2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 12:43:55 +08:00
Commit Graph

871127 Commits

Author SHA1 Message Date
zhong jiang
727fe909af media: dvb-frontends: Use DIV_ROUND_CLOSEST directly to make it readable
The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d
but is perhaps more readable.

Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-16 11:47:14 -03:00
Sean Young
d587cdb2a5 media: imon_raw: simplify loop
The code for pulse and space is the same so remove duplication.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-16 11:46:38 -03:00
Thomas Voegtle
1449458333 media: dvbsky: add support for eyeTV Geniatech T2 lite
Adds USB ID for the eyeTV Geniatech T2 lite to the dvbsky driver.
This is a Geniatech T230C based stick without IR and a different USB ID.

Signed-off-by: Thomas Voegtle <tv@lio96.de>
Tested-by: Jan Pieter van Woerkom <jp@jpvw.nl>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-16 11:46:05 -03:00
Benoit Parrot
3ff3a712a9 media: ti-vpe: vpe: don't rely on colorspace member for conversion
Up to now VPE was relying on the colorspace value of struct v4l2_format
as an indication to perform color space conversion from YUV to RGB or
not.

Instead we should used the source/destination fourcc codes as a more
reliable indication to perform color space conversion or not.

To do so, we rework the csc module to use "struct v4l2_format *" as
parameters, and reorganize the coefficients tables in a more logical
way.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 13:54:22 -03:00
Benoit Parrot
b373f84d77 media: v4l2-common: add RGB565 and RGB55 to v4l2_format_info
Add RGB565 and RGB555 to the v4l2_format_info table.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 13:53:41 -03:00
Benoit Parrot
d5a897c842 media: v4l2-common: add pixel encoding support
It is often useful to figure out if a pixel_format is either YUV or RGB
especially for driver who can perform the pixel encoding conversion.

Instead of having each driver implement its own "is_this_yuv/rgb"
function based on a restricted set of pixel value, it is better to do
this in centralized manner.

We therefore add a pixel_enc member to the v4l2_format_info structure to
quickly identify the related pixel encoding.
And add helper functions to check pixel encoding.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 13:53:23 -03:00
Benoit Parrot
9152dc9ec9 media: ti-vpe: csc: rgb-to-yuv HD full range coeff are wrong
The RGB to YUV HD full range coefficients did not match the TRM values
and appeared to be a cut-n-paste from the YUV to RGB section.

Replace the entries with the values from the TRM.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 13:52:44 -03:00
Benoit Parrot
98ca241d23 media: ti-vpe: vpe: fix v4l2_compliance issue related to xfer_func
All 4 of the "colorspace" components were not originally handled.
Causing issue related to xfer_func not being initialized properly.

This was found with v4l2-compliance test.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 13:52:20 -03:00
Benoit Parrot
34efd808db media: ti-vpe: vpe: use standard struct instead of duplicating fields
For each queue we need to maintain resolutions, pixel format,
bytesperline, sizeimage, colorspace, etc.

Instead of manually adding more entries in the vpe_q_data struct, it is
better to just add a "struct v4l2_format" member and use that to store
all needed information.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
[hverkuil@xs4all.nl: fix checkpatch warning]
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 13:51:55 -03:00
Benoit Parrot
f3320447a2 media: ti-vpe: Set the DMA mask and coherent mask
VPE uses VPDMA (built-in dma engine) to transfer data to and from the IP
and memory. VPDMA expect 32 bits addresses. To make sure that is always
the case set the DMA mask and coherent mask for the device.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 13:51:00 -03:00
Benoit Parrot
63728b1cab media: ti-vpe: vpdma: Use fixed type for address in descriptor
Using dma_addr_t as the type to hold address inside of a fix sized
descriptor used by the vpdma firmware is prone to fail when the expected
width is 32 bits and suddenly when CONFIG_LPAE is enabled the data size
is now 64 bits shifted the remaining members of the descriptor in memory
which confuses the firmware.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 13:50:36 -03:00
Benoit Parrot
cf6acb73b0 media: ti-vpe: vpe: ensure buffers are cleaned up properly in abort cases
v4l2-compliance fails with this message:

   fail: v4l2-test-buffers.cpp(691): ret == 0
   fail: v4l2-test-buffers.cpp(974): captureBufs(node, q, m2m_q,
frame_count, true)
   test MMAP: FAIL

This caused the following Kernel Warning:

WARNING: CPU: 0 PID: 961 at
drivers/media/v4l2-core/videobuf2-core.c:1658
__vb2_queue_cancel+0x174/0x1d8
...
CPU: 0 PID: 961 Comm: v4l2-compliance Not tainted
4.14.62-01720-g20ecd717e87a #6
Hardware name: Generic DRA72X (Flattened Device Tree)
Backtrace:
[<c020b5bc>] (dump_backtrace) from [<c020b8a0>] (show_stack+0x18/0x1c)
 r7:00000009 r6:60070013 r5:00000000 r4:c1053824
[<c020b888>] (show_stack) from [<c09232e8>] (dump_stack+0x90/0xa4)
[<c0923258>] (dump_stack) from [<c022b740>] (__warn+0xec/0x104)
  r7:00000009 r6:c0c0ad50 r5:00000000 r4:00000000
[<c022b654>] (__warn) from [<c022b810>] (warn_slowpath_null+0x28/0x30)
  r9:00000008 r8:00000000 r7:eced4808 r6:edbc9bac r5:eced4844
r4:eced4808
[<c022b7e8>] (warn_slowpath_null) from [<c0726f48>]
(__vb2_queue_cancel+0x174/0x1d8)
[<c0726dd4>] (__vb2_queue_cancel) from [<c0727648>]
(vb2_core_queue_release+0x20/0x40)
  r10:ecc7bd70 r9:00000008 r8:00000000 r7:edb73010 r6:edbc9bac
r5:eced4844
  r4:eced4808 r3:00000004
[<c0727628>] (vb2_core_queue_release) from [<c0729528>]
(vb2_queue_release+0x10/0x14)
  r5:edbc9810 r4:eced4800
[<c0729518>] (vb2_queue_release) from [<c0724d08>]
(v4l2_m2m_ctx_release+0x1c/0x30)
[<c0724cec>] (v4l2_m2m_ctx_release) from [<bf0e8f28>]
(vpe_release+0x74/0xb0 [ti_vpe])
  r5:edbc9810 r4:ed67a400
[<bf0e8eb4>] (vpe_release [ti_vpe]) from [<c070fccc>]
(v4l2_release+0x3c/0x80)
  r7:edb73010 r6:ed176aa0 r5:edbc9868 r4:ed5119c0
[<c070fc90>] (v4l2_release) from [<c033cf1c>] (__fput+0x8c/0x1dc)
  r5:ecc7bd70 r4:ed5119c0
[<c033ce90>] (__fput) from [<c033d0cc>] (____fput+0x10/0x14)
  r10:00000000 r9:ed5119c0 r8:ece392d0 r7:c1059544 r6:ece38d80
r5:ece392b4
  r4:00000000
[<c033d0bc>] (____fput) from [<c0246e00>] (task_work_run+0x98/0xb8)
[<c0246d68>] (task_work_run) from [<c022f1d8>] (do_exit+0x170/0xa80)
  r9:ece351fc r8:00000000 r7:ecde3f58 r6:ffffe000 r5:ece351c0
r4:ece38d80
[<c022f068>] (do_exit) from [<c022fb6c>] (do_group_exit+0x48/0xc4)
  r7:000000f8
[<c022fb24>] (do_group_exit) from [<c022fc00>]
(__wake_up_parent+0x0/0x28)
  r7:000000f8 r6:b6c6a798 r5:00000001 r4:00000001
[<c022fbe8>] (SyS_exit_group) from [<c0207c80>]
(ret_fast_syscall+0x0/0x4c)

These warnings are caused by buffers which not properly cleaned
up/release during an abort use case.

In the abort cases the VPDMA desc buffers would still be mapped and the
in-flight VB2 buffers would not be released properly causing a kernel
warning from being generated by the videobuf2-core level.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 13:50:08 -03:00
Benoit Parrot
2444846c0d media: ti-vpe: vpe: fix a v4l2-compliance failure about frame sequence number
v4l2-compliance fails with this message:

   fail: v4l2-test-buffers.cpp(294): \
	(int)g_sequence() < seq.last_seq + 1
   fail: v4l2-test-buffers.cpp(740): \
	buf.check(m2m_q, last_m2m_seq)
   fail: v4l2-test-buffers.cpp(974): \
	captureBufs(node, q, m2m_q, frame_count, true)
   test MMAP: FAIL

The driver is failing to update the source frame sequence number in the
vb2 buffer object. Only the destination frame sequence was being
updated.

This is only a reporting issue if the user space app actually cares
about the frame sequence number. But it is fixed nonetheless.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 13:49:41 -03:00
Benoit Parrot
0bac73adea media: ti-vpe: vpe: fix a v4l2-compliance failure about invalid sizeimage
v4l2-compliance fails with this message:

   fail: v4l2-test-formats.cpp(463): !pfmt.sizeimage
   fail: v4l2-test-formats.cpp(736): \
	Video Capture Multiplanar is valid, \
	but TRY_FMT failed to return a format
   test VIDIOC_TRY_FMT: FAIL

This failure is causd by the driver failing to handle out range
'bytesperline' values from user space applications.

VPDMA hardware is limited to 64k line stride (16 bytes aligned, so 65520
bytes). So make sure the provided or calculated 'bytesperline' is
smaller than the maximum value.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 13:49:02 -03:00
Benoit Parrot
e20b248051 media: ti-vpe: vpe: Make sure YUYV is set as default format
v4l2-compliance fails with this message:

   fail: v4l2-test-formats.cpp(672): \
	Video Capture Multiplanar: TRY_FMT(G_FMT) != G_FMT
   fail: v4l2-test-formats.cpp(672): \
	Video Output Multiplanar: TRY_FMT(G_FMT) != G_FMT
	...
   test VIDIOC_TRY_FMT: FAIL

The default pixel format was setup as pointing to a specific offset in
the vpe_formats table assuming it was pointing to the V4L2_PIX_FMT_YUYV
entry. This became false after the addition on the NV21 format (see
above commid-id)

So instead of hard-coding an offset which might change over time we need
to use a lookup helper instead so we know the default will always be what
we intended.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Fixes: 40cc823f7005 ("media: ti-vpe: Add support for NV21 format")
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 13:48:37 -03:00
Benoit Parrot
06bec72b25 media: ti-vpe: vpe: fix a v4l2-compliance warning about invalid pixel format
v4l2-compliance warns with this message:

   warn: v4l2-test-formats.cpp(717): \
 	TRY_FMT cannot handle an invalid pixelformat.
   warn: v4l2-test-formats.cpp(718): \
 	This may or may not be a problem. For more information see:
   warn: v4l2-test-formats.cpp(719): \
 	http://www.mail-archive.com/linux-media@vger.kernel.org/msg56550.html
	...
   test VIDIOC_TRY_FMT: FAIL

We need to make sure that the returns a valid pixel format in all
instance. Based on the v4l2 framework convention drivers must return a
valid pixel format when the requested pixel format is either invalid or
not supported.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 13:48:18 -03:00
Benoit Parrot
a37980ac5b media: ti-vpe: vpe: fix a v4l2-compliance failure causing a kernel panic
v4l2-compliance fails with this message:

   warn: v4l2-test-formats.cpp(717): \
   	TRY_FMT cannot handle an invalid pixelformat.
   test VIDIOC_TRY_FMT: FAIL

This causes the following kernel panic:

Unable to handle kernel paging request at virtual address 56595561
pgd = ecd80e00
*pgd=00000000
Internal error: Oops: 205 [#1] PREEMPT SMP ARM
...
CPU: 0 PID: 930 Comm: v4l2-compliance Not tainted \
	4.14.62-01715-gc8cd67f49a19 #1
Hardware name: Generic DRA72X (Flattened Device Tree)
task: ece44d80 task.stack: ecc6e000
PC is at __vpe_try_fmt+0x18c/0x2a8 [ti_vpe]
LR is at 0x8

Because the driver fails to properly check the 'num_planes' values for
proper ranges it ends up accessing out of bound data causing the kernel
panic.

Since this driver only handle single or dual plane pixel format, make
sure the provided value does not exceed 2 planes.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 13:47:52 -03:00
Ram Prasad
661eaa3c4b media: ti-vpe: Set MAX height supported to 2048 pixels
VPE's max height supported MAX_H is set to 1184 which is the
padded height from VC1 decoder output.

In case of 90, 270 degree rotated video processing, input to
VPE will be 1080x1920, 720x1280 etc and MAX_H needs to be set
correct value. Setting MAX_H to 2048 as worst case height.

Signed-off-by: Ram Prasad <x0038811@ti.com>
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 13:47:13 -03:00
Nikhil Devshatwar
b2bb3d822f media: ti-vpe: Add support for NV21 format
In NV21 format, the chroma plane is written to memory such that the U
and V components are swapped for NV12.

Create a new entry in the VPDMA formats to describe the correct data
types used in the data descriptors.

Update all checks for NV12 and add NV21 there as well.

Add support for V4L2_PIX_FMT_NV21 format for both capture and output
streams.

Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 13:46:46 -03:00
Nikhil Devshatwar
95959793d2 media: ti-vpe: Add support for SEQ_BT
SEQ_BT indicates the buffer for bottom field needs to be processed
before the top field.

Simplify the field selection logic to support SEQ_BT as well.

Modify the interlace flags to include any of alternate, SEQ_TB, SEQ_BT.
Update other format error checking to consider SEQ_BT.
Replace SEQ_TB with SEQ_XX wherever applicable.

Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 13:45:51 -03:00
Benoit Parrot
55c686ff93 media: ti-vpe: vpe: Remove unnecessary use of container_of
Instead of saving a pointer to the 'fh' member of struct vpe_ctx to
later have to use container_of to retrieve the actual pointer to the
context structure, which seems to confuse static code analysis tool
anyways, just save the pointer to the actual structure and then retrieve
it directly.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 13:43:12 -03:00
Benoit Parrot
4d59c7d455 media: ti-vpe: vpe: Add missing null pointer checks
A few NULL pointer checks were missing.
Add check with appropriate return code.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 13:42:44 -03:00
Benoit Parrot
102af9b992 media: ti-vpe: vpe: Fix Motion Vector vpdma stride
commit 3dc2046ca7 ("[media] media: ti-vpe: vpe: allow use of user
specified stride") and commit da4414eaed ("[media] media: ti-vpe: vpdma:
add support for user specified stride") resulted in the Motion Vector
stride to be the same as the image stride.

This caused memory corruption in the output image as mentioned in
commit 00db969964 ("[media] media: ti-vpe: vpe: Fix line stride
for output motion vector").

Fixes: 3dc2046ca7 ("[media] media: ti-vpe: vpe: allow use of user specified stride")
Fixes: da4414eaed ("[media] media: ti-vpe: vpdma: add support for user specified stride")
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 13:42:25 -03:00
Benoit Parrot
5139de5d5e media: ti-vpe: Fix a parallel build issue
When TI CAL was introduce as another driver under platform/ti-vpe
adding a second entry into the ti-vpe directory in the platform
Makefile caused issues during parallel build.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 11:39:32 -03:00
Ricardo Ribalda Delgado
d30f4e3d4f media: imx214: Add new control with V4L2_CID_UNIT_CELL_SIZE
According to the product brief, the unit cell size is 1120 nanometers^2.

https://www.sony-semicon.co.jp/products_en/IS/sensor1/img/products/ProductBrief_IMX214_20150428.pdf

Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 11:38:50 -03:00
Ricardo Ribalda Delgado
2e8db63e1f media: v4l2-ctrl: Add new helper v4l2_ctrl_ptr_create
This helper function simplifies the code by not needing a union
v4l2_ctrl_ptr and an assignment every time we need to use
a ctrl_ptr.

Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 11:38:21 -03:00
Ricardo Ribalda Delgado
3f0a700624 media: Documentation: media: Describe V4L2_CID_UNIT_CELL_SIZE
New control to pass to userspace the width/height of a pixel. Which is
needed for calibration and lens selection.

Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 11:38:02 -03:00
Ricardo Ribalda Delgado
61fd036d01 media: add V4L2_CID_UNIT_CELL_SIZE control
This control returns the unit cell size in nanometres. The struct provides
the width and the height in separated fields to take into consideration
asymmetric pixels and/or hardware binning.
This control is required for automatic calibration of sensors/cameras.

Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 11:37:26 -03:00
Ricardo Ribalda Delgado
8ae3a08629 media: Documentation: media: Document V4L2_CTRL_TYPE_AREA
A struct v4l2_area containing the width and the height of a rectangular
area.

Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 11:36:54 -03:00
Ricardo Ribalda Delgado
d1dc49370f media: add V4L2_CTRL_TYPE_AREA control type
This type contains the width and the height of a rectangular area.

Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 11:36:32 -03:00
Ricardo Ribalda Delgado
f7fe9f9528 media: Documentation: v4l2_ctrl_new_std_compound
Function for initializing compound controls with a default value.

Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 11:35:32 -03:00
Ricardo Ribalda Delgado
b35d6c02aa media: v4l2-core: Implement v4l2_ctrl_new_std_compound
Currently compound controls do not have a simple way of initializing its
values. This results in ofuscated code with type_ops init.

This patch introduces a new field on the control with the default value
for the compound control that can be set with the brand new
v4l2_ctrl_new_std_compound function

Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org>
[hverkuil@xs4all.nl: fix checkpatch warning]
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 11:34:58 -03:00
Markus Elfring
d8b1ad7ce7 media: platform: Use devm_platform_ioremap_resource() in two functions
Simplify these function implementations by using a known wrapper function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 07:29:07 -03:00
Niklas Söderlund
5c9de1fa03 media: rcar-vin: Use bytes per line instead of width for UV offset
The image size is doubled for NV16 and is calculated as bytesperline *
height * 2 to accommodate the split of UV data. When writing the offset
to hardware, the width is used instead of bytesperline, fix this.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 07:28:43 -03:00
Steve Longerbeam
2a4558c6ad media: imx: Move pads init to probe
If a subdevice is unregistered and then registered again without the
driver being removed and re-probed (which will happen when the media
device is removed and re-probed without also removing/re-probing the
subdevice), media_device_register_entity() is called with a non-zero
entity->num_pads, and then the subdevice's .registered callback calls
media_entity_pads_init(). Thus the subdevice's pad objects are added
to the media device pad list twice, causing list corruption.

One way to fix this would be to create media_entity_pads_destroy(),
and call it in the subdevice's .unregistered callback. But calling
media_entity_pads_init() in the .registered callbacks was done for
legacy reasons and is no longer necessary, so move the call to
media_entity_pads_init() into the subdevice's probe functions. This
fixes the duplicate pad obejcts in the media device pad list.

Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 07:28:25 -03:00
Steve Longerbeam
1f46424646 media: imx: Move capture device init to registered
If the CSI is unregistered and then registered again without the
driver being removed and re-probed (which will happen when the media
device is removed and re-probed without also removing/re-probing the
CSI), the result is the kobject error and backtrace "tried to init an
initialized object". This is because the video device is left in an
initialized state after being unregistered, thus the video device's
underlying kobject is also left in an initialized state when the device
is registered again.

Fix this by moving imx_media_capture_device_init() and _remove()
into csi_registered() and csi_unregistered(). This will create a new
un-initialized video device when the CSI is re-registered. Do this for
all the subdevices that register a capture device.

Reported-by: Russell King <linux@armlinux.org.uk>
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 07:26:28 -03:00
Niklas Söderlund
dbb8d05a9d media: rcar-vin: Create compose rectangle where it is used
The rectangle used to correct the compose settings when changing the
format was created inside a helper function and not where it was used.
This is confusing and makes the code harder to read, fix this.

This cleanup is made possible due to refactoring elsewhere and there is
no functional change.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 07:24:28 -03:00
Niklas Söderlund
aacbd4ff3a media: rcar-vin: Rename wrongly named rectangle
After recent refactoring the rectangle named crop no longer reflects it
usage, to contain the source rectangle. Fix this by renaming it. There
is no functional change.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 07:23:34 -03:00
Wei Yongjun
1edfa9b168 media: vimc: Fix error return code in vimc_register_devices()
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: f13d5f3619 ("media: vimc: Collapse component structure into a single monolithic driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 07:22:54 -03:00
Alan Stern
9e08117c9d media: usbvision: Fix races among open, close, and disconnect
Visual inspection of the usbvision driver shows that it suffers from
three races between its open, close, and disconnect handlers.  In
particular, the driver is careful to update its usbvision->user and
usbvision->remove_pending flags while holding the private mutex, but:

	usbvision_v4l2_close() and usbvision_radio_close() don't hold
	the mutex while they check the value of
	usbvision->remove_pending;

	usbvision_disconnect() doesn't hold the mutex while checking
	the value of usbvision->user; and

	also, usbvision_v4l2_open() and usbvision_radio_open() don't
	check whether the device has been unplugged before allowing
	the user to open the device files.

Each of these can potentially lead to usbvision_release() being called
twice and use-after-free errors.

This patch fixes the races by reading the flags while the mutex is
still held and checking for pending removes before allowing an open to
succeed.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 07:22:38 -03:00
Alan Stern
c7a1914640 media: usbvision: Fix invalid accesses after device disconnect
The syzbot fuzzer found two invalid-access bugs in the usbvision
driver.  These bugs occur when userspace keeps the device file open
after the device has been disconnected and usbvision_disconnect() has
set usbvision->dev to NULL:

	When the device file is closed, usbvision_radio_close() tries
	to issue a usb_set_interface() call, passing the NULL pointer
	as its first argument.

	If userspace performs a querycap ioctl call, vidioc_querycap()
	calls usb_make_path() with the same NULL pointer.

This patch fixes the problems by making the appropriate tests
beforehand.  Note that vidioc_querycap() is protected by
usbvision->v4l2_lock, acquired in a higher layer of the V4L2
subsystem.

Reported-and-tested-by: syzbot+7fa38a608b1075dfd634@syzkaller.appspotmail.com

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 07:22:06 -03:00
Colin Ian King
59251a8be3 media: gspca: make array st6422_bridge_init static, makes object smaller
Don't populate the array st6422_bridge_init on the stack but instead
make it static. Makes the object code smaller by 231 bytes.

Before:
   text	   data	    bss	    dec	    hex	filename
   3419	    752	     64	   4235	   108b	gspca/stv06xx/stv06xx_st6422.o

After:
   text	   data	    bss	    dec	    hex	filename
   3124	    816	     64	   4004	    fa4	gspca/stv06xx/stv06xx_st6422.o

(gcc version 9.2.1, amd64)

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 07:21:46 -03:00
Colin Ian King
27dbc2e63b media: cx18: make array mapping static, makes object smaller
Don't populate the array mapping on the stack but instead make it
static. Makes the object code smaller by 79 bytes.

Before:
   text	   data	    bss	    dec	    hex	filename
  27572	   2096	      0	  29668	   73e4	drivers/media/pci/cx18/cx18-ioctl.o

After:
   text	   data	    bss	    dec	    hex	filename
  27429	   2160	      0	  29589	   7395	drivers/media/pci/cx18/cx18-ioctl.o

(gcc version 9.2.1, amd64)

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 07:21:28 -03:00
YueHaibing
69bb7eb883 media: cx231xx: remove duplicated include from cx231xx-417.c
Remove duplicated include.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 07:21:12 -03:00
Jeeeun Evans
80a501a46f media: staging: media: imx: Use devm_platform_ioremap_resource().
This patch fixes a warning by coccicheck:
drivers/staging/media/imx/imx7-mipi-csis.c:973:1-12: WARNING: Use devm_platform_ioremap_resource for state -> regs

Use devm_platform_ioremap_resource helper which wraps platform_get_resource()
and devm_ioremap_resource() together.

Signed-off-by: Jeeeun Evans <jeeeunevans@gmail.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 07:20:53 -03:00
Christophe JAILLET
e1444e9b04 media: cx88: Fix some error handling path in 'cx8800_initdev()'
A call to 'pci_disable_device()' is missing in the error handling path.
In some cases, a call to 'free_irq()' may also be missing.

Reorder the error handling path, add some new labels and fix the 2 issues
mentionned above.

This way, the error handling path in more in line with 'cx8800_finidev()'
(i.e. the remove function)

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 07:20:01 -03:00
Christophe JAILLET
2eca8e4c1d media: v4l: cadence: Fix how unsued lanes are handled in 'csi2rx_start()'
The 2nd parameter of 'find_first_zero_bit()' is a number of bits, not of
bytes. So use 'csi2rx->max_lanes' instead of 'sizeof(lanes_used)'.

Fixes: 1fc3b37f34 ("media: v4l: cadence: Add Cadence MIPI-CSI2 RX driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 07:19:13 -03:00
Navid Emamdoost
8dbdee8e8a media: usb: null check create_singlethread_workqueue
In sd_start return value of create_singlethread_workqueue needs null
check.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 07:18:10 -03:00
Navid Emamdoost
68085f314d media: gspca: null check create_singlethread_workqueue
In sd_start the return value of create_singlethread_workqueue needs
null check.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 07:17:54 -03:00
Daniel Gonzalez Cabanelas
e6f45ea2e7 media: cx88: Add support for NotOnlyTV LV3H card
Add support for the PCI hybrid card NotOnlyTV LV3H. This card consists of:
- A/V Controller: Conexant CX-23883
- Tuner: Xceive XC3028L
- DVB-T Decoder: Zarlink ZL10353

This patch adds support for DVB-T,  Analog TV, FM radio, composite and
S-video inputs. The IR input isn't supported.

Since the PCI subsystem ID (14f1:8852) is the same as the Geniatech
X8000-MT, but they are different boards, the card is only supported via
insmod option: options cx88xx card=91

For the record this is the eeprom dump, useful if someone wanted to
implement the card auto detection:

07 ff ff ff f1 14 52 88 04 04 32 55 f8 00 a2 02
a1 00 40 63 06 11 44 30 03 df 40 80 00 20 00 73
3c 10 00 00 00 00 ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff ff ff ff ff ff ff ff ff a0 00

Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10 07:17:19 -03:00