache(). So
we don't need to decrease the page reference in callers.
Signed-off-by: Minchan Kim <minchan.kim@gmail.com>
Cc: William Irwin <wli@holomorphy.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This function basically does:
remove_from_page_cache(old);
page_cache_release(old);
add_to_page_cache_locked(new);
Except it does this atomically, so there's no possibility for the "add" to
fail because of a race.
If memory cgroups are enabled, then the memory cgroup charge is also moved
from the old page to the new.
This function is currently used by fuse to move pages into the page cache
on read, instead of copying the page contents.
[minchan.kim@gmail.com: add freepage() hook to replace_page_cache_page()]
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove pointless memset() in nfsacl_encode().
Thanks to Trond Myklebust <Trond.Myklebust@netapp.com> for pointing out
that it is not needed since posix_acl_init() will set everything
regardless..
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
d_alloc_and_lookup() calls i_op->lookup method due to
rootfh changes his fsid.
During mount i_op of NFS root inode is set to
nfs_mountpoint_inode_operations, if rpc_ops->getroot()
and rpc_ops->getattr() return different fsid.
After that nfs_follow_remote_path() raised oops:
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [< (null)>] (null)
stack trace:
d_alloc_and_lookup+0x4c/0x74
do_lookup+0x1e3/0x280
link_path_walk+0x12e/0xab0
nfs4_remote_get_sb+0x56/0x2c0 [nfs]
path_walk+0x67/0xe0
vfs_path_lookup+0x8e/0x100
nfs_follow_remote_path+0x16f/0x3e0 [nfs]
nfs4_try_mount+0x6f/0xd0 [nfs]
nfs_get_sb+0x269/0x400 [nfs]
vfs_kern_mount+0x8a/0x1f0
do_kern_mount+0x52/0x130
do_mount+0x20a/0x260
sys_mount+0x90/0xe0
system_call_fastpath+0x16/0x1b
So just refresh fsid, as RFC3530 doesn't specify behavior
in case of rootfh changes fsid.
Signed-off-by: Vitaliy Gusev <gusev.vitaliy@nexenta.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
[net/9p]: Introduce basic flow-control for VirtIO transport.
9p: use the updated offset given by generic_write_checks
[net/9p] Don't re-pin pages on retrying virtqueue_add_buf().
[net/9p] Set the condition just before waking up.
[net/9p] unconditional wake_up to proc waiting for space on VirtIO ring
fs/9p: Add v9fs_dentry2v9ses
fs/9p: Attach writeback_fid on first open with WR flag
fs/9p: Open writeback fid in O_SYNC mode
fs/9p: Use truncate_setsize instead of vmtruncate
net/9p: Fix compile warning
net/9p: Convert the in the 9p rpc call path to GFP_NOFS
fs/9p: Fix race in initializing writeback fid
* git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
rbd: use watch/notify for changes in rbd header
libceph: add lingering request and watch/notify event framework
rbd: update email address in Documentation
ceph: rename dentry_release -> d_release, fix comment
ceph: add request to the tail of unsafe write list
ceph: remove request from unsafe list if it is canceled/timed out
ceph: move readahead default to fs/ceph from libceph
ceph: add ino32 mount option
ceph: update common header files
ceph: remove debugfs debug cruft
libceph: fix osd request queuing on osdmap updates
ceph: preserve I_COMPLETE across rename
libceph: Fix base64-decoding when input ends in newline.
pstore_dump() can be called with many different "reason" codes. Save
the name of the code in the persistent store record.
Also - only worthwhile calling pstore_mkfile for KMSG_DUMP_OOPS - that
is the only one where the kernel will continue running.
Reviewed-by: Seiji Aguchi <seiji.aguchi@hds.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Bugzilla bug 31422 reports occasional "page allocation failure. order:4"
at Squashfs mount time. Fix this by making zlib workspace allocation
use vmalloc rather than kmalloc.
Reported-by: Mehmet Giritli <mehmet@giritli.eu>
Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
Without this fix, even if a file is opened in O_APPEND mode, data will be
written at current file position instead of end of file.
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Add the new static inline and use the same
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
We don't need writeback fid if we are only doing O_RDONLY open
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Older version of protocol don't support tsyncfs operation.
So for them force a O_SYNC flag on the server
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
convert vmtruncate usage to truncate_setsize. We also writeback
all dirty pages before doing 9p operations and on success call truncate_setsize.
This ensure that we continue sanely on failed truncate on the server. The
disadvantage is that we are now going to write back the content that get
thrown away later as a part of truncate.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
When two process open the same file we can end up with both of them
allocating the writeback_fid. Add a new mutex which can be used
for synchronizing v9fs_inode member values.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
After the stack plugging introduction, these are called lockless.
Ensure that the counters are updated atomically.
Signed-off-by: Shaohua Li<shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
- Add more ext4 tracepoints.
- Change ext4 tracepoints to use dev_t field with MAJOR/MINOR macros
so that we can save 4 bytes in the ring buffer on some platforms.
- Add sync_mode to ext4_da_writepages, ext4_da_write_pages, and
ext4_da_writepages_result tracepoints. Also remove for_reclaim
field from ext4_da_writepages since it is usually not very useful.
Signed-off-by: Jiaying Zhang <jiayingz@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We can call kfree on uninitialized members of the s_group_info array
on an the error path. We can avoid this by kzalloc'ing the array.
This doesn't entirely solve the oops on mount if we fail down this
path; failed_mount4: frees the sbi, for one, which gets referenced
later in the failed mount paths - I haven't worked that out yet.
https://bugzilla.kernel.org/show_bug.cgi?id=30872
Reported-by: Eugene A. Shatokhin <dame_eugene@mail.ru>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When one of the two waits in nfs_commit_inode() is interrupted, it
returns a non-negative value, which causes nfs_wb_page() to think
that the operation was successful causing it to busy-loop rather
than exiting.
It also causes nfs_file_fsync() to incorrectly report the file as
being successfully committed to disk.
This patch fixes both problems by ensuring that we return an error
if the attempts to wait fail.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
If we're only doing a single write, and there are no other unstable
writes being queued up, we might want to just flip to using a stable
write RPC call.
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
When we do performence-testing on ext4 filesystem, we observed a
warning like this:
EXT4-fs error (device sda7): ext4_mb_generate_buddy:718: group 259825901 blocks in bitmap, 26057 in gd
instead, it should be
"group 2598, 25901 blocks in bitmap, 26057 in gd"
Reviewed-by: Coly Li <bosong.ly@taobao.com>
Cc: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Robin Dong <sanbai@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* 'for-linus' of git://oss.sgi.com/xfs/xfs: (23 commits)
xfs: don't name variables "panic"
xfs: factor agf counter updates into a helper
xfs: clean up the xfs_alloc_compute_aligned calling convention
xfs: kill support/debug.[ch]
xfs: Convert remaining cmn_err() callers to new API
xfs: convert the quota debug prints to new API
xfs: rename xfs_cmn_err_fsblock_zero()
xfs: convert xfs_fs_cmn_err to new error logging API
xfs: kill xfs_fs_mount_cmn_err() macro
xfs: kill xfs_fs_repair_cmn_err() macro
xfs: convert xfs_cmn_err to xfs_alert_tag
xfs: Convert xlog_warn to new logging interface
xfs: Convert linux-2.6/ files to new logging interface
xfs: introduce new logging API.
xfs: zero proper structure size for geometry calls
xfs: enable delaylog by default
xfs: more sensible inode refcounting for ialloc
xfs: stop using xfs_trans_iget in the RT allocator
xfs: check if device support discard in xfs_ioc_trim()
xfs: prevent leaking uninitialized stack memory in FSGEOMETRY_V1
...
/sys/fs is a somewhat strange way to tweak what could more
obviously be tuned with a mount option.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In sync_write_wait(), we assume that the newest request is at the
tail of unsafe write list. We should maintain the semantics here.
Signed-off-by: Henry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: Sage Weil <sage@newdream.net>
The ino32 mount option forces the ceph fs to report 32 bit
ino values. This is useful for 64 bit kernels with 32 bit userspace.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
lookup_mnt() is only used in the core fs routines now, so it doesn't need to
be globally declared anymore. It isn't exported to modules at the moment, so
nothing that can be modularised seems to be using it.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We have been creating bitmaps for small extents unconditionally forever. This
was great when testing to make sure the bitmap stuff was working, but is
overkill normally. So instead of always adding small chunks of free space to
bitmaps, only start doing it if we go past half of our extent threshold. This
will keeps us from creating a bitmap for just one small free extent at the front
of the block group, and will make the allocator a little faster as a result.
Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
We do all this fun stuff with min_bytes, but either don't use it in the case of
just normal extents, or use it completely wrong in the case of bitmaps. So fix
this for both cases
1) In the extent case, stop looking for space with window_free >= min_bytes
instead of bytes + empty_size.
2) In the bitmap case, we were looking for streches of free space that was at
least min_bytes in size, which was not right at all. So instead search for
stretches of free space that are at least bytes in size (this will make a
difference when we have > page size blocks) and then only search for min_bytes
amount of free space.
Thanks,
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Josef Bacik <josef@redhat.com>
The free space cluster stuff is heavy duty, so there is no sense in going
through the entire song and dance if there isn't enough space in the block group
to begin with. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Only bail out of fuse_dentry_revalidate() on LOOKUP_RCU when blocking
is actually necessary.
CC: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Only bail out of fuse_permission() on IPERM_FLAG_RCU when blocking is
actually necessary.
CC: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
If a fuse dev connection is broken, wake up any
processes that are blocking, in a poll system call,
on one of the files in the now defunct filesystem.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reduce the size of struct fuse_request by removing cuse_init_out from
the request structure and allocating it dinamically instead.
CC: Tejun Heo <tj@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
The usage of find_first_zero_bit() in bfs_create() is wrong for two
reasons.
The bitmap size argument to find_first_zero_bit() is info->si_lasti but
the correct bitmap size is info->si_lasti + 1 as info->si_lasti is the
last valid index in info->si_imap bitmap.
Another problem is that it is impossible to detect that info->si_imap
bitmap is full because there is an off-by-one bug in the return value
check for find_first_zero_bit(). If no zero bits exist in info->si_imap,
find_first_zero_bit() returns info->si_lasti. But the check can't catch
it due to the off-by-one.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: "Tigran A. Aivazian" <tigran@aivazian.fsnet.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In this case nobody can open a slave point, so will be better return
from devpts_pty_new()
Now we should not check error code from d_find_alias() in
devpts_pty_kill(), because the dentry exists all times.
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
These should be spin_unlock() instead of spin_lock(). It's a typo.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Move kfree() of i_private out of ->unlink() and into ->evict_inode()
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It is frequently useful to sync a single file system, instead of all
mounted file systems via sync(2):
- On machines with many mounts, it is not at all uncommon for some of
them to hang (e.g. unresponsive NFS server). sync(2) will get stuck on
those and may never get to the one you do care about (e.g., /).
- Some applications write lots of data to the file system and then
want to make sure it is flushed to disk. Calling fsync(2) on each
file introduces unnecessary ordering constraints that result in a large
amount of sub-optimal writeback/flush/commit behavior by the file
system.
There are currently two ways (that I know of) to sync a single super_block:
- BLKFLSBUF ioctl on the block device: That also invalidates the bdev
mapping, which isn't usually desirable, and doesn't work for non-block
file systems.
- 'mount -o remount,rw' will call sync_filesystem as an artifact of the
current implemention. Relying on this little-known side effect for
something like data safety sounds foolish.
Both of these approaches require root privileges, which some applications
do not have (nor should they need?) given that sync(2) is an unprivileged
operation.
This patch introduces a new system call syncfs(2) that takes an fd and
syncs only the file system it references. Maybe someday we can
$ sync /some/path
and not get
sync: ignoring all arguments
The syscall is motivated by comments by Al and Christoph at the last LSF.
syncfs(2) seems like an appropriate name given statfs(2).
A similar ioctl was also proposed a while back, see
http://marc.info/?l=linux-fsdevel&m=127970513829285&w=2
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Hi,
I was backporting the coredump over pipe feature and noticed this small typo,
I wish I would have something bigger to contribute...
>From 15d6080e0ed4267da103c706917a33b1015e8804 Mon Sep 17 00:00:00 2001
From: Holger Hans Peter Freyther <holger@moiji-mobile.com>
Date: Thu, 24 Feb 2011 17:42:50 +0100
Subject: [PATCH] fs: Fix a small typo in the comment
The function is called umh_pipe_setup not uhm_pipe_setup.
Signed-off-by: Holger Hans Peter Freyther <holger@moiji-mobile.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Remove the leftover from the commit 8ff3e8e85f ("select:
switch select() and poll() over to hrtimers").
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Move declaration of 'inode' to beginning of the function. Since it
is referenced directly or indirectly (in case of FIFREEZE/FITHAW/
FS_IOC_FIEMAP) it's not harmful IMHO. And remove unnecessary casts
using 'argp' instead.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
FITRIM isn't added in compat_ioctl. So a 32 bit program can't be executed
in a 64 bit platform. Add it in the compat_ioctl.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Checking return code from ext4_journal_get_write_access() is important
with snapshots, because this function invokes COW, so may return new
errors, such as ENOSPC.
ext4_clear_blocks() now returns < 0 for fatal errors, in which case,
ext4_free_data() is aborted.
Signed-off-by: Amir Goldstein <amir73il@users.sf.net>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
There are two wrapper functions which do exactly the same thing:
ext4_journal_release_buffer(), and ext4_handle_release_buffer(). In
addition, ext4_xattr_block_set() calls jbd2_journal_release_buffer()
directly.
Unify all of the code to use ext4_handle_release_buffer(), and get rid
of ext4_journal_release_buffer().
Signed-off-by: Amir Goldstein <amir73il@users.sf.net>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Checking return code from ext4_journal_get_write_access() is important
with snapshots, because this function invokes COW, so may return new
errors, such as ENOSPC.
We move the call to ext4_journal_get_write_access earlier in the
function, to simplify error handling in the case that this function
returns returns an error.
Signed-off-by: Amir Goldstein <amir73il@users.sf.net>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (25 commits)
video: change to new flag variable
scsi: change to new flag variable
rtc: change to new flag variable
rapidio: change to new flag variable
pps: change to new flag variable
net: change to new flag variable
misc: change to new flag variable
message: change to new flag variable
memstick: change to new flag variable
isdn: change to new flag variable
ieee802154: change to new flag variable
ide: change to new flag variable
hwmon: change to new flag variable
dma: change to new flag variable
char: change to new flag variable
fs: change to new flag variable
xtensa: change to new flag variable
um: change to new flag variables
s390: change to new flag variable
mips: change to new flag variable
...
Fix up trivial conflict in drivers/hwmon/Makefile
"disk" is always NULL when we goto out. There was a check for this
before, but it was removed in 69e02c59a7 "block: Don't check events
while open is in progress".
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@carl>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
nilfs2: move NILFS_SUPER_MAGIC to linux/magic.h
nilfs2: get rid of nilfs_sb_info structure
nilfs2: use sb instance instead of nilfs_sb_info struct
nilfs2: get rid of sc_sbi back pointer
nilfs2: move log writer onto nilfs object
nilfs2: move next generation counter into nilfs object
nilfs2: move s_inode_lock and s_dirty_files into nilfs object
nilfs2: move parameters on nilfs_sb_info into nilfs object
nilfs2: move mount options to nilfs object
nilfs2: record used amount of each checkpoint in checkpoint list
nilfs2: optimize rec_len functions
nilfs2: append blocksize info to warnings during loading super blocks
nilfs2: add compat ioctl
nilfs2: implement FS_IOC_GETFLAGS/SETFLAGS/GETVERSION
nilfs2: tighten restrictions on inode flags
nilfs2: mark S_NOATIME on inodes only if NOATIME attribute is set
nilfs2: use common file attribute macros
nilfs2: add free entries count only if clear bit operation succeeded
nilfs2: decrement inodes count only if raw inode was successfully deleted
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
dlm: use alloc_workqueue function
dlm: increase default hash table sizes
dlm: record full callback state
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
fs: call security_d_instantiate in d_obtain_alias V2
lose 'mounting_here' argument in ->d_manage()
don't pass 'mounting_here' flag to follow_down()
change the locking order for namespace_sem
fix deadlock in pivot_root()
vfs: split off vfsmount-related parts of vfs_kern_mount()
Some fixes for pstore
kill simple_set_mnt()
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bcopeland/omfs:
omfs: make readdir stop when filldir says so
omfs: merge unlink() and rmdir(), close leak in rename()
omfs: stop playing silly buggers with omfs_unlink() in ->rename()
omfs: rename() needs to mark old_inode dirty after ctime update
* 'linux-next' of git://git.infradead.org/ubifs-2.6: (25 commits)
UBIFS: clean-up commentaries
UBIFS: save 128KiB or more RAM
UBIFS: allocate orphans scan buffer on demand
UBIFS: allocate lpt dump buffer on demand
UBIFS: allocate ltab checking buffer on demand
UBIFS: allocate scanning buffer on demand
UBIFS: allocate dump buffer on demand
UBIFS: do not check data crc by default
UBIFS: simplify UBIFS Kconfig menu
UBIFS: print max. index node size
UBIFS: handle allocation failures in UBIFS write path
UBIFS: use max_write_size during recovery
UBIFS: use max_write_size for write-buffers
UBIFS: introduce write-buffer size field
UBI: incorporate LEB offset information
UBIFS: incorporate maximum write size
UBI: provide LEB offset information
UBI: incorporate maximum write size
UBIFS: fix LEB number in printk
UBIFS: restrict world-writable debugfs files
...
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (47 commits)
doc: CONFIG_UNEVICTABLE_LRU doesn't exist anymore
Update cpuset info & webiste for cgroups
dcdbas: force SMI to happen when expected
arch/arm/Kconfig: remove one to many l's in the word.
asm-generic/user.h: Fix spelling in comment
drm: fix printk typo 'sracth'
Remove one to many n's in a word
Documentation/filesystems/romfs.txt: fixing link to genromfs
drivers:scsi Change printk typo initate -> initiate
serial, pch uart: Remove duplicate inclusion of linux/pci.h header
fs/eventpoll.c: fix spelling
mm: Fix out-of-date comments which refers non-existent functions
drm: Fix printk typo 'failled'
coh901318.c: Change initate to initiate.
mbox-db5500.c Change initate to initiate.
edac: correct i82975x error-info reported
edac: correct i82975x mci initialisation
edac: correct commented info
fs: update comments to point correct document
target: remove duplicate include of target/target_core_device.h from drivers/target/target_core_hba.c
...
Trivial conflict in fs/eventpoll.c (spelling vs addition)
While trying to track down some NFS problems with BTRFS, I kept noticing I was
getting -EACCESS for no apparent reason. Eric Paris and printk() helped me
figure out that it was SELinux that was giving me grief, with the following
denial
type=AVC msg=audit(1290013638.413:95): avc: denied { 0x800000 } for pid=1772
comm="nfsd" name="" dev=sda1 ino=256 scontext=system_u:system_r:kernel_t:s0
tcontext=system_u:object_r:unlabeled_t:s0 tclass=file
Turns out this is because in d_obtain_alias if we can't find an alias we create
one and do all the normal instantiation stuff, but we don't do the
security_d_instantiate.
Usually we are protected from getting a hashed dentry that hasn't yet run
security_d_instantiate() by the parent's i_mutex, but obviously this isn't an
option there, so in order to deal with the case that a second thread comes in
and finds our new dentry before we get to run security_d_instantiate(), we go
ahead and call it if we find a dentry already. Eric assures me that this is ok
as the code checks to see if the dentry has been initialized already so calling
security_d_instantiate() against the same dentry multiple times is ok. With
this patch I'm no longer getting errant -EACCESS values.
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Have it nested inside ->i_mutex. Instead of using follow_down()
under namespace_sem, followed by grabbing i_mutex and checking that
mountpoint to be is not dead, do the following:
grab i_mutex
check that it's not dead
grab namespace_sem
see if anything is mounted there
if not, we've won
otherwise
drop locks
put_path on what we had
replace with what's mounted
retry everything with new mountpoint to be
New helper (lock_mount()) does that. do_add_mount(), do_move_mount(),
do_loopback() and pivot_root() switched to it; in case of the last
two that eliminates a race we used to have - original code didn't
do follow_down().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Don't hold vfsmount_lock over the loop traversing ->mnt_parent;
do check_mnt(new.mnt) under namespace_sem instead; combined with
namespace_sem held over all that code it'll guarantee the stability
of ->mnt_parent chain all the way to the root.
Doing check_mnt() outside of namespace_sem in case of pivot_root()
is wrong anyway.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
new function: mount_fs(). Does all work done by vfs_kern_mount()
except the allocation and filling of vfsmount; returns root dentry
or ERR_PTR().
vfs_kern_mount() switched to using it and taken to fs/namespace.c,
along with its wrappers.
alloc_vfsmnt()/free_vfsmnt() made static.
functions in namespace.c slightly reordered.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
1) Change from ->get_sb() to ->mount()
2) Use mount_single() instead of mount_nodev()
3) Pulled in ramfs_get_inode() & trimmed to what I need for pstore
4) Drop the ugly pstore_writefile() Just save data using kmalloc() and
provide a pstore_file_read() that uses simple_read_from_buffer().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
ext3: Always set dx_node's fake_dirent explicitly.
ext3: Fix an overflow in ext3_trim_fs.
jbd: Remove one to many n's in a word.
ext3: skip orphan cleanup on rocompat fs
ext2: Fix link count corruption under heavy link+rename load
ext3: speed up group trim with the right free block count.
ext3: Adjust trim start with first_data_block.
quota: return -ENOMEM when memory allocation fails
* 'nfs-for-2.6.39' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (54 commits)
RPC: killing RPC tasks races fixed
xprt: remove redundant check
SUNRPC: Convert struct rpc_xprt to use atomic_t counters
SUNRPC: Ensure we always run the tk_callback before tk_action
sunrpc: fix printk format warning
xprt: remove redundant null check
nfs: BKL is no longer needed, so remove the include
NFS: Fix a warning in fs/nfs/idmap.c
Cleanup: Factor out some cut-and-paste code.
cleanup: save 60 lines/100 bytes by combining two mostly duplicate functions.
NFS: account direct-io into task io accounting
gss:krb5 only include enctype numbers in gm_upcall_enctypes
RPCRDMA: Fix FRMR registration/invalidate handling.
RPCRDMA: Fix to XDR page base interpretation in marshalling logic.
NFSv4: Send unmapped uid/gids to the server when using auth_sys
NFSv4: Propagate the error NFS4ERR_BADOWNER to nfs4_do_setattr
NFSv4: cleanup idmapper functions to take an nfs_server argument
NFSv4: Send unmapped uid/gids to the server if the idmapper fails
NFSv4: If the server sends us a numeric uid/gid then accept it
NFSv4.1: reject zero layout with zeroed stripe unit
...
We need to make sure the dir items we get are valid dir items. So any time we
try and read one check it with verify_dir_item, which will do various sanity
checks to make sure it looks sane. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Doing an audit of where we use btrfs_search_slot only showed one place where we
don't check the return value of btrfs_search_slot properly. Just fix
mark_extent_written to see if btrfs_search_slot failed and act accordingly.
Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Currently if we have corrupted items things will blow up in spectacular ways.
So as we read in blocks and they are leaves, check the entire leaf to make sure
all of the items are correct and point to valid parts in the leaf for the item
data the are responsible for. If the item is corrupt we will kick back EIO and
not read any of the copies since they are likely to not be correct either. This
will catch generic corruptions, it will be up to the individual callers of
btrfs_search_slot to make sure their items are right. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Currently if we have corrupt metadata map_extent_buffer will complain about it,
but not return an error so the caller has no idea a problem was hit. Fix this.
Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Everytime I have to deal with btrfs_cont_expand I stare at it for 20 minutes
trying to remember what exactly it does and why the hell we need it. So add a
comment to save future-Josef some time. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Mark_inode_dirty will call btrfs_dirty_inode which will take care of updating
the inode. This makes setsize a little cleaner since we don't have to start a
transaction and update the inode in there, we can just call mark_inode_dirty.
Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
We don't need an orphan item when expanding files, we just need them for
truncating them, so only add the orphan item in btrfs_truncate instead of in
btrfs_setsize. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
This fixes a problem where if truncate fails the inode will still be on the in
memory orphan list. This is will make us complain when the inode gets destroyed
because it's still on the orphan list. So if we fail just remove us from the in
memory list and carry on.
Signed-off-by: Josef Bacik <josef@redhat.com>
If we cannot truncate an inode for some reason we will never delete the orphan
item associated with that inode, which means that we will loop forever in
btrfs_orphan_cleanup. Instead of doing this just return error so we fail to
mount. It sucks, but hey it's better than hanging. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Now that we can handle having errors in the truncate path lets make sure we
return errors instead of doing BUG_ON() and such. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
->truncate() is going away, instead all of the work needs to be done in
->setattr(). So this converts us over to do this. It's fairly straightforward,
just get rid of our .truncate inode operation and call btrfs_truncate() directly
from btrfs_setsize. This works out better for us since truncate can technically
return ENOSPC, and before we had no way of letting anybody know. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Since we alloc/free free space entries a whole lot, lets use a slab to keep
track of them. This makes some of my tests slightly faster. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
We track delayed allocation per inodes via 2 counters, one is
outstanding_extents and reserved_extents. Outstanding_extents is already an
atomic_t, but reserved_extents is not and is protected by a spinlock. So
convert this to an atomic_t and instead of using a spinlock, use atomic_cmpxchg
when releasing delalloc bytes. This makes our inode 72 bytes smaller, and
reduces locking overhead (albiet it was minimal to begin with). Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Really we don't need to memset the pages array at all, since we know how many
pages we're going to use in the array and pass that around. So don't memset,
just trust we're not idiots and we pass num_pages around properly.
Signed-off-by: Josef Bacik <josef@redhat.com>
Our aio_write function is huge and kind of hard to follow at times. So this
patch fixes this by breaking out the buffered and direct write paths out into
seperate functions so it's a little clearer what's going on. I've also fixed
some wrong typing that we had and added the ability to handle getting an error
back from btrfs_set_extent_delalloc. Tested this with xfstests and everything
came out fine. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
We must not use dummy for index.
After the first index, READ32(dummy) will change dummy!!!!
Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com>
[bfields@redhat.com: Trond points out READ_BUF alone is sufficient.]
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Replace EXTRA_CFLAGS with ccflags-y. And change ntfs-objs to ntfs-y
for cleaner conditional inclusion.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
We don't have proper reference counting for this yet, so we run into
cases where the device is pulled and we OOPS on flushing the fs data.
This happens even though the dirty inodes have already been
migrated to the default_backing_dev_info.
Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Tested-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
MD and DM create a new bio_set for every metadevice. Each bio_set has an
integrity mempool attached regardless of whether the metadevice is
capable of passing integrity metadata. This is a waste of memory.
Instead we defer the allocation decision to MD and DM since we know at
metadevice creation time whether integrity passthrough is needed or not.
Automatic integrity mempool allocation can then be removed from
bioset_create() and we make an explicit integrity allocation for the
fs_bio_set.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reported-by: Zdenek Kabelac <zkabelac@redhat.com>
Acked-by: Mike Snitzer <snizer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
'write_op' was still used, even though it was always WRITE_SYNC now.
Add plugging around the cases where it submits IO, and flush them
before we end up waiting for that IO.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
'write_op' was still used, even though it was always WRITE_SYNC now.
Add plugging around the cases where it submits IO, and flush them
before we end up waiting for that IO.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
It used WRITE_SYNC_PLUG before and potentially submits a batch
of IO, so lets enable plugging for this case.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* 'mnt_devname' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
vfs: bury ->get_sb()
nfs: switch NFS from ->get_sb() to ->mount()
nfs: stop mangling ->mnt_devname on NFS
vfs: new superblock methods to override /proc/*/mount{s,info}
nfs: nfs_do_{ref,sub}mount() superblock argument is redundant
nfs: make nfs_path() work without vfsmount
nfs: store devname at disconnected NFS roots
nfs: propagate devname to nfs{,4}_get_root()
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
[IA64] tioca: Fix assignment from incompatible pointer warnings
[IA64] mca.c: Fix cast from integer to pointer warning
[IA64] setup.c Typo fix "Architechtuallly"
[IA64] Add CONFIG_MISC_DEVICES=y to configs that need it.
[IA64] disable interrupts at end of ia64_mca_cpe_int_handler()
[IA64] Add DMA_ERROR_CODE define.
pstore: fix build warning for unused return value from sysfs_create_file
pstore: X86 platform interface using ACPI/APEI/ERST
pstore: new filesystem interface to platform persistent storage
* 'config' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
BKL: That's all, folks
fs/locks.c: Remove stale FIXME left over from BKL conversion
ipx: remove the BKL
appletalk: remove the BKL
x25: remove the BKL
ufs: remove the BKL
hpfs: remove the BKL
drivers: remove extraneous includes of smp_lock.h
tracing: don't trace the BKL
adfs: remove the big kernel lock
When allocating a new inode, we need to make sure i_sync_tid and
i_datasync_tid are initialized. Otherwise, one or both of these two
values could be left initialized to zero, which could potentially
result in BUG_ON in jbd2_journal_commit_transaction.
(This could happen by having journal->commit_request getting set to
zero, which could wake up the kjournald process even though there is
no running transaction, which then causes a BUG_ON via the
J_ASSERT(j_ruinning_transaction != NULL) statement.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The last remaining instances of ->get_sb() can be converted ->mount()
now - nothing in them uses new vfsmount anymore.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
a) ->show_devname(m, mnt) - what to put into devname columns in mounts,
mountinfo and mountstats
b) ->show_path(m, mnt) - what to put into relative path column in mountinfo
Leaving those NULL gives old behaviour. NFS switched to using those.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
part 3: now we have everything to get nfs_path() just by dentry -
just follow to (disconnected) root and pick the rest of the thing
there.
Start killing propagation of struct vfsmount * on the paths that
used to bring it to nfs_path().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
part 2: make sure that disconnected roots have corresponding mnt_devname
values stashed into them.
Have nfs*_get_root() stuff a copy of devname into ->d_fsdata of the
found root, provided that it is disconnected.
Have ->d_release() free it when dentry goes away.
Have the places where NFS uses ->d_fsdata for sillyrename (and that
can *never* happen to a disconnected root - dentry will be attached
to its parent) free old devname copies if they find those.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (33 commits)
AppArmor: kill unused macros in lsm.c
AppArmor: cleanup generated files correctly
KEYS: Add an iovec version of KEYCTL_INSTANTIATE
KEYS: Add a new keyctl op to reject a key with a specified error code
KEYS: Add a key type op to permit the key description to be vetted
KEYS: Add an RCU payload dereference macro
AppArmor: Cleanup make file to remove cruft and make it easier to read
SELinux: implement the new sb_remount LSM hook
LSM: Pass -o remount options to the LSM
SELinux: Compute SID for the newly created socket
SELinux: Socket retains creator role and MLS attribute
SELinux: Auto-generate security_is_socket_class
TOMOYO: Fix memory leak upon file open.
Revert "selinux: simplify ioctl checking"
selinux: drop unused packet flow permissions
selinux: Fix packet forwarding checks on postrouting
selinux: Fix wrong checks for selinux_policycap_netpeer
selinux: Fix check for xfrm selinux context algorithm
ima: remove unnecessary call to ima_must_measure
IMA: remove IMA imbalance checking
...
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: (46 commits)
fs/9p: Make the writeback_fid owned by root
fs/9p: Writeback dirty data before setattr
fs/9p: call vmtruncate before setattr 9p opeation
fs/9p: Properly update inode attributes on link
fs/9p: Prevent multiple inclusion of same header
fs/9p: Workaround vfs rename rehash bug
fs/9p: Mark directory inode invalid for many directory inode operations
fs/9p: Add . and .. dentry revalidation flag
fs/9p: mark inode attribute invalid on rename, unlink and setattr
fs/9p: Add support for marking inode attribute invalid
fs/9p: Initialize root inode number for dotl
fs/9p: Update link count correctly on different file system operations
fs/9p: Add drop_inode 9p callback
fs/9p: Add direct IO support in cached mode
fs/9p: Fix inode i_size update in file_write
fs/9p: set default readahead pages in cached mode
fs/9p: Move writeback fid to v9fs_inode
fs/9p: Add v9fs_inode
fs/9p: Don't set stat.st_blocks based on nrpages
fs/9p: Add inode hashing
...
* 'for-2.6.39' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: fix build failure introduced by s/freezeable/freezable/
workqueue: add system_freezeable_wq
rds/ib: use system_wq instead of rds_ib_fmr_wq
net/9p: replace p9_poll_task with a work
net/9p: use system_wq instead of p9_mux_wq
xfs: convert to alloc_workqueue()
reiserfs: make commit_wq use the default concurrency level
ocfs2: use system_wq instead of ocfs2_quota_wq
ext4: convert to alloc_workqueue()
scsi/scsi_tgt_lib: scsi_tgtd isn't used in memory reclaim path
scsi/be2iscsi,qla2xxx: convert to alloc_workqueue()
misc/iwmc3200top: use system_wq instead of dedicated workqueues
i2o: use alloc_workqueue() instead of create_workqueue()
acpi: kacpi*_wq don't need WQ_MEM_RECLAIM
fs/aio: aio_wq isn't used in memory reclaim path
input/tps6507x-ts: use system_wq instead of dedicated workqueue
cpufreq: use system_wq instead of dedicated workqueues
wireless/ipw2x00: use system_wq instead of dedicated workqueues
arm/omap: use system_wq in mailbox
workqueue: use WQ_MEM_RECLAIM instead of WQ_RESCUER
According to rfc5661,
ca_maxresponsesize_cached:
Like ca_maxresponsesize, but the maximum size of a reply that
will be stored in the reply cache (Section 2.10.6.1). For each
channel, the server MAY decrease this value, but MUST NOT
increase it.
the latest kernel(2.6.38-rc8) may increase the value for ignoring
request's ca_maxresponsesize_cached value. We should not ignore it.
Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It turns out that while a maximum of 8 partitions may be what people
"should" have had, you can actually fit up to 18 entries(*) in a sector.
And some people clearly were taking advantage of that, like Michael
Cree, who had ten partitions on one of his OSF disks.
(*) The OSF partition data starts at byte offset 64 in the first sector,
and the array of 16-byte partition entries start at offset 148 in
the on-disk partition structure.
Reported-by: Michael Cree <mcree@orcon.net.nz>
Cc: stable@kernel.org (v2.6.38)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
iprune_sem is continously giving us lockdep warnings because we do take it in
read mode in the reclaim path, but we're also doing non-NOFS allocations under
it taken in write mode.
Taking a bit deeper look at it I think it's fixable quite trivially:
- for invalidate_inodes we do not need iprune_sem at all. We have an active
reference on the superblock, so the filesystem is not going away until it
has finished.
- for evict_inodes we do need it, to make sure prune_icache has done it's
work before we tear down the superblock. But there is no reason to
hold it over the actual reclaim operation - it's enough to cycle through
it after the actual reclaim to make sure we wait for any pending
prune_icache to complete. We just have to remove the WARN_ON for
otherwise busy inodes as they can actually happen now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When debugging is enabled, we allocate a buffer of PEB size for
various debugging purposes. However, now all users of this buffer
are gone and we can safely remove it and save 128KiB or more RAM.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Instead of using pre-allocated 'c->dbg->buf' buffer in
'dbg_scan_orphans()', dynamically allocate it when needed. The intend
is to get rid of the pre-allocated 'c->dbg->buf' buffer and save
128KiB of RAM (or more if PEB size is larger). Indeed, currently we
allocate this memory even if the user never enables any self-check,
which is wasteful.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Instead of using pre-allocated 'c->dbg->buf' buffer in
'dump_lpt_leb()', dynamically allocate it when needed. The intend
is to get rid of the pre-allocated 'c->dbg->buf' buffer and save
128KiB of RAM (or more if PEB size is larger). Indeed, currently we
allocate this memory even if the user never enables any self-check,
which is wasteful.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Instead of using pre-allocated 'c->dbg->buf' buffer in
'dbg_check_ltab_lnum()', dynamically allocate it when needed. The
intend is to get rid of the pre-allocated 'c->dbg->buf' buffer and
save 128KiB of RAM (or more if PEB size is larger). Indeed,
currently we allocate this memory even if the user never enables
any self-check, which is wasteful.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Instead of using pre-allocated 'c->dbg->buf' buffer in
'scan_check_cb()', dynamically allocate it when needed. The intend
is to get rid of the pre-allocated 'c->dbg->buf' buffer and save
128KiB of RAM (or more if PEB size is larger). Indeed, currently we
allocate this memory even if the user never enables any self-check,
which is wasteful.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Instead of using pre-allocated 'c->dbg->buf' buffer in
'dbg_dump_leb()', dynamically allocate it when needed. The intend
is to get rid of the pre-allocated 'c->dbg->buf' buffer and save
128KiB of RAM (or more if PEB size is larger). Indeed, currently we
allocate this memory even if the user never enables any self-check,
which is wasteful.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Handle the rare case where a directory metadata block is uncompressed and
corrupted, leading to a kernel oops in directory scanning (memcpy).
Normally corruption is detected at the decompression stage and dealt with
then, however, this will not happen if:
- metadata isn't compressed (users can optionally request no metadata
compression), or
- the compressed metadata block was larger than the original, in which
case the uncompressed version was used, or
- the data was corrupt after decompression
This patch fixes this by adding some sanity checks against known maximum
values.
Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (57 commits)
tidy the trailing symlinks traversal up
Turn resolution of trailing symlinks iterative everywhere
simplify link_path_walk() tail
Make trailing symlink resolution in path_lookupat() iterative
update nd->inode in __do_follow_link() instead of after do_follow_link()
pull handling of one pathname component into a helper
fs: allow AT_EMPTY_PATH in linkat(), limit that to CAP_DAC_READ_SEARCH
Allow passing O_PATH descriptors via SCM_RIGHTS datagrams
readlinkat(), fchownat() and fstatat() with empty relative pathnames
Allow O_PATH for symlinks
New kind of open files - "location only".
ext4: Copy fs UUID to superblock
ext3: Copy fs UUID to superblock.
vfs: Export file system uuid via /proc/<pid>/mountinfo
unistd.h: Add new syscalls numbers to asm-generic
x86: Add new syscalls for x86_64
x86: Add new syscalls for x86_32
fs: Remove i_nlink check from file system link callback
fs: Don't allow to create hardlink for deleted file
vfs: Add open by file handle support
...
The new vfs locking scheme introduced in 2.6.38 breaks NFS sillyrename
because the latter relies on being able to determine the parent
directory of the dentry in the ->iput() callback in order to send the
appropriate unlink rpc call.
Looking at the code that cares about races with dput(), there doesn't
seem to be anything that specifically uses d_parent as a test for
whether or not there is a race:
- __d_lookup_rcu(), __d_lookup() all test for d_hashed() after d_parent
- shrink_dcache_for_umount() is safe since nothing else can rearrange
the dentries in that super block.
- have_submount(), select_parent() and d_genocide() can test for a
deletion if we set the DCACHE_DISCONNECTED flag when the dentry
is removed from the parent's d_subdirs list.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org (2.6.38, needs commit c826cb7dfc "dcache.c:
create helper function for duplicated functionality" )
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This creates a helper function for he "try to ascend into the parent
directory" case, which was written out in triplicate before. With all
the locking and subtle sequence number stuff, we really don't want to
duplicate that kind of code.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* pull the handling of current->total_link_count into
__do_follow_link()
* put the common "do ->put_link() if needed and path_put() the link"
stuff into a helper (put_link(nd, link, cookie))
* rename __do_follow_link() to follow_link(), while we are at it
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The last remaining place (resolution of nested symlink) converted
to the loop of the same kind we have in path_lookupat() and
path_openat().
Note that we still *do* have a recursion in pathname resolution;
can't avoid it, really. However, it's strictly for nested symlinks
now - i.e. ones in the middle of a pathname.
link_path_walk() has lost the tail now - it always walks everything
except the last component.
do_follow_link() renamed to nested_symlink() and moved down.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
