... and __initconst if applicable.
Based on similar work for an older kernel in the Grsecurity patch.
[JD: fix toshiba-wmi build]
[JD: add htcpen]
[JD: move __initconst where checkscript wants it]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
The null check on the array msto is incorrect since msto is never
null. The null check should be instead on msto[i] since this is
being dereferenced in the call to drm_mode_connector_attach_encoder.
Thanks to Emil Velikov for pointing out the mistake in my original
fix and for suggesting the correct fix.
Detected by CoverityScan, CID#1375915 ("Array compared against 0")
Fixes: f479c0ba4a ("drm/nouveau/kms/nv50: initial support for DP 1.2 multi-stream")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
It appears that MSI does not work on either G5 PPC nor on a E5500-based
platform, where other hardware is reported to work fine with MSI.
Both tests were conducted with NV4x hardware, so perhaps other (or even
this) hardware can be made to work. It's still possible to force-enable
with config=NvMSI=1 on load.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
drm_crtc_init exposes the XRGB8888 and ARGB8888 formats. In actuality,
ARGB8888's 32-bit depth messes up some formulas that weren't meant for
it, and the alpha is fairly meaningless for the primary plane.
The modesetting logic appears to be fully prepared for RGB565 as well as
XRGB1555 however, as tested with modetest.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We were previously setting the pitch based on a perfectly packed buffer.
This does not necessarily happen. Either modetest started generating
such buffers recently, or earlier testing only happened with well-picked
overlay sizes.
While we're at it, beef up and refactor the error state detection.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Pre-nv50 YUV overlays have stringent requirements for working with the
internal machinery. Instead of rejecting these at update_plane time, we
should instead prevent the framebuffers from being created in the first
place.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Useful for testing, and for the userspace build where we can't kick
a framebuffer driver off the device.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Forked from GP107 implementation. Secboot/gr left out as we don't have
signed blobs from NVIDIA in linux-firmware.
(Ben): Was unable to mmiotrace the binary driver for unknown reasons,
so not able to 100% confirm that no other changes from GP107
are needed. Quick testing shows it seems to work well enough
for display. Due to NVIDIA dragging their heels on getting
signed firmware to us, this is the best we can do for now.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101601
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Most of these errors seem to be WFD related. Official documentation
says dcb type 8 is reserved. It's probably used for WFD. Silence
the warning in either case.
Connector type 70 is stated to be a virtual connector for WiFi
display. Since we know this, don't warn that we don't.
Signed-off by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This warning seems to pop up mainly in laptop cards. Silence it as
it is expected behavior.
Signed-off by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The NV_PMC_ENABLE bit for PMU did not appear until GF100, and some other
unknown register needs to be poked instead.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
An upcoming commit will replace direct NV_PMC register bashing from PMU
with a call to the proper function.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We assume that each board has 4 heads for GF119+. However this is not
necessarily true - in the case of a GP108 board, the register indicated
that there were only 2.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101601
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Array thresolds should be named thresholds, rename it. Also make it static
static const char * const
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Provide the drm printer directly instead of just the callback.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The most recent merge commit in airlied/drm-next has problems with
confusing old_crtc_state and new_crtc_state. Use the
for_each_oldnew_crtc_in_state macros to clean up the confusion,
and explicitly look at the correct state instead of looking at
asyh->state.
With these fixes it becomes more obvious what the code is trying to do,
which will hopefully prevent future confusion.
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZkNpUAAoJEHm+PkMAQRiGr68H/2nr8kxpoUhZ7eA5C71waCjh
gnJSevkzJAp+fCb0KfQFAp1qvpmLLle4e6tAxYgTQZg4Z3W5cJJNfxu9TzY5sGuL
o9QUr43XzABepW4e4jhRtZv6dj3K6XruNeDQKXDZTDcc/S8zoiS/Pltq7VgPcAuM
kX+3qsNdUyknngD6b0z9NtJkb0mHKY6J8MpraWRO34egDwsaN/tuhRj0DRQpCoyQ
x/k+hMbc9MB9Dn8cfACo6Omb+r5Rfd7dTBUAju/TnIIgs//9voHba307N7XvLJZg
kWc8MqMQQZXfRZHB0atpDMHyZS/XQRlNPXj76j0+Ud/byODKTFkkazmgTpALvj8=
=CxeU
-----END PGP SIGNATURE-----
Backmerge tag 'v4.13-rc5' into drm-next
Linux 4.13-rc5
There's a really nasty nouveau collision, hopefully someone can take a look
once I pushed this out.
Fixes hitting WARN_ON() during initialisation of pre-NV50 GPUs, caused
by the recent changes to support pad macro routing on GM20x.
We currently don't use them here for older GPUs anyway.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
It's dead code, the core handles all this directly now.
The only special case is nouveau and tda988x which used one function
for both legacy modeset code and -nv50 atomic world instead of 2
vtables. But amounts to exactly the same.
v2: Rebase over the panel/brideg refactorings in stm/ltdc.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Peter Senna Tschudin <peter.senna@collabora.com>
Cc: Martin Donnelly <martin.donnelly@ge.com>
Cc: Martyn Welch <martyn.welch@collabora.co.uk>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Alison Wang <alison.wang@freescale.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Carlo Caione <carlo@caione.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Yannick Fertre <yannick.fertre@st.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: Jeffy Chen <jeffy.chen@rock-chips.com>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Yakir Yang <kuankuan.y@gmail.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Romain Perier <romain.perier@collabora.com>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Hai Li <hali@codeaurora.org>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-tegra@vger.kernel.org
Cc: virtualization@lists.linux-foundation.org
Cc: zain wang <wzz@rock-chips.com>
Cc: Baoyou Xie <baoyou.xie@linaro.org>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-8-daniel.vetter@ffwll.ch
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Archit Taneja <architt@codeaurora.org>
Tested-by: Philippe Cornu <philippe.cornu@st.com> (on stm)
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Vincent Abriou <vincent.abriou@st.com>
It's dead code, the core handles all this directly now. This also
allows us to unexport drm_atomic_helper_connector_set_property.
The only special case is nouveau which used one function for both
pre-nv50 legacy modeset code and post-nv50 atomic world instead of 2
vtables. But amounts to exactly the same.
What is rather strange here is how few drivers set this up, I suspect
the earlier patch to handle properties in the core did end up fixing a
pile of possible issues.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: intel-gfx@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-7-daniel.vetter@ffwll.ch
Acked-by: Vincent Abriou <vincent.abriou@st.com>
It's dead code because this is now handled in the core.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Eric Engestrom <eric@engestrom.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Sushmita Susheelendra <ssusheel@codeaurora.org>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: intel-gfx@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-5-daniel.vetter@ffwll.ch
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
The redundant fb helpers .load_lut, .gamma_set and .gamma_get are
no longer used. Remove the dead code and hook up the crtc .gamma_set
to use the crtc gamma_store directly instead of duplicating that
info locally.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-12-peda@axentia.se
This is the plumbing for supporting fb modifiers on planes. Modifiers
have already been introduced to some extent, but this series will extend
this to allow querying modifiers per plane. Based on this, the client to
enable optimal modifications for framebuffers.
This patch simply allows the DRM drivers to initialize their list of
supported modifiers upon initializing the plane.
v2: A minor addition from Daniel
v3:
* Updated commit message
* s/INVALID/DRM_FORMAT_MOD_INVALID (Liviu)
* Remove some excess newlines (Liviu)
* Update comment for > 64 modifiers (Liviu)
v4: Minor comment adjustments (Liviu)
v5: Some new platforms added due to rebase
v6: Add some missed plane inits (or maybe they're new - who knows at
this point) (Daniel)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Daniel Stone <daniels@collabora.com> (v2)
Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Stone <daniels@collabora.com>
Use the new atomic iterator macros, the old ones are about to be
removed. With the new macros, it's more easy to get old and new state so
get them from the macros instead of from obj->state.
Changes since v1:
- Don't mix up old and new state. (danvet)
- Rebase on top of interruptible swap_state changes.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20170719143920.25685-7-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
I need this to be able to apply the deferred fbdev setup patches, I
need the relevant prep work that landed through the drm-intel tree.
Also squash in conflict fixup from Laurent Pinchart.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Make it more clear that post commit return ret is really return 0,
and add a missing drm_atomic_helper_cleanup_planes when
drm_atomic_helper_wait_for_fences fails.
Fixes: 839ca903f1 ("drm/nouveau/kms/nv50: transition to atomic interfaces internally")
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.10+
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170711143314.2148-2-maarten.lankhorst@linux.intel.com
Reviewed-by: Sean Paul <seanpaul@chromium.org>
[mlankhorst: Use if (ret) to remove the goto in success case.]
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Bit 30 being set causes the upper half of BAR2 to stay in physical mode,
mapped over the end of VRAM, even when the rest of the BAR has been set
to virtual mode.
We inherited our initial value from RM, but I'm not aware of any reason
we need to keep it that way.
This fixes severe GPU hang/lockup issues revealed by Wayland on F26.
Shout-out to NVIDIA for the quick response with the potential cause!
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org # 4.3+
GP102's cursors go from chan 17..20. Increase the array size to hold
their data properly.
Fixes: e50fcff15f ("drm/nouveau/disp/gp102: fix cursor/overlay immediate channel indices")
Cc: stable@vger.kernel.org # v4.10+
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
These on()/off() calls should be done as a result of modesetting actions,
and as we shut down all heads already on unload/suspend, it's pointless
to call off() again.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We don't support them on G80, but we need to add them to the mapping to
avoid triggering a WARN_ON() on GPUs where the ports are present.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Since switching the I2C-over-AUX helpers, there have been regressions on
some display combinations due to us not having support for "address only"
transactions.
This commits enables support for them for GF119 and newer.
Earlier GPUs have been reverted to a custom I2C-over-AUX algorithm.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
HDMI 1.4b support the CEA video modes as per range of CEA-861-D (VIC 1-64).
For any other mode, the VIC filed in AVI infoframes should be 0.
HDMI 2.0 sinks, support video modes range as per CEA-861-F spec, which is
extended to (VIC 1-107).
This patch adds a bool input variable, which indicates if the connected
sink is a HDMI 2.0 sink or not. This will make sure that we don't pass a
HDMI 2.0 VIC to a HDMI 1.4 sink.
This patch touches all drm drivers, who are callers of this function
drm_hdmi_avi_infoframe_from_display_mode but to make sure there is
no change in current behavior, is_hdmi2 is kept as false.
In case of I915 driver, this patch:
- checks if the connected display is HDMI 2.0.
- HDMI infoframes carry one of this two type of information:
- VIC for 4K modes for HDMI 1.4 sinks
- S3D information for S3D modes
As CEA-861-F has already defined VICs for 4K videomodes, this
patch doesn't allow sending HDMI infoframes for HDMI 2.0 sinks,
until the mode is 3D.
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jose Abreu <jose.abreu@synopsys.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
PS: This patch touches a few lines in few files, which were
already above 80 char, so checkpatch gives 80 char warning again.
- gpu/drm/omapdrm/omap_encoder.c
- gpu/drm/i915/intel_sdvo.c
V2: Rebase, Added r-b from Andrzej
V3: Addressed review comment from Ville:
- Do not send VICs in both AVI-IF and HDMI-IF
send only one of it.
V4: Rebase
V5: Added r-b from Neil.
Addressed review comments from Ville
- Do not block HDMI vendor IF, instead check for VIC while
handling AVI infoframes
V6: Rebase
V7: Rebase
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-2-git-send-email-shashank.sharma@intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
-----BEGIN PGP SIGNATURE-----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=2S5N
-----END PGP SIGNATURE-----
Merge tag 'drm-for-v4.13' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
"This is the main pull request for the drm, I think I've got one later
driver pull for mediatek SoC driver, I'm undecided on if it needs to
go to you yet.
Otherwise summary below:
Core drm:
- Atomic add driver private objects
- Deprecate preclose hook in modern drivers
- MST bandwidth tracking
- Use kvmalloc in more places
- Add mode_valid hook for crtc/encoder/bridge
- Reduce sync_file construction time
- Documentation updates
- New DRM synchronisation object support
New drivers:
- pl111 - pl111 CLCD display controller
Panel:
- Innolux P079ZCA panel driver
- Add NL12880B20-05, NL192108AC18-02D, P320HVN03 panels
- panel-samsung-s6e3ha2: Add s6e3hf2 panel support
i915:
- SKL+ watermark fixes
- G4x/G33 reset improvements
- DP AUX backlight improvements
- Buffer based GuC/host communication
- New getparam for (sub)slice infomation
- Cannonlake and Coffeelake initial patches
- Execbuf optimisations
radeon/amdgpu:
- Lots of Vega10 bug fixes
- Preliminary raven support
- KIQ support for compute rings
- MEC queue management rework
- DCE6 Audio support
- SR-IOV improvements
- Better radeon/amdgpu selection support
nouveau:
- HDMI stereoscopic support
- Display code rework for >= GM20x GPUs
msm:
- GEM rework for fine-grained locking
- Per-process pagetable work
- HDMI fixes for Snapdragon 820.
vc4:
- Remove 256MB CMA limit from vc4
- Add out-fence support
- Add support for cygnus
- Get/set tiling ioctls support
- Add T-format tiling support for scanout
zte:
- add VGA support.
etnaviv:
- Thermal throttle support for newer GPUs
- Restore userspace buffer cache performance
- dma-buf sync fix
stm:
- add stm32f429 display support
exynos:
- Rework vblank handling
- Fixup sw-trigger code
sun4i:
- V3s display engine support
- HDMI support for older SoCs
- Preliminary work on dual-pipeline SoCs.
rcar-du:
- VSP work
imx-drm:
- Remove counter load enable from PRE
- Double read/write reduction flag support
tegra:
- Documentation for the host1x and drm driver.
- Lots of staging ioctl fixes due to grate project work.
omapdrm:
- dma-buf fence support
- TILER rotation fixes"
* tag 'drm-for-v4.13' of git://people.freedesktop.org/~airlied/linux: (1270 commits)
drm: Remove unused drm_file parameter to drm_syncobj_replace_fence()
drm/amd/powerplay: fix bug fail to remove sysfs when rmmod amdgpu.
amdgpu: Set cik/si_support to 1 by default if radeon isn't built
drm/amdgpu/gfx9: fix driver reload with KIQ
drm/amdgpu/gfx8: fix driver reload with KIQ
drm/amdgpu: Don't call amd_powerplay_destroy() if we don't have powerplay
drm/ttm: Fix use-after-free in ttm_bo_clean_mm
drm/amd/amdgpu: move get memory type function from early init to sw init
drm/amdgpu/cgs: always set reference clock in mode_info
drm/amdgpu: fix vblank_time when displays are off
drm/amd/powerplay: power value format change for Vega10
drm/amdgpu/gfx9: support the amdgpu.disable_cu option
drm/amd/powerplay: change PPSMC_MSG_GetCurrPkgPwr for Vega10
drm/amdgpu: Make amdgpu_cs_parser_init static (v2)
drm/amdgpu/cs: fix a typo in a comment
drm/amdgpu: Fix the exported always on CU bitmap
drm/amdgpu/gfx9: gfx_v9_0_enable_gfx_static_mg_power_gating() can be static
drm/amdgpu/psp: upper_32_bits/lower_32_bits for address setup
drm/amd/powerplay/cz: print message if smc message fails
drm/amdgpu: fix typo in amdgpu_debugfs_test_ib_init
...
- introduce the new uuid_t/guid_t types that are going to replace
the somewhat confusing uuid_be/uuid_le types and make the terminology
fit the various specs, as well as the userspace libuuid library.
(me, based on a previous version from Amir)
- consolidated generic uuid/guid helper functions lifted from XFS
and libnvdimm (Amir and me)
- conversions to the new types and helpers (Amir, Andy and me)
-----BEGIN PGP SIGNATURE-----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=J/4P
-----END PGP SIGNATURE-----
Merge tag 'uuid-for-4.13' of git://git.infradead.org/users/hch/uuid
Pull uuid subsystem from Christoph Hellwig:
"This is the new uuid subsystem, in which Amir, Andy and I have started
consolidating our uuid/guid helpers and improving the types used for
them. Note that various other subsystems have pulled in this tree, so
I'd like it to go in early.
UUID/GUID summary:
- introduce the new uuid_t/guid_t types that are going to replace the
somewhat confusing uuid_be/uuid_le types and make the terminology
fit the various specs, as well as the userspace libuuid library.
(me, based on a previous version from Amir)
- consolidated generic uuid/guid helper functions lifted from XFS and
libnvdimm (Amir and me)
- conversions to the new types and helpers (Amir, Andy and me)"
* tag 'uuid-for-4.13' of git://git.infradead.org/users/hch/uuid: (34 commits)
ACPI: hns_dsaf_acpi_dsm_guid can be static
mmc: sdhci-pci: make guid intel_dsm_guid static
uuid: Take const on input of uuid_is_null() and guid_is_null()
thermal: int340x_thermal: fix compile after the UUID API switch
thermal: int340x_thermal: Switch to use new generic UUID API
acpi: always include uuid.h
ACPI: Switch to use generic guid_t in acpi_evaluate_dsm()
ACPI / extlog: Switch to use new generic UUID API
ACPI / bus: Switch to use new generic UUID API
ACPI / APEI: Switch to use new generic UUID API
acpi, nfit: Switch to use new generic UUID API
MAINTAINERS: add uuid entry
tmpfs: generate random sb->s_uuid
scsi_debug: switch to uuid_t
nvme: switch to uuid_t
sysctl: switch to use uuid_t
partitions/ldm: switch to use uuid_t
overlayfs: use uuid_t instead of uuid_be
fs: switch ->s_uuid to uuid_t
ima/policy: switch to use uuid_t
...
The magic switching between proper pci driver and shadow-attach isn't
useful anymore since there's no ums+kms drivers left. Let's split this
up properly, calling pci_register_driver for kms drivers and renaming
the shadow-attach init to drm_legacy_pci_init/exit.
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-6-daniel.vetter@ffwll.ch
We use drm_crtc_ for all the new-style vblank functions which directly
take a struct drm_crtc *. drm_accurate_vblank_count was the odd one
out, correct this to appease my OCD.
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-13-daniel.vetter@ffwll.ch
There is a prototype for this function in the header, but the function
itself lacks a 'void' in the argument list, causing a harmless warning
when building with 'make W=1':
drivers/gpu/drm/nouveau/nouveau_drm.c: In function 'nouveau_pmops_runtime':
drivers/gpu/drm/nouveau/nouveau_drm.c:730:1: error: old-style function definition [-Werror=old-style-definition]
Fixes: 321f5c5f2c ("drm/nouveau: replace multiple open-coded runpm support checks with function")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
As with vga_init, this function doesn't make sense on non-PCI devices,
and the Thunderbolt check in it dereferences a NULL pointer in that
case. Add some code to skip this function when the device is not a PCI
device.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
On Tegra186 systems with certain firmware revisions, leaving the GPU in
reset can cause a hang. To prevent this, don't leave the GPU in reset.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
On Tegra186, powergating is handled by the BPMP power domain provider
and the "legacy" powergating API is not available. Therefore skip
these calls if we are attached to a power domain.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This patch replaces the symbolic permissions with the numeric ones.
Signed-off-by: Oscar Salvador <osalvador.vilardaga@gmail.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This patch creates a special group attributes for attrs like "*auto_point*".
We check if we have support for them, and if we do, we gather them all in
an attribute_group's structure which is the parameter regarding special groups
of hwmon_device_register_with_info
We also do the same for pwm_min/max attrs.
Signed-off-by: Oscar Salvador <osalvador.vilardaga@gmail.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This patch removes old code related to the old api and transforms the
functions for the new api. It also adds the .write and .read operations.
Signed-off-by: Oscar Salvador <osalvador.vilardaga@gmail.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This patch introduces the nouveau_hwmon_ops structure, sets up
.is_visible and .read_string operations and adds all the functions
for these operations.
This is also a preparation for the next patches, where most of the
work is being done.
This code doesn't interacture with the old one.
It's just to make easier the review of all patches.
Signed-off-by: Oscar Salvador <osalvador.vilardaga@gmail.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This is a preparation for the next patches. It just adds the sensors with
their possible configurable settings and then fills the struct hwmon_channel_info
with all this information.
Signed-off-by: Oscar Salvador <osalvador.vilardaga@gmail.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This makes use of all the additional routing and state added in previous
commits, making it possible to deal with GM20x macro link routing, while
also sharing code between the NV50 and GF119 implementations.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This makes use of all the additional routing and state added in previous
commits, making it possible to deal with GM20x macro link routing, while
also sharing code between the NV50 and GF119 implementations.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This makes use of all the additional routing and state added in previous
commits, making it possible to deal with GM20x macro link routing, while
also sharing code between the NV50 and GF119 implementations.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This makes use of all the additional routing and state added in previous
commits, making it possible to deal with GM20x macro link routing, while
also sharing code between the NV50 and GF119 implementations.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This makes use of all the additional routing and state added in previous
commits, making it possible to deal with GM20x macro link routing, while
also sharing code between the NV50 and GF119 implementations.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This shouldn't have been needed ever since we started executing the
DisableLT script when shutting down heads.
Testing of the board this was originally written for seems to agree.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Training/Untraining will be hooked up to the routing logic, which
doesn't allow us to pass in a data rate.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
These exist to give NVKM information on the set of display paths that
the DD needs to be active at any given time.
Previously, the supervisor attempted to determine this solely from OR
state, but there's a few configurations where this information on its
own isn't enough to determine the specific display paths in question:
- ANX9805, where the PIOR protocol for both DP and TMDS is TMDS.
- On a device using DCB Switched Outputs.
- On GM20x and newer, with a crossbar between the SOR and macro links.
After this commit, the DD tells NVKM *exactly* which display path it's
attempting a modeset on.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
All of the necessary hw-specific logic is now handled at the output
resource level, so all of this can go away.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Also removes the user-facing methods to these controls, as they're not
currently utilised by the DD anyway.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This essentially (unless the link becomes unstable and needs to be
re-trained) gives us a single entry-point to link training, during
supervisor handling, where we can ensure all routing is up to date.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
An upcoming commit will limit link training to only when the sink is
meant to be displaying an image.
We still need IRQs enabled even when the link isn't trained (for MST
messages), but don't want to train the link unnecessarily.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The aim here is to protect the OR against locking up when something
unexpected happens (such as the display disappearing during modeset,
or the DD misbehaving).
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This struct doesn't hold link configuration data anymore, so we can
limit its use to internal DP training (anx9805 handles training for
external DP).
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This hasn't been used since atomic.
We may want to re-implement "fast" DPMS at some point, but for now,
this just gets in the way.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This essentially replicates our current behaviour in a way that's
compatible with the new model that's emerging, so that we're able
to start porting the hw-specific functions to it.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Upcoming commits make supervisor handling share code between the NV50
and GF119 implementations. Because of this, and a few other cleanups,
we need to allow some additional customisation.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
In order to properly support the SOR -> SOR + pad macro separation
that occurred with GM20x GPUs, we need to separate OR handling out
of the output path code.
This will be used as the base to support ORs (DAC, SOR, PIOR).
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Primarily intended as a way to pass per-head state around during
supervisor handling, and share logic between NV50/GF119.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This is to allow hw-specific code to instantiate output resources first,
so we can cull unsupported output paths based on them.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Not all users of nvkm_output_dp have been changed here. The remaining
ones belong to code that's disappearing in upcoming commits.
This also modifies the debug level of some messages.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This isn't technically "output", but, "display/output path".
Not all users of nvkm_output have been changed here. The remaining
ones belong to code that's disappearing in upcoming commits.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Upcoming changes to split OR from output path drastically change the
placement of various operations.
In order to make the real changes clearer, do the moving around part
ahead of time.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
As of DCB 4.1, these are not the same thing.
Compatibility temporarily in place until callers have been updated.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We already have a subdev pointer, from which we can locate the device's
BIOS subdev. No need for a separate pointer.
Structure/callers not updated yet, as I want to batch more changes and
only touch the callers once.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
nvkm_timer_alarm() already handles this as part of protecting against
callers passing in no timeout value.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
I only saw those values inside the vbios: 0xff, 0xfd, 0xfc, 0xfa for valid
rails.
No idea what the lower value does, but at least we get power readings on
a lot of Fermi GPUs with that.
v2: add missing parentheses
Signed-off-by: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This is according to what we have in nvbios.
Fixes "ERROR: Can't get value of subfeature in0_min: Can't read" errors
in sensors for some GPUs.
Signed-off-by: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Enable stereoscopic output for HDMI and DisplayPort connectors on
NV50+ (G80+) hardware. We do not enable stereoscopy on older
hardware in case there is some older board that still has HDMI
output but for which we have no logic for setting the Vendor
InfoFrame.
With this, I get an obvious 3D output when using the "testdisplay"
program from intel-gpu-tools with the "-3" parameter and outputting
to a 3D-capable HDMI display, for all available 3D modes (be they
TB, SBSH, or FP) on all four G80+ DISPs.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Frame-packing modes add an extra vtotal raster lines to each frame
above and beyond what the basic mode description calls for.
Account for this during scaler configuration (possibly a bit of a
hack), during CRTC configuration (clearly not a hack), and when
checking that a mode is valid for a given connector (cribbed from
the i915 driver).
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Now that we have the InfoFrame data being provided, for the most
part, program the hardware to use it.
While we're here, and since the functionality will come in handy
for supporting 3D stereoscopy, implement setting the Vendor
("generic"?) InfoFrame.
Also don't enable any InfoFrame that is not provided, and disable
the Vendor InfoFrame when disabling the output.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Now that we have the InfoFrame data being provided, for the most
part, program the hardware to use it.
While we're here, and since the functionality will come in handy
for supporting 3D stereoscopy, implement setting the Vendor
("generic"?) InfoFrame.
Also don't enable any InfoFrame that is not provided, and disable
the Vendor InfoFrame when disabling the output.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Now that we have the InfoFrame data being provided, for the most
part, program the hardware to use it.
While we're here, and since the functionality will come in handy
for supporting 3D stereoscopy, implement setting the Vendor
("generic") InfoFrame.
Also don't enable any AVI or Vendor InfoFrame that is not provided,
and disable the Vendor InfoFrame when disabling the output.
Ignore the Audio InfoFrame: We don't supply it, and altering HDMI
audio semantics (for better or worse) on this hardware is out of
scope for me at this time.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Now that we have the InfoFrame data being provided, for the most
part, program the hardware to use it.
While we're here, and since the functionality will come in handy
for supporting 3D stereoscopy, implement setting the Vendor
("generic"?) InfoFrame.
Also don't enable any AVI or Vendor InfoFrame that is not provided,
and disable the Vendor InfoFrame when disabling the output.
Ignore the Audio InfoFrame: We don't supply it, and altering HDMI
audio semantics (for better or worse) on this hardware is out of
scope for me at this time.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
HDMI InfoFrames are passed to NVKM as bags of bytes, but the
hardware needs them to be packed into words. Rather than having
four (or more) copies of the packing logic introduce a single copy
now, in a central place.
We currently need these for AVI and Vendor InfoFrames, but we may
also expect to need them for Audio InfoFrames at some point.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Now that we have mechanism by which to pass mode-dependent HDMI
InfoFrames to the low-level hardware driver, it is incumbent upon
us to do so.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The nouveau driver, in the Linux 3.7 days, used to try and set the
AVI InfoFrame based on the selected display mode. These days, it
uses a fixed set of InfoFrames. Start to correct that, by
providing a mechanism whereby InfoFrame data may be passed to the
NVKM functions that do the actual configuration.
At this point, only establish the new parameters and their parsing,
don't actually use the data anywhere yet (since it's not supplied
anywhere).
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
drm_mode_set_crtcinfo() does compensation for interlace and
doublescan timing effects already, so do it first and use the
compensated figures instead of the constant "vscan / ilace" terms
that we had before.
And then it turns out that the hardware model for how the timing
parameters are configured is basically the standard model, but
starting one clock before the sync pulse rather than at the start
of the display area, which lets us drastically simplify the
overall timing calculations (verifying the changes by algebraic
operations is left as an exercise for the reader).
Finally, there were a couple of issues with the computation of
m->v.blankus that are addressed here. Interlaced modes would
generate a negative intermediate result. Double scan modes would
generate an overestimate rather than an underestimate. And when
enabling frame-packing modes, a rather extreme overestimate would
be generated. Fixed, by using the timings as adjusted for the
CRTC to find the length of the vertical blanking period instead of
mixing adjusted and pre-adjustment timing parameters.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZPdbLAAoJEHm+PkMAQRiGx4wH/1nCjfnl6fE8oJ24/1gEAOUh
biFdqJkYZmlLYHVtYfLm4Ueg4adJdg0wx6qM/4RaAzmQVvLfDV34bc1qBf1+P95G
kVF+osWyXrZo5cTwkwapHW/KNu4VJwAx2D1wrlxKDVG5AOrULH1pYOYGOpApEkZU
4N+q5+M0ce0GJpqtUZX+UnI33ygjdDbBxXoFKsr24B7eA0ouGbAJ7dC88WcaETL+
2/7tT01SvDMo0jBSV0WIqlgXwZ5gp3yPGnklC3F4159Yze6VFrzHMKS/UpPF8o8E
W9EbuzwxsKyXUifX2GY348L1f+47glen/1sedbuKnFhP6E9aqUQQJXvEO7ueQl4=
=m2Gx
-----END PGP SIGNATURE-----
BackMerge tag 'v4.12-rc5' into drm-next
Linux 4.12-rc5 for nouveau fixes
acpi_evaluate_dsm() and friends take a pointer to a raw buffer of 16
bytes. Instead we convert them to use guid_t type. At the same time we
convert current users.
acpi_str_to_uuid() becomes useless after the conversion and it's safe to
get rid of it.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Yisen Zhuang <yisen.zhuang@huawei.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Core Changes:
- Stop proliferation of drm_vblank_cleanup by adding to the docs and deleting
boilerplate (Daniel)
- Roll out and use mode_valid hooks across crtc/encoder/bridge (Jose)
- Add drm_vblank.[hc] to isolate vblank code from optional irq helpers (Daniel)
Driver Changes:
- Replace drm_for_each_connector with drm_for_each_connector_iter (Gustavo)
- A couple misc driver fixes
Cc: Gustavo Padovan <gustavo.padovan@collabora.com>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
* tag 'drm-misc-next-2017-06-02' of git://anongit.freedesktop.org/git/drm-misc: (34 commits)
drm/vc4: Mark the device as active when enabling runtime PM.
drm: remove writeq/readq function definitions
drm/atmel-hlcdc: Use crtc->mode_valid() callback
drm/exynos: Drop drm_vblank_cleanup
drm/hdlcd|mali: Drop drm_vblank_cleanup
drm/doc: Polish irq helper documentation
drm: Extract drm_vblank.[hc]
drm/vc4: Fix comment in vc4_drv.h
drm/pl111: fix warnings without CONFIG_ARM_AMBA
drm/atomic: Consitfy mode parameter to drm_atomic_set_mode_for_crtc()
drm/arcgpu: Drop drm_vblank_cleanup
drm/atmel: Drop drm_vblank_cleanup
drm/imx: Drop drm_vblank_cleanup
drm/meson: Drop drm_vblank_cleanup
drm/stm: Drop drm_vblank_cleanup
drm/sun4i: Drop drm_vblank_cleanup
drm: better document how to send out the crtc disable event
drm: Use vsnprintf extension %ph
drm/doc: move printf helpers out of drmP.h
drm/pl111: select DRM_PANEL
...
Reusing the list_head for both is a bad idea. Callback execution is done
with the lock dropped so that alarms can be rescheduled from the callback,
which means that with some unfortunate timing, lists can get corrupted.
The execution list should not require its own locking, the single function
that uses it can only be called from a single context.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
Add null check before dereferencing pointer asyc
Addresses-Coverity-ID: 1397932
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZK2lrAAoJEHm+PkMAQRiGm3AH/13F1DlIk05aSXHoDr/idIpR
GMHmk3YF+EuFjsL463Sh6s/SSWmz0Lda8euaoB4wCWvQFX2ZjTE+aOd79XlRiZJQ
OTtLkV9I41eXIJUpEOHia7xZiCsbw+usqcHrm1aBoSh5KKV2iQmEOrnJdibqJVOF
eXUMphNK/zFtAd2bKtQSxkaBnOOqsQUgVQSkr2K9rSg25l0KokFC6c5K5IjLn4x9
QgDY4wmMvHrDz0CtpoqlNM4XqbsDJVrFeZGfg6hlMqSRDeXeg4h3Ol0VfIT496RP
QBdrDb6hWO+HKt9B0M+7Q+8a/Fsw+5dtpqv1W/Wlr0i4CS6euU8NChAmrpkrqGo=
=m5ba
-----END PGP SIGNATURE-----
Backmerge tag 'v4.12-rc3' into drm-next
Linux 4.12-rc3
Daniel has requested this for some drm-intel-next work.
Add DRM_MODE_ROTATE_ and DRM_MODE_REFLECT_ defines to the UAPI
as a convenience.
Ideally the DRM_ROTATE_ and DRM_REFLECT_ property ids are looked up
through the atomic API, but realizing that userspace is likely to take
shortcuts and assume that the enum values are what is sent over the
wire.
As a result these defines are provided purely as a convenience to
userspace applications.
Changes since v3:
- Switched away from past tense in comments
- Add define name change to previously mis-spelled DRM_REFLECT_X comment
- Improved the comment for the DRM_MODE_REFLECT_<axis> comment
Changes since v2:
- Changed define prefix from DRM_MODE_PROP_ to DRM_MODE_
- Fix compilation errors
- Changed comment formatting
- Deduplicated comment lines
- Clarified DRM_MODE_PROP_REFLECT_ comment
Changes since v1:
- Moved defines from drm.h to drm_mode.h
- Changed define prefix from DRM_ to DRM_MODE_PROP_
- Updated uses of the defines to the new prefix
- Removed include from drm_rect.c
- Stopped using the BIT() macro
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170519205017.23307-2-robert.foss@collabora.com
UAPI Changes:
- Return -ENODEV instead of -ENXIO when creating cma fb w/o valid gem (Daniel)
- Add aspect ratio and custom scaling propertis to connector state (Maarten)
Cross-subsystem Changes:
- None
Core Changes:
- Add Laurent as bridge reviewer and Andrzej as bridge maintainer (Archit)
- Maintain new STM driver through -misc (Yannick)
- Misc doc improvements (as is tradition) (Daniel)
- Add driver-private objects to atomic state (Dhinakaran)
- Deprecate preclose hook in modern drivers (use postclose) (Daniel)
- Add hwmode to vblank struct. This fixes mode access in irq context and reduced
a bunch of boilerplate (Daniel)
Driver Changes:
- vc4: Add out-fence support to vc4 V3D rendering (Eric)
- stm: Add stm32f429 display hw and am-480272h3tmqw-t01h panel support (Yannick)
- vc4: Remove 256MB cma limit from vc4 (Eric)
- dw-hdmi: Disable audio when inactive, instead of always enabled (Romain)
- zte: Add support for VGA to the ZTE driver (Shawn)
- i915: Track DP MST bandwidth and check it in atomic_check (Dhinakaran)
- vgem: Enable gem dmabuf import iface to facilitate ion testing (Laura)
- vc4: Add support for Cygnus (new dt compat string + couple bug fixes) (Eric)
- pl111: Add driver for pl111 CLCD display controller (Eric/Tom)
- vgem: Subclass drm_device instead of standalone platform device (Chris)
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Yannick Fertre <yannick.fertre@st.com>
Cc: Romain Perier <romain.perier@collabora.com>
Cc: Navare, Manasi D <manasi.d.navare@intel.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tom Cooksey <tom.cooksey@arm.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
* tag 'drm-misc-next-2017-05-16' of git://anongit.freedesktop.org/git/drm-misc: (72 commits)
drm: add missing declaration to drm_blend.h
drm/dp: Wait up all outstanding tx waiters
drm/dp: Read the tx msg state once after checking for an event
drm/prime: Forward declare struct device
drm/vblank: Lock down vblank->hwmode more
drm/vblank: drop the mode argument from drm_calc_vbltimestamp_from_scanoutpos
drm/vblank: Add FIXME comments about moving the vblank ts hooks
drm/vblank: Switch to bool in_vblank_irq in get_vblank_timestamp
drm/vblank: Switch drm_driver->get_vblank_timestamp to return a bool
drm/vgem: Convert to a struct drm_device subclass
gpu: drm: gma500: remove dead code
drm/sti: Adjust two checks for null pointers in sti_hqvdp_probe()
drm/sti: Fix typos in a comment line
drm/sti: Fix a typo in a comment line
drm/sti: Replace 17 seq_puts() calls by seq_putc()
drm/sti: Reduce function calls for sequence output at five places
drm/sti: use seq_puts to display a string
drm: Nerf the preclose callback for modern drivers
drm/exynos: Merge pre/postclose hooks
drm/tegra: switch to postclose
...
Presumably we can never actually hit this return, but static checkers
complain that we should unlock before we return.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The last goto looks spurious because it releases less resources than the
previous one.
Also free 'img->sig' if 'ls_ucode_img_build()' fails.
Fixes: 9d896f3e41 ("drm/nouveau/secboot: abstract LS firmware loading functions")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Commit cae9ff036e effectively disabled the drm poll_helper by checking
the wrong flag to see if the driver should enable the poll or not:
mode_config.poll_enabled is only set to true by poll_init and it is not
indicating if the poll is enabled or not.
nouveau_display_create() will initialize the poll and going to disable it
right away. After poll_init() the mode_config.poll_enabled will be true,
but the poll itself is disabled.
To avoid the race caused by calling the poll_enable() from different paths,
this patch will enable the poll from one place, in the
nouveau_display_hpd_work().
In case the pm_runtime is disabled we will enable the poll in
nouveau_drm_load() once.
Fixes: cae9ff036e ("drm/nouveau: Don't enabling polling twice on runtime resume")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Lyude <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Quite a few patches, but not much code changed:
- Fixes regression from atomic when only the source rect of a plane
changes (ie. xrandr --right-of)
- Fixes another issue where atomic changed behaviour underneath us,
potentially causing laggy cursor position updates
- Fixes for a bunch of races in thermal code, which lead to random
lockups for a lot of users
* 'linux-4.12' of git://github.com/skeggsb/linux:
drm/nouveau/therm: remove ineffective workarounds for alarm bugs
drm/nouveau/tmr: avoid processing completed alarms when adding a new one
drm/nouveau/tmr: fix corruption of the pending list when rescheduling an alarm
drm/nouveau/tmr: handle races with hw when updating the next alarm time
drm/nouveau/tmr: ack interrupt before processing alarms
drm/nouveau/core: fix static checker warning
drm/nouveau/fb/ram/gf100-: remove 0x10f200 read
drm/nouveau/kms/nv50: skip core channel cursor update on position-only changes
drm/nouveau/kms/nv50: fix source-rect-only plane updates
drm/nouveau/kms/nv50: remove pointless argument to window atomic_check_acquire()
These were ineffective due to touching the list without the alarm lock,
but should no longer be required.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
The idea here was to avoid having to "manually" program the HW if there's
a new earliest alarm. This was lazy and bad, as it leads to loads of fun
races between inter-related callers (ie. therm).
Turns out, it's not so difficult after all. Go figure ;)
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
At least therm/fantog "attempts" to work around this issue, which could
lead to corruption of the pending alarm list.
Fix it properly by not updating the timestamp without the lock held, or
trying to add an already pending alarm to the pending alarm list....
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
If the time to the next alarm is short enough, we could race with HW and
end up with an ~4 second delay until it triggers.
Fix this by checking again after we update HW.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
Fixes a race where we can miss an alarm that triggers while we're already
processing previous alarms.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
object->engine cannot be NULL, it's either valid, or an error pointer.
This particular condition shouldn't actually be possible, but just in
case, we'll keep it.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This reg has moved on Pascal, and causes a bus fault.
We never use the value anyway, so just remove the read.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The DRM core used to only call prepare_fb/cleanup_fb() when a plane's
framebuffer changed, which achieved the desired effect.
It's apparently now up to the driver to decide on its own.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org [4.11+]
This "optimisation" (which was originally meant to skip updating cursor
settings in the core channel on position-only updates) turned out to be
pointless in the final design of the code before it was merged.
Remove it completely, as it breaks other cases.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org [4.10+]
If we restrict this helper to only kms drivers (which is the case) we
can look up the correct mode easily ourselves. But it's a bit tricky:
- All legacy drivers look at crtc->hwmode. But that is updated already
at the beginning of the modeset helper, which means when we disable
a pipe. Hence the final timestamps might be a bit off. But since
this is an existing bug I'm not going to change it, but just try to
be bug-for-bug compatible with the current code. This only applies
to radeon&amdgpu.
- i915 tries to get it perfect by updating crtc->hwmode when the pipe
is off (i.e. vblank->enabled = false).
- All other atomic drivers look at crtc->state->adjusted_mode. Those
that look at state->requested_mode simply don't adjust their mode,
so it's the same. That has two problems: Accessing crtc->state from
interrupt handling code is unsafe, and it's updated before we shut
down the pipe. For nonblocking modesets it's even worse.
For atomic drivers try to implement what i915 does. To do that we add
a new hwmode field to the vblank structure, and update it from
drm_calc_timestamping_constants(). For atomic drivers that's called
from the right spot by the helper library already, so all fine. But
for safety let's enforce that.
For legacy driver this function is only called at the end (oh the
fun), which is broken, so again let's not bother and just stay
bug-for-bug compatible.
The benefit is that we can use drm_calc_vbltimestamp_from_scanoutpos
directly to implement ->get_vblank_timestamp in every driver, deleting
a lot of code.
v2: Completely new approach, trying to mimick the i915 solution.
v3: Fixup kerneldoc.
v4: Drop the WARN_ON to check that the vblank is off, atomic helpers
currently unconditionally call this. Recomputing the same stuff should
be harmless.
v5: Fix typos and move misplaced hunks to the right patches (Neil).
v6: Undo hunk movement (kbuild).
Cc: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Cc: Eric Anholt <eric@anholt.net>
Cc: Rob Clark <robdclark@gmail.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170509140329.24114-4-daniel.vetter@ffwll.ch
It's overkill to have a flag parameter which is essentially used just
as a boolean. This takes care of core + adjusting drivers.
Adjusting the scanout position callback is a bit harder, since radeon
also supplies it's own driver-private flags in there.
v2: Fixup misplaced hunks (Neil).
v3: kbuild says v1 was better ...
Cc: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Cc: Eric Anholt <eric@anholt.net>
Cc: Rob Clark <robdclark@gmail.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170509140329.24114-2-daniel.vetter@ffwll.ch
There's really no reason for anything more:
- Calling this while the crtc vblank stuff isn't set up is a driver
bug. Those places alrready DRM_ERROR.
- Calling this when the crtc is off is either a driver bug (calling
drm_crtc_handle_vblank at the wrong time) or a core bug (for
anything else). Again, we DRM_ERROR.
- EINVAL is checked at higher levels already, and if we'd use struct
drm_crtc * instead of (dev, pipe) it would be real obvious that
those are again core bugs.
The only valid failure mode is crap hardware that couldn't sample a
useful timestamp, to ask the core to just grab a not-so-accurate
timestamp. Bool is perfectly fine for that.
v2: Also fix up the one caller, I lost that in the shuffling (Jani).
v3: Fixup commit message (Neil).
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Cc: Eric Anholt <eric@anholt.net>
Cc: Rob Clark <robdclark@gmail.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170509140329.24114-1-daniel.vetter@ffwll.ch
Again no apparent explanation for the split except hysterical raisins.
Merging them also makes it a bit more obviuos what's going on wrt the
runtime pm refdancing.
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170508082633.4214-1-daniel.vetter@ffwll.ch
There are many code paths opencoding kvmalloc. Let's use the helper
instead. The main difference to kvmalloc is that those users are
usually not considering all the aspects of the memory allocator. E.g.
allocation requests <= 32kB (with 4kB pages) are basically never failing
and invoke OOM killer to satisfy the allocation. This sounds too
disruptive for something that has a reasonable fallback - the vmalloc.
On the other hand those requests might fallback to vmalloc even when the
memory allocator would succeed after several more reclaim/compaction
attempts previously. There is no guarantee something like that happens
though.
This patch converts many of those places to kv[mz]alloc* helpers because
they are more conservative.
Link: http://lkml.kernel.org/r/20170306103327.2766-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> # Xen bits
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Andreas Dilger <andreas.dilger@intel.com> # Lustre
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> # KVM/s390
Acked-by: Dan Williams <dan.j.williams@intel.com> # nvdim
Acked-by: David Sterba <dsterba@suse.com> # btrfs
Acked-by: Ilya Dryomov <idryomov@gmail.com> # Ceph
Acked-by: Tariq Toukan <tariqt@mellanox.com> # mlx4
Acked-by: Leon Romanovsky <leonro@mellanox.com> # mlx5
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Santosh Raspatur <santosh@chelsio.com>
Cc: Hariprasad S <hariprasad@chelsio.com>
Cc: Yishai Hadas <yishaih@mellanox.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: "Yan, Zheng" <zyan@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some nouveau regression fixes.
* 'linux-4.12' of git://github.com/skeggsb/linux:
drm/nouveau/fb/gf100-: Fix 32 bit wraparound in new ram detection
drm/nouveau/secboot/gm20b: fix the error return code in gm20b_secboot_tegra_read_wpr()
drm/nouveau/kms: Increase max retries in scanout position queries.
drm/nouveau/bios/bitP: check that table is long enough for optional pointers
drm/nouveau/fifo/nv40: no ctxsw for pre-nv44 mpeg engine
A missing u64 cast causes a 32-Bit wraparound from
4096 MiB to 0 MiB and therefore total 0 MiB VRAM detected
if card has 4096 Mib per FBP.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The error return code PTR_ERR(mc) is always 0 since mc is
equal to 0 in this error handling case.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
So far we only allowed for 1 retry and just failed the query
- and thereby high precision vblank timestamping - if we did
not get a reasonable result, as such a failure wasn't considered
all too horrible. There are a few NVidia gpu models out there which
may need a bit more than 1 retry to get a successful query result
under some conditions.
Since Linux 4.4 the update code for vblank counter and timestamp
in drm_update_vblank_count() changed so that the implementation
assumes that high precision vblank timestamping of a kms driver
either consistently succeeds or consistently fails for a given
video mode and encoder/connector combo. Iow. switching from success
to fail or vice versa on a modeset or connector change is ok, but
spurious temporary failure for a given setup can confuse the core
code and potentially cause bad miscounting of vblanks and confusion
or hangs in userspace clients which rely on vblank stuff, e.g.,
desktop compositors.
Therefore change the max retry count to a larger number - more than
any gpu so far is known to need to succeed, but still low enough
so that these queries which do also happen in vblank interrupt are
still fast enough to be not disastrously long if something would
go badly wrong with them.
As such sporadic retries only happen seldom even on affected gpu's,
this could mean a vblank irq could take a few dozen microseconds
longer every few hours of uptime -- better than a desktop compositor
randomly hanging every couple of hours or days of uptime in a hard
to reproduce manner.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Last drm-misc-next pull req for 4.12
Core changes:
- fb_helper checkpatch cleanup and simplified _add_one_connector() (Thierry)
- drm_ioctl and drm_sysfs improved/gained documentation (Daniel)
- [ABI] Repurpose reserved field in drm_event_vblank for crtc_id (Ander)
- Plumb acquire ctx through legacy paths to avoid lock_all and legacy_backoff
(Daniel)
- Add connector_atomic_check to check conn constraints on modeset (Maarten)
- Add drm_of_find_panel_or_bridge to remove boilerplate in drivers (Rob)
Driver changes:
- meson moved to drm-misc (Neil)
- Added support for Amlogic GX SoCs in dw-hdmi (Neil)
- Rockchip unbind actually cleans up the things bind initializes (Jeffy)
- A couple misc fixes in virtio, dw-hdmi
NOTE: this also includes a backmerge of drm-next as well rc5 (we needed vmwgfx
as well as the new synopsys media formats)
* tag 'drm-misc-next-2017-04-07' of git://anongit.freedesktop.org/git/drm-misc: (77 commits)
Revert "drm: Don't allow interruptions when opening debugfs/crc"
drm: Only take cursor locks when the cursor plane exists
drm/vmwgfx: Fix fbdev emulation using legacy functions
drm/rockchip: Shutdown all crtcs when unbinding drm
drm/rockchip: Reorder drm bind/unbind sequence
drm/rockchip: analogix_dp: Disable clock when unbinding
drm/rockchip: vop: Unprepare clocks when unbinding
drm/rockchip: vop: Enable pm domain before vop_initial
drm/rockchip: cdn-dp: Don't unregister audio dev when unbinding
drm/rockchip: cdn-dp: Don't try to release firmware when not loaded
drm: bridge: analogix: Destroy connector & encoder when unbinding
drm: bridge: analogix: Disable clock when unbinding
drm: bridge: analogix: Unregister dp aux when unbinding
drm: bridge: analogix: Detach panel when unbinding analogix dp
drm: Don't allow interruptions when opening debugfs/crc
drm/virtio: don't leak bo on drm_gem_object_init failure
drm: bridge: dw-hdmi: fix input format/encoding from plat_data
drm: omap: use common OF graph helpers
drm: convert drivers to use drm_of_find_panel_or_bridge
drm: convert drivers to use of_graph_get_remote_node
...
A few more things for 4.12:
- ttm and amdgpu support for non-contiguous vram CPU mappings
- lots of bug fixes and cleanups for vega10
- misc bug fixes and code cleanups
[airlied: fix do_div error on 32-bit arm, not sure it's 100% correct]
* 'drm-next-4.12' of git://people.freedesktop.org/~agd5f/linux: (58 commits)
drm/amdgpu: use uintptr_t instead of unsigned long to store pointer
drm/amdgpu: Avoid using signed integer to store pointer value
drm/amdgpu:invoke new implemented AI MB func
drm/amdgpu/vega10:timeout set to equal with VI
drm/amdgpu:implement the reset MB func for vega10
drm/amdgpu:fix typo for mxgpu_ai
drm/amdgpu:no need to involv HDP in KIQ
drm/amdgpu:add PSP block only load_type=PSP (v2)
drm/amdgpu/smu9: update to latest driver interface
drm/amd/amdgpu: cleanup gfx_v9_0_gpu_init()
drm/amd/amdgpu: cleanup gfx_v9_0_rlc_reset()
drm/amd/amdgpu: cleanup gfx_v9_0_rlc_start()
drm/amd/amdgpu: simplify gfx_v9_0_cp_gfx_enable()
drm/amd/amdgpu: cleanup gfx_v9_0_kiq_init_register()
drm/amd/amdgpu: Drop gfx_v9_0_print_status()
drm/amd/amdgpu: cleanup gfx_v9_0_set_gfx_eop_interrupt_state()
drm/amd/amdgpu: cleanup gfx_v9_0_set_priv_reg_fault_state()
drm/amd/amdgpu: cleanup gfx_v9_0_set_priv_inst_fault_state()
drm/amd/amdgpu: cleanup gfx_v9_0_init_queue()
drm/amdgpu: Move function amdgpu_has_atpx near other similar functions
...
Atomic helpers really want this instead of the hacked-up legacy
backoff trick, which unfortunately prevents drivers from using their
own private drm_modeset_locks.
Aside: There's a few atomic drivers (nv50, vc4, soon vmwgfx) which
don't yet use the new atomic color mgmt/gamma table stuff. Would be
nice if they could switch over and just hook up
drm_atomic_helper_legacy_gamma_set() instead.
Cc: Dave Airlie <airlied@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Eric Anholt <eric@anholt.net>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403083304.9083-13-daniel.vetter@ffwll.ch
It just doesn't work. It probably stopped working way, way before that
(e.g. i915 grabbed random mutexes all over in modeset code at least
since gen6), but with atomic and all the ww_mutex stuff it's indeed
hopeless.
Remove ->mode_set_base_atomic from the 2 atomic drivers (i915 and
nouveau) that still had one (both had dummy implementations already
anyway), and shunt atomic drivers in the helpers debug_enter/leave
functions.
I'll leave the code in for radeon and amdgpu, but I think as soon as
amdgpu is atomic we should think about just ripping it out. Only
having it around for radeon and pre-nv50 is rather pointless. This
would also allow us to nuke all that code from fbdev.
Funny part is that _all_ kms drivers set this hook, despite that no
one else provides the required ->mode_set_base_atomic implementation.
The reason I'm jumping on this is that I want to wire up a full
acquire ctx for the benefit of atomic drivers, everywhere. And the
debug_enter/leave implementations call ->gamma_set. And there's just
no way ever we can create an acquire_ctx in the nmi context of kgdb.
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403083304.9083-11-daniel.vetter@ffwll.ch
GP10B's power is managed by generic PM domains, so it does not require a
VDD regulator. Add this option into the chip function structure.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
GR is similar to GP100, with a few unavailable registers.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
GP10B requires a specific initialization sequence due to the absence of
devinit.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
GP10B's MC is compatible with GP100's, but engines need to be explicitly
put out of ELPG during init.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
GP10B's FB is largely compatible with the GP100 implementation.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
GP10B's FIFO is similar to GP100's, but only allows 512 channels.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The GP10B firmware is very close to GM20B's. The only difference is that
it supports booting multiple falcons. In order to avoid having too much
functions and structures shared, implement its support in the same
source file as GM20B firmware.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
GP10B's secboot is largely similar to GM20B's. Only differences are MC
base address and the fact that GPCCS is also securely managed.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Allow the MC base address to be specified as an argument for the WPR
region reading function. GP10B uses a different address layout as GM20B,
so this is necessary. Also export the function to be used by GP10B.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The LS firmware post-run hook is the right place to start said LS
firmware. Moving it here also allows to remove special handling in the
ACR code.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
A LS post-run hook can meet an error meaning the failure of secure boot.
Make sure this can be reported.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Having access to the secboot instance loading a LS firmware can be
useful to LS firmware handlers. At least more useful than just having an
out-of-context subdev pointer.
GP10B's firmware will also need to know the WPR address, which can be
obtained from the secboot instance.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Change the secboot and msgqueue interfaces to take a mask of falcons to
reset instead of a single falcon. The GP10B firmware interface requires
FECS and GPCCS to be booted in a single firmware command.
For firmwares that only support single falcon boot, it is trivial to
loop over the mask and boot each falcons individually.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The gk20a implementation of instance memory uses vmap()/vunmap() to map
memory regions into the kernel's virtual address space. These functions
may sleep, so protecting them by a spin lock is not safe. This triggers
a warning if the DEBUG_ATOMIC_SLEEP Kconfig option is enabled. Fix this
by using a mutex instead.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Forked from GP106 implementation.
Split out from commit enabling secboot/gr support so that it can be
added to earlier kernels.
Cc: stable@vger.kernel.org [4.10+]
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
When the atomic support was added to nouveau, the DRM core did not do this.
However, later in the same merge window, a commit (drm/fence: add in-fences
support) was merged that added it, leading to use-after-frees of the fence
object.
Cc: stable@vger.kernel.org [4.10+]
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The NV4A (aka NV44A) is an oddity in the family. It only comes in AGP
and PCI varieties, rather than a core PCIE chip with a bridge for
AGP/PCI as necessary. As a result, it appears that the MMU is also
non-functional. For AGP cards, the vast majority of the NV4A lineup,
this worked out since we force AGP cards to use the nv04 mmu. However
for PCI variants, this did not work.
Switching to the NV04 MMU makes it work like a charm. Thanks to mwk for
the suggestion. This should be a no-op for NV4A AGP boards, as they were
using it already.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70388
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This allows the driver to handle io_mem mappings on their own.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
An external Thunderbolt GPU can neither drive the laptop's panel nor be
powered off by the platform, so there's no point in registering it with
vga_switcheroo. In fact, when the external GPU is runtime suspended,
vga_switcheroo will cut power to the internal discrete GPU, resulting in
a lockup.
Cc: Ben Skeggs <bskeggs@redhat.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: http://patchwork.freedesktop.org/patch/msgid/8e733152b13e7c14501ad5af45c1c5c736584111.1489145162.git.lukas@wunner.de
Surprisingly a lot of legacy drivers roll their own, for
runtime pm and because vmwgfx.
Also make nouveau's set_config static while at it.
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-19-daniel.vetter@ffwll.ch
Again just going through the motions, no functional changes in here.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>t
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-12-daniel.vetter@ffwll.ch
Nouveau had a few direct calls to ->disable_plane, I replaced those
with drm_plane_force_disable. Same story for shmob.
Otherwise no code changes.
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-5-daniel.vetter@ffwll.ch
Just rolling it out, no code change here.
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Eric Anholt <eric@anholt.net>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-3-daniel.vetter@ffwll.ch
The trouble here is that it does multiple atomic commits under one
drm_modeset_lock_all, which breaks the behind-the-scenes acquire
context magic that function pulls off. It's much better to have one
overall atomic commit. That we still have multiple atomic commits
prevents us from adding some pretty useful debug checks to the atomic
machinery.
Hence it is really a bad idea to call the legacy
drm_crtc_force_disable_all() function. There's 2 atomic drivers using
this still, nouveau and tinydrm. To fix this, introduce a new
drm_atomic_helper_shutdown() by extracting the code from i915.
While at it improve kernel-doc and catch future offenders by
sprinkling a WARN_ON into the legacy function. We should probably move
those into the legacy modeset helpers, too ...
v2: Make it compile on arm drivers too (Noralf).
v3: Correct kerneldoc to point at _disable_all().
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170321164149.31531-1-daniel.vetter@ffwll.ch
Resync with drm-next, I have a patch which currently can't be applied
because drm-misc-next lacked the latest drm/i915 code.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
drm-misc for 4.12, 2nd attempt this week:
- topic branch from Jon Corbet for the new graph kerneldoc support
- lots of graphs for kms/atomic things using the above
- some vblank query tuning from Chris
- gem/cma_fops macros
- moar docs
Driver stuff:
- vc4 hdmi audio, yay (Eric)
- dw-hdmi polish from a bunch of people
- some rockchip dp updates that didn't make last week (Chris Zhong)
- misc bridge&driver updates
* tag 'drm-misc-next-2017-03-21' of git://anongit.freedesktop.org/git/drm-misc: (37 commits)
drm/edid: detect SCDC support in HF-VSDB
drm/edid: detect SCDC support in HF-VSDB
drm/edid: check for HF-VSDB block
drm: Add SCDC helpers
drm: bridge: dw-hdmi: add HDMI vendor specific infoframe config
drm/bridge: dw_hdmi: support i2c extended read mode
drm/msm: add stubs for msm_{perf,rd}_debugfs_cleanup
drm: bochs: Don't remove uninitialized fbdev framebuffer
drm: vc4: remove redundant check of plane being non-null
drm/vc4: use platform_register_drivers
dma-fence: add dma_fence_match_context helper
drm/vc4: Add HDMI audio support
dt-bindings: Document the dmas and dma-names properties for VC4 HDMI
drm/atmel-hlcdc: Fix suspend/resume implementation
drm: Skip the waitqueue setup for vblank queries
drm: Defer disabling the vblank IRQ until the next interrupt (for instant-off)
drm/doc: atomic overview, with graph
drm/doc: diagram for mode objects and properties
drm/doc: Consistent kerneldoc include order
drm/doc: Add KMS overview graphs
...
drm_dp_mst_allocate_vcpi() apart from setting up the vcpi structure,
also finds if there are enough slots available. This check is a duplicate
of that implemented in drm_dp_mst_find_vcpi_slots(). Let's move this check
out and reuse the existing drm_dp_mst_find_vcpi_slots() function to check
if there are enough vcpi slots before allocating them.
This brings the check to one place. Additionally drivers that will use MST
state tracking for atomic modesets can use the atomic version of
find_vcpi_slots() and reuse drm_dp_mst_allocate_vcpi()
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1489648231-30700-4-git-send-email-dhinakaran.pandiyan@intel.com
The msgqueue pointer validity should be checked by its owner, not by the
msgqueue code itself to avoid this situation.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Dave Airlie <airlied@redhat.com>
