mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-21 03:33:59 +08:00
8366404bf1
11071 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Hans de Goede
|
e907df3272 |
watchdog: Add support for dynamically allocated watchdog_device structs
If a driver's watchdog_device struct is part of a dynamically allocated struct (which it often will be), merely locking the module is not enough, even with a drivers module locked, the driver can be unbound from the device, examples: 1) The root user can unbind it through sysfd 2) The i2c bus master driver being unloaded for an i2c watchdog I will gladly admit that these are corner cases, but we still need to handle them correctly. The fix for this consists of 2 parts: 1) Add ref / unref operations, so that the driver can refcount the struct holding the watchdog_device struct and delay freeing it until any open filehandles referring to it are closed 2) Most driver operations will do IO on the device and the driver should not do any IO on the device after it has been unbound. Rather then letting each driver deal with this internally, it is better to ensure at the watchdog core level that no operations (other then unref) will get called after the driver has called watchdog_unregister_device(). This actually is the bulk of this patch. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> |
||
|
Hans de Goede
|
f4e9c82f64 |
watchdog: Add Locking support
This patch fixes some potential multithreading issues, despite only allowing one process to open the /dev/watchdog device, we can still get called multiple times at the same time, since a program could be using thread, or could share the fd after a fork. This causes 2 potential problems: 1) watchdog_start / open do an unlocked test_n_set / test_n_clear, if these 2 race, the watchdog could be stopped while the active bit indicates it is running or visa versa. 2) Most watchdog_dev drivers probably assume that only one watchdog-op will get called at a time, this is not necessary true atm. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> |
||
Alan Cox
|
d6b469d915 |
watchdog: create all the proper device files
Create the watchdog class and it's associated devices. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> |
||
|
Alan Cox
|
45f5fed30a |
watchdog: Add multiple device support
We keep the old /dev/watchdog interface file for the first watchdog via miscdev. This is basically a cut and paste of the relevant interface code from the rtc driver layer tweaked for watchdog. Revised to fix problems noted by Hans de Goede Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> |
||
Linus Torvalds
|
7e5b2db77b |
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
"The whole series has been sitting in -next for quite a while with no
complaints. The last change to the series was before the weekend the
removal of an SPI patch which Grant - even though previously acked by
himself - appeared to raise objections. So I removed it until the
situation is clarified. Other than that all the patches have the acks
from their respective maintainers, all MIPS and x86 defconfigs are
building fine and I'm not aware of any problems introduced by this
series.
Among the key features for this patch series is a sizable patchset for
Lantiq which among other things introduces support for Lantiq's
flagship product, the FALCON SOC. It also means that the opensource
developers behind this patchset have overtaken Lantiq's competing
inhouse development team that was working behind closed doors.
Less noteworthy the ath79 patchset which adds support for a few more
chip variants, cleanups and fixes. Finally the usual dose of tweaking
of generic code."
Fix up trivial conflicts in arch/mips/lantiq/xway/gpio_{ebu,stp}.c where
printk spelling fixes clashed with file move and eventual removal of the
printk.
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (81 commits)
MIPS: lantiq: remove orphaned code
MIPS: Remove all -Wall and almost all -Werror usage from arch/mips.
MIPS: lantiq: implement support for FALCON soc
MTD: MIPS: lantiq: verify that the NOR interface is available on falcon soc
MTD: MIPS: lantiq: implement OF support
watchdog: MIPS: lantiq: implement OF support and minor fixes
SERIAL: MIPS: lantiq: implement OF support
GPIO: MIPS: lantiq: convert gpio-stp-xway to OF
GPIO: MIPS: lantiq: convert gpio-mm-lantiq to OF and of_mm_gpio
GPIO: MIPS: lantiq: move gpio-stp and gpio-ebu to the subsystem folder
MIPS: pci: convert lantiq driver to OF
MIPS: lantiq: convert dma to platform driver
MIPS: lantiq: implement support for clkdev api
MIPS: lantiq: drop ltq_gpio_request() and gpio_to_irq()
OF: MIPS: lantiq: implement irq_domain support
OF: MIPS: lantiq: implement OF support
MIPS: lantiq: drop mips_machine support
OF: PCI: const usage needed by MIPS
MIPS: Cavium: Remove smp_reserve_lock.
MIPS: Move cache setup to setup_arch().
...
|
||
Roland Stigge
|
e862e7c4ee |
drivers/rtc/rtc-lpc32xx.c: add device tree support
Adds device tree support for rtc-lpc32xx.c Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Viresh Kumar
|
0108c4ff62 |
rtc/spear: add Device Tree probing capability
SPEAr platforms now support DT and so must convert all drivers support DT. This patch adds DT probing support for rtc and updates its documentation too. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Cc: Stefan Roese <sr@denx.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Rob Herring <robherring2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Johan Hovold
|
401dea7f7a |
leds: add LM3533 LED driver
Add sub-driver for the LEDs on National Semiconductor / TI LM3533 lighting power chips. The chip provides 256 brightness levels, hardware accelerated blinking as well as ambient-light-sensor and pwm input control. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Rob Landley <rob@landley.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Jonathan Cameron <jic23@cam.ac.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Shuah Khan
|
44e1e9f8e7 |
leds: add new transient trigger for one shot timer activation
The leds timer trigger does not currently have an interface to activate a one shot timer. The current support allows for setting two timers, one for specifying how long a state to be on, and the second for how long the state to be off. The delay_on value specifies the time period an LED should stay in on state, followed by a delay_off value that specifies how long the LED should stay in off state. The on and off cycle repeats until the trigger gets deactivated. There is no provision for one time activation to implement features that require an on or off state to be held just once and then stay in the original state forever. Without one shot timer interface, user space can still use timer trigger to set a timer to hold a state, however when user space application crashes or goes away without deactivating the timer, the hardware will be left in that state permanently. As a specific example of this use-case, let's look at vibrate feature on phones. Vibrate function on phones is implemented using PWM pins on SoC or PMIC. There is a need to activate one shot timer to control the vibrate feature, to prevent user space crashes leaving the phone in vibrate mode permanently causing the battery to drain. This trigger exports three properties, activate, state, and duration When transient trigger is activated these properties are set to default values. - duration allows setting timer value in msecs. The initial value is 0. - activate allows activating and deactivating the timer specified by duration as needed. The initial and default value is 0. This will allow duration to be set after trigger activation. - state allows user to specify a transient state to be held for the specified duration. Signed-off-by: Shuah Khan <shuahkhan@gmail.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: NeilBrown <neilb@suse.de> Cc: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Johan Hovold
|
7f26c970b4 |
backlight: add LM3533 backlight driver
Add sub-driver for the backlights on National Semiconductor / TI LM3533 lighting power chips. The chip provides 256 brightness levels and ambient-light-sensor and pwm input control. [akpm@linux-foundation.org: fix warning] [akpm@linux-foundation.org: fix the type of `mode'] Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Rob Landley <rob@landley.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Jonathan Cameron <jic23@cam.ac.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
KAMEZAWA Hiroyuki
|
cc926f7842 |
memcg: move charges to root cgroup if use_hierarchy=0
Presently, at removal of cgroup, ->pre_destroy() is called and moves charges to the parent cgroup. A major reason for returning -EBUSY from ->pre_destroy() is that the 'moving' hits the parent's resource limitation. It happens only when use_hierarchy=0. Considering use_hierarchy=0, all cgroups should be flat. So, no one cannot justify moving charges to parent...parent and children are in flat configuration, not hierarchical. This patch modifes the code to move charges to the root cgroup at rmdir/force_empty if use_hierarchy==0. This will much simplify rmdir() and reduce error in ->pre_destroy. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ying Han <yinghan@google.com> Cc: Glauber Costa <glommer@parallels.com> Reviewed-by: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Frederic Weisbecker
|
2bb2ba9d51 |
rescounters: add res_counter_uncharge_until()
When killing a res_counter which is a child of other counter, we need to do res_counter_uncharge(child, xxx) res_counter_charge(parent, xxx) This is not atomic and wastes CPU. This patch adds res_counter_uncharge_until(). This function's uncharge propagates to ancestors until specified res_counter. res_counter_uncharge_until(child, parent, xxx) Now the operation is atomic and efficient. Signed-off-by: Frederic Weisbecker <fweisbec@redhat.com> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Ying Han <yinghan@google.com> Cc: Glauber Costa <glommer@parallels.com> Reviewed-by: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
KAMEZAWA Hiroyuki
|
4b91355e9d |
memcg: fix/change behavior of shared anon at moving task
This patch changes memcg's behavior at task_move().
At task_move(), the kernel scans a task's page table and move the changes
for mapped pages from source cgroup to target cgroup. There has been a
bug at handling shared anonymous pages for a long time.
Before patch:
- The spec says 'shared anonymous pages are not moved.'
- The implementation was 'shared anonymoys pages may be moved'.
If page_mapcount <=2, shared anonymous pages's charge were moved.
After patch:
- The spec says 'all anonymous pages are moved'.
- The implementation is 'all anonymous pages are moved'.
Considering usage of memcg, this will not affect user's experience.
'shared anonymous' pages only exists between a tree of processes which
don't do exec(). Moving one of process without exec() seems not sane.
For example, libcgroup will not be affected by this change. (Anyway, no
one noticed the implementation for a long time...)
Below is a discussion log:
- current spec/implementation are complex
- Now, shared file caches are moved
- It adds unclear check as page_mapcount(). To do correct check,
we should check swap users, etc.
- No one notice this implementation behavior. So, no one get benefit
from the design.
- In general, once task is moved to a cgroup for running, it will not
be moved....
- Finally, we have control knob as memory.move_charge_at_immigrate.
Here is a patch to allow moving shared pages, completely. This makes
memcg simpler and fix current broken code.
Suggested-by: Hugh Dickins <hughd@google.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Glauber Costa <glommer@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
Mel Gorman
|
692569946f |
mm: document the meminfo and vmstat fields of relevance to transparent hugepages
Update Documentation/vm/transhuge.txt and Documentation/filesystems/proc.txt with some information on monitoring transparent huge page usage and the associated overhead. Signed-off-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Hugh Dickins
|
17cf28afea |
mm/fs: remove truncate_range
Remove vmtruncate_range(), and remove the truncate_range method from struct inode_operations: only tmpfs ever supported it, and tmpfs has now converted over to using the fallocate method of file_operations. Update Documentation accordingly, adding (setlease and) fallocate lines. And while we're in mm.h, remove duplicate declarations of shmem_lock() and shmem_file_setup(): everyone is now using the ones in shmem_fs.h. Based-on-patch-by: Cong Wang <amwang@redhat.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Cong Wang <amwang@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Johannes Weiner
|
eb6332a545 |
Documentation: memcg: future proof hierarchical statistics documentation
The hierarchical versions of per-memcg counters in memory.stat are all calculated the same way and are all named total_<counter>. Documenting the pattern is easier for maintenance than listing each counter twice. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Ying Han <yinghan@google.com> Randy Dunlap <rdunlap@xenotime.net> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
4b78147468 |
MFD changes for 3.5
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=Rh0r
-----END PGP SIGNATURE-----
Merge tag 'mfd-3.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6
Pull MFD changes from Samuel Ortiz:
"Besides the usual cleanups, this one brings:
* Support for 5 new chipsets: Intel's ICH LPC and SCH Centerton,
ST-E's STAX211, Samsung's MAX77693 and TI's LM3533.
* Device tree support for the twl6040, tps65910, da9502 and ab8500
drivers.
* Fairly big tps56910, ab8500 and db8500 updates.
* i2c support for mc13xxx.
* Our regular update for the wm8xxx driver from Mark."
Fix up various conflicts with other trees, largely due to ab5500 removal
etc.
* tag 'mfd-3.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (106 commits)
mfd: Fix build break of max77693 by adding REGMAP_I2C option
mfd: Fix twl6040 build failure
mfd: Fix max77693 build failure
mfd: ab8500-core should depend on MFD_DB8500_PRCMU
gpio: tps65910: dt: process gpio specific device node info
mfd: Remove the parsing of dt info for tps65910 gpio
mfd: Save device node parsed platform data for tps65910 sub devices
mfd: Add r_select to lm3533 platform data
gpio: Add Intel Centerton support to gpio-sch
mfd: Emulate active low IRQs as well as active high IRQs for wm831x
mfd: Mark two lm3533 zone registers as volatile
mfd: Fix return type of lm533 attribute is_visible
mfd: Enable Device Tree support in the ab8500-pwm driver
mfd: Enable Device Tree support in the ab8500-sysctrl driver
mfd: Add support for Device Tree to twl6040
mfd: Register the twl6040 child for the ASoC codec unconditionally
mfd: Allocate twl6040 IRQ numbers dynamically
mfd: twl6040 code cleanup in interrupt initialization part
mfd: Enable ab8500-gpadc driver for Device Tree
mfd: Prevent unassigned pointer from being used in ab8500-gpadc driver
...
|
||
|
Linus Torvalds
|
d766023eea |
Merge branch 'doc' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull documentation updates from Jiri Kosina: "I am currently relaying documentation patches through 'doc' branch of trivial tree, until Rob, the new documentation maintainer, has established a proper tree." * 'doc' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: doc: ext3: update documentation with barrier=1 default Documentation/initrd.txt: Change the location of util-linux Documentation/SubmittingPatches: suggested the use of scripts/get_maintainer.pl Documentation/kernel-parameters: remove autotest and mcatest |
||
|
Linus Torvalds
|
da85d3426f |
Merge branch 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kconfig changes from Michal Marek:
- Error handling for make KCONFIG_ALLCONFIG=<...> all*config plus a fix
for a bug that was exposed by this
- Fix for the script/config utility.
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
scripts/config: properly report and set string options
kbuild: all{no,yes,mod,def,rand}config only read files when instructed to.
kconfig: Add error handling to KCONFIG_ALLCONFIG
|
||
|
Linus Torvalds
|
1347a2cebc |
Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild updates from Michal Marek.
Fixed up nontrivial merge conflict in Makefile as per Stephen Rothwell
and linux-next (and trivial arch/sparc/Makefile changes due to removed
sparc32 logic).
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
mips: Fix KBUILD_CPPFLAGS definition
kbuild: fix ia64 link
kbuild: document KBUILD_LDS, KBUILD_VMLINUX_{INIT,MAIN} and LDFLAGS_vmlinux
kbuild: link of vmlinux moved to a script
kbuild: refactor final link of sparc32
kbuild: drop unused KBUILD_VMLINUX_OBJS from top-level Makefile
kbuild: Makefile: remove unnecessary check for m68knommu ARCH
|
||
|
Linus Torvalds
|
90324cc1b1 |
avoid iput() from flusher thread
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJPw2J/AAoJECvKgwp+S8Ja5jkP/3uMxkhf8XQpXCI3O1QVfaQr uZFfM8sINqIPDVm1dtFjFj7f8Bw9mhE2KAnnJ1rKT8tQwqq9yAse1QPlhCG1ZqoP +AnMDDXHtx7WmQZXhBvS9b+unpZ7Jr6r6pO5XrmTL2kRL3YJPUhZ2+xbTT5belTB KoAu4WqORZRxfXoC76S7U8K+D4NcAGhAOxCClsIjmY+oocCiCag4FZOyzYIFViqc ghUN/+rLQ3fqGGv2yO7Ylx1gUM7sxIwkZQ/h962jFAtxz9czImr2NmRoMliOaOkS tvcnIf+E3u0n/zIjzFvzhxKgHJPP8PkcPMk60d3jKmFngBkqFTzNUeVTP8md7HrV 4DlXisWr+z7YVyWUCFaNcJLmjiWSwQ8DV/clRLobeBf9EJKan5F1PjFgl6PLJM5F Qr1+LHMNaetdulBwMRTyveZTzYqw9RmDnD9dWMo4mX/kTpvtC4jTPVV7hkRD+Qlv 5vTRR+VXL3Q50yClLf0AQMSKTnH2gBuepM/b+7cShLGfsMln8DtUjmbigv+niL63 BibcCIbIlP2uWGnl37VhsC34AT+RKt3lggrBOpn/7XJMq/wKR7IRP/7V9TfYgaUN NBa+wtnLDa1pZEn/X7izdcQP62PzDtmB+ObvYT0Yb40A4+2ud3qF/lB53c1A1ewF /9c4zxxekjHZnn2oooEa =oLXf -----END PGP SIGNATURE----- Merge tag 'writeback' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux Pull writeback tree from Wu Fengguang: "Mainly from Jan Kara to avoid iput() in the flusher threads." * tag 'writeback' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux: writeback: Avoid iput() from flusher thread vfs: Rename end_writeback() to clear_inode() vfs: Move waiting for inode writeback from end_writeback() to evict_inode() writeback: Refactor writeback_single_inode() writeback: Remove wb->list_lock from writeback_single_inode() writeback: Separate inode requeueing after writeback writeback: Move I_DIRTY_PAGES handling writeback: Move requeueing when I_SYNC set to writeback_sb_inodes() writeback: Move clearing of I_SYNC into inode_sync_complete() writeback: initialize global_dirty_limit fs: remove 8 bytes of padding from struct writeback_control on 64 bit builds mm: page-writeback.c: local functions should not be exposed globally |
||
|
Linus Torvalds
|
ae32adc1e0 |
Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux
Pull i2c-embedded changes from Wolfram Sang:
"Major changes:
- lots of devicetree additions for existing drivers. I tried hard to
make sure the bindings are proper. In more complicated cases, I
requested acks from people having more experience with them than
me. That took a bit of extra time and also some time went into
discussions with developers about what bindings are and what not.
I have the feeling that the workflow with bindings should be
improved to scale better. I will spend some more thought on
this...
- i2c-muxes are succesfully used meanwhile, so we dropped
EXPERIMENTAL for them and renamed the drivers to a standard pattern
to match the rest of the subsystem. They can also be used with
devicetree now.
- ixp2000 was removed since the whole platform goes away.
- cleanups (strlcpy instead of strcpy, NULL instead of 0)
- The rest is typical driver fixes I assume.
All patches have been in linux-next at least since v3.4-rc6."
Fixed up trivial conflict in arch/arm/mach-lpc32xx/common.c due to the
same patch already having come in through the arm/soc trees, with
additional patches on top of it.
* 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (35 commits)
i2c: davinci: Free requested IRQ in remove
i2c: ocores: register OF i2c devices
i2c: tegra: notify transfer-complete after clearing status.
I2C: xiic: Add OF binding support
i2c: Rename last mux driver to standard pattern
i2c: tegra: fix 10bit address configuration
i2c: muxes: rename first set of drivers to a standard pattern
of/i2c: implement of_find_i2c_adapter_by_node
i2c: implement i2c_verify_adapter
i2c-s3c2410: Add HDMIPHY quirk for S3C2440
i2c-s3c2410: Rework device type handling
i2c: muxes are not EXPERIMENTAL anymore
i2c/of: Automatically populate i2c mux busses from device tree data.
i2c: Add a struct device * parameter to i2c_add_mux_adapter()
of/i2c: call i2c_verify_client from of_find_i2c_device_by_node
i2c: designware: Add clk_{un}prepare() support
i2c: designware: add PM support
i2c: ixp2000: remove driver
i2c: pnx: add device tree support
i2c: imx: don't use strcpy but strlcpy
...
|
||
|
Linus Torvalds
|
30b842889e |
arm-soc: soc specific changes, part 2
This adds support for the spear13xx platform, which has first been under review a long time ago and finally been completed after generic spear work has gone into the clock, dt and pinctrl branches. Also a number of updates for the samsung socs are part of this branch. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJPuezDAAoJEIwa5zzehBx3mooP/iTHd1wRjr2MzKNx4+LpLWgl aAXH002xe9Lvu7m75BRvEYWWdRLkyEy9ARM4s2wJCnxU41KmbF65ED1erxK8xaSe Ako34vzH+HiUCM2DLzIP6FXyJMM7OcfrdGaY/GxOv+U+MzGUHeu3Q+8b0B/yfBnm M3HdDrpyZHKZP9UM3wVQ4/ilDck6vEjYSV2jC11IaHiDMRD2nSpfRKh8H3+gv65S gtj9EZpWM8CZg/fCe5lsm3PZnBnqHHW3WVafVnDQfGWeJYqZxMB5QKLU6qf/ntpx LU2WjXoGaMmGBVZWynrwNEY6GVp3fZrDV30/q8Htf0/fBpEjUncrLHXtw0DxkpnK UuyoRgn7zxOc3kDzohFNIexp1K3q+PNzXklR9hg7OSVji+9bPd2LIOEnpBeghBGj WzZIebz5dIdddHlnOl4fRdmxZva2UTuI4bFAJ0izi10Mup7A9lrENnFHG/iVA0rQ QlqJZoyeDCvbXQqZCgHirYRPhIxXdQj4G5IivfRxQ7Jgjy76Kt9uDp1egwezF/3a 2jVtcK42XokVv3Dhsvq9UNFn9GWdVImZ7eh70XLv+q834zAVxSzjWLtlS8I1Q5WO 7BGIJaICtugNwgYr44Dif6nsoVUmMnSwU5hVw1pApKZspN6EhMhMdp2hw8JPHFUs mrZdHi1NAWuYSbObc3UB =W2Ri -----END PGP SIGNATURE----- Merge tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull arm-soc: soc specific changes (part 2) from Olof Johansson: "This adds support for the spear13xx platform, which has first been under review a long time ago and finally been completed after generic spear work has gone into the clock, dt and pinctrl branches. Also a number of updates for the samsung socs are part of this branch." Fix up trivial conflicts in drivers/gpio/gpio-samsung.c that look much worse than they are: the exonys5 init code was refactored in commit |
||
|
Linus Torvalds
|
84a442b9a1 |
arm-soc: device tree conversions, part 2
These continue the device tree work from part 1, this set is for the
tegra, mxs and imx platforms, all of which have dependencies on clock
or pinctrl changes submitted earlier.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=WeDQ
-----END PGP SIGNATURE-----
Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull arm-soc device tree conversions (part 2) from Olof Johansson:
"These continue the device tree work from part 1, this set is for the
tegra, mxs and imx platforms, all of which have dependencies on clock
or pinctrl changes submitted earlier."
Fix up trivial conflicts due to nearby changes in
drivers/{gpio/gpio,i2c/busses/i2c}-mxs.c
* tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits)
ARM: dt: tegra: invert status=disable vs status=okay
ARM: dt: tegra: consistent basic property ordering
ARM: dt: tegra: sort nodes based on bus order
ARM: dt: tegra: remove duplicate device_type property
ARM: dt: tegra: consistenly use lower-case for hex constants
ARM: dt: tegra: format regs properties consistently
ARM: dt: tegra: gpio comment cleanup
ARM: dt: tegra: remove unnecessary unit addresses
ARM: dt: tegra: whitespace cleanup
ARM: dt: tegra cardhu: fix typo in SDHCI node name
ARM: dt: tegra: cardhu: register core regulator tps62361
ARM: dt: tegra30.dtsi: Add SMMU node
ARM: dt: tegra20.dtsi: Add GART node
ARM: dt: tegra30.dtsi: Add Memory Controller(MC) nodes
ARM: dt: tegra20.dtsi: Add Memory Controller(MC) nodes
ARM: dt: tegra: Add device tree support for AHB
ARM: dts: enable audio support for imx28-evk
ARM: dts: enable i2c device for imx28-evk
i2c: mxs: add device tree probe support
ARM: dts: enable mmc for imx28-evk
...
|
||
|
Linus Torvalds
|
2795343705 |
arm-soc: clock driver changes
The new clock subsystem was merged in linux-3.4 without any users, this now moves the first three platforms over to it: imx, mxs and spear. The series also contains the changes for the clock subsystem itself, since Mike preferred to have it together with the platforms that require these changes, in order to avoid interdependencies and conflicts. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJPuexPAAoJEIwa5zzehBx3YBsP/0nFhXjb5t1PdLfFzGKtcZVB j4zXWXMHQ1fA7wIfEpZF3Nnco6MQkufF5wJPoPdn1+wmkzCn3D6IwNVWVtW4U5i9 VGyShSbgusAAYXUe/9yYj8eN+bbRQSvdN4eWYWU6+rRXShGZ5dZZmp+IPNl54dnW 6F8uCnHX0cnIMCpGqV+41zZgZ/4wL2k9gdqu0LO6pi07o4tGd0Z4gcySgUFAnn1R kofNHueYIP4UgOg8DREoBzVKlpRqMou3S2kSZUfMeb3Q9ryF7UIvaGqIILyi7PKL kWd3nptg0EPavfL21SwXHiGpnDpB/Gj/F70kcPLus5RYujB24C9bvBmc26z68NZx Sz9mbElkkIU5duZsl1nxBWJ8IZ/tSWdtmC2xQMznmV7gHyGgVwr4j47f4Uv5sBvM 14JHDO7mqN6E6FnTFZu/oPAN5pDjgL+TVNK5BU6Wkq0zitrA6eyKDqCvBCqkO6Nn tNzOuyRDzMOwM7HzqXhxqtzJWXylO1Mldc4bM8X4Cocf4pnLna/X6uP6dgE6A+JY azVYx4I/0NdEPerDTzIcEhBDgZeBVROhUQr+kHxc4rf6WzUUbu/wEo1UKXWV66oW 1jb1yAFFWqYjkQuQc2PD4JSx35sFJaoSaoneRtmzBzRDfzSr5KjKj1E0e1skyMFq 7ZVLCqZD0cB9DhmMDkWP =rwFF -----END PGP SIGNATURE----- Merge tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull arm-soc clock driver changes from Olof Johansson: "The new clock subsystem was merged in linux-3.4 without any users, this now moves the first three platforms over to it: imx, mxs and spear. The series also contains the changes for the clock subsystem itself, since Mike preferred to have it together with the platforms that require these changes, in order to avoid interdependencies and conflicts." Fix up trivial conflicts in arch/arm/mach-kirkwood/common.c (code removed in one branch, added OF support in another) and drivers/dma/imx-sdma.c (independent changes next to each other). * tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits) clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate(). clk: Provide dummy clk_unregister() SPEAr: Update defconfigs SPEAr: Add SMI NOR partition info in dts files SPEAr: Switch to common clock framework SPEAr: Call clk_prepare() before calling clk_enable SPEAr: clk: Add General Purpose Timer Synthesizer clock SPEAr: clk: Add Fractional Synthesizer clock SPEAr: clk: Add Auxiliary Synthesizer clock SPEAr: clk: Add VCO-PLL Synthesizer clock SPEAr: Add DT bindings for SPEAr's timer ARM i.MX: remove now unused clock files ARM: i.MX6: implement clocks using common clock framework ARM i.MX35: implement clocks using common clock framework ARM i.MX5: implement clocks using common clock framework ARM: Kirkwood: Replace clock gating ARM: Orion: Audio: Add clk/clkdev support ARM: Orion: PCIE: Add support for clk ARM: Orion: XOR: Add support for clk ARM: Orion: CESA: Add support for clk ... |
||
|
Linus Torvalds
|
ce53044c68 |
arm-soc: driver specific updates
These changes are specific to some driver that may be used by multiple boards or socs. The most significant change in here is the move of the samsung iommu code from a platform specific in-kernel interface to the generic iommu subsystem. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJPuevXAAoJEIwa5zzehBx3D8YQAKfoY3TFjJ9KmJgk69/pc7cf Of0rvX+35NezGFljIyRdspz+DsV+vhJravwdVxOagRKvVBOb9qnZIXnl3gkLnTw4 dCVMFMqCwXhBeXlXCzHSeRmt2+4/fmJnr7jr4xh9omOAJ9BZv5ftmKNW4zP5wr1L +9HBwzkxlVisR4NCz2q66YBjsV2dXA3dv2hZxEFkUdQFYJGqZoUXLYHF9yno20i3 knKNXEyAFYFUKHiFVBQJ1tYGmZlaIjw14g+GTqzZay2Pi/HjUXfrPd0VwNkBzZf/ H1N3/cf4GJ2+K/zYqh+H/Xjf/Fjkp1dFNhlUQ7+l5Jwbu7C1B2euvwTO4OaqrfdD 7eqG3+uIKhPO2Z8ZySLFgx4ghybtwgZrAwOjsa+ymTugqPbiWYB/zZR1iWu5DMk/ TnNb6P3ciP+WMpoMFh1kXRc/eCCCHtuQ0rLRxizSX6HIpxWvjYFNLH7L3wS+KtlB 7vsS764d1JFW318bsdBi+V/LWRVXeSWWetTzdzDcM/Syz3ZqfPy7e3Ge6qx0lvYe 5ojgzKwVqpJenZdt91UC16cMXNqDTzmZObz6LOCmVm1mB5kYSgEHYxAQQvuGFjXT 28kGyBQNsBboJGaYh2O/CTsVXnHnaPXrtDDWMDacWNwwPYnnA2L8lUNfAg1DgA1j Z6CO8Knfct01EpQLtybK =hgkg -----END PGP SIGNATURE----- Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull arm-soc driver specific updates from Olof Johansson: "These changes are specific to some driver that may be used by multiple boards or socs. The most significant change in here is the move of the samsung iommu code from a platform specific in-kernel interface to the generic iommu subsystem." Fix up trivial conflicts in arch/arm/mach-exynos/Kconfig * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits) mmc: dt: Consolidate DT bindings iommu/exynos: Add iommu driver for EXYNOS Platforms ARM: davinci: optimize the DMA ISR ARM: davinci: implement DEBUG_LL port choice ARM: tegra: Add SMMU enabler in AHB ARM: tegra: Add Tegra AHB driver Input: pxa27x_keypad add choice to set direct_key_mask Input: pxa27x_keypad direct key may be low active Input: pxa27x_keypad bug fix for direct_key_mask Input: pxa27x_keypad keep clock on as wakeup source ARM: dt: tegra: pinmux changes for USB ULPI ARM: tegra: add USB ULPI PHY reset GPIO to device tree ARM: tegra: don't hard-code USB ULPI PHY reset_gpio ARM: tegra: change pll_p_out4's rate to 24MHz ARM: tegra: fix pclk rate ARM: tegra: reparent sclk to pll_c_out1 ARM: tegra: Add pllc clock init table ARM: dt: tegra cardhu: basic audio support ARM: dt: tegra30.dtsi: Add audio-related nodes ARM: tegra: add AUXDATA required for audio ... |
||
|
Linus Torvalds
|
da89fb165e |
dma-buf updates for 3.5
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQEcBAABAgAGBQJPvzQCAAoJEFErWKtxJpJdpNEIAI1sKDywvfuJK0Ik76ICj1Yt P//4/ZvROmT8w9u/Jw3BAG7K3u7NLtfht6RcrUFqMULjMUUQ/aymlY9uTbwFZ+so WCsVh5tHCULa1oUnAUv8fGMgvGoufD4ZqI/9qbuYLmBtUwPAatul51cEmQyWVvLa lJN8PzJ7whfYqNoXpR4SCp8eHY4iJ3DZFDhypdQfZbTgOTrzsoVIJnTdHUXsiRQQ E3gB2dRvyihzOD/UFac47af5wVUwtvo1N6NdQ5tJxOX9ZhVGdHaxAqF5FTlWpm6F uK100uqFHPbm/TZGtSrGD1ai8L7Hbl//LuzaODjLH9usCiYe6KzSSwf8Alg59Ws= =hsWu -----END PGP SIGNATURE----- Merge tag 'tag-for-linus-3.5' of git://git.linaro.org/people/sumitsemwal/linux-dma-buf Pull dma-buf updates from Sumit Semwal: "Here's the first signed-tag pull request for dma-buf framework. It includes the following key items: - mmap support - vmap support - related documentation updates These are needed by various drivers to allow mmap/vmap of dma-buf shared buffers. Dave Airlie has some prime patches dependent on the vmap pull as well." * tag 'tag-for-linus-3.5' of git://git.linaro.org/people/sumitsemwal/linux-dma-buf: dma-buf: add initial vmap documentation dma-buf: minor documentation fixes. dma-buf: add vmap interface dma-buf: mmap support |
||
|
Linus Torvalds
|
d5adf235ad |
Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dmaengine updates from Vinod Koul:
"Nothing exciting this time, odd fixes in a bunch of drivers"
* 'next' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: at_hdmac: take maxburst from slave configuration
dmaengine: at_hdmac: remove ATC_DEFAULT_CTRLA constant
dmaengine: at_hdmac: remove some at_dma_slave comments
dma: imx-sdma: make channel0 operations atomic
dmaengine: Fixup dmaengine_prep_slave_single() to be actually useful
dmaengine: Use dma_sg_len(sg) instead of sg->length
dmaengine: Use sg_dma_address instead of sg_phys
DMA: PL330: Remove duplicate header file inclusion
dma: imx-sdma: keep the callbacks invoked in the tasklet
dmaengine: dw_dma: add Device Tree probing capability
dmaengine: dw_dmac: Add clk_{un}prepare() support
dma/amba-pl08x: add support for the Nomadik variant
dma/amba-pl08x: check for terminal count status only
|
||
|
Linus Torvalds
|
d484864dd9 |
Merge branch 'for-linus' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping
Pull CMA and ARM DMA-mapping updates from Marek Szyprowski: "These patches contain two major updates for DMA mapping subsystem (mainly for ARM architecture). First one is Contiguous Memory Allocator (CMA) which makes it possible for device drivers to allocate big contiguous chunks of memory after the system has booted. The main difference from the similar frameworks is the fact that CMA allows to transparently reuse the memory region reserved for the big chunk allocation as a system memory, so no memory is wasted when no big chunk is allocated. Once the alloc request is issued, the framework migrates system pages to create space for the required big chunk of physically contiguous memory. For more information one can refer to nice LWN articles: - 'A reworked contiguous memory allocator': http://lwn.net/Articles/447405/ - 'CMA and ARM': http://lwn.net/Articles/450286/ - 'A deep dive into CMA': http://lwn.net/Articles/486301/ - and the following thread with the patches and links to all previous versions: https://lkml.org/lkml/2012/4/3/204 The main client for this new framework is ARM DMA-mapping subsystem. The second part provides a complete redesign in ARM DMA-mapping subsystem. The core implementation has been changed to use common struct dma_map_ops based infrastructure with the recent updates for new dma attributes merged in v3.4-rc2. This allows to use more than one implementation of dma-mapping calls and change/select them on the struct device basis. The first client of this new infractructure is dmabounce implementation which has been completely cut out of the core, common code. The last patch of this redesign update introduces a new, experimental implementation of dma-mapping calls on top of generic IOMMU framework. This lets ARM sub-platform to transparently use IOMMU for DMA-mapping calls if one provides required IOMMU hardware. For more information please refer to the following thread: http://www.spinics.net/lists/arm-kernel/msg175729.html The last patch merges changes from both updates and provides a resolution for the conflicts which cannot be avoided when patches have been applied on the same files (mainly arch/arm/mm/dma-mapping.c)." Acked by Andrew Morton <akpm@linux-foundation.org>: "Yup, this one please. It's had much work, plenty of review and I think even Russell is happy with it." * 'for-linus' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: (28 commits) ARM: dma-mapping: use PMD size for section unmap cma: fix migration mode ARM: integrate CMA with DMA-mapping subsystem X86: integrate CMA with DMA-mapping subsystem drivers: add Contiguous Memory Allocator mm: trigger page reclaim in alloc_contig_range() to stabilise watermarks mm: extract reclaim code from __alloc_pages_direct_reclaim() mm: Serialize access to min_free_kbytes mm: page_isolation: MIGRATE_CMA isolation functions added mm: mmzone: MIGRATE_CMA migration type added mm: page_alloc: change fallbacks array handling mm: page_alloc: introduce alloc_contig_range() mm: compaction: export some of the functions mm: compaction: introduce isolate_freepages_range() mm: compaction: introduce map_pages() mm: compaction: introduce isolate_migratepages_range() mm: page_alloc: remove trailing whitespace ARM: dma-mapping: add support for IOMMU mapper ARM: dma-mapping: use alloc, mmap, free from dma_ops ARM: dma-mapping: remove redundant code and do the cleanup ... Conflicts: arch/x86/include/asm/dma-mapping.h |
||
|
Linus Torvalds
|
be87cfb47c |
Sound updates #2 for 3.5-rc1
This is the second updates for 3.5-rc1. It's mainly for OMAP4 HDMI updates and the device tree updates for OMAP, in addition to a couple of PCM accuray improvement and Realtek ALC269VD codec support. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.18 (GNU/Linux) iQIcBAABAgAGBQJPvz1xAAoJEGwxgFQ9KSmk6eoQAILf1oW24ZoYfN4daJRmM0dj aQP1YqOCio0llgYZEM+VpuEdvRjfopUC00/TGyp/NGzWApJdkxZps6Ia8Dvuw215 CG079u4z6fPqO82IeTkn9GkDkVo+BPkuvW2dz9j9QobkALZ7YNYNVXnNZ10qo8tU JqbNBSgn/bIOJ8nkbu7X1WwecVdZbqgj+xlobi/IidyNqJMkm95NR6OmFGJjyyAO dyA/i8WdMO1V2eypDvVAD7+0oLcJeTilkSj337UJex7SL/KlopBVdTgDqUyhXHtq +2G+2L3jHDjs+38d3DosPik5DRQkGswJWK08jNC5VAE+/SggLSf1aRDWUouJ1zqd 0rpDZs9lB8XD8pt3/AYPVai6Yo+dGBVmoexvru1VnKivQ5R78kG+UV27yfhyjxeu hsr+NEdRNoN56953eZjRWoELh10+iZCH6ARDsAOLV1qRBgAEMe+ayiVdr5k6+12C pmVoBq/54NpDQ7M6FHR1KcgShxQ3mhwWbjmfPbJ36xuCZISRKXVDmt6GYjx0X4W6 /frJqbv9sy/Ap09JQ6YPdUtmGz+Eh09QyfzpoyMq5vZbu4Y0YIzRS18R4YKdXD6g lmQ5tv01Fn3C0IQ1SHMaWiRqi0a2gtmXUEE0s4Pu5Oi9MNP2mFtcWuEivrMbysrL vLWGubKFTRIjmMQ7mtqx =88ho -----END PGP SIGNATURE----- Merge tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound update from Takashi Iwai: "This is the second updates for 3.5-rc1. It's mainly for OMAP4 HDMI updates and the device tree updates for OMAP, in addition to a couple of PCM accuray improvement and Realtek ALC269VD codec support." * tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits) ALSA: hda/realtek - Add new codec support for ALC269VD ALSA: core: group read of pointer, tstamp and jiffies ASoC: OMAP: HDMI: Rename sound card source file ASoC: OMAP: HDMI: Make sound card naming more generic ASoC: OMAP: HDMI: Make build config options more generic ASoC: OMAP: HDMI: Expand capabilities of the HDMI DAI ASoC: OMAP: HDMI: Improve how the display state is verified ASoC: OMAP: HDMI: Expand configuration of hw_params ASoC: OMAP: HDMI: Use the DSS audio interface ASoC: OMAP: HDMI: Create a structure for private data of the CPU DAI ASoC: OMAP: HDMI: Change error values in HDMI CPU DAI ASoC: OMAP: HDMI: Update the platform device names ASoC: omap-abe-twl6040: Introduce driver data for runtime parameters ASoC: omap-abe-twl6040: Move Digital Mic widget into dapm table ASoC: omap-abe-twl6040: Keep only one snd_soc_dai_link structure ASoC: omap-dmic: Add device tree bindings ASoC: omap-mcpdm: Add device tree bindings ASoC: omap-mcbsp: buffer size constraint only applies to playback stream ASoC: omap-mcbsp: Use the common interrupt line if supported by the SoC ASoC: omap-mcbsp: Remove unused FRAME dma_op_mode ... |
||
|
Linus Torvalds
|
4b7eba49c5 |
CRIS changes for 3.5
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) iEYEABECAAYFAk+/R7EACgkQ31LbvUHyf1dp9QCfX9xPFDERRWwvyDAAl9zLONxj K+kAnRNydbw7UglqIYUnreCfNemfMdmg =w9Td -----END PGP SIGNATURE----- Merge tag 'cris-for-linus' of git://jni.nu/cris Pull CRIS changes from Jesper Nilsson: "No major changes here, but fixes some compile errors for CRIS, some small style issues, some documentation and as a bonus nukes a couple of obsolete rtc-files and related code." * tag 'cris-for-linus' of git://jni.nu/cris: cris: Remove old legacy "-traditional" flag from arch-v10/lib/Makefile CRIS: Remove legacy RTC drivers cris/mm/fault.c: Port OOM changes to do_page_fault cris:fix the wrong function declear CRIS: Add _sdata to vmlinux.lds.S cris: posix_types.h, include asm-generic/posix_types.h CRIS: Update documentation cris/arch-v32: cryptocop: Use kzalloc net:removed the unused variable cris:removed the unused variable CRISv32: Correct name of read_mostly section. |
||
|
Linus Torvalds
|
92bf3d0941 |
MMC highlights for 3.5:
Drivers: - at91-mci: This driver will be replaced by atmel-mci in 3.7. - atmel-mci: Add support for old at91-mci hardware. - dw_mmc: Allow multiple controllers; this previously caused corruption. - imxmmc: Remove this driver, replaced by mxcmmc. - mmci: Add device tree support. - omap: Allow multiple controllers. - omap_hsmmc: Auto CMD12, DDR support. - tegra: Support SD 3.0 spec. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJPvtlQAAoJEHNBYZ7TNxYMxr8P/0oKBszCCpvYQVH9F7WxWdcs haXcfvQBshKLTw8GxnJhNOuoMpDO565pLCxtL1NigFzA/nnvDrsGu03Rjy8vmeGT vtuda+T+OVOmHwGx868fHMMtp3OeV0cyE2I9WQe0R1M0IW5YFpOCS3zzuaXofMlA dYK6KJC0RlZnc/Usn4esQhXCBS3dH80ynMfORjNtHl2wDnuvp+k2DD2kB2SFmw0H raieXeqcfGTqK9UYWqYYDvFM1D1FZcaokyYIs4Ut8WQtnKWSCWyMEqy5JjC1xbIr YZs+08uIUEcGBnYAuuB6XDcmWfPInqTiStQ6lX6iO6msY8DNh9n2wjt5V30X9GWx fVT8a27qB7gCf7D/ACRbGq+sgRjCL/2de4UcuH/wZyFu585lohinUqpZM6ODz7wA 7AyfPYixpegbYLrppESgzdWzDUFY5HFyhogI9JUemtI1etIvy/tH1n6+l0388Qmy vYYV91U3ommxw4XgyFI2psJrl5y+XveEdv4q0NuqD5nkVrTDQ3cmp/vXXMfIo7fe YliEQuOwV1DAUsvA+FgNKCTYDtHveKIacHVJtQqJcelUOn6Klxs0xgHvsAXgux8U ZDLmAPrrg7O+YmDGsHC0lU8joaXQmtfauqVGm+JSSoQv4iSNI+SqwGaSTlzRURd5 12htXRTx0TTINOAs7vLH =rjPa -----END PGP SIGNATURE----- Merge tag 'mmc-merge-for-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC changes from Chris Ball - at91-mci: This driver will be replaced by atmel-mci in 3.7. - atmel-mci: Add support for old at91-mci hardware. - dw_mmc: Allow multiple controllers; this previously caused corruption. - imxmmc: Remove this driver, replaced by mxcmmc. - mmci: Add device tree support. - omap: Allow multiple controllers. - omap_hsmmc: Auto CMD12, DDR support. - tegra: Support SD 3.0 spec. Fix up the usual trivial conflicts in feature-removal-schedule.txt * tag 'mmc-merge-for-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (38 commits) mmc: at91-mci: this driver is now deprecated mmc: omap_hsmmc: pass IRQF_ONESHOT to request_threaded_irq mmc: block: Allow disabling 512B sector size emulation mmc: atmel-mci: add debug logs mmc: atmel-mci: add support for version lower than v2xx mmc: atmel-mci: change the state machine for compatibility with old IP mmc: atmel-mci: the r/w proof capability lack was not well managed mmc: dw_mmc: Fixed sdio interrupt mask bit setting bug mmc: omap: convert to module_platform_driver mmc: omap: make it behave well as a module mmc: omap: convert to per instance workqueue mmc: core: Remove dead code mmc: card: Avoid null pointer dereference mmc: core: Prevent eMMC VCC supply to be cut from late init mmc: dw_mmc: make multiple instances of dw_mci_card_workqueue mmc: queue: remove redundant memsets mmc: queue: rename mmc_request function mmc: core: skip card initialization if power class selection fails mmc: core: fix the signaling 1.8V for HS200 mmc: core: fix the decision of HS200/DDR card-type ... |
||
|
Linus Torvalds
|
ece78b7df7 |
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull ext2, ext3 and quota fixes from Jan Kara:
"Interesting bits are:
- removal of a special i_mutex locking subclass (I_MUTEX_QUOTA) since
quota code does not need i_mutex anymore in any unusual way.
- backport (from ext4) of a fix of a checkpointing bug (missing cache
flush) that could lead to fs corruption on power failure
The rest are just random small fixes & cleanups."
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext2: trivial fix to comment for ext2_free_blocks
ext2: remove the redundant comment for ext2_export_ops
ext3: return 32/64-bit dir name hash according to usage type
quota: Get rid of nested I_MUTEX_QUOTA locking subclass
quota: Use precomputed value of sb_dqopt in dquot_quota_sync
ext2: Remove i_mutex use from ext2_quota_write()
reiserfs: Remove i_mutex use from reiserfs_quota_write()
ext4: Remove i_mutex use from ext4_quota_write()
ext3: Remove i_mutex use from ext3_quota_write()
quota: Fix double lock in add_dquot_ref() with CONFIG_QUOTA_DEBUG
jbd: Write journal superblock with WRITE_FUA after checkpointing
jbd: protect all log tail updates with j_checkpoint_mutex
jbd: Split updating of journal superblock and marking journal empty
ext2: do not register write_super within VFS
ext2: Remove s_dirt handling
ext2: write superblock only once on unmount
ext3: update documentation with barrier=1 default
ext3: remove max_debt in find_group_orlov()
jbd: Refine commit writeout logic
|
||
Stefan Hajnoczi
|
21848d08be |
doc: ext3: update documentation with barrier=1 default
Commit
|
||
Marcos Paulo de Souza
|
76dab97cd8 |
Documentation/initrd.txt: Change the location of util-linux
The address of util-linux seems deprecated. The new util-linux location is in the kernel.org. So, change this for the correct address. Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Acked-by: Rob Landley <rob@landley.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz> |
||
Michel Machado
|
e52d2e1f25 |
Documentation/SubmittingPatches: suggested the use of scripts/get_maintainer.pl
Had I found a reference to scripts/get_maintainer.pl when I first read Documentation/SubmittingPatches, it would've saved me some time. Signed-off-by: Michel Machado <michel@digirati.com.br> Acked-by: Rob Landley <rob@landley.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz> |
||
Sebastian Andrzej Siewior
|
9b170dbd82 |
Documentation/kernel-parameters: remove autotest and mcatest
It has no more users, the last one is gone in "[PATCH] ia64: Kconfig
cleanup" aka ("6fd79ab50b").
mcatest is gone in commit "[PATCH] ia64: SGI SN update"
("c6bacd5010ec").
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Acked-by: Rob Landley <rob@landley.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
||
Dave Airlie
|
b25b086d23 |
dma-buf: add initial vmap documentation
Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> |
||
Daniel Vetter
|
4c78513e45 |
dma-buf: mmap support
Compared to Rob Clark's RFC I've ditched the prepare/finish hooks and corresponding ioctls on the dma_buf file. The major reason for that is that many people seem to be under the impression that this is also for synchronization with outstanding asynchronous processsing. I'm pretty massively opposed to this because: - It boils down reinventing a new rather general-purpose userspace synchronization interface. If we look at things like futexes, this is hard to get right. - Furthermore a lot of kernel code has to interact with this synchronization primitive. This smells a look like the dri1 hw_lock, a horror show I prefer not to reinvent. - Even more fun is that multiple different subsystems would interact here, so we have plenty of opportunities to create funny deadlock scenarios. I think synchronization is a wholesale different problem from data sharing and should be tackled as an orthogonal problem. Now we could demand that prepare/finish may only ensure cache coherency (as Rob intended), but that runs up into the next problem: We not only need mmap support to facilitate sw-only processing nodes in a pipeline (without jumping through hoops by importing the dma_buf into some sw-access only importer), which allows for a nicer ION->dma-buf upgrade path for existing Android userspace. We also need mmap support for existing importing subsystems to support existing userspace libraries. And a loot of these subsystems are expected to export coherent userspace mappings. So prepare/finish can only ever be optional and the exporter /needs/ to support coherent mappings. Given that mmap access is always somewhat fallback-y in nature I've decided to drop this optimization, instead of just making it optional. If we demonstrate a clear need for this, supported by benchmark results, we can always add it in again later as an optional extension. Other differences compared to Rob's RFC is the above mentioned support for mapping a dma-buf through facilities provided by the importer. Which results in mmap support no longer being optional. Note that this dma-buf mmap patch does _not_ support every possible insanity an existing subsystem could pull of with mmap: Because it does not allow to intercept pagefaults and shoot down ptes importing subsystems can't add some magic of their own at these points (e.g. to automatically synchronize with outstanding rendering or set up some special resources). I've done a cursory read through a few mmap implementions of various subsytems and I'm hopeful that we can avoid this (and the complexity it'd bring with it). Additonally I've extended the documentation a bit to explain the hows and whys of this mmap extension. In case we ever want to add support for explicitly cache maneged userspace mmap with a prepare/finish ioctl pair, we could specify that userspace needs to mmap a different part of the dma_buf, e.g. the range starting at dma_buf->size up to dma_buf->size*2. This works because the size of a dma_buf is invariant over it's lifetime. The exporter would obviously need to fall back to coherent mappings for both ranges if a legacy clients maps the coherent range and the architecture cannot suppor conflicting caching policies. Also, this would obviously be optional and userspace needs to be able to fall back to coherent mappings. v2: - Spelling fixes from Rob Clark. - Compile fix for !DMA_BUF from Rob Clark. - Extend commit message to explain how explicitly cache managed mmap support could be added later. - Extend the documentation with implementations notes for exporters that need to manually fake coherency. v3: - dma_buf pointer initialization goof-up noticed by Rebecca Schultz Zavin. Cc: Rob Clark <rob.clark@linaro.org> Cc: Rebecca Schultz Zavin <rebecca@android.com> Acked-by: Rob Clark <rob.clark@linaro.org> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> |
||
Mike Galbraith
|
5307c9556b |
tick: Add tick skew boot option
Let the user decide whether power consumption or jitter is the more important consideration for their machines. Quoting removal commit |
||
|
Linus Torvalds
|
07acfc2a93 |
Merge branch 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM changes from Avi Kivity: "Changes include additional instruction emulation, page-crossing MMIO, faster dirty logging, preventing the watchdog from killing a stopped guest, module autoload, a new MSI ABI, and some minor optimizations and fixes. Outside x86 we have a small s390 and a very large ppc update. Regarding the new (for kvm) rebaseless workflow, some of the patches that were merged before we switch trees had to be rebased, while others are true pulls. In either case the signoffs should be correct now." Fix up trivial conflicts in Documentation/feature-removal-schedule.txt arch/powerpc/kvm/book3s_segment.S and arch/x86/include/asm/kvm_para.h. I suspect the kvm_para.h resolution ends up doing the "do I have cpuid" check effectively twice (it was done differently in two different commits), but better safe than sorry ;) * 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (125 commits) KVM: make asm-generic/kvm_para.h have an ifdef __KERNEL__ block KVM: s390: onereg for timer related registers KVM: s390: epoch difference and TOD programmable field KVM: s390: KVM_GET/SET_ONEREG for s390 KVM: s390: add capability indicating COW support KVM: Fix mmu_reload() clash with nested vmx event injection KVM: MMU: Don't use RCU for lockless shadow walking KVM: VMX: Optimize %ds, %es reload KVM: VMX: Fix %ds/%es clobber KVM: x86 emulator: convert bsf/bsr instructions to emulate_2op_SrcV_nobyte() KVM: VMX: unlike vmcs on fail path KVM: PPC: Emulator: clean up SPR reads and writes KVM: PPC: Emulator: clean up instruction parsing kvm/powerpc: Add new ioctl to retreive server MMU infos kvm/book3s: Make kernel emulated H_PUT_TCE available for "PR" KVM KVM: PPC: bookehv: Fix r8/r13 storing in level exception handler KVM: PPC: Book3S: Enable IRQs during exit handling KVM: PPC: Fix PR KVM on POWER7 bare metal KVM: PPC: Fix stbux emulation KVM: PPC: bookehv: Use lwz/stw instead of PPC_LL/PPC_STL for 32-bit fields ... |
||
|
Linus Torvalds
|
b1bf7d4d1b |
GPIO driver changes for v3.5 merge window
Lots of gpio changes, both to core code and drivers. Changes do touch architecture code to remove the need for separate arm/gpio.h includes in most architectures. Some new drivers are added, and a number of gpio drivers are converted to use irq_domains for gpio inputs used as interrupts. Device tree support has been amended to allow multiple gpio_chips to use the same device tree node. Remaining changes are primarily bug fixes. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJPvpFBAAoJEEFnBt12D9kB50EP/0q2co+Ddlz4DWM07TLMgTw8 eCSi79+oB85RcE+0FlAo/SJu9VlYDKSLT3wMbIyycfJi3cUtOb+hay0j+wxcn4bz G2qXj2Het5rX6hFI2tSCvJfDqMwU0wEygn9a6a/bw3VGSOIVmMTmRswrbbBcFzVu 8xobviN7LANLEZyhd4Ip5YfrcWH9ABmmhZX7ihn1AJubVL47xGo0uds9ZFX1sAKB Zyr80+BeUK7mhZ74UUfQHtS+x24JD62OLM9eaQN0/BBAqBewQJlxhMakPbTGmcuO Vy3CPmZiWw6tdVWgKvxE7cIXLI4YbB2B6w2TRJBBkFAlz4RsO2bFU/ibEv1vg9YE oxAUelMj0INdY4iRT135fDJTIGauWon22Tqd2MVtun4r6fwcL0BgFYN6yCMtEqbx bpYkKTi6tdyE7k2Ph+carCIuw9SwOk/4pm1xCWC0k6YdAnRE0zykCLvAuAabpmzs i/H1jcp/F4KSYldEoDlGYG4lFZiISthxOy9l6/d4GrBj723attrmztolMfrpFLF6 XPTf7HODQFmZ6n7mBIjCg4hoqydAYyKcW7lROc7DKkEXIWOeeeA+EoTytkwPLLz5 CBLoZfDoqUT8xa2vv4MZ/+G9chSDi5vMryqEYi9tXMbVEZW31xqh6hxk0xPMcY13 qVAaRlcz49AQjWq/0vR4 =U6hj -----END PGP SIGNATURE----- Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6 Pull GPIO driver changes from Grant Likely: "Lots of gpio changes, both to core code and drivers. Changes do touch architecture code to remove the need for separate arm/gpio.h includes in most architectures. Some new drivers are added, and a number of gpio drivers are converted to use irq_domains for gpio inputs used as interrupts. Device tree support has been amended to allow multiple gpio_chips to use the same device tree node. Remaining changes are primarily bug fixes." * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6: (33 commits) gpio/generic: initialize basic_mmio_gpio shadow variables properly gpiolib: Remove 'const' from data argument of gpiochip_find() gpio/rc5t583: add gpio driver for RICOH PMIC RC5T583 gpiolib: quiet gpiochip_add boot message noise gpio: mpc8xxx: Prevent NULL pointer deref in demux handler gpio/lpc32xx: Add device tree support gpio: Adjust of_xlate API to support multiple GPIO chips gpiolib: Implement devm_gpio_request_one() gpio-mcp23s08: dbg_show: fix pullup configuration display Add support for TCA6424A gpio/omap: (re)fix wakeups on level-triggered GPIOs gpio/omap: fix broken context restore for non-OFF mode transitions gpio/omap: fix missing check in *_runtime_suspend() gpio/omap: remove cpu_is_omapxxxx() checks from *_runtime_resume() gpio/omap: remove suspend/resume callbacks gpio/omap: remove retrigger variable in gpio_irq_handler gpio/omap: remove saved_wakeup field from struct gpio_bank gpio/omap: remove suspend_wakeup field from struct gpio_bank gpio/omap: remove saved_fallingdetect, saved_risingdetect gpio/omap: remove virtual_irq_start variable ... Conflicts: drivers/gpio/gpio-samsung.c |
||
|
Linus Torvalds
|
0708500d49 |
Device tree changes for v3.5 merge window
Mostly documentation updates, but also includes an empty stub for non-CONFIG_OF builds. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJPvoQ5AAoJEEFnBt12D9kBuwoP/idxZjNqsrr/z52EiSmBdvcQ Nyh1pJXH5sRKekpYhpiDNYNf5ylz3SC/Lmo3Wf8hb9awlSFnqzD9+0d3VZ91jaEO NVGsiPCLUMs4zQZgrJ3uJqr9XvaFI+3A+zScI/bduJVDMVRYCGhNjefiw0cBBfG9 OHD1TSzwU09Lnormq/gIpBJrVvm6Io0Vhz3lSiyU7I0SBB68lmDWxPIPiaqK00oV +ac0ew2fDTWm4uZR32MvdKX2wUalYwZthm7Okw7NgQ24bCGem2V0dEXT2alynNPY 2w05aAZ8F/9AxPxquRZesoLwoThFYBntG1WWsH0aFp+EbaLz88ZT3YdOO+b8lNF2 mGPgi1V2iyxwX21X43a001u3yPIuYt34X3QQosk9DnGNNnLcMuherPBtaJTGw8d0 cqSzXUTf4W+kk06O2gav8KEg93t4BHIgyah+Zd2buOrZ5xdFc+Gg1qsTFY5XKJ1A NvdBMtqR1/rfMQYbFsQugVdmdUKaJnsIvJAgdpLp4z9De7175liURwr+zOkMWj2z RLLbkvvokolUrlaitoZVjkXGn45gj8kLCV8frH/t511O8XBAS0RDL0NKeTWc0UGh HnCsuSn+0jPpBohKwGNvrlK5mZKDBeXor2dMxslWnDz50L04NlfAj0zuVTBHSL6O TmSYezKb9/auktRLfgRf =acqX -----END PGP SIGNATURE----- Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux-2.6 Pull device tree changes from Grant Likely: "Mostly documentation updates, but also includes an empty stub for non-CONFIG_OF builds." * tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux-2.6: dt/documentation: Fix value format description dt: add vendor prefix for EM Microelectronics ARM: DT: Add binding for GIC virtualization extentions (VGIC) of/irq: add empty irq_of_parse_and_map() for non-dt builds |
||
Joe Perches
|
f0d1b3c2bc |
net/wanrouter: Deprecate and schedule for removal
No one uses this on current kernels anymore. Let it be known it's going to be removed eventually. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Linus Torvalds
|
f2fde3a65e |
Merge branch 'drm-core-next' of git://people.freedesktop.org/~airlied/linux
Pull main drm updates from Dave Airlie:
"This is the main merge window request for the drm.
It's big, but jam packed will lots of features and of course 0
regressions. (okay maybe there'll be one).
Highlights:
- new KMS drivers for server GPU chipsets: ast, mgag200 and cirrus
(qemu only). These drivers use the generic modesetting drivers.
- initial prime/dma-buf support for i915, nouveau, radeon, udl and
exynos
- switcheroo audio support: so GPUs with HDMI can turn off the sound
driver without crashing stuff.
- There are some patches drifting outside drivers/gpu into x86 and
EFI for better handling of multiple video adapters in Apple Macs,
they've got correct acks except one trivial fixup.
- Core:
edid parser has better DMT and reduced blanking support,
crtc properties,
plane properties,
- Drivers:
exynos: add 2D core accel support, prime support, hdmi features
intel: more Haswell support, initial Valleyview support, more
hdmi infoframe fixes, update MAINTAINERS for Daniel, lots of
cleanups and fixes
radeon: more HDMI audio support, improved GPU lockup recovery
support, remove nested mutexes, less memory copying on PCIE, fix
bus master enable race (kexec), improved fence handling
gma500: cleanups, 1080p support, acpi fixes
nouveau: better nva3 memory reclocking, kepler accel (needs
external firmware rip), async buffer moves on nv84+ hw.
I've some more dma-buf patches that rely on the dma-buf merge for vmap
stuff, and I've a few fixes building up, but I'd decided I'd better
get rid of the main pull sooner rather than later, so the audio guys
are also unblocked."
Fix up trivial conflict due to some duplicated changes in
drivers/gpu/drm/i915/intel_ringbuffer.c
* 'drm-core-next' of git://people.freedesktop.org/~airlied/linux: (605 commits)
drm/nouveau/nvd9: Fix GPIO initialisation sequence.
drm/nouveau: Unregister switcheroo client on exit
drm/nouveau: Check dsm on switcheroo unregister
drm/nouveau: fix a minor annoyance in an output string
drm/nouveau: turn a BUG into a WARN
drm/nv50: decode PGRAPH DATA_ERROR = 0x24
drm/nouveau/disp: fix dithering not being enabled on some eDP macbooks
drm/nvd9/copy: initialise copy engine, seems to work like nvc0
drm/nvc0/ttm: use copy engines for async buffer moves
drm/nva3/ttm: use copy engine for async buffer moves
drm/nv98/ttm: add in a (disabled) crypto engine buffer copy method
drm/nv84/ttm: use crypto engine for async buffer copies
drm/nouveau/ttm: untangle code to support accelerated buffer moves
drm/nouveau/fbcon: use fence for sync, rather than notifier
drm/nv98/crypt: non-stub implementation of the engine hooks
drm/nouveau/fifo: turn all fifo modules into engine modules
drm/nv50/graph: remove ability to do interrupt-driven context switching
drm/nv50: remove manual context unload on context destruction
drm/nv50: remove execution engine context saves on suspend
drm/nv50/fifo: use hardware channel kickoff functionality
...
|
||
|
Linus Torvalds
|
28f3d71761 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull more networking updates from David Miller: "Ok, everything from here on out will be bug fixes." 1) One final sync of wireless and bluetooth stuff from John Linville. These changes have all been in his tree for more than a week, and therefore have had the necessary -next exposure. John was just away on a trip and didn't have a change to send the pull request until a day or two ago. 2) Put back some defines in user exposed header file areas that were removed during the tokenring purge. From Stephen Hemminger and Paul Gortmaker. 3) A bug fix for UDP hash table allocation got lost in the pile due to one of those "you got it.. no I've got it.." situations. :-) From Tim Bird. 4) SKB coalescing in TCP needs to have stricter checks, otherwise we'll try to coalesce overlapping frags and crash. Fix from Eric Dumazet. 5) RCU routing table lookups can race with free_fib_info(), causing crashes when we deref the device pointers in the route. Fix by releasing the net device in the RCU callback. From Yanmin Zhang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (293 commits) tcp: take care of overlaps in tcp_try_coalesce() ipv4: fix the rcu race between free_fib_info and ip_route_output_slow mm: add a low limit to alloc_large_system_hash ipx: restore token ring define to include/linux/ipx.h if: restore token ring ARP type to header xen: do not disable netfront in dom0 phy/micrel: Fix ID of KSZ9021 mISDN: Add X-Tensions USB ISDN TA XC-525 gianfar:don't add FCB length to hard_header_len Bluetooth: Report proper error number in disconnection Bluetooth: Create flags for bt_sk() Bluetooth: report the right security level in getsockopt Bluetooth: Lock the L2CAP channel when sending Bluetooth: Restore locking semantics when looking up L2CAP channels Bluetooth: Fix a redundant and problematic incoming MTU check Bluetooth: Add support for Foxconn/Hon Hai AR5BBU22 0489:E03C Bluetooth: Fix EIR data generation for mgmt_device_found Bluetooth: Fix Inquiry with RSSI event mask Bluetooth: improve readability of l2cap_seq_list code Bluetooth: Fix skb length calculation ... |
||
|
Linus Torvalds
|
654443e20d |
Merge branch 'perf-uprobes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull user-space probe instrumentation from Ingo Molnar: "The uprobes code originates from SystemTap and has been used for years in Fedora and RHEL kernels. This version is much rewritten, reviews from PeterZ, Oleg and myself shaped the end result. This tree includes uprobes support in 'perf probe' - but SystemTap (and other tools) can take advantage of user probe points as well. Sample usage of uprobes via perf, for example to profile malloc() calls without modifying user-space binaries. First boot a new kernel with CONFIG_UPROBE_EVENT=y enabled. If you don't know which function you want to probe you can pick one from 'perf top' or can get a list all functions that can be probed within libc (binaries can be specified as well): $ perf probe -F -x /lib/libc.so.6 To probe libc's malloc(): $ perf probe -x /lib64/libc.so.6 malloc Added new event: probe_libc:malloc (on 0x7eac0) You can now use it in all perf tools, such as: perf record -e probe_libc:malloc -aR sleep 1 Make use of it to create a call graph (as the flat profile is going to look very boring): $ perf record -e probe_libc:malloc -gR make [ perf record: Woken up 173 times to write data ] [ perf record: Captured and wrote 44.190 MB perf.data (~1930712 $ perf report | less 32.03% git libc-2.15.so [.] malloc | --- malloc 29.49% cc1 libc-2.15.so [.] malloc | --- malloc | |--0.95%-- 0x208eb1000000000 | |--0.63%-- htab_traverse_noresize 11.04% as libc-2.15.so [.] malloc | --- malloc | 7.15% ld libc-2.15.so [.] malloc | --- malloc | 5.07% sh libc-2.15.so [.] malloc | --- malloc | 4.99% python-config libc-2.15.so [.] malloc | --- malloc | 4.54% make libc-2.15.so [.] malloc | --- malloc | |--7.34%-- glob | | | |--93.18%-- 0x41588f | | | --6.82%-- glob | 0x41588f ... Or: $ perf report -g flat | less # Overhead Command Shared Object Symbol # ........ ............. ............. .......... # 32.03% git libc-2.15.so [.] malloc 27.19% malloc 29.49% cc1 libc-2.15.so [.] malloc 24.77% malloc 11.04% as libc-2.15.so [.] malloc 11.02% malloc 7.15% ld libc-2.15.so [.] malloc 6.57% malloc ... The core uprobes design is fairly straightforward: uprobes probe points register themselves at (inode:offset) addresses of libraries/binaries, after which all existing (or new) vmas that map that address will have a software breakpoint injected at that address. vmas are COW-ed to preserve original content. The probe points are kept in an rbtree. If user-space executes the probed inode:offset instruction address then an event is generated which can be recovered from the regular perf event channels and mmap-ed ring-buffer. Multiple probes at the same address are supported, they create a dynamic callback list of event consumers. The basic model is further complicated by the XOL speedup: the original instruction that is probed is copied (in an architecture specific fashion) and executed out of line when the probe triggers. The XOL area is a single vma per process, with a fixed number of entries (which limits probe execution parallelism). The API: uprobes are installed/removed via /sys/kernel/debug/tracing/uprobe_events, the API is integrated to align with the kprobes interface as much as possible, but is separate to it. Injecting a probe point is privileged operation, which can be relaxed by setting perf_paranoid to -1. You can use multiple probes as well and mix them with kprobes and regular PMU events or tracepoints, when instrumenting a task." Fix up trivial conflicts in mm/memory.c due to previous cleanup of unmap_single_vma(). * 'perf-uprobes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) perf probe: Detect probe target when m/x options are absent perf probe: Provide perf interface for uprobes tracing: Fix kconfig warning due to a typo tracing: Provide trace events interface for uprobes tracing: Extract out common code for kprobes/uprobes trace events tracing: Modify is_delete, is_return from int to bool uprobes/core: Decrement uprobe count before the pages are unmapped uprobes/core: Make background page replacement logic account for rss_stat counters uprobes/core: Optimize probe hits with the help of a counter uprobes/core: Allocate XOL slots for uprobes use uprobes/core: Handle breakpoint and singlestep exceptions uprobes/core: Rename bkpt to swbp uprobes/core: Make order of function parameters consistent across functions uprobes/core: Make macro names consistent uprobes: Update copyright notices uprobes/core: Move insn to arch specific structure uprobes/core: Remove uprobe_opcode_sz uprobes/core: Make instruction tables volatile uprobes: Move to kernel/events/ uprobes/core: Clean up, refactor and improve the code ... |
||
|
Linus Torvalds
|
2c01e7bc46 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input layer updates from Dmitry Torokhov: - a bunch of new drivers (DA9052/53 touchscreenn controller, Synaptics Navpoint, LM8333 keypads, Wacom I2C touhscreen); - updates to existing touchpad drivers (ALPS, Sntelic); - Wacom driver now supports Intuos5; - device-tree bindings in numerous drivers; - other cleanups and fixes. Fix annoying conflict in drivers/input/tablet/wacom_wac.c that I think implies that the input layer device naming is broken, but let's see. I brough it up with Dmitry. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits) Input: matrix-keymap - fix building keymaps Input: spear-keyboard - document DT bindings Input: spear-keyboard - add device tree bindings Input: matrix-keymap - wire up device tree support Input: matrix-keymap - uninline and prepare for device tree support Input: adp5588 - add support for gpio names Input: omap-keypad - dynamically handle register offsets Input: synaptics - fix compile warning MAINTAINERS: adjust input-related patterns Input: ALPS - switch to using input_mt_report_finger_count Input: ALPS - add semi-MT support for v4 protocol Input: Add Synaptics NavPoint (PXA27x SSP/SPI) driver Input: atmel_mxt_ts - dump each message on just 1 line Input: atmel_mxt_ts - do not read extra (checksum) byte Input: atmel_mxt_ts - verify object size in mxt_write_object Input: atmel_mxt_ts - only allow root to update firmware Input: atmel_mxt_ts - use CONFIG_PM_SLEEP Input: sentelic - report device's production serial number Input: tl6040-vibra - Device Tree support Input: evdev - properly handle read/write with count 0 ... |
||
|
Linus Torvalds
|
ab11ca34ee |
Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab: - some V4L2 API updates needed by embedded devices - DVB API extensions for ATSC-MH delivery system, used in US for mobile TV - new tuners for fc0011/0012/0013 and tua9001 - a new dvb driver for af9033/9035 - a new ATSC-MH frontend (lg2160) - new remote controller keymaps - Removal of a few legacy webcam driver that got replaced by gspca on several kernel versions ago - a new driver for Exynos 4/5 webcams(s5pp fimc-lite) - a new webcam sensor driver (smiapp) - a new video input driver for embedded (sta2x1xx) - several improvements, fixes, cleanups, etc inside the drivers. Manually fix up conflicts due to err() -> dev_err() conversion in drivers/staging/media/easycap/easycap_main.c * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (484 commits) [media] saa7134-cards: Remove a PCI entry added by mistake [media] radio-sf16fmi: add support for SF16-FMD [media] rc-loopback: remove duplicate line [media] patch for Asus My Cinema PS3-100 (1043:48cd) [media] au0828: Move the Kconfig knob under V4L_USB_DRIVERS [media] em28xx: simple comment fix [media] [resend] radio-sf16fmr2: add PnP support for SF16-FMD2 [media] smiapp: Use v4l2_ctrl_new_int_menu() instead of v4l2_ctrl_new_custom() [media] smiapp: Add support for 8-bit uncompressed formats [media] smiapp: Allow generic quirk registers [media] smiapp: Use non-binning limits if the binning limit is zero [media] smiapp: Initialise rval in smiapp_read_nvm() [media] smiapp: Round minimum pre_pll up rather than down in ip_clk_freq check [media] smiapp: Use 8-bit reads only before identifying the sensor [media] smiapp: Quirk for sensors that only do 8-bit reads [media] smiapp: Pass struct sensor to register writing commands instead of i2c_client [media] smiapp: Allow using external clock from the clock framework [media] zl10353: change .read_snr() to report SNR as a 0.1 dB [media] media: add support to gspca/pac7302.c for 093a:2627 (Genius FaceCam 300) [media] m88rs2000 - only flip bit 2 on reg 0x70 on 16th try ... |
||
|
Linus Torvalds
|
d5b4bb4d10 |
Merge branch 'delete-mca' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
Pull the MCA deletion branch from Paul Gortmaker:
"It was good that we could support MCA machines back in the day, but
realistically, nobody is using them anymore. They were mostly limited
to 386-sx 16MHz CPU and some 486 class machines and never more than
64MB of RAM. Even the enthusiast hobbyist community seems to have
dried up close to ten years ago, based on what you can find searching
various websites dedicated to the relatively short lived hardware.
So lets remove the support relating to CONFIG_MCA. There is no point
carrying this forward, wasting cycles doing routine maintenance on it;
wasting allyesconfig build time on validating it, wasting I/O on git
grep'ping over it, and so on."
Let's see if anybody screams. It generally has compiled, and James
Bottomley pointed out that there was a MCA extension from NCR that
allowed for up to 4GB of memory and PPro-class machines. So in *theory*
there may be users out there.
But even James (technically listed as a maintainer) doesn't actually
have a system, and while Alan Cox claims to have a machine in his cellar
that he offered to anybody who wants to take it off his hands, he didn't
argue for keeping MCA support either.
So we could bring it back. But somebody had better speak up and talk
about how they have actually been using said MCA hardware with modern
kernels for us to do that. And David already took the patch to delete
all the networking driver code (commit
|
||
|
Linus Torvalds
|
0b87da68a0 |
Merge git://www.linux-watchdog.org/linux-watchdog
Pull first set of watchdog updates from Wim Van Sebroeck: "This pull contains: - The removal of ixp2000_wdt - The addition of ie6xx_wdt - Some documentation fixes - Small fixes and improvements (Note: Part 2 will contain generic watchdog core changes + conversion of some more drivers)" * git://www.linux-watchdog.org/linux-watchdog: Documentation/watchdog: Fix the file descriptor leak when no cmdline arg given Documentation/watchdog: close the fd when cmdline arg given Documentation/watchdog: Fix a small typo watchdog: s3c2410_wdt: Set timeout to actually achieved timeout watchdog: wm831x: Convert to gpio_request_one() watchdog: via_wdt: depends on PCI watchdog: ie6xx_wdt needs io.h watchdog: ie6xx_wdt.c: fix printk format warning watchdog: Add watchdog driver for Intel Atom E6XX watchdog: it87_wdt: Add support for IT8728F watchdog. watchdog: i6300esb: don't depend on X86 watchdog: Use module_pci_driver watchdog: sch311x_wdt.c: Remove RESGEN watchdog: s3c2410-wdt: Use of_match_ptr(). watchdog: Device tree support for pnx4008-wdt watchdog: ar7_wdt.c: use devm_request_and_ioremap watchdog: remove ixp2000 driver watchdog: sp5100_tco.c: quiet sparse noise about using plain integer was NULL pointer |
||
|
Linus Torvalds
|
1259f6ee15 |
hwmon updates for 3.5-rc1
New driver for INA219 and INA226, added support for IT8782F and IT8783E/F to
it87 driver, plus cleanups in a couple of drivers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=ZX6H
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New driver for INA219 and INA226, added support for IT8782F and
IT8783E/F to it87 driver, plus cleanups in a couple of drivers."
* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (it87) Make temp3 attribute conditional for IT8782F
hwmon: (it87) Convert to use devm_kzalloc and devm_request_region
hwmon: INA219 and INA226 support
hwmon: (it87) Create voltage attributes only if voltage is enabled
hwmon: (ntc_thermistor) Fix checkpatch warning
hwmon: (ntc_thermistor) Optimize and fix build warning
hwmon: (ntc_thermistor) Return error code from hwmon_device_register
hwmon: (ntc_thermistor) Convert to devm_kzalloc
hwmon: (ad7314) Remove unused defines, and rename OFFSET to SHIFT
acpi_power_meter: clean up code around setup_attrs
acpi_power_meter: drop meter_rw_attrs, use common meter_attrs
acpi_power_meter: remove duplicate code between register_{ro,rw}_attrs
acpi_power_meter: use a {RW,RO}_SENSOR_TEMPLATE macro to clean things up
acpi_power_meter: use the same struct {rw,ro}_sensor_template for both
hwmon: use module_pci_driver
hwmon: (it87) Add support for IT8782F and IT8783E/F
|
||
|
Linus Torvalds
|
468f4d1a85 |
Power management updates for 3.5
* Implementation of opportunistic suspend (autosleep) and user space interface for manipulating wakeup sources. * Hibernate updates from Bojan Smojver and Minho Ban. * Updates of the runtime PM core and generic PM domains framework related to PM QoS. * Assorted fixes. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.18 (GNU/Linux) iQIcBAABAgAGBQJPu+jwAAoJEKhOf7ml8uNsOw0P/0w1FqXD64a1laE43JIlBe9w yHEcLHc9MXN+8lS0XQ6jFiL/VC3U5Sj7Ro+DFKcL2MWX//dfDcZcwA9ep/qh4tHV tJ987IijdWqJV14pde3xQafhp/9i12rArLxns7S5fzkdfVk0iDjhZZaZy4afFJYM SuCsDhCwWefZh89+oLikByiFPnhW+f2ZC9YQeokBM/XvZLtxmOiVfL6duloT/Cr+ 58jkrJ8xz/5kmmN4bXM4Wlpf9ZIYFXbvtbKrq3GZOXc+LpNKlWQyFgg/pIuxBewC uSgsNXXV0LFDi5JfER/8l9MMLtJwwc4VHzpLvMnRv+GtwO2/FKIIr9Fcv000IL2N 0/Ppr52M7XpRruM/k+YroUQ4F1oBX6HB4e3rwqC+XG6n5bwn/Jc7kdy7aUojqNLG Nlr5f0vBjLTSF66Jnel71Bn+gbA1ogER7E+esSTMpyX+RgGJAUVt5oX9IjbXl3PI bk8xW1csSRxBI2NkFOd9EM3vMzdGc5uu+iOoy7iBvcAK0AEfo2Ml9YuSVFQeqAu0 A96MUW155A+GKMC7I/LK8pTgMvYDedWhVW9uyXpMRjwdFC5/ywZU1aM00tL9HMpG pzHOFJgsYrf/6VCV8BwqgudRYd0K5EPSGeITCg973os/XzJIOCfJuy+Pn5V/F0ew lTbi8ipQD0Hh8A/Xt0QB =Q2vo -----END PGP SIGNATURE----- Merge tag 'pm-for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: - Implementation of opportunistic suspend (autosleep) and user space interface for manipulating wakeup sources. - Hibernate updates from Bojan Smojver and Minho Ban. - Updates of the runtime PM core and generic PM domains framework related to PM QoS. - Assorted fixes. * tag 'pm-for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (25 commits) epoll: Fix user space breakage related to EPOLLWAKEUP PM / Domains: Make it possible to add devices to inactive domains PM / Hibernate: Use get_gendisk to verify partition if resume_file is integer format PM / Domains: Fix computation of maximum domain off time PM / Domains: Fix link checking when add subdomain PM / Sleep: User space wakeup sources garbage collector Kconfig option PM / Sleep: Make the limit of user space wakeup sources configurable PM / Documentation: suspend-and-cpuhotplug.txt: Fix typo PM / Domains: Cache device stop and domain power off governor results, v3 PM / Domains: Make device removal more straightforward PM / Sleep: Fix a mistake in a conditional in autosleep_store() epoll: Add a flag, EPOLLWAKEUP, to prevent suspend while epoll events are ready PM / QoS: Create device constraints objects on notifier registration PM / Runtime: Remove device fields related to suspend time, v2 PM / Domains: Rework default domain power off governor function, v2 PM / Domains: Rework default device stop governor function, v2 PM / Sleep: Add user space interface for manipulating wakeup sources, v3 PM / Sleep: Add "prevent autosleep time" statistics to wakeup sources PM / Sleep: Implement opportunistic sleep, v2 PM / Sleep: Add wakeup_source_activate and wakeup_source_deactivate tracepoints ... |
||
|
Linus Torvalds
|
2e341ca686 |
Sound updates for 3.5-rc1
This is the first big chunk for 3.5 merges of sound stuff.
There are a few big changes in different areas. First off, the
streaming logic of USB-audio endpoints has been largely rewritten
for the better support of "implicit feedback". If anything about USB
got broken, this change has to be checked.
For HD-audio, the resume procedure was changed; instead of delaying
the resume of the hardware until the first use, now waking up immediately
at resume. This is for buggy BIOS.
For ASoC, dynamic PCM support and the improved support for digital links
between off-SoC devices are major framework changes.
Some highlights are below:
* HD-audio
- Avoid the accesses of invalid pin-control bits that may stall the codec
- V-ref setup cleanups
- Fix the races in power-saving code
- Fix the races in codec cache hashes and connection lists
- Split some common codes for BIOS auto-parser to hda_auto_parser.c
- Changed the PM resume code to wake up immediately for buggy BIOS
- Creative SoundCore3D support
- Add Conexant CX20751/2/3/4 codec support
* ASoC
- Dynamic PCM support, allowing support for SoCs with internal routing
through components with tight sequencing and formatting constraints
within their internal paths or where there are multiple components
connected with CPU managed DMA controllers inside the SoC.
- Greatly improved support for direct digital links between off-SoC
devices, providing a much simpler way of connecting things like digital
basebands to CODECs.
- Much more fine grained and robust locking, cleaning up some of the
confusion that crept in with multi-component.
- CPU support for nVidia Tegra 30 I2S and audio hub controllers and
ST-Ericsson MSP I2S controolers
- New CODEC drivers for Cirrus CS42L52, LAPIS Semiconductor ML26124, Texas
Instruments LM49453.
- Some regmap changes needed by the Tegra I2S driver.
- mc13783 audio support.
* Misc
- Rewrite with module_pci_driver()
- Xonar DGX support for snd-oxygen
- Improvement of packet handling in snd-firewire driver
- New USB-endpoint streaming logic
- Enhanced M-audio FTU quirks and relevant cleanups
- Increment the support of OSS devices to 256
- snd-aloop accuracy improvement
There are a few more pending changes for 3.5, but they will be
sent slightly later as partly depending on the changes of DRM.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.18 (GNU/Linux)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=+JSm
-----END PGP SIGNATURE-----
Merge tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This is the first big chunk for 3.5 merges of sound stuff.
There are a few big changes in different areas. First off, the
streaming logic of USB-audio endpoints has been largely rewritten for
the better support of "implicit feedback". If anything about USB got
broken, this change has to be checked.
For HD-audio, the resume procedure was changed; instead of delaying
the resume of the hardware until the first use, now waking up
immediately at resume. This is for buggy BIOS.
For ASoC, dynamic PCM support and the improved support for digital
links between off-SoC devices are major framework changes.
Some highlights are below:
* HD-audio
- Avoid accesses of invalid pin-control bits that may stall the codec
- V-ref setup cleanups
- Fix the races in power-saving code
- Fix the races in codec cache hashes and connection lists
- Split some common codes for BIOS auto-parser to hda_auto_parser.c
- Changed the PM resume code to wake up immediately for buggy BIOS
- Creative SoundCore3D support
- Add Conexant CX20751/2/3/4 codec support
* ASoC
- Dynamic PCM support, allowing support for SoCs with internal
routing through components with tight sequencing and formatting
constraints within their internal paths or where there are multiple
components connected with CPU managed DMA controllers inside the
SoC.
- Greatly improved support for direct digital links between off-SoC
devices, providing a much simpler way of connecting things like
digital basebands to CODECs.
- Much more fine grained and robust locking, cleaning up some of the
confusion that crept in with multi-component.
- CPU support for nVidia Tegra 30 I2S and audio hub controllers and
ST-Ericsson MSP I2S controolers
- New CODEC drivers for Cirrus CS42L52, LAPIS Semiconductor ML26124,
Texas Instruments LM49453.
- Some regmap changes needed by the Tegra I2S driver.
- mc13783 audio support.
* Misc
- Rewrite with module_pci_driver()
- Xonar DGX support for snd-oxygen
- Improvement of packet handling in snd-firewire driver
- New USB-endpoint streaming logic
- Enhanced M-audio FTU quirks and relevant cleanups
- Increment the support of OSS devices to 256
- snd-aloop accuracy improvement
There are a few more pending changes for 3.5, but they will be sent
slightly later as partly depending on the changes of DRM."
Fix up conflicts in regmap (due to duplicate patches, with some further
updates then having already come in from the regmap tree). Also some
fairly trivial context conflicts in the imx and mcx soc drivers.
* tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (280 commits)
ALSA: snd-usb: fix stream info output in /proc
ALSA: pcm - Add proper state checks to snd_pcm_drain()
ALSA: sh: Fix up namespace collision in sh_dac_audio.
ALSA: hda/realtek - Fix unused variable compile warning
ASoC: sh: fsi: enable chip specific data transfer mode
ASoC: sh: fsi: call fsi_hw_startup/shutdown from fsi_dai_trigger()
ASoC: sh: fsi: use same format for IN/OUT
ASoC: sh: fsi: add fsi_version() and removed meaningless version check
ASoC: sh: fsi: use register field macro name on IN/OUT_DMAC
ASoC: tegra: Add machine driver for WM8753 codec
ALSA: hda - Fix possible races of accesses to connection list array
ASoC: OMAP: HDMI: Introduce codec
ARM: mx31_3ds: Add sound support
ASoC: imx-mc13783 cleanup
mx31moboard: Add sound support
ASoC: mc13783 codec cleanups
ASoC: add imx-mc13783 sound support
ASoC: Add mc13783 codec
mfd: mc13xxx: add codec platform data
ASoC: don't flip master of DT-instantiated DAI links
...
|
||
|
Linus Torvalds
|
6f73b3629f |
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc updates from Benjamin Herrenschmidt:
"Here are the powerpc goodies for 3.5. Main highlights are:
- Support for the NX crypto engine in Power7+
- A bunch of Anton goodness, including some micro optimization of our
syscall entry on Power7
- I converted a pile of our thermal control drivers to the new i2c
APIs (essentially turning the old therm_pm72 into a proper set of
windfarm drivers). That's one more step toward removing the
deprecated i2c APIs, there's still a few drivers to fix, but we are
getting close
- kexec/kdump support for 47x embedded cores
The big missing thing here is no updates from Freescale. Not sure
what's up here, but with Kumar not working for them anymore things are
a bit in a state of flux in that area."
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (71 commits)
powerpc: Fix irq distribution
Revert "powerpc/hw-breakpoint: Use generic hw-breakpoint interfaces for new PPC ptrace flags"
powerpc: Fixing a cputhread code documentation
powerpc/crypto: Enable the PFO-based encryption device
powerpc/crypto: Build files for the nx device driver
powerpc/crypto: debugfs routines and docs for the nx device driver
powerpc/crypto: SHA512 hash routines for nx encryption
powerpc/crypto: SHA256 hash routines for nx encryption
powerpc/crypto: AES-XCBC mode routines for nx encryption
powerpc/crypto: AES-GCM mode routines for nx encryption
powerpc/crypto: AES-ECB mode routines for nx encryption
powerpc/crypto: AES-CTR mode routines for nx encryption
powerpc/crypto: AES-CCM mode routines for nx encryption
powerpc/crypto: AES-CBC mode routines for nx encryption
powerpc/crypto: nx driver code supporting nx encryption
powerpc/pseries: Enable the PFO-based RNG accelerator
powerpc/pseries/hwrng: PFO-based hwrng driver
powerpc/pseries: Add PFO support to the VIO bus
powerpc/pseries: Add pseries update notifier for OFDT prop changes
powerpc/pseries: Add new hvcall constants to support PFO
...
|
||
Devendra Naga
|
cad19fa664 |
Documentation/watchdog: Fix the file descriptor leak when no cmdline arg given
we start a infinite loop when user gives ./watchdog-test, and when user ctrl + c's the program, we just exit immeadiately with out closing the filedescriptor of the watchdog device. a signal handler is used to do the job of closing the filedescriptor and exiting the program. Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> |
||
|
Devendra Naga
|
3c2a6186c1 |
Documentation/watchdog: close the fd when cmdline arg given
in the watchdog test code, the ioctl is performed on the watchdog device and just doing exit(0) so we leak a filedescripor. Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> |
||
|
Devendra Naga
|
2deca73655 |
Documentation/watchdog: Fix a small typo
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> |
||
|
Roland Stigge
|
3ba3774b8c |
watchdog: Device tree support for pnx4008-wdt
This patch adds device tree support to pnx4008-wdt.c Signed-off-by: Roland Stigge <stigge@antcom.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> |
||
Robert Love
|
9a74e884ee |
[SCSI] libfcoe: Add fcoe_sysfs
This patch adds a 'fcoe bus' infrastructure to the kernel that is driven by changes to libfcoe which allow LLDs to present FIP (FCoE Initialization Protocol) discovered entities and their attributes to user space via sysfs. This patch adds the following APIs- fcoe_ctlr_device_add fcoe_ctlr_device_delete fcoe_fcf_device_add fcoe_fcf_device_delete They allow the LLD to expose the FCoE ENode Controller and any discovered FCFs (Fibre Channel Forwarders, e.g. FCoE switches) to the user. Each of these new devices has their own bus_type so that they are grouped together for easy lookup from a user space application. Each new class has an attribute_group to expose attributes for any created instances. The attributes are- fcoe_ctlr_device * fcf_dev_loss_tmo * lesb_link_fail * lesb_vlink_fail * lesb_miss_fka * lesb_symb_err * lesb_err_block * lesb_fcs_error fcoe_fcf_device * fabric_name * switch_name * priority * selected * fc_map * vfid * mac * fka_peroid * fabric_state * dev_loss_tmo A device loss infrastructre similar to the FC Transport's is also added by this patch. It is nice to have so that a link flapping adapter doesn't continually advance the count used to identify the discovered FCF. FCFs will exist in a "Disconnected" state until either the timer expires or the FCF is rediscovered and becomes "Connected." This patch generates a few checkpatch.pl WARNINGS that I'm not sure what to do about. They're macros modeled around the FC Transport attribute building macros, which have the same 'feature' where the caller can ommit a cast in the argument list and no cast occurs in the code. I'm not sure how to keep the code condensed while keeping the macros. Any advice would be appreciated. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com> |
||
|
Linus Torvalds
|
e8650a0823 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial updates from Jiri Kosina: "As usual, it's mostly typo fixes, redundant code elimination and some documentation updates." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (57 commits) edac, mips: don't change code that has been removed in edac/mips tree xtensa: Change mail addresses of Hannes Weiner and Oskar Schirmer lib: Change mail address of Oskar Schirmer net: Change mail address of Oskar Schirmer arm/m68k: Change mail address of Sebastian Hess i2c: Change mail address of Oskar Schirmer net: Fix tcp_build_and_update_options comment in struct tcp_sock atomic64_32.h: fix parameter naming mismatch Kconfig: replace "--- help ---" with "---help---" c2port: fix bogus Kconfig "default no" edac: Fix spelling errors. qla1280: Remove redundant NULL check before release_firmware() call remoteproc: remove redundant NULL check before release_firmware() qla2xxx: Remove redundant NULL check before release_firmware() call. aic94xx: Get rid of redundant NULL check before release_firmware() call tehuti: delete redundant NULL check before release_firmware() qlogic: get rid of a redundant test for NULL before call to release_firmware() bna: remove redundant NULL test before release_firmware() tg3: remove redundant NULL test before release_firmware() call typhoon: get rid of redundant conditional before all to release_firmware() ... |
||
|
Linus Torvalds
|
3c2c4b73aa |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID subsystem updates from Jiri Kosina: "Apart from various driver updates and added support for a number of new devices (mostly multitouch ones, but not limited to), there is one change that is worth pointing out explicitly: creation of HID device groups and proper autoloading of hid-multitouch, implemented by Henrik Rydberg." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (50 commits) HID: wacom: fix build breakage without CONFIG_LEDS_CLASS HID: waltop: Extend barrel button fix HID: hyperv: Set the hid drvdata correctly HID: wacom: Unify speed setting HID: wacom: Add speed setting for Intuos4 WL HID: wacom: Move Graphire raport header check. HID: uclogic: Add support for UC-Logic TWHL850 HID: explain the signed/unsigned handling in hid_add_field() HID: handle logical min/max signedness properly in parser HID: logitech: read all 32 bits of report type bitfield HID: wacom: Add LED selector control for Wacom Intuos4 WL HID: hid-multitouch: fix wrong protocol detection HID: wiimote: Fix IR data parser HID: wacom: Add tilt reporting for Intuos4 WL HID: multitouch: MT interface matching for Baanto HID: hid-multitouch: Only match MT interfaces HID: Create a common generic driver HID: hid-multitouch: Switch to device groups HID: Create a generic device group HID: Allow bus wildcard matching ... |
||
|
Linus Torvalds
|
d79ee93de9 |
Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler changes from Ingo Molnar: "The biggest change is the cleanup/simplification of the load-balancer: instead of the current practice of architectures twiddling scheduler internal data structures and providing the scheduler domains in colorfully inconsistent ways, we now have generic scheduler code in kernel/sched/core.c:sched_init_numa() that looks at the architecture's node_distance() parameters and (while not fully trusting it) deducts a NUMA topology from it. This inevitably changes balancing behavior - hopefully for the better. There are various smaller optimizations, cleanups and fixlets as well" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Taint kernel with TAINT_WARN after sleep-in-atomic bug sched: Remove stale power aware scheduling remnants and dysfunctional knobs sched/debug: Fix printing large integers on 32-bit platforms sched/fair: Improve the ->group_imb logic sched/nohz: Fix rq->cpu_load[] calculations sched/numa: Don't scale the imbalance sched/fair: Revert sched-domain iteration breakage sched/x86: Rewrite set_cpu_sibling_map() sched/numa: Fix the new NUMA topology bits sched/numa: Rewrite the CONFIG_NUMA sched domain support sched/fair: Propagate 'struct lb_env' usage into find_busiest_group sched/fair: Add some serialization to the sched_domain load-balance walk sched/fair: Let minimally loaded cpu balance the group sched: Change rq->nr_running to unsigned int x86/numa: Check for nonsensical topologies on real hw as well x86/numa: Hard partition cpu topology masks on node boundaries x86/numa: Allow specifying node_distance() for numa=fake x86/sched: Make mwait_usable() heed to "idle=" kernel parameters properly sched: Update documentation and comments sched_rt: Avoid unnecessary dequeue and enqueue of pushable tasks in set_cpus_allowed_rt() |
||
|
Linus Torvalds
|
88d6ae8dc3 |
Merge branch 'for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo: "cgroup file type addition / removal is updated so that file types are added and removed instead of individual files so that dynamic file type addition / removal can be implemented by cgroup and used by controllers. blkio controller changes which will come through block tree are dependent on this. Other changes include res_counter cleanup and disallowing kthread / PF_THREAD_BOUND threads to be attached to non-root cgroups. There's a reported bug with the file type addition / removal handling which can lead to oops on cgroup umount. The issue is being looked into. It shouldn't cause problems for most setups and isn't a security concern." Fix up trivial conflict in Documentation/feature-removal-schedule.txt * 'for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (21 commits) res_counter: Account max_usage when calling res_counter_charge_nofail() res_counter: Merge res_counter_charge and res_counter_charge_nofail cgroups: disallow attaching kthreadd or PF_THREAD_BOUND threads cgroup: remove cgroup_subsys->populate() cgroup: get rid of populate for memcg cgroup: pass struct mem_cgroup instead of struct cgroup to socket memcg cgroup: make css->refcnt clearing on cgroup removal optional cgroup: use negative bias on css->refcnt to block css_tryget() cgroup: implement cgroup_rm_cftypes() cgroup: introduce struct cfent cgroup: relocate __d_cgrp() and __d_cft() cgroup: remove cgroup_add_file[s]() cgroup: convert memcg controller to the new cftype interface memcg: always create memsw files if CONFIG_CGROUP_MEM_RES_CTLR_SWAP cgroup: convert all non-memcg controllers to the new cftype interface cgroup: relocate cftype and cgroup_subsys definitions in controllers cgroup: merge cft_release_agent cftype array into the base files array cgroup: implement cgroup_add_cftypes() and friends cgroup: build list of all cgroups under a given cgroupfs_root cgroup: move cgroup_clear_directory() call out of cgroup_populate_dir() ... |
||
Takashi Iwai
|
599ed4b0ae | Merge branch 'for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc into topic/asoc | ||
|
Linus Torvalds
|
fb09bafda6 |
Staging tree pull request for 3.5-rc1
Here is the big staging tree pull request for the 3.5-rc1 merge window. Loads of changes here, and we just narrowly added more lines than we added: 622 files changed, 28356 insertions(+), 26059 deletions(-) But, good news is that there is a number of subsystems that moved out of the staging tree, to their respective "real" portions of the kernel. Code that moved out was: - iio core code - mei driver - vme core and bridge drivers There was one broken network driver that moved into staging as a step before it is removed from the tree (pc300), and there was a few new drivers added to the tree: - new iio drivers - gdm72xx wimax USB driver - ipack subsystem and 2 drivers All of the movements around have acks from the various subsystem maintainers, and all of this has been in the linux-next tree for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.18 (GNU/Linux) iEYEABECAAYFAk+7q8MACgkQMUfUDdst+ymjogCguo8fANFVlPWeZGeoBTL+aQfQ yTkAoLE0codmh+2SvhulYgyU1Wh6ZDK2 =nJ2F -----END PGP SIGNATURE----- Merge tag 'staging-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging tree changes from Greg Kroah-Hartman: "Here is the big staging tree pull request for the 3.5-rc1 merge window. Loads of changes here, and we just narrowly added more lines than we added: 622 files changed, 28356 insertions(+), 26059 deletions(-) But, good news is that there is a number of subsystems that moved out of the staging tree, to their respective "real" portions of the kernel. Code that moved out was: - iio core code - mei driver - vme core and bridge drivers There was one broken network driver that moved into staging as a step before it is removed from the tree (pc300), and there was a few new drivers added to the tree: - new iio drivers - gdm72xx wimax USB driver - ipack subsystem and 2 drivers All of the movements around have acks from the various subsystem maintainers, and all of this has been in the linux-next tree for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fixed up various trivial conflicts, along with a non-trivial one found in -next and pointed out by Olof Johanssen: a clean - but incorrect - merge of the arch/arm/boot/dts/at91sam9g20.dtsi file. Fix up manually as per Stephen Rothwell. * tag 'staging-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (536 commits) Staging: bcm: Remove two unused variables from Adapter.h Staging: bcm: Removes the volatile type definition from Adapter.h Staging: bcm: Rename all "INT" to "int" in Adapter.h Staging: bcm: Fix warning: __packed vs. __attribute__((packed)) in Adapter.h Staging: bcm: Correctly format all comments in Adapter.h Staging: bcm: Fix all whitespace issues in Adapter.h Staging: bcm: Properly format braces in Adapter.h Staging: ipack/bridges/tpci200: remove unneeded casts Staging: ipack/bridges/tpci200: remove TPCI200_SHORTNAME constant Staging: ipack: remove board_name and bus_name fields from struct ipack_device Staging: ipack: improve the register of a bus and a device in the bus. staging: comedi: cleanup all the comedi_driver 'detach' functions staging: comedi: remove all 'default N' in Kconfig staging: line6/config.h: Delete unused header staging: gdm72xx depends on NET staging: gdm72xx: Set up parent link in sysfs for gdm72xx devices staging: drm/omap: initial dmabuf/prime import support staging: drm/omap: dmabuf/prime mmap support pstore/ram: Add ECC support pstore/ram: Switch to persistent_ram routines ... |
||
|
Linus Torvalds
|
5d4e2d08e7 |
Driver core pull for 3.5-rc1
Here's the driver core, and other driver subsystems, pull request for
the 3.5-rc1 merge window.
Outside of a few minor driver core changes, we ended up with the
following different subsystem and core changes as well, due to
interdependancies on the driver core:
- hyperv driver updates
- drivers/memory being created and some drivers moved into it
- extcon driver subsystem created out of the old Android staging switch
driver code
- dynamic debug updates
- printk rework, and /dev/kmsg changes
All of this has been tested in the linux-next releases for a few weeks
with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.18 (GNU/Linux)
iEYEABECAAYFAk+7q28ACgkQMUfUDdst+ykXmwCfcPASzC+/bDkuqdWsqzxlWZ7+
VOQAnAriySv397St36J6Hz5bMQZwB1Yq
=SQc+
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg Kroah-Hartman:
"Here's the driver core, and other driver subsystems, pull request for
the 3.5-rc1 merge window.
Outside of a few minor driver core changes, we ended up with the
following different subsystem and core changes as well, due to
interdependancies on the driver core:
- hyperv driver updates
- drivers/memory being created and some drivers moved into it
- extcon driver subsystem created out of the old Android staging
switch driver code
- dynamic debug updates
- printk rework, and /dev/kmsg changes
All of this has been tested in the linux-next releases for a few weeks
with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
Fix up conflicts in drivers/extcon/extcon-max8997.c where git noticed
that a patch to the deleted drivers/misc/max8997-muic.c driver needs to
be applied to this one.
* tag 'driver-core-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (90 commits)
uio_pdrv_genirq: get irq through platform resource if not set otherwise
memory: tegra{20,30}-mc: Remove empty *_remove()
printk() - isolate KERN_CONT users from ordinary complete lines
sysfs: get rid of some lockdep false positives
Drivers: hv: util: Properly handle version negotiations.
Drivers: hv: Get rid of an unnecessary check in vmbus_prep_negotiate_resp()
memory: tegra{20,30}-mc: Use dev_err_ratelimited()
driver core: Add dev_*_ratelimited() family
Driver Core: don't oops with unregistered driver in driver_find_device()
printk() - restore prefix/timestamp printing for multi-newline strings
printk: add stub for prepend_timestamp()
ARM: tegra30: Make MC optional in Kconfig
ARM: tegra20: Make MC optional in Kconfig
ARM: tegra30: MC: Remove unnecessary BUG*()
ARM: tegra20: MC: Remove unnecessary BUG*()
printk: correctly align __log_buf
ARM: tegra30: Add Tegra Memory Controller(MC) driver
ARM: tegra20: Add Tegra Memory Controller(MC) driver
printk() - restore timestamp printing at console output
printk() - do not merge continuation lines of different threads
...
|
||
|
Linus Torvalds
|
fb2123fad3 |
Char/Misc patches for 3.5-rc1
Here are a few various char/misc tree patches for the 3.5-rc1 merge window. Nothing major here at all, just different driver updates and some parport dead code removal. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.18 (GNU/Linux) iEYEABECAAYFAk+7qxoACgkQMUfUDdst+ynz0gCggUMf6y60T1rPVT7h2Ab3iy5k 9d0An0U607GRDK1e5lwbZdGuuRkfBwRi =NpES -----END PGP SIGNATURE----- Merge tag 'char-misc-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull Char/Misc patches from Greg Kroah-Hartman: "Here are a few various char/misc tree patches for the 3.5-rc1 merge window. Nothing major here at all, just different driver updates and some parport dead code removal. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'char-misc-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: parport: remove unused dead code from lowlevel drivers xilinx_hwicap: reset XHI_MAX_RETRIES xilinx_hwicap: add support for virtex6 FPGAs Support M95040 SPI EEPROM misc: add support for bmp18x chips to the bmp085 driver misc: bmp085: add device tree properties misc: clean up bmp085 driver misc: do not mark exported functions __devexit misc: add missing __devexit_p() annotations pch_phub: delete duplicate definitions misc: Fix irq leak in max8997_muic_probe error path |
||
|
Linus Torvalds
|
a481991467 |
USB 3.5-rc1 pull request
Here is the big USB 3.5-rc1 pull request for the 3.5-rc1 merge window. It's touches a lot of different parts of the kernel, all USB drivers, due to some API cleanups (getting rid of the ancient err() macro) and some changes that are needed for USB 3.0 power management updates. There are also lots of new drivers, pimarily gadget, but others as well. We deleted a staging driver, which was nice, and finally dropped the obsolete usbfs code, which will make Al happy to never have to touch that again. There were some build errors in the tree that linux-next found a few days ago, but those were fixed by the most recent changes (all were due to us not building with CONFIG_PM disabled.) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.18 (GNU/Linux) iEYEABECAAYFAk+7qs0ACgkQMUfUDdst+ymjOgCfeoWqWk1bsKKt6SZULvQois5i 3csAn1Uapcm8Uswwpnj2v1/2Zh4rBHLA =4jM1 -----END PGP SIGNATURE----- Merge tag 'usb-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB 3.5-rc1 changes from Greg Kroah-Hartman: "Here is the big USB 3.5-rc1 pull request for the 3.5-rc1 merge window. It's touches a lot of different parts of the kernel, all USB drivers, due to some API cleanups (getting rid of the ancient err() macro) and some changes that are needed for USB 3.0 power management updates. There are also lots of new drivers, pimarily gadget, but others as well. We deleted a staging driver, which was nice, and finally dropped the obsolete usbfs code, which will make Al happy to never have to touch that again. There were some build errors in the tree that linux-next found a few days ago, but those were fixed by the most recent changes (all were due to us not building with CONFIG_PM disabled.) Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'usb-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (477 commits) xhci: Fix DIV_ROUND_UP compile error. xhci: Fix compile with CONFIG_USB_SUSPEND=n USB: Fix core compile with CONFIG_USB_SUSPEND=n brcm80211: Fix compile error for .disable_hub_initiated_lpm. Revert "USB: EHCI: work around bug in the Philips ISP1562 controller" MAINTAINERS: Add myself as maintainer to the USB PHY Layer USB: EHCI: fix command register configuration lost problem USB: Remove races in devio.c USB: ehci-platform: remove update_device USB: Disable hub-initiated LPM for comms devices. xhci: Add Intel U1/U2 timeout policy. xhci: Add infrastructure for host-specific LPM policies. USB: Add macros for interrupt endpoint types. xhci: Reserve one command for USB3 LPM disable. xhci: Some Evaluate Context commands must succeed. USB: Disable USB 3.0 LPM in critical sections. USB: Add support to enable/disable USB3 link states. USB: Allow drivers to disable hub-initiated LPM. USB: Calculate USB 3.0 exit latencies for LPM. USB: Refactor code to set LPM support flag. ... Conflicts: arch/arm/mach-exynos/mach-nuri.c arch/arm/mach-exynos/mach-universal_c210.c drivers/net/wireless/ath/ath6kl/usb.c |
||
|
Linus Torvalds
|
f6a26ae769 |
arm-soc: board specific changes
While we generally attempt to get rid of board specific files and replace
them with device tree based descriptions, a lot of platforms have not
come that far:
In shmobile, we add two new board files because their recently started
effort to add DT support has not proceeded enough to use it for all of
the important hardware.
In Kirkwood, we are adding support for new boards with a combination of
DT and board file contents in multiple cases.
pxa/mmp and imx are extending support for existing board files but not
adding new ones.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=wkmj
-----END PGP SIGNATURE-----
Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull arm-soc board specific changes from Olof Johansson:
"While we generally attempt to get rid of board specific files and
replace them with device tree based descriptions, a lot of platforms
have not come that far:
In shmobile, we add two new board files because their recently started
effort to add DT support has not proceeded enough to use it for all of
the important hardware.
In Kirkwood, we are adding support for new boards with a combination
of DT and board file contents in multiple cases.
pxa/mmp and imx are extending support for existing board files but not
adding new ones."
Fix up trivial conflicts in arch/arm/mach-{mmp/ttc_dkb.c,shmobile/{Kconfig,Makefile}}
* tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (94 commits)
ARM: shmobile: fix smp build
ARM: kirkwood: Add support for RaidSonic IB-NAS6210/6220 using devicetree
kirkwood: Add iconnect support
orion/kirkwood: create a generic function for gpio led blinking
kirkwood/orion: fix orion_gpio_set_blink
ARM: kirkwood: Define DNS-320/DNS-325 NAND in fdt
kirkwood: Allow nand to be configured via. devicetree
mtd: Add orion_nand devicetree bindings
ARM: kirkwood: Basic support for DNS-320 and DNS-325
ARM: mach-shmobile: Use DT_MACHINE for armadillo 800 eva
ARM: mach-shmobile: Use DT_MACHINE for KZM9G
ARM: pxa: hx4700: Add Synaptics NavPoint touchpad
ARM: pxa: Use REGULATOR_SUPPLY macro
ARM: mach-shmobile: kzm9g: enable SMP boot
ARM: mach-shmobile: kzm9g: defconfig update
ARM: mach-shmobile: kzm9g: add PCF8757 gpio-key
ARM: mach-shmobile: kzm9g: add SDHI support
ARM: mach-shmobile: kzm9g: add MMCIF support
ARM: mach-shmobile: kzm9g: correct screen direction
ARM: mach-shmobile: sh73a0.h: add GPIO_NR
...
|
||
David S. Miller
|
c3719a1ef5 |
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
John says: -------------------- I apologize for not having sent this sooner. FWIW, I was in a car somewhere between Illinois and North Carolina for most of the day Sunday and Monday... :-) This is (obviously) the last non-fix pull request for wireless bits intended for 3.5. It includes AP support for mwifiex, a variety of HCI and other updates for NFC, some brcmfmac and brcmsmac refactoring, a large batch of ssb and bcma updates, a batch of ath6kl updates, some cfg80211 and mac80211 updates/refactoring from Johannes Berg, a rather large collection of Bluetooth updates by way of Gustavo, and a variety of other bits here and there. -------------------- Signed-off-by: David S. Miller <davem@davemloft.net> |
||
John W. Linville
|
a0d0d1685f | Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next | ||
|
Linus Torvalds
|
813a95e5b4 |
arm-soc: soc-specific pinctrl changes
With this, five platforms are moving to the relatively new pinctrl
subsystem for their pin management, replacing the older soc specific
in-kernel interfaces with common code.
There is quite a bit of net addition of code for each platform being
added to the pinctrl subsystem. but the payback comes later when adding
new boards can be done by only providing new device trees instead.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=HIfz
-----END PGP SIGNATURE-----
Merge tag 'pinctrl' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull arm soc-specific pinctrl changes from Olof Johansson:
"With this, five platforms are moving to the relatively new pinctrl
subsystem for their pin management, replacing the older soc specific
in-kernel interfaces with common code.
There is quite a bit of net addition of code for each platform being
added to the pinctrl subsystem. But the payback comes later when
adding new boards can be done by only providing new device trees
instead."
Fix up trivial conflicts in arch/arm/mach-ux500/{Makefile,board-mop500.c}
* tag 'pinctrl' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (61 commits)
mtd: nand: gpmi: fix compile error caused by pinctrl call
ARM: PRIMA2: select PINCTRL and PINCTRL_SIRF in Kconfig
ARM: nomadik: enable PINCTRL_NOMADIK where needed
ARM: mxs: enable pinctrl support
video: mxsfb: adopt pinctrl support
ASoC: mxs-saif: adopt pinctrl support
i2c: mxs: adopt pinctrl support
mtd: nand: gpmi: adopt pinctrl support
mmc: mxs-mmc: adopt pinctrl support
serial: mxs-auart: adopt pinctrl support
serial: amba-pl011: adopt pinctrl support
spi/imx: adopt pinctrl support
i2c: imx: adopt pinctrl support
can: flexcan: adopt pinctrl support
net: fec: adopt pinctrl support
ARM: ux500: switch MSP to using pinctrl for pins
ARM: ux500: alter MSP registration to return a device pointer
ARM: ux500: switch to using pinctrl for uart0
ARM: ux500: delete custom pin control system
ARM: ux500: switch over to Nomadik pinctrl driver
...
|
||
Peter Ujfalusi
|
2ec1be3721 |
ASoC: omap-dmic: Add device tree bindings
Device tree support for OMAP4+ dmic cpu dai driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com> |
||
|
Peter Ujfalusi
|
7cb8a1b5ba |
ASoC: omap-mcpdm: Add device tree bindings
Device tree support for OMAP4+ McPDM cpu dai driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com> |
||
|
Linus Torvalds
|
b324c67d48 |
arm-soc: device tree conversions, part 1
The spear3xx, lpc32xx, shmobile and mmp platforms are joining the game of booting using device trees, which is a great step forward for them. at91 and spear have pretty much completed this process with a huge amount of work being put into at91. The other platforms are continuing the process. We finally start to see the payback on this investment, as new machines are getting supported purely by adding a .dts source file that can be completely independent of the kernel source. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJPueqRAAoJEIwa5zzehBx3AYkP/ibDGGd0qp1gxnxPYowliXcp lrWP8KB2PVcX/041jwpvsWeHzWT+Gm39ryBfz2L3pq/RiuU0jPPwChKgy1iglE8X 6Rq6sPWkXoDRtyeCuoiaxf1AYuzzAVdzZ0HlPO93tSKgo5eeyZRC5OeebAnrLDCE SDi8gZx2mm9+j2Dz46gq8QluyswMMbke3fHHHaHUlcP9fKIvFWvEfsn5j+YQ9bSw DrSIqGOzv6Emn7F6yhFQqxmk86KLnaXDVpAWgjVDhzaPv0rcTzloN6D2Ie2e5Vev BiRM1zvWn2d9kDk7gpm0t67nguYxsCBl1GNCP1brrncGwt15S10JimYlRhYW+B7u qgJqMPko3OnONvyl6e8qgIa2M5N4K/mo1i/jfOwFw3+KfUjXqLeio53Ysr4a6tsM Ev3bEsofNJKA0dlMcVzr7ntL087B6Y8mY3oJsVZji5M0KVfx1Jfn+X1W+l/2KD1H XWhJrCGa1HlbtSnrD+E91VHGC3M4sEXbbTljMAjHImlU9dGXmmbRMNsqNwkF6qFj EO2HnFvdN1oK+zEmeAttR1JHxfMdPFnTfmpUf3AiVSjGO//Wltelqx8ibA2Smn7S xXmzqX/HMhIOYCh81FdvzsK4qRYU5QyOsEJB4G0UjBZ66M1A3T/+vPpWuKsw5bUb qbnxaaXNsaZjWbbSSrZ4 =7DYv -----END PGP SIGNATURE----- Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull device tree conversions for arm-soc, part 1, from Olof Johansson: "The spear3xx, lpc32xx, shmobile and mmp platforms are joining the game of booting using device trees, which is a great step forward for them. at91 and spear have pretty much completed this process with a huge amount of work being put into at91. The other platforms are continuing the process. We finally start to see the payback on this investment, as new machines are getting supported purely by adding a .dts source file that can be completely independent of the kernel source." Fix up trivial conflict in arch/arm/Kconfig * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits) ARM: at91: Add ADC driver to at91sam9260/at91sam9g20 dtsi files arm/dts: omap4-panda: Add LEDs support arm/dts: omap4-sdp: Add LEDs support arm/dts: twl4030: Add twl4030-gpio node OMAP4: devices: Do not create mcpdm device if the dtb has been provided OMAP4: devices: Do not create dmic device if the dtb has been provided Documentation: update docs for mmp dt ARM: dts: refresh dts file for arch mmp ARM: mmp: support pxa910 with device tree ARM: mmp: support mmp2 with device tree gpio: pxa: parse gpio from DTS file ARM: mmp: support DT in timer ARM: mmp: support DT in irq ARM: mmp: append CONFIG_MACH_MMP2_DT ARM: mmp: fix build issue on mmp with device tree ARM: ux500: Enable PRCMU Timer 4 (clocksource) for Device Tree ARM: ux500: Disable SMSC911x platform code registration when DT is enabled ARM: ux500: Fork cpu-db8500 platform_devs for sequential DT enablement ARM: ux500: Do not attempt to register non-existent i2c devices on Snowball ARM: SPEAr3xx: Correct keyboard data passed from DT ... |
||
|
Linus Torvalds
|
9bc747bea5 |
arm-soc: First batch of cleanups
These cleanups are basically all over the place. The idea is to collect
changes with minimal impact but large number of changes so we can avoid
them from distracting in the diffstat in the other series.
A significant number of lines get removed here, in particular because
the ixp2000 and ixp23xx platforms get removed. These have never been
extremely popular and have fallen into disuse over time with no active
maintainer taking care of them. The u5500 soc never made it into a
product, so we are removing it from the ux500 platform.
Many good cleanups also went into the at91 and omap platforms, as has
been the case for a number of releases.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=Hcjs
-----END PGP SIGNATURE-----
Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull first batch of arm-soc cleanups from Olof Johansson:
"These cleanups are basically all over the place. The idea is to
collect changes with minimal impact but large number of changes so we
can avoid them from distracting in the diffstat in the other series.
A significant number of lines get removed here, in particular because
the ixp2000 and ixp23xx platforms get removed. These have never been
extremely popular and have fallen into disuse over time with no active
maintainer taking care of them. The u5500 soc never made it into a
product, so we are removing it from the ux500 platform.
Many good cleanups also went into the at91 and omap platforms, as has
been the case for a number of releases."
Trivial modify-delete conflicts in arch/arm/mach-{ixp2000,ixp23xx}
* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (152 commits)
ARM: clps711x: Cleanup IRQ handling
ARM clps711x: Removed unused header mach/time.h
ARM: clps711x: Added note about support EP731x CPU to Kconfig
ARM: clps711x: Added missing register definitions
ARM: clps711x: Used own subarch directory for store header file
Dove: Fix Section mismatch warnings
ARM: orion5x: ts78xx debugging changes
ARM: orion5x: remove PM dependency from ts78xx
ARM: orion5x: ts78xx fix NAND resource off by one
ARM: orion5x: ts78xx whitespace cleanups
Orion5x: Fix Section mismatch warnings
Orion5x: Fix warning: struct pci_dev declared inside paramter list
ARM: clps711x: Combine header files into one for clps711x-targets
ARM: S3C24XX: Use common macro to define resources on mach-qt2410.c
ARM: S3C24XX: Use common macro to define resources on mach-osiris.c
ARM: EXYNOS: Adapt to cpuidle core time keeping and irq enable
ARM: S5PV210: Use common macro to define resources on mach-smdkv210.c
ARM: S5PV210: Use common macro to define resources on dev-audio.c
ARM: S5PC100: Use common macro to define resources on dev-audio.c
ARM: S5P64X0: Use common macro to define resources on dev-audio.c
...
|
||
Felten, Lothar
|
f7c2fe386a |
hwmon: INA219 and INA226 support
Add support for the Texas Instruments INA219 and INA226 power monitors. Signed-off-by: Lothar Felten <l-felten@ti.com> [guenter.roeck@ericsson.com: formatting cleanup; check for smbus word data; select PGA=8 for INA219] Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> |
||
Jiri Kosina
|
99ce58ddc4 |
Merge branches 'upstream-fixes', 'wacom' and 'waltop' into for-linus
Conflicts: drivers/hid/hid-core.c |
||
Benjamin Herrenschmidt
|
6749ef0b8b |
Revert "powerpc/hw-breakpoint: Use generic hw-breakpoint interfaces for new PPC ptrace flags"
This reverts commit
|
||
|
Linus Torvalds
|
cb60e3e65c |
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:
"New notable features:
- The seccomp work from Will Drewry
- PR_{GET,SET}_NO_NEW_PRIVS from Andy Lutomirski
- Longer security labels for Smack from Casey Schaufler
- Additional ptrace restriction modes for Yama by Kees Cook"
Fix up trivial context conflicts in arch/x86/Kconfig and include/linux/filter.h
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (65 commits)
apparmor: fix long path failure due to disconnected path
apparmor: fix profile lookup for unconfined
ima: fix filename hint to reflect script interpreter name
KEYS: Don't check for NULL key pointer in key_validate()
Smack: allow for significantly longer Smack labels v4
gfp flags for security_inode_alloc()?
Smack: recursive tramsmute
Yama: replace capable() with ns_capable()
TOMOYO: Accept manager programs which do not start with / .
KEYS: Add invalidation support
KEYS: Do LRU discard in full keyrings
KEYS: Permit in-place link replacement in keyring list
KEYS: Perform RCU synchronisation on keys prior to key destruction
KEYS: Announce key type (un)registration
KEYS: Reorganise keys Makefile
KEYS: Move the key config into security/keys/Kconfig
KEYS: Use the compat keyctl() syscall wrapper on Sparc64 for Sparc32 compat
Yama: remove an unused variable
samples/seccomp: fix dependencies on arch macros
Yama: add additional ptrace scopes
...
|
||
|
Linus Torvalds
|
99262a3daf |
Autogenerated GPG tag for Rusty D1ADB8F1: 15EE 8D6C AB0E 7F0C F999 BFCB D920 0E6C D1AD B8F1
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJPuv35AAoJENkgDmzRrbjxUx4P/0uc+0oNnZv11vYQsqHuhURa zMlsVdlXGVkvPqQiLY0QkrK5LcO6KiSnSk8vEnOYFIPjL4wNqL/4RRRLnTAJwmE+ lsrL9DblI8Ira/EZRv7d2L12QrP+F2ZGKOZr67uVxSaxH71fUqtiJ0jqA/I8AYH7 /V7+DgdIB1DD28Ya/JEFEUi41F08A6MU10hpaQWy9kXv09gCc9apgvH7/S3s9DaQ G640YWkoKZAx/OFBb8XFvpu9LqZcVl02Nl8goMZOKnMctC4iU3km7HeVjfwCgLjO AdA5spLMhDkS/xrpI0mSQ/wT0k0+sSYW5vEdW9N4XLZza0NgH9GfU4RtEuK85Slj 7bPviZOcpjtt0sGi4wXCaVjZyHROX6tyRvTMUAIj3D0oJglb5T9D3MCvQnadILb0 I0+7gk3d9rHqkO6CmjNaZG9IwR9NpFkbuolcFQuEaZoUMoKd2pYNQyxpbFGl+jCl 7ViFHAy+fydNqDoETKincld4A43KWxOV7jyEJd7hloKcCixsqI7ZdPS7X8amec72 a0hfNgMJzarZkTgo61Hair/d+vKGRJPgEdF1Yq76SDhYKD1TeWeDjmboctsiMjqe f5M4C6IdNJj9cDIlCxMk+3bX250oy7KG77v7Ux0/7nvtSWVa3yEMowD57hnn1But 0gNC8bjXDHRsho90rDRN =Kj9v -----END PGP SIGNATURE----- Merge tag 'virtio-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus Pull virtio updates from Rusty Russell. * tag 'virtio-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: virtio: fix typo in comment virtio-mmio: Devices parameter parsing virtio_blk: Drop unused request tracking list virtio-blk: Fix hot-unplug race in remove method virtio: Use ida to allocate virtio index virtio: balloon: separate out common code between remove and freeze functions virtio: balloon: drop restore_common() 9p: disconnect channel when PCI device is removed virtio: update documentation to v0.9.5 of spec |
||
Pawel Moll
|
81a054ce0b |
virtio-mmio: Devices parameter parsing
This patch adds an option to instantiate guest virtio-mmio devices basing on a kernel command line (or module) parameter, for example: virtio_mmio.devices=0x100@0x100b0000:48 Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> |
||
Rusty Russell
|
33950c6e22 |
virtio: update documentation to v0.9.5 of spec
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> |
||
|
Linus Torvalds
|
226da0dbc8 |
Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU changes from Ingo Molnar:
"This is the v3.5 RCU tree from Paul E. McKenney:
1) A set of improvements and fixes to the RCU_FAST_NO_HZ feature (with
more on the way for 3.6). Posted to LKML:
https://lkml.org/lkml/2012/4/23/324 (commits 1-3 and 5),
https://lkml.org/lkml/2012/4/16/611 (commit 4),
https://lkml.org/lkml/2012/4/30/390 (commit 6), and
https://lkml.org/lkml/2012/5/4/410 (commit 7, combined with
the other commits for the convenience of the tester).
2) Changes to make rcu_barrier() avoid disrupting execution of CPUs
that have no RCU callbacks. Posted to LKML:
https://lkml.org/lkml/2012/4/23/322.
3) A couple of commits that improve the efficiency of the interaction
between preemptible RCU and the scheduler, these two being all that
survived an abortive attempt to allow preemptible RCU's
__rcu_read_lock() to be inlined. The full set was posted to LKML at
https://lkml.org/lkml/2012/4/14/143, and the first and third patches
of that set remain.
4) Lai Jiangshan's algorithmic implementation of SRCU, which includes
call_srcu() and srcu_barrier(). A major feature of this new
implementation is that synchronize_srcu() no longer disturbs the
execution of other CPUs. This work is based on earlier
implementations by Peter Zijlstra and Paul E. McKenney. Posted to
LKML: https://lkml.org/lkml/2012/2/22/82.
5) A number of miscellaneous bug fixes and improvements which were
posted to LKML at: https://lkml.org/lkml/2012/4/23/353 with
subsequent updates posted to LKML."
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
rcu: Make rcu_barrier() less disruptive
rcu: Explicitly initialize RCU_FAST_NO_HZ per-CPU variables
rcu: Make RCU_FAST_NO_HZ handle timer migration
rcu: Update RCU maintainership
rcu: Make exit_rcu() more precise and consolidate
rcu: Move PREEMPT_RCU preemption to switch_to() invocation
rcu: Ensure that RCU_FAST_NO_HZ timers expire on correct CPU
rcu: Add rcutorture test for call_srcu()
rcu: Implement per-domain single-threaded call_srcu() state machine
rcu: Use single value to handle expedited SRCU grace periods
rcu: Improve srcu_readers_active_idx()'s cache locality
rcu: Remove unused srcu_barrier()
rcu: Implement a variant of Peter's SRCU algorithm
rcu: Improve SRCU's wait_idx() comments
rcu: Flip ->completed only once per SRCU grace period
rcu: Increment upper bit only for srcu_read_lock()
rcu: Remove fast check path from __synchronize_srcu()
rcu: Direct algorithmic SRCU implementation
rcu: Introduce rcutorture testing for rcu_barrier()
timer: Fix mod_timer_pinned() header comment
...
|
||
|
Linus Torvalds
|
62c8d92278 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw
Pull GFS2 changes from Steven Whitehouse. * git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw: (24 commits) GFS2: Fix quota adjustment return code GFS2: Add rgrp information to block_alloc trace point GFS2: Eliminate unused "new" parameter to gfs2_meta_indirect_buffer GFS2: Update glock doc to add new stats info GFS2: Update main gfs2 doc GFS2: Remove redundant metadata block type check GFS2: Fix sgid propagation when using ACLs GFS2: eliminate log elements and simplify GFS2: Eliminate vestigial sd_log_le_rg GFS2: Eliminate needless parameter from function gfs2_setbit GFS2: Log code fixes GFS2: Remove unused argument from gfs2_internal_read GFS2: Remove bd_list_tr GFS2: Remove duplicate log code GFS2: Clean up log write code path GFS2: Use variable rather than qa to determine if unstuff necessary GFS2: Change variable blk to biblk GFS2: Fix function parameter comments in rgrp.c GFS2: Eliminate offset parameter to gfs2_setbit GFS2: Use slab for block reservation memory ... |
||
|
Takashi Iwai
|
85e184e4c3 |
ASoC: Last minute updates
These are all new code, they've been in -next already so should be OK for merge this time round. I'd been planning to send a pull request today after they'd had a bit of exposure there to make sure breakage didn't propagate into your tree. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIcBAABAgAGBQJPuldTAAoJEBus8iNuMP3d+AgP/jqsjHm4DRXw48OMO3gX45yN Y9JsvMQRYtiUY/zmfHKm8J2BoH3N1SdQjFXzp7qpAJ1RIz5aEKQu41ji/xDOSiu7 X/SxPxeMumZp50HjQS3VHyrwtkd+bwprbG0/Hk2TPnZ2aY6WQ6pfC3smHQYKQ75m saXrpmTv7s4zgAN2KXw35m304WvifuQ/KvUs/PU5LFVdy38YXacA0SMusTV6H2VG DN5ENxT2e9NYU5zTCTEVmK7vwoApsX7PmnDor6KygGUceGijHHmDtDqRWBxelVJv MS+LQsM3xdqRkX4gETtzg4EN7taRLRJQAFFImM32+M3u4g2Q2fYSpIEPYrf5SatP GxpcZogDtjs6e+SqtWQb8vFmVCEq/6icMpOzmUQZhoKjF4D5QO7gGN8LLPiahons Cc1C3L2JQO1tZ9vryt6aEub2vUNm7KO22ODqYo6xVYBaYYl8vv9WXvLv7TgTSocF YwsxaRfFTy8jlP1OFVsywQa5k1yPb/twD9HFNpwTUtMrMP4QPdp7wvJaDJrBBXxi U8uD/JSub/0CDjlYgvB/f6LRTZdjeVeirR9AyAyiLKnj9YxdrmY0v6n40voDFwMg wLGECAdksuDSfnnN7+k+LM7bRDycQhO/QMV7t6ZdtMl5KdQZ69KoK4qdyoLq4BUi c3LRJaPlV6tmI54YrhRN =5L34 -----END PGP SIGNATURE----- Merge tag 'asoc-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Last minute updates These are all new code, they've been in -next already so should be OK for merge this time round. I'd been planning to send a pull request today after they'd had a bit of exposure there to make sure breakage didn't propagate into your tree. |
||
|
Linus Torvalds
|
da4f58ffa0 |
SCSI misc on 20120521
-----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.18 (GNU/Linux) iQEcBAABAgAGBQJPuiSaAAoJEDeqqVYsXL0MJ8wH/2QYwxCtTzwgBE4DSUrZ/mnO ygiiausG7gNY845hAmXhoEqhYBe1GA/fvfSXOdurAPrFmfu2HvvPEyKmu3soWxLM rrXP7JNRjHOSz+GIktZECg6K9iobldl0zCxdn515ATnBEOZVom5v+uBE13sfg5uP iOS73JF7h2VRcAYuw8jsVTdc/rnH2nG4TsbW2B+Hp3Ti1pFSnyHbbNuE2FJ9bEX4 gTBtsYYRZPWl24WuhmmS6LHyGqL+rcU/wKj4+rAdNQwsh+MBgcMDhGQ1UWg/3OGN N8wur7AEQnyvsYdufjFNmHBux4TcdCVZISsWYb3frctJ5XVtYViMjlbmMMy1T7s= =rxQP -----END PGP SIGNATURE----- Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI misc update from James Bottomley: "The patch contains the usual assortment of driver updates (be2iscsi, bfa, bnx2i, fcoe, hpsa, isci, lpfc, megaraid, mpt2sas, pm8001, sg) plus an assortment of other changes and fixes. Also new is the fact that the isci update is delivered as a git merge (with signed tag)." * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (158 commits) isci: End the RNC resumption wait when the RNC is destroyed. isci: Fixed RNC bug that lost the suspension or resumption during destroy isci: Fix RNC AWAIT_SUSPENSION->INVALIDATING transition. isci: Manage the IREQ_NO_AUTO_FREE_TAG under scic_lock. isci: Remove obviated host callback list. isci: Check IDEV_GONE before performing abort path operations. isci: Restore the ATAPI device RNC management code. isci: Don't wait for an RNC suspend if it's being destroyed. isci: Change the phy control and link reset interface for HW reasons. isci: Added timeouts to RNC suspensions in the abort path. isci: Add protocol indicator for TMF requests. isci: Directly control IREQ_ABORT_PATH_ACTIVE when completing TMFs. isci: Wait for RNC resumption before leaving the abort path. isci: Fix RNC suspend call for SCI_RESUMING state. isci: Manage tag releases differently when aborting tasks. isci: Callbacks to libsas occur under scic_lock and are synchronized. isci: When in the abort path, defeat other resume calls until done. isci: Implement waiting for suspend in the abort path. isci: Make sure all TCs are terminated and cleaned in LUN reset. isci: Manage the LLHANG timer enable/disable per-device. ... |
||
|
Linus Torvalds
|
3d1482fe7a |
Pin control subsystem changes for kernel 3.5:
- Generic Device Tree bindings and hooks for drivers so we can
move over modern drivers to using this.
- Device Tree bindings for Tegra SoCs.
- Funneling some devicetree helper code for the drivers/of
subsystem.
- New pin control drivers for:
- Freescale MXS
- Freescale i.MX51
- Freescale i.MX53
- All of these use Device Tree bindings.
- Dummy pinctrl handles for stepwise migration to pinctrl, akin
to dummy regulators.
- Minor non-urgent fixes and improvments.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=RgIp
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-for-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control subsystem changes from Linus Walleij:
- Generic Device Tree bindings and hooks for drivers so we can move
over modern drivers to using this.
- Device Tree bindings for Tegra SoCs.
- Funneling some devicetree helper code for the drivers/of subsystem.
- New pin control drivers for:
* Freescale MXS
* Freescale i.MX51
* Freescale i.MX53
All of these use Device Tree bindings.
- Dummy pinctrl handles for stepwise migration to pinctrl, akin to
dummy regulators.
- Minor non-urgent fixes and improvments.
Fix up trivial conflicts in Documentation/driver-model/devres.txt and
drivers/pinctrl/core.c,
* tag 'pinctrl-for-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (46 commits)
pinctrl: pinctrl-imx: add imx51 pinctrl driver
pinctrl: pinctrl-imx: add imx53 pinctrl driver
pinctrl: pinctrl-pxa3xx: remove empty pinmux disable function
pinctrl: pinctrl-mxs: remove empty pinmux disable function
pinctrl: pinctrl-imx: remove empty pinmux disable function
pinctrl: make pinmux disable function optional
pinctrl: a minor error checking improvement for pinconf
pinctrl: mxs: skip gpio nodes for group creation
pinctrl: mxs: create group for pin config node
pinctrl: (cosmetic) fix two entries in DocBook comments
pinctrl: add more info to error msgs in pin_request
pinctrl: add pinctrl-mxs support
pinctrl: pinctrl-imx: add imx6q pinctrl driver
pinctrl: pinctrl-imx: add imx pinctrl core driver
dt: add of_get_child_count helper function
pinctrl: support gpio request deferred probing
pinctrl: add pinctrl_provide_dummies interface for platforms to use
pinctrl: enhance reporting of errors when loading from DT
pinctrl: add kerneldoc for pinctrl_ops device tree functions
pinctrl: propagate map validation errors
...
|
||
|
Linus Torvalds
|
ac1806572d |
regulator updates for 3.5
The major thing here is the addition of some helpers to factor code out
of drivers, making a fair proportion of regulators much more just data
rather than code which is nice.
- Helpers in the core for regulators using regmap, providing generic
implementations of the enable and voltage selection operations which
just need data to describe them in the drivers.
- Split out voltage mapping and voltage setting, allowing many more
drivers to take advantage of the infrastructure for selectors.
- Loads and loads of cleanups from Axel Lin once again, including many
changes to take advantage of the above new framework features
- New drivers for Ricoh RC5T583, TI TPS62362, TI TPS62363, TI TPS65913,
TI TWL6035 and TI TWL6037.
Some of the registration changes to support the core refactoring caused
so many conflicts that eventually topic branches were abandoned for this
release.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=UR7s
-----END PGP SIGNATURE-----
Merge tag 'regulator-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"The major thing here is the addition of some helpers to factor code
out of drivers, making a fair proportion of regulators much more just
data rather than code which is nice.
- Helpers in the core for regulators using regmap, providing generic
implementations of the enable and voltage selection operations which
just need data to describe them in the drivers.
- Split out voltage mapping and voltage setting, allowing many more
drivers to take advantage of the infrastructure for selectors.
- Loads and loads of cleanups from Axel Lin once again, including many
changes to take advantage of the above new framework features
- New drivers for Ricoh RC5T583, TI TPS62362, TI TPS62363, TI
TPS65913, TI TWL6035 and TI TWL6037.
Some of the registration changes to support the core refactoring
caused so many conflicts that eventually topic branches were abandoned
for this release."
* tag 'regulator-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (227 commits)
regulator: tps65910: use of_node of matched regulator being register
regulator: tps65910: dt: support when "regulators" node found
regulator: tps65910: add error message in case of failure
regulator: tps62360: dt: initialize of_node param for regulator register.
regulator: tps65910: use devm_* for memory allocation
regulator: tps65910: use small letter for regulator names
mfd: tpx6586x: Depend on regulator
regulator: regulator for Palmas Kconfig
regulator: regulator driver for Palmas series chips
regulator: Enable Device Tree for the db8500-prcmu regulator driver
regulator: db8500-prcmu: Separate regulator registration from probe
regulator: ab3100: Use regulator_map_voltage_iterate()
regulator: tps65217: Convert to set_voltage_sel and map_voltage
regulator: Enable the ab8500 for Device Tree
regulator: ab8500: Split up probe() into manageable pieces
regulator: max8925: Remove check_range function and max_uV from struct rc5t583_regulator_info
regulator: max8649: Remove unused check_range() function
regulator: rc5t583: Remove max_uV from struct rc5t583_regulator_info
regulator: da9052: Convert to set_voltage_sel and map_voltage
regulator: max8952: Use devm_kzalloc
...
|
||
|
Linus Torvalds
|
3bb07f1b73 |
PCI changes for the 3.5 merge window:
- Host bridge cleanups from Yinghai - Disable Bus Master bit on PCI device shutdown (kexec-related) - Stratus ftServer fix - pci_dev_reset() locking fix - IvyBridge graphics erratum workaround -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) iQIcBAABAgAGBQJPumymAAoJEPGMOI97Hn6z9JUQALVh5UE/X+kg9CU63FGSwrRQ nMiQiOv4uX3K+QV7LJsx/wKlOu2AQuZvHbiDNn100865LlLvMfPLOhYxzitjQ9fb 38j9GsXBgMxPQZOdvWT9F6XUTONR84w3xoxGFZb1sLAmAxkWhsHBCGSfNwJXzQhG 7AENGhby/AisYpHT915KJ3ZshSIiqHEo34DFyQtEkjaJRWIC643TMQoBhURb+aIn K/rjaWxS4AaXue3npkpBTyd2ngMiDz65+FTUJXxy+F0sIZ5w44ZZCdBk59UCLVYU LynjXeHWYzvC6YKOF47PY/vkToVcX3mtZ06KpW8kuesZDAO+qAdPnVOlY/O21NCI 6KKCn3bkGEOldHLsw5mtUU5Pwf1WixfURiDi5bd/X1k5NeFJNjyvWJ/HArJS8OAh CvJO9UNsgaqAcx4fnrJ+CY2PcX1W44m1IsqpCMbxbSRXPEN+JLBrW7oeRrk0hyIa dhUZXt7wancda8iK5XYFPhFwaMRnsAibdsUOBecSK6XhVtmd6hflo3p6DWRQdpXL R3pECiI4j3lBCByQCMbSSk6TOCj4J2spRSZOE38n0nNAoR4Vxldw1m1uyE2swP0v n+KYd5w3O3VwLAFGMYI7LYtwWlTBX7ith/NAnsn1YEtiBBm9Ft51c38jI1QtzjOU lrzViloqYnYGJctJ4ojo =gHTG -----END PGP SIGNATURE----- Merge tag 'pci-for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: - Host bridge cleanups from Yinghai - Disable Bus Master bit on PCI device shutdown (kexec-related) - Stratus ftServer fix - pci_dev_reset() locking fix - IvyBridge graphics erratum workaround * tag 'pci-for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (21 commits) microblaze/PCI: fix "io_offset undeclared" error x86/PCI: only check for spinlock being held in SMP kernels resources: add resource_overlaps() PCI: fix uninitialized variable 'cap_mask' MAINTAINERS: update PCI git tree and patchwork PCI: disable Bus Master on PCI device shutdown PCI: work around IvyBridge internal graphics FLR erratum x86/PCI: fix unused variable warning in amd_bus.c PCI: move mutex locking out of pci_dev_reset function PCI: work around Stratus ftServer broken PCIe hierarchy x86/PCI: merge pcibios_scan_root() and pci_scan_bus_on_node() x86/PCI: dynamically allocate pci_root_info for native host bridge drivers x86/PCI: embed pci_sysdata into pci_root_info on ACPI path x86/PCI: embed name into pci_root_info struct x86/PCI: add host bridge resource release for _CRS path x86/PCI: refactor get_current_resources() PCI: add host bridge release support PCI: add generic device into pci_host_bridge struct PCI: rename pci_host_bridge() to find_pci_root_bridge() x86/PCI: fix memleak with get_current_resources() ... |
||
|
Linus Torvalds
|
ff8ce5f67d |
Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm
Pull core ARM updates from Russell King:
"This is the bulk of the core ARM updates for this merge window.
Included in here is a different way to handle the VIVT cache flushing
on context switch, which should allow scheduler folk to remove a
special case in their core code.
We have architectured timer support here, which is a set of timers
specified by the ARM architecture for future SoCs. So we should see
less variability in timer design going forward.
The last big thing here is my cleanup to the way we handle PCI across
ARM, fixing some oddities in some platforms which hadn't realised
there was a way to deal with their private data already built in to
our PCI backend.
I've also removed support for the ARMv3 architecture; it hasn't worked
properly for years so it seems pointless to keep it around."
* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (47 commits)
ARM: PCI: remove per-pci_hw list of buses
ARM: PCI: dove/kirkwood/mv78xx0: use sys->private_data
ARM: PCI: provide a default bus scan implementation
ARM: PCI: get rid of pci_std_swizzle()
ARM: PCI: versatile: fix PCI interrupt setup
ARM: PCI: integrator: use common PCI swizzle
ARM: 7416/1: LPAE: Remove unused L_PTE_(BUFFERABLE|CACHEABLE) macros
ARM: 7415/1: vfp: convert printk's to pr_*'s
ARM: decompressor: avoid speculative prefetch from non-RAM areas
ARM: Remove ARMv3 support from decompressor
ARM: 7413/1: move read_{boot,persistent}_clock to the architecture level
ARM: Remove support for ARMv3 ARM610 and ARM710 CPUs
ARM: 7363/1: DEBUG_LL: limit early mapping to the minimum
ARM: 7391/1: versatile: add some auxdata for device trees
ARM: 7389/2: plat-versatile: modernize FPGA IRQ controller
AMBA: get rid of last two uses of NO_IRQ
ARM: 7408/1: cacheflush: return error to userspace when flushing syscall fails
ARM: 7409/1: Do not call flush_cache_user_range with mmap_sem held
ARM: 7404/1: cmpxchg64: use atomic64 and local64 routines for cmpxchg64
ARM: 7347/1: SCU: use cpu_logical_map for per-CPU low power mode
...
|
||
|
Linus Torvalds
|
4f6ade9153 |
Merge branch 'clkdev' of git://git.linaro.org/people/rmk/linux-arm
Pull clkdev updates from Russell King: "This supplements clkdev with a device-managed API, allowing drivers cleanup paths to be simplified. We also optimize clk_find() so that it exits as soon as it finds a perfect match, and we provide a way to minimise the amount of code platforms need to register clkdev entries. Some of the code in arm-soc depends on these changes." * 'clkdev' of git://git.linaro.org/people/rmk/linux-arm: CLKDEV: provide helpers for common clock framework ARM: 7392/1: CLKDEV: Optimize clk_find() ARM: 7376/1: clkdev: Implement managed clk_get() |
||
|
Linus Torvalds
|
9daeaa3705 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next
Pull sparc updates from David Miller:
1) Kill off support for sun4c and Cypress sun4m chips.
And as a result we were able to also kill off that ugly btfixup thing
that required multi-stage links of the final vmlinux image in the
Kbuild system. This should make the kbuild maintainers really happy.
Thanks a lot to Sam Ravnborg for his tireless efforts to get this
going.
2) Convert sparc64 to nobootmem. I suspect now with sparc32 being a lot
cleaner, it should be able to fall in line and modernize in this area
too.
3) Make sparc32 use generic clockevents, from Tkhai Kirill.
[ I fixed up the BPF rules, and tried to clean up the build rules too.
But I don't have - or want - a sparc cross-build environment, so the
BPF rule bug and the related build cleanup was all done with just a
bare "make -n" pseudo-test. - Linus ]
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next: (110 commits)
sparc32: use flushi when run-time patching in per_cpu_patch
sparc32: fix cpuid_patch run-time patching
sparc32: drop unused inline functions in srmmu.c
sparc32: drop unused functions in pgtsrmmu.h
sparc32,leon: move leon mmu functions to leon_mm.c
sparc32,leon: remove duplicate definitions in leon.h
sparc32,leon: remove duplicate UART register definitions
sparc32,leon: move leon ASI definitions to asi.h
sparc32: move trap table to a separate file
sparc64: renamed ttable.S to ttable_64.S
sparc32: Remove asm/sysen.h header.
sparc32: Delete asm/smpprim.h
sparc32: Remove unused empty_bad_page{,_table} declarations.
sparc32: Kill boot_cpu_id4
sparc32: Move GET_PROCESSOR*_ID() out of asm/asmmacro.h
sparc32: Remove completely unused code from asm/cache.h
sparc32: Add ucmpdi2.o to obj-y instead of lib-y.
sparc32: add ucmpdi2
sparc: introduce arch/sparc/Kbuild
sparc: remove obsolete documentation
...
|
||
John Crispin
|
54f3006617 |
GPIO: MIPS: lantiq: convert gpio-stp-xway to OF
Implements OF support and add code to load custom properties from the DT. The Serial To Parallel (STP) is found on MIPS based Lantiq socs. It is a peripheral controller used to drive external shift register cascades. At most 3 groups of 8 bits can be driven. The hardware is able to allow the DSL modem to drive the 2 LSBs of the cascade automatically. Newer socs are also able to automatically drive some pins via the internal PHYs. The driver currently only supports output functionality. Patches for the input feature found on newer generations of the soc will be provided in a later series. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Acked-by: Grant Likely <grant.likely@secretlab.ca> Patchwork: https://patchwork.linux-mips.org/patch/3839/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> |
||
|
John Crispin
|
a36e9a1c5f |
GPIO: MIPS: lantiq: convert gpio-mm-lantiq to OF and of_mm_gpio
Implements OF support and convert to of_mm_gpio. By attaching hardware latches to the External Bus Unit (EBU) on Lantiq SoC, it is possible to create output only gpios. This driver configures a special memory address, which when written to, outputs 16 bit to the latches. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Acked-by: Grant Likely <grant.likely@secretlab.ca> Patchwork: https://patchwork.linux-mips.org/patch/3840/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> |
||
Marek Szyprowski
|
c790950928 |
ARM: integrate CMA with DMA-mapping subsystem
This patch adds support for CMA to dma-mapping subsystem for ARM architecture. By default a global CMA area is used, but specific devices are allowed to have their private memory areas if required (they can be created with dma_declare_contiguous() function during board initialisation). Contiguous memory areas reserved for DMA are remapped with 2-level page tables on boot. Once a buffer is requested, a low memory kernel mapping is updated to to match requested memory access type. GFP_ATOMIC allocations are performed from special pool which is created early during boot. This way remapping page attributes is not needed on allocation time. CMA has been enabled unconditionally for ARMv6+ systems. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> CC: Michal Nazarewicz <mina86@mina86.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Rob Clark <rob.clark@linaro.org> Tested-by: Ohad Ben-Cohen <ohad@wizery.com> Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Tested-by: Robert Nelson <robertcnelson@gmail.com> Tested-by: Barry Song <Baohua.Song@csr.com> |
||
|
Marek Szyprowski
|
c64be2bb1c |
drivers: add Contiguous Memory Allocator
The Contiguous Memory Allocator is a set of helper functions for DMA mapping framework that improves allocations of contiguous memory chunks. CMA grabs memory on system boot, marks it with MIGRATE_CMA migrate type and gives back to the system. Kernel is allowed to allocate only movable pages within CMA's managed memory so that it can be used for example for page cache when DMA mapping do not use it. On dma_alloc_from_contiguous() request such pages are migrated out of CMA area to free required contiguous block and fulfill the request. This allows to allocate large contiguous chunks of memory at any time assuming that there is enough free memory available in the system. This code is heavily based on earlier works by Michal Nazarewicz. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Rob Clark <rob.clark@linaro.org> Tested-by: Ohad Ben-Cohen <ohad@wizery.com> Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Tested-by: Robert Nelson <robertcnelson@gmail.com> Tested-by: Barry Song <Baohua.Song@csr.com> |
||
James Bottomley
|
e346933365 |
isci update for 3.5
1/ Rework remote-node-context (RNC) handling for proper management of
the silicon state machine in error handling and hot-plug conditions.
Further details below, suffice to say if the RNC is mismanaged the
silicon state machines may lock up.
2/ Refactor the initialization code to be reused for suspend/resume support
3/ Miscellaneous bug fixes to address discovery issues and hardware
compatibility.
RNC rework details from Jeff Skirvin:
In the controller, devices as they appear on a SAS domain (or
direct-attached SATA devices) are represented by memory structures known
as "Remote Node Contexts" (RNCs). These structures are transferred from
main memory to the controller using a set of register commands; these
commands include setting up the context ("posting"), removing the
context ("invalidating"), and commands to control the scheduling of
commands and connections to that remote device ("suspensions" and
"resumptions"). There is a similar path to control RNC scheduling from
the protocol engine, which interprets the results of command and data
transmission and reception.
In general, the controller chooses among non-suspended RNCs to find one
that has work requiring scheduling the transmission of command and data
frames to a target. Likewise, when a target tries to return data back
to the initiator, the state of the RNC is used by the controller to
determine how to treat the incoming request. As an example, if the RNC
is in the state "TX/RX Suspended", incoming SSP connection requests from
the target will be rejected by the controller hardware. When an RNC is
"TX Suspended", it will not be selected by the controller hardware to
start outgoing command or data operations (with certain priority-based
exceptions).
As mentioned above, there are two sources for management of the RNC
states: commands from driver software, and the result of transmission
and reception conditions of commands and data signaled by the controller
hardware. As an example of the latter, if an outgoing SSP command ends
with a OPEN_REJECT(BAD_DESTINATION) status, the RNC state will
transition to the "TX Suspended" state, and this is signaled by the
controller hardware in the status to the completion of the pending
command as well as signaled in a controller hardware event. Examples of
the former are included in the patch changelogs.
Driver software is required to suspend the RNC in a "TX/RX Suspended"
condition before any outstanding commands can be terminated. Failure to
guarantee this can lead to a complete hardware hang condition. Earlier
versions of the driver software did not guarantee that an RNC was
correctly managed before I/O termination, and so operated in an unsafe
way.
Further, the driver performed unnecessary contortions to preserve the
remote device command state and so was more complicated than it needed
to be. A simplifying driver assumption is that once an I/O has entered
the error handler path without having completed in the target, the
requirement on the driver is that all use of the sas_task must end.
Beyond that, recovery of operation is dependent on libsas and other
components to reset, rediscover and reconfigure the device before normal
operation can restart. In the driver, this simplifying assumption meant
that the RNC management could be reduced to entry into the suspended
state, terminating the targeted I/O request, and resuming the RNC as
needed for device-specific management such as an SSP Abort Task or LUN
Reset Management request.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=HYvO
-----END PGP SIGNATURE-----
Merge tag 'isci-for-3.5' into misc
isci update for 3.5
1/ Rework remote-node-context (RNC) handling for proper management of
the silicon state machine in error handling and hot-plug conditions.
Further details below, suffice to say if the RNC is mismanaged the
silicon state machines may lock up.
2/ Refactor the initialization code to be reused for suspend/resume support
3/ Miscellaneous bug fixes to address discovery issues and hardware
compatibility.
RNC rework details from Jeff Skirvin:
In the controller, devices as they appear on a SAS domain (or
direct-attached SATA devices) are represented by memory structures known
as "Remote Node Contexts" (RNCs). These structures are transferred from
main memory to the controller using a set of register commands; these
commands include setting up the context ("posting"), removing the
context ("invalidating"), and commands to control the scheduling of
commands and connections to that remote device ("suspensions" and
"resumptions"). There is a similar path to control RNC scheduling from
the protocol engine, which interprets the results of command and data
transmission and reception.
In general, the controller chooses among non-suspended RNCs to find one
that has work requiring scheduling the transmission of command and data
frames to a target. Likewise, when a target tries to return data back
to the initiator, the state of the RNC is used by the controller to
determine how to treat the incoming request. As an example, if the RNC
is in the state "TX/RX Suspended", incoming SSP connection requests from
the target will be rejected by the controller hardware. When an RNC is
"TX Suspended", it will not be selected by the controller hardware to
start outgoing command or data operations (with certain priority-based
exceptions).
As mentioned above, there are two sources for management of the RNC
states: commands from driver software, and the result of transmission
and reception conditions of commands and data signaled by the controller
hardware. As an example of the latter, if an outgoing SSP command ends
with a OPEN_REJECT(BAD_DESTINATION) status, the RNC state will
transition to the "TX Suspended" state, and this is signaled by the
controller hardware in the status to the completion of the pending
command as well as signaled in a controller hardware event. Examples of
the former are included in the patch changelogs.
Driver software is required to suspend the RNC in a "TX/RX Suspended"
condition before any outstanding commands can be terminated. Failure to
guarantee this can lead to a complete hardware hang condition. Earlier
versions of the driver software did not guarantee that an RNC was
correctly managed before I/O termination, and so operated in an unsafe
way.
Further, the driver performed unnecessary contortions to preserve the
remote device command state and so was more complicated than it needed
to be. A simplifying driver assumption is that once an I/O has entered
the error handler path without having completed in the target, the
requirement on the driver is that all use of the sas_task must end.
Beyond that, recovery of operation is dependent on libsas and other
components to reset, rediscover and reconfigure the device before normal
operation can restart. In the driver, this simplifying assumption meant
that the RNC management could be reduced to entry into the suspended
state, terminating the targeted I/O request, and resuming the RNC as
needed for device-specific management such as an SSP Abort Task or LUN
Reset Management request.
|
||
|
Takashi Iwai
|
382e6a859e | Merge branch 'topic/misc' into for-linus |