mirror of
https://github.com/edk2-porting/linux-next.git
synced 2025-01-08 21:53:54 +08:00
73d28d571d
5407 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Baruch Siach
|
71b800b628 |
rtc: digicolor: document device tree binding
Add a device tree binding documentation to the Real Time Clock hardware block on the Conexant CX92755 SoC. The CX92755 is from the Digicolor SoCs series. Other SoCs in that series may share the same hardware block. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Uwe Kleine-König
|
7f48b21bdf |
rtc: stmp3xxx: use optional crystal in low power states
The rtc's status register allows to determine if a 32k crystal is connected to keep the rtc running in low power states provided the corresponding fuse bits were blown correctly during production. (In case they were not, the right frequency can be stated in the device tree.) If there is no such crystal available force the 24 MHz XTAL clock to keep running to retain the right date and time. Otherwise use the crystal to save some power. It would be nice to only switch to the crystal when the XTAL clock is about to be disabled and keep the crystal off when unneeded because XTAL is always on while the chip is powered on. But as sudden power loss isn't detectable this is not save. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Linus Torvalds
|
e7c8241243 |
Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds
Pull LED subsystem updates from Bryan Wu: "In this cycle, we merged some fix and update for LED Flash class driver. Then the core code of LED Flash class driver is in the kernel now. Moreover, we also got some bug fixes, code cleanup and new drivers for LED controllers" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: leds: Don't treat the LED name as a format string leds: Use log level warn instead of info when telling about a name clash leds/led-class: Handle LEDs with the same name leds: lp8860: Fix typo in MODULE_DESCRIPTION in leds-lp8860.c leds: lp8501: Fix typo in MODULE_DESCRIPTION in leds-lp8501.c DT: leds: Add uniqueness requirement for 'label' property. dt-binding: leds: Add common LED DT bindings macros leds: add Qualcomm PM8941 WLED driver leds: add DT binding for Qualcomm PM8941 WLED block leds: pca963x: Add missing initialiation of struct led_info.flags leds: flash: Fix the size of sysfs_groups array Documentation: leds: Add description of LED Flash class extension leds: flash: document sysfs interface leds: flash: Remove synchronized flash strobe feature leds: Introduce devres helper for led_classdev_register leds: lp8860: make use of devm_gpiod_get_optional leds: Let the binding document example for leds-gpio follow the gpio bindings leds: flash: remove stray include directive leds: leds-pwm: drop one pwm_get_period() call |
||
|
Linus Torvalds
|
d0a3997c0c |
sound updates for 4.1-rc1
There have been major modernization with the standard bus: in ALSA
sequencer core and HD-audio. Also, HD-audio receives the regmap
support replacing the in-house cache register cache code. These
changes shouldn't impact the existing behavior, but rather
refactoring.
In addition, HD-audio got the code split to a core library part and
the "legacy" driver parts. This is a preliminary work for adapting
the upcoming ASoC HD-audio driver, and the whole transition is still
work in progress, likely finished in 4.1.
Along with them, there are many updates in ASoC area as usual, too:
lots of cleanups, Intel code shuffling, etc.
Here are some highlights:
ALSA core:
- PCM: the audio timestamp / wallclock enhancement
- PCM: fixes in DPCM management
- Fixes / cleanups of user-space control element management
- Sequencer: modernization using the standard bus
HD-audio:
- Modernization using the standard bus
- Regmap support
- Use standard runtime PM for codec power saving
- Widget-path based power-saving for IDT, VIA and Realtek codecs
- Reorganized sysfs entries for each codec object
- More Dell headset support
ASoC:
- Move of jack registration to the card level
- Lots of ASoC cleanups, mainly moving things from the CODEC level
to the card level
- Support for DAPM routes specified by both the machine driver and DT
- Continuing improvements to rcar
- pcm512x enhacements
- Intel platforms updates
- rt5670 updates / fixes
- New platforms / devices: some non-DSP Qualcomm platforms, Google's
Storm platform, Maxmim MAX98925 CODECs and the Ingenic JZ4780 SoC
Misc:
- ice1724: Improved ESI W192M support
- emu10k1: Emu 1010 fixes/enhancement
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=4z5j
-----END PGP SIGNATURE-----
Merge tag 'sound-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"There have been major modernization with the standard bus: in ALSA
sequencer core and HD-audio. Also, HD-audio receives the regmap
support replacing the in-house cache register cache code. These
changes shouldn't impact the existing behavior, but rather
refactoring.
In addition, HD-audio got the code split to a core library part and
the "legacy" driver parts. This is a preliminary work for adapting
the upcoming ASoC HD-audio driver, and the whole transition is still
work in progress, likely finished in 4.1.
Along with them, there are many updates in ASoC area as usual, too:
lots of cleanups, Intel code shuffling, etc.
Here are some highlights:
ALSA core:
- PCM: the audio timestamp / wallclock enhancement
- PCM: fixes in DPCM management
- Fixes / cleanups of user-space control element management
- Sequencer: modernization using the standard bus
HD-audio:
- Modernization using the standard bus
- Regmap support
- Use standard runtime PM for codec power saving
- Widget-path based power-saving for IDT, VIA and Realtek codecs
- Reorganized sysfs entries for each codec object
- More Dell headset support
ASoC:
- Move of jack registration to the card level
- Lots of ASoC cleanups, mainly moving things from the CODEC level to
the card level
- Support for DAPM routes specified by both the machine driver and DT
- Continuing improvements to rcar
- pcm512x enhacements
- Intel platforms updates
- rt5670 updates / fixes
- New platforms / devices: some non-DSP Qualcomm platforms, Google's
Storm platform, Maxmim MAX98925 CODECs and the Ingenic JZ4780 SoC
Misc:
- ice1724: Improved ESI W192M support
- emu10k1: Emu 1010 fixes/enhancement"
* tag 'sound-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (411 commits)
ALSA: hda - set GET bit when adding a vendor verb to the codec regmap
ALSA: hda/realtek - Enable the ALC292 dock fixup on the Thinkpad T450
ALSA: hda - Fix another race in runtime PM refcounting
ALSA: hda - Expose codec type sysfs
ALSA: ctl: fix to handle several elements added by one operation for userspace element
ASoC: Intel: fix array_size.cocci warnings
ASoC: n810: Automatically disconnect non-connected pins
ASoC: n810: Consistently pass the card DAPM context to n810_ext_control()
ASoC: davinci-evm: Use card DAPM context to access widgets
ASoC: mop500_ab8500: Use card DAPM context to access widgets
ASoC: wm1133-ev1: Use card DAPM context to access widgets
ASoC: atmel: Improve machine driver compile test coverage
ASoC: atmel: Add dependency to SND_SOC_I2C_AND_SPI where necessary
ALSA: control: Fix a typo of SNDRV_CTL_ELEM_ACCESS_TLV_* with SNDRV_CTL_TLV_OP_*
ALSA: usb-audio: Don't attempt to get Microsoft Lifecam Cinema sample rate
ASoC: rnsd: fix build regression without CONFIG_OF
ALSA: emu10k1: add toggles for E-mu 1010 optical ports
ALSA: ctl: fill identical information to return value when adding userspace elements
ALSA: ctl: fix a bug to return no identical information in info operation for userspace controls
ALSA: ctl: confirm to return all identical information in 'activate' event
...
|
||
|
Linus Torvalds
|
d488d3a4ce |
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris: "Highlights for this window: - improved AVC hashing for SELinux by John Brooks and Stephen Smalley - addition of an unconfined label to Smack - Smack documentation update - TPM driver updates" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (28 commits) lsm: copy comm before calling audit_log to avoid race in string printing tomoyo: Do not generate empty policy files tomoyo: Use if_changed when generating builtin-policy.h tomoyo: Use bin2c to generate builtin-policy.h selinux: increase avtab max buckets selinux: Use a better hash function for avtab selinux: convert avtab hash table to flex_array selinux: reconcile security_netlbl_secattr_to_sid() and mls_import_netlbl_cat() selinux: remove unnecessary pointer reassignment Smack: Updates for Smack documentation tpm/st33zp24/spi: Add missing device table for spi phy. tpm/st33zp24: Add proper wait for ordinal duration in case of irq mode smack: Fix gcc warning from unused smack_syslog_lock mutex in smackfs.c Smack: Allow an unconfined label in bringup mode Smack: getting the Smack security context of keys Smack: Assign smack_known_web as default smk_in label for kernel thread's socket tpm/tpm_infineon: Use struct dev_pm_ops for power management MAINTAINERS: Add Jason as designated reviewer for TPM tpm: Update KConfig text to include TPM2.0 FIFO chips tpm/st33zp24/dts/st33zp24-spi: Add dts documentation for st33zp24 spi phy ... |
||
|
Linus Torvalds
|
cb906953d2 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu: "Here is the crypto update for 4.1: New interfaces: - user-space interface for AEAD - user-space interface for RNG (i.e., pseudo RNG) New hashes: - ARMv8 SHA1/256 - ARMv8 AES - ARMv8 GHASH - ARM assembler and NEON SHA256 - MIPS OCTEON SHA1/256/512 - MIPS img-hash SHA1/256 and MD5 - Power 8 VMX AES/CBC/CTR/GHASH - PPC assembler AES, SHA1/256 and MD5 - Broadcom IPROC RNG driver Cleanups/fixes: - prevent internal helper algos from being exposed to user-space - merge common code from assembly/C SHA implementations - misc fixes" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (169 commits) crypto: arm - workaround for building with old binutils crypto: arm/sha256 - avoid sha256 code on ARMv7-M crypto: x86/sha512_ssse3 - move SHA-384/512 SSSE3 implementation to base layer crypto: x86/sha256_ssse3 - move SHA-224/256 SSSE3 implementation to base layer crypto: x86/sha1_ssse3 - move SHA-1 SSSE3 implementation to base layer crypto: arm64/sha2-ce - move SHA-224/256 ARMv8 implementation to base layer crypto: arm64/sha1-ce - move SHA-1 ARMv8 implementation to base layer crypto: arm/sha2-ce - move SHA-224/256 ARMv8 implementation to base layer crypto: arm/sha256 - move SHA-224/256 ASM/NEON implementation to base layer crypto: arm/sha1-ce - move SHA-1 ARMv8 implementation to base layer crypto: arm/sha1_neon - move SHA-1 NEON implementation to base layer crypto: arm/sha1 - move SHA-1 ARM asm implementation to base layer crypto: sha512-generic - move to generic glue implementation crypto: sha256-generic - move to generic glue implementation crypto: sha1-generic - move to generic glue implementation crypto: sha512 - implement base layer for SHA-512 crypto: sha256 - implement base layer for SHA-256 crypto: sha1 - implement base layer for SHA-1 crypto: api - remove instance when test failed crypto: api - Move alg ref count init to crypto_check_alg ... |
||
|
Linus Torvalds
|
6c373ca893 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
1) Add BQL support to via-rhine, from Tino Reichardt.
2) Integrate SWITCHDEV layer support into the DSA layer, so DSA drivers
can support hw switch offloading. From Floria Fainelli.
3) Allow 'ip address' commands to initiate multicast group join/leave,
from Madhu Challa.
4) Many ipv4 FIB lookup optimizations from Alexander Duyck.
5) Support EBPF in cls_bpf classifier and act_bpf action, from Daniel
Borkmann.
6) Remove the ugly compat support in ARP for ugly layers like ax25,
rose, etc. And use this to clean up the neigh layer, then use it to
implement MPLS support. All from Eric Biederman.
7) Support L3 forwarding offloading in switches, from Scott Feldman.
8) Collapse the LOCAL and MAIN ipv4 FIB tables when possible, to speed
up route lookups even further. From Alexander Duyck.
9) Many improvements and bug fixes to the rhashtable implementation,
from Herbert Xu and Thomas Graf. In particular, in the case where
an rhashtable user bulk adds a large number of items into an empty
table, we expand the table much more sanely.
10) Don't make the tcp_metrics hash table per-namespace, from Eric
Biederman.
11) Extend EBPF to access SKB fields, from Alexei Starovoitov.
12) Split out new connection request sockets so that they can be
established in the main hash table. Much less false sharing since
hash lookups go direct to the request sockets instead of having to
go first to the listener then to the request socks hashed
underneath. From Eric Dumazet.
13) Add async I/O support for crytpo AF_ALG sockets, from Tadeusz Struk.
14) Support stable privacy address generation for RFC7217 in IPV6. From
Hannes Frederic Sowa.
15) Hash network namespace into IP frag IDs, also from Hannes Frederic
Sowa.
16) Convert PTP get/set methods to use 64-bit time, from Richard
Cochran.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1816 commits)
fm10k: Bump driver version to 0.15.2
fm10k: corrected VF multicast update
fm10k: mbx_update_max_size does not drop all oversized messages
fm10k: reset head instead of calling update_max_size
fm10k: renamed mbx_tx_dropped to mbx_tx_oversized
fm10k: update xcast mode before synchronizing multicast addresses
fm10k: start service timer on probe
fm10k: fix function header comment
fm10k: comment next_vf_mbx flow
fm10k: don't handle mailbox events in iov_event path and always process mailbox
fm10k: use separate workqueue for fm10k driver
fm10k: Set PF queues to unlimited bandwidth during virtualization
fm10k: expose tx_timeout_count as an ethtool stat
fm10k: only increment tx_timeout_count in Tx hang path
fm10k: remove extraneous "Reset interface" message
fm10k: separate PF only stats so that VF does not display them
fm10k: use hw->mac.max_queues for stats
fm10k: only show actual queues, not the maximum in hardware
fm10k: allow creation of VLAN on default vid
fm10k: fix unused warnings
...
|
||
|
Linus Torvalds
|
bb0fd7ab09 |
Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
"Included in this update are both some long term fixes and some new
features.
Fixes:
- An integer overflow in the calculation of ELF_ET_DYN_BASE.
- Avoiding OOMs for high-order IOMMU allocations
- SMP requires the data cache to be enabled for synchronisation
primitives to work, so prevent the CPU_DCACHE_DISABLE option being
visible on SMP builds.
- A bug going back 10+ years in the noMMU ARM94* CPU support code,
where it corrupts registers. Found by folk getting Linux running
on their cameras.
- Versatile Express needs an errata workaround enabled for CPU
hot-unplug to work.
Features:
- Clean up module linker by handling out of range relocations
separately from relocation cases we don't handle.
- Fix a long term bug in the pci_mmap_page_range() code, which we
hope won't impact userspace (we hope there's no users of the
existing broken interface.)
- Don't map DMA coherent allocations when we don't have a MMU.
- Drop experimental status for SMP_ON_UP.
- Warn when DT doesn't specify ePAPR mandatory cache properties.
- Add documentation concerning how we find the start of physical
memory for AUTO_ZRELADDR kernels, detailing why we have chosen the
mask and the implications of changing it.
- Updates from Ard Biesheuvel to address some issues with large
kernels (such as allyesconfig) failing to link.
- Allow hibernation to work on modern (ARMv7) CPUs - this appears to
have never worked in the past on these CPUs.
- Enable IRQ_SHOW_LEVEL, which changes the /proc/interrupts output
format (hopefully without userspace breaking... let's hope that if
it causes someone a problem, they tell us.)
- Fix tegra-ahb DT offsets.
- Rework ARM errata 643719 code (and ARMv7 flush_cache_louis()/
flush_dcache_all()) code to be more efficient, and enable this
errata workaround by default for ARMv7+SMP CPUs. This complements
the Versatile Express fix above.
- Rework ARMv7 context code for errata 430973, so that only Cortex A8
CPUs are impacted by the branch target buffer flush when this
errata is enabled. Also update the help text to indicate that all
r1p* A8 CPUs are impacted.
- Switch ARM to the generic show_mem() implementation, it conveys all
the information which we were already reporting.
- Prevent slow timer sources being used for udelay() - timers running
at less than 1MHz are not useful for this, and can cause udelay()
to return immediately, without any wait. Using such a slow timer
is silly.
- VDSO support for 32-bit ARM, mainly for gettimeofday() using the
ARM architected timer.
- Perf support for Scorpion performance monitoring units"
vdso semantic conflict fixed up as per linux-next.
* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (52 commits)
ARM: update errata 430973 documentation to cover Cortex A8 r1p*
ARM: ensure delay timer has sufficient accuracy for delays
ARM: switch to use the generic show_mem() implementation
ARM: proc-v7: avoid errata 430973 workaround for non-Cortex A8 CPUs
ARM: enable ARM errata 643719 workaround by default
ARM: cache-v7: optimise test for Cortex A9 r0pX devices
ARM: cache-v7: optimise branches in v7_flush_cache_louis
ARM: cache-v7: consolidate initialisation of cache level index
ARM: cache-v7: shift CLIDR to extract appropriate field before masking
ARM: cache-v7: use movw/movt instructions
ARM: allow 16-bit instructions in ALT_UP()
ARM: proc-arm94*.S: fix setup function
ARM: vexpress: fix CPU hotplug with CT9x4 tile.
ARM: 8276/1: Make CPU_DCACHE_DISABLE depend on !SMP
ARM: 8335/1: Documentation: DT bindings: Tegra AHB: document the legacy base address
ARM: 8334/1: amba: tegra-ahb: detect and correct bogus base address
ARM: 8333/1: amba: tegra-ahb: fix register offsets in the macros
ARM: 8339/1: Enable CONFIG_GENERIC_IRQ_SHOW_LEVEL
ARM: 8338/1: kexec: Relax SMP validation to improve DT compatibility
ARM: 8337/1: mm: Do not invoke OOM for higher order IOMMU DMA allocations
...
|
||
|
Linus Torvalds
|
8691c130fa |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input subsystem updates from Dmitry Torokhov: "You will get the following new drivers: - Qualcomm PM8941 power key drver - ChipOne icn8318 touchscreen controller driver - Broadcom iProc touchscreen and keypad drivers - Semtech SX8654 I2C touchscreen controller driver ALPS driver now supports newer SS4 devices; Elantech got a fix that should make it work on some ASUS laptops; and a slew of other enhancements and random fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (51 commits) Input: alps - non interleaved V2 dualpoint has separate stick button bits Input: alps - fix touchpad buttons getting stuck when used with trackpoint Input: atkbd - document "no new force-release quirks" policy Input: ALPS - make alps_get_pkt_id_ss4_v2() and others static Input: ALPS - V7 devices can report 5-finger taps Input: ALPS - add support for SS4 touchpad devices Input: ALPS - refactor alps_set_abs_params_mt() Input: elantech - fix absolute mode setting on some ASUS laptops Input: atmel_mxt_ts - split out touchpad initialisation logic Input: atmel_mxt_ts - implement support for T100 touch object Input: cros_ec_keyb - fix clearing keyboard state on wakeup Input: gscps2 - drop pci_ids dependency Input: synaptics - allocate 3 slots to keep stability in image sensors Input: Revert "Revert "synaptics - use dmax in input_mt_assign_slots"" Input: MT - make slot assignment work for overcovered solutions mfd: tc3589x: enforce device-tree only mode Input: tc3589x - localize platform data Input: tsc2007 - Convert msecs to jiffies only once Input: edt-ft5x06 - remove EV_SYN event report Input: edt-ft5x06 - allow to setting the maximum axes value through the DT ... |
||
|
Linus Torvalds
|
c3a416a669 |
Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Most notable:
- introducing the i2c_quirk infrastructure. Now, flaws of I2C
controllers can be described and the core will check if the flaws
collide with the messages to be sent
- wait_for_completion return type cleanup series
- new drivers for Digicolor, Netlogic XLP, Ingenic JZ4780
- updates to the I2C slave framework which include API changes. Its
only user was updated, too. Documentation was finally added
- changed dynamic bus numbering for the DT case. This could change
bus numbers for users. However, it fixes a collision where dynamic
and static busses request the same id.
- driver bugfixes, cleanups"
* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (52 commits)
i2c: xlp9xx: Driver for Netlogic XLP9XX/5XX I2C controller
of: Add vendor prefix 'netlogic'
i2c: davinci: use ICPFUNC to toggle I2C as gpio for bus recovery
i2c: davinci: use bus recovery infrastructure
i2c: change input parameter to i2c_adapter for prepare/unprepare_recovery
i2c: i2c-mux-gpio: remove error messages for probe deferrals
i2c: jz4780: Add i2c bus controller driver for Ingenic JZ4780
i2c: dln2: set the device tree node of the adapter
i2c: davinci: fixup wait_for_completion_timeout handling
i2c: mpc: Fix ISR return value
i2c: slave-eeprom: add more info when to increase the pointer
i2c: slave: add documentation for i2c-slave-eeprom
Documentation: i2c: describe the new slave mode
i2c: slave: rework the slave API
i2c: add support for the Digicolor I2C controller
i2c: busses with dynamic ids should start after fixed ids for DT
of: base: add function to get highest id of an alias stem
i2c: designware: Suppress error message if platform_get_irq() < 0
i2c: mpc: assign the correct prescaler from SVR
i2c: img-scb: fixup of wait_for_completion_timeout return handling
...
|
||
|
Linus Torvalds
|
07e492eb89 |
This is the bulk of pin control changes for the v4.1 development
cycle:
New drivers:
- Intel Sunrisepoint
- AMD KERNCZ GPIO
- Broadcom Cygnus IOMUX
New subdrivers:
- Marvell MVEBU Armada 39x SoCs
- Samsung Exynos 5433
- nVidia Tegra 210
- Mediatek MT8135
- Mediatek MT8173
- AMLogic Meson8b
- Qualcomm PM8916
On top of this cleanups and development history for the above
drivers as issues were fixed after merging.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=MGqe
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pincontrol updates from Linus Walleij:
"This is the bulk of pin control changes for the v4.1 development
cycle. Nothing really exciting this time: we basically added a few
new drivers and subdrivers and stabilized them in linux-next. Some
cleanups too. With sunrisepoint Intel has a real fine fully featured
pin control driver for contemporary hardware, and the AMD driver is
also for large deployments. Most of the others are ARM devices.
New drivers:
- Intel Sunrisepoint
- AMD KERNCZ GPIO
- Broadcom Cygnus IOMUX
New subdrivers:
- Marvell MVEBU Armada 39x SoCs
- Samsung Exynos 5433
- nVidia Tegra 210
- Mediatek MT8135
- Mediatek MT8173
- AMLogic Meson8b
- Qualcomm PM8916
On top of this cleanups and development history for the above drivers
as issues were fixed after merging"
* tag 'pinctrl-v4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (71 commits)
pinctrl: sirf: move sgpio lock into state container
pinctrl: Add support for PM8916 GPIO's and MPP's
pinctrl: bcm2835: Fix support for threaded level triggered IRQs
sh-pfc: r8a7790: add EtherAVB pin groups
pinctrl: Document "function" + "pins" pinmux binding
pinctrl: intel: Add Intel Sunrisepoint pin controller and GPIO support
pinctrl: fsl: imx: Check for 0 config register
pinctrl: Add support for Meson8b
documentation: Extend pinctrl docs for Meson8b
pinctrl: Cleanup Meson8 driver
Fix inconsistent spinlock of AMD GPIO driver which can be recognized by static analysis tool smatch. Declare constant Variables with Sparse's suggestion.
pinctrl: at91: convert __raw to endian agnostic IO
pinctrl: constify of_device_id array
pinctrl: pinconf-generic: add dt node names to error messages
pinctrl: pinconf-generic: scan also referenced phandle node
pinctrl: mvebu: add suspend/resume support to Armada XP pinctrl driver
pinctrl: st: Display pin's function when printing pinctrl debug information
pinctrl: st: Show correct pin direction also in GPIO mode
pinctrl: st: Supply a GPIO get_direction() call-back
pinctrl: st: Move st_get_pio_control() further up the source file
...
|
||
|
Linus Torvalds
|
f0c1bc95a1 |
== Changes to existing drivers ==
- Rename child driver [axp288_battery => axp288_fuel_gauge]; axp20x
- Rename child driver [max77693-flash => max77693-led]; max77693
- Error handling fixes; intel_soc_pmic
- GPIO tweaking; intel_soc_pmic
- Remove non-DT code; vexpress-sysreg, tc3589x
- Remove unused/legacy code; ti_am335x_tscadc, rts5249, rtsx_gops, rtsx_pcr,
rtc-s5m, sec-core, max77693, menelaus,
wm5102-tables
- Trivial fixups; rtsx_pci, da9150-core, sec-core, max7769, max77693,
mc13xxx-core, dln2, hi6421-pmic-core, rk808, twl4030-power,
lpc_ich, menelaus, twl6040
- Update register/address values; rts5227, rts5249
- DT and/or binding document fixups; arizona, da9150, mt6397, axp20x,
qcom-rpm, qcom-spmi-pmic
- Couple of trivial core Kconfig fixups
- Remove use of seq_printf return value; ab8500-debugfs
- Remove __exit markups; menelaus, tps65010
- Fix platform-device name collisions; mfd-core
== New drivers/supported devices ==
- Add support for wm8280/wm8281 into arizona
- Add support for COMe-cBL6 into kempld-core
- Add support for rts524a and rts525a into rts5249
- Add support for ipq8064 into qcom_rpm
- Add support for extcon into axp20x
- New MediaTek MT6397 PMIC driver
- New Maxim MAX77843 PMIC dirver
- New Intel Quark X1000 I2C-GPIO driver
- New Skyworks SKY81452 driver
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=QPNn
-----END PGP SIGNATURE-----
Merge tag 'mfd-for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Changes to existing drivers:
- Rename child driver [axp288_battery => axp288_fuel_gauge]; axp20x
- Rename child driver [max77693-flash => max77693-led]; max77693
- Error handling fixes; intel_soc_pmic
- GPIO tweaking; intel_soc_pmic
- Remove non-DT code; vexpress-sysreg, tc3589x
- Remove unused/legacy code; ti_am335x_tscadc, rts5249, rtsx_gops, rtsx_pcr,
rtc-s5m, sec-core, max77693, menelaus,
wm5102-tables
- Trivial fixups; rtsx_pci, da9150-core, sec-core, max7769, max77693,
mc13xxx-core, dln2, hi6421-pmic-core, rk808, twl4030-power,
lpc_ich, menelaus, twl6040
- Update register/address values; rts5227, rts5249
- DT and/or binding document fixups; arizona, da9150, mt6397, axp20x,
qcom-rpm, qcom-spmi-pmic
- Couple of trivial core Kconfig fixups
- Remove use of seq_printf return value; ab8500-debugfs
- Remove __exit markups; menelaus, tps65010
- Fix platform-device name collisions; mfd-core
New drivers/supported devices:
- Add support for wm8280/wm8281 into arizona
- Add support for COMe-cBL6 into kempld-core
- Add support for rts524a and rts525a into rts5249
- Add support for ipq8064 into qcom_rpm
- Add support for extcon into axp20x
- New MediaTek MT6397 PMIC driver
- New Maxim MAX77843 PMIC dirver
- New Intel Quark X1000 I2C-GPIO driver
- New Skyworks SKY81452 driver"
* tag 'mfd-for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (76 commits)
mfd: sec: Fix RTC alarm interrupt number on S2MPS11
mfd: wm5102: Remove registers for output 3R from readable list
mfd: tps65010: Remove incorrect __exit markups
mfd: devicetree: bindings: Add Qualcomm RPM regulator subnodes
mfd: axp20x: Add support for extcon cell
mfd: lpc_ich: Sort IDs
mfd: twl6040: Remove wrong and unneeded "platform:twl6040" modalias
mfd: qcom-spmi-pmic: Add specific compatible strings for Qualcomm's SPMI PMIC's
mfd: axp20x: Fix duplicate const for model names
mfd: menelaus: Use macro for magic number
mfd: menelaus: Drop support for SW controller VCORE
mfd: menelaus: Delete omap_has_menelaus
mfd: arizona: Correct type of gpio_defaults
mfd: lpc_ich: Sort IDs
mfd: Fix a typo in Kconfig
mfd: qcom_rpm: Add support for IPQ8064
mfd: devicetree: qcom_rpm: Document IPQ8064 resources
mfd: core: Fix platform-device name collisions
mfd: intel_quark_i2c_gpio: Don't crash if !DMI
dt-bindings: Add vendor-prefix for X-Powers
...
|
||
Russell King
|
4b2f883847 | Merge branch 'devel-stable' into for-next | ||
|
Linus Torvalds
|
b79013b244 |
Staging driver patches for 4.1-rc1
Here's the big staging driver patchset for 4.1-rc1. There's a lot of patches here, the Outreachy application period happened during this development cycle, so that means that there was a lot of cleanup patches accepted. Other than the normal coding style and sparse fixes here, there are some driver updates and work toward making some of the drivers into "mergable" shape (like the Unisys drivers.) All of these have been in linux-next for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEABECAAYFAlUsIA0ACgkQMUfUDdst+ylHuACgm8QZ9S6lk45/Qd9YeR3NSDaS upoAn3gVAaHnuxkW3anivuwOcirgCp3l =7VHU -----END PGP SIGNATURE----- Merge tag 'staging-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here's the big staging driver patchset for 4.1-rc1. There's a lot of patches here, the Outreachy application period happened during this development cycle, so that means that there was a lot of cleanup patches accepted. Other than the normal coding style and sparse fixes here, there are some driver updates and work toward making some of the drivers into "mergable" shape (like the Unisys drivers.) All of these have been in linux-next for a while" * tag 'staging-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1214 commits) staging: lustre: orthography & coding style staging: lustre: lnet: lnet: fix error return code staging: lustre: fix sparse warning Revert "Staging: sm750fb: Fix C99 Comments" Staging: rtl8192u: use correct array for debug output staging: rtl8192e: Remove dead code staging: rtl8192e: Comment cleanup (style/format) staging: rtl8192e: Fix indentation in rtllib_rx_auth_resp() staging: rtl8192e: Decrease nesting of rtllib_rx_auth_resp() staging: rtl8192e: Divide rtllib_rx_auth() staging: rtl8192e: Fix PRINTK_WITHOUT_KERN_LEVEL warnings staging: rtl8192e: Fix DO_WHILE_MACRO_WITH_TRAILING_SEMICOLON warning staging: rtl8192e: Fix BRACES warning staging: rtl8192e: Fix LINE_CONTINUATIONS warning staging: rtl8192e: Fix UNNECESSARY_PARENTHESES warnings staging: rtl8192e: remove unused EXPORT_SYMBOL_RSL macro staging: rtl8192e: Fix RETURN_VOID warnings staging: rtl8192e: Fix UNNECESSARY_ELSE warning staging: rtl8723au: Remove unneeded comments staging: rtl8723au: Use __func__ in trace logs ... |
||
|
Linus Torvalds
|
42e3a58b02 |
USB patches for 4.1-rc1
Here's the big USB (and PHY) driver patchset for 4.1-rc1. Everything here has been in linux-next, and the full details are below in the shortlog. Nothing major, just the normal round of new drivers,api updates, and other changes, mostly in the USB gadget area, as usual. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEABECAAYFAlUsHXYACgkQMUfUDdst+ykGvwCfbI3z0VYJqyvPi7pbn+jtGouQ E7MAoICdP90ofZfyzQzXy+2xKTTCiP5L =jSjh -----END PGP SIGNATURE----- Merge tag 'usb-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB driver updates from Greg KH: "Here's the big USB (and PHY) driver patchset for 4.1-rc1. Everything here has been in linux-next, and the full details are below in the shortlog. Nothing major, just the normal round of new drivers,api updates, and other changes, mostly in the USB gadget area, as usual" * tag 'usb-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (252 commits) drivers/usb/core: devio.c: Removed an uneeded space before tab usb: dwc2: host: sleep USB_RESUME_TIMEOUT during resume usb: chipidea: debug: add low power mode check before print registers usb: chipidea: udc: bypass pullup DP when gadget connect in OTG fsm mode usb: core: hub: use new USB_RESUME_TIMEOUT usb: isp1760: hcd: use new USB_RESUME_TIMEOUT usb: dwc2: hcd: use new USB_RESUME_TIMEOUT usb: host: sl811: use new USB_RESUME_TIMEOUT usb: host: r8a66597: use new USB_RESUME_TIMEOUT usb: host: oxu210hp: use new USB_RESUME_TIMEOUT usb: host: fusbh200: use new USB_RESUME_TIMEOUT usb: host: fotg210: use new USB_RESUME_TIMEOUT usb: host: isp116x: use new USB_RESUME_TIMEOUT usb: musb: use new USB_RESUME_TIMEOUT usb: host: uhci: use new USB_RESUME_TIMEOUT usb: host: ehci: use new USB_RESUME_TIMEOUT usb: host: xhci: use new USB_RESUME_TIMEOUT usb: define a generic USB_RESUME_TIMEOUT macro usb: musb: dsps: fix build on i386 when COMPILE_TEST is set ehci-hub: use USB_DT_HUB ... |
||
|
Linus Torvalds
|
a1480a166d |
Merge branch 'for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata updates from Tejun Heo: - Hannes's patchset implements support for better error reporting introduced by the new ATA command spec. - the deperecated pci_ dma API usages have been replaced by dma_ ones. - a bunch of hardware specific updates and some cleanups. * 'for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ata: remove deprecated use of pci api ahci: st: st_configure_oob must be called after IP is clocked. ahci: st: Update the ahci_st DT documentation ahci: st: Update the DT example for how to obtain the PHY. sata_dwc_460ex: indent an if statement libata: Add tracepoints libata-eh: Set 'information' field for autosense libata: Implement support for sense data reporting libata: Implement NCQ autosense libata: use status bit definitions in ata_dump_status() ide,ata: Rename ATA_IDX to ATA_SENSE libata: whitespace fixes in ata_to_sense_error() libata: whitespace cleanup in ata_get_cmd_descript() libata: use READ_LOG_DMA_EXT libata: remove ATA_FLAG_LOWTAG sata_dwc_460ex: re-use hsdev->dev instead of dwc_dev sata_dwc_460ex: move to generic DMA driver sata_dwc_460ex: join messages back sata: xgene: add ACPI support for APM X-Gene SATA ports ata: sata_mv: add proper definitions for LP_PHY_CTL register values |
||
|
Linus Torvalds
|
8954672d86 |
Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq core updates from Thomas Gleixner:
"Managerial summary:
Core code:
- final removal of IRQF_DISABLED
- new state save/restore functions for virtualization support
- wakeup support for stacked irqdomains
- new function to solve the netpoll synchronization problem
irqchips:
- new driver for STi based devices
- new driver for Vybrid MSCM
- massive cleanup of the GIC driver by moving the GIC-addons to
stacked irqdomains
- the usual pile of fixes and updates to the various chip drivers"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
irqchip: GICv3: Add support for irq_[get, set]_irqchip_state()
irqchip: GIC: Add support for irq_[get, set]_irqchip_state()
genirq: Allow the irqchip state of an IRQ to be save/restored
genirq: MSI: Fix freeing of unallocated MSI
irqchip: renesas-irqc: Add wake-up support
irqchip: armada-370-xp: Allow using wakeup source
irqchip: mips-gic: Add new functions to start/stop the GIC counter
irqchip: tegra: Add Tegra210 support
irqchip: digicolor: Move digicolor_set_gc to init section
irqchip: renesas-irqc: Add functional clock to bindings
irqchip: renesas-irqc: Add minimal runtime PM support
irqchip: renesas-irqc: Add more register documentation
DT: exynos: update PMU binding
ARM: exynos4/5: convert pmu wakeup to stacked domains
irqchip: gic: Don't complain in gic_get_cpumask() if UP system
ARM: zynq: switch from gic_arch_extn to gic_set_irqchip_flags
ARM: ux500: switch from gic_arch_extn to gic_set_irqchip_flags
ARM: shmobile: remove use of gic_arch_extn.irq_set_wake
irqchip: gic: Add an entry point to set up irqchip flags
ARM: omap: convert wakeupgen to stacked domains
...
|
||
|
Linus Torvalds
|
3be1b98e07 |
PCI changes for the v4.1 merge window:
Enumeration
- Read capability list as dwords, not bytes (Sean O. Stalley)
Resource management
- Don't check for PNP overlaps with unassigned PCI BARs (Bjorn Helgaas)
- Mark invalid BARs as unassigned (Bjorn Helgaas)
- Show driver, BAR#, and resource on pci_ioremap_bar() failure (Bjorn Helgaas)
- Fail pci_ioremap_bar() on unassigned resources (Bjorn Helgaas)
- Assign resources before drivers claim devices (Yijing Wang)
- Claim bus resources before pci_bus_add_devices() (Yijing Wang)
Power management
- Optimize device state transition delays (Aaron Lu)
- Don't clear ASPM bits when the FADT declares it's unsupported (Matthew Garrett)
Virtualization
- Add ACS quirks for Intel 1G NICs (Alex Williamson)
IOMMU
- Add ptr to OF node arg to of_iommu_configure() (Murali Karicheri)
- Move of_dma_configure() to device.c to help re-use (Murali Karicheri)
- Fix size when dma-range is not used (Murali Karicheri)
- Add helper functions pci_get[put]_host_bridge_device() (Murali Karicheri)
- Add of_pci_dma_configure() to update DMA configuration (Murali Karicheri)
- Update DMA configuration from DT (Murali Karicheri)
- dma-mapping: limit IOMMU mapping size (Murali Karicheri)
- Calculate device DMA masks based on DT dma-range size (Murali Karicheri)
ARM Versatile host bridge driver
- Check for devm_ioremap_resource() failures (Jisheng Zhang)
Broadcom iProc host bridge driver
- Add Broadcom iProc PCIe driver (Ray Jui)
Marvell MVEBU host bridge driver
- Add suspend/resume support (Thomas Petazzoni)
Renesas R-Car host bridge driver
- Fix position of MSI enable bit (Nobuhiro Iwamatsu)
- Write zeroes to reserved PCIEPARL bits (Nobuhiro Iwamatsu)
- Change PCIEPARL and PCIEPARH to PCIEPALR and PCIEPAUR (Nobuhiro Iwamatsu)
- Verify that mem_res is 64K-aligned (Nobuhiro Iwamatsu)
Samsung Exynos host bridge driver
- Fix INTx enablement statement termination error (Jaehoon Chung)
Miscellaneous
- Make a shareable UUID for PCI firmware ACPI _DSM (Aaron Lu)
- Clarify policy for vendor IDs in pci.txt (Michael S. Tsirkin)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=vEVs
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI changes from Bjorn Helgaas:
"Enumeration
- Read capability list as dwords, not bytes (Sean O. Stalley)
Resource management
- Don't check for PNP overlaps with unassigned PCI BARs (Bjorn Helgaas)
- Mark invalid BARs as unassigned (Bjorn Helgaas)
- Show driver, BAR#, and resource on pci_ioremap_bar() failure (Bjorn Helgaas)
- Fail pci_ioremap_bar() on unassigned resources (Bjorn Helgaas)
- Assign resources before drivers claim devices (Yijing Wang)
- Claim bus resources before pci_bus_add_devices() (Yijing Wang)
Power management
- Optimize device state transition delays (Aaron Lu)
- Don't clear ASPM bits when the FADT declares it's unsupported (Matthew Garrett)
Virtualization
- Add ACS quirks for Intel 1G NICs (Alex Williamson)
IOMMU
- Add ptr to OF node arg to of_iommu_configure() (Murali Karicheri)
- Move of_dma_configure() to device.c to help re-use (Murali Karicheri)
- Fix size when dma-range is not used (Murali Karicheri)
- Add helper functions pci_get[put]_host_bridge_device() (Murali Karicheri)
- Add of_pci_dma_configure() to update DMA configuration (Murali Karicheri)
- Update DMA configuration from DT (Murali Karicheri)
- dma-mapping: limit IOMMU mapping size (Murali Karicheri)
- Calculate device DMA masks based on DT dma-range size (Murali Karicheri)
ARM Versatile host bridge driver
- Check for devm_ioremap_resource() failures (Jisheng Zhang)
Broadcom iProc host bridge driver
- Add Broadcom iProc PCIe driver (Ray Jui)
Marvell MVEBU host bridge driver
- Add suspend/resume support (Thomas Petazzoni)
Renesas R-Car host bridge driver
- Fix position of MSI enable bit (Nobuhiro Iwamatsu)
- Write zeroes to reserved PCIEPARL bits (Nobuhiro Iwamatsu)
- Change PCIEPARL and PCIEPARH to PCIEPALR and PCIEPAUR (Nobuhiro Iwamatsu)
- Verify that mem_res is 64K-aligned (Nobuhiro Iwamatsu)
Samsung Exynos host bridge driver
- Fix INTx enablement statement termination error (Jaehoon Chung)
Miscellaneous
- Make a shareable UUID for PCI firmware ACPI _DSM (Aaron Lu)
- Clarify policy for vendor IDs in pci.txt (Michael S. Tsirkin)"
* tag 'pci-v4.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (36 commits)
PCI: Read capability list as dwords, not bytes
PCI: layerscape: Simplify platform_get_resource_byname() failure checking
PCI: keystone: Don't dereference possible NULL pointer
PCI: versatile: Check for devm_ioremap_resource() failures
PCI: Don't clear ASPM bits when the FADT declares it's unsupported
PCI: Clarify policy for vendor IDs in pci.txt
PCI/ACPI: Optimize device state transition delays
PCI: Export pci_find_host_bridge() for use inside PCI core
PCI: Make a shareable UUID for PCI firmware ACPI _DSM
PCI: Fix typo in Thunderbolt kernel message
PCI: exynos: Fix INTx enablement statement termination error
PCI: iproc: Add Broadcom iProc PCIe support
PCI: iproc: Add DT docs for Broadcom iProc PCIe driver
PCI: Export symbols required for loadable host driver modules
PCI: Add ACS quirks for Intel 1G NICs
PCI: mvebu: Add suspend/resume support
PCI: Cleanup control flow
sparc/PCI: Claim bus resources before pci_bus_add_devices()
PCI: Assign resources before drivers claim devices (pci_scan_root_bus())
PCI: Fail pci_ioremap_bar() on unassigned resources
...
|
||
|
Linus Torvalds
|
a21c1ea656 |
power supply and reset changes for the v4.1 series
* new API for safe access of power supply function attrs
* devres support for power supply (un)registration
* new drivers / chips
- generic syscon based poweroff driver
- iio & charger driver for da9150
- fuel gauge driver for axp288
- bq27x00: add support for bq27510
- bq2415x: add support for bq24157s
* twl4030-madc-battery: convert to iio consumer
* misc fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=WbZu
-----END PGP SIGNATURE-----
Merge tag 'for-v4.1' of git://git.infradead.org/battery-2.6
Pull power supply and reset changes from Sebastian Reichel:
- new API for safe access of power supply function attrs
- devres support for power supply (un)registration
- new drivers / chips:
- generic syscon based poweroff driver
- iio & charger driver for da9150
- fuel gauge driver for axp288
- bq27x00: add support for bq27510
- bq2415x: add support for bq24157s
- twl4030-madc-battery: convert to iio consumer
- misc fixes
* tag 'for-v4.1' of git://git.infradead.org/battery-2.6: (66 commits)
power: twl4030_madc_battery: Add missing MODULE_ALIAS
power: twl4030-madc-battery: Convert to iio consumer.
dt: power: Add docs for generic SYSCON poweroff driver.
power: reset: Add generic SYSCON register mapped poweroff.
power: max17042_battery: add missed blank
power: max17042_battery: Use reg type instead of chip type
power/reset: at91: big endian fixes for atsama5d3x
power_supply: charger-manager: Fix dereferencing of ERR_PTR
HID: input: Fix NULL pointer dereference when power_supply_register fails
power: constify of_device_id array
power/reset/rmobile-reset.c: Fix !HAS_IOMEM build
power_supply: 88pm860x_charger: Fix possible NULL pointer dereference and use of initialized variable
arm: mach-pxa: Decrement the power supply's device reference counter
mfd: ab8500: Decrement the power supply's device reference counter
power_supply: bq2415x_charger: Decrement the power supply's device reference counter
power_supply: 88pm860x_charger: Decrement the power supply's device reference counter
x86/olpc/xo15/sci: Use newly added power_supply_put API
x86/olpc/xo1/sci: Use newly added power_supply_put API
power_supply: charger-manager: Decrement the power supply's device reference counter
power_supply: Increment power supply use counter when obtaining references
...
|
||
|
Linus Torvalds
|
d700b05671 |
regulator: Updates for v4.1
Another release, another set of regulator updates. Not much of it is
showing up in the code yet but there's been a lot of discussion going on
about how to enhance the regulator API to work better with modern SoCs
which have a microcontroller sitting between Linux and the hardware.
I'm hopeful that'll start to come through into mainline for v4.2 but
it's not quite there for v4.1 - what we do have (along with the usual
small updates is) is:
- Work from Bjorn Andersson on refactoring the configuration of
regulator loading interfaces to be useful for use with
microcontrollers, the existing interfaces were never actually useful
for anything as-is since nobody was willing to put enough data into
public code.
- A summary tree display in debugfs from Heiko Stübner.
- Support for act6000 regulators.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVK+w1AAoJECTWi3JdVIfQeg0H/2ckXZEQWH/yzAz7JgAoSmVr
+y8pvfNLOyOVVulFI0QBOaCAoyJNXNPNqDrkYaTykMIwX4y+weoDqfH/LMiGpnXl
D3aAgdLPSWLTUMteCs9KIHesnOdjKclZUjnbskJgnmeMCW23WcX9T1lBVoLBVdlo
p+oe287rhEwF6j2t63aLwFv8QGpamgVQ/8mXXs8EK7L5E3OO262SwLaXRBAtWk30
Eb68qXrbbkrDunEL6Hjggj5pFi93M4eNfQHpzVmjidvwz1g4JpLtWHW4XpQlXoHJ
G2rlVwNFsyedT1MX2ByKhrIPu5kq5pt0/rjear34G3vuEnQm7vR3aW/38AOxffs=
=t8gT
-----END PGP SIGNATURE-----
Merge tag 'regulator-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"Another release, another set of regulator updates. Not much of it is
showing up in the code yet but there's been a lot of discussion going
on about how to enhance the regulator API to work better with modern
SoCs which have a microcontroller sitting between Linux and the
hardware.
I'm hopeful that'll start to come through into mainline for v4.2 but
it's not quite there for v4.1 - what we do have (along with the usual
small updates is) is:
- work from Bjorn Andersson on refactoring the configuration of
regulator loading interfaces to be useful for use with
microcontrollers, the existing interfaces were never actually
useful for anything as-is since nobody was willing to put enough
data into public code.
- a summary tree display in debugfs from Heiko Stübner.
- support for act6000 regulators"
* tag 'regulator-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (34 commits)
regulator: max8660: Handle empty regulator data
regulator: output current-limit for all regulators in summary
regulator: add a summary tree in debugfs
regulator: qcom: Tidy up probe()
regulator: qcom: Rework to single platform device
regulator: qcom: Refactor of-parsing code
regulator: qcom: Don't enable DRMS in driver
regulator: max8660: fix assignment of pdata to data that becomes dead
regulator: Defer lookup of supply to regulator_get
mfd: max77693: Remove unused structures
regulator: max77693: Let core parse DT and drop board files support
regulator: Ensure unique regulator debugfs directory names
regulator: stw481x: Remove unused fields from struct stw481x
regulator: palmas: Add has_regen3 check for TPS659038
regulator: constify of_device_id array
regulator: fixes for regulator_set_optimum_mode name change
regulator: Drop temporary regulator_set_optimum_mode wrapper
usb: phy: phy-msm-usb: Rename regulator_set_optimum_mode
usb: phy: ab8500-usb: Rename regulator_set_optimum_mode
ufs: Rename of regulator_set_optimum_mode
...
|
||
|
Linus Torvalds
|
0055dc5b23 |
spi: Updates for v4.1
Only one framework update this time around, a change from Lars-Peter to
move full to pm_ops and remove the legacy bus PM ops. Otherwise it's
all driver updates:
- Make the spidev driver complain loudly if registered as spidev with
DT rather than with a compatible string, hopefully helping people
avoid making that mistake.
- Error handling and robustness fixes for the Designware and Intel MID
drivers from Andy Shevchenko.
- Substantial performance improvements for the Raspberry Pi driver from
Martin Sperl.
- Several new features for spidev_test from Adrian Remonda and Ian
Abbott.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVK8JoAAoJECTWi3JdVIfQEl0H/iQU06k/sFtfQYwsj/LJHKTe
L3SOfBoEuS3l9UudCpVspGwikcrbdTtziO/VY0oCPMdjovHrXFsaoT902LGeDsTn
oSnxXojSQOpet7at2tEYk7O/tdyykKR6fU2t4GJBYRreBvvQCG8xsrrAk/ahHTsn
LC4x49zwgvm4R24VPA37AhdDvBUxFWuJC3uQhf9cc59/DqPKaC5cm2L6mA6m5Vwk
W7t6kodr8wURp+Yc+VAvR3u4tRkCJUmgSO54ysGNuToR5brRTyEnBCed2GcqoDjQ
OFQDgHuEP/YPQOojxGJ+RMW5VpKXmaXYotvUhTdLRSevVmVNQfa4zUPtTnb13kA=
=+TxD
-----END PGP SIGNATURE-----
Merge tag 'spi-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"Only one framework update this time around, a change from Lars-Peter
to move full to pm_ops and remove the legacy bus PM ops. Otherwise
it's all driver updates:
- make the spidev driver complain loudly if registered as spidev with
DT rather than with a compatible string, hopefully helping people
avoid making that mistake.
- error handling and robustness fixes for the Designware and Intel
MID drivers from Andy Shevchenko.
- substantial performance improvements for the Raspberry Pi driver
from Martin Sperl.
- several new features for spidev_test from Adrian Remonda and Ian
Abbott"
* tag 'spi-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (75 commits)
spi: bcm2835: enabling polling mode for transfers shorter than 30us
spi: bcm2835: transform native-cs to gpio-cs on first spi_setup
spi: img-spfi: Control CS lines with GPIO
spi: img-spfi: Reset controller after each message
spi: img-spfi: Implement a handle_err() callback
spi: img-spfi: Setup TRANSACTION register before CONTROL register
spi: Make master->handle_err() callback optional to avoid crashes
spi: img-spfi: Limit bit clock to 1/4th of input clock
spi: img-spfi: Implement a prepare_message() callback
spi: fsl-dspi: Add ~50ns delay between cs and sck
spi: fsl-dspi: Add cs-sck delays
spi: fsl-dspi: Fix clock rate scale values
spi: signedness bug in qspi_trigger_transfer_out_int()
spi: imx: read back the RX/TX watermark levels earlier
spi: spi-bfin5xx: Initialize cr_width in bfin_spi_pump_transfers()
spi: bitbang: only toggle bitchanges
spi: pxa2xx: missing break in pxa2xx_ssp_get_clk_div()
spi: fsl-dspi: Fix clock rate scale values
spi: Using Trigger number to transmit/receive data
spi: bcm2835: fill FIFO before enabling interrupts to reduce interrupts/message
...
|
||
|
Linus Torvalds
|
8d9095c667 |
MMC core:
- Add support for marking HPI as broken through devicetree - Enable runtime PM management of host devices - Remove the ->enable|disable() callbacks - Restructure code and cleanups - Refreshed some of the MMC sections in MAINTAINERS MMC host: - dw_mmc: HS400 mode support - dw_mmc: Add the cmd11 timer to detect a timeout - dw_mmc: Endian agnostic IO accessors - dw_mmc: Bugfixes - sh_mmcif: Add exclusion between cmd and interrupt - omap_hsmmc: Hibernation support - omap_hsmmc: Rework and simplify cover/card detect - omap_hsmmc: Stop using ->enable|disable() callbacks - atmel-mci: Endian agnostic IO - sunxi: Enable MMC_CAP_SDIO_IRQ - sdhci-st: Add support for the stih407 family silicon - sdhci-st: UHS card support in SDR104 mode - sdhci-st: HS200 mode support - sdhci-esdhc-imx: Use common mmc DT parser - sdhci-of-arasan: Use common mmc DT parser - sdhci-iproc: Add new driver for Broadcom IPROC SDHCI controller - sdhci-tegra: Convert to GPIO descriptors - sdhci-tegra: Optmize write_w path for tegra114 and later - sdhci-sirf: Update tuning procedure - sdhci: Fix card presence logic - sdhci: Cleanups and consolidation -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJVK362AAoJEP4mhCVzWIwpcRUP/RrapvmsBJ9eJy4XJXpC/D+C ZfLcyA/aVOr/U7z8cGfBDVxZLi8j7Nqx1wSA7dahSXTPqsRcQEbxAdYdjJ0jI9Ew XrNh2bYBV0AcGP3YdCcHDqZxVPetcB3HbgsE5WgUcnmwmuD4TXP62TDPk1jUCaya KfLW9EvGLICu+W7T/Q+Gv/Q4+zo7rfg0xZZEXkcSKN/zEssWG0wngkv7Him3eKn+ 4SveBzog3dOjS6p/S9KjT8qd89e13TsNR0DPuWCHyT/rj/KY+BqEm2qCueqaVOQ/ rPM1vsjapibtPif+jSorAVoW5+hUe/LnhnLXSH0DGXF6WFOAJqYtu9IqVva6UF4x fj8p7XspR4pjEDgJf8jjylhvdglX6/AzXv6XHL6aG5TKxBiAJsSeVe2waQ8+Mk7M bUp321exr27L5gBXzE09jFDR9IoJ+ungEKeoRNsRVHC6Eg1NkAhVP7d7TpW6W9tu V/Ncn3t/OeplKpD5JAya1DOGgLKD+K5x3e4HIp4ZDP+72arue8tnxZFSJr9vkkek u6x+lgZ7r1P1s66uKbFFZluZhVVSbWYKPMTQmFp5XeP36OgOIbAkaChKCxiwo2Ar lgOlB3ngNfl20swEAdrP4uGZjUHerrp8KIYIxVwDrf7Ec5wFe56hyFT7O9H8t1l1 Z28m9KkRWGjJ1k61pzw9 =mKlf -----END PGP SIGNATURE----- Merge tag 'mmc-v4.1' of git://git.linaro.org/people/ulf.hansson/mmc Pull MMC updates from Ulf Hansson: "MMC core: - Add support for marking HPI as broken through devicetree - Enable runtime PM management of host devices - Remove the ->enable|disable() callbacks - Restructure code and cleanups - Refreshed some of the MMC sections in MAINTAINERS MMC host: - dw_mmc: HS400 mode support - dw_mmc: Add the cmd11 timer to detect a timeout - dw_mmc: Endian agnostic IO accessors - dw_mmc: Bugfixes - sh_mmcif: Add exclusion between cmd and interrupt - omap_hsmmc: Hibernation support - omap_hsmmc: Rework and simplify cover/card detect - omap_hsmmc: Stop using ->enable|disable() callbacks - atmel-mci: Endian agnostic IO - sunxi: Enable MMC_CAP_SDIO_IRQ - sdhci-st: Add support for the stih407 family silicon - sdhci-st: UHS card support in SDR104 mode - sdhci-st: HS200 mode support - sdhci-esdhc-imx: Use common mmc DT parser - sdhci-of-arasan: Use common mmc DT parser - sdhci-iproc: Add new driver for Broadcom IPROC SDHCI controller - sdhci-tegra: Convert to GPIO descriptors - sdhci-tegra: Optmize write_w path for tegra114 and later - sdhci-sirf: Update tuning procedure - sdhci: Fix card presence logic - sdhci: Cleanups and consolidation" * tag 'mmc-v4.1' of git://git.linaro.org/people/ulf.hansson/mmc: (79 commits) mmc: sdhci-st: Update ST SDHCI binding documentation. mmc: sdhci-st: Update the quirks for this controller. mmc: sdhci-st: Add sdhci_st_set_uhs_signaling function. mmc: sdhci-st: Add st_mmcss_cconfig function to configure mmcss glue registers. mmc: sdhci-st: Add delay management functions for top registers (eMMC). mmc: sdhci-st: Add support for de-asserting reset signal and top regs resource mmc: sdhci-st: Add macros for register offsets and bitfields for mmcss glue regs mmc: sdhci-esdhc-imx: Call mmc_of_parse() mmc: dw_mmc: Add locking around cmd11 timer mmc: dw_mmc: Add a return in an unexpected cmd11 timeout mmc: dw_mmc: Increase cmd11 timeout to 500ms mmc: dw_mmc: fix fifo ordering in big endian mmc: dw_mmc: change idmac descriptor files to __le32 mmc: dw_mmc: make IO accessors endian agnostic mmc: core: Convert the error field in struct mmc_command|data into an int mmc: sdhci-of-arasan: Call OF parsing for MMC mmc: sdhci-pci: fix 64 BIT DMA quirks for rtsx mmc: Add support for marking hpi as broken through devicetree mmc: sdhci-tegra: convert to use GPIO descriptors mmc: omap_hsmmc: use generic slot-gpio isr to manage card detect pin ... |
||
|
Linus Torvalds
|
4b5ca74113 |
- Support for new chips
- Add support for IT8620E, IT8781F, IT8786E, and IT8790E to it87 driver
- Add driver for NCT7904
- Functional improvements
- Support for new devicetree structure in ibmpowernv driver
- Register pwm-fan and gpio-fan drivers as thermal cooling devices
- Various minor cleanup and improvements to it87, nct6775, jc42,
ibmpex, and coretemp drivers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=RD/q
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-linus-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"Support for new chips:
- add support for IT8620E, IT8781F, IT8786E, and IT8790E to it87
driver
- add driver for NCT7904
Functional improvements:
- support for new devicetree structure in ibmpowernv driver
- register pwm-fan and gpio-fan drivers as thermal cooling devices
- various minor cleanup and improvements to it87, nct6775, jc42,
ibmpex, and coretemp drivers"
* tag 'hwmon-for-linus-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (43 commits)
hwmon: (pwm-fan) Update the duty cycle inorder to control the pwm-fan
hwmon: (it87) Use feature macros on sio_data
hwmon: (ibmpowernv) Fix build error seen for some configurations
hwmon: (gpio-fan) Move the thermal registration after registration is complete
hwmon: (ibmpowernv) pretty print labels
hwmon: (ibmpowernv) add a label attribute
hwmon: (ibmpowernv) add support for the new device tree
hwmon: (ibmpowernv) add a helper routine create_hwmon_attr
hwmon: (it87) Add support for 6th fan of IT8620E
hwmon: (it87) Add support for IT8620E
hwmon: (it87) Add support for IT8790E
hwmon: (it87) Introduce feature flag to reflect internal in7 sensor
hwmon: (it87) Introduce configuration field for chip suffix
hwmon: (it87) Fix PWM frequency display for chips with newer PWM control
hwmon: (it87) Fix pwm sysfs attribute removal
hwmon: (ibmpowernv) do not use the OPAL index for hwmon attribute names
hwmon: (ibmpowernv) change create_hwmon_attr_name() prototype
hwmon: (ibmpowernv) add a convert_opal_attr_name() routine
hwmon: (ibmpowernv) add a get_sensor_type() routine
hwmon: (ibmpowernv) replace AMBIENT_TEMP by TEMP
...
|
||
Mark Brown
|
7667428f80 | Merge remote-tracking branches 'asoc/topic/wm2200', 'asoc/topic/wm5100', 'asoc/topic/wm8731', 'asoc/topic/wm8804' and 'asoc/topic/wm8996' into asoc-next | ||
|
Mark Brown
|
1fa1e0731d | Merge remote-tracking branches 'asoc/topic/omap', 'asoc/topic/qcom', 'asoc/topic/rcar' and 'asoc/topic/rt286' into asoc-next | ||
|
Mark Brown
|
e1f059937a | Merge remote-tracking branches 'asoc/topic/link-param', 'asoc/topic/max98090', 'asoc/topic/max98925' and 'asoc/topic/nuc900' into asoc-next | ||
|
Mark Brown
|
626761ad02 | Merge remote-tracking branches 'asoc/topic/jack', 'asoc/topic/jz4740' and 'asoc/topic/kirkwood' into asoc-next | ||
|
Mark Brown
|
89a88dd3d6 |
ASoC: Changes for v4.1
A selection of changes for v4.1 so far. The main things are: - Move of jack registration to the card where it belongs. - Support for DAPM routes specified by both the machine driver and DT. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJU960DAAoJECTWi3JdVIfQkKIH/RDvxRn8dvKOPF5U9Uix3chH JWKkzqfsMP0EpmQTzCQPp0ShAyYcWSbYsopicynPxUem5vS4Z8+UmOgEEgkj59pK USbF6v1jCQXA6BcbKyUcRRBD9FtRkfVDc7mYbRs2CcwQz2CGCgee41cvPM+2BT+z QdNC9UJARSweGvE1IUJSfpfYOly+BJ2s0/28RaQ0PGt+I0auoYx7IMFgMSDjv2p6 PY0kyQiwm3Kyj2uNXPZ5gEuPxlw/t8n4fbQNrBYAvxzN+EF5NrGdKE3N7MI1xRV/ EkFhzy+uM3X9c37tb2lT2fgPFlBc9rgPuLPSyoQ6nxa5ghCqAlgRhzpxRem8hhU= =VlCw -----END PGP SIGNATURE----- Merge tag 'asoc-v4.1' into asoc-next ASoC: Changes for v4.1 A selection of changes for v4.1 so far. The main things are: - Move of jack registration to the card where it belongs. - Support for DAPM routes specified by both the machine driver and DT. # gpg: Signature made Thu 05 Mar 2015 01:10:27 GMT using RSA key ID 5D5487D0 # gpg: WARNING: digest algorithm MD5 is deprecated # gpg: please see https://gnupg.org/faq/weak-digest-algos.html for more information # gpg: Oops: keyid_from_fingerprint: no pubkey # gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>" # gpg: aka "Mark Brown <broonie@debian.org>" # gpg: aka "Mark Brown <broonie@kernel.org>" # gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>" # gpg: aka "Mark Brown <broonie@linaro.org>" # gpg: aka "Mark Brown <Mark.Brown@linaro.org>" |
||
|
Linus Torvalds
|
54d8ccc302 |
Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal
Pull last minute thermal-SoC management fixes from Eduardo Valentin: "Specifics: - Minor fixes on ST and RCAR thermal drivers. - Avoid flooding kernel log when driver returns -EAGAIN. Note: I am sending this pull on Rui's behalf while he fixes issues in his Linux box" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: drivers: thermal: st: remove several sparse warnings thermal: constify of_device_id array thermal: Do not log an error if thermal_zone_get_temp returns -EAGAIN thermal: rcar: Fix typo in r8a73a4 SoC name |
||
|
Mark Brown
|
165f2288e1 | Merge remote-tracking branches 'spi/topic/qup', 'spi/topic/rockchip', 'spi/topic/rspi', 'spi/topic/s3c64xx' and 'spi/topic/sc18is602' into spi-next | ||
|
Mark Brown
|
35fbf8452c | Merge remote-tracking branches 'spi/topic/fsl-cspi', 'spi/topic/fsl-dspi', 'spi/topic/imx' and 'spi/topic/of-id' into spi-next | ||
Thomas Gleixner
|
b7dccbea6b |
irqchip core change for v4.1 (round 3)
- Purge the gic_arch_extn hacks and abuse by using the new stacked domains
NOTE: Due to the nature of these changes, patches crossing subsystems have
been kept together in their own branches.
- tegra
- Handle the LIC properly
- omap
- Convert crossbar to stacked domains
- kill arm,routable-irqs in GIC binding
- exynos
- Convert PMU wakeup to stacked domains
- shmobile, ux500, zynq (irq_set_wake branch)
- Switch from abusing gic_arch_extn to using gic_set_irqchip_flags
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=IPgJ
-----END PGP SIGNATURE-----
Merge tag 'irqchip-core-4.1-3' of git://git.infradead.org/users/jcooper/linux into irq/core
irqchip core change for v4.1 (round 3) from Jason Cooper
Purge the gic_arch_extn hacks and abuse by using the new stacked domains
NOTE: Due to the nature of these changes, patches crossing subsystems have
been kept together in their own branches.
- tegra
- Handle the LIC properly
- omap
- Convert crossbar to stacked domains
- kill arm,routable-irqs in GIC binding
- exynos
- Convert PMU wakeup to stacked domains
- shmobile, ux500, zynq (irq_set_wake branch)
- Switch from abusing gic_arch_extn to using gic_set_irqchip_flags
|
||
|
Thomas Gleixner
|
425b655ce4 |
irqchip core changes for v4.1 (round 2)
- gic
- Tolerate uni-processor systems better in gic_get_cpumask()
- mvebu
- Handle per-cpu interrupts properly
- Enable PMU interrupts
- Enable wakeup source
- vybrid
- Add MSCM interrupt router
- renesas
- Add PM and wakeup support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=TUXq
-----END PGP SIGNATURE-----
Merge tag 'irqchip-core-4.1-2' of git://git.infradead.org/users/jcooper/linux into irq/core
irqchip core changes for v4.1 (round 2) from Jason Cooper
- gic
- Tolerate uni-processor systems better in gic_get_cpumask()
- mvebu
- Handle per-cpu interrupts properly
- Enable PMU interrupts
- Enable wakeup source
- vybrid
- Add MSCM interrupt router
- renesas
- Add PM and wakeup support
|
||
Jason Cooper
|
fb414e908b | Merge branch 'irqchip/stacked-exynos' into irqchip/core | ||
|
Jason Cooper
|
07c523f149 | Merge branch 'irqchip/stacked-omap' into irqchip/core | ||
|
Jason Cooper
|
37b25fffd1 | Merge branch 'irqchip/stacked-tegra' into irqchip/core | ||
|
Mark Brown
|
e5073849f9 | Merge remote-tracking branches 'regulator/topic/act8865', 'regulator/topic/arizona-ldo1', 'regulator/topic/arizona-micsupp' and 'regulator/topic/da9211' into regulator-next | ||
Subhendu Sekhar Behera
|
2bbd681ba2 |
i2c: xlp9xx: Driver for Netlogic XLP9XX/5XX I2C controller
Add an I2C bus driver i2c-xlp9xx.c to support the I2C block in the XLP9xx/XLP5xx MIPS SoC. Update Kconfig and Makefile to add the CONFIG_I2C_XLP9XX option. Signed-off-by: Subhendu Sekhar Behera <sbehera@broadcom.com> Signed-off-by: Jayachandran C <jchandra@broadcom.com> Reviewed-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> |
||
|
Subhendu Sekhar Behera
|
85e4564ab2 |
of: Add vendor prefix 'netlogic'
Add vendor name "netlogic" in vendor-prefixes.txt, which will be used for the Netlogic XLP and XLPII MIPS SoCs. These processors were from NetLogic Microsystems that is now a part of Broadcom Corporation. Signed-off-by: Subhendu Sekhar Behera <sbehera@broadcom.com> Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> |
||
Grygorii Strashko
|
7ef97e9a31 |
i2c: davinci: use ICPFUNC to toggle I2C as gpio for bus recovery
Having a board where the I2C bus locks up occasionally made it clear that the bus recovery in the i2c-davinci driver will only work on some boards, because on regular boards, this will only toggle GPIO lines that aren't muxed to the actual pins. The I2C controller on SoCs like da850 (and da830), Keystone 2 has the built-in capability to bit-bang its lines by using the ICPFUNC registers of the i2c controller. Implement the suggested procedure by toggling SCL and checking SDA using the ICPFUNC registers of the I2C controller when present. Allow platforms to indicate the presence of the ICPFUNC registers with a has_pfunc platform data flag and add optional DT property "ti,has-pfunc" to indicate the same in DT. Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Tested-by: Michael Lawnick <michael.lawnick@nokia.com> Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Signed-off-by: Mike Looijmans <milo-software@users.sourceforge.net> [grygorii.strashko@ti.com: combined patches from Ben Gardiner and Mike Looijmans and reimplemented ICPFUNC bus recovery using I2C bus recovery infrastructure] Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> |
||
Bjorn Helgaas
|
4dd1f57956 |
Merge branches 'pci/host-exynos', 'pci/host-iproc', 'pci/host-keystone', 'pci/host-layerscape', 'pci/host-mvebu', 'pci/host-rcar' and 'pci/host-versatile' into next
* pci/host-exynos: PCI: exynos: Fix INTx enablement statement termination error * pci/host-iproc: PCI: iproc: Add Broadcom iProc PCIe support PCI: iproc: Add DT docs for Broadcom iProc PCIe driver PCI: Export symbols required for loadable host driver modules * pci/host-keystone: PCI: keystone: Don't dereference possible NULL pointer * pci/host-layerscape: PCI: layerscape: Simplify platform_get_resource_byname() failure checking * pci/host-mvebu: PCI: mvebu: Add suspend/resume support * pci/host-rcar: PCI: rcar: Verify that mem_res is 64K-aligned PCI: rcar: Change PCIEPARL and PCIEPARH to PCIEPALR and PCIEPAUR PCI: rcar: Write zeroes to reserved PCIEPARL bits PCI: rcar: Fix position of MSI enable bit * pci/host-versatile: PCI: versatile: Check for devm_ioremap_resource() failures |
||
Greg Kroah-Hartman
|
2aebe3f3b2 |
New Features
============ *) Add driver for USB PHYs on sun9i *) Add driver for USB PHY on dm816x *) Modified exynos5-usbdrd driver to add support for Exynos5433 SoC Fixes ===== *) Fix power_on/power_off failure paths in some drivers *) Make miphy365x use generic PHY type constants *) Fix build errors due to missing export symbols in qcom-ufs driver *) Make all the functions return proper error values Cleanups ======== *) use PTR_ERR_OR_ZERO to simplify code *) use devm_kcalloc instead of devm_kzalloc with multiply *) remove un-necessary ifdef CONFIG_OF -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJVHrrMAAoJEA5ceFyATYLZV8kP/074teM4HZMAqmUVRG+nRr8b Eb8QYOzpnazUKtUovMYePzLjIZ3kvlMepSVVZiZqP6Uc2s6bnhTUN758HZBTdMVO Cer63lcp5eM6yBSIL4kNo3+18ikql3LJK9kQZoLGszZmVJzwwqhL/cWxl8+WfZ+P U71ciL07xmQD1c1GbRsuDBykaDKnf4M9HVUzP9w/pFANKYWWHdR3bj53kz9W7bGm gF/6wVFfxkknPfQjlqo9VUoSPN3P+WIcoM2rPG1b1u2adAAKFSYvXX2eJKWZF6Cz L9IZn1bTB0tMkrbswpMRqPtKjfmGyi1Acx8jt8WVA5pjNZ4K2P+9T7vsWifEnYa/ BDYdJJRzZSL89m9zwEFvLF490pTJrk33eFbqzHDGmDcdtj8KY8XZ9Fp5R2Lmj26s mtST0Pi+j9SGg95KZBcXd2l1EJmdDutEYy7LgVvkLk4IFPfOyaAFEhSNW+Qi+Lh9 SkDqbZUrk9ZxzsWqYJW5LVbQlscJ2NzQuf5AgkrXsufXO0B8RAV5bt0f88ENmQsJ rbbbWIb/ljT6YbZqT8z2X8T0PNZBknSfepb5LO5QAZMMJJm2202TondsISytvC9U fS5sBIDzuiiMtOA9FwA5Yl1bPWq6QY4OwqIMX3LAs10ylJhbuqJ7nK5qH3O4bpk+ DzOCd1oLJhXjnOXIujz2 =0gB+ -----END PGP SIGNATURE----- Merge tag 'for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next Kishon writes: New Features ============ *) Add driver for USB PHYs on sun9i *) Add driver for USB PHY on dm816x *) Modified exynos5-usbdrd driver to add support for Exynos5433 SoC Fixes ===== *) Fix power_on/power_off failure paths in some drivers *) Make miphy365x use generic PHY type constants *) Fix build errors due to missing export symbols in qcom-ufs driver *) Make all the functions return proper error values Cleanups ======== *) use PTR_ERR_OR_ZERO to simplify code *) use devm_kcalloc instead of devm_kzalloc with multiply *) remove un-necessary ifdef CONFIG_OF |
||
Peter Griffin
|
69f0fb2a59 |
mmc: sdhci-st: Update ST SDHCI binding documentation.
This patch updates the binding information to reflect the extra dt options which are now supported by the sdhci-st.c driver which enable support for stih407 family silicon. STiH410 SoC and later support UHS modes for eMMC, so the driver now makes use of these common bindings. Examples are provided for both eMMC (which has additional bindings) and also sd slot for STiH407. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> |
||
Bjorn Andersson
|
8d2f1a9d36 |
mfd: devicetree: bindings: Add Qualcomm RPM regulator subnodes
Add the regulator subnodes to the Qualcomm RPM MFD device tree bindings. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
||
|
Thomas Gleixner
|
fdb7144ba3 |
irqchip core changes for v4.0
- STi
- New driver, irq-st
- Renesas
- Use u32 type for 32bit regs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=WGOO
-----END PGP SIGNATURE-----
Merge tag 'irqchip-core-4.0' of git://git.infradead.org/users/jcooper/linux into irq/core
irqchip core changes for v4.0 from Jason Cooper
- ST
- New driver, irq-st
- Renesas
- Use u32 type for 32bit regs
|
||
David S. Miller
|
82740b9ac2 |
NFC: 4.1 pull request
This is the NFC pull request for 4.1. This is a shorter one than usual, as the Intel Field Peak NFC driver could not make it in time. We have: - A new driver for NXP NCI based chipsets, like e.g. the NPC100 or the PN7150. It currently only supports an i2c physical layer, but could easily be extended to work on top of e.g. SPI. This driver also includes support for user space triggered firmware updates. - A few minor st21nfc[ab] fixes, cleanups, and comments improvements. - A pn533 error return fix. - A few NFC related logs formatting cleanups. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJVJV81AAoJEIqAPN1PVmxKM3sP/R6fKXMxtVxXsiPzBMk+SpBI onNXbCx27rp1lHTFznE16JAaaSfcQEwSQmYx7xa6KXqRYVlDfRfC+5R+rPGrCjfH kV/eLBNnYpmPw0ViVT7dsWK0b4me0k5pr9ki9mze3YxvuMbA5vdv0tvuRFz5IRF/ hl+WI5pntGuRtnIyBKIauAMylylUYVvCBGhmHnveiX0Dp8noJLBSV0wvdzujm51S +Uio/jHlUEV2lotrQBOfWNtEkwonXSwzZWSzimBCyEGLAwTx4lGXHmQftOtPd3zE sOT7Gw77ZCsulHoHiJyC0KpDSDS0NYVrtTI5BiuGgAivGi0YZw2XD3CYRIdy0m2Z lMoodYdiCgsxmrU6I6Rd/7DQBxD0Vhc+CGAyk41f7AwU4Fwq105kpSLupTtU+NzT ZpdvSXeirU8sxt+3WDOgv8esyYGZVVD8GuBbofMZQZ0vLq+FcDpYAW4w3LKvvi6X C+WN8f7SCI0kqpd4leyl6EG3SoQKFyPWobu0IlV520R9b76iBcyqooTIpvVa4Yk7 az6fKhi9gK/T6FHW78y6fnkczd47JKrC924m+g6P/hhTD5zQ956ferp0uFTjkPtF 8kNgRT7OIRi1JO783cnQx1uA61axC3GX1HFzsD9paVkTwRNtJ3eFsxtcYt7Nfv8D WGNWRQp5LmBsD/SqFBfk =MzOJ -----END PGP SIGNATURE----- Merge tag 'nfc-next-4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next Samuel Ortiz says: ==================== NFC: 4.1 pull request This is the NFC pull request for 4.1. This is a shorter one than usual, as the Intel Field Peak NFC driver could not make it in time. We have: - A new driver for NXP NCI based chipsets, like e.g. the NPC100 or the PN7150. It currently only supports an i2c physical layer, but could easily be extended to work on top of e.g. SPI. This driver also includes support for user space triggered firmware updates. - A few minor st21nfc[ab] fixes, cleanups, and comments improvements. - A pn533 error return fix. - A few NFC related logs formatting cleanups. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Ezequiel Garcia
|
8c2c8c03cd |
spi: img-spfi: Control CS lines with GPIO
When the CONTINUE bit is set, the interrupt status we are polling to identify if a transaction has finished can be sporadic. Even though the transfer has finished, the interrupt status may erroneously indicate that there is still data in the FIFO. This behaviour causes random timeouts in large PIO transfers. Instead of using the CONTINUE bit to control the CS lines, use the SPI core's CS GPIO handling. Also, now that the CONTINUE bit is not being used, we can poll for the ALLDONE interrupt to indicate transfer completion. Signed-off-by: Sifan Naeem <sifan.naeem@imgtec.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org> |
||
Ray Jui
|
1b55d62259 |
PCI: iproc: Add DT docs for Broadcom iProc PCIe driver
Document the Broadcom iProc PCIe platform interface device tree binding. Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Acked-by: Arnd Bergmann <arnd@arndb.de> |
||
Andrew Bresticker
|
5f9755d26f |
stmmac: Add an optional register interface clock
The DWMAC block on certain SoCs (such as IMG Pistachio) have a second clock which must be enabled in order to access the peripheral's register interface, so add support for requesting and enabling an optional "pclk". Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Cc: James Hartley <james.hartley@imgtec.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Ivan T. Ivanov
|
7414b0993c |
pinctrl: Add support for PM8916 GPIO's and MPP's
Add compatible string definitions and supported pin functions. Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |