2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-25 21:54:06 +08:00
Commit Graph

20520 Commits

Author SHA1 Message Date
Takashi Sakamoto
c50fb91f53 ALSA: dice: Split PCM functionality into a file
This commit adds a file and move some codes related to PCM functionality.

Currently PCM playback is supported. PCM capture will be supported in followed
commits.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-29 20:07:47 +01:00
Takashi Sakamoto
6eb6c81eee ALSA: dice: Split stream functionality into a file
This commit adds a file with some helper functions for streaming, and move some
codes into the file with some arrangements.

Well-known CMP is not used to start/stop streams for Dice chipset. It's
achieved by writing to specific address. We call this way as 'enable'.
When devices are 'enabled', streaming starts in registered isochronous channel.
Some helper functions are already implemented in previous commit.

Basically, the stream is compliant to IEC 61883-6, so-called as AMDTP. But Dice
has a specific quirk, so called-as 'Dual Wire'. This quirk is applied at
176.4/192.0kHz. In this mode, each packet includes double number of events than
number in the specification, and stream runs at a half of sampling rate.

There is another quirk at bus reset. Dice chipset handles drivers' request but
don't re-enable streaming. So stream should be stopped.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-29 20:07:33 +01:00
Takashi Sakamoto
7c2d4c0cf5 ALSA: dice: Split transaction functionality into a file
This commit adds a file with some helper functions for transaction, and move
some codes into the file with some arrangements.

For Dice chipset, well-known FCP or AV/C commands are not used to control
devices. It's achieved by read/write transactions into specific addresses.

Dice's address area is split into 5 areas. Each area has its own role. The
offset for each area can be got by reading head of the address area. By
reading these areas, drivers can get to know device status. By writing these
areas, drivers can change device status.

Dice has a specific mechanism called as 'notification'. When device status is
changed, Dice devices tells the event by sending transaction. This notification
is sent to an address which drivers register in advance. But this causes an
issue to drivers.

To handle the notification, drivers need to allocate its own callback function
to the address region in host controller. This region is exclusive. For the
other applications, drivers must give a mechanism to read the received
notification. For this purpose, Dice driver already implements hwdep interface.

Dice chipset doesn't allow drivers to register several addresses. In this
reason, when this driver is applied to a device, the other drivers should
_not_ try to register its own address to the device.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-29 20:04:15 +01:00
Takashi Sakamoto
14ff6a0948 ALSA: dice: Move file to its own directory
In followed commits, dice driver is split into several files. For easily
managing these files, this commit adds subdirectory and move file into
the directory.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-29 20:03:45 +01:00
Takashi Sakamoto
732d153fbe ALSA: dice: Rename structure and its members
Currently, dice driver supports AMDTP out-stream. In followed commits, AMDTP
in-stream will be supported but current name of members in dice structure
are not propper. This commit renames these members to proper name.

Additionally, for easily distinguishing local symbols from structure tag,
rename dice tag into snd_dice.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-29 20:03:17 +01:00
Takashi Sakamoto
81fc5ad515 ALSA: dice: suppress checkpatch.pl warnings
The checkpatch.pl generates some warnings due to:
 - C99 comment
 - a line over 80 characters
 - min() for parameters with different types

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-29 20:02:48 +01:00
Linus Torvalds
16cf45c09c sound fixes for 3.18-rc7
No excitement, here are only minor fixes: an endian fix for the
 new DSD format we added in 3.18, a fix for HP mute LED, and a
 fix for Native Instrument quirk.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJUeC5WAAoJEGwxgFQ9KSmkaR4P/0NQWq7Vd5DsRk2DSW1XhYpQ
 gZlpxWwc7De4W4MsZQtWSQQn1e3Mm6OYa0srZGzmFQTI1ZBXLZq9O/wott4Q6QgZ
 lrWWBzgFenguA8r0bl/VGhFpySt/RE+8hi5Z/vMNG3ATHZxq3DzwE3xB3CaOc+ON
 PI5ba7XGLz2Q9txTaFD0g0EZT0uLpZnRZZDD12cHCPvAUIGL1IdvSQio3NFlia+l
 9gCTe8uZ8BPUt1+LYAcbVKl5xZn8vVOw9fUbcFj7OOoFu48ve2GgtHRVWdYyI9k9
 F6yBOMUQtw+XyKvlcectNbEX/6ORewIV0m15damK4REMQeCapGIaoTXMB6yRd3Ld
 zyj1Ld/JAxqrd3Iy0wF4tP/SHy+fJ1e+WSe5rIurCMlUa4CXkSwX65n1DCuonbsG
 GsVaXlspSk2j/ZhkqB0rDqTQKqKxSrutqHHwwsfA41iRpOUECmUZU8wM/mj/0THV
 0RoWYbJjc0STs+x0ysVo2OudumnMcEhx56SHqJK8Kr1y16m9boxn2exk139qMDb/
 Ua6ZGxJiohNICzHsADDcETtnfzOc1bTDhyP058cKAmtmw/U91zpyEAp40xAUe+hL
 Ix/z8yVjyIM8RLNizxad90s00hpOmOHDp/idLH4Ok8DoDx97IVhHzqyu8mbiTp8A
 wb69fsQApL/lRoTVDbtU
 =azkh
 -----END PGP SIGNATURE-----

Merge tag 'sound-3.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "No excitement, here are only minor fixes: an endian fix for the new
  DSD format we added in 3.18, a fix for HP mute LED, and a fix for
  Native Instrument quirk"

* tag 'sound-3.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: pcm: Add big-endian DSD sample formats and fix XMOS DSD sample format
  ALSA: hda - One more HP machine needs to change mute led quirk
  ALSA: usb-audio: Use snd_usb_ctl_msg() for Native Instruments quirk
2014-11-28 13:54:53 -08:00
Takashi Iwai
5031466387 Merge branch 'for-linus' into for-next
The commit [7a2e9ddc: ALSA: usb-audio: Add native DSD support for
Denon/Marantz DACs] requires the new format definition that has
landed only in for-next branch.
2014-11-28 18:30:19 +01:00
Jurgen Kramer
6874daad4b ALSA: usb-audio: Add mode select quirk for Denon/Marantz DACs
Denon/Marantz USB DACs need a specific vendor command to switch between PCM and
DSD mode. This patch adds a new quirk function to switch between the two modes
using the specific USB vendor command.

This patch applies to the following devices:
- Marantz SA-14S1
- Marantz HD-DAC1

Signed-off-by: Jurgen Kramer <gtmkramer@xs4all.nl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-28 18:02:35 +01:00
Jurgen Kramer
7a2e9ddc90 ALSA: usb-audio: Add native DSD support for Denon/Marantz DACs
This patch adds native DSD support for the following devices:
- Marantz SA-14S1
- Marants HD-DAC1

Signed-off-by: Jurgen Kramer <gtmkramer@xs4all.nl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-28 18:00:50 +01:00
Jie Yang
7bb73cbd07 ASoC: Intel: Move capture PCM pin to PCM0 for Broadwell/Haswell
Move capture PCM pin from PCM4 to PCM0 for Broadwell/Haswell.
This will allow us to integrate with pulseaudio better for
usually default device is set to 0.

Signed-off-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-28 15:35:04 +00:00
Jie Yang
c5f0406bdc ASoC: Intel: Correct the xmax volume
The xmax volume should be corrected to ARRAY_SIZE(volume_map)-1, otherwise,
the xmax value will be mapped to 0 wrongly.

Signed-off-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-28 11:40:30 +00:00
Takashi Iwai
7c7320157a ALSA: hda - Allow forcibly enabling/disabling snoop
User can pass snoop option to enable/disable the snoop behavior, but
currently azx_check_snoop_available() always turns it off for some
devices.  For better debuggability, change the parameter as bint, and
allow user to enable/disable forcibly the snoop when specified via the
module option.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-28 08:47:29 +01:00
Takashi Iwai
37e661ee10 ALSA: hda - Add AZX_DCAPS_SNOOP_OFF (and refactor snoop setup)
Add a new driver_caps bit, AZX_DCAPS_SNOOP_OFF, to set the snoop off
as default.  This new bit is used for the checks in
azx_check_snoop_available().  Most of case-switches are replaced with
the new dcaps in each entry.

While working on it, for avoiding to spend more bits, combine three
bits AZX_DCAPS_SNOOP_SCH, AZX_DCAPS_SNOOP_ATI and
AZX_DCAPS_SNOOP_NVIDIA bits into a flat type of two bits.  This
reduces the bits usages, and assign AZX_DCAPS_OFF to this empty bit
now.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-28 08:47:28 +01:00
Fabio Estevam
d206f66177 ASoC: mxs-sgtl5000: Remove MCLK restriction
According to the sgtl5000 datasheet the MCLK frequency range restriction of
8 to 27 MHz only applies when the PLL is used - synchronous SYS_MCLK input mode.

mxs-sgtl5000 machine sets the codec as slave, and mx28 generates MCLK in the
range of 256*fs, 384*fs or 512*fs, which is called asynchronous SYS_MCLK
input.

In asynchronous SYS_MCLK we cannot have the 8 to 27 MHz check because if we
want to play a 8KHz sample rate track, with a MCLK of 8k * 512 = 4.096MHz the
current check would return -EINVAL, which is not correct.

Remove the 8 to 27MHz frequency check, since this only applies to the
synchronous SYS_MCLK input case.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-27 17:42:16 +00:00
Fabio Estevam
2a4cfd1022 ASoC: sgtl5000: Allow 8kHz playback in codec slave mode
When trying to play a 8kHz file with codec in slave mode we get the following
error on a mx28evk:

$ aplay -Dhw:0,0 stereo_8k.wav
Playing WAVE 'stereo_8k.wav' : Signed 16 bit Little Endian, Rate 8000 Hz, Stereo
[   21.218647] sgtl5000 0-000a: PLL not supported in slave mode
[   21.224559] sgtl5000 0-000a: 128 ratio is not supported. SYS_MCLK needs to be 256, 384 or 512 * fs
[   21.233687] sgtl5000 0-000a: ASoC: can't set sgtl5000 hw params: -22
aplay: set_params:1123: Unable to install hw params:

This error happens because we are using 'sys_fs' instead of 'frame_rate' in the
valid ratio check.

Use the real'frame_rate' so that the ratio is correctly calculated and the
playback can run.

sgtl5000 codec manual states that in 'Synchronous SYS_MCLK input' mode that the
following SYS_CLK frequencies are allowed: 256*fs, 384*fs, 512*fs.

, where fs is the sampling frequency, which can be in the range of:
8, 11.025, 16, 22.5, 32, 44.1, 48, 96 kHz.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-27 17:42:01 +00:00
Fabio Estevam
d819ce965d ASoC: sgtl5000: Remove MCLK restriction
According to the sgtl5000 datasheet the MCLK frequency range restriction of
8 to 27 MHz only applies when the PLL is used - synchronous SYS_MCLK input mode.

When running the codec as slave, the master should generate MCLK in the range of
256*fs, 384*fs or 512*fs, which is called asynchronous SYS_MCLK input mode.

In asynchronous SYS_MCLK we cannot have the 8 to 27 MHz check because if we
want to play a 8KHz sample rate track, with a MCLK of 8k * 512 = 4.096MHz the
current check would return -EINVAL, which is not correct.

Remove the 8 to 27MHz frequency check, since this only applies to the
synchronous SYS_MCLK input case.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-27 17:42:01 +00:00
Takashi Iwai
acf403ecc4 Merge branch 'topic/usb-resume' into for-next
Merge the proper mixer resume support for quirk codes.
2014-11-27 12:40:51 +01:00
Lars-Peter Clausen
c4ee42a050 ASoC: twl6040: Cleanup manual bias level transitions
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.

Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-27 11:18:27 +00:00
Lars-Peter Clausen
3ec8d20364 ASoC: twl4030: Cleanup manual bias level transitions
Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-27 11:18:05 +00:00
Lars-Peter Clausen
90db15e17e ASoC: tlv320dac33: Cleanup manual bias level transitions
Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-27 11:17:34 +00:00
Lars-Peter Clausen
68f438378c ASoC: tlv320aic3x: Cleanup manual bias level transitions
Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-27 11:17:02 +00:00
Lars-Peter Clausen
f10c0a71e6 ASoC: tlv320aic32x4: Cleanup manual bias level transitions
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.

Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-27 11:16:35 +00:00
Lars-Peter Clausen
a43a262901 ASoC: tlv320aix31xx: Cleanup manual bias level transitions
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.

Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-27 11:16:07 +00:00
Lars-Peter Clausen
aabb87f003 ASoC: tlv320aic23: Cleanup manual bias level transitions
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.

Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-27 11:15:27 +00:00
Lars-Peter Clausen
0eef4ed597 ASoC: sn95031: Cleanup bias level transitions
Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-27 11:15:00 +00:00
Lars-Peter Clausen
68d27bc63c ASoC: lm49453: Cleanup manual bias level transitions
Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-27 11:14:39 +00:00
Lars-Peter Clausen
6200b75a8b ASoC: cq93vc: Cleanup manual bias level transitions
Remove the manual transition back to SND_SOC_BIAS_STANDBY in resume. This
is already be automatically handled by the ASoC core.

Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed. While we are at it also remove the unused codec field from
the cq93vc struct so the whole probe function can be removed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-27 11:11:50 +00:00
Lars-Peter Clausen
002fe7c831 ASoC: cq93vc: Remove unused state struct
While two of the fields in the cq93vc driver state struct are initialized
none of them are ever acutally read again. So remove the whole struct.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-27 11:11:30 +00:00
Jie Yang
525b8634d8 ASoC: Intel: Remove useless loopback volume control for Broadwell
On Broadwell, the ADSP FW don't support loopback record volume tuning,
so here remove this control.

Signed-off-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-27 11:00:50 +00:00
Dan Carpenter
d98123a76b ASoC: sigmadsp: uninitialized variable in sigmadsp_activate_ctrl()
The "changed" variable should be set to false at the start.

Fixes: a35daac77a ('ASoC: sigmadsp: Add support for fw v2')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
2014-11-27 10:59:33 +00:00
Zidan Wang
3ad5e861a7 ASoC: wm8960: Move register initialisation to I2C driver probe()
We must ensure that the clocking configuration is valid as rapidly as possible.
And do software reset before the others registers updates, or the registers
will be reset to the default state.

Signed-off-by: Zidan Wang <b50113@freescale.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-27 10:35:02 +00:00
Dan Carpenter
69eba10e60 ALSA: hda - using uninitialized data
In olden times the snd_hda_param_read() function always set "*start_id"
but in 2007 we introduced a new return and it causes uninitialized data
bugs in a couple of the callers: print_codec_info() and
hdmi_parse_codec().

Fixes: e8a7f136f5 ('[ALSA] hda-intel - Improve HD-audio codec probing robustness')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-27 09:34:41 +01:00
Krishna Mohan Dani
d683d0b690 ASoC: Samsung: Add arndale_rt5631 machine driver and binding
Adding machine driver to instantiate I2S based realtek's ALC5631
sound card on Arndale board.

There are other variants of Audio Daughter Cards for Arndale
Board for which support already exists but there is no support for
Realtek's alc5631 codec hence support for ALC5631 based machine
driver is being added.
This patch also documents the device tree binding for the Arndale
board based machine driver.

Signed-off-by: Claude Youn <claude.youn@gmail.com>
Signed-off-by: Krishna Mohan Dani <krishna.md@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-26 16:44:44 +00:00
Lars-Peter Clausen
e874bf5f76 ASoC: Disable regmap helpers if regmap is disabled
If regmap is disabled there will be no users of the ASoC regmap helpers.
Furthermore regmap_exit() will no be defined causing the following compile
error:
	sound/soc/soc-core.c: In function 'snd_soc_component_exit_regmap':
	sound/soc/soc-core.c:2645:2: error: implicit declaration of function
		'regmap_exit' [-Werror=implicit-function-declaration]

So disable the helpers if regmap is disabled.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Fixes: 20feb88198 ASoC: Add helper functions for deferred regmap setup")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-25 21:15:31 +00:00
Lars-Peter Clausen
69b93607a9 ASoC: qi_lb60: Pass flags to gpiod_get()
Pass flags to gpiod_get() to automatically configure the GPIOs. This is shorter
and not passing any flags to gpiod_get() will eventually no longer be supported.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-25 19:37:01 +00:00
Jean-Francois Moine
7195d920bd ASoC: simple-card: Remove useless function argument
The device node pointer 'cpu' is not used in the function
asoc_simple_card_parse_daifmt().

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-25 13:49:33 +00:00
Jean-Francois Moine
93b0f3eeeb ASoC: core: add multi-codec support in DT
This patch exports a core function which handles the DT description
of multi-codec links (as: "sound-dai = <&hdmi 0>, <&spdif_codec>;")
and creates a CODEC component array in the DAI link.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-25 13:21:14 +00:00
Jie Yang
f1e5982546 ASoC: Intel: Fix stream volume set no effect issue on Broadwell
The volume setting control for capture stream doesn't take effect on intel
Broadwell platform. Root cause it at 2 points:
1. set stream volume with channel=2 is wrongly bapassed;
2. the saved stream volume should be restored after stream is commit.

Here correct these 2 items to fix the stream volume set issue.

Signed-off-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-25 13:08:04 +00:00
Nicolin Chen
cb3fc1ff46 ASoC: fsl-asoc-card: Add slot_width setting for cpu-dai
ESAI may need to use fixed slot width to comply with external
CODEC. So this set_tdm_slot() call will allow the ESAI driver
to override its default dynamic slot width policy.

Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-25 12:47:32 +00:00
Nicolin Chen
86ea522b36 ASoC: fsl_esai: Use dynamic slot width as default
The driver previously used 32-bit fixed slot width as default.
In result, ESAI might use 32-bit length to capture 16-bit width
audio slot from CODEC side when ESAI is running as DAI slave.

So this patch just removes the default slot_width so as to use
dynamic slot width. If there comes a specific situation that
needs a fixed width, the machine driver shall set slot_width
via set_tdm_slot() so as to let the ESAI driver replace the
dynamic width policy with the fixed value.

Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-25 12:47:13 +00:00
Oder Chiou
6fe17da00b ASoC: rt5677: Fix the issue that the regmap_range "rt5677_ranges" cannot be accessed
After the patch "ASoC: rt5677: Use specific r/w function for DSP mode", the
regmap_range "rt5677_ranges" was not registered in rt5677_regmap_physical, and
it caused that the regmap_range "rt5677_ranges" cannot be accessed by the
specific r/w function. The patch fixes this issue.

Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-25 12:30:37 +00:00
Bard Liao
ff4541c3f4 ASoC: rt5670: add DMIC ASRC support
This patch will enable ASRC for DMIC if ASRC is useable.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-25 12:12:53 +00:00
Bard Liao
e50334d4e1 ASoC: rt5670: check if asrc is useable
To use ASRC, the sysclk should be faster than 384 times sample rate of I2S1.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-25 12:12:53 +00:00
Bard Liao
2d4e2d0205 ASoC: rt5645: multiple JD mode support
There are 3 JD modes in RT5645. This patch configure register
values according to platform data.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-25 12:09:48 +00:00
kbuild test robot
141f87d4d6 ASoC: sigmadsp: fix simple_return.cocci warnings
sound/soc/codecs/sigmadsp.c:656:1-4: WARNING: end returns can be simpified and declaration on line 636 can be dropped

 Simplify a trivial if-return sequence.  Possibly combine with a
 preceding function call.
Generated by: scripts/coccinelle/misc/simple_return.cocci

Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-25 11:07:53 +00:00
Andreas Ruprecht
8d213de7ff ASoC: rockchip: i2s: Fix Kconfig for I2S device driver
Currently, CONFIG_SND_SOC_ROCKCHIP_I2S could also be selected
without having CONFIG_SND_SOC_ROCKCHIP enabled.

As this makes no sense, a Kconfig dependency is added to
CONFIG_SND_SOC_ROCKCHIP_I2S. This will make the item visible only if
CONFIG_SND_SOC_ROCKCHIP is enabled.

Additionally, as the code connected to CONFIG_SND_SOC_ROCKCHIP_I2S
depends on CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM, the dependency
is moved to reflect this more clearly.

Signed-off-by: Andreas Ruprecht <rupran@einserver.de>
Reported-by: Jim Davis <jim.epost@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 19:01:18 +00:00
Jyri Sarha
bbc686b346 ASoC: tlv320aic31xx: Fix off by one error in the loop stucture.
Fix off by one read beyond the end of a table.

Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2014-11-24 18:45:57 +00:00
Lars-Peter Clausen
0cb6b1419e ASoC: wm9713: Cleanup manual bias level transitions
The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 18:44:07 +00:00
Lars-Peter Clausen
ab492b86b8 ASoC: wm9712: Cleanup manual bias level transitions
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend. This makes the code a bit shorter and cleaner.

The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 18:43:24 +00:00
Lars-Peter Clausen
a70cf928ca ASoC: wm9090: Cleanup manual bias level transitions
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.

Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 18:42:38 +00:00
Lars-Peter Clausen
68201d6998 ASoC: wm9081: Cleanup manual bias level transitions
Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 18:41:39 +00:00
Lars-Peter Clausen
aee9ffabec ASoC: wm8995: Cleanup manual bias level transitions
Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 18:41:05 +00:00
Lars-Peter Clausen
49d9ac383c ASoC: wm8994: Cleanup manual bias level transitions
Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 18:40:23 +00:00
Lars-Peter Clausen
77d05e7f81 ASoC: wm8993: Cleanup manual bias level transitions
Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 18:39:55 +00:00
Lars-Peter Clausen
497b900f83 ASoC: wm8991: Cleanup manual bias level transitions
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.

Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 18:39:21 +00:00
Lars-Peter Clausen
955efc8f50 ASoC: wm8990: Cleanup manual bias level transitions
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.

Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 18:38:54 +00:00
Lars-Peter Clausen
1f07b8de45 ASoC: wm8988: Cleanup manual bias level transitions
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner. Also remove the regcache_mark_dirty()
from the suspend handler since it is already called by the ASoC core.

Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 18:37:49 +00:00
Lars-Peter Clausen
a5dde8c42e ASoC: wm8985: Cleanup manual bias level transitions
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.

Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 18:37:15 +00:00
Lars-Peter Clausen
ed1358f508 ASoC: wm8974: Cleanup manual bias level transitions
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.

Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 18:36:19 +00:00
Lars-Peter Clausen
d02486fd42 ASoC: wm8978: Cleanup manual bias level transitions
Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 18:36:11 +00:00
Lars-Peter Clausen
387fe80fb1 ASoC: wm8983: Cleanup manual bias level transitions
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.

Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 18:35:53 +00:00
Lars-Peter Clausen
7bea32c5b2 ASoC: wm8961: Cleanup manual bias level transitions
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.

Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 18:29:48 +00:00
Lars-Peter Clausen
0a87a6e1c0 ASoC: wm8960: Cleanup manual bias level transitions
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.

Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 18:29:05 +00:00
Lars-Peter Clausen
bf68a04708 ASoC: wm8955: Cleanup manual bias level transitions
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner. Also remove the regcache_mark_dirty()
from the suspend handler since this is already done by the ASoC core.

Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 18:28:20 +00:00
Lars-Peter Clausen
5fdf082b43 ASoC: wm8940: Cleanup manual bias level transitions
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.

Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 18:27:37 +00:00
Lars-Peter Clausen
b0d55b1a63 ASoC: wm8903: Cleanup manual bias level transitions
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.

Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed. Also remove the unused codec field from the wm8903_priv
struct so we can remove the whole probe callback.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 18:27:02 +00:00
Lars-Peter Clausen
d2a9bc6851 ASoC: wm8900: Cleanup manual bias level transitions
Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 18:26:14 +00:00
Lars-Peter Clausen
a4235a14be ASoC: wm8804: Cleanup manual bias level transitions
Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 18:25:26 +00:00
Lars-Peter Clausen
6c286afb01 ASoC: wm8776: Cleanup manual bias level transitions
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.

Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 18:24:56 +00:00
Lars-Peter Clausen
d12cbf956f ASoC: wm8750: Cleanup manual bias level transitions
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.

Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 18:23:20 +00:00
Lars-Peter Clausen
67cac3a351 ASoC: wm8737: Cleanup manual bias level transitions
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.

Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 18:22:31 +00:00
Lars-Peter Clausen
2081b2cf05 ASoC: wm8731: Cleanup manual bias level transitions
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.

Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 18:21:59 +00:00
Lars-Peter Clausen
d4d41436ff ASoC: wm8728: Cleanup manual bias level transitions
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.

Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 18:20:49 +00:00
Lars-Peter Clausen
0bd324b1ad ASoC: wm8711: Cleanup manual bias level transitions
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner. Also remove the extra write that sets
the WM8711_ACTIVE register to 0x00 in the suspend handler since this write
is already done when transitioning to SND_SOC_BIAS_OFF.

Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 18:19:45 +00:00
Lars-Peter Clausen
4d0a4c3c6d ASoC: wm8580: Cleanup manual bias level transitions
Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 18:19:13 +00:00
Lars-Peter Clausen
ca5e7c6aff ASoC: wm8523: Cleanup manual bias level transitions
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.

Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 18:18:42 +00:00
Lars-Peter Clausen
99b108c73f ASoC: wm8510: Cleanup manual bias level transitions
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.

Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 18:18:08 +00:00
Lars-Peter Clausen
098f6f17c3 ASoC: wm8400: Cleanup manual bias level transitions
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.

Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

The manual asynchronous transition to SND_SOC_BIAS_STANDBY at the end of
CODEC probe() can also be removed as the core will automatically do this
after the CODEC has been probed. Also running this asynchronously has the
problem of potential race conditions with the core.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 18:17:33 +00:00
Lars-Peter Clausen
21a942fdd8 ASoC: wm8350: Cleanup manual bias level transitions
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.

Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 18:16:59 +00:00
Lars-Peter Clausen
e2dce944cc ASoC: rt5631: Cleanup bias level transitions
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.

Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 18:07:05 +00:00
Lars-Peter Clausen
5c9dc0898f ASoC: alc5632: Cleanup bias level transitions
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.

Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 18:06:44 +00:00
Lars-Peter Clausen
2849bde56a ASoC: alc5623: Cleanup bias level transitions
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner. Also remove the manual sequencing back
to SND_SOC_BIAS_ON in resume as this is already handled by the ASoC core.

Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 18:06:02 +00:00
Lars-Peter Clausen
e8125f0442 ASoC: uda1380: Cleanup manual bias level transitions
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.

Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 18:05:08 +00:00
Lars-Peter Clausen
e03b975506 ASoC: uda134x: Cleanup manual bias level transitions
Set the CODEC driver's suspend_bias_off flag rather than manually going to
SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes
the code a bit shorter and cleaner.

Since the ASoC core now takes care of setting the bias level to
SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually
anymore either.

The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe()
can also be removed as the core will automatically do this after the CODEC
has been probed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 18:04:50 +00:00
Lars-Peter Clausen
a6e4599f8d ASoC: uda134x: Remove is_powered_on_standby from platform data
According to its documentation the is_powered_on_standby field of the
uda134x platform data is supposed to prevent the the driver from shutting
down the ADC and DAC in standby mode. This behavior was broken in commit
commit f0fba2ad1b ("ASoC: multi-component - ASoC Multi-Component Support")
almost 5 years ago and all the flag does now is cause the driver to go to
SND_SOC_BIAS_ON in probe, just for the ASoC core to put it back into
SND_SOC_BIAS_STANDBY right after probe.

Apparently the intended behavior has not been missed, so just remove
is_powered_on_standby from the platform data struct.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 18:04:49 +00:00
Jarkko Nikula
418382f29d ASoC: max98090: Fix right sidetone connection
It is right not left sidetone which goes to "DACR".

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 17:14:32 +00:00
Jarkko Nikula
48826ee590 ASoC: max98090: Fix ill-defined sidetone route
Commit 5fe5b767dc ("ASoC: dapm: Do not pretend to support controls for non
mixer/mux widgets") revealed ill-defined control in a route between
"STENL Mux" and DACs in max98090.c:

max98090 i2c-193C9890:00: Control not supported for path STENL Mux -> [NULL] -> DACL
max98090 i2c-193C9890:00: ASoC: no dapm match for STENL Mux --> NULL --> DACL
max98090 i2c-193C9890:00: ASoC: Failed to add route STENL Mux -> NULL -> DACL
max98090 i2c-193C9890:00: Control not supported for path STENL Mux -> [NULL] -> DACR
max98090 i2c-193C9890:00: ASoC: no dapm match for STENL Mux --> NULL --> DACR
max98090 i2c-193C9890:00: ASoC: Failed to add route STENL Mux -> NULL -> DACR

Since there is no control between "STENL Mux" and DACs the control name must
be NULL not "NULL".

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2014-11-24 17:13:59 +00:00
Jarkko Nikula
4cf703a7bc ASoC: max98090: Fix digital microphone
Commit e409dfbfcc ("ASoC: dapm: Add a few supply widget sanity checks")
broke digital microphone support in max98090.c:

max98090 i2c-193C9890:00: Conditional paths are not supported for supply widgets (DMICL_ENA -> [DMIC] -> DMIC Mux)
max98090 i2c-193C9890:00: ASoC: no dapm match for DMICL_ENA --> DMIC --> DMIC Mux
max98090 i2c-193C9890:00: ASoC: Failed to add route DMICL_ENA -> DMIC -> DMIC Mux
max98090 i2c-193C9890:00: Conditional paths are not supported for supply widgets (DMICR_ENA -> [DMIC] -> DMIC Mux)
max98090 i2c-193C9890:00: ASoC: no dapm match for DMICR_ENA --> DMIC --> DMIC Mux
max98090 i2c-193C9890:00: ASoC: Failed to add route DMICR_ENA -> DMIC -> DMIC Mux

Problem is partially caused by commit f69e3caa9e ("ASoC: max98090: Enable
both DMIC channels also when using mono configuration") which connects
"DMICL_ENA" and "DMICR_ENA" supply widgets to "DMIC Mux".

Fix the breakage by reverting f69e3caa9e and then by adding additional
"DMICR_ENA" to "DMICL" and "DMICL_ENA" to "DMICR" cross-connections. This
disconnects these supply widgets from the mux and makes sure that both DMIC
data channels are still enabled together.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-24 17:13:42 +00:00
Benjamin Herrenschmidt
db79afa1e5 sound/radeon: Move 64-bit MSI quirk from arch to driver
A number of radeon cards have a HW limitation causing them to be
unable to generate the full 64-bit of address bits for MSIs. This
breaks MSIs on some platforms such as POWER machines.

We used to have a powerpc specific quirk to address that on a
single card, but this doesn't scale very well, this is better
put under control of the drivers who know precisely what a given
HW revision can do.

We now have a generic quirk in the PCI code. We should set it
appropriately for all radeon's from the audio driver.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
CC: <stable@vger.kernel.org>
2014-11-24 14:17:34 +11:00
Takashi Iwai
413cbf469a ALSA: hda - Limit 40bit DMA for AMD HDMI controllers
AMD/ATI HDMI controller chip models, we already have a filter to lower
to 32bit DMA, but the rest are supposed to be working with 64bit
although the hardware doesn't really work with 63bit but only with 40
or 48bit DMA.  In this patch, we take 40bit DMA for safety for the
AMD/ATI controllers as the graphics drivers does.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org>
2014-11-24 14:02:53 +11:00
Eliot Blennerhassett
51e6f47dd2 ALSA: asihpi: used parts of message/response are zeroed before use
Signed-off-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-22 22:34:06 +01:00
Eliot Blennerhassett
dc612838ea ALSA: asihpi: don't fail probe if adapter mode read fails
Only determining if low latency mode is enabled. Failure
indicates adapter has no modes

Signed-off-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-22 22:33:48 +01:00
Eliot Blennerhassett
12eb089874 ALSA: asihpi: Use standard printk helpers
Signed-off-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-22 22:33:37 +01:00
Eliot Blennerhassett
5bc91f5b3c ALSA: asihpi: Turn off msg/resp logging after DSP has crashed.
Prevents spewing of useless messages if app keeps trying to
access the card.

Signed-off-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-22 22:33:25 +01:00
Eliot Blennerhassett
f9a376c3f6 ALSA: asihpi: Add support for stream interrupt.
Some cards have a so-called low-latency mode, in which they present
a single multichannel stream with no mixing or samplerate conversion.
In this mode the card can generate an interrupt per internal processing
block (typically 32 or 64 frames)

Signed-off-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-22 22:33:13 +01:00
Eliot Blennerhassett
c1464a8854 ALSA: asihpi: Refactor control cache code.
Signed-off-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-22 22:29:58 +01:00
Eliot Blennerhassett
e51c58c982 ALSA: asihpi: Use CONFIG_64BIT directly
Signed-off-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-22 22:28:36 +01:00
Eliot Blennerhassett
35a8dc1f66 ALSA: asihpi: Logging format improvements
Signed-off-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-22 22:27:04 +01:00
Eliot Blennerhassett
3872f19d96 ALSA: asihpi: New I/O types - AVB & BLUlink, DAB Rf receiver
Audio cards wth have AVB or BLU Link IO.
Tuner card with DAB receiver

Signed-off-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-22 22:25:51 +01:00
Eliot Blennerhassett
e9886ab06c ALSA: asihpi: Minor string and dead code cleanup
Signed-off-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-22 22:25:02 +01:00
Dan Carpenter
4fc390a198 sound: oss: uart401: remove unneeded NULL check
"devc" can't be NULL here so there is no need to check.  Also I removed
the "devc = NULL" assignment because devc is stored on stack so it's
a no-op.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-22 21:48:33 +01:00
kbuild test robot
14cd792312 ASoC: Intel: chv_platform_data can be static
sound/soc/intel/sst/sst_acpi.c:135:26: sparse: symbol 'chv_platform_data' was not declared. Should it be static?

Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-21 23:17:58 +00:00
Qiao Zhou
075207d24a ASoC: soc-pcm: skip dpcm path checking with incapable/unready FE
Skip dpcm path checking for playback or capture, if corresponding FE
doesn't support playback or capture, or currently is not ready. It
can reduce the unnecessary cost to search connected widgets.

[Tweaked comments for clarity -- broonie]

Signed-off-by: Qiao Zhou <zhouqiao@marvell.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-21 19:32:07 +00:00
Mengdong Lin
bd01fdc3aa ASoC: Intel: add support for Cherrytrail and Braswell in SST driver
This patch add ACPI device ID and platform data for two Cherryview-based
platforms, Cherrytrail and Braswell. Also reuse mfld driver ops in sst driver.

Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-21 19:23:01 +00:00
Mengdong Lin
026da220c5 ASoC: Intel: Add Cherrytrail & Braswell machine driver cht_bsw_rt5672
Add machine driver for two Intel Cherryview-based platforms, Cherrytrail and
Braswell, with RT5672 codec.

Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-21 19:23:01 +00:00
Markus Elfring
966b7bc935 ALSA: sb: Deletion of unnecessary checks before two function calls
The functions release_and_free_resource() and snd_util_memhdr_free() test
whether their argument is NULL and then return immediately.
Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-21 20:07:36 +01:00
Markus Elfring
42d7721012 ALSA: es1688_lib: Deletion of an unnecessary check before the function call "release_and_free_resource"
The release_and_free_resource() function tests whether its argument is NULL
and then returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-21 20:07:13 +01:00
Markus Elfring
d712eaf29d ALSA: core: Deletion of unnecessary checks before two function calls
The functions snd_seq_oss_timer_delete() and vunmap() perform also input
parameter validation. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-21 20:06:57 +01:00
Lars-Peter Clausen
6e2793b98e ASoC: cs42l73: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-21 18:21:17 +00:00
Lars-Peter Clausen
ceb3c0683c ASoC: cs42l51: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-21 18:20:28 +00:00
Zidan Wang
e2280c9040 ASoC: wm8960: Add device tree support
Document the device tree binding for the WM8960 codec, and modify the
driver to extract the platform data from device tree, if present.

Signed-off-by: Zidan Wang <b50113@freescale.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-21 18:19:35 +00:00
Lars-Peter Clausen
1fc10044d7 ASoC: sigmadsp: Fix endianness conversion
Make sure to always convert the firmware data to local endianness before
using it.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Fixes: a35daac77a ("ASoC: sigmadsp: Add support for fw v2")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-21 18:17:50 +00:00
Lars-Peter Clausen
dee9cec42f ASoC: adau17x1: Mark DSP parameter memory as readable and precious
To be able to read back data from the DSP parameter memory the register
range needs to be marked as readable. At the same time we do not want them
to e.g. appear in debugfs output so mark them as precious as well.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-21 18:17:50 +00:00
Lars-Peter Clausen
0db5dc943e ASoC: max98095: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-21 18:17:22 +00:00
Lars-Peter Clausen
24445f8c5e ASoC: max98090: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-21 18:16:50 +00:00
Lars-Peter Clausen
0b5155bbca ASoC: max98088: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-21 18:16:17 +00:00
Lars-Peter Clausen
335ca471ee ASoC: sirf-audio-codec: Replace w->codec snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

While we are at it also replace dev_get_drvdata() with snd_soc_codec_get_drvdata().

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-21 18:15:43 +00:00
Padmavathi Venna
b2de1d20a0 ASoC: samsung: ASoC: samsung: Fix IISMOD setting in i2s_set_sysclk()
In the i2s_set_sysclk() callback we are currently clearing all bits
of the IISMOD register in i2s_set_sysclk. It's due to an incorrect
mask used for the AND operation which is introduced in commit
a5a56871f8 (ASoC: samsung:
add support for exynos7 I2S controller) and also adds the missing
break statement.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-21 18:08:13 +00:00
kbuild test robot
1a28fc190c ASoC: Intel: byt_rvp_platform_data can be static
sound/soc/intel/sst/sst_acpi.c:124:26: sparse: symbol 'byt_rvp_platform_data' was not declared. Should it be static?

Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-21 15:59:57 +00:00
Jussi Laako
d42472ecff ALSA: pcm: Add big-endian DSD sample formats and fix XMOS DSD sample format
This patch fixes XMOS DSD sample format to DSD_U32_BE and also adds
DSD_U16_BE and DSD_U32_BE sample formats.

Signed-off-by: Jussi Laako <jussi@sonarnerd.net>
Acked-by: Jurgen Kramer <gtmkramer@xs4all.nl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-21 15:13:28 +01:00
Takashi Iwai
b61f90eac1 ALSA: usb-audio: Add resume support for Scarlett mixers
Scarlett driver uses almost compatible usb_mixer_elem_info struct, so
we just need to add a couple of simple resume callbacks to handle them
accordingly.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-21 11:59:17 +01:00
Takashi Iwai
288673beae ALSA: usb-audio: Add resume support for MicroII SPDIF ctls
Like the previous fixes, the mixer accessors are converted to use
usb_mixer_elem_list objects.  In addition, the proper shutdown check
are put in get and put callbacks.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-21 11:58:52 +01:00
Takashi Iwai
0b4e9cfcef ALSA: usb-audio: Add resume support for FTU controls
A few FTU mixer controls have the own value handling, so they have to
be rewritten to follow the support for resume callbacks.  This ended
up in a fair amount of refactoring.  Its own struct is now removed,
instead the values are embedded in kctl private_value totally.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-21 11:58:19 +01:00
Takashi Iwai
da6d276957 ALSA: usb-audio: Add resume support for Native Instruments controls
The changes at this time are a bit more wider than previous ones.
Firstly, the NI controls didn't cache the values, so I had to
implement the caching.  It's stored in bit 24 of private_value.
In addition to that, the initial values have to be read from
registers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-21 11:58:14 +01:00
Takashi Iwai
25a9a4f91b ALSA: usb-audio: Add Digidesign Mbox 1 resume support
Again another quirk fix, just convert to usb_mixer_elem_list with the
resume callback for Mbox 1 stuff.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-21 11:58:08 +01:00
Takashi Iwai
2bfb14c3b8 ALSA: usb-audio: Add Xonar U1 resume support
This time it's about Xonar U1: add the proper resume support for
"Digital Playback Switch" element.

Also, the status is moved into kcontrol private_value from
usb_mixer_interface struct field.  One more cut.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-21 11:58:01 +01:00
Takashi Iwai
5f503ee9e2 ALSA: usb-audio: Add Emu0204 channel switch resume support
Similar as the previous fix, this adds the proper resume support to
Emu0202 "Front Jack Channels" enum mixer element.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-21 11:57:55 +01:00
Takashi Iwai
9cf3689bfe ALSA: usb-audio: Add audigy2nx resume support
Rewrite the code to handle LEDs on audigy2nx and co for supporting the
proper resume.  A new internal helper function
add_single_ctl_with_resume() is introduced to manage the
usb_mixer_elem_list more easily.

Also while we're at it, move audigy2nx_leds[] in usb_mixer_interface
struct into the private_value of each kctl, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-21 11:57:46 +01:00
Takashi Iwai
3360b84b8e ALSA: usb-audio: Allow quirks to handle own resume and proc dump
So far, we blindly assumed that the all usb-audio mixer elements
follow the standard and apply the standard resume method for the
registered elements in the id_elems[] list.  However, some quirks
really need the own resume and it's incomplete for now.

This patch enhances the resume handling in two folds:
- split some fields in struct usb_mixer_elem_info into a smaller
  header struct (usb_mixer_elem_list) for keeping the minimal
  information in the linked-list; the usb_mixer_elem_info embeds this
  header struct instead
- add resume and dump callbacks to usb_mixer_elem_list struct to allow
  quirks providing the own methods

For the standard mixer elements, these new callbacks are set to the
standard ones as default, thus there is no functional change by this
patch yet.

The dump and resume callbacks are typedef'ed for ease of later patches
using arrays of such function pointers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-21 11:56:58 +01:00
Hui Wang
911f632c70 ALSA: hda - One more HP machine needs to change mute led quirk
The machine originally use the quirk ALC269_FIXUP_HP_GPIO_MIC1_LED,
but the LED doesn't work at all.

After this change, the machine will change to use
ALC269_FIXUP_HP_MUTE_LED_MIC1 through pin_fixup_tbl[], and the LED
works well.

BugLink: https://bugs.launchpad.net/bugs/1389497
Tested-by: TieFu Chen <tienfu.chen@canonical.com>
Cc: Kailang Yang <kailang@realtek.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-21 10:58:08 +01:00
Kailang Yang
eaa8e5ef18 ALSA: hda/realtek - Supported HP mute Led for ALC286
New HP machine supported output mute led and input mute led.
ALC286:
GPIO1 to control output mute led.
GPIO5 to control input mute led.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-21 10:56:52 +01:00
Takashi Iwai
5aeee3424f ALSA: usb-audio: Refactor ignore_ctl_error checks
Introduce an internal helper macro for avoiding many open codes.

The only slight behavior change is in a couple of get ballcks where
the value is reset at error no matter whether ignore_ctl_error is set
or not.  Actually this is even safer than before.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-20 21:46:32 +01:00
Takashi Iwai
a69862d8d0 Merge branch 'for-linus' into test/usb-resume 2014-11-20 21:46:04 +01:00
Takashi Iwai
01cb156edb ALSA: usb-audio: Use snd_usb_ctl_msg() for Native Instruments quirk
snd_nativeinstruments_control_get() uses a stack as a buffer for
usb_control_msg(), but it's basically not allowed.  Replace the call
with a safer helper, snd_usb_ctl_msg(), instead.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-20 21:44:49 +01:00
Takashi Iwai
0f32fd1900 ALSA: hda/realtek - Clean up mute/mic GPIO LED handling
There are a few duplicated codes handling the mute and mic-mute LEDs
via GPIO pins.  Let's consolidate to single helpers.  Here we
introduced two new fields to alc_spec, gpio_mute_led_mask and
gpio_mic_led_mask, to contain the bit mask to set/clear.  Also,
mute_led_polarity is evaluated as well.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-20 11:02:18 +01:00
Lars-Peter Clausen
a3a1ec66d6 ASoC: adau1701: Implement sigmadsp safeload
The safeload feature allows to load up to 5 parameter memory registers
atomically. This is helpful for switching between e.g. filter settings
without causing any glitches.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-20 09:55:35 +00:00
Lars-Peter Clausen
a35daac77a ASoC: sigmadsp: Add support for fw v2
This patch adds support for the v2 version of the SigmaDSP firmware file
format. The new format has support for having different program and
parameter settings for different samplerates. In addition it stores metadata
describing the firmware. This metadata includes the set of supported
samplerates which will be used to restrict the samplerates that can be
selected by userspace. Also included is information about the modifiable
parameters. Those will be exposed as ALSA controls so they can be changed at
runtime.

The new format is based on a binary type-length-value structure that makes
it both forward and backwards compatible.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-20 09:55:34 +00:00
Lars-Peter Clausen
d48b088e3e ASoC: sigmadsp: Restructure in preparation for fw v2 support
The v2 file format of the SigmaDSP takes a more declarative style compared
to the imperative style of the v1 format. In addition some features that are
supported with v2 require the driver to keep state around for the firmware.
This requires a bit of restructuring of both the firmware loader itself and
the drivers making use of the firmware loader.

Instead of loading and executing the firmware in place when the DSP is
configured the firmware is now loaded at driver probe time. This is required
since the new firmware format will in addition to the firmware data itself
contain meta information describing the firmware and its requirements and
capabilities. Those will for example be used to restrict the supported
samplerates advertised by the driver to userspace to the list of samplerates
supported for the firmware.

This only does the restructuring required by the v2 format, but does not
yet add support for the new format itself.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-20 09:55:34 +00:00
Lars-Peter Clausen
6b25730f68 ASoC: sigmadsp: Drop support support SIGMA_ACTION_DELAY
The official firmware generation tool never emitted any SIGMA_ACTION_DELAY
instructions. Keeping support for it with the new restructured loader that
also supports v2 will be difficult, so drop support for it.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-20 09:55:33 +00:00
Lars-Peter Clausen
50c0f21b42 ASoC: sigmadsp: Refuse to load firmware files with a non-supported version
Make sure to check the version field of the firmware header to make sure to
not accidentally try to parse a firmware file with a different layout.
Trying to do so can result in loading invalid firmware code to the device.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2014-11-20 09:55:29 +00:00
Subhransu S. Prusty
996cc8494d ASoC: Intel: add BYTCR machine driver with RT5640
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-19 17:49:44 +00:00
Vinod Koul
92a6e2a227 ASoC: Intel: cleanup runtime_pm initialization
For ACPI we missed to pm_runtime_enable() call which is required to tell PM
core that runtime on this device is enabled now. Since this is common to
both PCI and APCI move it out. Also for ACPI we do not require
pm_runtime_allow() call, so remove that

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-19 10:56:46 +00:00
Lars-Peter Clausen
17bb577328 ASoC: ad1980: Remove ac97_read/ac97_write wrappers
Since the regmap conversion ac97_read/ac97_write are just simple wrappers
around snd_soc_read/snd_soc_write. Use those instead directly and remove the
wrappers.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-19 10:49:18 +00:00
Lars-Peter Clausen
82d1463641 ASoC: ad1980: Convert to regmap
This patch converts the ad1980 driver to use regmap for its IO.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-19 10:49:18 +00:00
Mark Brown
e975cec295 Merge branch 'topic/regmap' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-ac97 2014-11-19 10:48:20 +00:00
Lars-Peter Clausen
20feb88198 ASoC: Add helper functions for deferred regmap setup
Some drivers (most notably the AC'97 drivers) do not have access to their
regmap struct when the component/codec is registered. For those drivers the
automatic regmap setup will not work and needs to be done manually,
typically from the component/CODEC drivers probe callback.

This patch adds a set of helper function to handle deferred regmap
initialization as well as early regmap tear-down.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-19 10:46:03 +00:00
Oder Chiou
683996cb22 ASoC: rt5677: Set the slow charge of the vref in the end of the power sequences
Set the slow charge of the vref in the end of the power sequences

Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-19 10:18:05 +00:00
Oder Chiou
35d40d10e9 ASoC: rt5677: Follow the gpio naming rule to rename the irq function
Follow the gpio naming rule to rename the irq function.

Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-19 10:18:05 +00:00
Oder Chiou
2dfe2b08d2 ASoC: rt5677: Align the reg_default table with tab character
Align the reg_default table with tab character

Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-19 10:18:05 +00:00
Charles Keepax
00e4c3b6e2 ASoC: wm_adsp: Move core_ena to be co-located with start bit
Many firmwares do not wait for the start bit before they begin
processing audio, whilst this is a bug on the firmware side there are
too many such firmwares in the wild to ignore the situation. This patch
moves the core enable to happen at same time as the start, the firmware
looses the ability to overlap its own startup with the audio path bring
up but we ensure that all firmwares behave.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-18 17:27:02 +00:00
Takashi Sakamoto
5f217f905b ALSA: firewire-lib: fix kerneldoc errors
Complete missing parameters, correct wrong reference, and add an explaination
about the differences between the latest specification and our implementation.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-18 18:10:23 +01:00
JS Park
d6d521799f ASoC: wm_adsp: Fix memory leak in wm_adsp_setup_algs
Signed-off-by: JS Park <aitdark.park@samsung.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-18 16:21:15 +00:00
Sudip Mukherjee
a5a267cf9c ASoC: rt286: build warning of section mismatch
while building we were getting the following build warning:

Section mismatch in reference from the function rt286_i2c_probe()
to the variable .init.data:force_combo_jack_table
The function rt286_i2c_probe() references
the variable __initdata force_combo_jack_table.
This is often because rt286_i2c_probe lacks a __initdata
annotation or the annotation of force_combo_jack_table is wrong.

we were getting the warning as force_combo_jack_table was marked
with __initdata

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-18 15:40:18 +00:00
Lars-Peter Clausen
358a8bb562 ASoC: ac97: Push snd_ac97 pointer to the driver level
Now that the ASoC core no longer needs a handle to the AC'97 device that is
associated with a CODEC we can remove it from the snd_soc_codec struct and
push it into the individual driver state structs like we do for other
communication buses. Doing so creates a clean separation between the AC'97
bus support and the ASoC core.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-18 15:38:03 +00:00
Lars-Peter Clausen
bc26321404 ASoC: Rename snd_soc_dai_driver struct ac97_control field to bus_control
Setting the ac97_control field on a CPU DAI tells the ASoC core that this
DAI in addition to audio data also transports control data to the CODEC.
This causes the core to suspend the DAI after the CODEC and resume it before
the CODEC so communication to the CODEC is still possible. This is not
necessarily something that is specific to AC'97 and can be used by other
buses with the same requirement. This patch renames the flag from
ac97_control to bus_control to make this explicit.

While we are at it also change the type from int to bool.

The following semantich patch was used for automatic conversion of the
drivers:
// <smpl>
@@
identifier drv;
@@
struct snd_soc_dai_driver drv = {
-	.ac97_control
+	.bus_control
	=
-	1
+	true
};
// </smpl>

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-18 15:38:03 +00:00
Lars-Peter Clausen
4bafcf074a ASoC: Drop ac97_control initialization from CODEC driver DAIs
This is no longer necessary as there is no code anymore that uses this for
CODEC DAIs.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-18 15:37:59 +00:00
Lars-Peter Clausen
6794f709b7 ASoC: ac97: Drop delayed device registration
We have all the information and dependencies we need to initialize and
register the device available in snd_soc_new_ac97_codec(). So there is no
need to delay the device registration until after the card itself as been
registered.

This makes the code significantly simpler and also makes it possible to use
the AC'97 device in the CODECs probe function. The later will be required to
be able to convert the AC'97 CODEC drivers to regmap.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-18 15:37:58 +00:00
Lars-Peter Clausen
ca005f324e ASoC: ac97: Drop support for setting platform data via the CPU DAI
This has no users since commit f0fba2ad1b ("ASoC: multi-component - ASoC
Multi-Component Support") which was almost 5 years ago. Given that this runs
after CODEC probe functions have been run it also doesn't seem to be that
useful.

So drop it altogether to make the code simpler.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-18 15:37:58 +00:00
Lars-Peter Clausen
bdfd60e3c0 ASoC: ac97: Merge soc_ac97_dev_{un,}register()/soc_{un,}register_ac97_codec()
soc_{un,}register_ac97_codec() is just a simple wrapper around
soc_ac97_dev_{un,}register(). There is no need to split these up into two
different sets of functions.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-18 15:37:57 +00:00
Lars-Peter Clausen
eda1a701fd ASoC: ac97: Use static ac97_bus
We always pass soc_ac97_ops to snd_soc_new_ac97_codec(). So instead of
allocating a snd_ac97_bus in snd_soc_new_ac97_codec() just use a static one
that gets initialized when snd_soc_set_ac97_ops() is called.

Also drop the device number parameter from snd_soc_new_ac97_codec(). We
currently only support one device per bus and all drivers pass 0 for the
device number. And if we should ever support multiple devices per bus it
wouldn't be up to individual AC'97 device drivers to pick their number, but
rather either the AC'97 adapter driver or the core code will assign them.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-18 15:37:46 +00:00
Lars-Peter Clausen
336b8423e2 ASoC: Move AC'97 support to its own file
Currently the AC'97 support is splattered all throughout soc-core.c. Some
parts are #ifdef'd some parts are not. This patch moves the AC'97 support to
its own file, this should make the code a bit more clearer and also makes it
possible to easily not compile it into the kernel when not needed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-18 15:26:06 +00:00
Lars-Peter Clausen
70f3af3ca1 ASoC: Properly handle AC'97 device lifetime management
The memory that a struct device is contained in must not be freed except
from within the device's release callback. The ASoC code currently does not
adhere to this rule for the AC'97 device. This patch fixes it by moving the
freeing of the AC'97 to the release callback and splitting up the
registration and unregistration of the device into separate steps for
getting/putting the reference to the device and adding/removing it to the
device hierarchy.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-18 15:26:05 +00:00
Lars-Peter Clausen
65c72efd1e ASoC: mpc5200_dma: Don't overwrite ac97 device private_data
The mpc5200_dma overwrites the private_data field of the CODEC's AC'97
device with the DMA drivers private data, but never actually reads it again.
Given that the private_data field is supposed to be owned by the AC'97
driver, overwriting it may cause undefined behavior. This patch removes the
code that overwrites the field from the driver.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-18 15:26:05 +00:00
Lars-Peter Clausen
35480e3536 ASoC: mpc5200_psc_ac97: Remove unused on-stack snd_ac97 device
The mpc5200_psc_ac97 driver puts a snd_ac97 device on the stack in the
driver probe function, initializes the private data member of the device and
the never uses the device again. It should be safe to remove it.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-18 15:26:05 +00:00
Mark Brown
92eb0d5465 Merge branches 'topic/ad1980', 'topic/wm9705' and 'topic/wm971x' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-ac97 2014-11-18 15:25:56 +00:00
Masanari Iida
bb29a93b38 ASoC: jack: Fix warning while make htmldocs caused by soc-jack.c
This patch fix following errors while "make htmldocs" on
linux-next-20141110.

Warning(.//sound/soc/soc-jack.c:126): No description found for
parameter 'zones'
Warning(.//sound/soc/soc-jack.c:126): Excess function parameter
'zone' description in 'snd_soc_jack_add_zones'

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-18 15:01:31 +00:00
Hui Wang
6676f3081f ALSA: hda - fix the mic mute led problem for Latitude E5550
The microphone mute led on the Latitude E5550 can't work. We need to
apply DELL_WMI_MIC_MUTE_LED quirk to this machine.

The machine uses alc293 codec and already applied the quirk
ALC293_FIXUP_DELL1_MIC_NO_PRESENCE through pin_fixup_tbl[].

Here we just let DELL_WMI_MIC_MUTE_LED be chained to
ALC269_FIXUP_HEADSET_MODE, then the machine will have these
quirks ALC293_FIXUP_DELL1_MIC_NO_PRESENCE-->
ALC269_FIXUP_HEADSET_MODE-->ALC255_FIXUP_DELL_WMI_MIC_MUTE_LED.

BugLink: https://bugs.launchpad.net/bugs/1381856
Reported-and-tested-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-18 11:06:03 +01:00
Hui Wang
4a83d42ae2 ALSA: hda - move DELL_WMI_MIC_MUTE_LED to the tail in the quirk chain
We have one more Dell machine needs DELL_WMI_MIC_MUTE_LED quirk, but
the machine uses alc293 instead of alc255. So if
DELL_WMI_MIC_MUTE_LED still chain ALC255_FIXUP_DELL1_MIC_NO_PRESENCE,
the machine can't use this quirk.

To change this situation, let the DELL_WMI_MIC_MUTE_LED to be a
standalone quirk, and let other quirks chain it.

After this change, this quirk can be chained to any existing quirks,
and as a result, it is possible that this quirk is applied to
a non-Dell machine or a Dell machine without mic mute led on it, but
it is still safe since alc_fixup_dell_wmi() will return an error in
these situations.

And remove the quirk for machine with subsystem id 0x6010 and 0x601f,
these two machines will fall back to the quirk
ALC255_FIXUP_DELL1_MIC_NO_PRESENCE-->ALC255_FIXUP_HEADSET_MODE-->
ALC255_FIXUP_DELL_WMI_MIC_MUTE_LED through pin_fixup_tbl[].

BugLink: https://bugs.launchpad.net/bugs/1381856
Reported-and-tested-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-18 11:05:45 +01:00
Markus Elfring
bb66f2dc19 ASoC: omap-mcbsp: Deletion of an unnecessary check before the function call "kfree"
The kfree() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-17 23:52:34 +00:00
Fabio Estevam
7e35ac8159 ASoC: fsl_ssi: Remove comment about SSI running only in slave mode
Current driver can also run in I2S master mode, so remove the old comment.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Timur Tabi <timur@tabi.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-17 23:30:21 +00:00
Oder Chiou
86ae04b174 ASoC: rt5677: Modify the default value of the MX-8E[4] for ASRC function
Modify the default value of the MX-8E[4] to 1 for ASRC function. It could
prevent the pop noise with ASRC function.

Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-17 23:29:31 +00:00
Takashi Iwai
39ae97ea4b ASoC: Fixes for v3.18
As well as the usual driver fixes there's a few other things here:
 
 One is a fix for a race in DPCM which is unfortuantely a rather large
 diffstat, this is the result of growing usage of the mainline code and
 hence more detailed testing so I'm relatively happy.
 
 The other is a fix for non-DT machine driver matching following some of
 the componentization work which is much more focused.
 
 Both have had a while to cook in -next.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUaifFAAoJECTWi3JdVIfQ9V0H/iE0R+vu2VyvTPt9PXcWNn2N
 zCwwljFEc9p2tAKqCHXkq2JDZZDIUQBxQPMJF7m43iQ+JGg/6BjPnPCdNJsi7hZV
 /prLtMUPhdExxRL/mdfvIS26FTHF3GhOZvE4ePAw/jJWlCCMWGt3iEruuoeDzbxg
 TwHTlgVqBKcdDAAMe1kTkBCTcamt8SaLYOaAgICICJtwO6AFpf8UYrYnT4Y9l1XK
 jOAPjfLNOtuIh0IKp7NBJlIdV3PZPpnx7l1wg8DN+63kwLStFrQjYvueu1UAArh8
 Y65oQpkIxgqlJOvy59fY3J3F5HF9u6dWjtQv5wMOJm0Fr4y2GP+EsaHBlPYM0co=
 =8pIU
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v3.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v3.18

As well as the usual driver fixes there's a few other things here:

One is a fix for a race in DPCM which is unfortuantely a rather large
diffstat, this is the result of growing usage of the mainline code and
hence more detailed testing so I'm relatively happy.

The other is a fix for non-DT machine driver matching following some of
the componentization work which is much more focused.

Both have had a while to cook in -next.
2014-11-17 22:16:03 +01:00
Mark Brown
cf9a7f7823 Merge remote-tracking branches 'asoc/fix/rt5670', 'asoc/fix/samsung' and 'asoc/fix/sgtl5000' into asoc-linus 2014-11-17 16:41:11 +00:00
Mark Brown
643aa2c595 Merge remote-tracking branches 'asoc/fix/adsp', 'asoc/fix/cs41l51', 'asoc/fix/dpcm', 'asoc/fix/es8328', 'asoc/fix/fsl-asrc', 'asoc/fix/max98090', 'asoc/fix/rcar', 'asoc/fix/rockchip' and 'asoc/fix/rt5645' into asoc-linus 2014-11-17 16:41:06 +00:00
Mark Brown
a9aa32c542 Merge remote-tracking branch 'asoc/fix/core' into asoc-linus 2014-11-17 16:41:05 +00:00
Mark Brown
c117b4a39b Merge branch 'fix/davinci' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-davinci 2014-11-17 16:40:27 +00:00
Krishna Mohan Dani
187024b36c ASoC: rt5631: Fixing compilation warning when DT is disabled
Fixes the following compilation warning:
Warning: 'rt5631_i2c_dt_ids' defined but not used - when DT is not used.

Signed-off-by: Claude Youn <claude.youn@gmail.com>
Signed-off-by: Krishna Mohan Dani <krishna.md@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-17 14:51:40 +00:00
Charles Keepax
9da7a5a9fd ASoC: wm_adsp: Avoid attempt to free buffers that might still be in use
We should not free any buffers associated with writing out coefficients
to the DSP until all the async writes have completed. This patch updates
the out of memory path when allocating a new buffer to include a call to
regmap_async_complete.

Reported-by: JS Park <aitdark.park@samsung.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2014-11-17 14:22:04 +00:00
Johan Rastén
a358a0ef86 ALSA: usb-audio: Set the Control Selector to SU_SELECTOR_CONTROL for UAC2
Specified in section 5.2.5.6.1 of the USB Audio Class 2.0 definition.

Solves the following error for C-Media 6632A (Asus Xonar U7):
[ 8219.676164] cannot get ctl value: req = 0x81, wValue = 0x0, wIndex = 0x1400, type = 3

Signed-off-by: Johan Rastén <johan@oljud.se>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-17 14:01:24 +01:00
Markus Elfring
1ea7a568c6 ALSA: powermac: Deletion of an unnecessary check before the function call "pci_dev_put"
The pci_dev_put() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-17 13:52:45 +01:00
Markus Elfring
c283661018 ALSA: hdsp: Deletion of an unnecessary check before the function call "release_firmware"
The release_firmware() function tests whether its argument is NULL and then
return immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-17 13:46:46 +01:00
Markus Elfring
6da95e1ea8 ALSA: lola: Deletion of an unnecessary check before the function call "vfree"
The vfree() function performs also input parameter validation. Thus the test
around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-17 13:46:23 +01:00
Markus Elfring
ae1b22658e ALSA: ice17xx: Deletion of unnecessary checks before the function call "snd_ac97_resume"
The snd_ac97_resume() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-17 13:45:51 +01:00
Markus Elfring
f0acd28c87 ALSA: hda: Deletion of unnecessary checks before two function calls
The functions kfree() and release_firmware() test whether their argument
is NULL and then return immediately. Thus the test around the call
is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-17 13:45:23 +01:00
Dmitry Eremin-Solenikov
6d3efa4079 ASoC: pxa: prepare/unprepare clocks in pxa-ssp
Change clk_enable/disable() calls to clk_prepare_enable() and
clk_disable_unrepapre().

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-17 11:00:55 +00:00
Mengdong Lin
eb826a35d2 ASoC: Intel: add missing ACPI device table
The ACPI device table will generate the driver module alias for
Intel audio devices enumerated from ACPI.

Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-17 10:57:12 +00:00
Lars-Peter Clausen
d69db7f7cd ASoC: adau17x1: Replace w->codec with snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-17 10:27:55 +00:00
Lars-Peter Clausen
de172051af ASoC: adau1373: Replace w->codec with snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-17 10:27:11 +00:00
Lars-Peter Clausen
6fdaac1c1a ASoC: adav80x: Replace w->codec with snd_soc_dapm_to_codec(w->dapm)
The codec field of the snd_soc_widget struct is eventually going to be
removed, use snd_soc_dapm_to_codec(w->dapm) instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-17 10:24:29 +00:00
Jurgen Kramer
6e84a8d7ac ALSA: usb-audio: Add ctrl message delay quirk for Marantz/Denon devices
This patch adds a USB control message delay quirk for a few specific Marantz/Denon
devices. Without the delay the DACs will not work properly and produces the
following type of messages:

Nov 15 10:09:21 orwell kernel: [   91.342880] usb 3-13: clock source 41 is not valid, cannot use
Nov 15 10:09:21 orwell kernel: [   91.343775] usb 3-13: clock source 41 is not valid, cannot use

There are likely other Marantz/Denon devices using the same USB module which exhibit the
same problems. But as this cannot be verified I limited the patch to the devices
I could test.

The following two devices are covered by this path:
- Marantz SA-14S1
- Marantz HD-DAC1

Signed-off-by: Jurgen Kramer <gtmkramer@xs4all.nl>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-16 09:48:34 +01:00
Charles Keepax
cdcd7f7287 ASoC: wm_adsp: Use vmalloc to allocate firmware download buffer
Use vmalloc to allocate the buffer for firmware/coefficient download and
rely on the SPI core to split this up into DMA-able chunks. This should
give better performance and means we no longer need to manually split
the download into page size chunks to avoid allocating overly large
continuous memory regions.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-14 17:32:25 +00:00
Sudip Mukherjee
b8eca77e54 ALSA: ice1712: consider error value
earlier we were ignoring the return value of snd_ak4114_create and
always returning 0.
now we are returning the actual status. revo_init is calling this
function, and revo_init is checking the return value.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-14 14:16:47 +01:00
Sudip Mukherjee
b393df0145 ALSA: ice1712: remove unused variable
buf_size was initialized with snd_pcm_lib_buffer_bytes,
but never used. and so it is safe to be deleted.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-14 14:16:43 +01:00
Sudip Mukherjee
387417b562 ALSA: ice1712: remove unneeded return statement
the functions:
        snd_ice1712_akm4xxx_build_controls
        snd_ice1712_build_pro_mixer
        snd_ctl_add
        snd_ak4114_build
        prodigy192_ak4114_init
        snd_ak4113_build
are all returning either 0 or a negetive error value.
so we can easily remove the check for a negative value and return
the value instead.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-14 14:16:36 +01:00
Bard Liao
044b724ada ASoC: rt5670: make bias level more reasonable
This patah separate bias level off to standby and off. The standby
level will provide the necessary power for JD and push button
functions.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-14 11:11:34 +00:00
Vinod Koul
336cfbb05e ASoC: Intel: mrfld- add ACPI module
Add the last ACPI module support which also uses core module like the PCI
part

Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-14 11:07:43 +00:00
Dylan Reid
2880fc8779 ASoC: add TI ts3a227e headset chip driver
The TS3A227E is an autonomous audio accessory detection and
configuration switch that detects 3-pole or 4-pole audio accessories
and configures internal switches to route the signals accordingly.

This chip also has built-in support for the new button standard
described in the Android "Wired audio headset specification" v1.0.
These buttons will be reported on the jack as buttons 0-3 mapped to
KEY_MEDIA, KEY_VOLUMEUP, KEY_VOLUMEDOWN, and KEY_VOICE_COMMAND.

This will be added as an aux_dev and have the jack passed in from the
machine driver.

Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-14 10:46:41 +00:00
Bard Liao
471f208af9 ASoC: rt5645: two jacks for hp and mic
Some OS need headphone and microphone to be separated.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-14 10:44:03 +00:00
Fabio Estevam
c251ea7bd7 ASoC: sgtl5000: Fix SMALL_POP bit definition
On a mx28evk with a sgtl5000 codec we notice a loud 'click' sound  to happen
5 seconds after the end of a playback.

The SMALL_POP bit should fix this, but its definition is incorrect:
according to the sgtl5000 manual it is bit 0 of CHIP_REF_CTRL register, not
bit 1.

Fix the definition accordingly and enable the bit as intended per the code
comment.

After applying this change, no loud 'click' sound is heard after playback

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2014-11-14 10:35:45 +00:00