mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-27 22:53:55 +08:00
78f57ef9d5
6081 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
c8372665b4 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from David Miller:
1) Disable RISCV BPF JIT builds when !MMU, from Björn Töpel.
2) nf_tables leaves dangling pointer after free, fix from Eric Dumazet.
3) Out of boundary write in __xsk_rcv_memcpy(), fix from Li RongQing.
4) Adjust icmp6 message source address selection when routes have a
preferred source address set, from Tim Stallard.
5) Be sure to validate HSR protocol version when creating new links,
from Taehee Yoo.
6) CAP_NET_ADMIN should be sufficient to manage l2tp tunnels even in
non-initial namespaces, from Michael Weiß.
7) Missing release firmware call in mlx5, from Eran Ben Elisha.
8) Fix variable type in macsec_changelink(), caught by KASAN. Fix from
Taehee Yoo.
9) Fix pause frame negotiation in marvell phy driver, from Clemens
Gruber.
10) Record RX queue early enough in tun packet paths such that XDP
programs will see the correct RX queue index, from Gilberto Bertin.
11) Fix double unlock in mptcp, from Florian Westphal.
12) Fix offset overflow in ARM bpf JIT, from Luke Nelson.
13) marvell10g needs to soft reset PHY when coming out of low power
mode, from Russell King.
14) Fix MTU setting regression in stmmac for some chip types, from
Florian Fainelli.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits)
amd-xgbe: Use __napi_schedule() in BH context
mISDN: make dmril and dmrim static
net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes
net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware mode
tipc: fix incorrect increasing of link window
Documentation: Fix tcp_challenge_ack_limit default value
net: tulip: make early_486_chipsets static
dt-bindings: net: ethernet-phy: add desciption for ethernet-phy-id1234.d400
ipv6: remove redundant assignment to variable err
net/rds: Use ERR_PTR for rds_message_alloc_sgs()
net: mscc: ocelot: fix untagged packet drops when enslaving to vlan aware bridge
selftests/bpf: Check for correct program attach/detach in xdp_attach test
libbpf: Fix type of old_fd in bpf_xdp_set_link_opts
libbpf: Always specify expected_attach_type on program load if supported
xsk: Add missing check on user supplied headroom size
mac80211: fix channel switch trigger from unknown mesh peer
mac80211: fix race in ieee80211_register_hw()
net: marvell10g: soft-reset the PHY when coming out of low power
net: marvell10g: report firmware version
net/cxgb4: Check the return from t4_query_params properly
...
|
||
|
Linus Torvalds
|
b753101a4a |
Kbuild updates for v5.7 (2nd)
- raise minimum supported binutils version to 2.23
- remove old CONFIG_AS_* macros that we know binutils >= 2.23 supports
- move remaining CONFIG_AS_* tests to Kconfig from Makefile
- enable -Wtautological-compare warnings to catch more issues
- do not support GCC plugins for GCC <= 4.7
- fix various breakages of 'make xconfig'
- include the linker version used for linking the kernel into
LINUX_COMPILER, which is used for the banner, and also exposed to
/proc/version
- link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y,
which allows us to remove the lib-ksyms.o workaround, and to
solve the last known issue of the LLVM linker
- add dummy tools in scripts/dummy-tools/ to enable all compiler
tests in Kconfig, which will be useful for distro maintainers
- support the single switch, LLVM=1 to use Clang and all LLVM utilities
instead of GCC and Binutils.
- support LLVM_IAS=1 to enable the integrated assembler, which is still
experimental
-----BEGIN PGP SIGNATURE-----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=jpyF
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- raise minimum supported binutils version to 2.23
- remove old CONFIG_AS_* macros that we know binutils >= 2.23 supports
- move remaining CONFIG_AS_* tests to Kconfig from Makefile
- enable -Wtautological-compare warnings to catch more issues
- do not support GCC plugins for GCC <= 4.7
- fix various breakages of 'make xconfig'
- include the linker version used for linking the kernel into
LINUX_COMPILER, which is used for the banner, and also exposed to
/proc/version
- link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y, which
allows us to remove the lib-ksyms.o workaround, and to solve the last
known issue of the LLVM linker
- add dummy tools in scripts/dummy-tools/ to enable all compiler tests
in Kconfig, which will be useful for distro maintainers
- support the single switch, LLVM=1 to use Clang and all LLVM utilities
instead of GCC and Binutils.
- support LLVM_IAS=1 to enable the integrated assembler, which is still
experimental
* tag 'kbuild-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (36 commits)
kbuild: fix comment about missing include guard detection
kbuild: support LLVM=1 to switch the default tools to Clang/LLVM
kbuild: replace AS=clang with LLVM_IAS=1
kbuild: add dummy toolchains to enable all cc-option etc. in Kconfig
kbuild: link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y
MIPS: fw: arc: add __weak to prom_meminit and prom_free_prom_memory
kbuild: remove -I$(srctree)/tools/include from scripts/Makefile
kbuild: do not pass $(KBUILD_CFLAGS) to scripts/mkcompile_h
Documentation/llvm: fix the name of llvm-size
kbuild: mkcompile_h: Include $LD version in /proc/version
kconfig: qconf: Fix a few alignment issues
kconfig: qconf: remove some old bogus TODOs
kconfig: qconf: fix support for the split view mode
kconfig: qconf: fix the content of the main widget
kconfig: qconf: Change title for the item window
kconfig: qconf: clean deprecated warnings
gcc-plugins: drop support for GCC <= 4.7
kbuild: Enable -Wtautological-compare
x86: update AS_* macros to binutils >=2.23, supporting ADX and AVX2
crypto: x86 - clean up poly1305-x86_64-cryptogams.S by 'make clean'
...
|
||
David S. Miller
|
40fc7ad2c8 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says: ==================== pull-request: bpf 2020-04-10 The following pull-request contains BPF updates for your *net* tree. We've added 13 non-merge commits during the last 7 day(s) which contain a total of 13 files changed, 137 insertions(+), 43 deletions(-). The main changes are: 1) JIT code emission fixes for riscv and arm32, from Luke Nelson and Xi Wang. 2) Disable vmlinux BTF info if GCC_PLUGIN_RANDSTRUCT is used, from Slava Bacherikov. 3) Fix oob write in AF_XDP when meta data is used, from Li RongQing. 4) Fix bpf_get_link_xdp_id() handling on single prog when flags are specified, from Andrey Ignatov. 5) Fix sk_assign() BPF helper for request sockets that can have sk_reuseport field uninitialized, from Joe Stringer. 6) Fix mprotect() test case for the BPF LSM, from KP Singh. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Linus Torvalds
|
9b06860d7c |
libnvdimm for 5.7
- Add support for region alignment configuration and enforcement to
fix compatibility across architectures and PowerPC page size
configurations.
- Introduce 'zero_page_range' as a dax operation. This facilitates
filesystem-dax operation without a block-device.
- Introduce phys_to_target_node() to facilitate drivers that want to
know resulting numa node if a given reserved address range was
onlined.
- Advertise a persistence-domain for of_pmem and papr_scm. The
persistence domain indicates where cpu-store cycles need to reach in
the platform-memory subsystem before the platform will consider them
power-fail protected.
- Promote numa_map_to_online_node() to a cross-kernel generic facility.
- Save x86 numa information to allow for node-id lookups for reserved
memory ranges, deploy that capability for the e820-pmem driver.
- Pick up some miscellaneous minor fixes, that missed v5.6-final,
including a some smatch reports in the ioctl path and some unit test
compilation fixups.
- Fixup some flexible-array declarations.
-----BEGIN PGP SIGNATURE-----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=sY4N
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm and dax updates from Dan Williams:
"There were multiple touches outside of drivers/nvdimm/ this round to
add cross arch compatibility to the devm_memremap_pages() interface,
enhance numa information for persistent memory ranges, and add a
zero_page_range() dax operation.
This cycle I switched from the patchwork api to Konstantin's b4 script
for collecting tags (from x86, PowerPC, filesystem, and device-mapper
folks), and everything looks to have gone ok there. This has all
appeared in -next with no reported issues.
Summary:
- Add support for region alignment configuration and enforcement to
fix compatibility across architectures and PowerPC page size
configurations.
- Introduce 'zero_page_range' as a dax operation. This facilitates
filesystem-dax operation without a block-device.
- Introduce phys_to_target_node() to facilitate drivers that want to
know resulting numa node if a given reserved address range was
onlined.
- Advertise a persistence-domain for of_pmem and papr_scm. The
persistence domain indicates where cpu-store cycles need to reach
in the platform-memory subsystem before the platform will consider
them power-fail protected.
- Promote numa_map_to_online_node() to a cross-kernel generic
facility.
- Save x86 numa information to allow for node-id lookups for reserved
memory ranges, deploy that capability for the e820-pmem driver.
- Pick up some miscellaneous minor fixes, that missed v5.6-final,
including a some smatch reports in the ioctl path and some unit
test compilation fixups.
- Fixup some flexible-array declarations"
* tag 'libnvdimm-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (29 commits)
dax: Move mandatory ->zero_page_range() check in alloc_dax()
dax,iomap: Add helper dax_iomap_zero() to zero a range
dax: Use new dax zero page method for zeroing a page
dm,dax: Add dax zero_page_range operation
s390,dcssblk,dax: Add dax zero_page_range operation to dcssblk driver
dax, pmem: Add a dax operation zero_page_range
pmem: Add functions for reading/writing page to/from pmem
libnvdimm: Update persistence domain value for of_pmem and papr_scm device
tools/test/nvdimm: Fix out of tree build
libnvdimm/region: Fix build error
libnvdimm/region: Replace zero-length array with flexible-array member
libnvdimm/label: Replace zero-length array with flexible-array member
ACPI: NFIT: Replace zero-length array with flexible-array member
libnvdimm/region: Introduce an 'align' attribute
libnvdimm/region: Introduce NDD_LABELING
libnvdimm/namespace: Enforce memremap_compat_align()
libnvdimm/pfn: Prevent raw mode fallback if pfn-infoblock valid
libnvdimm: Out of bounds read in __nd_ioctl()
acpi/nfit: improve bounds checking for 'func'
mm/memremap_pages: Introduce memremap_compat_align()
...
|
||
Jason A. Donenfeld
|
e6abef610c |
x86: update AS_* macros to binutils >=2.23, supporting ADX and AVX2
Now that the kernel specifies binutils 2.23 as the minimum version, we can remove ifdefs for AVX2 and ADX throughout. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> |
||
Masahiro Yamada
|
92203b0280 |
x86: remove always-defined CONFIG_AS_SSSE3
CONFIG_AS_SSSE3 was introduced by commit |
||
|
Masahiro Yamada
|
06bd48b6cd |
lib/raid6/test: fix build on distros whose /bin/sh is not bash
You can build a user-space test program for the raid6 library code,
like this:
$ cd lib/raid6/test
$ make
The command in $(shell ...) function is evaluated by /bin/sh by default.
(or, you can specify the shell by passing SHELL=<shell> from command line)
Currently '>&/dev/null' is used to sink both stdout and stderr. Because
this code is bash-ism, it only works when /bin/sh is a symbolic link to
bash (this is the case on RHEL etc.)
This does not work on Ubuntu where /bin/sh is a symbolic link to dash.
I see lots of
/bin/sh: 1: Syntax error: Bad fd number
and
warning "your version of binutils lacks ... support"
Replace it with portable '>/dev/null 2>&1'.
Fixes:
|
||
Qiujun Huang
|
29b46fa3dc |
lib/Kconfig.debug: fix a typo "capabilitiy" -> "capability"
s/capabilitiy/capability Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/1585818594-27373-1-git-send-email-hqjagain@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Kees Cook
|
ef065653e5 |
ubsan: include bug type in report header
When syzbot tries to figure out how to deduplicate bug reports, it prefers seeing a hint about a specific bug type (we can do better than just "UBSAN"). This lifts the handler reason into the UBSAN report line that includes the file path that tripped a check. Unfortunately, UBSAN does not provide function names. Suggested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Elena Petrova <lenaptr@google.com> Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com> Link: http://lkml.kernel.org/r/20200227193516.32566-7-keescook@chromium.org Link: https://lore.kernel.org/lkml/CACT4Y+bsLJ-wFx_TaXqax3JByUOWB3uk787LsyMVcfW6JzzGvg@mail.gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Kees Cook
|
1d28c8d6d0 |
ubsan: check panic_on_warn
Syzkaller expects kernel warnings to panic when the panic_on_warn sysctl is set. More work is needed here to have UBSan reuse the WARN infrastructure, but for now, just check the flag manually. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Elena Petrova <lenaptr@google.com> Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com> Link: https://lore.kernel.org/lkml/CACT4Y+bsLJ-wFx_TaXqax3JByUOWB3uk787LsyMVcfW6JzzGvg@mail.gmail.com Link: http://lkml.kernel.org/r/20200227193516.32566-5-keescook@chromium.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Kees Cook
|
277a10850f |
ubsan: split "bounds" checker from other options
In order to do kernel builds with the bounds checker individually
available, introduce CONFIG_UBSAN_BOUNDS, with the remaining options under
CONFIG_UBSAN_MISC.
For example, using this, we can start to expand the coverage syzkaller is
providing. Right now, all of UBSan is disabled for syzbot builds because
taken as a whole, it is too noisy. This will let us focus on one feature
at a time.
For the bounds checker specifically, this provides a mechanism to
eliminate an entire class of array overflows with close to zero
performance overhead (I cannot measure a difference). In my (mostly)
defconfig, enabling bounds checking adds ~4200 checks to the kernel.
Performance changes are in the noise, likely due to the branch predictors
optimizing for the non-fail path.
Some notes on the bounds checker:
- it does not instrument {mem,str}*()-family functions, it only
instruments direct indexed accesses (e.g. "foo[i]"). Dealing with
the {mem,str}*()-family functions is a work-in-progress around
CONFIG_FORTIFY_SOURCE[1].
- it ignores flexible array members, including the very old single
byte (e.g. "int foo[1];") declarations. (Note that GCC's
implementation appears to ignore _all_ trailing arrays, but Clang only
ignores empty, 0, and 1 byte arrays[2].)
[1] https://github.com/KSPP/linux/issues/6
[2] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=92589
Suggested-by: Elena Petrova <lenaptr@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Link: http://lkml.kernel.org/r/20200227193516.32566-3-keescook@chromium.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Kees Cook
|
0887a7ebc9 |
ubsan: add trap instrumentation option
Patch series "ubsan: Split out bounds checker", v5.
This splits out the bounds checker so it can be individually used. This
is enabled in Android and hopefully for syzbot. Includes LKDTM tests for
behavioral corner-cases (beyond just the bounds checker), and adjusts
ubsan and kasan slightly for correct panic handling.
This patch (of 6):
The Undefined Behavior Sanitizer can operate in two modes: warning
reporting mode via lib/ubsan.c handler calls, or trap mode, which uses
__builtin_trap() as the handler. Using lib/ubsan.c means the kernel image
is about 5% larger (due to all the debugging text and reporting structures
to capture details about the warning conditions). Using the trap mode,
the image size changes are much smaller, though at the loss of the
"warning only" mode.
In order to give greater flexibility to system builders that want minimal
changes to image size and are prepared to deal with kernel code being
aborted and potentially destabilizing the system, this introduces
CONFIG_UBSAN_TRAP. The resulting image sizes comparison:
text data bss dec hex filename
19533663 6183037 18554956 44271656 2a38828 vmlinux.stock
19991849 7618513 18874448 46484810 2c54d4a vmlinux.ubsan
19712181 6284181 18366540 44362902
|
||
Nathan Chancellor
|
8306b057a8 |
lib/dynamic_debug.c: use address-of operator on section symbols
Clang warns:
../lib/dynamic_debug.c:1034:24: warning: array comparison always
evaluates to false [-Wtautological-compare]
if (__start___verbose == __stop___verbose) {
^
1 warning generated.
These are not true arrays, they are linker defined symbols, which are just
addresses. Using the address of operator silences the warning and does
not change the resulting assembly with either clang/ld.lld or gcc/ld
(tested with diff + objdump -Dr).
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Jason Baron <jbaron@akamai.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/894
Link: http://lkml.kernel.org/r/20200220051320.10739-1-natechancellor@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
Dan Carpenter
|
8f0259c27c |
lib/test_kmod.c: remove a NULL test
The "info" pointer has already been dereferenced so checking here is too late. Fortunately, we never pass NULL pointers to the test_kmod_put_module() function so the test can simply be removed. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Link: http://lkml.kernel.org/r/20200228092452.vwkhthsn77nrxdy6@kili.mountain Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
chenqiwu
|
8d994cada2 |
lib/rbtree: fix coding style of assignments
Leave blank space between the right-hand and left-hand side of the assignment to meet the kernel coding style better. Signed-off-by: chenqiwu <chenqiwu@xiaomi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Michel Lespinasse <walken@google.com> Link: http://lkml.kernel.org/r/1582621140-25850-1-git-send-email-qiwuchen55@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Andy Shevchenko
|
caa7f776cc |
lib/test_bitmap.c: make use of EXP2_IN_BITS
Commit
|
||
Alexander Potapenko
|
505a0ef15f |
kasan: stackdepot: move filter_irq_stacks() to stackdepot.c
filter_irq_stacks() can be used by other tools (e.g. KMSAN), so it needs to be moved to a common location. lib/stackdepot.c seems a good place, as filter_irq_stacks() is usually applied to the output of stack_trace_save(). This patch has been previously mailed as part of KMSAN RFC patch series. [glider@google.co: nds32: linker script: add SOFTIRQENTRY_TEXT\ Link: http://lkml.kernel.org/r/20200311121002.241430-1-glider@google.com [glider@google.com: add IRQENTRY_TEXT and SOFTIRQENTRY_TEXT to linker script] Link: http://lkml.kernel.org/r/20200311121124.243352-1-glider@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Link: http://lkml.kernel.org/r/20200220141916.55455-3-glider@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Alexander Potapenko
|
7b65942fb2 |
lib/stackdepot.c: build with -fno-builtin
Clang may replace stackdepot_memcmp() with a call to instrumented bcmp(), which is exactly what we wanted to avoid creating stackdepot_memcmp(). Building the file with -fno-builtin prevents such optimizations. This patch has been previously mailed as part of KMSAN RFC patch series. Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Link: http://lkml.kernel.org/r/20200220141916.55455-2-glider@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Alexander Potapenko
|
69866e156c |
lib/stackdepot.c: check depot_index before accessing the stack slab
Avoid crashes on corrupted stack ids. Despite stack ID corruption may indicate other bugs in the program, we'd better fail gracefully on such IDs instead of crashing the kernel. This patch has been previously mailed as part of KMSAN RFC patch series. Link: http://lkml.kernel.org/r/20200220141916.55455-1-glider@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> From: Dan Carpenter <dan.carpenter@oracle.com> Subject: lib/stackdepot.c: fix a condition in stack_depot_fetch() We should check for a NULL pointer first before adding the offset. Otherwise if the pointer is NULL and the offset is non-zero, it will lead to an Oops. Fixes: d45048e65a59 ("lib/stackdepot.c: check depot_index before accessing the stack slab") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Alexander Potapenko <glider@google.com> Link: http://lkml.kernel.org/r/20200312113006.GA20562@mwanda Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Kees Cook
|
9cf016e6b4 |
lib: test_stackinit.c: XFAIL switch variable init tests
The tests for initializing a variable defined between a switch statement's test and its first "case" statement are currently not initialized in Clang[1] nor the proposed auto-initialization feature in GCC. We should retain the test (so that we can evaluate compiler fixes), but mark it as an "expected fail". The rest of the kernel source will be adjusted to avoid this corner case. Also disable -Wswitch-unreachable for the test so that the intentionally broken code won't trigger warnings for GCC (nor future Clang) when initialization happens this unhandled place. [1] https://bugs.llvm.org/show_bug.cgi?id=44916 Suggested-by: Alexander Potapenko <glider@google.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Jann Horn <jannh@google.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Link: http://lkml.kernel.org/r/202002191358.2897A07C6@keescook Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Geert Uytterhoeven
|
6e85318521 |
lib/scatterlist: fix sg_copy_buffer() kerneldoc
Add the missing closing parenthesis to the description for the to_buffer parameter of sg_copy_buffer(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Akinobu Mita <akinobu.mita@gmail.com Link: http://lkml.kernel.org/r/20200212084241.8778-1-geert+renesas@glider.be Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Gustavo A. R. Silva
|
51022f8715 |
lib/ts_kmp.c: replace zero-length array with flexible-array member
The current codebase makes use of the zero-length array language extension
to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning in
case the flexible array does not occur last in the structure, which will
help us prevent some kind of undefined behavior bugs from being
inadvertenly introduced[3] to the codebase from now on.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit
|
||
|
Gustavo A. R. Silva
|
842ae1f52b |
lib/ts_fsm.c: replace zero-length array with flexible-array member
The current codebase makes use of the zero-length array language extension
to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning in
case the flexible array does not occur last in the structure, which will
help us prevent some kind of undefined behavior bugs from being
inadvertenly introduced[3] to the codebase from now on.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit
|
||
|
Gustavo A. R. Silva
|
c6e2ac3b47 |
lib/ts_bm.c: replace zero-length array with flexible-array member
The current codebase makes use of the zero-length array language extension
to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning in
case the flexible array does not occur last in the structure, which will
help us prevent some kind of undefined behavior bugs from being
inadvertenly introduced[3] to the codebase from now on.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit
|
||
|
Gustavo A. R. Silva
|
a44ce51370 |
lib/bch.c: replace zero-length array with flexible-array member
The current codebase makes use of the zero-length array language extension
to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning in
case the flexible array does not occur last in the structure, which will
help us prevent some kind of undefined behavior bugs from being
inadvertenly introduced[3] to the codebase from now on.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit
|
||
Konstantin Khlebnikov
|
aecd42df6d |
lib/test_lockup.c: add parameters for locking generic vfs locks
file_path=<path> defines file or directory to open lock_inode=Y set lock_rwsem_ptr to inode->i_rwsem lock_mapping=Y set lock_rwsem_ptr to mapping->i_mmap_rwsem lock_sb_umount=Y set lock_rwsem_ptr to sb->s_umount This gives safe and simple way to see how system reacts to contention of common vfs locks and how syscalls depend on them directly or indirectly. For example to block s_umount for 60 seconds: # modprobe test_lockup file_path=. lock_sb_umount time_secs=60 state=S This is useful for checking/testing scalability issues like this: https://lore.kernel.org/lkml/158497590858.7371.9311902565121473436.stgit@buzz/ Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Colin Ian King <colin.king@canonical.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Kees Cook <keescook@chromium.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Sasha Levin <sashal@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/158498153964.5621.83061779039255681.stgit@buzz Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Colin Ian King
|
ad3f434b87 |
lib/test_lockup.c: fix spelling mistake "iteraions" -> "iterations"
There is a spelling mistake in a pr_notice message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Kees Cook <keescook@chromium.org> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Sasha Levin <sashal@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20200221155145.79522-1-colin.king@canonical.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Konstantin Khlebnikov
|
30428ef5d1 |
lib/test_lockup: test module to generate lockups
CONFIG_TEST_LOCKUP=m adds module "test_lockup" that helps to make sure
that watchdogs and lockup detectors are working properly.
Depending on module parameters test_lockup could emulate soft or hard
lockup, "hung task", hold arbitrary lock, allocate bunch of pages.
Also it could generate series of lockups with cooling-down periods, in
this way it could be used as "ping" for locks or page allocator. Loop
checks signals between iteration thus could be stopped by ^C.
# modinfo test_lockup
...
parm: time_secs:lockup time in seconds, default 0 (uint)
parm: time_nsecs:nanoseconds part of lockup time, default 0 (uint)
parm: cooldown_secs:cooldown time between iterations in seconds, default 0 (uint)
parm: cooldown_nsecs:nanoseconds part of cooldown, default 0 (uint)
parm: iterations:lockup iterations, default 1 (uint)
parm: all_cpus:trigger lockup at all cpus at once (bool)
parm: state:wait in 'R' running (default), 'D' uninterruptible, 'K' killable, 'S' interruptible state (charp)
parm: use_hrtimer:use high-resolution timer for sleeping (bool)
parm: iowait:account sleep time as iowait (bool)
parm: lock_read:lock read-write locks for read (bool)
parm: lock_single:acquire locks only at one cpu (bool)
parm: reacquire_locks:release and reacquire locks/irq/preempt between iterations (bool)
parm: touch_softlockup:touch soft-lockup watchdog between iterations (bool)
parm: touch_hardlockup:touch hard-lockup watchdog between iterations (bool)
parm: call_cond_resched:call cond_resched() between iterations (bool)
parm: measure_lock_wait:measure lock wait time (bool)
parm: lock_wait_threshold:print lock wait time longer than this in nanoseconds, default off (ulong)
parm: disable_irq:disable interrupts: generate hard-lockups (bool)
parm: disable_softirq:disable bottom-half irq handlers (bool)
parm: disable_preempt:disable preemption: generate soft-lockups (bool)
parm: lock_rcu:grab rcu_read_lock: generate rcu stalls (bool)
parm: lock_mmap_sem:lock mm->mmap_sem: block procfs interfaces (bool)
parm: lock_rwsem_ptr:lock rw_semaphore at address (ulong)
parm: lock_mutex_ptr:lock mutex at address (ulong)
parm: lock_spinlock_ptr:lock spinlock at address (ulong)
parm: lock_rwlock_ptr:lock rwlock at address (ulong)
parm: alloc_pages_nr:allocate and free pages under locks (uint)
parm: alloc_pages_order:page order to allocate (uint)
parm: alloc_pages_gfp:allocate pages with this gfp_mask, default GFP_KERNEL (uint)
parm: alloc_pages_atomic:allocate pages with GFP_ATOMIC (bool)
parm: reallocate_pages:free and allocate pages between iterations (bool)
Parameters for locking by address are unsafe and taints kernel. With
CONFIG_DEBUG_SPINLOCK=y they at least check magics for embedded spinlocks.
Examples:
task hang in D-state:
modprobe test_lockup time_secs=1 iterations=60 state=D
task hang in io-wait D-state:
modprobe test_lockup time_secs=1 iterations=60 state=D iowait
softlockup:
modprobe test_lockup time_secs=1 iterations=60 state=R
hardlockup:
modprobe test_lockup time_secs=1 iterations=60 state=R disable_irq
system-wide hardlockup:
modprobe test_lockup time_secs=1 iterations=60 state=R \
disable_irq all_cpus
rcu stall:
modprobe test_lockup time_secs=1 iterations=60 state=R \
lock_rcu touch_softlockup
lock mmap_sem / block procfs interfaces:
modprobe test_lockup time_secs=1 iterations=60 state=S lock_mmap_sem
lock tasklist_lock for read / block forks:
TASKLIST_LOCK=$(awk '$3 == "tasklist_lock" {print "0x"$1}' /proc/kallsyms)
modprobe test_lockup time_secs=1 iterations=60 state=R \
disable_irq lock_read lock_rwlock_ptr=$TASKLIST_LOCK
lock namespace_sem / block vfs mount operations:
NAMESPACE_SEM=$(awk '$3 == "namespace_sem" {print "0x"$1}' /proc/kallsyms)
modprobe test_lockup time_secs=1 iterations=60 state=S \
lock_rwsem_ptr=$NAMESPACE_SEM
lock cgroup mutex / block cgroup operations:
CGROUP_MUTEX=$(awk '$3 == "cgroup_mutex" {print "0x"$1}' /proc/kallsyms)
modprobe test_lockup time_secs=1 iterations=60 state=S \
lock_mutex_ptr=$CGROUP_MUTEX
ping cgroup_mutex every second and measure maximum lock wait time:
modprobe test_lockup cooldown_secs=1 iterations=60 state=S \
lock_mutex_ptr=$CGROUP_MUTEX reacquire_locks measure_lock_wait
[linux@roeck-us.net: rename disable_irq to fix build error]
Link: http://lkml.kernel.org/r/20200317133614.23152-1-linux@roeck-us.net
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Link: http://lkml.kernel.org/r/158132859146.2797.525923171323227836.stgit@buzz
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Masahiro Yamada
|
889b3c1245 |
compiler: remove CONFIG_OPTIMIZE_INLINING entirely
Commit
|
||
|
Linus Torvalds
|
aa1a8ce533 |
New tracing features:
- The ring buffer is no longer disabled when reading the trace file.
The trace_pipe file was made to be used for live tracing and reading
as it acted like the normal producer/consumer. As the trace file
would not consume the data, the easy way of handling it was to just
disable writes to the ring buffer. This came to a surprise to the
BPF folks who complained about lost events due to reading.
This is no longer an issue. If someone wants to keep the old disabling
there's a new option "pause-on-trace" that can be set.
- New set_ftrace_notrace_pid file. PIDs in this file will not be traced
by the function tracer. Similar to set_ftrace_pid, which makes the
function tracer only trace those tasks with PIDs in the file, the
set_ftrace_notrace_pid does the reverse.
- New set_event_notrace_pid file. PIDs in this file will cause events
not to be traced if triggered by a task with a matching PID.
Similar to the set_event_pid file but will not be traced.
Note, sched_waking and sched_switch events may still be trace if
one of the tasks referenced by those events contains a PID that
is allowed to be traced.
Tracing related features:
- New bootconfig option, that is attached to the initrd file.
If bootconfig is on the command line, then the initrd file
is searched looking for a bootconfig appended at the end.
- New GPU tracepoint infrastructure to help the gfx drivers to get
off debugfs (acked by Greg Kroah-Hartman)
Other minor updates and fixes.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXokgWRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qgrHAP0UkKs/52JY4oWa3OIh/OqK+vnCrIwz
zGvDFOYM0fKbwgD9FZWgzlcaYK5m2Cxlhp4VoraZveHMLJUhnEHtdX6X0wk=
=Rebj
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"New tracing features:
- The ring buffer is no longer disabled when reading the trace file.
The trace_pipe file was made to be used for live tracing and
reading as it acted like the normal producer/consumer. As the trace
file would not consume the data, the easy way of handling it was to
just disable writes to the ring buffer.
This came to a surprise to the BPF folks who complained about lost
events due to reading. This is no longer an issue. If someone wants
to keep the old disabling there's a new option "pause-on-trace"
that can be set.
- New set_ftrace_notrace_pid file. PIDs in this file will not be
traced by the function tracer.
Similar to set_ftrace_pid, which makes the function tracer only
trace those tasks with PIDs in the file, the set_ftrace_notrace_pid
does the reverse.
- New set_event_notrace_pid file. PIDs in this file will cause events
not to be traced if triggered by a task with a matching PID.
Similar to the set_event_pid file but will not be traced. Note,
sched_waking and sched_switch events may still be traced if one of
the tasks referenced by those events contains a PID that is allowed
to be traced.
Tracing related features:
- New bootconfig option, that is attached to the initrd file.
If bootconfig is on the command line, then the initrd file is
searched looking for a bootconfig appended at the end.
- New GPU tracepoint infrastructure to help the gfx drivers to get
off debugfs (acked by Greg Kroah-Hartman)
And other minor updates and fixes"
* tag 'trace-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (27 commits)
tracing: Do not allocate buffer in trace_find_next_entry() in atomic
tracing: Add documentation on set_ftrace_notrace_pid and set_event_notrace_pid
selftests/ftrace: Add test to test new set_event_notrace_pid file
selftests/ftrace: Add test to test new set_ftrace_notrace_pid file
tracing: Create set_event_notrace_pid to not trace tasks
ftrace: Create set_ftrace_notrace_pid to not trace tasks
ftrace: Make function trace pid filtering a bit more exact
ftrace/kprobe: Show the maxactive number on kprobe_events
tracing: Have the document reflect that the trace file keeps tracing enabled
ring-buffer/tracing: Have iterator acknowledge dropped events
tracing: Do not disable tracing when reading the trace file
ring-buffer: Do not disable recording when there is an iterator
ring-buffer: Make resize disable per cpu buffer instead of total buffer
ring-buffer: Optimize rb_iter_head_event()
ring-buffer: Do not die if rb_iter_peek() fails more than thrice
ring-buffer: Have rb_iter_head_event() handle concurrent writer
ring-buffer: Add page_stamp to iterator for synchronization
ring-buffer: Rename ring_buffer_read() to read_buffer_iter_advance()
ring-buffer: Have ring_buffer_empty() not depend on tracing stopped
tracing: Save off entry when peeking at next entry
...
|
||
|
Linus Torvalds
|
0ad5b053d4 |
Char/Misc driver patches for 5.7-rc1
Here is the big set of char/misc/other driver patches for 5.7-rc1. Lots of things in here, and it's later than expected due to some reverts to resolve some reported issues. All is now clean with no reported problems in linux-next. Included in here is: - interconnect updates - mei driver updates - uio updates - nvmem driver updates - soundwire updates - binderfs updates - coresight updates - habanalabs updates - mhi new bus type and core - extcon driver updates - some Kconfig cleanups - other small misc driver cleanups and updates As mentioned, all have been in linux-next for a while, and with the last two reverts, all is calm and good. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXodfvA8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynzCQCfROhar3E8EhYEqSOP6xq6uhX9uegAnRgGY2rs rN4JJpOcTddvZcVlD+vo =ocWk -----END PGP SIGNATURE----- Merge tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char/misc/other driver patches for 5.7-rc1. Lots of things in here, and it's later than expected due to some reverts to resolve some reported issues. All is now clean with no reported problems in linux-next. Included in here is: - interconnect updates - mei driver updates - uio updates - nvmem driver updates - soundwire updates - binderfs updates - coresight updates - habanalabs updates - mhi new bus type and core - extcon driver updates - some Kconfig cleanups - other small misc driver cleanups and updates As mentioned, all have been in linux-next for a while, and with the last two reverts, all is calm and good" * tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (174 commits) Revert "driver core: platform: Initialize dma_parms for platform devices" Revert "amba: Initialize dma_parms for amba devices" amba: Initialize dma_parms for amba devices driver core: platform: Initialize dma_parms for platform devices bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device() bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM capture bus: mhi: core: Add support for reading MHI info from device misc: rtsx: set correct pcr_ops for rts522A speakup: misc: Use dynamic minor numbers for speakup devices mei: me: add cedar fork device ids coresight: do not use the BIT() macro in the UAPI header Documentation: provide IBM contacts for embargoed hardware nvmem: core: remove nvmem_sysfs_get_groups() nvmem: core: use is_bin_visible for permissions nvmem: core: use device_register and device_unregister nvmem: core: add root_only member to nvmem device struct extcon: axp288: Add wakeup support extcon: Mark extcon_get_edev_name() function as exported symbol extcon: palmas: Hide error messages if gpio returns -EPROBE_DEFER dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format ... |
||
|
Linus Torvalds
|
ff2ae607c6 |
SPDX patches for 5.7-rc1.
Here are 3 SPDX patches for 5.7-rc1. One fixes up the SPDX tag for a single driver, while the other two go through the tree and add SPDX tags for all of the .gitignore files as needed. Nothing too complex, but you will get a merge conflict with your current tree, that should be trivial to handle (one file modified by two things, one file deleted.) All 3 of these have been in linux-next for a while, with no reported issues other than the merge conflict. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXodg5A8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykySQCgy9YDrkz7nWq6v3Gohl6+lW/L+rMAnRM4uTZm m5AuCzO3Azt9KBi7NL+L =2Lm5 -----END PGP SIGNATURE----- Merge tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX updates from Greg KH: "Here are three SPDX patches for 5.7-rc1. One fixes up the SPDX tag for a single driver, while the other two go through the tree and add SPDX tags for all of the .gitignore files as needed. Nothing too complex, but you will get a merge conflict with your current tree, that should be trivial to handle (one file modified by two things, one file deleted.) All three of these have been in linux-next for a while, with no reported issues other than the merge conflict" * tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: ASoC: MT6660: make spdxcheck.py happy .gitignore: add SPDX License Identifier .gitignore: remove too obvious comments |
||
Slava Bacherikov
|
7d32e69310 |
kbuild, btf: Fix dependencies for DEBUG_INFO_BTF
Currently turning on DEBUG_INFO_SPLIT when DEBUG_INFO_BTF is also
enabled will produce invalid btf file, since gen_btf function in
link-vmlinux.sh script doesn't handle *.dwo files.
Enabling DEBUG_INFO_REDUCED will also produce invalid btf file,
and using GCC_PLUGIN_RANDSTRUCT with BTF makes no sense.
Fixes:
|
||
|
Linus Torvalds
|
ac438771cc |
Merge branch 'for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu
Pull percpu updates from Dennis Zhou: "This is just a few documentation fixes for percpu refcount and bitmap helpers that went in v5.6, and moving my emails to all be at korg" * 'for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu: percpu: update copyright emails to dennis@kernel.org include/bitmap.h: add new functions to documentation include/bitmap.h: add missing parameter in docs percpu_ref: Fix comment regarding percpu_ref_init flags |
||
|
Linus Torvalds
|
6cad420cc6 |
Merge branch 'akpm' (patches from Andrew)
Merge updates from Andrew Morton:
"A large amount of MM, plenty more to come.
Subsystems affected by this patch series:
- tools
- kthread
- kbuild
- scripts
- ocfs2
- vfs
- mm: slub, kmemleak, pagecache, gup, swap, memcg, pagemap, mremap,
sparsemem, kasan, pagealloc, vmscan, compaction, mempolicy,
hugetlbfs, hugetlb"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (155 commits)
include/linux/huge_mm.h: check PageTail in hpage_nr_pages even when !THP
mm/hugetlb: fix build failure with HUGETLB_PAGE but not HUGEBTLBFS
selftests/vm: fix map_hugetlb length used for testing read and write
mm/hugetlb: remove unnecessary memory fetch in PageHeadHuge()
mm/hugetlb.c: clean code by removing unnecessary initialization
hugetlb_cgroup: add hugetlb_cgroup reservation docs
hugetlb_cgroup: add hugetlb_cgroup reservation tests
hugetlb: support file_region coalescing again
hugetlb_cgroup: support noreserve mappings
hugetlb_cgroup: add accounting for shared mappings
hugetlb: disable region_add file_region coalescing
hugetlb_cgroup: add reservation accounting for private mappings
mm/hugetlb_cgroup: fix hugetlb_cgroup migration
hugetlb_cgroup: add interface for charge/uncharge hugetlb reservations
hugetlb_cgroup: add hugetlb_cgroup reservation counter
hugetlbfs: Use i_mmap_rwsem to address page fault/truncate race
hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization
mm/memblock.c: remove redundant assignment to variable max_addr
mm: mempolicy: require at least one nodeid for MPOL_PREFERRED
mm: mempolicy: use VM_BUG_ON_VMA in queue_pages_test_walk()
...
|
||
Walter Wu
|
98f3b56fa6 |
kasan: add test for invalid size in memmove
Test negative size in memmove in order to verify whether it correctly get KASAN report. Casting negative numbers to size_t would indeed turn up as a large size_t, so it will have out-of-bounds bug and be detected by KASAN. [walter-zh.wu@mediatek.com: fix -Wstringop-overflow warning] Link: http://lkml.kernel.org/r/20200311134244.13016-1-walter-zh.wu@mediatek.com Signed-off-by: Walter Wu <walter-zh.wu@mediatek.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: kernel test robot <lkp@intel.com> Link: http://lkml.kernel.org/r/20191112065313.7060-1-walter-zh.wu@mediatek.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
193bc55b6d |
XArray updates for 5.7-rc1
- Fix two bugs which affected multi-index entries larger than 2^26 indices - Fix some documentation - Remove unused IDA macros - Add a small optimisation for tiny configurations - Fix a bug which could cause an RCU walker to terminate a marked walk early -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAl6DT1YACgkQDpNsjXcp gj4GqAf/fVxinQwhlxF2UGVho67JgXpQklHtJi7uLUbdxEqueU1miz9W5rLfRUs5 JP8+7ahwkV4lfphzf8FhfGkQmc3aWFsPLjpicnH1y0Mei0C24mYZgAO0ZA+S1o+5 HZJ82jb8QtAHrhlnHZcwC20Q0bq5Q/HWVMfdv9YmZlBV0U4E/lUaZtpSc1T0Hcjt 7faT8QWeudEwraklp0lRq2AFVJainbH4Xcyr7EHMcZySRfk7p6bgLlQ6QbHbjcsh IdtbbR/xOkC9eLX5WtDSzVg1q5AS3l0Fegu14A+/OuyXnsJYe1vF43jw9xId/V2u Wn+GRbeBxV3flQWK+8PoVvlQCsY4fw== =O2iY -----END PGP SIGNATURE----- Merge tag 'xarray-5.7' of git://git.infradead.org/users/willy/linux-dax Pull XArray updates from Matthew Wilcox: - Fix two bugs which affected multi-index entries larger than 2^26 indices - Fix some documentation - Remove unused IDA macros - Add a small optimisation for tiny configurations - Fix a bug which could cause an RCU walker to terminate a marked walk early * tag 'xarray-5.7' of git://git.infradead.org/users/willy/linux-dax: xarray: Fix early termination of xas_for_each_marked radix tree test suite: Support kmem_cache alignment XArray: Optimise xas_sibling() if !CONFIG_XARRAY_MULTI ida: remove abandoned macros XArray: Fix incorrect comment in header file XArray: Fix xas_pause for large multi-index entries XArray: Fix xa_find_next for large multi-index entries |
||
|
Linus Torvalds
|
668f1e9267 |
linux-kselftest-kunit-5.7-rc1
This kunit update for Linux-5.7-rc1 consists of:
- debugfs support for displaying kunit test suite results; this is
especially useful for module-loaded tests to allow disentangling of
test result display from other dmesg events. CONFIG_KUNIT_DEBUGFS
enables/disables the debugfs support.
- Several fixes and improvements to kunit framework and tool.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAl6Ez+4ACgkQCwJExA0N
QxzMBA//fxXD9tUtmc8ePFmbvcdTbb9QxhXP+HYNvAP5xzEGr4UzxGj4yLPv6PfG
V/dlpFmPRxN4FjAreYWLz8j+2MRq+Yn7gti9Lv8IOmIc7LXIqOijzrAqax+kd3zt
pcXoQY92gJOewhEMaAFmGaXwJ7Dd2clBNwmgTjOs0RMOMh3nCctwkbEK+0vowlfG
PcB2sCkdLMGptJBi6IxHHAAddcGCo29LzufzfYbub1gOK2K9lH0xC+2E31lmFR87
loAGtKebtQFkMj2Y9Ynrq+hdK0uZ4lhdDgYBSH7IZUXc4tOEMhFGPxVDiEJN3xf0
NZFeajqFHov9GueixGOxm4fkHe+AneW5OQvKsKM0kQiNaGv9oi995FUfA0qDc4Bt
Gd+Cv1bJ44+Cg0K7PE/TjIrCmBMy/xbSvnB/uhDkSDBZOElOHzyO4nz6XxfBmQpM
SwGTBKweNkHubYw/pzU3WrEoby0dmOEXg3twjCzLAL790AcpJNT3VPq8HfWvAs/a
NgBcdnKQw1Ex3Ph08mWNrSG3/kmioplNK8dXz893uC/uK/Oj2WMsp8AnunDqT1Rz
20Ypx6g/vMGHqG2zenvNTs3IVOb0NlSSHj4rInreCRR4HDAu/Gl0ka+ZC3wqmcui
uxL4/8qfIFftGWxaxbk0bW1+mamUcyvOThd9aULUlayEp3CQP70=
=5w9O
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
"This kunit update consists of:
- debugfs support for displaying kunit test suite results.
This is especially useful for module-loaded tests to allow
disentangling of test result display from other dmesg events.
CONFIG_KUNIT_DEBUGFS enables/disables the debugfs support.
- Several fixes and improvements to kunit framework and tool"
* tag 'linux-kselftest-kunit-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tool: add missing test data file content
kunit: update documentation to describe debugfs representation
kunit: subtests should be indented 4 spaces according to TAP
kunit: add log test
kunit: add debugfs /sys/kernel/debug/kunit/<suite>/results display
Documentation: kunit: Make the KUnit documentation less UML-specific
Fix linked-list KUnit test when run multiple times
kunit: kunit_tool: Allow .kunitconfig to disable config items
kunit: Always print actual pointer values in asserts
kunit: add --make_options
kunit: Run all KUnit tests through allyesconfig
kunit: kunit_parser: make parser more robust
|
||
|
Linus Torvalds
|
29d9f30d4c |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from David Miller:
"Highlights:
1) Fix the iwlwifi regression, from Johannes Berg.
2) Support BSS coloring and 802.11 encapsulation offloading in
hardware, from John Crispin.
3) Fix some potential Spectre issues in qtnfmac, from Sergey
Matyukevich.
4) Add TTL decrement action to openvswitch, from Matteo Croce.
5) Allow paralleization through flow_action setup by not taking the
RTNL mutex, from Vlad Buslov.
6) A lot of zero-length array to flexible-array conversions, from
Gustavo A. R. Silva.
7) Align XDP statistics names across several drivers for consistency,
from Lorenzo Bianconi.
8) Add various pieces of infrastructure for offloading conntrack, and
make use of it in mlx5 driver, from Paul Blakey.
9) Allow using listening sockets in BPF sockmap, from Jakub Sitnicki.
10) Lots of parallelization improvements during configuration changes
in mlxsw driver, from Ido Schimmel.
11) Add support to devlink for generic packet traps, which report
packets dropped during ACL processing. And use them in mlxsw
driver. From Jiri Pirko.
12) Support bcmgenet on ACPI, from Jeremy Linton.
13) Make BPF compatible with RT, from Thomas Gleixnet, Alexei
Starovoitov, and your's truly.
14) Support XDP meta-data in virtio_net, from Yuya Kusakabe.
15) Fix sysfs permissions when network devices change namespaces, from
Christian Brauner.
16) Add a flags element to ethtool_ops so that drivers can more simply
indicate which coalescing parameters they actually support, and
therefore the generic layer can validate the user's ethtool
request. Use this in all drivers, from Jakub Kicinski.
17) Offload FIFO qdisc in mlxsw, from Petr Machata.
18) Support UDP sockets in sockmap, from Lorenz Bauer.
19) Fix stretch ACK bugs in several TCP congestion control modules,
from Pengcheng Yang.
20) Support virtual functiosn in octeontx2 driver, from Tomasz
Duszynski.
21) Add region operations for devlink and use it in ice driver to dump
NVM contents, from Jacob Keller.
22) Add support for hw offload of MACSEC, from Antoine Tenart.
23) Add support for BPF programs that can be attached to LSM hooks,
from KP Singh.
24) Support for multiple paths, path managers, and counters in MPTCP.
From Peter Krystad, Paolo Abeni, Florian Westphal, Davide Caratti,
and others.
25) More progress on adding the netlink interface to ethtool, from
Michal Kubecek"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2121 commits)
net: ipv6: rpl_iptunnel: Fix potential memory leak in rpl_do_srh_inline
cxgb4/chcr: nic-tls stats in ethtool
net: dsa: fix oops while probing Marvell DSA switches
net/bpfilter: remove superfluous testing message
net: macb: Fix handling of fixed-link node
net: dsa: ksz: Select KSZ protocol tag
netdevsim: dev: Fix memory leak in nsim_dev_take_snapshot_write
net: stmmac: add EHL 2.5Gbps PCI info and PCI ID
net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID
net: stmmac: create dwmac-intel.c to contain all Intel platform
net: dsa: bcm_sf2: Support specifying VLAN tag egress rule
net: dsa: bcm_sf2: Add support for matching VLAN TCI
net: dsa: bcm_sf2: Move writing of CFP_DATA(5) into slicing functions
net: dsa: bcm_sf2: Check earlier for FLOW_EXT and FLOW_MAC_EXT
net: dsa: bcm_sf2: Disable learning for ASP port
net: dsa: b53: Deny enslaving port 7 for 7278 into a bridge
net: dsa: b53: Prevent tagged VLAN on port 7 for 7278
net: dsa: b53: Restore VLAN entries upon (re)configuration
net: dsa: bcm_sf2: Fix overflow checks
hv_netvsc: Remove unnecessary round_up for recv_completion_cnt
...
|
||
|
Linus Torvalds
|
1f944f976d |
TTY/Serial patches for 5.7-rc1
Here is the big set of TTY / Serial patches for 5.7-rc1 Lots of console fixups and reworking in here, serial core tweaks (doesn't that ever get old, why are we still creating new serial devices?), serial driver updates, line-protocol driver updates, and some vt cleanups and fixes included in here as well. All have been in linux-next with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXoHT8w8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+yl3CwCgj/97IKb4K49nV2rDgiV+t/ELWqUAnjBp+Zpd H2BEdhwCFhq/5CJHKXWH =JTm1 -----END PGP SIGNATURE----- Merge tag 'tty-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here is the big set of TTY / Serial patches for 5.7-rc1 Lots of console fixups and reworking in here, serial core tweaks (doesn't that ever get old, why are we still creating new serial devices?), serial driver updates, line-protocol driver updates, and some vt cleanups and fixes included in here as well. All have been in linux-next with no reported issues" * tag 'tty-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (161 commits) serial: 8250: Optimize irq enable after console write serial: 8250: Fix rs485 delay after console write vt: vt_ioctl: fix use-after-free in vt_in_use() vt: vt_ioctl: fix VT_DISALLOCATE freeing in-use virtual console tty: serial: make SERIAL_SPRD depend on COMMON_CLK tty: serial: fsl_lpuart: fix return value checking tty: serial: fsl_lpuart: move dma_request_chan() ARM: dts: tango4: Make /serial compatible with ns16550a ARM: dts: mmp*: Make the serial ports compatible with xscale-uart ARM: dts: mmp*: Fix serial port names ARM: dts: mmp2-brownstone: Don't redeclare phandle references ARM: dts: pxa*: Make the serial ports compatible with xscale-uart ARM: dts: pxa*: Fix serial port names ARM: dts: pxa*: Don't redeclare phandle references serial: omap: drop unused dt-bindings header serial: 8250: 8250_omap: Add DMA support for UARTs on K3 SoCs serial: 8250: 8250_omap: Work around errata causing spurious IRQs with DMA serial: 8250: 8250_omap: Extend driver data to pass FIFO trigger info serial: 8250: 8250_omap: Move locking out from __dma_rx_do_complete() serial: 8250: 8250_omap: Account for data in flight during DMA teardown ... |
||
|
Linus Torvalds
|
5b67fbfc32 |
Kbuild updates for v5.7
[Build system]
- add CONFIG_UNUSED_KSYMS_WHITELIST, which will be useful to define
a fixed set of export symbols for Generic Kernel Image (GKI)
- allow to run 'make dt_binding_check' without .config
- use full schema for checking DT examples in *.yaml files
- make modpost fail for missing MODULE_IMPORT_NS(), which makes more
sense because we know the produced modules are never loadable
- Remove unused 'AS' variable
[Kconfig]
- sanitize DEFCONFIG_LIST, and remove ARCH_DEFCONFIG from Kconfig files
- relax the 'imply' behavior so that symbols implied by y can become m
- make 'imply' obey 'depends on' in order to make 'imply' really weak
[Misc]
- add documentation on building the kernel with Clang/LLVM
- revive __HAVE_ARCH_STRLEN for 32bit sparc to use optimized strlen()
- fix warning from deb-pkg builds when CONFIG_DEBUG_INFO=n
- various script and Makefile cleanups
-----BEGIN PGP SIGNATURE-----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=wT8A
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
"Build system:
- add CONFIG_UNUSED_KSYMS_WHITELIST, which will be useful to define a
fixed set of export symbols for Generic Kernel Image (GKI)
- allow to run 'make dt_binding_check' without .config
- use full schema for checking DT examples in *.yaml files
- make modpost fail for missing MODULE_IMPORT_NS(), which makes more
sense because we know the produced modules are never loadable
- Remove unused 'AS' variable
Kconfig:
- sanitize DEFCONFIG_LIST, and remove ARCH_DEFCONFIG from Kconfig
files
- relax the 'imply' behavior so that symbols implied by 'y' can
become 'm'
- make 'imply' obey 'depends on' in order to make 'imply' really weak
Misc:
- add documentation on building the kernel with Clang/LLVM
- revive __HAVE_ARCH_STRLEN for 32bit sparc to use optimized strlen()
- fix warning from deb-pkg builds when CONFIG_DEBUG_INFO=n
- various script and Makefile cleanups"
* tag 'kbuild-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
Makefile: Update kselftest help information
kbuild: deb-pkg: fix warning when CONFIG_DEBUG_INFO is unset
kbuild: add outputmakefile to no-dot-config-targets
kbuild: remove AS variable
net: wan: wanxl: refactor the firmware rebuild rule
net: wan: wanxl: use $(M68KCC) instead of $(M68KAS) for rebuilding firmware
net: wan: wanxl: use allow to pass CROSS_COMPILE_M68k for rebuilding firmware
kbuild: add comment about grouped target
kbuild: add -Wall to KBUILD_HOSTCXXFLAGS
kconfig: remove unused variable in qconf.cc
sparc: revive __HAVE_ARCH_STRLEN for 32bit sparc
kbuild: refactor Makefile.dtbinst more
kbuild: compute the dtbs_install destination more simply
Makefile: disallow data races on gcc-10 as well
kconfig: make 'imply' obey the direct dependency
kconfig: allow symbols implied by y to become m
net: drop_monitor: use IS_REACHABLE() to guard net_dm_hw_report()
modpost: return error if module is missing ns imports and MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=n
modpost: rework and consolidate logging interface
kbuild: allow to run dt_binding_check without kernel configuration
...
|
||
|
Linus Torvalds
|
15c981d16d |
for-5.7-tag
-----BEGIN PGP SIGNATURE-----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=1m9l
-----END PGP SIGNATURE-----
Merge tag 'for-5.7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"A number of core changes that make things work better in general, code
is simpler and cleaner.
Core changes:
- per-inode file extent tree, for in memory tracking of contiguous
extent ranges to make sure i_size adjustments are accurate
- tree root structures are protected by reference counts, replacing
SRCU that did not cover some cases
- leak detector for tree root structures
- per-transaction pinned extent tracking
- buffer heads are replaced by bios for super block access
- speedup of extent back reference resolution, on an example test
scenario the runtime of send went down from a hour to minutes
- factor out locking scheme used for subvolume writer and NOCOW
exclusion, abstracted as DREW lock, double reader-writer exclusion
(allow either readers or writers)
- cleanup and abstract extent allocation policies, preparation for
zoned device support
- make reflink/clone_range work on inline extents
- add more cancellation point for relocation, improves long response
from 'balance cancel'
- add page migration callback for data pages
- switch to guid for uuids, with additional cleanups of the interface
- make ranged full fsyncs more efficient
- removal of obsolete ioctl flag BTRFS_SUBVOL_CREATE_ASYNC
- remove b-tree readahead from delayed refs paths, avoiding seek and
read unnecessary blocks
Features:
- v2 of ioctl to delete subvolumes, allowing to delete by id and more
future extensions
Fixes:
- fix qgroup rescan worker that could block umount
- fix crash during unmount due to race with delayed inode workers
- fix dellaloc flushing logic that could create unnecessary chunks
under heavy load
- fix missing file extent item for hole after ranged fsync
- several fixes in relocation error handling
Other:
- more documentation of relocation, device replace, space
reservations
- many random cleanups"
* tag 'for-5.7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (210 commits)
btrfs: fix missing semaphore unlock in btrfs_sync_file
btrfs: use nofs allocations for running delayed items
btrfs: sysfs: Use scnprintf() instead of snprintf()
btrfs: do not resolve backrefs for roots that are being deleted
btrfs: track reloc roots based on their commit root bytenr
btrfs: restart relocate_tree_blocks properly
btrfs: reloc: reorder reservation before root selection
btrfs: do not readahead in build_backref_tree
btrfs: do not use readahead for running delayed refs
btrfs: Remove async_transid from btrfs_mksubvol/create_subvol/create_snapshot
btrfs: Remove transid argument from btrfs_ioctl_snap_create_transid
btrfs: Remove BTRFS_SUBVOL_CREATE_ASYNC support
btrfs: kill the subvol_srcu
btrfs: make btrfs_cleanup_fs_roots use the radix tree lock
btrfs: don't take an extra root ref at allocation time
btrfs: hold a ref on the root on the dead roots list
btrfs: make inodes hold a ref on their roots
btrfs: move the root freeing stuff into btrfs_put_root
btrfs: move ino_cache_inode dropping out of btrfs_free_fs_root
btrfs: make the extent buffer leak check per fs info
...
|
||
|
Linus Torvalds
|
dbb381b619 |
timekeeping and timer updates:
Core:
- Consolidation of the vDSO build infrastructure to address the
difficulties of cross-builds for ARM64 compat vDSO libraries by
restricting the exposure of header content to the vDSO build.
This is achieved by splitting out header content into separate
headers. which contain only the minimaly required information which is
necessary to build the vDSO. These new headers are included from the
kernel headers and the vDSO specific files.
- Enhancements to the generic vDSO library allowing more fine grained
control over the compiled in code, further reducing architecture
specific storage and preparing for adopting the generic library by PPC.
- Cleanup and consolidation of the exit related code in posix CPU timers.
- Small cleanups and enhancements here and there
Drivers:
- The obligatory new drivers: Ingenic JZ47xx and X1000 TCU support
- Correct the clock rate of PIT64b global clock
- setup_irq() cleanup
- Preparation for PWM and suspend support for the TI DM timer
- Expand the fttmr010 driver to support ast2600 systems
- The usual small fixes, enhancements and cleanups all over the place
-----BEGIN PGP SIGNATURE-----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=5o9G
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timekeeping and timer updates from Thomas Gleixner:
"Core:
- Consolidation of the vDSO build infrastructure to address the
difficulties of cross-builds for ARM64 compat vDSO libraries by
restricting the exposure of header content to the vDSO build.
This is achieved by splitting out header content into separate
headers. which contain only the minimaly required information which
is necessary to build the vDSO. These new headers are included from
the kernel headers and the vDSO specific files.
- Enhancements to the generic vDSO library allowing more fine grained
control over the compiled in code, further reducing architecture
specific storage and preparing for adopting the generic library by
PPC.
- Cleanup and consolidation of the exit related code in posix CPU
timers.
- Small cleanups and enhancements here and there
Drivers:
- The obligatory new drivers: Ingenic JZ47xx and X1000 TCU support
- Correct the clock rate of PIT64b global clock
- setup_irq() cleanup
- Preparation for PWM and suspend support for the TI DM timer
- Expand the fttmr010 driver to support ast2600 systems
- The usual small fixes, enhancements and cleanups all over the
place"
* tag 'timers-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (80 commits)
Revert "clocksource/drivers/timer-probe: Avoid creating dead devices"
vdso: Fix clocksource.h macro detection
um: Fix header inclusion
arm64: vdso32: Enable Clang Compilation
lib/vdso: Enable common headers
arm: vdso: Enable arm to use common headers
x86/vdso: Enable x86 to use common headers
mips: vdso: Enable mips to use common headers
arm64: vdso32: Include common headers in the vdso library
arm64: vdso: Include common headers in the vdso library
arm64: Introduce asm/vdso/processor.h
arm64: vdso32: Code clean up
linux/elfnote.h: Replace elf.h with UAPI equivalent
scripts: Fix the inclusion order in modpost
common: Introduce processor.h
linux/ktime.h: Extract common header for vDSO
linux/jiffies.h: Extract common header for vDSO
linux/time64.h: Extract common header for vDSO
linux/time32.h: Extract common header for vDSO
linux/time.h: Extract common header for vDSO
...
|
||
|
Linus Torvalds
|
642e53ead6 |
Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle are:
- Various NUMA scheduling updates: harmonize the load-balancer and
NUMA placement logic to not work against each other. The intended
result is better locality, better utilization and fewer migrations.
- Introduce Thermal Pressure tracking and optimizations, to improve
task placement on thermally overloaded systems.
- Implement frequency invariant scheduler accounting on (some) x86
CPUs. This is done by observing and sampling the 'recent' CPU
frequency average at ~tick boundaries. The CPU provides this data
via the APERF/MPERF MSRs. This hopefully makes our capacity
estimates more precise and keeps tasks on the same CPU better even
if it might seem overloaded at a lower momentary frequency. (As
usual, turbo mode is a complication that we resolve by observing
the maximum frequency and renormalizing to it.)
- Add asymmetric CPU capacity wakeup scan to improve capacity
utilization on asymmetric topologies. (big.LITTLE systems)
- PSI fixes and optimizations.
- RT scheduling capacity awareness fixes & improvements.
- Optimize the CONFIG_RT_GROUP_SCHED constraints code.
- Misc fixes, cleanups and optimizations - see the changelog for
details"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (62 commits)
threads: Update PID limit comment according to futex UAPI change
sched/fair: Fix condition of avg_load calculation
sched/rt: cpupri_find: Trigger a full search as fallback
kthread: Do not preempt current task if it is going to call schedule()
sched/fair: Improve spreading of utilization
sched: Avoid scale real weight down to zero
psi: Move PF_MEMSTALL out of task->flags
MAINTAINERS: Add maintenance information for psi
psi: Optimize switching tasks inside shared cgroups
psi: Fix cpu.pressure for cpu.max and competing cgroups
sched/core: Distribute tasks within affinity masks
sched/fair: Fix enqueue_task_fair warning
thermal/cpu-cooling, sched/core: Move the arch_set_thermal_pressure() API to generic scheduler code
sched/rt: Remove unnecessary push for unfit tasks
sched/rt: Allow pulling unfitting task
sched/rt: Optimize cpupri_find() on non-heterogenous systems
sched/rt: Re-instate old behavior in select_task_rq_rt()
sched/rt: cpupri_find: Implement fallback mechanism for !fit case
sched/fair: Fix reordering of enqueue/dequeue_task_fair()
sched/fair: Fix runnable_avg for throttled cfs
...
|
||
|
Linus Torvalds
|
9b82f05f86 |
Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"The main changes in this cycle were:
Kernel side changes:
- A couple of x86/cpu cleanups and changes were grandfathered in due
to patch dependencies. These clean up the set of CPU model/family
matching macros with a consistent namespace and C99 initializer
style.
- A bunch of updates to various low level PMU drivers:
* AMD Family 19h L3 uncore PMU
* Intel Tiger Lake uncore support
* misc fixes to LBR TOS sampling
- optprobe fixes
- perf/cgroup: optimize cgroup event sched-in processing
- misc cleanups and fixes
Tooling side changes are to:
- perf {annotate,expr,record,report,stat,test}
- perl scripting
- libapi, libperf and libtraceevent
- vendor events on Intel and S390, ARM cs-etm
- Intel PT updates
- Documentation changes and updates to core facilities
- misc cleanups, fixes and other enhancements"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (89 commits)
cpufreq/intel_pstate: Fix wrong macro conversion
x86/cpu: Cleanup the now unused CPU match macros
hwrng: via_rng: Convert to new X86 CPU match macros
crypto: Convert to new CPU match macros
ASoC: Intel: Convert to new X86 CPU match macros
powercap/intel_rapl: Convert to new X86 CPU match macros
PCI: intel-mid: Convert to new X86 CPU match macros
mmc: sdhci-acpi: Convert to new X86 CPU match macros
intel_idle: Convert to new X86 CPU match macros
extcon: axp288: Convert to new X86 CPU match macros
thermal: Convert to new X86 CPU match macros
hwmon: Convert to new X86 CPU match macros
platform/x86: Convert to new CPU match macros
EDAC: Convert to new X86 CPU match macros
cpufreq: Convert to new X86 CPU match macros
ACPI: Convert to new X86 CPU match macros
x86/platform: Convert to new CPU match macros
x86/kernel: Convert to new CPU match macros
x86/kvm: Convert to new CPU match macros
x86/perf/events: Convert to new CPU match macros
...
|
||
|
Linus Torvalds
|
4b9fd8a829 |
Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"The main changes in this cycle were:
- Continued user-access cleanups in the futex code.
- percpu-rwsem rewrite that uses its own waitqueue and atomic_t
instead of an embedded rwsem. This addresses a couple of
weaknesses, but the primary motivation was complications on the -rt
kernel.
- Introduce raw lock nesting detection on lockdep
(CONFIG_PROVE_RAW_LOCK_NESTING=y), document the raw_lock vs. normal
lock differences. This too originates from -rt.
- Reuse lockdep zapped chain_hlocks entries, to conserve RAM
footprint on distro-ish kernels running into the "BUG:
MAX_LOCKDEP_CHAIN_HLOCKS too low!" depletion of the lockdep
chain-entries pool.
- Misc cleanups, smaller fixes and enhancements - see the changelog
for details"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits)
fs/buffer: Make BH_Uptodate_Lock bit_spin_lock a regular spinlock_t
thermal/x86_pkg_temp: Make pkg_temp_lock a raw_spinlock_t
Documentation/locking/locktypes: Minor copy editor fixes
Documentation/locking/locktypes: Further clarifications and wordsmithing
m68knommu: Remove mm.h include from uaccess_no.h
x86: get rid of user_atomic_cmpxchg_inatomic()
generic arch_futex_atomic_op_inuser() doesn't need access_ok()
x86: don't reload after cmpxchg in unsafe_atomic_op2() loop
x86: convert arch_futex_atomic_op_inuser() to user_access_begin/user_access_end()
objtool: whitelist __sanitizer_cov_trace_switch()
[parisc, s390, sparc64] no need for access_ok() in futex handling
sh: no need of access_ok() in arch_futex_atomic_op_inuser()
futex: arch_futex_atomic_op_inuser() calling conventions change
completion: Use lockdep_assert_RT_in_threaded_ctx() in complete_all()
lockdep: Add posixtimer context tracing bits
lockdep: Annotate irq_work
lockdep: Add hrtimer context tracing bits
lockdep: Introduce wait-type checks
completion: Use simple wait queues
sched/swait: Prepare usage in completions
...
|
||
|
Linus Torvalds
|
59838093be |
Driver core patches for 5.7-rc1
Here is the "big" set of driver core changes for 5.7-rc1.
Nothing huge in here, just lots of little firmware core changes and use
of new apis, a libfs fix, a debugfs api change, and some driver core
deferred probe rework.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXoHLIg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yle2ACgjJJzRJl9Ckae3ms+9CS4OSFFZPsAoKSrXmFc
Z7goYQdZo1zz8c0RYDrJ
=Y91m
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the "big" set of driver core changes for 5.7-rc1.
Nothing huge in here, just lots of little firmware core changes and
use of new apis, a libfs fix, a debugfs api change, and some driver
core deferred probe rework.
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (44 commits)
Revert "driver core: Set fw_devlink to "permissive" behavior by default"
driver core: Set fw_devlink to "permissive" behavior by default
driver core: Replace open-coded list_last_entry()
driver core: Read atomic counter once in driver_probe_done()
libfs: fix infoleak in simple_attr_read()
driver core: Add device links from fwnode only for the primary device
platform/x86: touchscreen_dmi: Add info for the Chuwi Vi8 Plus tablet
platform/x86: touchscreen_dmi: Add EFI embedded firmware info support
Input: icn8505 - Switch to firmware_request_platform for retreiving the fw
Input: silead - Switch to firmware_request_platform for retreiving the fw
selftests: firmware: Add firmware_request_platform tests
test_firmware: add support for firmware_request_platform
firmware: Add new platform fallback mechanism and firmware_request_platform()
Revert "drivers: base: power: wakeup.c: Use built-in RCU list checking"
drivers: base: power: wakeup.c: Use built-in RCU list checking
component: allow missing unbind callback
debugfs: remove return value of debugfs_create_file_size()
debugfs: Check module state before warning in {full/open}_proxy_open()
firmware: fix a double abort case with fw_load_sysfs_fallback
arch_topology: Fix putting invalid cpu clk
...
|
||
Alan Maguire
|
c3bba690a2 |
kunit: subtests should be indented 4 spaces according to TAP
Introduce KUNIT_SUBTEST_INDENT macro which corresponds to 4-space indentation and KUNIT_SUBSUBTEST_INDENT macro which corresponds to 8-space indentation in line with TAP spec (e.g. see "Subtests" section of https://node-tap.org/tap-protocol/). Use these macros in place of one or two tabs in strings to clarify why we are indenting. Suggested-by: Frank Rowand <frowand.list@gmail.com> Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Reviewed-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Alan Maguire
|
eda8e324f7 |
kunit: add log test
the logging test ensures multiple strings logged appear in the log string associated with the test when CONFIG_KUNIT_DEBUGFS is enabled. Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |
||
|
Alan Maguire
|
e2219db280 |
kunit: add debugfs /sys/kernel/debug/kunit/<suite>/results display
add debugfs support for displaying kunit test suite results; this is especially useful for module-loaded tests to allow disentangling of test result display from other dmesg events. debugfs support is provided if CONFIG_KUNIT_DEBUGFS=y. As well as printk()ing messages, we append them to a per-test log. Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> |