Use device managed functions to simplify error handling, reduce
source code size, improve readability, and reduce the likelyhood of bugs.
The conversion was done automatically with coccinelle using the
following semantic patches. The semantic patches and the scripts used
to generate this commit log are available at
https://github.com/groeck/coccinelle-patches
- Drop assignments to otherwise unused variables
- Drop remove function
- Drop platform_set_drvdata()
- Use devm_watchdog_register_driver() to register watchdog device
Acked-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use a local dev variable instead of dereferencing pdev->dev several
times in the probe function to make the code easier to read.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Enabling the clock before accessing chip registers and disabling it
afterwards does not really make sense and only adds complexity to
the driver. In addition to that, a comment int the driver suggests
that it does not serve a useful purpose either.
"The watchdog block is of course always clocked, the
clk_enable()/clk_disable() calls are mainly for performing reference
counting higher up in the clock hierarchy."
Just keep the clock enabled instead.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Checking if there is no error followed by a goto if there is one is
confusing. Reverse the logic.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use the infrastructure provided by the watchdog core to install
the restart handler.
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Platform data was already validated in the probe function. If it was NULL,
the remove function will never be called. Remove the unnecessary check.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The 'ret' variable in iTCO_wdt_init_module() does not add any value;
drop it.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use pdev for struct platform_device, pci_dev for struct pci_dev, and dev
for struct device variables to improve consistency.
Remove 'struct platform_device *dev;' from struct iTCO_wdt_private since
it was unused.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Using device managed resources simplifies error handling and cleanup,
and to reduce the likelyhood of errors.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Allocate private data and the watchdog device to avoid having
to clear it on remove and to enable subsequent simplifications.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Trivial fix to spelling mistake in WARN message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Building all watchdog drivers is all but impossible since many depend
on platforms which are not enabled by test builds. Add dependency on
COMPILE_TEST where possible to improve the situation.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
pnx833x_wdt does not compile if enabled. Bit operations expect an unsigned
long as argument. If that is fixed, the build still fails because put_user,
get_user, and copy_to_user are undefined.
Mark it as broken.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for the watchdog timer on PXI Embedded Controller.
Signed-off-by: Hui Chun Ong <hui.chun.ong@ni.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Declare watchdog_info structures as const as they are only stored in the
info field of watchdog_device structures. This field is of type const
struct watchdog_info *, so watchdog_info structures having this property
can be declared const too.
Done using Coccinelle:
@r1 disable optional_qualifier@
identifier i;
position p;
@@
static struct watchdog_info i@p={...};
@ok@
identifier r1.i;
position p;
struct watchdog_device obj;
@@
obj.info=&i@p;
@bad@
position p!={r1.p,ok.p};
identifier r1.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
+const
struct watchdog_info i;
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The object ident of type watchdog_info structure is not
modified after getting initialized by pikawdt_init. Apart from getting
referenced in init it is also passed as an argument to the function
copy_to_user but this argument is of type const void *. Therefore add
__ro_after_init to its declaration.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The object booke_wdt_info of watchdog_info structure is not
modified after getting initialized by booke_wdt_init. Apart from getting
referenced in init it is also stored in the info field of watchdog_device
structure which is of type const struct watchdog_info *info. So, it
becomes read only after init and therefore add __ro_after_init to it's
declaration.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The change corrects release of captured resources on error path, namely
the clock is disabled and put if misc device registration fails and not
enabled clock is not disabled now.
Fixes: 6924089c48 ("watchdog: sa11x0/pxa: get rid of get_clock_tick_rate")
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This patch updates my email address as I no longer have access to the old
one.
Signed-off-by: John Crispin <john@phrozen.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
What happens is that a write to /dev/sg is given a request with non-zero
->iovec_count combined with zero ->dxfer_len. Or with ->dxferp pointing
to an array full of empty iovecs.
Having write permission to /dev/sg shouldn't be equivalent to the
ability to trigger BUG_ON() while holding spinlocks...
Found by Dmitry Vyukov and syzkaller.
[ The BUG_ON() got changed to a WARN_ON_ONCE(), but this fixes the
underlying issue. - Linus ]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Don't crash the machine just because of an empty transfer. Use WARN_ON()
combined with returning an error.
Found by Dmitry Vyukov and syzkaller.
[ Changed to "WARN_ON_ONCE()". Al has a patch that should fix the root
cause, but a BUG_ON() is not acceptable in any case, and a WARN_ON()
might still be a cause of excessive log spamming.
NOTE! If this warning ever triggers, we may end up leaking resources,
since this doesn't bother to try to clean the command up. So this
WARN_ON_ONCE() triggering does imply real problems. But BUG_ON() is
much worse.
People really need to stop using BUG_ON() for "this shouldn't ever
happen". It makes pretty much any bug worse. - Linus ]
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: James Bottomley <jejb@linux.vnet.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If ip6_dst_lookup_tail has acquired a dst and fails the IPv4-mapped
check, release the dst before returning an error.
Fixes: ec5e3b0a1d ("ipv6: Inhibit IPv4-mapped src address on the wire.")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Two more bugfixes that came in during this week:
- one defconfig change to enable a vital driver used on some Qualcomm
based phones. This was already queued for 4.11, but the maintainer
asked to have it in 4.10 after all.
- One regression fix for the reset controller framework, this got
broken by a typo in the 4.10 merge window.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=M6/8
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"Two more bugfixes that came in during this week:
- a defconfig change to enable a vital driver used on some Qualcomm
based phones. This was already queued for 4.11, but the maintainer
asked to have it in 4.10 after all.
- a regression fix for the reset controller framework, this got
broken by a typo in the 4.10 merge window"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: multi_v7_defconfig: enable Qualcomm RPMCC
reset: fix shared reset triggered_count decrement on error
Pull ARM fixes from Russell King:
"A couple of fixes from Kees concerning problems he spotted with our
user access support"
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8658/1: uaccess: fix zeroing of 64-bit get_user()
ARM: 8657/1: uaccess: consistently check object sizes
Pull x86 fix from Thomas Gleixner:
"Make the build clean by working around yet another GCC stupidity"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vm86: Fix unused variable warning if THP is disabled
Pull locking fix from Thomas Gleixner:
"Move the futex init function to core initcall so user mode helper does
not run into an uninitialized futex syscall"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Move futex_init() to core_initcall
Pull timer fixes from Thomas Gleixner:
"Two small fixes::
- Prevent deadlock on the tick broadcast lock. Found and fixed by
Mike.
- Stop using printk() in the timekeeping debug code to prevent a
deadlock against the scheduler"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Use deferred printk() in debug code
tick/broadcast: Prevent deadlock on tick_broadcast_lock
Pull networking fixes from David Miller:
1) Fix leak in dpaa_eth error paths, from Dan Carpenter.
2) Use after free when using IPV6_RECVPKTINFO, from Andrey Konovalov.
3) fanout_release() cannot be invoked from atomic contexts, from Anoob
Soman.
4) Fix bogus attempt at lockdep annotation in IRDA.
5) dev_fill_metadata_dst() can OOP on a NULL dst cache pointer, from
Paolo Abeni.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
irda: Fix lockdep annotations in hashbin_delete().
vxlan: fix oops in dev_fill_metadata_dst
dccp: fix freeing skb too early for IPV6_RECVPKTINFO
dpaa_eth: small leak on error
packet: Do not call fanout_release from atomic contexts
Use rcuidle console tracepoint because, apparently, it may be issued
from an idle CPU:
hw-breakpoint: Failed to enable monitor mode on CPU 0.
hw-breakpoint: CPU 0 failed to disable vector catch
===============================
[ ERR: suspicious RCU usage. ]
4.10.0-rc8-next-20170215+ #119 Not tainted
-------------------------------
./include/trace/events/printk.h:32 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
RCU used illegally from idle CPU!
rcu_scheduler_active = 2, debug_locks = 0
RCU used illegally from extended quiescent state!
2 locks held by swapper/0/0:
#0: (cpu_pm_notifier_lock){......}, at: [<c0237e2c>] cpu_pm_exit+0x10/0x54
#1: (console_lock){+.+.+.}, at: [<c01ab350>] vprintk_emit+0x264/0x474
stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.10.0-rc8-next-20170215+ #119
Hardware name: Generic OMAP4 (Flattened Device Tree)
console_unlock
vprintk_emit
vprintk_default
printk
reset_ctrl_regs
dbg_cpu_pm_notify
notifier_call_chain
cpu_pm_exit
omap_enter_idle_coupled
cpuidle_enter_state
cpuidle_enter_state_coupled
do_idle
cpu_startup_entry
start_kernel
This RCU warning, however, is suppressed by lockdep_off() in printk().
lockdep_off() increments the ->lockdep_recursion counter and thus
disables RCU_LOCKDEP_WARN() and debug_lockdep_rcu_enabled(), which want
lockdep to be enabled "current->lockdep_recursion == 0".
Link: http://lkml.kernel.org/r/20170217015932.11898-1-sergey.senozhatsky@gmail.com
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: Tony Lindgren <tony@atomide.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Russell King <rmk@armlinux.org.uk>
Cc: <stable@vger.kernel.org> [3.4+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch enables the Qualcomm RPM based Clock Controller present on
A-family boards.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A nested lock depth was added to the hasbin_delete() code but it
doesn't actually work some well and results in tons of lockdep splats.
Fix the code instead to properly drop the lock around the operation
and just keep peeking the head of the hashbin queue.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull block layer fix from Jens Axboe:
"A single fix for a lockdep splat reported by Thomas and Gabriel"
* 'for-linus' of git://git.kernel.dk/linux-block:
cfq-iosched: don't call wbt_disable_default() with IRQs disabled
Since the commit 0c1d70af92 ("net: use dst_cache for vxlan device")
vxlan_fill_metadata_dst() calls vxlan_get_route() passing a NULL
dst_cache pointer, so the latter should explicitly check for
valid dst_cache ptr. Unfortunately the commit d71785ffc7 ("net: add
dst_cache to ovs vxlan lwtunnel") removed said check.
As a result is possible to trigger a null pointer access calling
vxlan_fill_metadata_dst(), e.g. with:
ovs-vsctl add-br ovs-br0
ovs-vsctl add-port ovs-br0 vxlan0 -- set interface vxlan0 \
type=vxlan options:remote_ip=192.168.1.1 \
options:key=1234 options:dst_port=4789 ofport_request=10
ip address add dev ovs-br0 172.16.1.2/24
ovs-vsctl set Bridge ovs-br0 ipfix=@i -- --id=@i create IPFIX \
targets=\"172.16.1.1:1234\" sampling=1
iperf -c 172.16.1.1 -u -l 1000 -b 10M -t 1 -p 1234
This commit addresses the issue passing to vxlan_get_route() the
dst_cache already available into the lwt info processed by
vxlan_fill_metadata_dst().
Fixes: d71785ffc7 ("net: add dst_cache to ovs vxlan lwtunnel")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the current DCCP implementation an skb for a DCCP_PKT_REQUEST packet
is forcibly freed via __kfree_skb in dccp_rcv_state_process if
dccp_v6_conn_request successfully returns.
However, if IPV6_RECVPKTINFO is set on a socket, the address of the skb
is saved to ireq->pktopts and the ref count for skb is incremented in
dccp_v6_conn_request, so skb is still in use. Nevertheless, it gets freed
in dccp_rcv_state_process.
Fix by calling consume_skb instead of doing goto discard and therefore
calling __kfree_skb.
Similar fixes for TCP:
fb7e2399ec [TCP]: skb is unexpectedly freed.
0aea76d35c tcp: SYN packets are now
simply consumed
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
One fix from Paul, we can not use the radix MMU under a hypervisor for now.
Although the current code checks if the processor supports radix, that is not
sufficient.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Q1P7
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"One fix from Paul: we can not use the radix MMU under a hypervisor for
now.
Although the code checked if the processor supports radix, that is not
sufficient"
* tag 'powerpc-4.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64: Disable use of radix under a hypervisor
Pull input fix from Dmitry Torokhov:
"Just a single change to Elan touchpad driver to recognize a new ACPI
ID"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: elan_i2c - add ELAN0605 to the ACPI table
Pull i2c fix from Wolfram Sang:
"I2C has a revert to fix a regression"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Revert "i2c: designware: detect when dynamic tar update is possible"
This should be >= instead of > here. It means that we don't increment
the free count enough so it becomes off by one.
Fixes: 9ad1a37493 ("dpaa_eth: add support for DPAA Ethernet")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Remove erroneous negation of the error check of the reset function
to decrement trigger_count in the error case, not on success. This
fixes shared resets to actually only trigger once, as intended.
-----BEGIN PGP SIGNATURE-----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=o2ta
-----END PGP SIGNATURE-----
Merge tag 'reset-for-4.10-fixes' of https://git.pengutronix.de/git/pza/linux into fixes
Pull "Reset controller fixes for v4.10" from Philipp Zabel:
- Remove erroneous negation of the error check of the reset function
to decrement trigger_count in the error case, not on success. This
fixes shared resets to actually only trigger once, as intended.
* tag 'reset-for-4.10-fixes' of https://git.pengutronix.de/git/pza/linux:
reset: fix shared reset triggered_count decrement on error
For a shared reset, when the reset is successful, the triggered_count is
incremented when trying to call the reset callback, so that another device
sharing the same reset line won't trigger it again. If the reset has not
been triggered successfully, the trigger_count should be decremented.
The code does the opposite, and decrements the trigger_count on success.
As a consequence, another device sharing the reset will be able to trigger
it again.
Fixed be removing negation in from of the error code of the reset function.
Fixes: 7da33a37b4 ("reset: allow using reset_control_reset with shared reset")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
On Skylake hardware, the link_poll isn't clearing the pending interrupt
bit. Adding a new function for SKX that handles clearing of status bit the
right way.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Fixes: 783dfa6c ("ntb: Adding Skylake Xeon NTB support")
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Fix typo causing ntb_transport_create_queue to select the first
queue every time, instead of using the next free queue.
Signed-off-by: Thomas VanSelus <tvanselus@xes-inc.com>
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Fixes: fce8a7bb5 ("PCI-Express Non-Transparent Bridge Support")
Signed-off-by: Jon Mason <jdmason@kudzu.us>
