This patch adds a new bridge port flag BR_NEIGH_SUPPRESS to
suppress arp and nd flood on bridge ports. It implements
rfc7432, section 10.
https://tools.ietf.org/html/rfc7432#section-10
for ethernet VPN deployments. It is similar to the existing
BR_PROXYARP* flags but has a few semantic differences to conform
to EVPN standard. Unlike the existing flags, this new flag suppresses
flood of all neigh discovery packets (arp and nd) to tunnel ports.
Supports both vlan filtering and non-vlan filtering bridges.
In case of EVPN, it is mainly used to avoid flooding
of arp and nd packets to tunnel ports like vxlan.
This patch adds netlink and sysfs support to set this bridge port
flag.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido reported following splat and provided a patch.
[ 122.221814] BUG: using smp_processor_id() in preemptible [00000000] code: sshd/2672
[ 122.221845] caller is debug_smp_processor_id+0x17/0x20
[ 122.221866] CPU: 0 PID: 2672 Comm: sshd Not tainted 4.14.0-rc3-idosch-next-custom #639
[ 122.221880] Hardware name: Mellanox Technologies Ltd. MSN2100-CB2FO/SA001017, BIOS 5.6.5 06/07/2016
[ 122.221893] Call Trace:
[ 122.221919] dump_stack+0xb1/0x10c
[ 122.221946] ? _atomic_dec_and_lock+0x124/0x124
[ 122.221974] ? ___ratelimit+0xfe/0x240
[ 122.222020] check_preemption_disabled+0x173/0x1b0
[ 122.222060] debug_smp_processor_id+0x17/0x20
[ 122.222083] ip6_pol_route+0x1482/0x24a0
...
I believe we can simplify this code path a bit, since we no longer
hold a read_lock and need to release it to avoid a dead lock.
By disabling BH, we make sure we'll prevent code re-entry and
rt6_get_pcpu_route()/rt6_make_pcpu_route() run on the same cpu.
Fixes: 66f5d6ce53 ("ipv6: replace rwlock with rcu and spinlock in fib6_table")
Reported-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similarly to early patch for erspan_xmit(), the ARPHDR_ETHER device
is the length of the whole ether packet. So skb->len should subtract
the dev->hard_header_len.
Fixes: 1a66a836da ("gre: add collect_md mode to ERSPAN tunnel")
Fixes: 84e54fe0a5 ("gre: introduce native tunnel support for ERSPAN")
Signed-off-by: William Tu <u9012063@gmail.com>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: David Laight <David.Laight@aculab.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The phonet_protocol structs don't need to be written by anyone and
so can be marked as const.
Signed-off-by: Lin Zhang <xiaolou4617@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit introduces the MPLSoGRE support (RFC 4023), using ip tunnel
API by simply adding ipgre_tunnel_encap_(add|del)_mpls_ops() and the new
tunnel type TUNNEL_ENCAP_MPLS.
Signed-off-by: Amine Kherbouche <amine.kherbouche@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, most of the rt6_stats are not hooked up correctly. As the
last part of this patch series, hook up all existing rt6_stats and add
one new stat fib_rt_uncache to indicate the number of routes in the
uncached list.
For details of the stats, please refer to the comments added in
include/net/ip6_fib.h.
Note: fib_rt_alloc and fib_rt_uncache are not guaranteed to be modified
under a lock. So atomic_t is used for them.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With all the preparation work before, we are now ready to replace rwlock
with rcu and spinlock in fib6_table.
That means now all fib6_node in fib6_table are protected by rcu. And
when freeing fib6_node, call_rcu() is used to wait for the rcu grace
period before releasing the memory.
When accessing fib6_node, corresponding rcu APIs need to be used.
And all previous sessions protected by the write lock will now be
protected by the spin lock per table.
All previous sessions protected by read lock will now be protected by
rcu_read_lock().
A couple of things to note here:
1. As part of the work of replacing rwlock with rcu, the linked list of
fn->leaf now has to be rcu protected as well. So both fn->leaf and
rt->dst.rt6_next are now __rcu tagged and corresponding rcu APIs are
used when manipulating them.
2. For fn->rr_ptr, first of all, it also needs to be rcu protected now
and is tagged with __rcu and rcu APIs are used in corresponding places.
Secondly, fn->rr_ptr is changed in rt6_select() which is a reader
thread. This makes the issue a bit complicated. We think a valid
solution for it is to let rt6_select() grab the tb6_lock if it decides
to change it. As it is not in the normal operation and only happens when
there is no valid neighbor cache for the route, we think the performance
impact should be low.
3. fib6_walk_continue() has to be called with tb6_lock held even in the
route dumping related functions, e.g. inet6_dump_fib(),
fib6_tables_dump() and ipv6_route_seq_ops. It is because
fib6_walk_continue() makes modifications to the walker structure, and so
are fib6_repair_tree() and fib6_del_route(). In order to do proper
syncing between them, we need to let fib6_walk_continue() hold the lock.
We may be able to do further improvement on the way we do the tree walk
to get rid of the need for holding the spin lock. But not for now.
4. When fib6_del_route() removes a route from the tree, we no longer
mark rt->dst.rt6_next to NULL to make simultaneous reader be able to
further traverse the list with rcu. However, rt->dst.rt6_next is only
valid within this same rcu period. No one should access it later.
5. All the operation of atomic_inc(rt->rt6i_ref) is changed to be
performed before we publish this route (either by linking it to fn->leaf
or insert it in the list pointed by fn->leaf) just to be safe because as
soon as we publish the route, some read thread will be able to access it.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After rwlock is replaced with rcu and spinlock, fib6_lookup() could
potentially return an intermediate node if other thread is doing
fib6_del() on a route which is the only route on the node so that
fib6_repair_tree() will be called on this node and potentially assigns
fn->leaf to the its child's fn->leaf.
In order to detect this situation in rt6_select(), we have to check if
fn->fn_bit is consistent with the key length stored in the route. And
depending on if the fn is in the subtree or not, the key is either
rt->rt6i_dst or rt->rt6i_src.
If any inconsistency is found, that means the node no longer holds valid
routes in it. So net->ipv6.ip6_null_entry is returned.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If rwlock is replaced with rcu and spinlock, it is possible that the
reader thread will see fn->leaf as NULL in the following scenarios:
1. fib6_add() is in progress and we have already inserted a new node but
not yet inserted the route.
2. fib6_del_route() is in progress and we have already set fn->leaf to
NULL but not yet freed the node because of rcu grace period.
This patch makes sure all the reader threads check fn->leaf first before
using it. And together with later patch to grab rcu_read_lock() and
rcu_dereference() fn->leaf, it makes sure reader threads are safe when
accessing fn->leaf.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
fib6_add() logic currently calls fib6_add_1() to figure out what node
should be used for the newly added route and then call
fib6_add_rt2node() to insert the route to the node.
And during the call of fib6_add_1(), fn_sernum is updated for all nodes
that share the same prefix as the new route.
This does not have issue in the current code because reader thread will
not be able to access the tree while writer thread is inserting new
route to it. However, it is not the case once we transition to use RCU.
Reader thread could potentially see the new fn_sernum before the new
route is inserted. As a result, reader thread's route lookup will return
a stale route with the new fn_sernum.
In order to solve this issue, we remove all the update of fn_sernum in
fib6_add_1(), and instead, introduce a new function that updates fn_sernum
for all related nodes and call this functions once the route is
successfully inserted to the tree.
Also, smp_wmb() is used after a route is successfully inserted into the
fib tree and right before the updated of fn->sernum. And smp_rmb() is
used right after fn->sernum is accessed in rt6_get_cookie_safe(). This
is to guarantee that when the reader thread sees the new fn->sernum, the
new route is already inserted in the tree in memory.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With rwlock, it is safe to call dst_hold() in the read thread because
read thread is guaranteed to be separated from write thread.
However, after we replace rwlock with rcu, it is no longer safe to use
dst_hold(). A dst might already have been deleted but is waiting for the
rcu grace period to pass before freeing the memory when a read thread is
trying to do dst_hold(). This could potentially cause double free issue.
So this commit replaces all dst_hold() with dst_hold_safe() in all read
thread to avoid this double free issue.
And in order to make the code more compact, a new function ip6_hold_safe()
is introduced. It calls dst_hold_safe() first, and if that fails, it will
either fall back to hold and return net->ipv6.ip6_null_entry or set rt to
NULL according to the caller's need.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After rwlock is replaced with rcu and spinlock, route lookup can happen
simultanously with route deletion.
This patch removes the call to free_percpu(rt->rt6i_pcpu) from
rt6_release() to avoid the race condition between rt6_release() and
rt6_get_pcpu_route(). And as free_percpu(rt->rt6i_pcpu) is already
called in ip6_dst_destroy() after the rcu grace period, it is safe to do
this change.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After rwlock is replaced with rcu and spinlock, ip6_pol_route() will be
called with only rcu held. That means rt6 route deletion could happen
simultaneously with rt6_make_pcpu_rt(). This could potentially cause
memory leak if rt6_release() is called right before rt6_make_pcpu_rt()
on the same route.
This patch grabs rt->rt6i_ref safely before calling rt6_make_pcpu_rt()
to make sure rt6_release() will not get triggered while
rt6_make_pcpu_rt() is in progress. And rt6_release() is called after
rt6_make_pcpu_rt() is finished.
Note: As we are incrementing rt->rt6i_ref in ip6_pol_route(), there is a
very slim chance that fib6_purge_rt() will be triggered unnecessarily
when deleting a route if ip6_pol_route() running on another thread picks
this route as well and tries to make pcpu cache for it.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit makes use of the exception hash table implementation to
store dst caches created by pmtu discovery and ip redirect into the hash
table under the rt_info and no longer inserts these routes into fib6
tree.
This makes the fib6 tree only contain static configured routes and could
now be protected by rcu instead of a rw lock.
With this change, in the route lookup related functions, after finding
the rt6_info with the longest prefix, we also need to search for the
exception table before doing backtracking.
In the route delete function, if the route being deleted is not a dst
cache, deletion of this route also need to flush the whole hash table
under it. If it is a dst cache, then only delete the cached dst in the
hash table.
Note: for fib6_walk_continue() function, w->root now is always pointing
to a root node considering that fib6_prune_clones() is removed from the
code. So we add a WARN_ON() msg to make sure w->root always points to a
root node and also removed the update of w->root in fib6_repair_tree().
This is a prerequisite for later patch because we don't need to make
w->root as rcu protected when replacing rwlock with RCU.
Also, we remove all prune related variables as it is no longer used.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
fib6_locate() is used to find the fib6_node according to the passed in
prefix address key. It currently tries to find the fib6_node with the
exact match of the passed in key. However, when we move cached routes
into the exception table, fib6_locate() will fail to find the fib6_node
for it as the cached routes will be stored in the exception table under
the fib6_node with the longest prefix match of the cache's dst addr key.
This commit adds a new parameter to let the caller specify if it needs
exact match or longest prefix match.
Right now, all callers still does exact match when calling
fib6_locate(). It will be changed in later commit where exception table
is hooked up to store cached routes.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If all dst cache entries are stored in the exception table under the
main route, we have to go through them during fib6_age() when doing
garbage collecting.
Introduce a new function rt6_age_exception() which goes through all dst
entries in the exception table and remove those entries that are expired.
This function is called in fib6_age() so that all dst caches are also
garbage collected.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we move all cached dst into the exception table under the main route,
current rt6_clean_tohost() will no longer be able to access them.
This commit makes fib6_clean_tohost() to also go through all cached
routes in exception table and removes cached gateway routes to the
passed in gateway.
This is a preparation in order to move all cached routes into the
exception table.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we move all cached dst into the exception table under the main route,
current rt6_mtu_change() will no longer be able to access them.
This commit makes rt6_mtu_change_route() function to also go through all
cached routes in the exception table under the main route and do proper
updates on the mtu.
This is a preparation in order to move all cached routes into the
exception table.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After we move cached dst entries into the exception table under its
parent route, current fib6_remove_prefsrc() no longer can access them.
This commit makes fib6_remove_prefsrc() also go through all routes
in the exception table to remove the pref src.
This is a preparation patch in order to move all cached dst into the
exception table.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a hash table into struct rt6_info in order to store dst caches
created by pmtu discovery and ip redirect in ipv6 routing code.
APIs to add dst cache, delete dst cache, find dst cache and update
dst cache in the hash table are implemented and will be used in later
commits.
This is a preparation work to move all cache routes into the exception
table instead of getting inserted into the fib6 tree.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This function takes a route as input and tries to update the sernum in
the fib6_node this route is associated with. It will be used in later
commit when adding a cached route into the exception table under that
route.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using a linear list to store all skbs in write queue has been okay
for quite a while : O(N) is not too bad when N < 500.
Things get messy when N is the order of 100,000 : Modern TCP stacks
want 10Gbit+ of throughput even with 200 ms RTT flows.
40 ns per cache line miss means a full scan can use 4 ms,
blowing away CPU caches.
SACK processing often can use various hints to avoid parsing
whole retransmit queue. But with high packet losses and/or high
reordering, hints no longer work.
Sender has to process thousands of unfriendly SACK, accumulating
a huge socket backlog, burning a cpu and massively dropping packets.
Using an rb-tree for retransmit queue has been avoided for years
because it added complexity and overhead, but now is the time
to be more resistant and say no to quadratic behavior.
1) RTX queue is no longer part of the write queue : already sent skbs
are stored in one rb-tree.
2) Since reaching the head of write queue no longer needs
sk->sk_send_head, we added an union of sk_send_head and tcp_rtx_queue
Tested:
On receiver :
netem on ingress : delay 150ms 200us loss 1
GRO disabled to force stress and SACK storms.
for f in `seq 1 10`
do
./netperf -H lpaa6 -l30 -- -K bbr -o THROUGHPUT|tail -1
done | awk '{print $0} {sum += $0} END {printf "%7u\n",sum}'
Before patch :
323.87
351.48
339.59
338.62
306.72
204.07
304.93
291.88
202.47
176.88
2840
After patch:
1700.83
2207.98
2070.17
1544.26
2114.76
2124.89
1693.14
1080.91
2216.82
1299.94
18053
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
No need to recompute previous skb, as it will be a bit more
expensive when rtx queue is converted to RB tree.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With upcoming rb-tree implementation, the checks will trigger
more often, and this is expected.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It will be a bit more expensive to get the head of rtx queue
once rtx queue is converted to an rb-tree.
We can avoid this extra cost in case tp->lost_skb_hint is set.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the upcoming rtx rbtree will add some extra code,
it is time to not inline this fat function anymore.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Geeralize private netem_rb_to_skb()
TCP rtx queue will soon be converted to rb-tree,
so we will need skb_rbtree_walk() helpers.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- bump version strings, by Simon Wunderlich
- Cleanup patches to make checkpatch happy, by Sven Eckelmann (3 patches)
-----BEGIN PGP SIGNATURE-----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=7hcv
-----END PGP SIGNATURE-----
Merge tag 'batadv-next-for-davem-20171006' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- Cleanup patches to make checkpatch happy, by Sven Eckelmann (3 patches)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
commit cc71b7b071 ("net/ipv6: remove unused err variable on
icmpv6_push_pending_frames") exposed icmpv6_push_pending_frames
return value not being used.
Remove now unnecessary int err declarations and uses.
Miscellanea:
o Remove unnecessary goto and out: labels
o Realign arguments
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
int err is unused by icmpv6_push_pending_frames(), this patch returns removes the variable and returns the function with 0.
git bisect shows this variable has been around since linux has been in git in commit 1da177e4c3.
This was found by running make coccicheck M=net/ipv6/ on linus' tree on commit 77ede3a014 (current HEAD as of this patch).
Signed-off-by: Tim Hansen <devtimhansen@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Storing the left length of skb into 'len' actually has no effect
so we can remove it.
Signed-off-by: Lin Zhang <xiaolou4617@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Refactor the RACK loop to improve readability and speed up the checks.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the new time-ordered list to speed up RACK. The detection
logic is identical. But since the list is chronologically ordered
by skb_mstamp and contains only skbs not yet acked or sacked,
RACK can abort the loop upon hitting skbs that were sent more
recently. On YouTube servers this patch reduces the iterations on
write queue by 40x. The improvement is even bigger with large
BDP networks.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a new queue (list) that tracks the sent but not yet
acked or SACKed skbs for a TCP connection. The list is chronologically
ordered by skb->skb_mstamp (the head is the oldest sent skb).
This list will be used to optimize TCP Rack recovery, which checks
an skb's timestamp to judge if it has been lost and needs to be
retransmitted. Since TCP write queue is ordered by sequence instead
of sent time, RACK has to scan over the write queue to catch all
eligible packets to detect lost retransmission, and iterates through
SACKed skbs repeatedly.
Special cares for rare events:
1. TCP repair fakes skb transmission so the send queue needs adjusted
2. SACK reneging would require re-inserting SACKed skbs into the
send queue. For now I believe it's not worth the complexity to
make RACK work perfectly on SACK reneging, so we do nothing here.
3. Fast Open: currently for non-TFO, send-queue correctly queues
the pure SYN packet. For TFO which queues a pure SYN and
then a data packet, send-queue only queues the data packet but
not the pure SYN due to the structure of TFO code. This is okay
because the SYN receiver would never respond with a SACK on a
missing SYN (i.e. SYN is never fast-retransmitted by SACK/RACK).
In order to not grow sk_buff, we use an union for the new list and
_skb_refdst/destructor fields. This is a bit complicated because
we need to make sure _skb_refdst and destructor are properly zeroed
before skb is cloned/copied at transmit, and before being freed.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use max_1m_mrs/max_8k_mrs while setting max_items, as the former
variables are set based on the underlying device attributes.
Signed-off-by: Avinash Repaka <avinash.repaka@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes the scope of has_fr and has_fmr variables as they are
needed only in rds_ib_add_one().
Signed-off-by: Avinash Repaka <avinash.repaka@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
int rc is unmodified after initalization in net/ipv4/route.c, this patch simply cleans up that variable and returns 0.
This was found with coccicheck M=net/ipv4/ on linus' tree.
Signed-off-by: Tim Hansen <devtimhansen@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit does a cleanup and moves tcp_rearm_rto() call in the TFO
server case into a previous spot in tcp_rcv_state_process() to make
it more compact.
This is only a cosmetic change.
Suggested-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently in the TCP code, the initialization sequence for cached
metrics, congestion control, BPF, etc, after successful connection
is very inconsistent. This introduces inconsistent bevhavior and is
prone to bugs. The current call sequence is as follows:
(1) for active case (tcp_finish_connect() case):
tcp_mtup_init(sk);
icsk->icsk_af_ops->rebuild_header(sk);
tcp_init_metrics(sk);
tcp_call_bpf(sk, BPF_SOCK_OPS_ACTIVE_ESTABLISHED_CB);
tcp_init_congestion_control(sk);
tcp_init_buffer_space(sk);
(2) for passive case (tcp_rcv_state_process() TCP_SYN_RECV case):
icsk->icsk_af_ops->rebuild_header(sk);
tcp_call_bpf(sk, BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB);
tcp_init_congestion_control(sk);
tcp_mtup_init(sk);
tcp_init_buffer_space(sk);
tcp_init_metrics(sk);
(3) for TFO passive case (tcp_fastopen_create_child()):
inet_csk(child)->icsk_af_ops->rebuild_header(child);
tcp_init_congestion_control(child);
tcp_mtup_init(child);
tcp_init_metrics(child);
tcp_call_bpf(child, BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB);
tcp_init_buffer_space(child);
This commit uniforms the above functions to have the following sequence:
tcp_mtup_init(sk);
icsk->icsk_af_ops->rebuild_header(sk);
tcp_init_metrics(sk);
tcp_call_bpf(sk, BPF_SOCK_OPS_ACTIVE/PASSIVE_ESTABLISHED_CB);
tcp_init_congestion_control(sk);
tcp_init_buffer_space(sk);
This sequence is the same as the (1) active case. We pick this sequence
because this order correctly allows BPF to override the settings
including congestion control module and initial cwnd, etc from
the route, and then allows the CC module to see those settings.
Suggested-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the sock_diag interface for querying sockets from
userspace. Tools like ss(8) and netstat(8) can use this interface to
list open sockets.
The userspace ABI is defined in <linux/vm_sockets_diag.h> and includes
netlink request and response structs. The request can query sockets
based on their sk_state (e.g. listening sockets only) and the response
contains socket information fields including the local/remote addresses,
inode number, etc.
This patch does not dump VMCI pending sockets because I have only tested
the virtio transport, which does not use pending sockets. Support can
be added later by extending vsock_diag_dump() if needed by VMCI users.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are two state fields: socket->state and sock->sk_state. The
socket->state field uses SS_UNCONNECTED, SS_CONNECTED, etc while the
sock->sk_state typically uses values that match TCP state constants
(TCP_CLOSE, TCP_ESTABLISHED). AF_VSOCK does not follow this convention
and instead uses SS_* constants for both fields.
The sk_state field will be exposed to userspace through the vsock_diag
interface for ss(8), netstat(8), and other programs.
This patch switches sk_state to TCP state constants so that the meaning
of this field is consistent with other address families. Not just
AF_INET and AF_INET6 use the TCP constants, AF_UNIX and others do too.
The following mapping was used to convert the code:
SS_FREE -> TCP_CLOSE
SS_UNCONNECTED -> TCP_CLOSE
SS_CONNECTING -> TCP_SYN_SENT
SS_CONNECTED -> TCP_ESTABLISHED
SS_DISCONNECTING -> TCP_CLOSING
VSOCK_SS_LISTEN -> TCP_LISTEN
In __vsock_create() the sk_state initialization was dropped because
sock_init_data() already initializes sk_state to TCP_CLOSE.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The vsock_diag.ko module will need to check socket table membership.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The socket table symbols need to be exported from vsock.ko so that the
vsock_diag.ko module will be able to traverse sockets.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Check iwlwifi 9000 reorder buffer out-of-space condition properly,
from Sara Sharon.
2) Fix RCU splat in qualcomm rmnet driver, from Subash Abhinov
Kasiviswanathan.
3) Fix session and tunnel release races in l2tp, from Guillaume Nault
and Sabrina Dubroca.
4) Fix endian bug in sctp_diag_dump(), from Dan Carpenter.
5) Several mlx5 driver fixes from the Mellanox folks (max flow counters
cap check, invalid memory access in IPoIB support, etc.)
6) tun_get_user() should bail if skb->len is zero, from Alexander
Potapenko.
7) Fix RCU lookups in inetpeer, from Eric Dumazet.
8) Fix locking in packet_do_bund().
9) Handle cb->start() error properly in netlink dump code, from Jason
A. Donenfeld.
10) Handle multicast properly in UDP socket early demux code. From Paolo
Abeni.
11) Several erspan bug fixes in ip_gre, from Xin Long.
12) Fix use-after-free in socket filter code, in order to handle the
fact that listener lock is no longer taken during the three-way TCP
handshake. From Eric Dumazet.
13) Fix infoleak in RTM_GETSTATS, from Nikolay Aleksandrov.
14) Fix tail call generation in x86-64 BPF JIT, from Alexei Starovoitov.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (77 commits)
net: 8021q: skip packets if the vlan is down
bpf: fix bpf_tail_call() x64 JIT
net: stmmac: dwmac-rk: Add RK3128 GMAC support
rndis_host: support Novatel Verizon USB730L
net: rtnetlink: fix info leak in RTM_GETSTATS call
socket, bpf: fix possible use after free
mlxsw: spectrum_router: Track RIF of IPIP next hops
mlxsw: spectrum_router: Move VRF refcounting
net: hns3: Fix an error handling path in 'hclge_rss_init_hw()'
net: mvpp2: Fix clock resource by adding an optional bus clock
r8152: add Linksys USB3GIGV1 id
l2tp: fix l2tp_eth module loading
ip_gre: erspan device should keep dst
ip_gre: set tunnel hlen properly in erspan_tunnel_init
ip_gre: check packet length and mtu correctly in erspan_xmit
ip_gre: get key from session_id correctly in erspan_rcv
tipc: use only positive error codes in messages
ppp: fix __percpu annotation
udp: perform source validation for mcast early demux
IPv4: early demux can return an error code
...
Pass extack arg to br_add_if. Add messages for a couple of failures
and pass arg to netdev_master_upper_dev_link.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add extack arg to netdev_upper_dev_link and netdev_master_upper_dev_link
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass extack to do_set_master and down to ndo_add_slave
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
