Increase the log reservations to handle the increased rolling that
happens at the end of copy-on-write operations.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Trim CoW reservations made on behalf of a cowextsz hint if they get too
old or we run low on quota, so long as we don't have dirty data awaiting
writeback or directio operations in progress.
Garbage collection of the cowextsize extents are kept separate from
prealloc extent reaping because setting the CoW prealloc lifetime to a
(much) higher value than the regular prealloc extent lifetime has been
useful for combatting CoW fragmentation on VM hosts where the VMs
experience bursty write behaviors and we can keep the utilization ratios
low enough that we don't start to run out of space. IOWs, it benefits
us to keep the CoW fork reservations around for as long as we can unless
we run out of blocks or hit inode reclaim.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Prior to the introduction of reflink, allocating a block and mapping
it into a file was performed in a single transaction with a single
block reservation, and the allocator was supposed to find enough
blocks to allocate the extent and any BMBT blocks that might be
necessary (unless we're low on space).
However, due to the way copy on write works, allocation and mapping
have been split into two transactions, which means that we must be
able to handle the case where we allocate an extent for CoW but that
AG runs out of free space before the blocks can be mapped into a file,
and the mapping requires a new BMBT block. When this happens, look in
one of the other AGs for a BMBT block instead of taking the FS down.
The same applies to the functions that convert a data fork to extents
and later btree format.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
If the AG free space is down to the reserves, refuse to reflink our
way out of space. Hopefully userspace will make a real copy and/or go
elsewhere.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
To gracefully handle the situation where a CoW operation turns a
single refcount extent into a lot of tiny ones and then run out of
space when a tree split has to happen, use the per-AG reserved block
pool to pre-allocate all the space we'll ever need for a maximal
btree. For a 4K block size, this only costs an overhead of 0.3% of
available disk space.
When reflink is enabled, we have an unfortunate problem with rmap --
since we can share a block billions of times, this means that the
reverse mapping btree can expand basically infinitely. When an AG is
so full that there are no free blocks with which to expand the rmapbt,
the filesystem will shut down hard.
This is rather annoying to the user, so use the AG reservation code to
reserve a "reasonable" amount of space for rmap. We'll prevent
reflinks and CoW operations if we think we're getting close to
exhausting an AG's free space rather than shutting down, but this
permanent reservation should be enough for "most" users. Hopefully.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
[hch@lst.de: ensure that we invalidate the freed btree buffer]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Create a per-inode extent size allocator hint for copy-on-write. This
hint is separate from the existing extent size hint so that CoW can
take advantage of the fragmentation-reducing properties of extent size
hints without disabling delalloc for regular writes.
The extent size hint that's fed to the allocator during a copy on
write operation is the greater of the cowextsize and regular extsize
hint.
During reflink, if we're sharing the entire source file to the entire
destination file and the destination file doesn't already have a
cowextsize hint, propagate the source file's cowextsize hint to the
destination file.
Furthermore, zero the bulkstat buffer prior to setting the fields
so that we don't copy kernel memory contents into userspace.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Unshare all shared extents if the user calls fallocate with the new
unshare mode flag set, so that we can guarantee that a subsequent
write will not ENOSPC.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
[hch: pass inode instead of file to xfs_reflink_dirty_range,
use iomap infrastructure for copy up]
Signed-off-by: Christoph Hellwig <hch@lst.de>
When we're swapping the extents of two inodes, be sure to swap the
reflink inode flag too.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Teach xfs_getbmapx how to report shared extents and CoW fork contents
accurately in the bmap output by querying the refcount btree
appropriately.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Define a VFS function which allows userspace to request that the
kernel reflink a range of blocks between two files if the ranges'
contents match. The function fits the new VFS ioctl that standardizes
the checking for the btrfs EXTENT SAME ioctl.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Define two VFS functions which allow userspace to reflink a range of
blocks between two files or to reflink one file's contents to another.
These functions fit the new VFS ioctls that standardize the checking
for the btrfs CLONE and CLONE RANGE ioctls.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reflink extents from one file to another; that is to say, iteratively
remove the mappings from the destination file, copy the mappings from
the source file to the destination file, and increment the reference
count of all the blocks that got remapped.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Due to the way the CoW algorithm in XFS works, there's an interval
during which blocks allocated to handle a CoW can be lost -- if the FS
goes down after the blocks are allocated but before the block
remapping takes place. This is exacerbated by the cowextsz hint --
allocated reservations can sit around for a while, waiting to get
used.
Since the refcount btree doesn't normally store records with refcount
of 1, we can use it to record these in-progress extents. In-progress
blocks cannot be shared because they're not user-visible, so there
shouldn't be any conflicts with other programs. This is a better
solution than holding EFIs during writeback because (a) EFIs can't be
relogged currently, (b) even if they could, EFIs are bound by
available log space, which puts an unnecessary upper bound on how much
CoW we can have in flight, and (c) we already have a mechanism to
track blocks.
At mount time, read the refcount records and free anything we find
with a refcount of 1 because those were in-progress when the FS went
down.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
When destroying the inode, cancel all pending reservations in the CoW
fork so that all the reserved blocks go back to the free pile. In
theory this sort of cleanup is only needed to clean up after write
errors.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
When we're freeing blocks (truncate, punch, etc.), clear all CoW
reservations in the range being freed. If the file block count
drops to zero, also clear the inode reflink flag.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
For O_DIRECT writes to shared blocks, we have to CoW them just like
we would with buffered writes. For writes that are not block-aligned,
just bounce them to the page cache.
For block-aligned writes, however, we can do better than that. Use
the same mechanisms that we employ for buffered CoW to set up a
delalloc reservation, allocate all the blocks at once, issue the
writes against the new blocks and use the same ioend functions to
remap the blocks after the write. This should be fairly performant.
Christoph discovered that xfs_reflink_allocate_cow_range may stumble
over invalid entries in the extent array given that it drops the ilock
but still expects the index to be stable. Simple fixing it to a new
lookup for every iteration still isn't correct given that
xfs_bmapi_allocate will trigger a BUG_ON() if hitting a hole, and
there is nothing preventing a xfs_bunmapi_cow call removing extents
once we dropped the ilock either.
This patch duplicates the inner loop of xfs_bmapi_allocate into a
helper for xfs_reflink_allocate_cow_range so that it can be done under
the same ilock critical section as our CoW fork delayed allocation.
The directio CoW warts will be revisited in a later patch.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Report shared extents through the iomap interface so that FIEMAP flags
shared blocks accurately. Have xfs_vm_bmap return zero for reflinked
files because the bmap-based swap code requires static block mappings,
which is incompatible with copy on write.
NOTE: Existing userspace bmap users such as lilo will have the same
problem with reflink files.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
After the write component of a copy-write operation finishes, clean up
the bookkeeping left behind. On error, we simply free the new blocks
and pass the error up. If we succeed, however, then we must remove
the old data fork mapping and move the cow fork mapping to the data
fork.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
[hch: Call the CoW failure function during xfs_cancel_ioend]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Create a helper method to remove extents from the CoW fork without
any of the side effects (rmapbt/bmbt updates) of the regular extent
deletion routine. We'll eventually use this to clear out the CoW fork
during ioend processing.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Modify the writepage handler to find and convert pending delalloc
extents to real allocations. Furthermore, when we're doing non-cow
writes to a part of a file that already has a CoW reservation (the
cowextsz hint that we set up in a subsequent patch facilitates this),
promote the write to copy-on-write so that the entire extent can get
written out as a single extent on disk, thereby reducing post-CoW
fragmentation.
Christoph moved the CoW support code in _map_blocks to a separate helper
function, refactored other functions, and reduced the number of CoW fork
lookups, so I merged those changes here to reduce churn.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Modify xfs_bmap_add_extent_delay_real() so that we can convert delayed
allocation extents in the CoW fork to real allocations, and wire this
up all the way back to xfs_iomap_write_allocate(). In a subsequent
patch, we'll modify the writepage handler to call this.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Wire up iomap_begin to detect shared extents and create delayed allocation
extents in the CoW fork:
1) Check if we already have an extent in the COW fork for the area.
If so nothing to do, we can move along.
2) Look up block number for the current extent, and if there is none
it's not shared move along.
3) Unshare the current extent as far as we are going to write into it.
For this we avoid an additional COW fork lookup and use the
information we set aside in step 1) above.
4) Goto 1) unless we've covered the whole range.
Last but not least, this updates the xfs_reflink_reserve_cow_range calling
convention to pass a byte offset and length, as that is what both callers
expect anyway. This patch has been refactored considerably as part of the
iomap transition.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Allow the creation of delayed allocation extents in the CoW fork. In
a subsequent patch we'll wire up iomap_begin to actually do this via
reflink helper functions.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Introduce a new in-core fork for storing copy-on-write delalloc
reservations and allocated extents that are in the process of being
written out.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Only non-rt files can be reflinked, so check that when we load an
inode. Also, don't leak the attr fork if there's a failure.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Report the reflink feature in the XFS geometry so that xfs_info and
friends know the filesystem has this feature.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Define all the tracepoints we need to inspect the runtime operation
of reflink/dedupe/copy-on-write.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Return the range of file blocks that bunmapi didn't free. This hint
is used by CoW and reflink to figure out what part of an extent
actually got freed so that it can set up the appropriate atomic
remapping of just the freed range.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Log recovery will iget an inode to replay BUI items and iput the inode
when it's done. Unfortunately, if the inode was unlinked, the iput
will see that i_nlink == 0 and decide to truncate & free the inode,
which prevents us from replaying subsequent BUIs. We can't skip the
BUIs because we have to replay all the redo items to ensure that
atomic operations complete.
Since unlinked inode recovery will reap the inode anyway, we can
safely introduce a new inode flag to indicate that an inode is in this
'unlinked recovery' state and should not be auto-reaped in the
drop_inode path.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Implement deferred versions of the inode block map/unmap functions.
These will be used in subsequent patches to make reflink operations
atomic.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Pass BMAPI_ flags from bunmapi into bmap_del_extent and extend
BMAPI_REMAP (which means "don't touch the allocator or the quota
accounting") to apply to bunmapi as well. This will be used to
implement the unmap operation, which will be used by swapext.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Teach the bmap routine to know how to map a range of file blocks to a
specific range of physical blocks, instead of simply allocating fresh
blocks. This enables reflink to map a file to blocks that are already
in use.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Provide a mechanism for higher levels to create BUI/BUD items, submit
them to the log, and a stub function to deal with recovered BUI items.
These parts will be connected to the rmapbt in a later patch.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create bmbt update intent/done log items to record redo information in
the log. Because we roll transactions multiple times for reflink
operations, we also have to track the status of the metadata updates
that will be recorded in the post-roll transactions in case we crash
before committing the final transaction. This mechanism enables log
recovery to finish what was already started.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
These functions will be used by the other reflink functions to find
the maximum length of a range of shared blocks.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.coM>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reduce the max AG usable space size so that we always have space for
the refcount btree root.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Identify refcountbt blocks in the log correctly so that we can
validate them during log recovery.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
When we're unmapping blocks from a reflinked file, decrease the
refcount of the affected blocks and free the extents that are no
longer in use.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Plumb in the upper level interface to schedule and finish deferred
refcount operations via the deferred ops mechanism.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Provide functions to adjust the reference counts for an extent of
physical blocks stored in the refcount btree.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Provide a mechanism for higher levels to create CUI/CUD items, submit
them to the log, and a stub function to deal with recovered CUI items.
These parts will be connected to the refcountbt in a later patch.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create refcount update intent/done log items to record redo
information in the log. Because we need to roll transactions between
updating the bmbt mapping and updating the reverse mapping, we also
have to track the status of the metadata updates that will be recorded
in the post-roll transactions, just in case we crash before committing
the final transaction. This mechanism enables log recovery to finish
what was already started.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Implement the generic btree operations required to manipulate refcount
btree blocks. The implementation is similar to the bmapbt, though it
will only allocate and free blocks from the AG.
Since the refcount root and level fields are separate from the
existing roots and levels array, they need a separate logging flag.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
[hch: fix logging of AGF refcount btree fields]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Every time we allocate or free a data extent, we might need to split
the refcount btree. Reserve some blocks in the transaction to handle
this possibility. Even though the deferred refcount code can roll a
transaction to avoid overloading the transaction, we can still exceed
the reservation.
Certain pathological workloads (1k blocks, no cowextsize hint, random
directio writes), cause a perfect storm wherein a refcount adjustment
of a large range of blocks causes full tree splits in two separate
extents in two separate refcount tree blocks; allocating new refcount
tree blocks causes rmap btree splits; and all the allocation activity
causes the freespace btrees to split, blowing the reservation.
(Reproduced by generic/167 over NFS atop XFS)
Signed-off-by: Christoph Hellwig <hch@lst.de>
[darrick.wong@oracle.com: add commit message]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Modify the growfs code to initialize new refcount btree blocks.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Start constructing the refcount btree implementation by establishing
the on-disk format and everything needed to read, write, and
manipulate the refcount btree blocks.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Since XFS reserves a small amount of space in each AG as the minimum
free space needed for an operation, save some more space in case we
touch the refcount btree.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Add new per-AG refcount btree definitions to the per-AG structures.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Define all the tracepoints we need to inspect the refcount btree
runtime operation.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
If the size of an inline directory is so small that it doesn't
even cover the required header size, return an error to userspace
instead of ASSERTing and returning 0 like everything's ok.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reported-by: Jan Kara <jack@suse.cz>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
