to test and use this feature in the NTB transport layer. Also, bug
fixes for the AMD and Switchtec drivers, as well as some general
patches.
-----BEGIN PGP SIGNATURE-----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=P1lR
-----END PGP SIGNATURE-----
Merge tag 'ntb-5.3' of git://github.com/jonmason/ntb
Pull NTB updates from Jon Mason:
"New feature to add support for NTB virtual MSI interrupts, the ability
to test and use this feature in the NTB transport layer.
Also, bug fixes for the AMD and Switchtec drivers, as well as some
general patches"
* tag 'ntb-5.3' of git://github.com/jonmason/ntb: (22 commits)
NTB: Describe the ntb_msi_test client in the documentation.
NTB: Add MSI interrupt support to ntb_transport
NTB: Add ntb_msi_test support to ntb_test
NTB: Introduce NTB MSI Test Client
NTB: Introduce MSI library
NTB: Rename ntb.c to support multiple source files in the module
NTB: Introduce functions to calculate multi-port resource index
NTB: Introduce helper functions to calculate logical port number
PCI/switchtec: Add module parameter to request more interrupts
PCI/MSI: Support allocating virtual MSI interrupts
ntb_hw_switchtec: Fix setup MW with failure bug
ntb_hw_switchtec: Skip unnecessary re-setup of shared memory window for crosslink case
ntb_hw_switchtec: Remove redundant steps of switchtec_ntb_reinit_peer() function
NTB: correct ntb_dev_ops and ntb_dev comment typos
NTB: amd: Silence shift wrapping warning in amd_ntb_db_vector_mask()
ntb_hw_switchtec: potential shift wrapping bug in switchtec_ntb_init_sndev()
NTB: ntb_transport: Ensure qp->tx_mw_dma_addr is initaliazed
NTB: ntb_hw_amd: set peer limit register
NTB: ntb_perf: Clear stale values in doorbell and command SPAD register
NTB: ntb_perf: Disable NTB link after clearing peer XLAT registers
...
Introduce the module parameter 'use_msi' which, when set, uses
MSI interrupts instead of doorbells for each queue pair (QP). The
parameter is only available if NTB MSI support is configured into
the kernel. We also require there to be more than one memory window
(MW) so that an extra one is available to forward the APIC region.
To use MSIs, we request one interrupt per QP and forward the MSI address
and data to the peer using scratch pad registers (SPADS) above the MW
SPADS. (If there are not enough SPADS the MSI interrupt will not be used.)
Once registered, we simply use ntb_msi_peer_trigger and the receiving
ISR simply queues up the rxc_db_work for the queue.
This addition can significantly improve performance of ntb_transport.
In a simple, untuned, apples-to-apples comparision using ntb_netdev
and iperf with switchtec hardware, I see 3.88Gb/s without MSI
interrupts and 14.1Gb/s wit MSI, which is a more than 3x improvement.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Allen Hubbe <allenbh@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Introduce a tool to test NTB MSI interrupts similar to the other
NTB test tools. This tool creates a debugfs directory for each
NTB device with the following files:
port
irqX_occurrences
peerX/port
peerX/count
peerX/trigger
The 'port' file tells the user the local port number and the
'occurrences' files tell the number of local interrupts that
have been received for each interrupt.
For each peer, the 'port' file and the 'count' file tell you the
peer's port number and number of interrupts respectively. Writing
the interrupt number to the 'trigger' file triggers the interrupt
handler for the peer which should increment their corresponding
'occurrences' file. The 'ready' file indicates if a peer is ready,
writing to this file blocks until it is ready.
The module parameter num_irqs can be used to set the number of
local interrupts. By default this is 4. This is only limited by
the number of unused MSI interrupts registered by the hardware
(this will require support of the hardware driver) and there must
be at least 2*num_irqs + 1 spads registers available.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Allen Hubbe <allenbh@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
The NTB MSI library allows passing MSI interrupts across a memory
window. This offers similar functionality to doorbells or messages
except will often have much better latency and the client can
potentially use significantly more remote interrupts than typical hardware
provides for doorbells. (Which can be important in high-multiport
setups.)
The library utilizes one memory window per peer and uses the highest
index memory windows. Before any ntb_msi function may be used, the user
must call ntb_msi_init(). It may then setup and tear down the memory
windows when the link state changes using ntb_msi_setup_mws() and
ntb_msi_clear_mws().
The peer which receives the interrupt must call ntb_msim_request_irq()
to assign the interrupt handler (this function is functionally
similar to devm_request_irq()) and the returned descriptor must be
transferred to the peer which can use it to trigger the interrupt.
The triggering peer, once having received the descriptor, can
trigger the interrupt by calling ntb_msi_peer_trigger().
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Allen Hubbe <allenbh@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
The kbuild system does not support having multiple source files in
a module if one of those source files has the same name as the module.
Therefore, we must rename ntb.c to core.c, while the module remains
ntb.ko.
This is similar to the way the nvme modules are structured.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Allen Hubbe <allenbh@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Switchtec does not support setting multiple MWs simultaneously. The
driver takes a hardware lock to ensure that two peers are not doing this
simultaneously and it fails if someone else takes the lock. In most
cases, this is fine as clients only setup the MWs once on one side of
the link.
However, there's a race condition when a re-initialization is caused by
a link event. The driver will re-setup the shared memory window
asynchronously and this races with the client setting up it's memory
windows on the link up event.
To fix this we ensure do the entire initialization in a work queue and
signal the client once it's done.
Signed-off-by: Joey Zhang <joey.zhang@microchip.com>
Signed-off-by: Wesley Sheng <wesley.sheng@microchip.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
In case of NTB crosslink topology, the setting of shared memory window in
the virtual partition doesn't reset on peer's reboot. So skip the
unnecessary re-setup of shared memory window for that case.
Signed-off-by: Wesley Sheng <wesley.sheng@microchip.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
When a re-initialization is caused by a link event, the driver will
re-setup the shared memory window. But at that time, the shared memory
is still valid, and it's unnecessary to free, reallocate and then
initialize it again. We only need to reconfigure the hardware
registers. Remove the redundant steps from
switchtec_ntb_reinit_peer() function.
Signed-off-by: Joey Zhang <joey.zhang@microchip.com>
Signed-off-by: Wesley Sheng <wesley.sheng@microchip.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
This code triggers a Smatch warning:
drivers/ntb/hw/amd/ntb_hw_amd.c:336 amd_ntb_db_vector_mask()
warn: should '(1 << db_vector)' be a 64 bit type?
I don't think "db_vector" can be higher than 16 so this doesn't affect
runtime, but it's nice to silence the static checker warning and we
might increase "ndev->db_count" in the future.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
This code triggers a Smatch warning:
drivers/ntb/hw/mscc/ntb_hw_switchtec.c:884 switchtec_ntb_init_sndev()
warn: should '(1 << sndev->peer_partition)' be a 64 bit type?
The "part_map" and "tpart_vec" variables are u64 type so this seems like
a valid warning.
Fixes: 3df54c870f ("ntb_hw_switchtec: Allow using Switchtec NTB in multi-partition setups")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Dan Carpenter's static checker reported:
drivers/ntb/ntb_transport.c:1926 ntb_transport_create_queue()
error: we previously assumed 'qp->tx_dma_chan' could be null (see line 1872)
This is because the tx_mw_dma_addr is uninitialized in this function and
may be incorrectly released using a NULL DMA channel.
In practice this bug will not likely be seen. I'd guess you could hit
this if you loaded ntb_netdev with use_dma=True, then unloaded it and
loaded it again after setting the module parameter to use_dma=False.
To fix this, we simply ensure that tx_mw_dma_addr is always
initialized to zero. This is the safest in case any other part of the
code operates on it if it is non-zero.
Fixes: c59666bb32 ("NTB: ntb_transport: Ensure the destination buffer is mapped for TX DMA")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
As per amd ntb spec it says that peer limit register
must be programmed
Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com>
Acked-by: Allen Hubbe <allenbh@gmail.com>
Acked-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
when ntb_perf is unloaded, the command scratchpad register still
retains the last initialized value of PERF_CMD_INVAL. When ntb_perf
is re-loaded and reads peer command scratchpad register and it mis
interprets the peer state as initialized.
To avoid this, clearing the local side command scratchpad register
in perf_disable_service
Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com>
Acked-by: Allen Hubbe <allenbh@gmail.com>
Acked-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
If ntb link disabled before clearing peer's XLAT register, the clearing
won't have any effect since the link is already down. So modified the
sequence so that the link is down only towards the end of the function
after clearing the XLAT register
Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com>
Acked-by: Allen Hubbe <allenbh@gmail.com>
Acked-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
while waiting for the peer ntb_perf to initialize scratchpad
registers, local side ntb_perf might have already exhausted the
maximum number of retries which is currently set to 500. To avoid
this and to give little more time to the peer ntb_perf for scratchpad
initialization, increased the number of retries to 1000
Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com>
Acked-by: Allen Hubbe <allenbh@gmail.com>
Acked-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Fix sparse warning:
drivers/ntb/hw/intel/ntb_hw_gen3.c:535:5: warning:
symbol 'intel_ntb3_peer_db_addr' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms and conditions of the gnu general public license
version 2 as published by the free software foundation this program
is distributed in the hope it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 263 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mmiowb() is now implied by spin_unlock() on architectures that require
it, so there is no reason to call it from driver code. This patch was
generated using coccinelle:
@mmiowb@
@@
- mmiowb();
and invoked as:
$ for d in drivers include/linux/qed sound; do \
spatch --include-headers --sp-file mmiowb.cocci --dir $d --in-place; done
NOTE: mmiowb() has only ever guaranteed ordering in conjunction with
spin_unlock(). However, pairing each mmiowb() removal in this patch with
the corresponding call to spin_unlock() is not at all trivial, so there
is a small chance that this change may regress any drivers incorrectly
relying on mmiowb() to order MMIO writes between CPUs using lock-free
synchronisation. If you've ended up bisecting to this commit, you can
reintroduce the mmiowb() calls using wmb() instead, which should restore
the old behaviour on all architectures other than some esoteric ia64
systems.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
transport improvements, and a reworking of the peer_db_addr to all for
better abstraction
-----BEGIN PGP SIGNATURE-----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=7EC8
-----END PGP SIGNATURE-----
Merge tag 'ntb-5.1' of git://github.com/jonmason/ntb
Pull NTB updates from Jon Mason:
- fixes for switchtec debugability and mapping table entries
- NTB transport improvements
- a reworking of the peer_db_addr for better abstraction
* tag 'ntb-5.1' of git://github.com/jonmason/ntb:
NTB: add new parameter to peer_db_addr() db_bit and db_data
NTB: ntb_transport: Ensure the destination buffer is mapped for TX DMA
NTB: ntb_transport: Free MWs in ntb_transport_link_cleanup()
ntb_hw_switchtec: Added support of >=4G memory windows
ntb_hw_switchtec: NT req id mapping table register entry number should be 512
ntb_hw_switchtec: debug print 64bit aligned crosslink BAR Numbers
NTB door bell usage depends on NTB hardware.
ex: intel NTB gen1 has one peer door bell register which can be controlled
by the bitmap writen to it, while Intel NTB gen3 has a registers
per door bell and the data trigering the each door bell is always 1.
therefore exposing only peer door bell address forcing the user
to be aware of such low level details
Signed-off-by: Leonid Ravich <Leonid.Ravich@emc.com>
Acked-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Allen Hubbe <allenbh@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Presently, when ntb_transport is used with DMA and the IOMMU turned on,
it fails with errors from the IOMMU such as:
DMAR: DRHD: handling fault status reg 202
DMAR: [DMA Write] Request device [00:04.0] fault addr
381fc0340000 [fault reason 05] PTE Write access is not set
This is because ntb_transport does not map the BAR space with the IOMMU.
To fix this, we map the entire MW region for each QP after we assign
the DMA channel. This prevents needing an extra DMA map in the fast
path.
Link: https://lore.kernel.org/linux-pci/499934e7-3734-1aee-37dd-b42a5d2a2608@intel.com/
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
If NTB peer host crashes or reboots, the NTB transport link will be
down and the MWs of NTB transport will be invalid. But the
ntb_transport_link_cleanup() does not free these invalid MWs. When
the NTB peer host is recovered later, NTB transport link will be
up and the ntb_set_mw() will not reset up MWs. Because the MWs of
NTB transport are invalid, the NTB transport will not work.
We can fix it by freeing MWs when NTB transport link is down, then
the ntb_set_mw() will reset up MWs when NTB transport link is up.
Signed-off-by: Joey Zhang <joey.zhang@microchip.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Current Switchtec's BAR setup registers are limited to 32bits,
corresponding to the maximum MW (memory window) size is <4G.
Increase the MW sizes with the addition of the BAR Setup Extension
Register for the upper 32bits of a 64bits MW size. This increases the MW
range to between 4K and 2^63.
Reported-by: Boris Glimcher <boris.glimcher@emc.com>
Signed-off-by: Paul Selles <paul.selles@microchip.com>
Signed-off-by: Wesley Sheng <wesley.sheng@microchip.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Switchtec NTB crosslink BARs are 64bit addressed but they are printed as
32bit addressed BARs. Fix debug log to increment the BAR numbers by 2 to
reflect the 64bit address alignment.
Fixes: 0175250182 ("ntb_hw_switchtec: Add initialization code for crosslink")
Signed-off-by: Paul Selles <paul.selles@microchip.com>
Signed-off-by: Wesley Sheng <wesley.sheng@microchip.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Clean up the ifdefs which conditionally defined the io{read|write}64
functions in favour of the new common io-64-nonatomic-lo-hi header.
Per a nit from Andy Shevchenko, the include list is also made
alphabetical.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that ioread64 and iowrite64 are available in io-64-nonatomic,
we can remove the hack at the top of ntb_hw_intel.c and replace it
with an include.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Acked-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We already need to zero out memory for dma_alloc_coherent(), as such
using dma_zalloc_coherent() is superflous. Phase it out.
This change was generated with the following Coccinelle SmPL patch:
@ replace_dma_zalloc_coherent @
expression dev, size, data, handle, flags;
@@
-dma_zalloc_coherent(dev, size, handle, flags)
+dma_alloc_coherent(dev, size, handle, flags)
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
[hch: re-ran the script on the latest tree]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Since IDT PCIe-switch temperature sensor is now always available
irregardless of the EEPROM/BIOS settings, Kconfig and in-code
description should be properly altered. In addition lets update
the driver copyright lines.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
IDT PCIe-switch temperature sensor interface is very broken. First
of all only a few combinations of TMPCTL threshold enable bits
really cause the interrupts unmasked. Even if an individual bit
indicates the event unmasked, corresponding IRQ just isn't generated.
Most of the threshold enable bits combinations are in fact useless and
non of them can help to create a fully functional alarm interface.
So to speak, we can't create a well defined hwmon alarms based on
the IDT PCI-switch threshold IRQs.
Secondly a single threshold IRQ (not a combination of thresholds) can
be successfully enabled without the issue described above. But in this
case we experienced an enormous number of interrupts generated by
the chip if the temperature got near the enabled threshold value. Filter
adjustment didn't help much. It also doesn't provide a hysteresis settings.
Due to the temperature sample fluctuations near the threshold the
interrupts spate makes the system nearly unusable until the temperature
value finally settled so being pushed either to be fully higher or lower
the threshold.
All of these issues makes the temperature sensor alarm interface useless
and even at some point dangerous to be used in the driver. In this case
it is safer to completely discard it and disable the temperature alarm
interrupts.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
IDT PCIe switches provide an embedded temperature sensor working
within [0; 127.5]C with resolution of 0.5C. They also can generate
a PCIe upstream interrupt in case if the temperature passes through
specified thresholds. Since this thresholds interface is very broken
the created hwmon-sysfs interface exposes only the next set of hwmon
nodes: current input temperature, lowest and highest values measured,
history resetting, value offset. HWmon alarm interface isn't provided.
IDT PCIe switch also've got an ADC/filter settings of the sensor.
This driver doesn't expose them to the hwmon-sysfs interface at the
moment, except the offset node.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
In order to create a hwmon interface for the IDT PCIe-switch temperature
sensor the already available reader method should be improved. Particularly
we need to redesign it so one would be able to read temperature/offset
values from registers of the passed types. Since IDT sensor interface
provides temperature in unsigned format 0:7:1 (7 bits for real value
and one for fraction) we also need to have helpers for the typical sysfs
temperature data type conversion to and from this format. Even though
the IDT PCIe-switch provided temperature offset got the same but signed
type it can be translated by these methods too.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Be a little wasteful if the (likely CMA) message window buffer is not
suitably aligned after our first attempt; allocate a buffer twice as big
as we need and manually align our MW buffer within it.
This was needed on Intel Broadwell DE platforms with intel_iommu=off
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 1373888 ("Missing break in switch")
Addresses-Coverity-ID: 1373889 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Allen Hubbe <allenbh@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
IDT NTB driver sets the upper limit of actual translation address
being written to the corresponding memory window setup. It is achieved
by BARLIMITx register initialization. Needless to say, that the register
works within PCIe bus address space.
In general CPU and PCIe address spaces are different. It means,
that addresses used for Memory TLPs routine can be different from
CPU addresses. While in most of cases they are the same, there are
exceptions when the proper mapping must be performed to have the
portable driver code. There used to be a virt_to_bus()/bus_to_virt()
interface for this purpose. But it's deprecated now. It was also a
mistake to use pci_resource_start() since the return address of the
method is at the CPU address space. In order to achieve the desired
purpose we need to use pci_bus_address() helper. This method shall
return a PCIe bus base address of the corresponding BAR resource.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Allen Hubbe <allenbh@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Both devm_kcalloc() and devm_kzalloc() return NULL on error. They
never return error pointers.
The use of IS_ERR_OR_NULL is currently applied to the wrong
context.
Fix this by replacing IS_ERR_OR_NULL with regular NULL checks.
Fixes: bf2a952d31 ("NTB: Add IDT 89HPESxNTx PCIe-switches support")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
ndev_vec_mask() should be returning u64 mask value instead of int.
Otherwise the mask value returned can be incorrect for larger
vectors.
Fixes: e26a5843f7 ("NTB: Split ntb_hw_intel and ntb_transport drivers")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Tested-by: Lucas Van <lucas.van@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Move the Microsemi Switchtec PCI Vendor ID (same as
PCI_VENDOR_ID_PMC_Sierra) to pci_ids.h. Also, replace Microsemi class
constants with the standard PCI definitions.
Signed-off-by: Doug Meyer <dmeyer@gigaio.com>
[bhelgaas: restore SPDX (I assume it was removed by mistake), remove
device ID definitions]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
- Additional struct_size() conversions (Matthew, Kees)
- Explicitly reported overflow fixes (Silvio, Kees)
- Add missing kvcalloc() function (Kees)
- Treewide conversions of allocators to use either 2-factor argument
variant when available, or array_size() and array3_size() as needed (Kees)
-----BEGIN PGP SIGNATURE-----
Comment: Kees Cook <kees@outflux.net>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=zUUp
-----END PGP SIGNATURE-----
Merge tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull more overflow updates from Kees Cook:
"The rest of the overflow changes for v4.18-rc1.
This includes the explicit overflow fixes from Silvio, further
struct_size() conversions from Matthew, and a bug fix from Dan.
But the bulk of it is the treewide conversions to use either the
2-factor argument allocators (e.g. kmalloc(a * b, ...) into
kmalloc_array(a, b, ...) or the array_size() macros (e.g. vmalloc(a *
b) into vmalloc(array_size(a, b)).
Coccinelle was fighting me on several fronts, so I've done a bunch of
manual whitespace updates in the patches as well.
Summary:
- Error path bug fix for overflow tests (Dan)
- Additional struct_size() conversions (Matthew, Kees)
- Explicitly reported overflow fixes (Silvio, Kees)
- Add missing kvcalloc() function (Kees)
- Treewide conversions of allocators to use either 2-factor argument
variant when available, or array_size() and array3_size() as needed
(Kees)"
* tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits)
treewide: Use array_size in f2fs_kvzalloc()
treewide: Use array_size() in f2fs_kzalloc()
treewide: Use array_size() in f2fs_kmalloc()
treewide: Use array_size() in sock_kmalloc()
treewide: Use array_size() in kvzalloc_node()
treewide: Use array_size() in vzalloc_node()
treewide: Use array_size() in vzalloc()
treewide: Use array_size() in vmalloc()
treewide: devm_kzalloc() -> devm_kcalloc()
treewide: devm_kmalloc() -> devm_kmalloc_array()
treewide: kvzalloc() -> kvcalloc()
treewide: kvmalloc() -> kvmalloc_array()
treewide: kzalloc_node() -> kcalloc_node()
treewide: kzalloc() -> kcalloc()
treewide: kmalloc() -> kmalloc_array()
mm: Introduce kvcalloc()
video: uvesafb: Fix integer overflow in allocation
UBIFS: Fix potential integer overflow in allocation
leds: Use struct_size() in allocation
Convert intel uncore to struct_size
...
ntb_transport_create_queue() is never called in atomic context.
ntb_transport_create_queue() is only called by ntb_netdev_probe(),
which is set as ".probe" in struct ntb_transport_client.
Despite never getting called from atomic context,
ntb_transport_create_queue() calls kzalloc_node() with GFP_ATOMIC,
which does not sleep for allocation.
GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL,
which can sleep and improve the possibility of sucessful allocation.
This is found by a static analysis tool named DCNS written by myself.
And I also manually check it
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
ntb_transport_setup_qp_mw() is never called in atomic context.
ntb_transport_setup_qp_mw() is only called by ntb_transport_link_work(),
which is set as a parameter of INIT_DELAYED_WORK()
in ntb_transport_probe().
Despite never getting called from atomic context,
ntb_transport_setup_qp_mw() calls kzalloc_node() with GFP_ATOMIC,
which does not sleep for allocation.
GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL,
which can sleep and improve the possibility of sucessful allocation.
This is found by a static analysis tool named DCNS written by myself.
And I also manually check it.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Move the Intel hw gen3 code to its own source file. The ntb_hw_intel.c was
getting too large and makes it hard to maintain with future hardware
changes.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Break out the generation specific definitions to different headers
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Sparse is whining about the u32 and __le32 mixed usage in the driver
drivers/ntb/test/ntb_perf.c:288:21: warning: cast to restricted __le32
drivers/ntb/test/ntb_perf.c:295:37: warning: incorrect type in argument 4 (different base types)
drivers/ntb/test/ntb_perf.c:295:37: expected unsigned int [unsigned] [usertype] val
drivers/ntb/test/ntb_perf.c:295:37: got restricted __le32 [usertype] <noident>
...
NTB hardware drivers shall accept CPU-endian data and translate it to
the portable formate by internal means, so the explicit conversions
are not necessary before Scratchpad/Messages API usage anymore.
Fixes: b83003b3fdc1 ("NTB: ntb_perf: Add full multi-port NTB API support")
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
We accidentally return success if dmaengine_submit() fails. The fix is
to preserve the error code from dma_submit_error().
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Fixes the following sparse warnings:
drivers/ntb/hw/mscc/ntb_hw_switchtec.c:1552:6: warning:
symbol 'switchtec_ntb_remove' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
