2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-17 01:34:00 +08:00
Commit Graph

4702 Commits

Author SHA1 Message Date
Linus Torvalds
7ce14f6ff2 Merge branch 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
 "I fixed up a regression from 4.0 where conversion between different
  raid levels would sometimes bail out without converting.

  Filipe tracked down a race where it was possible to double allocate
  chunks on the drive.

  Mark has a fix for fiemap.  All three will get bundled off for stable
  as well"

* 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: fix regression in raid level conversion
  Btrfs: fix racy system chunk allocation when setting block group ro
  btrfs: clear 'ret' in btrfs_check_shared() loop
2015-05-23 11:14:10 -07:00
Chris Mason
153c35b6cc Btrfs: fix regression in raid level conversion
Commit 2f0810880f changed
btrfs_set_block_group_ro to avoid trying to allocate new chunks with the
new raid profile during conversion.  This fixed failures when there was
no space on the drive to allocate a new chunk, but the metadata
reserves were sufficient to continue the conversion.

But this ended up causing a regression when the drive had plenty of
space to allocate new chunks, mostly because reduce_alloc_profile isn't
using the new raid profile.

Fixing btrfs_reduce_alloc_profile is a bigger patch.  For now, do a
partial revert of 2f0810880, and don't error out if we hit ENOSPC.

Signed-off-by: Chris Mason <clm@fb.com>
Tested-by: Dave Sterba <dsterba@suse.cz>
Reported-by: Holger Hoffstaette <holger.hoffstaette@googlemail.com>
2015-05-20 11:03:38 -07:00
Filipe Manana
a96295965b Btrfs: fix racy system chunk allocation when setting block group ro
If while setting a block group read-only we end up allocating a system
chunk, through check_system_chunk(), we were not doing it while holding
the chunk mutex which is a problem if a concurrent chunk allocation is
happening, through do_chunk_alloc(), as it means both block groups can
end up using the same logical addresses and physical regions in the
device(s). So make sure we hold the chunk mutex.

Cc: stable@vger.kernel.org  # 4.0+
Fixes: 2f0810880f ("btrfs: delete chunk allocation attemp when
                      setting block group ro")

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-05-19 18:04:17 -07:00
Mark Fasheh
2c2ed5aa01 btrfs: clear 'ret' in btrfs_check_shared() loop
btrfs_check_shared() is leaking a return value of '1' from
find_parent_nodes(). As a result, callers (in this case, extent_fiemap())
are told extents are shared when they are not. This in turn broke fiemap on
btrfs for kernels v3.18 and up.

The fix is simple - we just have to clear 'ret' after we are done processing
the results of find_parent_nodes().

It wasn't clear to me at first what was happening with return values in
btrfs_check_shared() and find_parent_nodes() - thanks to Josef for the help
on irc. I added documentation to both functions to make things more clear
for the next hacker who might come across them.

If we could queue this up for -stable too that would be great.

Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-05-19 18:04:17 -07:00
Linus Torvalds
c7309e88a6 Merge branch 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
 "The first commit is a fix from Filipe for a very old extent buffer
  reuse race that triggered a BUG_ON.  It hasn't come up often, I looked
  through old logs at FB and we hit it a handful of times over the last
  year.

  The rest are other corners he hit during testing"

* 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: fix race when reusing stale extent buffers that leads to BUG_ON
  Btrfs: fix race between block group creation and their cache writeout
  Btrfs: fix panic when starting bg cache writeout after IO error
  Btrfs: fix crash after inode cache writeback failure
2015-05-16 15:50:58 -07:00
Filipe Manana
062c19e9dd Btrfs: fix race when reusing stale extent buffers that leads to BUG_ON
There's a race between releasing extent buffers that are flagged as stale
and recycling them that makes us it the following BUG_ON at
btrfs_release_extent_buffer_page:

    BUG_ON(extent_buffer_under_io(eb))

The BUG_ON is triggered because the extent buffer has the flag
EXTENT_BUFFER_DIRTY set as a consequence of having been reused and made
dirty by another concurrent task.

Here follows a sequence of steps that leads to the BUG_ON.

      CPU 0                                                    CPU 1                                                CPU 2

path->nodes[0] == eb X
X->refs == 2 (1 for the tree, 1 for the path)
btrfs_header_generation(X) == current trans id
flag EXTENT_BUFFER_DIRTY set on X

btrfs_release_path(path)
    unlocks X

                                                      reads eb X
                                                         X->refs incremented to 3
                                                      locks eb X
                                                      btrfs_del_items(X)
                                                         X becomes empty
                                                         clean_tree_block(X)
                                                             clear EXTENT_BUFFER_DIRTY from X
                                                         btrfs_del_leaf(X)
                                                             unlocks X
                                                             extent_buffer_get(X)
                                                                X->refs incremented to 4
                                                             btrfs_free_tree_block(X)
                                                                X's range is not pinned
                                                                X's range added to free
                                                                  space cache
                                                             free_extent_buffer_stale(X)
                                                                lock X->refs_lock
                                                                set EXTENT_BUFFER_STALE on X
                                                                release_extent_buffer(X)
                                                                    X->refs decremented to 3
                                                                    unlocks X->refs_lock
                                                      btrfs_release_path()
                                                         unlocks X
                                                         free_extent_buffer(X)
                                                             X->refs becomes 2

                                                                                                      __btrfs_cow_block(Y)
                                                                                                          btrfs_alloc_tree_block()
                                                                                                              btrfs_reserve_extent()
                                                                                                                  find_free_extent()
                                                                                                                      gets offset == X->start
                                                                                                              btrfs_init_new_buffer(X->start)
                                                                                                                  btrfs_find_create_tree_block(X->start)
                                                                                                                      alloc_extent_buffer(X->start)
                                                                                                                          find_extent_buffer(X->start)
                                                                                                                              finds eb X in radix tree

    free_extent_buffer(X)
        lock X->refs_lock
            test X->refs == 2
            test bit EXTENT_BUFFER_STALE is set
            test !extent_buffer_under_io(eb)

                                                                                                                              increments X->refs to 3
                                                                                                                              mark_extent_buffer_accessed(X)
                                                                                                                                  check_buffer_tree_ref(X)
                                                                                                                                    --> does nothing,
                                                                                                                                        X->refs >= 2 and
                                                                                                                                        EXTENT_BUFFER_TREE_REF
                                                                                                                                        is set in X
                                                                                                              clear EXTENT_BUFFER_STALE from X
                                                                                                              locks X
                                                                                                          btrfs_mark_buffer_dirty()
                                                                                                              set_extent_buffer_dirty(X)
                                                                                                                  check_buffer_tree_ref(X)
                                                                                                                     --> does nothing, X->refs >= 2 and
                                                                                                                         EXTENT_BUFFER_TREE_REF is set
                                                                                                                  sets EXTENT_BUFFER_DIRTY on X

            test and clear EXTENT_BUFFER_TREE_REF
            decrements X->refs to 2
        release_extent_buffer(X)
            decrements X->refs to 1
            unlock X->refs_lock

                                                                                                      unlock X
                                                                                                      free_extent_buffer(X)
                                                                                                          lock X->refs_lock
                                                                                                          release_extent_buffer(X)
                                                                                                              decrements X->refs to 0
                                                                                                              btrfs_release_extent_buffer_page(X)
                                                                                                                   BUG_ON(extent_buffer_under_io(X))
                                                                                                                       --> EXTENT_BUFFER_DIRTY set on X

Fix this by making find_extent buffer wait for any ongoing task currently
executing free_extent_buffer()/free_extent_buffer_stale() if the extent
buffer has the stale flag set.
A more clean alternative would be to always increment the extent buffer's
reference count while holding its refs_lock spinlock but find_extent_buffer
is a performance critical area and that would cause lock contention whenever
multiple tasks search for the same extent buffer concurrently.

A build server running a SLES 12 kernel (3.12 kernel + over 450 upstream
btrfs patches backported from newer kernels) was hitting this often:

[1212302.461948] kernel BUG at ../fs/btrfs/extent_io.c:4507!
(...)
[1212302.470219] CPU: 1 PID: 19259 Comm: bs_sched Not tainted 3.12.36-38-default #1
[1212302.540792] Hardware name: Supermicro PDSM4/PDSM4, BIOS 6.00 04/17/2006
[1212302.540792] task: ffff8800e07e0100 ti: ffff8800d6412000 task.ti: ffff8800d6412000
[1212302.540792] RIP: 0010:[<ffffffffa0507081>]  [<ffffffffa0507081>] btrfs_release_extent_buffer_page.constprop.51+0x101/0x110 [btrfs]
(...)
[1212302.630008] Call Trace:
[1212302.630008]  [<ffffffffa05070cd>] release_extent_buffer+0x3d/0xa0 [btrfs]
[1212302.630008]  [<ffffffffa04c2d9d>] btrfs_release_path+0x1d/0xa0 [btrfs]
[1212302.630008]  [<ffffffffa04c5c7e>] read_block_for_search.isra.33+0x13e/0x3a0 [btrfs]
[1212302.630008]  [<ffffffffa04c8094>] btrfs_search_slot+0x3f4/0xa80 [btrfs]
[1212302.630008]  [<ffffffffa04cf5d8>] lookup_inline_extent_backref+0xf8/0x630 [btrfs]
[1212302.630008]  [<ffffffffa04d13dd>] __btrfs_free_extent+0x11d/0xc40 [btrfs]
[1212302.630008]  [<ffffffffa04d64a4>] __btrfs_run_delayed_refs+0x394/0x11d0 [btrfs]
[1212302.630008]  [<ffffffffa04db379>] btrfs_run_delayed_refs.part.66+0x69/0x280 [btrfs]
[1212302.630008]  [<ffffffffa04ed2ad>] __btrfs_end_transaction+0x2ad/0x3d0 [btrfs]
[1212302.630008]  [<ffffffffa04f7505>] btrfs_evict_inode+0x4a5/0x500 [btrfs]
[1212302.630008]  [<ffffffff811b9e28>] evict+0xa8/0x190
[1212302.630008]  [<ffffffff811b0330>] do_unlinkat+0x1a0/0x2b0

I was also able to reproduce this on a 3.19 kernel, corresponding to Chris'
integration branch from about a month ago, running the following stress
test on a qemu/kvm guest (with 4 virtual cpus and 16Gb of ram):

  while true; do
     mkfs.btrfs -l 4096 -f -b `expr 20 \* 1024 \* 1024 \* 1024` /dev/sdd
     mount /dev/sdd /mnt
     snapshot_cmd="btrfs subvolume snapshot -r /mnt"
     snapshot_cmd="$snapshot_cmd /mnt/snap_\`date +'%H_%M_%S_%N'\`"
     fsstress -d /mnt -n 25000 -p 8 -x "$snapshot_cmd" -X 100
     umount /mnt
  done

Which usually triggers the BUG_ON within less than 24 hours:

[49558.618097] ------------[ cut here ]------------
[49558.619732] kernel BUG at fs/btrfs/extent_io.c:4551!
(...)
[49558.620031] CPU: 3 PID: 23908 Comm: fsstress Tainted: G        W      3.19.0-btrfs-next-7+ #3
[49558.620031] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
[49558.620031] task: ffff8800319fc0d0 ti: ffff880220da8000 task.ti: ffff880220da8000
[49558.620031] RIP: 0010:[<ffffffffa0476b1a>]  [<ffffffffa0476b1a>] btrfs_release_extent_buffer_page+0x20/0xe9 [btrfs]
(...)
[49558.620031] Call Trace:
[49558.620031]  [<ffffffffa0476c73>] release_extent_buffer+0x90/0xd3 [btrfs]
[49558.620031]  [<ffffffff8142b10c>] ? _raw_spin_lock+0x3b/0x43
[49558.620031]  [<ffffffffa0477052>] ? free_extent_buffer+0x37/0x94 [btrfs]
[49558.620031]  [<ffffffffa04770ab>] free_extent_buffer+0x90/0x94 [btrfs]
[49558.620031]  [<ffffffffa04396d5>] btrfs_release_path+0x4a/0x69 [btrfs]
[49558.620031]  [<ffffffffa0444907>] __btrfs_free_extent+0x778/0x80c [btrfs]
[49558.620031]  [<ffffffffa044a485>] __btrfs_run_delayed_refs+0xad2/0xc62 [btrfs]
[49558.728054]  [<ffffffff811420d5>] ? kmemleak_alloc_recursive.constprop.52+0x16/0x18
[49558.728054]  [<ffffffffa044c1e8>] btrfs_run_delayed_refs+0x6d/0x1ba [btrfs]
[49558.728054]  [<ffffffffa045917f>] ? join_transaction.isra.9+0xb9/0x36b [btrfs]
[49558.728054]  [<ffffffffa045a75c>] btrfs_commit_transaction+0x4c/0x981 [btrfs]
[49558.728054]  [<ffffffffa0434f86>] btrfs_sync_fs+0xd5/0x10d [btrfs]
[49558.728054]  [<ffffffff81155923>] ? iterate_supers+0x60/0xc4
[49558.728054]  [<ffffffff8117966a>] ? do_sync_work+0x91/0x91
[49558.728054]  [<ffffffff8117968a>] sync_fs_one_sb+0x20/0x22
[49558.728054]  [<ffffffff81155939>] iterate_supers+0x76/0xc4
[49558.728054]  [<ffffffff811798e8>] sys_sync+0x55/0x83
[49558.728054]  [<ffffffff8142bbd2>] system_call_fastpath+0x12/0x17

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
2015-05-11 07:59:11 -07:00
Filipe Manana
ff1f8250a9 Btrfs: fix race between block group creation and their cache writeout
So creating a block group has 2 distinct phases:

Phase 1 - creates the btrfs_block_group_cache item and adds it to the
rbtree fs_info->block_group_cache_tree and to the corresponding list
space_info->block_groups[];

Phase 2 - adds the block group item to the extent tree and corresponding
items to the chunk tree.

The first phase adds the block_group_cache_item to a list of pending block
groups in the transaction handle, and phase 2 happens when
btrfs_end_transaction() is called against the transaction handle.

It happens that once phase 1 completes, other concurrent tasks that use
their own transaction handle, but points to the same running transaction
(struct btrfs_trans_handle->transaction), can use this block group for
space allocations and therefore mark it dirty. Dirty block groups are
tracked in a list belonging to the currently running transaction (struct
btrfs_transaction) and not in the transaction handle (btrfs_trans_handle).

This is a problem because once a task calls btrfs_commit_transaction(),
it calls btrfs_start_dirty_block_groups() which will see all dirty block
groups and attempt to start their writeout, including those that are
still attached to the transaction handle of some concurrent task that
hasn't called btrfs_end_transaction() yet - which means those block
groups haven't gone through phase 2 yet and therefore when
write_one_cache_group() is called, it won't find the block group items
in the extent tree and abort the current transaction with -ENOENT,
turning the fs into readonly mode and require a remount.

Fix this by ignoring -ENOENT when looking for block group items in the
extent tree when we attempt to start the writeout of the block group
caches outside the critical section of the transaction commit. We will
try again later during the critical section and if there we still don't
find the block group item in the extent tree, we then abort the current
transaction.

This issue happened twice, once while running fstests btrfs/067 and once
for btrfs/078, which produced the following trace:

[ 3278.703014] WARNING: CPU: 7 PID: 18499 at fs/btrfs/super.c:260 __btrfs_abort_transaction+0x52/0x114 [btrfs]()
[ 3278.707329] BTRFS: Transaction aborted (error -2)
(...)
[ 3278.731555] Call Trace:
[ 3278.732396]  [<ffffffff8142fa46>] dump_stack+0x4f/0x7b
[ 3278.733860]  [<ffffffff8108b6a2>] ? console_unlock+0x361/0x3ad
[ 3278.735312]  [<ffffffff81045ea5>] warn_slowpath_common+0xa1/0xbb
[ 3278.736874]  [<ffffffffa03ada6d>] ? __btrfs_abort_transaction+0x52/0x114 [btrfs]
[ 3278.738302]  [<ffffffff81045f05>] warn_slowpath_fmt+0x46/0x48
[ 3278.739520]  [<ffffffffa03ada6d>] __btrfs_abort_transaction+0x52/0x114 [btrfs]
[ 3278.741222]  [<ffffffffa03b9e56>] write_one_cache_group+0xae/0xbf [btrfs]
[ 3278.742797]  [<ffffffffa03c487b>] btrfs_start_dirty_block_groups+0x170/0x2b2 [btrfs]
[ 3278.744492]  [<ffffffffa03d309c>] btrfs_commit_transaction+0x130/0x9c9 [btrfs]
[ 3278.746084]  [<ffffffff8107d33d>] ? trace_hardirqs_on+0xd/0xf
[ 3278.747249]  [<ffffffffa03e5660>] btrfs_sync_file+0x313/0x387 [btrfs]
[ 3278.748744]  [<ffffffff8117acad>] vfs_fsync_range+0x95/0xa4
[ 3278.749958]  [<ffffffff81435b54>] ? ret_from_sys_call+0x1d/0x58
[ 3278.751218]  [<ffffffff8117acd8>] vfs_fsync+0x1c/0x1e
[ 3278.754197]  [<ffffffff8117ae54>] do_fsync+0x34/0x4e
[ 3278.755192]  [<ffffffff8117b07c>] SyS_fsync+0x10/0x14
[ 3278.756236]  [<ffffffff81435b32>] system_call_fastpath+0x12/0x17
[ 3278.757366] ---[ end trace 9a4d4df4969709aa ]---

Fixes: 1bbc621ef2 ("Btrfs: allow block group cache writeout
                      outside critical section in commit")

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-05-11 07:59:10 -07:00
Filipe Manana
28aeeac1dd Btrfs: fix panic when starting bg cache writeout after IO error
When waiting for the writeback of block group cache we returned
immediately if there was an error during writeback without waiting
for the ordered extent to complete. This left a short time window
where if some other task attempts to start the writeout for the same
block group cache it can attempt to add a new ordered extent, starting
at the same offset (0) before the previous one is removed from the
ordered tree, causing an ordered tree panic (calls BUG()).

This normally doesn't happen in other write paths, such as buffered
writes or direct IO writes for regular files, since before marking
page ranges dirty we lock the ranges and wait for any ordered extents
within the range to complete first.

Fix this by making btrfs_wait_ordered_range() not return immediately
if it gets an error from the writeback, waiting for all ordered extents
to complete first.

This issue happened often when running the fstest btrfs/088 and it's
easy to trigger it by running in a loop until the panic happens:

  for ((i = 1; i <= 10000; i++)) do ./check btrfs/088 ; done

[17156.862573] BTRFS critical (device sdc): panic in ordered_data_tree_panic:70: Inconsistency in ordered tree at offset 0 (errno=-17 Object already exists)
[17156.864052] ------------[ cut here ]------------
[17156.864052] kernel BUG at fs/btrfs/ordered-data.c:70!
(...)
[17156.864052] Call Trace:
[17156.864052]  [<ffffffffa03876e3>] btrfs_add_ordered_extent+0x12/0x14 [btrfs]
[17156.864052]  [<ffffffffa03787e2>] run_delalloc_nocow+0x5bf/0x747 [btrfs]
[17156.864052]  [<ffffffffa03789ff>] run_delalloc_range+0x95/0x353 [btrfs]
[17156.864052]  [<ffffffffa038b7fe>] writepage_delalloc.isra.16+0xb9/0x13f [btrfs]
[17156.864052]  [<ffffffffa038d75b>] __extent_writepage+0x129/0x1f7 [btrfs]
[17156.864052]  [<ffffffffa038da5a>] extent_write_cache_pages.isra.15.constprop.28+0x231/0x2f4 [btrfs]
[17156.864052]  [<ffffffff810ad2af>] ? __module_text_address+0x12/0x59
[17156.864052]  [<ffffffff8107d33d>] ? trace_hardirqs_on+0xd/0xf
[17156.864052]  [<ffffffffa038df76>] extent_writepages+0x4b/0x5c [btrfs]
[17156.864052]  [<ffffffff81144431>] ? kmem_cache_free+0x9b/0xce
[17156.864052]  [<ffffffffa0376a46>] ? btrfs_submit_direct+0x3fc/0x3fc [btrfs]
[17156.864052]  [<ffffffffa0389cd6>] ? free_extent_state+0x8c/0xc1 [btrfs]
[17156.864052]  [<ffffffffa0374871>] btrfs_writepages+0x28/0x2a [btrfs]
[17156.864052]  [<ffffffff8110c4c8>] do_writepages+0x23/0x2c
[17156.864052]  [<ffffffff81102f36>] __filemap_fdatawrite_range+0x5a/0x61
[17156.864052]  [<ffffffff81102f6e>] filemap_fdatawrite_range+0x13/0x15
[17156.864052]  [<ffffffffa0383ef7>] btrfs_fdatawrite_range+0x21/0x48 [btrfs]
[17156.864052]  [<ffffffffa03ab89e>] __btrfs_write_out_cache.isra.14+0x2d9/0x3a7 [btrfs]
[17156.864052]  [<ffffffffa03ac1ab>] ? btrfs_write_out_cache+0x41/0xdc [btrfs]
[17156.864052]  [<ffffffffa03ac1fd>] btrfs_write_out_cache+0x93/0xdc [btrfs]
[17156.864052]  [<ffffffffa0363847>] ? btrfs_start_dirty_block_groups+0x13a/0x2b2 [btrfs]
[17156.864052]  [<ffffffffa03638e6>] btrfs_start_dirty_block_groups+0x1d9/0x2b2 [btrfs]
[17156.864052]  [<ffffffff8107d33d>] ? trace_hardirqs_on+0xd/0xf
[17156.864052]  [<ffffffffa037209e>] btrfs_commit_transaction+0x130/0x9c9 [btrfs]
[17156.864052]  [<ffffffffa034c748>] btrfs_sync_fs+0xe1/0x12d [btrfs]

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-05-11 07:59:10 -07:00
Filipe Manana
e43699d4b4 Btrfs: fix crash after inode cache writeback failure
If the writeback of an inode cache failed we were unnecessarilly
attempting to release again the delalloc metadata that we previously
reserved. However attempting to do this a second time triggers an
assertion at drop_outstanding_extent() because we have no more
outstanding extents for our inode cache's inode. If we were able
to start writeback of the cache the reserved metadata space is
released at btrfs_finished_ordered_io(), even if an error happens
during writeback.

So make sure we don't repeat the metadata space release if writeback
started for our inode cache.

This issue was trivial to reproduce by running the fstest btrfs/088
with "-o inode_cache", which triggered the assertion leading to a
BUG() call and requiring a reboot in order to run the remaining
fstests. Trace produced by btrfs/088:

[255289.385904] BTRFS: assertion failed: BTRFS_I(inode)->outstanding_extents >= num_extents, file: fs/btrfs/extent-tree.c, line: 5276
[255289.388094] ------------[ cut here ]------------
[255289.389184] kernel BUG at fs/btrfs/ctree.h:4057!
[255289.390125] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
(...)
[255289.392068] Call Trace:
[255289.392068]  [<ffffffffa035e774>] drop_outstanding_extent+0x3d/0x6d [btrfs]
[255289.392068]  [<ffffffffa0364988>] btrfs_delalloc_release_metadata+0x54/0xe3 [btrfs]
[255289.392068]  [<ffffffffa03b4174>] btrfs_write_out_ino_cache+0x95/0xad [btrfs]
[255289.392068]  [<ffffffffa036f5c4>] btrfs_save_ino_cache+0x275/0x2dc [btrfs]
[255289.392068]  [<ffffffffa03e2d83>] commit_fs_roots.isra.12+0xaa/0x137 [btrfs]
[255289.392068]  [<ffffffff8107d33d>] ? trace_hardirqs_on+0xd/0xf
[255289.392068]  [<ffffffffa037841f>] ? btrfs_commit_transaction+0x4b1/0x9c9 [btrfs]
[255289.392068]  [<ffffffff814351a4>] ? _raw_spin_unlock+0x32/0x46
[255289.392068]  [<ffffffffa037842e>] btrfs_commit_transaction+0x4c0/0x9c9 [btrfs]
(...)

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-05-11 07:59:10 -07:00
Linus Torvalds
af6472881a Merge branch 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fix from Chris Mason:
 "When an arm user reported crashes near page_address(page) in my new
  code, it became clear that I can't be trusted with GFP masks.  Filipe
  beat me to the patch, and I'll just be in the corner with my dunce cap
  on"

* 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: fix wrong mapping flags for free space inode
2015-05-08 20:59:02 -07:00
Filipe Manana
1d3c61c2eb Btrfs: fix wrong mapping flags for free space inode
We were passing a flags value that differed from the intention in commit
2b10826800 ("Btrfs: don't use highmem for free space cache pages").

This caused problems in a ARM machine, leaving btrfs unusable there.

Reported-by: Merlijn Wajer <merlijn@wizzup.org>
Tested-by: Merlijn Wajer <merlijn@wizzup.org>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-05-06 17:06:13 -07:00
Linus Torvalds
64887b6882 Merge branch 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
 "A few more btrfs fixes.

  These range from corners Filipe found in the new free space cache
  writeback to a grab bag of fixes from the list"

* 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: btrfs_release_extent_buffer_page didn't free pages of dummy extent
  Btrfs: fill ->last_trans for delayed inode in btrfs_fill_inode.
  btrfs: unlock i_mutex after attempting to delete subvolume during send
  btrfs: check io_ctl_prepare_pages return in __btrfs_write_out_cache
  btrfs: fix race on ENOMEM in alloc_extent_buffer
  btrfs: handle ENOMEM in btrfs_alloc_tree_block
  Btrfs: fix find_free_dev_extent() malfunction in case device tree has hole
  Btrfs: don't check for delalloc_bytes in cache_save_setup
  Btrfs: fix deadlock when starting writeback of bg caches
  Btrfs: fix race between start dirty bg cache writeout and bg deletion
2015-05-01 07:46:21 -07:00
Forrest Liu
5d2361db48 Btrfs: btrfs_release_extent_buffer_page didn't free pages of dummy extent
btrfs_release_extent_buffer_page() can't handle dummy extent that
allocated by btrfs_clone_extent_buffer() properly. That is because
reference count of pages that allocated by btrfs_clone_extent_buffer()
was 2, 1 by alloc_page(), and another by attach_extent_buffer_page().

Running following command repeatly can check this memory leak problem

    btrfs inspect-internal inode-resolve 256 /mnt/btrfs

Signed-off-by: Chien-Kuan Yeh <ckya@synology.com>
Signed-off-by: Forrest Liu <forrestl@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Tested-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-04-29 13:22:09 -07:00
Linus Torvalds
f583381f50 Merge branch 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
 "Filipe hit two problems in my block group cache patches.  We finalized
  the fixes last week and ran through more tests"

* 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: prevent list corruption during free space cache processing
  Btrfs: fix inode cache writeout
2015-04-26 17:40:30 -07:00
Linus Torvalds
9ec3a646fe Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull fourth vfs update from Al Viro:
 "d_inode() annotations from David Howells (sat in for-next since before
  the beginning of merge window) + four assorted fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  RCU pathwalk breakage when running into a symlink overmounting something
  fix I_DIO_WAKEUP definition
  direct-io: only inc/dec inode->i_dio_count for file systems
  fs/9p: fix readdir()
  VFS: assorted d_backing_inode() annotations
  VFS: fs/inode.c helpers: d_inode() annotations
  VFS: fs/cachefiles: d_backing_inode() annotations
  VFS: fs library helpers: d_inode() annotations
  VFS: assorted weird filesystems: d_inode() annotations
  VFS: normal filesystems (and lustre): d_inode() annotations
  VFS: security/: d_inode() annotations
  VFS: security/: d_backing_inode() annotations
  VFS: net/: d_inode() annotations
  VFS: net/unix: d_backing_inode() annotations
  VFS: kernel/: d_inode() annotations
  VFS: audit: d_backing_inode() annotations
  VFS: Fix up some ->d_inode accesses in the chelsio driver
  VFS: Cachefiles should perform fs modifications on the top layer only
  VFS: AF_UNIX sockets should call mknod on the top layer only
2015-04-26 17:22:07 -07:00
Yang Dongsheng
6e17d30bfa Btrfs: fill ->last_trans for delayed inode in btrfs_fill_inode.
We need to fill inode when we found a node for it in delayed_nodes_tree.
But we did not fill the ->last_trans currently, it will cause the test
of xfstest/generic/311 fail. Scenario of the 311 is shown as below:

Problem:
	(1). test_fd = open(fname, O_RDWR|O_DIRECT)
	(2). pwrite(test_fd, buf, 4096, 0)
	(3). close(test_fd)
	(4). drop_all_caches()	<-------- "echo 3 > /proc/sys/vm/drop_caches"
	(5). test_fd = open(fname, O_RDWR|O_DIRECT)
	(6). fsync(test_fd);
				<-------- we did not get the correct log entry for the file
Reason:
	When we re-open this file in (5), we would find a node
in delayed_nodes_tree and fill the inode we are lookup with the
information. But the ->last_trans is not filled, then the fsync()
will check the ->last_trans and found it's 0 then say this inode
is already in our tree which is commited, not recording the extents
for it.

Fix:
	This patch fill the ->last_trans properly and set the
runtime_flags if needed in this situation. Then we can get the
log entries we expected after (6) and generic/311 passed.

Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Reviewed-by: Miao Xie <miaoxie@huawei.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-04-26 06:27:03 -07:00
Omar Sandoval
909e26dce3 btrfs: unlock i_mutex after attempting to delete subvolume during send
Whenever the check for a send in progress introduced in commit
521e0546c9 (btrfs: protect snapshots from deleting during send) is
hit, we return without unlocking inode->i_mutex. This is easy to see
with lockdep enabled:

[  +0.000059] ================================================
[  +0.000028] [ BUG: lock held when returning to user space! ]
[  +0.000029] 4.0.0-rc5-00096-g3c435c1 #93 Not tainted
[  +0.000026] ------------------------------------------------
[  +0.000029] btrfs/211 is leaving the kernel with locks still held!
[  +0.000029] 1 lock held by btrfs/211:
[  +0.000023]  #0:  (&type->i_mutex_dir_key){+.+.+.}, at: [<ffffffff8135b8df>] btrfs_ioctl_snap_destroy+0x2df/0x7a0

Make sure we unlock it in the error path.

Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Cc: stable@vger.kernel.org
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-04-26 06:27:02 -07:00
Omar Sandoval
b86054540e btrfs: check io_ctl_prepare_pages return in __btrfs_write_out_cache
If io_ctl_prepare_pages fails, the pages in io_ctl.pages are not valid.
When we try to access them later, things will blow up in various ways.

Also fix the comment about the return value, which is an errno on error,
not -1, and update the cases where it was not.

Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-04-26 06:27:01 -07:00
Omar Sandoval
5ca64f45e9 btrfs: fix race on ENOMEM in alloc_extent_buffer
Consider the following interleaving of overlapping calls to
alloc_extent_buffer:

Call 1:

- Successfully allocates a few pages with find_or_create_page
- find_or_create_page fails, goto free_eb
- Unlocks the allocated pages

Call 2:
- Calls find_or_create_page and gets a page in call 1's extent_buffer
- Finds that the page is already associated with an extent_buffer
- Grabs a reference to the half-written extent_buffer and calls
  mark_extent_buffer_accessed on it

mark_extent_buffer_accessed will then try to call mark_page_accessed on
a null page and panic.

The fix is to decrement the reference count on the half-written
extent_buffer before unlocking the pages so call 2 won't use it. We
should also set exists = NULL in the case that we don't use exists to
avoid accidentally returning a freed extent_buffer in an error case.

Signed-off-by: Omar Sandoval <osandov@osandov.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-04-26 06:27:00 -07:00
Omar Sandoval
67b7859e9b btrfs: handle ENOMEM in btrfs_alloc_tree_block
This is one of the first places to give out when memory is tight. Handle
it properly rather than with a BUG_ON.

Also fix the comment about the return value, which is an ERR_PTR, not
NULL, on error.

Signed-off-by: Omar Sandoval <osandov@osandov.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
2015-04-26 06:27:00 -07:00
Forrest Liu
1b98450816 Btrfs: fix find_free_dev_extent() malfunction in case device tree has hole
If device tree has hole, find_free_dev_extent() cannot find available
address properly.

The problem can be reproduce by following script.

    mntpath=/btrfs
    loopdev=/dev/loop0
    filepath=/home/forrest/image

    umount $mntpath
    losetup -d $loopdev
    truncate --size 100g $filepath
    losetup $loopdev $filepath
    mkfs.btrfs -f $loopdev
    mount $loopdev $mntpath

    # make device tree with one big hole
    for i in `seq 1 1 100`; do
        fallocate -l 1g $mntpath/$i
    done
    sync
    for i in `seq 1 1 95`; do
        rm $mntpath/$i
    done
    sync

    # wait cleaner thread remove unused block group
    sleep 300

    fallocate -l 1g $mntpath/aaa

    # failed to allocate new chunk
    fallocate -l 1g $mntpath/bbb

Above script will make device tree with one big hole, and can only allocate
just one chunk in a transaction, so failed to allocate new chunk for $mntpath/bbb

    item 8 key (1 DEV_EXTENT 2185232384) itemoff 15859 itemsize 48
        dev extent chunk_tree 3
        chunk objectid 256 chunk offset 106292051968 length 1073741824
    item 9 key (1 DEV_EXTENT 104190705664) itemoff 15811 itemsize 48
        dev extent chunk_tree 3
        chunk objectid 256 chunk offset 103108575232 length 1073741824

Signed-off-by: Forrest Liu <forrestl@synology.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-04-26 06:26:59 -07:00
Chris Mason
e4c88f007b Btrfs: don't check for delalloc_bytes in cache_save_setup
Now that we're doing free space cache writeback outside the critical
section in the commit, there is a bigger window for delalloc_bytes to
be added after a cache has been written.  find_free_extent may do this
without putting the block group back into the dirty list, and also
without a transaction running.

Checking for delalloc_bytes in cache_save_setup means we might leave the
cache marked as written without invalidating it.  Consistency checks
during mount will toss the cache, but it's better to get rid of the
check in cache_save_setup and let it get invalidated by the checks
already done during cache write out.

Signed-off-by: Chris Mason <clm@fb.com>
2015-04-26 06:26:58 -07:00
Filipe Manana
24b89d08ef Btrfs: fix deadlock when starting writeback of bg caches
While starting the writes of the dirty block group caches, if we don't
find a block group item in the extent tree we were leaving without
releasing our path, running delayed references and then looping again to
process any new dirty block groups. However this second iteration of the
loop could cause a deadlock because it tries to lock some other extent
tree node/leaf which another task already locked and it's blocked because
it's waiting for a lock on some node/leaf that is in our path that was not
released before.
We could also deadlock when running the delayed references - as we could
end up trying to lock the same nodes/leafs that we have in our local path
(with a different lock type).

Got into such case when running xfstests:

[20892.242791] ------------[ cut here ]------------
[20892.243776] WARNING: CPU: 0 PID: 13299 at fs/btrfs/super.c:260 __btrfs_abort_transaction+0x52/0x114 [btrfs]()
[20892.245874] BTRFS: Transaction aborted (error -2)
(...)
[20892.269378] Call Trace:
[20892.269915]  [<ffffffff8142fa46>] dump_stack+0x4f/0x7b
[20892.271097]  [<ffffffff8108b6a2>] ? console_unlock+0x361/0x3ad
[20892.272173]  [<ffffffff81045ea5>] warn_slowpath_common+0xa1/0xbb
[20892.273386]  [<ffffffffa0509a6d>] ? __btrfs_abort_transaction+0x52/0x114 [btrfs]
[20892.274857]  [<ffffffff81045f05>] warn_slowpath_fmt+0x46/0x48
[20892.275851]  [<ffffffffa0509a6d>] __btrfs_abort_transaction+0x52/0x114 [btrfs]
[20892.277341]  [<ffffffffa0515e10>] write_one_cache_group+0x68/0xaf [btrfs]
[20892.278628]  [<ffffffffa052088a>] btrfs_start_dirty_block_groups+0x18d/0x29b [btrfs]
[20892.280191]  [<ffffffffa052f077>] btrfs_commit_transaction+0x130/0x9c9 [btrfs]
(...)
[20892.291316] ---[ end trace 597f77e664245373 ]---
[20892.293955] BTRFS: error (device sdg) in write_one_cache_group:3184: errno=-2 No such entry
[20892.297390] BTRFS info (device sdg): forced readonly
[20892.298222] ------------[ cut here ]------------
[20892.299190] WARNING: CPU: 0 PID: 13299 at fs/btrfs/ctree.c:2683 btrfs_search_slot+0x7e/0x7d2 [btrfs]()
(...)
[20892.326253] Call Trace:
[20892.326904]  [<ffffffff8142fa46>] dump_stack+0x4f/0x7b
[20892.329503]  [<ffffffff8108b6a2>] ? console_unlock+0x361/0x3ad
[20892.330815]  [<ffffffff81045ea5>] warn_slowpath_common+0xa1/0xbb
[20892.332556]  [<ffffffffa0510b73>] ? btrfs_search_slot+0x7e/0x7d2 [btrfs]
[20892.333955]  [<ffffffff81045f62>] warn_slowpath_null+0x1a/0x1c
[20892.335562]  [<ffffffffa0510b73>] btrfs_search_slot+0x7e/0x7d2 [btrfs]
[20892.336849]  [<ffffffff8107b024>] ? arch_local_irq_save+0x9/0xc
[20892.338222]  [<ffffffffa051ad52>] ? cache_save_setup+0x43/0x2a5 [btrfs]
[20892.339823]  [<ffffffffa051ad66>] ? cache_save_setup+0x57/0x2a5 [btrfs]
[20892.341275]  [<ffffffff814351a4>] ? _raw_spin_unlock+0x32/0x46
[20892.342810]  [<ffffffffa0515de7>] write_one_cache_group+0x3f/0xaf [btrfs]
[20892.344184]  [<ffffffffa052088a>] btrfs_start_dirty_block_groups+0x18d/0x29b [btrfs]
[20892.347162]  [<ffffffffa052f077>] btrfs_commit_transaction+0x130/0x9c9 [btrfs]
(...)
[20892.361015] ---[ end trace 597f77e664245374 ]---
[21120.688097] INFO: task kworker/u8:17:29854 blocked for more than 120 seconds.
[21120.689881]       Tainted: G        W       4.0.0-rc5-btrfs-next-9+ #2
[21120.691384] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
(...)
[21120.703696] Call Trace:
[21120.704310]  [<ffffffff8143107e>] schedule+0x74/0x83
[21120.705490]  [<ffffffffa055f025>] btrfs_tree_lock+0xd7/0x236 [btrfs]
[21120.706757]  [<ffffffff81075cd6>] ? signal_pending_state+0x31/0x31
[21120.708156]  [<ffffffffa054ac1e>] lock_extent_buffer_for_io+0x3e/0x194 [btrfs]
[21120.709892]  [<ffffffffa054bb86>] ? btree_write_cache_pages+0x273/0x385 [btrfs]
[21120.711605]  [<ffffffffa054bc42>] btree_write_cache_pages+0x32f/0x385 [btrfs]
[21120.723440]  [<ffffffffa0527552>] btree_writepages+0x23/0x5c [btrfs]
[21120.724943]  [<ffffffff8110c4c8>] do_writepages+0x23/0x2c
[21120.726008]  [<ffffffff81176dde>] __writeback_single_inode+0x73/0x2fa
[21120.727230]  [<ffffffff8117714a>] ? writeback_sb_inodes+0xe5/0x38b
[21120.728526]  [<ffffffff811771fb>] ? writeback_sb_inodes+0x196/0x38b
[21120.729701]  [<ffffffff8117726a>] writeback_sb_inodes+0x205/0x38b
(...)
[21120.747853] INFO: task btrfs:13282 blocked for more than 120 seconds.
[21120.749459]       Tainted: G        W       4.0.0-rc5-btrfs-next-9+ #2
[21120.751137] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
(...)
[21120.768457] Call Trace:
[21120.769039]  [<ffffffff8143107e>] schedule+0x74/0x83
[21120.770107]  [<ffffffffa052f25c>] btrfs_commit_transaction+0x315/0x9c9 [btrfs]
[21120.771558]  [<ffffffff81075cd6>] ? signal_pending_state+0x31/0x31
[21120.773659]  [<ffffffffa056fd8c>] prepare_to_relocate+0xcb/0xd2 [btrfs]
[21120.776257]  [<ffffffffa05741da>] relocate_block_group+0x44/0x4a9 [btrfs]
[21120.777755]  [<ffffffffa05747a0>] ? btrfs_relocate_block_group+0x161/0x288 [btrfs]
[21120.779459]  [<ffffffffa05747a8>] btrfs_relocate_block_group+0x169/0x288 [btrfs]
[21120.781153]  [<ffffffffa0550403>] btrfs_relocate_chunk.isra.29+0x3e/0xa7 [btrfs]
[21120.783918]  [<ffffffffa05518fd>] btrfs_balance+0xaa4/0xc52 [btrfs]
[21120.785436]  [<ffffffff8114306e>] ? cpu_cache_get.isra.39+0xe/0x1f
[21120.786434]  [<ffffffffa0559252>] btrfs_ioctl_balance+0x23f/0x2b0 [btrfs]
(...)
[21120.889251] INFO: task fsstress:13288 blocked for more than 120 seconds.
[21120.890526]       Tainted: G        W       4.0.0-rc5-btrfs-next-9+ #2
[21120.891773] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
(...)
[21120.899960] Call Trace:
[21120.900743]  [<ffffffff8143107e>] schedule+0x74/0x83
[21120.903004]  [<ffffffffa055f025>] btrfs_tree_lock+0xd7/0x236 [btrfs]
[21120.904383]  [<ffffffff81075cd6>] ? signal_pending_state+0x31/0x31
[21120.905608]  [<ffffffffa051125b>] btrfs_search_slot+0x766/0x7d2 [btrfs]
[21120.906812]  [<ffffffff8114290e>] ? virt_to_head_page+0x9/0x2c
[21120.907874]  [<ffffffff81144b7f>] ? cache_alloc_debugcheck_after.isra.42+0x16c/0x1cb
[21120.909551]  [<ffffffffa05124e0>] btrfs_insert_empty_items+0x5d/0xa8 [btrfs]
[21120.910914]  [<ffffffffa0512585>] btrfs_insert_item+0x5a/0xa5 [btrfs]
[21120.912181]  [<ffffffffa0520271>] ? btrfs_create_pending_block_groups+0x96/0x130 [btrfs]
[21120.913784]  [<ffffffffa052028a>] btrfs_create_pending_block_groups+0xaf/0x130 [btrfs]
[21120.915374]  [<ffffffffa052ffc2>] __btrfs_end_transaction+0x84/0x366 [btrfs]
[21120.916735]  [<ffffffffa05302b4>] btrfs_end_transaction+0x10/0x12 [btrfs]
[21120.917996]  [<ffffffffa051ab26>] btrfs_check_data_free_space+0x11f/0x27c [btrfs]
[21120.919478]  [<ffffffffa051ba25>] btrfs_delalloc_reserve_space+0x1e/0x51 [btrfs]
[21120.921226]  [<ffffffffa05382f2>] btrfs_truncate_page+0x85/0x2c4 [btrfs]
[21120.923121]  [<ffffffffa0538572>] btrfs_cont_expand+0x41/0x3ef [btrfs]
[21120.924449]  [<ffffffffa0541091>] ? btrfs_file_write_iter+0x19a/0x431 [btrfs]
[21120.926602]  [<ffffffff8107b024>] ? arch_local_irq_save+0x9/0xc
[21120.927769]  [<ffffffffa0541091>] ? btrfs_file_write_iter+0x19a/0x431 [btrfs]
[21120.929324]  [<ffffffffa05410a0>] ? btrfs_file_write_iter+0x1a9/0x431 [btrfs]
[21120.930723]  [<ffffffffa05410d9>] btrfs_file_write_iter+0x1e2/0x431 [btrfs]
[21120.931897]  [<ffffffff81067d85>] ? get_parent_ip+0xe/0x3e
[21120.934446]  [<ffffffff811534c3>] new_sync_write+0x7c/0xa0
[21120.935528]  [<ffffffff81153b58>] vfs_write+0xb2/0x117
(...)

Fixes: 1bbc621ef2 ("Btrfs: allow block group cache writeout
                      outside critical section in commit")

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-04-26 06:26:37 -07:00
Filipe Manana
b58d1a9ef9 Btrfs: fix race between start dirty bg cache writeout and bg deletion
While running xfstests I ran into the following:

[20892.242791] ------------[ cut here ]------------
[20892.243776] WARNING: CPU: 0 PID: 13299 at fs/btrfs/super.c:260 __btrfs_abort_transaction+0x52/0x114 [btrfs]()
[20892.245874] BTRFS: Transaction aborted (error -2)
[20892.247329] Modules linked in: btrfs dm_snapshot dm_bufio dm_flakey dm_mod crc32c_generic xor raid6_pq nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc loop fuse$
[20892.258488] CPU: 0 PID: 13299 Comm: fsstress Tainted: G        W       4.0.0-rc5-btrfs-next-9+ #2
[20892.262011] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
[20892.264738]  0000000000000009 ffff880427f8bc18 ffffffff8142fa46 ffffffff8108b6a2
[20892.266244]  ffff880427f8bc68 ffff880427f8bc58 ffffffff81045ea5 ffff880427f8bc48
[20892.267761]  ffffffffa0509a6d 00000000fffffffe ffff8803545d6f40 ffffffffa05a15a0
[20892.269378] Call Trace:
[20892.269915]  [<ffffffff8142fa46>] dump_stack+0x4f/0x7b
[20892.271097]  [<ffffffff8108b6a2>] ? console_unlock+0x361/0x3ad
[20892.272173]  [<ffffffff81045ea5>] warn_slowpath_common+0xa1/0xbb
[20892.273386]  [<ffffffffa0509a6d>] ? __btrfs_abort_transaction+0x52/0x114 [btrfs]
[20892.274857]  [<ffffffff81045f05>] warn_slowpath_fmt+0x46/0x48
[20892.275851]  [<ffffffffa0509a6d>] __btrfs_abort_transaction+0x52/0x114 [btrfs]
[20892.277341]  [<ffffffffa0515e10>] write_one_cache_group+0x68/0xaf [btrfs]
[20892.278628]  [<ffffffffa052088a>] btrfs_start_dirty_block_groups+0x18d/0x29b [btrfs]
[20892.280191]  [<ffffffffa052f077>] btrfs_commit_transaction+0x130/0x9c9 [btrfs]
[20892.281781]  [<ffffffff8107d33d>] ? trace_hardirqs_on+0xd/0xf
[20892.282873]  [<ffffffffa054163b>] btrfs_sync_file+0x313/0x387 [btrfs]
[20892.284111]  [<ffffffff8117acad>] vfs_fsync_range+0x95/0xa4
[20892.285203]  [<ffffffff810e603f>] ? time_hardirqs_on+0x15/0x28
[20892.286290]  [<ffffffff8123960b>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[20892.287469]  [<ffffffff8117acd8>] vfs_fsync+0x1c/0x1e
[20892.288412]  [<ffffffff8117ae54>] do_fsync+0x34/0x4e
[20892.289348]  [<ffffffff8117b07c>] SyS_fsync+0x10/0x14
[20892.290255]  [<ffffffff81435b32>] system_call_fastpath+0x12/0x17
[20892.291316] ---[ end trace 597f77e664245373 ]---
[20892.293955] BTRFS: error (device sdg) in write_one_cache_group:3184: errno=-2 No such entry
[20892.297390] BTRFS info (device sdg): forced readonly

This happens because in btrfs_start_dirty_block_groups() we splice the
transaction's list of dirty block groups into a local list and then we
keep extracting the first element of the list without holding the
cache_write_mutex mutex. This means that before we acquire that mutex
the first block group on the list might be removed by a conurrent task
running btrfs_remove_block_group(). So make sure we extract the first
element (and test the list emptyness) while holding that mutex.

Fixes: 1bbc621ef2 ("Btrfs: allow block group cache writeout
                      outside critical section in commit")

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-04-26 06:26:37 -07:00
Jens Axboe
fe0f07d08e direct-io: only inc/dec inode->i_dio_count for file systems
do_blockdev_direct_IO() increments and decrements the inode
->i_dio_count for each IO operation. It does this to protect against
truncate of a file. Block devices don't need this sort of protection.

For a capable multiqueue setup, this atomic int is the only shared
state between applications accessing the device for O_DIRECT, and it
presents a scaling wall for that. In my testing, as much as 30% of
system time is spent incrementing and decrementing this value. A mixed
read/write workload improved from ~2.5M IOPS to ~9.6M IOPS, with
better latencies too. Before:

clat percentiles (usec):
 |  1.00th=[   33],  5.00th=[   34], 10.00th=[   34], 20.00th=[   34],
 | 30.00th=[   34], 40.00th=[   34], 50.00th=[   35], 60.00th=[   35],
 | 70.00th=[   35], 80.00th=[   35], 90.00th=[   37], 95.00th=[   80],
 | 99.00th=[   98], 99.50th=[  151], 99.90th=[  155], 99.95th=[  155],
 | 99.99th=[  165]

After:

clat percentiles (usec):
 |  1.00th=[   95],  5.00th=[  108], 10.00th=[  129], 20.00th=[  149],
 | 30.00th=[  155], 40.00th=[  161], 50.00th=[  167], 60.00th=[  171],
 | 70.00th=[  177], 80.00th=[  185], 90.00th=[  201], 95.00th=[  270],
 | 99.00th=[  390], 99.50th=[  398], 99.90th=[  418], 99.95th=[  422],
 | 99.99th=[  438]

In other setups, Robert Elliott reported seeing good performance
improvements:

https://lkml.org/lkml/2015/4/3/557

The more applications accessing the device, the worse it gets.

Add a new direct-io flags, DIO_SKIP_DIO_COUNT, which tells
do_blockdev_direct_IO() that it need not worry about incrementing
or decrementing the inode i_dio_count for this caller.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Elliott, Robert (Server Storage) <elliott@hp.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-24 15:45:28 -04:00
Chris Mason
a3bdccc4e6 Btrfs: prevent list corruption during free space cache processing
__btrfs_write_out_cache is holding the ctl->tree_lock while it prepares
a list of bitmaps to record in the free space cache.  It was dropping
the lock while it worked on other components, which made a window for
free_bitmap() to free the bitmap struct without removing it from the
list.

This changes things to hold the lock the whole time, and also makes sure
we hold the lock during enospc cleanup.

Reported-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-04-24 11:52:25 -07:00
Linus Torvalds
ba0e4ae88f Merge branch 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs updates from Chris Mason:
 "I've been running these through a longer set of load tests because my
  commits change the free space cache writeout.  It fixes commit stalls
  on large filesystems (~20T space used and up) that we have been
  triggering here.  We were seeing new writers blocked for 10 seconds or
  more during commits, which is far from good.

  Josef and I fixed up ENOSPC aborts when deleting huge files (3T or
  more), that are triggered because our metadata reservations were not
  properly accounting for crcs and were not replenishing during the
  truncate.

  Also in this series, a number of qgroup fixes from Fujitsu and Dave
  Sterba collected most of the pending cleanups from the list"

* 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (93 commits)
  btrfs: quota: Update quota tree after qgroup relationship change.
  btrfs: quota: Automatically update related qgroups or mark INCONSISTENT flags when assigning/deleting a qgroup relations.
  btrfs: qgroup: clear STATUS_FLAG_ON in disabling quota.
  btrfs: Update btrfs qgroup status item when rescan is done.
  btrfs: qgroup: Fix dead judgement on qgroup_rescan_leaf() return value.
  btrfs: Don't allow subvolid >= (1 << BTRFS_QGROUP_LEVEL_SHIFT) to be created
  btrfs: Check qgroup level in kernel qgroup assign.
  btrfs: qgroup: allow to remove qgroup which has parent but no child.
  btrfs: qgroup: return EINVAL if level of parent is not higher than child's.
  btrfs: qgroup: do a reservation in a higher level.
  Btrfs: qgroup, Account data space in more proper timings.
  Btrfs: qgroup: Introduce a may_use to account space_info->bytes_may_use.
  Btrfs: qgroup: free reserved in exceeding quota.
  Btrfs: qgroup: cleanup, remove an unsued parameter in btrfs_create_qgroup().
  btrfs: qgroup: fix limit args override whole limit struct
  btrfs: qgroup: update limit info in function btrfs_run_qgroups().
  btrfs: qgroup: consolidate the parameter of fucntion update_qgroup_limit_item().
  btrfs: qgroup: update qgroup in memory at the same time when we update it in btree.
  btrfs: qgroup: inherit limit info from srcgroup in creating snapshot.
  btrfs: Support busy loop of write and delete
  ...
2015-04-24 07:40:02 -07:00
Chris Mason
85db36cfb3 Btrfs: fix inode cache writeout
The code to fix stalls during free spache cache IO wasn't using
the correct root when waiting on the IO for inode caches.  This
is only a problem when the inode cache is enabled with

mount -o inode_cache

This fixes the inode cache writeout to preserve any error values and
makes sure not to override the root when inode cache writeout is done.

Reported-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-04-23 17:47:34 -07:00
David Howells
2b0143b5c9 VFS: normal filesystems (and lustre): d_inode() annotations
that's the bulk of filesystem drivers dealing with inodes of their own

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15 15:06:57 -04:00
Qu Wenruo
e082f56313 btrfs: quota: Update quota tree after qgroup relationship change.
Previous patch modified the in memory struct but it's not written in
quota tree until next commit.
So user will still get old data using "btrfs qgroup show" after
assign/remove.

This patch will call btrfs_run_qgroups in assign ioctl so it will be
updated to in memory quota trees and user will get up-to-date results.

Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-04-13 07:53:00 -07:00
Qu Wenruo
9c8b35b1ba btrfs: quota: Automatically update related qgroups or mark INCONSISTENT flags when assigning/deleting a qgroup relations.
Operation like qgroups assigning/deleting qgroup relations will mostly
cause qgroup data inconsistent, since it needs to do the full rescan to
determine whether shared extents are exclusive or still shared in
parent qgroups.

But there are some exceptions, like qgroup with only exclusive extents
(qgroup->excl == qgroup->rfer), in that case, we only needs to
modify all its parents' excl and rfer.

So this patch adds a quick path for such qgroup in qgroup
assign/remove routine, and if quick path failed, the qgroup status will
be marked INCONSISTENT, and return 1 to info user-land.

BTW since the quick path is much the same of qgroup_excl_accounting(),
so move the core of it to __qgroup_excl_accounting() and reuse it.

Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-04-13 07:52:59 -07:00
Dongsheng Yang
8ea0ec9e01 btrfs: qgroup: clear STATUS_FLAG_ON in disabling quota.
we forgot to clear STATUS_FLAG_ON in quota_disable(), it
will cause a problem shown as below:

	# mount /dev/sdc /mnt
	# btrfs quota enable /mnt
	# btrfs quota disable /mnt
	# btrfs quota rescan /mnt
	quota rescan started <--- expecting it fail here.
	# echo $?
	0

Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-04-13 07:52:58 -07:00
Qu Wenruo
53b7cde9d5 btrfs: Update btrfs qgroup status item when rescan is done.
Update qgroup status when rescan is done.

Before this patch, status item is not updated on rescan finish, which
causing the RESCAN and INCONSISTENT flags never cleared.

Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-04-13 07:52:57 -07:00
Qu Wenruo
3393168d22 btrfs: qgroup: Fix dead judgement on qgroup_rescan_leaf() return value.
Old qgroup_rescan_leaf() comment indicates ret == 2 as complete and
cleared INCONSISTENT flag.

This is not true since it will never return 2, and inside it no codes
will clear INCONSISTENT flag.
The flag clearance is done in btrfs_qgroup_rescan_work().
This caused the bug that INCONSISTENT flag is never cleared.

So change the comment and fix the dead judgment.

Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-04-13 07:52:55 -07:00
Qu Wenruo
e09fe2d211 btrfs: Don't allow subvolid >= (1 << BTRFS_QGROUP_LEVEL_SHIFT) to be created
Btrfs will create qgroup on subvolume creation if quota is enabled, but
qgroup uses the high bits(currently 16 bits) as level, to build the
inheritance.

However it is fully possible a subvolume can be created with a
subvolumeid larger than 1 << BTRFS_QGROUP_LEVEL_SHIFT, so it will be
considered as level 1 and can't be assigned to other qgroup in level 1.

This patch will prevent such things so qgroup inheritance will not be
screwed up.
The downside is very clear, btrfs subvolume number limit will decrease
from (u64 max - 256(fisrt free objectid) - 256(last free objectid)) to
(u48 max -256(first free objectid)).
But we still have near u48(that's 15 digits in dec), so that should not
be a huge problem.

Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-04-13 07:52:54 -07:00
Qu Wenruo
8465ecec96 btrfs: Check qgroup level in kernel qgroup assign.
Although we have qgroup level check in btrfs-progs, it's not enough
since other programe may still call ioctl directly not using
btrfs-progs. For example, systemd.

But it's btrfs-progs to be blame since we don't provide a
full-function(like subvolume create things) btrfs library with enough
check, and only rely on kernel ioctl.

So Add level checks in kernel too.

Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-04-13 07:52:53 -07:00
Dongsheng Yang
f5a6b1c53b btrfs: qgroup: allow to remove qgroup which has parent but no child.
When a qgroup has parents but no child, it should be removable in
Theory I think. But currently, we can not remove it when it has
either parent or child.

Example:
	# btrfs quota enable /mnt
	# btrfs qgroup create 1/0 /mnt
	# btrfs qgroup create 2/0 /mnt
	# btrfs qgroup assign 1/0 2/0 /mnt
	# btrfs qgroup show -pcre /mnt
qgroupid rfer  excl  max_rfer max_excl parent  child
-------- ----  ----  -------- -------- ------  -----
0/5      16384 16384 0        0        ---     ---
1/0      0     0     0        0        2/0     ---
2/0      0     0     0        0        ---     1/0

At this time, there is no subvol or qgroup depending on it.
Just a qgroup 2/0 is its parent, but 2/0 can work well without
1/0. So I think 1/0 should be removalbe. But:
	# btrfs qgroup destroy 1/0 /mnt
ERROR: unable to destroy quota group: Device or resource busy

This patch remove the check of qgroup->parent in removing it,
then we can remove a qgroup when it has a parent.

Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-04-13 07:52:52 -07:00
Dongsheng Yang
09870d2772 btrfs: qgroup: return EINVAL if level of parent is not higher than child's.
When we create a subvol inheriting a qgroup, we need to check the level
of them. Otherwise, there is a chance a qgroup can inherit another qgroup
at the same level.

Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-04-13 07:52:51 -07:00
Dongsheng Yang
e2d1f92399 btrfs: qgroup: do a reservation in a higher level.
There are two problems in qgroup:

a). The PAGE_CACHE is 4K, even when we are writing a data of 1K,
qgroup will reserve a 4K size. It will cause the last 3K in a qgroup
is not available to user.

b). When user is writing a inline data, qgroup will not reserve it,
it means this is a window we can exceed the limit of a qgroup.

The main idea of this patch is reserving the data size of write_bytes
rather than the reserve_bytes. It means qgroup will not care about
the data size btrfs will reserve for user, but only care about the
data size user is going to write. Then reserve it when user want to
write and release it in transaction committed.

In this way, qgroup can be released from the complex procedure in
btrfs and only do the reserve when user want to write and account
when the data is written in commit_transaction().

Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-04-13 07:52:50 -07:00
Dongsheng Yang
237c0e9f1f Btrfs: qgroup, Account data space in more proper timings.
Currenly, in data writing, ->reserved is accounted in
fill_delalloc(), but ->may_use is released in clear_bit_hook()
which is called by btrfs_finish_ordered_io(). That's too late,
that said, between fill_delalloc() and btrfs_finish_ordered_io(),
the data is doublely accounted by qgroup. It will cause some
unexpected -EDQUOT.

Example:
	# btrfs quota enable /root/btrfs-auto-test/
	# btrfs subvolume create /root/btrfs-auto-test//sub
	Create subvolume '/root/btrfs-auto-test/sub'
	# btrfs qgroup limit 1G /root/btrfs-auto-test//sub
	dd if=/dev/zero of=/root/btrfs-auto-test//sub/file bs=1024 count=1500000
	dd: error writing '/root/btrfs-auto-test//sub/file': Disk quota exceeded
	681353+0 records in
	681352+0 records out
	697704448 bytes (698 MB) copied, 8.15563 s, 85.5 MB/s
It's (698 MB) when we got an -EDQUOT, but we limit it by 1G.

This patch move the btrfs_qgroup_reserve/free() for data from
btrfs_delalloc_reserve/release_metadata() to btrfs_check_data_free_space()
and btrfs_free_reserved_data_space(). Then the accounter in qgroup
will be updated at the same time with the accounter in space_info updated.
In this way, the unexpected -EDQUOT will be killed.

Reported-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-04-13 07:52:48 -07:00
Dongsheng Yang
31193213f1 Btrfs: qgroup: Introduce a may_use to account space_info->bytes_may_use.
Currently, for pre_alloc or delay_alloc, the bytes will be accounted
in space_info by the three guys.
space_info->bytes_may_use --- space_info->reserved --- space_info->used.
But on the other hand, in qgroup, there are only two counters to account the
bytes, qgroup->reserved and qgroup->excl. And qg->reserved accounts
bytes in space_info->bytes_may_use and qg->excl accounts bytes in
space_info->used. So the bytes in space_info->reserved is not accounted
in qgroup. If so, there is a window we can exceed the quota limit when
bytes is in space_info->reserved.

Example:
	# btrfs quota enable /mnt
	# btrfs qgroup limit -e 10M /mnt
	# for((i=0;i<20;i++));do fallocate -l 1M /mnt/data$i; done
	# sync
	# btrfs qgroup show -pcre /mnt
qgroupid rfer     excl     max_rfer max_excl parent  child
-------- ----     ----     -------- -------- ------  -----
0/5      20987904 20987904 0        10485760 ---     ---

qg->excl is 20987904 larger than max_excl 10485760.

This patch introduce a new counter named may_use to qgroup, then
there are three counters in qgroup to account bytes in space_info
as below.
space_info->bytes_may_use --- space_info->reserved --- space_info->used.
qgroup->may_use           --- qgroup->reserved     --- qgroup->excl

With this patch applied:
	# btrfs quota enable /mnt
	# btrfs qgroup limit -e 10M /mnt
	# for((i=0;i<20;i++));do fallocate -l 1M /mnt/data$i; done
fallocate: /mnt/data9: fallocate failed: Disk quota exceeded
fallocate: /mnt/data10: fallocate failed: Disk quota exceeded
fallocate: /mnt/data11: fallocate failed: Disk quota exceeded
fallocate: /mnt/data12: fallocate failed: Disk quota exceeded
fallocate: /mnt/data13: fallocate failed: Disk quota exceeded
fallocate: /mnt/data14: fallocate failed: Disk quota exceeded
fallocate: /mnt/data15: fallocate failed: Disk quota exceeded
fallocate: /mnt/data16: fallocate failed: Disk quota exceeded
fallocate: /mnt/data17: fallocate failed: Disk quota exceeded
fallocate: /mnt/data18: fallocate failed: Disk quota exceeded
fallocate: /mnt/data19: fallocate failed: Disk quota exceeded
	# sync
	# btrfs qgroup show -pcre /mnt
qgroupid rfer    excl    max_rfer max_excl parent  child
-------- ----    ----    -------- -------- ------  -----
0/5      9453568 9453568 0        10485760 ---     ---

Reported-by: Cyril SCETBON <cyril.scetbon@free.fr>
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-04-13 07:52:47 -07:00
Dongsheng Yang
804ca127fb Btrfs: qgroup: free reserved in exceeding quota.
When we exceed quota limit in writing, we will free
some reserved extent when we need to drop but not free
account in qgroup. It means, each time we exceed quota
in writing, there will be some remain space in qg->reserved
we can not use any more. If things go on like this, the
all space will be ate up.

Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-04-13 07:52:46 -07:00
Dongsheng Yang
4087cf24ae Btrfs: qgroup: cleanup, remove an unsued parameter in btrfs_create_qgroup().
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-04-13 07:52:44 -07:00
Dongsheng Yang
03477d945f btrfs: qgroup: fix limit args override whole limit struct
btrfs_limit_group use arg limit to override the old qgroup_limit of
corresponding qgroup. However, we should override part of old qgroup_limit
according to the bit which has been set in arg limit.

Signed-off-by: Fan Chengniang <fancn.fnst@cn.fujitsu.com>
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-04-13 07:52:43 -07:00
Dongsheng Yang
d3001ed3a8 btrfs: qgroup: update limit info in function btrfs_run_qgroups().
When we commit_transaction(), qgroups in btree should be updated.
But, limit info is not considered currently. It will cause a problem
when a qgroup of a snapshot inherit the limit info from srcqgroup,
then there is an inconsistency.

Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-04-13 07:52:42 -07:00
Dongsheng Yang
1510e71c62 btrfs: qgroup: consolidate the parameter of fucntion update_qgroup_limit_item().
Cleanup: Change the parameter of update_qgroup_limit_item() to the family of
update_qgroup_xxx_item().

Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-04-13 07:52:41 -07:00
Dongsheng Yang
e8c8541ac3 btrfs: qgroup: update qgroup in memory at the same time when we update it in btree.
When we call btrfs_qgroup_inherit() with BTRFS_QGROUP_INHERIT_SET_LIMITS,
btrfs will update the limit info of qgroup in btree but forget to update
the qgroup in rbtree at the same time. It obviousely will cause an inconsistency.

This patch fix it by updating the rbtree at the same time.

Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-04-13 07:52:40 -07:00
Dongsheng Yang
3eeb4d597e btrfs: qgroup: inherit limit info from srcgroup in creating snapshot.
Currently, when we snapshot a subvol, snapshot will not copy the limits
from srcqgroup.

This patch make the qgroup in snapshot inherit the limit info when create
a snapshot.

Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-04-13 07:52:38 -07:00
Zhao Lei
c99f1b0c6c btrfs: Support busy loop of write and delete
Reproduce:
 while true; do
   dd if=/dev/zero of=/mnt/btrfs/file count=[75% fs_size]
   rm /mnt/btrfs/file
 done
 Then we can see above loop failed on NO_SPACE.

It it long-term problem since very beginning, because delayed-iput
after rm are not run.

We already have commit_transaction() in alloc_space code, but it is
not triggered in above case.
This patch trigger commit_transaction() to run delayed-iput and
reflash pinned-space to to make write success.

It is based on previous fix of delayed-iput in commit_transaction(),
need to be applied on top of:
btrfs: Fix NO_SPACE bug caused by delayed-iput

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-04-13 07:31:10 -07:00
Zhao Lei
d7c151717a btrfs: Fix NO_SPACE bug caused by delayed-iput
Steps to reproduce:
  while true; do
    dd if=/dev/zero of=/btrfs_dir/file count=[fs_size * 75%]
    rm /btrfs_dir/file
    sync
  done

  And we'll see dd failed because btrfs return NO_SPACE.

Reason:
  Normally, btrfs_commit_transaction() call btrfs_run_delayed_iputs()
  in end to free fs space for next write, but sometimes it hadn't
  done work on time, because btrfs-cleaner thread get delayed-iputs
  from list before, but do iput() after next write.

  This is log:
  [ 2569.050776] comm=btrfs-cleaner func=btrfs_evict_inode() begin

  [ 2569.084280] comm=sync func=btrfs_commit_transaction() call btrfs_run_delayed_iputs()
  [ 2569.085418] comm=sync func=btrfs_commit_transaction() done btrfs_run_delayed_iputs()
  [ 2569.087554] comm=sync func=btrfs_commit_transaction() end

  [ 2569.191081] comm=dd begin
  [ 2569.790112] comm=dd func=__btrfs_buffered_write() ret=-28

  [ 2569.847479] comm=btrfs-cleaner func=add_pinned_bytes() 0 + 32677888 = 32677888
  [ 2569.849530] comm=btrfs-cleaner func=add_pinned_bytes() 32677888 + 23834624 = 56512512
  ...
  [ 2569.903893] comm=btrfs-cleaner func=add_pinned_bytes() 943976448 + 21762048 = 965738496
  [ 2569.908270] comm=btrfs-cleaner func=btrfs_evict_inode() end

Fix:
  Make btrfs_commit_transaction() wait current running btrfs-cleaner's
  delayed-iputs() done in end.

Test:
  Use script similar to above(more complex),
  before patch:
    7 failed in 100 * 20 loop.
  after patch:
    0 failed in 100 * 20 loop.

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-04-13 07:27:41 -07:00