Fix the following sparse warning:
fs/fuse/file.c:2249:6: warning: symbol 'fuse_file_fallocate' was not declared. Should it be static?
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Given that CUSE depends on FUSE, it only makes sense to move its
Kconfig entry into the FUSE Kconfig file. Also, add a few grammatical
and semantic touchups.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Fix the following compiler warnings:
fs/fuse/cuse.c: In function 'cuse_process_init_reply':
fs/fuse/cuse.c:288:24: warning: 'val' may be used uninitialized in this function [-Wmaybe-uninitialized]
fs/fuse/cuse.c:272:14: note: 'val' was declared here
fs/fuse/cuse.c:284:10: warning: 'key' may be used uninitialized in this function [-Wmaybe-uninitialized]
fs/fuse/cuse.c:272:8: note: 'key' was declared here
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Sysfs doesn't allow two devices with the same name, but we register a
sysfs entry for each cuse device without checking for name collisions.
This extends the registration to first check whether the name was already
registered.
To avoid race-conditions between the name-check and linking the device, we
need to protect the whole registration with a mutex.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
We need to check for name-collisions during cuse-device registration. To
avoid race-conditions, this needs to be protected during the whole device
registration. Therefore, replace the spinlocks by mutexes first so we can
safely extend the locked regions to include more expensive or sleeping
code paths.
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
The gpio_chip.label field is a const char * and assigned the value of a
call to dev_name(). Memory obtained from dev_name() should not be freed
by drivers.
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Since exynos5440 can support pinctrl so skip the legacy
gpiolib registration. If not, happens following.
WARNING: at drivers/gpio/gpio-samsung.c:3102 samsung_gpiolib_init+0x68/0x8c()
Unknown SoC in gpio-samsung, no GPIOs added
Acked-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We stopped reading FORCEWAKE for posting reads in
commit 8dee3eea3c
Author: Ben Widawsky <ben@bwidawsk.net>
Date: Sat Sep 1 22:59:50 2012 -0700
drm/i915: Never read FORCEWAKE
and started using something from the same cacheline instead. On the
bug reporter's machine this broke entering rc6 states after a
suspend/resume cycle. It turns out reading ECOBUS as posting read
worked fine, while GTFIFODBG did not, preventing RC6 states after
suspend/resume per the bug report referenced below. It's not entirely
clear why, but clearly GTFIFODBG was nowhere near the same cacheline
or address range as FORCEWAKE.
Trying out various registers for posting reads showed that all tested
registers for which NEEDS_FORCE_WAKE() (in i915_drv.c) returns true
work. Conversely, most (but not quite all) registers for which
NEEDS_FORCE_WAKE() returns false do not work. Details in the referenced
bug.
Based on the above, add posting reads on ECOBUS where GTFIFODBG was
previously relied on.
In true cargo cult spirit, add posting reads for FORCEWAKE_VLV writes as
well, but instead of ECOBUS, use FORCEWAKE_ACK_VLV which is in the same
address range as FORCEWAKE_VLV.
v2: Add more details to the commit message. No functional changes.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52411
Reported-and-tested-by: Alexander Bersenev <bay@hackerdom.ru>
CC: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
[danvet: add cc: stable and make the commit message a bit clearer that
this is a regression fix and what exactly broke.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch fixes following warning:
drivers/gpio/gpio-samsung.c:450:32: warning: 'exynos_gpio_cfg' defined but not used [-Wunused-variable]
drivers/gpio/gpio-samsung.c:2450:33: warning: 'exynos5_gpios_1' defined but not used [-Wunused-variable]
drivers/gpio/gpio-samsung.c:2618:33: warning: 'exynos5_gpios_2' defined but not used [-Wunused-variable]
drivers/gpio/gpio-samsung.c:2679:33: warning: 'exynos5_gpios_3' defined but not used [-Wunused-variable]
drivers/gpio/gpio-samsung.c:2715:33: warning: 'exynos5_gpios_4' defined but not used [-Wunused-variable]
Because current gpio-samsung is valid only on EXYNOS5250.
Cc: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Since EXYNOS5440 can select PINCTRL_EXYNOS5440 without PINCTRL_SAMSUNG,
it should be fixed. In detail, PINCTRL_SAMSUNG is a kind of frame work
for supporting pinctrl on most Samsung SoCs including S3C, S5P as well
except EXYNOS5440 so PINCTRL_EXYNOS5440 has been implemented separated.
Cc: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Issuing a "reboot" command after the LCD times out causes the following
warnings:
Requesting system reboot
------------[ cut here ]------------
WARNING: at drivers/clk/clk.c:471 clk_disable+0x24/0x50()
Modules linked in:
[<c001ad90>] (unwind_backtrace+0x0/0xf4) from [<c0025aac>] (warn_slowpath_common+0x48/0x60)
[<c0025aac>] (warn_slowpath_common+0x48/0x60) from [<c0025ae0>] (warn_slowpath_null+0x1c/0x24)
[<c0025ae0>] (warn_slowpath_null+0x1c/0x24) from [<c03960a0>] (clk_disable+0x24/0x50)
[<c03960a0>] (clk_disable+0x24/0x50) from [<c02695a0>] (imxfb_disable_controller+0x48/0x7c)
[<c02695a0>] (imxfb_disable_controller+0x48/0x7c) from [<c029d838>] (platform_drv_shutdown+0x18/0x1c)
[<c029d838>] (platform_drv_shutdown+0x18/0x1c) from [<c02990fc>] (device_shutdown+0x48/0x14c)
[<c02990fc>] (device_shutdown+0x48/0x14c) from [<c003d09c>] (kernel_restart_prepare+0x2c/0x3c)
[<c003d09c>] (kernel_restart_prepare+0x2c/0x3c) from [<c003d0e4>] (kernel_restart+0xc/0x48)
[<c003d0e4>] (kernel_restart+0xc/0x48) from [<c003d1e8>] (sys_reboot+0xc0/0x1bc)
[<c003d1e8>] (sys_reboot+0xc0/0x1bc) from [<c0014ca0>] (ret_fast_syscall+0x0/0x2c)
---[ end trace da6b502ca79c854f ]---
------------[ cut here ]------------
WARNING: at drivers/clk/clk.c:380 clk_unprepare+0x1c/0x2c()
Modules linked in:
[<c001ad90>] (unwind_backtrace+0x0/0xf4) from [<c0025aac>] (warn_slowpath_common+0x48/0x60)
[<c0025aac>] (warn_slowpath_common+0x48/0x60) from [<c0025ae0>] (warn_slowpath_null+0x1c/0x24)
[<c0025ae0>] (warn_slowpath_null+0x1c/0x24) from [<c0396338>] (clk_unprepare+0x1c/0x2c)
[<c0396338>] (clk_unprepare+0x1c/0x2c) from [<c02695a8>] (imxfb_disable_controller+0x50/0x7c)
[<c02695a8>] (imxfb_disable_controller+0x50/0x7c) from [<c029d838>] (platform_drv_shutdown+0x18/0x1c)
[<c029d838>] (platform_drv_shutdown+0x18/0x1c) from [<c02990fc>] (device_shutdown+0x48/0x14c)
[<c02990fc>] (device_shutdown+0x48/0x14c) from [<c003d09c>] (kernel_restart_prepare+0x2c/0x3c)
[<c003d09c>] (kernel_restart_prepare+0x2c/0x3c) from [<c003d0e4>] (kernel_restart+0xc/0x48)
[<c003d0e4>] (kernel_restart+0xc/0x48) from [<c003d1e8>] (sys_reboot+0xc0/0x1bc)
[<c003d1e8>] (sys_reboot+0xc0/0x1bc) from [<c0014ca0>] (ret_fast_syscall+0x0/0x2c)
---[ end trace da6b502ca79c8550 ]---
------------[ cut here ]------------
This happens because "reboot" triggers imxfb_shutdown(), which calls
imxfb_disable_controller with the clocks already disabled.
To prevent this, add a clock enabled status so that we can check if the clocks
are enabled before disabling them.
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
From Kukjin Kim:
That branch fixes build error for S3C24XX/S3C64xx. And corrects dw-mshc
properties on EXYNOS5 DT and fixes IRQ mapping on Cragganmore board.
* 'v3.8-samsung-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: S3C64XX: Fix up IRQ mapping for balblair on Cragganmore
ARM: dts: correct the dw-mshc timing properties as per binding
ARM: S3C64XX: Fix build error with CONFIG_S3C_DEV_FB disabled
+ Linux 3.8-rc3
Signed-off-by: Olof Johansson <olof@lixom.net>
- fix(es) for compound buffers
- fix for dquot soft timer asserts due to overflow of d_blk_softlimit
- fix for regression in dir v2 code introduced in commit 20f7e9f3
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=gA4q
-----END PGP SIGNATURE-----
Merge tag 'for-linus-v3.8-rc4' of git://oss.sgi.com/xfs/xfs
Pull xfs bugfixes from Ben Myers:
- fix(es) for compound buffers
- fix for dquot soft timer asserts due to overflow of d_blk_softlimit
- fix for regression in dir v2 code introduced in commit 20f7e9f372
("xfs: factor dir2 block read operations")
* tag 'for-linus-v3.8-rc4' of git://oss.sgi.com/xfs/xfs:
xfs: recalculate leaf entry pointer after compacting a dir2 block
xfs: remove int casts from debug dquot soft limit timer asserts
xfs: fix the multi-segment log buffer format
xfs: fix segment in xfs_buf_item_format_segment
xfs: rename bli_format to avoid confusion with bli_formats
xfs: use b_maps[] for discontiguous buffers
We are using S3C_EINT(4) instead of S3C_EINT(5).
Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
As per the current exynos-dw-mshc bindings, dw-mshc-sdr-timing and
dw-mshc-ddr-timing properties are having only two cells, these properties
are wrongly set for exynos5250 based cros5250 and smdk5250 platfroms. This
patch corrects above timing propreties for above platfroms
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Tested-by: Doug Anderson <dianders@chromium.org>
Acked-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
If there is no board selecting CONFIG_S3C_DEV_FB enabled, build will
fail on arch/arm/mach-s3c64xx/pm.c, where s3c_device_fb is referenced.
This patch adds ifdef guard around the code making it compile only
when CONFIG_S3C_DEV_FB is enabled.
Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
* cpuidle initialization regression fix from Krzysztof Mazur.
* cpuidle fix for power usage fields handling from Daniel Lezcano.
* ACPI build fix from Yinghai Lu.
-
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=4ifX
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-for-3.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management fixes from Rafael Wysocki:
- cpuidle regression fix related to the initialization of state
kobjects from Krzysztof Mazur.
- cpuidle fix removing some not very useful code and making some
user-visible problems go away at the same time. From Daniel Lezcano.
- ACPI build fix from Yinghai Lu.
* tag 'pm+acpi-for-3.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: remove the power_specified field in the driver
ACPI / glue: Fix build with ACPI_GLUE_DEBUG set
cpuidle: fix number of initialized/destroyed states
debug_ll_addr is only used on machines with an MMU so it can be #ifdef'ed
out safely. This fixes:
arch/arm/kernel/debug.S: Assembler messages:
arch/arm/kernel/debug.S:104: Error: too many positional arguments
The problem was introduced in e5c5f2a ARM: implement debug_ll_io_init().
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Dave Jones hit this assert when doing a compile on recent git, with
CONFIG_XFS_DEBUG enabled:
XFS: Assertion failed: (char *)dup - (char *)hdr == be16_to_cpu(*xfs_dir2_data_unused_tag_p(dup)), file: fs/xfs/xfs_dir2_data.c, line: 828
Upon further digging, the tag found by xfs_dir2_data_unused_tag_p(dup)
contained "2" and not the proper offset, and I found that this value was
changed after the memmoves under "Use a stale leaf for our new entry."
in xfs_dir2_block_addname(), i.e.
memmove(&blp[mid + 1], &blp[mid],
(highstale - mid) * sizeof(*blp));
overwrote it.
What has happened is that the previous call to xfs_dir2_block_compact()
has rearranged things; it changes btp->count as well as the
blp array. So after we make that call, we must recalculate the
proper pointer to the leaf entries by making another call to
xfs_dir2_block_leaf_p().
Dave provided a metadump image which led to a simple reproducer
(create a particular filename in the affected directory) and this
resolves the testcase as well as the bug on his live system.
Thanks also to dchinner for looking at this one with me.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Tested-by: Dave Jones <davej@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The int casts here make it easy to trigger an assert with a large
soft limit. For example, set a >4TB soft limit on an empty volume
to reproduce a (0 > -x) comparison due to an overflow of
d_blk_softlimit.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Per Dave Chinner suggestion, this patch:
1) Corrects the detection of whether a multi-segment buffer is
still tracking data.
2) Clears all the buffer log formats for a multi-segment buffer.
Signed-off-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Not every segment in a multi-segment buffer is dirty in a
transaction and they will not be outputted. The assert in
xfs_buf_item_format_segment() that checks for the at least
one chunk of data in the segment to be used is not necessary
true for multi-segmented buffers.
Signed-off-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Rename the bli_format structure to __bli_format to avoid
accidently confusing them with the bli_formats pointer.
Signed-off-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Commits starting at 77c1a08 introduced a multiple segment support
to xfs_buf. xfs_trans_buf_item_match() could not find a multi-segment
buffer in the transaction because it was looking at the single segment
block number rather than the multi-segment b_maps[0].bm.bn. This
results on a recursive buffer lock that can never be satisfied.
This patch:
1) Changed the remaining b_map accesses to be b_maps[0] accesses.
2) Renames the single segment b_map structure to __b_map to avoid
future confusion.
Signed-off-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
This fixes CVE-2013-0190 / XSA-40
There has been an error on the xen_failsafe_callback path for failed
iret, which causes the stack pointer to be wrong when entering the
iret_exc error path. This can result in the kernel crashing.
In the classic kernel case, the relevant code looked a little like:
popl %eax # Error code from hypervisor
jz 5f
addl $16,%esp
jmp iret_exc # Hypervisor said iret fault
5: addl $16,%esp
# Hypervisor said segment selector fault
Here, there are two identical addls on either option of a branch which
appears to have been optimised by hoisting it above the jz, and
converting it to an lea, which leaves the flags register unaffected.
In the PVOPS case, the code looks like:
popl_cfi %eax # Error from the hypervisor
lea 16(%esp),%esp # Add $16 before choosing fault path
CFI_ADJUST_CFA_OFFSET -16
jz 5f
addl $16,%esp # Incorrectly adjust %esp again
jmp iret_exc
It is possible unprivileged userspace applications to cause this
behaviour, for example by loading an LDT code selector, then changing
the code selector to be not-present. At this point, there is a race
condition where it is possible for the hypervisor to return back to
userspace from an interrupt, fault on its own iret, and inject a
failsafe_callback into the kernel.
This bug has been present since the introduction of Xen PVOPS support
in commit 5ead97c84 (xen: Core Xen implementation), in 2.6.23.
Signed-off-by: Frediano Ziglio <frediano.ziglio@citrix.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: stable@vger.kernel.org
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
In commit 281dc5c5ec ("Give up on pushing CC_OPTIMIZE_FOR_SIZE") we
already changed the actual default value, but the help-text still
suggested 'y'. Fix the help text too, for all the same reasons.
Sadly, -Os keeps on generating some very suboptimal code for certain
cases, to the point where any I$ miss upside is swamped by the downside.
The main ones are:
- using "rep movsb" for memcpy, even on CPU's where that is
horrendously bad for performance.
- not honoring branch prediction information, so any I$ footprint you
win from smaller code, you lose from less code density in the I$.
- using divide instructions when that is very expensive.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix the build error:
drivers/built-in.o: In function `twl_probe':
drivers/mfd/twl-core.c:1256: undefined reference to `devm_regmap_init_i2c'
make: *** [vmlinux] Error 1
Signed-off-by: liu chuansheng <chuansheng.liu@intel.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
[ Samuel is busy, taking it directly - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[ We should make fun of people who can't speel too, but then we'd have
no time for any real work at all - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iEYEABECAAYFAlD27roACgkQGxsu9jQV9nbc1ACeI8OXnmOgTE9dvO54e6PsEGV4
YtwAn0reO6wsjlK12fkGpM18HVFpEQzh
=vqps
-----END PGP SIGNATURE-----
Merge tag 'sunxi-fixes-for-3.8-rc4' of git://github.com/mripard/linux into fixes
From Maxime Ripard:
Sunxi dt fixes for 3.8-rc's
* tag 'sunxi-fixes-for-3.8-rc4' of git://github.com/mripard/linux:
ARM: sunxi: Use the Synosys APB UART instead of ns8250
Commit 1b963c81b1 ("lockdep, rwsem: provide down_write_nest_lock()")
contains a bug in a codepath when CONFIG_DEBUG_LOCK_ALLOC is disabled,
which causes down_read() to be called instead of down_write() by mistake
on such configurations. Fix that.
Reported-and-tested-by: Andrew Clayton <andrew@digital-domain.net>
Reported-and-tested-by: Zlatko Calusic <zlatko.calusic@iskon.hr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yet a few more fixes popped up in this week.
The biggest change here is the addition of pinctrl support for Atmel,
which turned out to be almost mandatory to make things working.
The rest are a few fixes for M-Audio usb-audio device and a fix for
regression of HD-audio HDMI codecs with alsactl in the recent kernel.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=Sd6n
-----END PGP SIGNATURE-----
Merge tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull second round of sound fixes from Takashi Iwai:
"Yet a few more fixes popped up in this week.
The biggest change here is the addition of pinctrl support for Atmel,
which turned out to be almost mandatory to make things working.
The rest are a few fixes for M-Audio usb-audio device and a fix for
regression of HD-audio HDMI codecs with alsactl in the recent kernel."
* tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/hdmi - Work around "alsactl restore" errors
ALSA: usb-audio: selector map for M-Audio FT C400
ALSA: usb-audio: M-Audio FT C400 skip packet quirk
ALSA: usb-audio: correct M-Audio C400 clock source quirk
ALSA: usb - fix race in creation of M-Audio Fast track pro driver
ASoC: atmel-ssc: add pinctrl selection to driver
ARM: at91/dts: add pinctrl support for SSC peripheral
Pull scsi target fixes from Nicholas Bellinger:
"This includes an important >= v3.6 regression bugfix for active I/O
shutdown (Roland), some TMR related failure / corner cases fixes for
long outstanding I/O (Roland), two FCoE target mode fabric fabric role
fixes (MDR), a fix for an incorrect sense code during LUN
communication failure (Dr. Hannes), plus a handful of other minor
fixes.
There are still some outstanding zero-length control CDB regression
fixes that need to be addressed for v3.8, that will be coming in a
follow-up PULL request."
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
iscsi-target: Fix CmdSN comparison (use cmd->cmd_sn instead of cmd->stat_sn)
target: Release se_cmd when LUN lookup fails for TMR
target: Fix use-after-free in LUN RESET handling
target: Fix missing CMD_T_ACTIVE bit regression for pending WRITEs
tcm_fc: Do not report target role when target is not defined
tcm_fc: Do not indicate retry capability to initiators
target: Use TCM_NO_SENSE for initialisation
target: Introduce TCM_NO_SENSE
target: use correct sense code for LUN communication failure
Pull ext3 and udf fixes from Jan Kara:
"One ext3 performance regression fix and one udf regression fix (oops
on interrupted mount)."
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
UDF: Fix a null pointer dereference in udf_sb_free_partitions
jbd: don't wake kjournald unnecessarily
The UART controller used in the A10/A13 is the Synopsys DesignWare 8250.
The wrong use of a regular 8250 driver may lead to a oops during kernel
boot with "irq 17: nobody cared", because the apb UART as an extra
interrupt that gets raised when writing to the LCR when busy.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Pull x86 fixes from Peter Anvin:
"This is mainly a workaround for a bug in Sandy Bridge graphics which
causes corruption of certain memory pages."
* 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/Sandy Bridge: Sandy Bridge workaround depends on CONFIG_PCI
x86/Sandy Bridge: mark arrays in __init functions as __initconst
x86/Sandy Bridge: reserve pages when integrated graphics is present
x86, efi: correct precedence of operators in setup_efi_pci
Timur Tabi no longer works for Freescale, so update the email address
and status for all of his maintained projects.
Also mark the QE library as orphaned, for lack of interest in
maintaining it.
The CS4270 driver is marked as "Odd Fixes" because appropriate hardware
is no longer available.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the requested firmware file size is 0 bytes in the filesytem, we
will try to vmalloc(0), which causes a warning:
vmalloc: allocation failure: 0 bytes
kworker/1:1: page allocation failure: order:0, mode:0xd2
__vmalloc_node_range+0x164/0x208
__vmalloc_node+0x4c/0x58
vmalloc+0x38/0x44
_request_firmware_load+0x220/0x6b0
request_firmware+0x64/0xc8
wl18xx_setup+0xb4/0x570 [wl18xx]
wlcore_nvs_cb+0x64/0x9f8 [wlcore]
request_firmware_work_func+0x94/0x100
process_one_work+0x1d0/0x750
worker_thread+0x184/0x4ac
kthread+0xb4/0xc0
To fix this, check whether the file size is less than or equal to zero
in fw_read_file_contents().
Cc: stable <stable@vger.kernel.org> [3.7]
Signed-off-by: Luciano Coelho <coelho@ti.com>
Acked-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the default iosched is built as module, the kernel may deadlock
while trying to load the iosched module on device probe if the probing
was running off async. This is because async_synchronize_full() at
the end of module init ends up waiting for the async job which
initiated the module loading.
async A modprobe
1. finds a device
2. registers the block device
3. request_module(default iosched)
4. modprobe in userland
5. load and init module
6. async_synchronize_full()
Async A waits for modprobe to finish in request_module() and modprobe
waits for async A to finish in async_synchronize_full().
Because there's no easy to track dependency once control goes out to
userland, implementing properly nested flushing is difficult. For
now, make module init perform async_synchronize_full() iff module init
has queued async jobs as suggested by Linus.
This avoids the described deadlock because iosched module doesn't use
async and thus wouldn't invoke async_synchronize_full(). This is
hacky and incomplete. It will deadlock if async module loading nests;
however, this works around the known problem case and seems to be the
best of bad options.
For more details, please refer to the following thread.
http://thread.gmane.org/gmane.linux.kernel/1420814
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Alex Riesen <raa.lkml@gmail.com>
Tested-by: Ming Lei <ming.lei@canonical.com>
Tested-by: Alex Riesen <raa.lkml@gmail.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We currently use a temporary 1MB section aligned to a 1MB boundary for
mapping the provided device tree until the final page table is created.
However, if the device tree happens to cross that 1MB boundary, the end
of it remains unmapped and the kernel crashes when it attempts to access
it. Given no restriction on the location of that DTB, it could end up
with only a few bytes mapped at the end of a section.
Solve this issue by mapping two consecutive sections.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Tomasz Figa <t.figa@samsung.com>
Cc: stable@vger.kernel.org
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Patrik Kluba reports that the preempt count becomes invalid due
to the preempt_enable() call being unbalanced with a
preempt_disable() call in the vfp assembly routines. This happens
because preempt_enable() and preempt_disable() update preempt
counts under PREEMPT_COUNT=y but the vfp assembly routines do so
under PREEMPT=y. In a configuration where PREEMPT=n and
DEBUG_ATOMIC_SLEEP=y, PREEMPT_COUNT=y and so the preempt_enable()
call in VFP_bounce() keeps subtracting from the preempt count
until it goes negative.
Fix this by always using PREEMPT_COUNT to decided when to update
preempt counts in the ARM assembly code.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Reported-by: Patrik Kluba <pkluba@dension.com>
Tested-by: Patrik Kluba <pkluba@dension.com>
Cc: <stable@vger.kernel.org> # 2.6.30
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
We don't want to bomb out early if we failed to get the cache any more,
just soldier on instead and we won't get confused and always return the
first block.
Reported-by: Philipp Zabel <p.zabel@pengutronix.de
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
cbc0dd1 "s390/pci: CHSC PCI support for error and availability events"
introduced a new SEI notification type as part of pci support.
The way SEI was called with nt2 and nt0 consecutive broke the nt0
stuff used for channel subsystem notifications.
The reason why this was broken with the mentioned patch is that you
cannot selectively disable type 0 notifications (so even when asked
for type 2 only, type 0 could be presented).
The way to do it is to tell SEI which types of notification you can
process and -this is the important part- look at the SEI result which
notification type you actually received.
Reviewed-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Tested-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Converting a 64 Bit TOD format value to nanoseconds means that the value
must be divided by 4.096. In order to achieve that we multiply with 125
and divide by 512.
When used within sched_clock() this triggers an overflow after appr.
417 days. Resulting in a sched_clock() return value that is much smaller
than previously and therefore may cause all sort of weird things in
subsystems that rely on a monotonic sched_clock() behaviour.
To fix this implement a tod_to_ns() helper function which converts TOD
values without overflow and call this function from both places that
open coded the conversion: sched_clock() and kvm_s390_handle_wait().
Cc: stable@kernel.org
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
In the slow path, we are forced to copy the relocations prior to
acquiring the struct mutex in order to handle pagefaults. We forgo
copying the new offsets back into the relocation entries in order to
prevent a recursive locking bug should we trigger a pagefault whilst
holding the mutex for the reservations of the execbuffer. Therefore, we
need to reset the presumed_offsets just in case the objects are rebound
back into their old locations after relocating for this exexbuffer - if
that were to happen we would assume the relocations were valid and leave
the actual pointers to the kernels dangling, instant hang.
Fixes regression from commit bcf50e2775
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Sun Nov 21 22:07:12 2010 +0000
drm/i915: Handle pagefaults in execbuffer user relocations
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55984
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@fwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
FSI - DA7210 needs amixer settings to use it.
This patch adds quick setting guide
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Some machines detect an eDP port even if it's not really there, and eDP
initialization has a fail path for this. Typically such machines have an
LVDS display instead. A regression introduced in
commit 82ed61fa1a
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Sat Oct 20 20:57:41 2012 +0200
drm/i915: make edp panel power sequence setup more robust
updated the power sequence registers PCH_PP_ON_DELAYS, PCH_PP_OFF_DELAYS,
and PCH_PP_DIVISOR also in the ghost eDP case, messing up the LVDS display.
Split the power sequencer initialization into two, delaying the register
updates until after we know the eDP is real.
Note: Keep the PP_CONTROL unlocking in the first part, even if it does not
update registers, per the commit message of the above mentioned commit.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=52601
Reported-and-tested-by: Ryan Coe <ryan@rycomotorsports.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
As protocol driver, IFX SPI driver initiate to setup SPI master with default
SPI word size as 16 bit/word, however, SPI master may not adopt this default
value due to SPI controller's capability, it might choose an available value by
itself and set it to spi_device.bits_per_word. In order to keep align with
Controller, IFX driver should make use of this value during SPI transfer,
but the default one.
Signed-off-by: Chen Jun <jun.d.chen@intel.com>
Signed-off-by: channing <chao.bi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
