Patch series "Expose task pid_ns_for_children to userspace".
pid_ns_for_children set by a task is known only to the task itself, and
it's impossible to identify it from outside.
It's a big problem for checkpoint/restore software like CRIU, because it
can't correctly handle tasks, that do setns(CLONE_NEWPID) in proccess of
their work. If they have a custom pid_ns_for_children before dump, they
must have the same ns after restore. Otherwise, restored task bumped
into enviroment it does not expect.
This patchset solves the problem. It exposes pid_ns_for_children to ns
directory in standard way with the name "pid_for_children":
~# ls /proc/5531/ns -l | grep pid
lrwxrwxrwx 1 root root 0 Jan 14 16:38 pid -> pid:[4026531836]
lrwxrwxrwx 1 root root 0 Jan 14 16:38 pid_for_children -> pid:[4026532286]
This patch (of 2):
Make possible to have link content prefix yyy different from the link
name xxx:
$ readlink /proc/[pid]/ns/xxx
yyy:[4026531838]
This will be used in next patch.
Link: http://lkml.kernel.org/r/149201120318.6007.7362655181033883000.stgit@localhost.localdomain
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Andrei Vagin <avagin@virtuozzo.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrey reported a use-after-free in __ns_get_path():
spin_lock include/linux/spinlock.h:299 [inline]
lockref_get_not_dead+0x19/0x80 lib/lockref.c:179
__ns_get_path+0x197/0x860 fs/nsfs.c:66
open_related_ns+0xda/0x200 fs/nsfs.c:143
sock_ioctl+0x39d/0x440 net/socket.c:1001
vfs_ioctl fs/ioctl.c:45 [inline]
do_vfs_ioctl+0x1bf/0x1780 fs/ioctl.c:685
SYSC_ioctl fs/ioctl.c:700 [inline]
SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691
We are under rcu read lock protection at that point:
rcu_read_lock();
d = atomic_long_read(&ns->stashed);
if (!d)
goto slow;
dentry = (struct dentry *)d;
if (!lockref_get_not_dead(&dentry->d_lockref))
goto slow;
rcu_read_unlock();
but don't use a proper RCU API on the free path, therefore a parallel
__d_free() could free it at the same time. We need to mark the stashed
dentry with DCACHE_RCUACCESS so that __d_free() will be called after all
readers leave RCU.
Fixes: e149ed2b80 ("take the targets of /proc/*/ns/* symlinks to separate fs")
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I'd like to write code that discovers the user namespace hierarchy on a
running system, and also shows who owns the various user namespaces.
Currently, there is no way of getting the owner UID of a user namespace.
Therefore, this patch adds a new NS_GET_CREATOR_UID ioctl() that fetches
the UID (as seen in the user namespace of the caller) of the creator of
the user namespace referred to by the specified file descriptor.
If the supplied file descriptor does not refer to a user namespace,
the operation fails with the error EINVAL. If the owner UID does
not have a mapping in the caller's user namespace return the
overflow UID as that appears easier to deal with in practice
in user-space applications.
-- EWB Changed the handling of unmapped UIDs from -EOVERFLOW
back to the overflow uid. Per conversation with
Michael Kerrisk after examining his test code.
Acked-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Michael Kerrisk <mtk-manpages@gmail.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Linux 4.9 added two ioctl() operations that can be used to discover:
* the parental relationships for hierarchical namespaces (user and PID)
[NS_GET_PARENT]
* the user namespaces that owns a specified non-user-namespace
[NS_GET_USERNS]
For no good reason that I can glean, NS_GET_USERNS was made synonymous
with NS_GET_PARENT for user namespaces. It might have been better if
NS_GET_USERNS had returned an error if the supplied file descriptor
referred to a user namespace, since it suggests that the caller may be
confused. More particularly, if it had generated an error, then I wouldn't
need the new ioctl() operation proposed here. (On the other hand, what
I propose here may be more generally useful.)
I would like to write code that discovers namespace relationships for
the purpose of understanding the namespace setup on a running system.
In particular, given a file descriptor (or pathname) for a namespace,
N, I'd like to obtain the corresponding user namespace. Namespace N
might be a user namespace (in which case my code would just use N) or
a non-user namespace (in which case my code will use NS_GET_USERNS to
get the user namespace associated with N). The problem is that there
is no way to tell the difference by looking at the file descriptor
(and if I try to use NS_GET_USERNS on an N that is a user namespace, I
get the parent user namespace of N, which is not what I want).
This patch therefore adds a new ioctl(), NS_GET_NSTYPE, which, given
a file descriptor that refers to a user namespace, returns the
namespace type (one of the CLONE_NEW* constants).
Signed-off-by: Michael Kerrisk <mtk-manpages@gmail.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Each socket operates in a network namespace where it has been created,
so if we want to dump and restore a socket, we have to know its network
namespace.
We have a socket_diag to get information about sockets, it doesn't
report sockets which are not bound or connected.
This patch introduces a new socket ioctl, which is called SIOCGSKNS
and used to get a file descriptor for a socket network namespace.
A task must have CAP_NET_ADMIN in a target network namespace to
use this ioctl.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull more vfs updates from Al Viro:
">rename2() work from Miklos + current_time() from Deepa"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: Replace current_fs_time() with current_time()
fs: Replace CURRENT_TIME_SEC with current_time() for inode timestamps
fs: Replace CURRENT_TIME with current_time() for inode timestamps
fs: proc: Delete inode time initializations in proc_alloc_inode()
vfs: Add current_time() api
vfs: add note about i_op->rename changes to porting
fs: rename "rename2" i_op to "rename"
vfs: remove unused i_op->rename
fs: make remaining filesystems use .rename2
libfs: support RENAME_NOREPLACE in simple_rename()
fs: support RENAME_NOREPLACE for local filesystems
ncpfs: fix unused variable warning
CURRENT_TIME macro is not appropriate for filesystems as it
doesn't use the right granularity for filesystem timestamps.
Use current_time() instead.
CURRENT_TIME is also not y2038 safe.
This is also in preparation for the patch that transitions
vfs timestamps to use 64 bit time and hence make them
y2038 safe. As part of the effort current_time() will be
extended to do range checks. Hence, it is necessary for all
file system timestamps to use current_time(). Also,
current_time() will be transitioned along with vfs to be
y2038 safe.
Note that whenever a single call to current_time() is used
to change timestamps in different inodes, it is because they
share the same time granularity.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Felipe Balbi <balbi@kernel.org>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: David Sterba <dsterba@suse.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Move mntget from the very beginning of __ns_get_path to
the success path of __ns_get_path, and remove the mntget
calls.
This removes the possibility that there will be a mntget/mntput
pair of __ns_get_path has to retry, and generally simplifies the code.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Pid and user namepaces are hierarchical. There is no way to discover
parent-child relationships.
In a future we will use this interface to dump and restore nested
namespaces.
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Each namespace has an owning user namespace and now there is not way
to discover these relationships.
Understending namespaces relationships allows to answer the question:
what capability does process X have to perform operations on a resource
governed by namespace Y?
After a long discussion, Eric W. Biederman proposed to use ioctl-s for
this purpose.
The NS_GET_USERNS ioctl returns a file descriptor to an owning user
namespace.
It returns EPERM if a target namespace is outside of a current user
namespace.
v2: rename parent to relative
v3: Add a missing mntput when returning -EAGAIN --EWB
Acked-by: Serge Hallyn <serge@hallyn.com>
Link: https://lkml.org/lkml/2016/7/6/158
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
The seq_<foo> function return values were frequently misused.
See: commit 1f33c41c03 ("seq_file: Rename seq_overflow() to
seq_has_overflowed() and make public")
All uses of these return values have been removed, so convert the
return types to void.
Miscellanea:
o Move seq_put_decimal_<type> and seq_escape prototypes closer the
other seq_vprintf prototypes
o Reorder seq_putc and seq_puts to return early on overflow
o Add argument names to seq_vprintf and seq_printf
o Update the seq_escape kernel-doc
o Convert a couple of leading spaces to tabs in seq_escape
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Today mountinfo displays a very unhelpful "/" for nsfs files. Add a
show_path method returning the same string as ns_dname. This results
in a bind mount of /proc/<pid>/ns/net showing up in /proc/<pid>/mountinfo as
"net:[1234...]" instead of "/".
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
New pseudo-filesystem: nsfs. Targets of /proc/*/ns/* live there now.
It's not mountable (not even registered, so it's not in /proc/filesystems,
etc.). Files on it *are* bindable - we explicitly permit that in do_loopback().
This stuff lives in fs/nsfs.c now; proc_ns_fget() moved there as well.
get_proc_ns() is a macro now (it's simply returning ->i_private; would
have been an inline, if not for header ordering headache).
proc_ns_inode() is an ex-parrot. The interface used in procfs is
ns_get_path(path, task, ops) and ns_get_name(buf, size, task, ops).
Dentries and inodes are never hashed; a non-counting reference to dentry
is stashed in ns_common (removed by ->d_prune()) and reused by ns_get_path()
if present. See ns_get_path()/ns_prune_dentry/nsfs_evict() for details
of that mechanism.
As the result, proc_ns_follow_link() has stopped poking in nd->path.mnt;
it does nd_jump_link() on a consistent <vfsmount,dentry> pair it gets
from ns_get_path().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
