2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 12:43:55 +08:00
Commit Graph

21 Commits

Author SHA1 Message Date
Markus Elfring
80c1bce9aa [media] au0828: Refactoring for start_urb_transfer()
This issue was detected by using the Coccinelle software.

1. Let us return directly if a buffer allocation failed.

2. Delete the jump label "err" then.

3. Drop the explicit initialisation for the variable "ret"
   at the beginning.

4. Return zero as a constant at the end.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-01 07:39:25 -02:00
Mauro Carvalho Chehab
0230d60e46 [media] dvbdev: Add RF connector if needed
Several pure digital TV devices have a frontend with the tuner
integrated on it. Add the RF connector when dvb_create_media_graph()
is called on such devices.

Tested with siano and dvb_usb_mxl111sf drivers.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-11 12:19:25 -02:00
Mauro Carvalho Chehab
0d3ab8410d [media] dvb core: must check dvb_create_media_graph()
If media controller is enabled and mdev is filled, it should
ensure that the media graph will be properly initialized.

Enforce that.

Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-11 12:18:59 -02:00
Rafael Lourenço de Lima Chehab
bed6919665 [media] au0828: Add support for media controller
Add support for analog and dvb tv using media controller.

Signed-off-by: Rafael Lourenço de Lima Chehab <chehabrafael@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-11 12:18:39 -02:00
Richard Vollkommer
52e269b133 [media] xc5000: add IF output level control
Adds control of the IF output level to the xc5000 tuner
configuration structure.  Increases the IF level to the
demodulator to fix failure to lock and picture breakup
issues (with the au8522 demodulator, in the case of the
Hauppauge HVR950Q).

This patch works with all XC5000 firmware versions.

Signed-off-by: Richard Vollkommer <linux@hauppauge.com>
Signed-off-by: Michael Ira Krufky <mkrufky@linuxtv.org>
Reviewed-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03 12:24:52 -02:00
Mauro Carvalho Chehab
f6b83c3e06 [media] au0828-dvb: use true/false for boolean vars
Instead of using 0 or 1 for boolean, use the true/false
defines.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-09-03 17:59:21 -03:00
Shuah Khan
66cae53024 [media] media: fix au0828 dvb suspend/resume to call dvb_frontend_suspend/resume
au0828 doesn't resume correctly and TV tuning fails with
xc_set_signal_source(0) failed message. Change au0828 dvb
suspend and resume interfaces to suspend and resume frontend
during suspend and resume respectively. dvb_frontend_suspend()
suspends tuner and fe using tuner and fe ops. dvb_frontend_resume()
resumes fe and tuner using fe and tuner ops ini before waking up
the frontend. With this change HVR950Q suspend and resume work
when system gets suspended when digital function is tuned to a
channel and with active TV stream, and after resume it went right
back to active TV stream.

Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-08-21 15:25:38 -05:00
Mauro Carvalho Chehab
2930977ac5 [media] au0828: Fix DVB resume when streaming
When DVB is streaming and suspend is called, it will call
au0828_stop_transport(), with will clean the streaming flag.

Due to that, stop_urb_transfer() will be called twice,
causing an oops.

So, we need another flag to be used at resume, telling it
to restart DVB.

While here, add a logic at stop_urb_transfer() to prevent
it of being called twice, and convert the usb_streaming
flag into boolean.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-08-21 15:25:10 -05:00
Mauro Carvalho Chehab
bbc62a18b6 [media] au0828: fix checks if dvb is initialized
dev->dvb is always not null, as it is an area at the dev
memory. So, checking if (dev->dvb) is always true.

Instead of this stupid check, what the code wants to do is
to know if the DVB was successully registered.

Fix it by checking, instead, for dvb->frontend. It should
also be sure that this var will be NULL if the device was
not properly initialized.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-08-21 15:25:10 -05:00
Mauro Carvalho Chehab
811872404b [media] au0828: add pr_info to track au0828 suspend/resume code
Suspend/resume conditions can be very tricky. Add some info
printk's to help tracking what's happening there.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-08-21 15:25:08 -05:00
Mauro Carvalho Chehab
83afb32aa9 [media] au0828: use pr_foo macros
Instead of using printk(KERN_foo, use pr_foo() macros.

No functional changes.

Note: we should do the same for dprintk(), but that would
require to remove the dprintk levels. So, for now, let's
not touch on it.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-08-21 15:25:08 -05:00
Mauro Carvalho Chehab
b799de75e0 [media] au0828: Add suspend code for DVB
The scheduled work should be cancelled during suspend.

At resume time, we need to set the frontend again. So,
add such logic to the driver.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-08-21 15:25:07 -05:00
Mauro Carvalho Chehab
a2668e10d7 [media] au0828-dvb: restore its permission to 644
A previous patch mistakenly changed the file permission to 755.
Restore it to 644.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-06-04 15:19:36 -03:00
Mauro Carvalho Chehab
f6fef86341 [media] au0828: reset streaming when a new frequency is set
As reported by Trevor, doing several opening/streaming/closing
operations to the demux causes it to fail.

I was able to simulate this bug too. I also noticed that,
sometimes, changing channels with au0828, the same thing
happens.

Most of the issues seem to be due to some hardware bug, that
causes the device to not fill all the URBs allocated. When
the bug happens, the only known fix is to either replug the
device, or to send an USB reset to it.

There's also a hack a the au0828 driver that starts a thread
that tries to reset the device when a package doesn't start
with a sync.

One of the culpits for this bad hardware behavior seem to be
caused by the lack of stopping and restarting the stream every
time a new channel is set.

This patch warrants that the stream will be properly reset
every time the set_frontend callback is called, partially
solving the problem.

A complete fix, however, would also need to check the PM
conditions for the tuner and demux.

Reported-by: Trevor Graffa <tlgraffa@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 17:50:02 -03:00
Mauro Carvalho Chehab
c35fbd03ae [media] au0828: Improve debug messages for urb_completion
Sometimes, it helps to know how much data was received by
urb_completion. Add that information to the optional debug
log.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 17:46:36 -03:00
Changbing Xiong
d9e091fe71 [media] au0828: Cancel stream-restart operation if frontend is disconnected
If the tuner is already disconnected, It is meaningless to go on doing the
stream-restart operation, It is better to cancel this operation.

Signed-off-by: Changbing Xiong <cb.xiong@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 17:45:55 -03:00
Wei Yongjun
793708ffff [media] au0828: Fix sparse non static symbol warning
Fixes the following sparse warning:

drivers/media/usb/au0828/au0828-dvb.c:36:5: warning:
 symbol 'preallocate_big_buffers' was not declared. Should it be static?

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-01-15 09:11:47 -02:00
Tim Mester
f251b3e78c [media] au0828: Add option to preallocate digital transfer buffers
Added command line parameter preallocate_big_buffers so that the digital
transfer buffers can be allocated when the driver is registered. They
do not have to be allocated every time a feed is started.

Signed-off-by: Tim Mester <tmester@ieee.org>
Acked-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-01-13 11:11:11 -02:00
Tim Mester
4609981f84 [media] au8028: Fix cleanup on kzalloc fail
Free what was allocated if there is a failure allocating
transfer buffers.

Stop the feed on a start feed error.  The stop feed is not always called
if start feed fails.  If the feed is not stopped on error, then the driver
will be stuck so that it can never start feeding again.

[m.chehab@samsung.com: CodingStyle cleanup]
Signed-off-by: Tim Mester <tmester@ieee.org>
Acked-by: Devin Heitmueller <dheitmueller@kernellabs.com>

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-01-13 11:05:57 -02:00
Mauro Carvalho Chehab
2e7b318fa1 [media] au0828-dvb: ret is never tested. Get rid of it
drivers/media/usb/au0828/au0828-dvb.c:275:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-28 07:39:02 -02:00
Mauro Carvalho Chehab
0c0d06cac6 [media] rename most media/video usb drivers to media/usb
Rename all USB drivers with their own directory under
drivers/media/video into drivers/media/usb and update the
building system.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-15 16:25:07 -03:00