At least when they have vblank support they need to call this, or the
vblank core will happily call into their crtc->enable_vblank callback
even when the crtc is off. Which leads to a boom when the clocks are
off on most hardware (besides the inevitable confusion in the
book-keeping).
The consistency checks in drm_vblank.c will then make sure that
vblank_off/on calls are balanced, and if drivers forget to re-enable
it all the commits will stall, so I think we're covered.
It'd be nice to be able to place this check outside of commit helpers,
but tha's not really possible (due to nonblocking commits and all
that). Placing it into atomic helpers should at least cover most
drivers.
Also note that vblank support is still optional (for virtual drivers,
which tend to not have this), check for that.
v2: Fixup the handling for vblank_put (Rob).
Cc: Rob Clark <robdclark@gmail.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171017152714.6849-1-daniel.vetter@ffwll.ch
The default VGA device is normally set in vga_arbiter_add_pci_device() when
we call it for the first enabled device that can be accessed with the
legacy VGA resources ([mem 0xa0000-0xbffff], etc.)
That default device can be overridden by an EFI device that owns the boot
framebuffer. As a fallback, we can also select a VGA device that can't be
accessed via legacy VGA resources, or a VGA device that isn't even enabled.
Factor out this EFI and fallback selection from vga_arb_device_init() into
a separate vga_arb_select_default_device() function. This doesn't change
any behavior, but it untangles the "bridge control possible" checking and
messages from the default device selection.
Tested-by: Zhou Wang <wangzhou1@hisilicon.com> # D05 Hisi Hip07, Hip08
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171013034729.14630.30419.stgit@bhelgaas-glaptop.roam.corp.google.com
Daniel Axtens reported that on the HiSilicon D05 board, the VGA device is
behind a bridge that doesn't support PCI_BRIDGE_CTL_VGA, so the VGA arbiter
never selects it as the default, which means Xorg auto-detection doesn't
work.
VGA is a legacy PCI feature: a VGA device can respond to addresses, e.g.,
[mem 0xa0000-0xbffff], [io 0x3b0-0x3bb], [io 0x3c0-0x3df], etc., that are
not configurable by BARs. Consequently, multiple VGA devices can conflict
with each other. The VGA arbiter avoids conflicts by ensuring that those
legacy resources are only routed to one VGA device at a time.
The arbiter identifies the "default VGA" device, i.e., a legacy VGA device
that was used by boot firmware. It selects the first device that:
- is of PCI_CLASS_DISPLAY_VGA,
- has both PCI_COMMAND_IO and PCI_COMMAND_MEMORY enabled, and
- has PCI_BRIDGE_CTL_VGA set in all upstream bridges.
Some systems don't have such a device. For example, if a host bridge
doesn't support I/O space, PCI_COMMAND_IO probably won't be enabled for any
devices below it. Or, as on the HiSilicon D05, the VGA device may be
behind a bridge that doesn't support PCI_BRIDGE_CTL_VGA, so accesses to the
legacy VGA resources will never reach the device.
This patch extends the arbiter so that if it doesn't find a device that
meets all the above criteria, it selects the first device that:
- is of PCI_CLASS_DISPLAY_VGA and
- has PCI_COMMAND_IO or PCI_COMMAND_MEMORY enabled
If it doesn't find even that, it selects the first device that:
- is of class PCI_CLASS_DISPLAY_VGA.
Such a device may not be able to use the legacy VGA resources, but most
drivers can operate the device without those. Setting it as the default
device means its "boot_vga" sysfs file will contain "1", which Xorg (via
libpciaccess) uses to help select its default output device.
This fixes Xorg auto-detection on some arm64 systems (HiSilicon D05 in
particular; see the link below).
It also replaces the powerpc fixup_vga() quirk, albeit with slightly
different semantics: the quirk selected the first VGA device we found, and
overrode that selection with any enabled VGA device we found. If there
were several enabled VGA devices, the *last* one we found would become the
default.
The code here instead selects the *first* enabled VGA device we find, and
if none are enabled, the first VGA device we find.
Link: http://lkml.kernel.org/r/20170901072744.2409-1-dja@axtens.net
Tested-by: Daniel Axtens <dja@axtens.net> # arm64, ppc64-qemu-tcg
Tested-by: Zhou Wang <wangzhou1@hisilicon.com> # D05 Hisi Hip07, Hip08
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171013034721.14630.65913.stgit@bhelgaas-glaptop.roam.corp.google.com
The A20 display pipeline has 2 frontends, 2 backends, and 2 TCONs.
This patch adds support (or a compatible string in the frontend's
case) for these components.
The TCONs support directly outputting to CPU/RGB/LVDS LCD panels,
or it can output to HDMI via an on-chip HDMI controller, or
CVBS/YPbPr/VGA signals via on-chip TV encoders. These additional
encoders are not covered in this patch.
Signed-off-by: Jonathan Liu <net147@gmail.com>
[wens@csie.org: Expand commit message]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171017121807.2994-6-wens@csie.org
The A10 display pipeline has 2 frontends, 2 backends, and 2 TCONs.
This patch adds support (or a compatible string in the frontend's
case) for these components.
The TCONs support directly outputting to CPU/RGB/LVDS LCD panels,
or it can output to HDMI via an on-chip HDMI controller, or
CVBS/YPbPr/VGA signals via on-chip TV encoders. These additional
encoders are not covered in this patch.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171017121807.2994-5-wens@csie.org
The HDMI controller in the A10 SoC is the same as the one currently
supported in the A10s. It has slightly different setup parameters.
Since these parameters are not thoroughly understood, we add support
for this variant by copying these parameters verbatim.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171017121807.2994-4-wens@csie.org
The A10 has two TCONs that are similar to the ones found on other SoCs.
Like the A31, TCON0 has a register used to mux the TCON outputs to the
downstream encoders. The bit fields are slightly different.
Signed-off-by: Jonathan Liu <net147@gmail.com>
[wens@csie.org: Reworked for A10 and fixed up commit message]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171017121807.2994-3-wens@csie.org
The backend has a mux to select the destination of the data to output
to. It can select the TCON or the frontends. On the A20, it includes
an option to output to the second TCON. This is not documented in the
user manual, but the vendor kernel uses it nevertheless, so the second
backend outputs to the second TCON.
Although the muxing can be changed on the fly, DRM needs to be able to
group a bunch of layers such that they get switched to another crtc
together. This is because the display backend does the layer compositing,
while the TCON generates the display timings. This constraint is not
supported by DRM.
Here we simply pair up backends and TCONs with the same ID.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171017121807.2994-2-wens@csie.org
Some channel0 setup has to be done, no matter what the output interface is
(RGB, CPU, LVDS). Move that code into a common function in order to avoid
duplication.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/183100/
So far, we've required all the TCON-connected encoders to call the TCON
enable and disable functions.
This was made this way because in the RGB/LVDS case, the TCON is the CRTC
and the encoder. However, in all the other cases (HDMI, TV, DSI, etc.), we
have another encoder down the road that needs to be programmed.
We also needed to know which channel the encoder is connected to, which is
encoder-specific.
The CRTC's enable and disable callbacks can work just fine for our use
case, and we can get the channel to use just by looking at the type of
encoder, since that is fixed. Implement those callbacks, which will
remove some of the encoder boilerplate.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/90b4396e19b3eca61b2ebfdae0672074b88ad74d.1508231063.git-series.maxime.ripard@free-electrons.com
The commit da82b8785e ("drm/sun4i: add components in breadth first
traversal order") implemented a breadth first traversal of our device tree
nodes graph. However, it was relying on the kernel linked lists, and those
are not really safe for addition.
Indeed, in a single pipeline stage, your first stage (ie, the mixer or
fronted) will be queued, and it will be the final iteration of that list as
far as list_for_each_entry_safe is concerned. Then, during that final
iteration, we'll queue another element (the TCON or the backend) that
list_for_each_entry_safe will not account for, and we will leave the loop
without having iterated over all the elements. And since we won't have
built our components list properly, the DRM driver will be left
non-functional.
We can instead use a kfifo to queue and enqueue components in-order, as was
the original intention. This also has the benefit of removing any dynamic
allocation, making the error handling path simpler too. The only thing
we're losing is the ability to tell whether an element has already been
queued, but that was only needed to remove spurious logs, and therefore
purely cosmetic.
This means that this commit effectively reverses e8afb7b67f ("drm/sun4i:
don't add components that are already in the queue").
Fixes: da82b8785e ("drm/sun4i: add components in breadth first traversal order")
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4ecb323e787918208f6a5d9f0ebba12c62583c98.1508231063.git-series.maxime.ripard@free-electrons.com
The display backend, as well as other peripherals that have a DRAM
clock gate and access DRAM directly, bypassing the system bus,
address the DRAM starting from 0x0, while physical addresses the
system uses starts from 0x40000000 (or 0x20000000 in A80's case).
This issue was witnessed on the Cubietruck, which has 2GB of RAM.
Devices with less RAM function normally due to the DRAM address
wrapping around. CMA seems to always allocate its buffer at a
very high address, close to the end of DRAM.
On a 1GB RAM device, the physical address would be something like
0x78000000. The DRAM address 0x78000000 would access the same DRAM
region as 0x38000000 on a system, as the DRAM address would only
span 0x0 ~ 0x3fffffff. The bit 0x40000000 is non-functional in this
case.
However on the Cubietruck, the DRAM is 2GB. The physical address
is 0x40000000 ~ 0xbfffffff. The buffer would be something like
0xb8000000. But the DRAM address span 0x0 ~ 0x7fffffff, meaning
the buffer address wraps around to 0x38000000, which is wrong.
The correct DRAM address for it should be 0x78000000.
Correct the address configured into the backend layer registers
by PHYS_OFFSET to account for this.
Fixes: 9026e0d122 ("drm: Add Allwinner A10 Display Engine support")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171017042349.31743-6-wens@csie.org
We still want to fail with -EBUSY if a plane or connector is part of
a commit, even if it will be assigned to a new commit.
This closes a small hole left open where we should return -EBUSY.
It's not severe, because wait_for_dependencies and swap_state helpers
still block. But it should return -EBUSY and not stall.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 21a01abbe3 ("drm/atomic: Fix freeing connector/plane state too early by tracking commits, v3.")
Link: https://patchwork.freedesktop.org/patch/msgid/20171016132928.6498-2-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Commit 669c9215af ("drm/atomic: Make async plane update checks work as
intended, v2.") forced planes to always be tracked, but forgot to
explicitly get the crtc commit from the new crtc when available.
This broke plane commit tracking, and caused kms_atomic_transitions
to randomly fail with -EBUSY.
Changes since v1:
- Prefer new_crtc_state->crtc above old_crtc_state->crtc.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 669c9215af ("drm/atomic: Make async plane update checks work as intended, v2.")
Cc: Gustavo Padovan <gustavo.padovan@collabora.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102671
Testcase: kms_atomic_transitions
Link: https://patchwork.freedesktop.org/patch/msgid/20171017052047.8983-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In order to implement plane leasing we need to count things,
just make the code consistent with the counting code currently
used for counting crtcs/encoders/connectors and drop the need
for num_overlay_planes.
v2: don't forget to assign plane_ptr. (keithp)
v3: use correct bounds check, found by igt.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Ka0T
-----END PGP SIGNATURE-----
Merge tag 'tilcdc-4.15' of https://github.com/jsarha/linux into drm-next
tilcdc changes for v4.15
* tag 'tilcdc-4.15' of https://github.com/jsarha/linux:
drm/tilcdc: Remove redundant OF_DETACHED flag setting
drm/tilcdc: Precalculate total frametime in tilcdc_crtc_set_mode()
drm/tilcdc: Use tilcdc_crtc_shutdown() in tilcdc_crtc_destroy()
drm/tilcdc: Remove WARN_ON(!drm_modeset_is_locked(&crtc->mutex)) checks
drm/tilcdc: Turn raster off in crtc reset, if it was on in the HW
drm/tilcdc: switch to drm_*{get,put} helpers
drm/tilcdc: tilcdc_tfp410: make of_device_ids const.
drm/tilcdc: tilcdc_panel: make of_device_ids const.
Quick 4.15 misc pull for the build fix:
Cross-subsystem Changes:
- piles an piles of misc/trivial patches all over, some more from
outreachy applicants
Core Changes:
- build fix for the bridge/of cleanup (Maarten)
- fix vblank count in arm_vblank_event (Ville)
- some kerneldoc typo fixes from Thierry
Driver Changes:
- vc4: Fix T-format tiling scanout, cleanup clock divider w/a (Anholt)
- sun4i: small cleanups and improved code comments all over (Chen-Yu
Tsai)
* tag 'drm-misc-next-2017-10-16' of git://anongit.freedesktop.org/drm/drm-misc: (21 commits)
drm/via: use ARRAY_SIZE
drm/gma500: use ARRAY_SIZE
drm/sun4i: hdmi: Move PAD_CTRL1 setting to mode_set function
drm/sun4i: hdmi: Document PAD_CTRL1 output invert bits
drm/sun4i: backend: Add comment explaining why registers are cleared
drm/sun4i: backend: Use drm_fb_cma_get_gem_addr() to get display memory
drm/sun4i: backend: Create regmap after access is possible
drm/sun4i: don't add components that are already in the queue
drm/vc4: Fix pitch setup for T-format scanout.
drm/vc4: Move the DSI clock divider workaround closer to the clock call.
drm: Replace kzalloc with kcalloc
drm/tinydrm: Remove explicit .best_encoder assignment
drm/tinydrm: Replace dev_error with DRM_DEV_ERROR
drm/drm_of: Move drm_of_panel_bridge_remove_function into header.
drm/atomic-helper: Fix reference to drm_crtc_send_vblank_event()
drm/atomic-helper: Fix typo
drm: Add missing __user annotation to drm_syncobj_array_find()
drm/rockchip: add PINCTRL dependency for LVDS
drm/kirin: Checking for IS_ERR() instead of NULL
driver:gpu: return -ENOMEM on allocation failure.
...
Now DRM/UDL driver retreives all edid data blocks instead of only base one.
Previous approch could lead to improper initialization of video mode with
certain monitors.
Signed-off-by: Robert Tarasov <tutankhamen@chromium.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171013001350.172155-2-tutankhamen@chromium.org
Fixed problem with DisplayLink and DisplayLink certified adapers in drm/udl
driver when adapter doesn't want to work if it was initialized with
disconnected DVI cable by enabling drm connectot polling and updating
current connector's state.
Signed-off-by: Robert Tarasov <tutankhamen@chromium.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171013001350.172155-1-tutankhamen@chromium.org
This patch replace instances of drm_framebuffer_reference/unreference with
*_get/put() suffixes, because get/put is shorter and consistent with the
kernel use of *_get/put suffixes.
This was done with the following Coccinelle script:
@r1@
expression e;
@@
(
-drm_framebuffer_reference(e);
+drm_framebuffer_get(e);
|
-drm_framebuffer_unreference(e);
+drm_framebuffer_put(e);
)
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/e1df1b3375faa819029559b11c32e10501c5c5d6.1505932812.git.hamohammed.sa@gmail.com
This patch replace instances of drm_gem_object_reference/unreference with
*_get/put() suffixes, because get/put is shorter and consistent with the
kernel use of *_get/put() suffixes.
This was done with the following Coccinelle script:
@r1@
expression e;
@@
(
-drm_gem_object_reference(e);
+drm_gem_object_get(e);
|
-drm_gem_object_unreference(e);
+drm_gem_object_put(e);
|
-drm_gem_object_unreference_unlocked(e);
+drm_gem_object_put_unlocked(e);
)
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
[resolved small conflict with removed armada_gem_dumb_map_offset]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/a59ef1ed109ade897bcffcb01b33214262db8942.1505932812.git.hamohammed.sa@gmail.com
drm_gem_cma_create() prints an error message when dma_alloc_wc() fails to
allocate the amount of memory we requested. This can lead to annoying
error messages when CMA is only one possible source of memory for the BO
allocation. Turn this error message into a debug one.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20171005112917.15949-1-boris.brezillon@free-electrons.com
Using the ARRAY_SIZE macro improves the readability of the code.
Found with Coccinelle with the following semantic patch:
@r depends on (org || report)@
type T;
T[] E;
position p;
@@
(
(sizeof(E)@p /sizeof(*E))
|
(sizeof(E)@p /sizeof(E[...]))
|
(sizeof(E)@p /sizeof(T))
)
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016023357.20174-1-jeremy.lefaure@lse.epita.fr
Using the ARRAY_SIZE macro improves the readability of the code. Also,
it is useless to re-invent it.
Found with Coccinelle with the following semantic patch:
@r depends on (org || report)@
type T;
T[] E;
position p;
@@
(
(sizeof(E)@p /sizeof(*E))
|
(sizeof(E)@p /sizeof(E[...]))
|
(sizeof(E)@p /sizeof(T))
)
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016023047.19145-1-jeremy.lefaure@lse.epita.fr
Initially we configured the PAD_CTRL1 register at probe/bind time.
However it seems the HDMI controller will modify some of the bits
in this register by itself. On the A10 it is particularly annoying
as it toggles the output invert bits, which inverts the colors on
the display output.
The U-boot driver this driver is based on sets this register twice,
though it seems it's only needed for actual display output. Hence
we move it to the mode_set function.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171014040252.9621-8-wens@csie.org
While debugging inverted color from the HDMI output on the A10, I
found that the lowest 3 bits were set. These were cleared on A20
boards that had normal display output. By manually toggling these
bits the mapping of the color components to these bits was found.
While these are not used anywhere, it would be nice to document
them somewhere.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171014040252.9621-7-wens@csie.org
Many of the backend's layer configuration registers have undefined
default values. This poses a risk as we use regmap_update_bits in
some places, and don't overwrite the whole register.
At probe/bind time we explicitly clear all the control registers
by writing 0 to them. This patch adds a more detailed explanation
on why we're doing this.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171014040252.9621-5-wens@csie.org
Commit 4636ce93d5 ("drm/fb-cma-helper: Add drm_fb_cma_get_gem_addr()")
adds a new helper, which covers fetching a drm_framebuffer's GEM object
and calculating the buffer address for a given plane.
This patch uses this helper to replace our own open coded version of the
same function.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171014040252.9621-4-wens@csie.org
The backend has various clocks and reset controls that need to be
enabled and deasserted before register access is possible.
Move the creation of the regmap to after the clocks and reset controls
have been configured where it makes more sense.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171014040252.9621-3-wens@csie.org
Even though the components framework can handle duplicate entries,
the extra entries cause a lot more debug messages to be generated,
which would be confusing to developers not familiar with our driver
and the framework in general.
Instead, we can scan the relatively small queue and check if the
component to be added is already queued up. Since the display
pipelines are symmetrical (not considering the third display
pipeline on the A80), and we add components level by level, when
we get to the second instance at the same level, any shared downstream
components would already be in the queue.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171014040252.9621-2-wens@csie.org
The documentation said to use src_w here, and I didn't consider that
we actually needed to be using pitch somewhere in our setup. Fixes
scanout on my DSI panel when X11 does initial setup with 1920x1080
HDMI and 800x480 DSI both at 0,0 of the same framebuffer.
v2: Add some comments requested by Boris
Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: 98830d91da ("drm/vc4: Add T-format scanout support.")
Link: https://patchwork.freedesktop.org/patch/msgid/20170927193209.11870-1-eric@anholt.net
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Most notable addition this time is the support for the GPU performance
counters by Christian. This has been in the making for some time and it
has matured a lot. Since this is adding UAPI, the corresponding WIP
userspace can be found at [1] mesa/libdrm repos. I expect that
Christian sends out the final userspace patches for this once you have
pulled the kernel bits.
Philipp optimized the probe path, so etnaviv gets out of the way for
systems that want to boot real quick.
I've done mostly cleanups, disentangling etnaviv from the IOMMU API,
with some MMUv1 optimizations on the way.
* 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux: (36 commits)
drm/etnaviv: remove unnecessary clock stabilization delay
drm/etnaviv: reduce reset delay
drm/etnaviv: remove unused function etnaviv_gem_new
drm/etnaviv: remove stale comment
drm/etnaviv: submit supports performance monitor requests
drm/etnaviv: enable debug registers on demand
drm/etnaviv: need to disable clock gating when doing profiling
drm/etnaviv: add MC perf domain
drm/etnaviv: add TX perf domain
drm/etnaviv: add RA perf domain
drm/etnaviv: add SE perf domain
drm/etnaviv: add PA perf domain
drm/etnaviv: add SH perf domain
drm/etnaviv: add PE perf domain
drm/etnaviv: add HI perf domain
drm/etnaviv: use 'sync points' for performance monitor requests
drm/etnaviv: clear alloced event
drm/etnaviv: add 'sync point' support
drm/etnaviv: add performance monitor request processing
drm/etnaviv: copy pmrs from userspace
...
We want the adjusted_mode->clock to be the actual clock we're
expecting to program, so that consumers see the right values for clock
and vrefresh.
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20170815234722.20700-1-eric@anholt.net
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Since the driver is relying on the atomic helpers, remove the explicit
.best_encoder assignment and let the core call
drm_atomic_helper_best_encoder().
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010205858.GA4806@Haneen
Core drm shouldn't depend on anything in drm-kms-helper, or the drm
module will fail to load.
insmod drm fails with
[ 6087.674390] drm: Unknown symbol drm_panel_bridge_remove (err 0)
which is defined in drm_kms_helper.ko
This call was added by commit c70087e8f1 ("drm/drm_of: add
drm_of_panel_bridge_remove function"), and the fix is defining it in the
drm_of.h header, to break the circular dependency.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8f95e623-9480-97dc-2414-77086d8aa49d@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@intel.com> #irc
Fixes: c70087e8f1 ("drm/drm_of: add drm_of_panel_bridge_remove function")
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Fix up this reference so that the proper link is generated in the
documentation and so that people don't go chasing after the wrong
function for an embarrassingly long time.
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171012140857.9559-1-thierry.reding@gmail.com
of_fdt_unflatten_tree() already sets the flag on this node to
OF_DETACHED, because of_fdt_unflatten_tree() calls
__unflatten_device_tree() with the detached bool set to true.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
We need the total frame refresh time to check if we are too close to
vertical sync when updating the two framebuffer DMA registers and risk
a collision. This new method is more accurate that the previous that
based on mode's vrefresh value, which itself is inaccurate or may not
even be initialized.
Reported-by: Kevin Hao <kexin.hao@windriver.com>
Fixes: 11abbc9f39 ("drm/tilcdc: Set framebuffer DMA address to HW only if CRTC is enabled")
Cc: <stable@vger.kernel.org> # v4.11+
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
More 4.15 drm-misc stuff:
Cross-subsystem Changes:
- bridge cleanup refactor (Benjamin Gaignard)
Core Changes:
- less surprising atomic iterators (Maarten), fixes an oops introduced
in drm-next
- better gem/fb helper docs (Noralf)
- fix dma-buf rcu races (Christian König)
Driver Changes:
- adv7511: CEC support (Hans Verkuil)
- sun4i update from Chen-Yu to improve hdmi and A31 support
- sii8620: add remote control support (Maceiej Purski)
New drivers:
- SiI9234 bridge driver (Maciej Purski)
- 7" rpi touch panel (Eric Anholt)
Note that this contains a topic pull from regmap, needed by the sun4i
changes. Mark Brown sent that out for pulling into drm-misc.
* tag 'drm-misc-next-2017-10-12' of git://anongit.freedesktop.org/drm/drm-misc: (29 commits)
drm/dp: WARN about invalid/unknown link rates and bw codes
drm/msm/mdp5: remove less than 0 comparison for unsigned value
drm/bridge/sii8620: add remote control support
drm/sun4i: hdmi: Add support for A31's HDMI controller
drm/sun4i: hdmi: Add A31 specific DDC register definitions
drm/sun4i: hdmi: Add support for controller hardware variants
dt-bindings: display: sun4i: Add binding for A31 HDMI controller
drm/sun4i: hdmi: Allow using second PLL as TMDS clk parent
drm/sun4i: hdmi: create a regmap for later use
drm/sun4i: hdmi: Disable clks in bind function error path and unbind function
drm/sun4i: tcon: Add support for demuxing TCON output on A31
drm/sun4i: tcon: Add variant callback for TCON output muxing
drm/bridge/synopsys: dsi :remove is_panel_bridge
drm/vc4: remove bridge from driver internal structure
drm/stm: ltdc: remove bridge from driver internal structure
drm/drm_of: add drm_of_panel_bridge_remove function
drm/bridge: make drm_panel_bridge_remove more robust
dma-fence: fix dma_fence_get_rcu_safe v2
dma-buf: make reservation_object_copy_fences rcu save
drm/atomic: Unref duplicated drm_atomic_state in drm_atomic_helper_resume()
...
