CONFIG_PPC64_BOOT_WRAPPER is selected by CPU_LITTLE_ENDIAN which is
used to compile support for other platforms such as Microwatt. There
is no need for OPAL calls on these.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211011070356.99952-1-clg@kaod.org
max_mapnr is used by virt_addr_valid() to check if a linear
address is valid.
It must only include lowmem PFNs, like other architectures.
Problem detected on a system with 1G mem (Only 768M are mapped), with
CONFIG_DEBUG_VIRTUAL and CONFIG_TEST_DEBUG_VIRTUAL, it didn't report
virt_to_phys(VMALLOC_START), VMALLOC_START being 0xf1000000.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/77d99037782ac4b3c3b0124fc4ae80ce7b760b05.1634035228.git.christophe.leroy@csgroup.eu
Patch adds support to include Sampled Instruction Address Register
(SIAR) and Sampled Data Address Register (SDAR) SPRs as part of extended
registers. Update the definition of PERF_REG_PMU_MASK_300/31 and
PERF_REG_EXTENDED_MAX to include these SPR's.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Kajol Jain<kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211007065505.27809-4-atrajeev@linux.vnet.ibm.com
PERF_REG_PMU_MASK_300 and PERF_REG_PMU_MASK_31 defines the mask
value for extended registers. Current definition of these mask values
uses hex constant and does not use registers by name, making it less
readable. Patch refactor the macro values by or'ing together the actual
register value constants. Also include PERF_REG_EXTENDED_MAX as
part of enum definition.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Kajol Jain<kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211007065505.27809-2-atrajeev@linux.vnet.ibm.com
This comment likely refers to the obsolete DLPAR workflow where some
resource state transitions were driven more directly from user space
utilities, but it also seems to contradict itself: "Change isolate state to
Isolate [...]" is at odds with the preceding sentences, and it does not
relate at all to the code that follows.
Remove it to prevent confusion.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210927201933.76786-5-nathanl@linux.ibm.com
The core DLPAR code supports two actions (add and remove) and three
subtypes of action:
* By DRC index: the action is attempted on a single specified resource.
This is the usual case for processors.
* By indexed count: the action is attempted on a range of resources
beginning at the specified index. This is implemented only by the memory
DLPAR code.
* By count: the lower layer (CPU or memory) is responsible for locating the
specified number of resources to which the action can be applied.
I cannot find any evidence of the "by count" subtype being used by drmgr or
qemu for processors. And when I try to exercise this code, the add case
does not work:
$ ppc64_cpu --smt ; nproc
SMT=8
24
$ printf "cpu remove count 2" > /sys/kernel/dlpar
$ nproc
8
$ printf "cpu add count 2" > /sys/kernel/dlpar
-bash: printf: write error: Invalid argument
$ dmesg | tail -2
pseries-hotplug-cpu: Failed to find enough CPUs (1 of 2) to add
dlpar: Could not handle DLPAR request "cpu add count 2"
$ nproc
8
$ drmgr -c cpu -a -q 2 # this uses the by-index method
Validating CPU DLPAR capability...yes.
CPU 1
CPU 17
$ nproc
24
This is because find_drc_info_cpus_to_add() does not increment drc_index
appropriately during its search.
This is not hard to fix. But the _by_count() functions also have the
property that they attempt to roll back all prior operations if the entire
request cannot be satisfied, even though the rollback itself can encounter
errors. It's not possible to provide transaction-like behavior at this
level, and it's undesirable to have code that can only pretend to do that.
Any users of these functions cannot know what the state of the system is in
the error case. And the error paths are, to my knowledge, impossible to
test without adding custom error injection code.
Summary:
* This code has not worked reliably since its introduction.
* There is no evidence that it is used.
* It contains questionable rollback behaviors in error paths which are
difficult to test.
So let's remove it.
Fixes: ac71380071 ("powerpc/pseries: Add CPU dlpar remove functionality")
Fixes: 90edf184b9 ("powerpc/pseries: Add CPU dlpar add functionality")
Fixes: b015f6bc95 ("powerpc/pseries: Add cpu DLPAR support for drc-info property")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210927201933.76786-4-nathanl@linux.ibm.com
If, due to bugs elsewhere, we get into unregister_cpu_online() with a CPU
that isn't marked hotpluggable, we can emit a warning and return an
appropriate error instead of crashing.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210927201933.76786-3-nathanl@linux.ibm.com
On pseries, cache nodes in the device tree can be added and removed by the
CPU DLPAR code as well as the partition migration (mobility) code. PowerVM
partitions in dedicated processor mode typically have L2 and L3 cache
nodes.
The CPU DLPAR code has the following shortcomings:
* Cache nodes returned as siblings of a new CPU node by
ibm,configure-connector are silently discarded; only the CPU node is
added to the device tree.
* Cache nodes which become unreferenced in the processor removal path are
not removed from the device tree. This can lead to duplicate nodes when
the post-migration device tree update code replaces cache nodes.
This is long-standing behavior. Presumably it has gone mostly unnoticed
because the two bugs have the property of obscuring each other in common
simple scenarios (e.g. remove a CPU and add it back). Likely you'd notice
only if you cared to inspect the device tree or the sysfs cacheinfo
information.
Booted with two processors:
$ pwd
/sys/firmware/devicetree/base/cpus
$ ls -1d */
l2-cache@2010/
l2-cache@2011/
l3-cache@3110/
l3-cache@3111/
PowerPC,POWER9@0/
PowerPC,POWER9@8/
$ lsprop */l2-cache
l2-cache@2010/l2-cache
00003110 (12560)
l2-cache@2011/l2-cache
00003111 (12561)
PowerPC,POWER9@0/l2-cache
00002010 (8208)
PowerPC,POWER9@8/l2-cache
00002011 (8209)
$ ls /sys/devices/system/cpu/cpu0/cache/
index0 index1 index2 index3
After DLPAR-adding PowerPC,POWER9@10, we see that its associated cache
nodes are absent, its threads' L2+L3 cacheinfo is unpopulated, and it is
missing a cache level in its sched domain hierarchy:
$ ls -1d */
l2-cache@2010/
l2-cache@2011/
l3-cache@3110/
l3-cache@3111/
PowerPC,POWER9@0/
PowerPC,POWER9@10/
PowerPC,POWER9@8/
$ lsprop PowerPC\,POWER9@10/l2-cache
PowerPC,POWER9@10/l2-cache
00002012 (8210)
$ ls /sys/devices/system/cpu/cpu16/cache/
index0 index1
$ grep . /sys/kernel/debug/sched/domains/cpu{0,8,16}/domain*/name
/sys/kernel/debug/sched/domains/cpu0/domain0/name:SMT
/sys/kernel/debug/sched/domains/cpu0/domain1/name:CACHE
/sys/kernel/debug/sched/domains/cpu0/domain2/name:DIE
/sys/kernel/debug/sched/domains/cpu8/domain0/name:SMT
/sys/kernel/debug/sched/domains/cpu8/domain1/name:CACHE
/sys/kernel/debug/sched/domains/cpu8/domain2/name:DIE
/sys/kernel/debug/sched/domains/cpu16/domain0/name:SMT
/sys/kernel/debug/sched/domains/cpu16/domain1/name:DIE
When removing PowerPC,POWER9@8, we see that its cache nodes are left
behind:
$ ls -1d */
l2-cache@2010/
l2-cache@2011/
l3-cache@3110/
l3-cache@3111/
PowerPC,POWER9@0/
When DLPAR is combined with VM migration, we can get duplicate nodes. E.g.
removing one processor, then migrating, adding a processor, and then
migrating again can result in warnings from the OF core during
post-migration device tree updates:
Duplicate name in cpus, renamed to "l2-cache@2011#1"
Duplicate name in cpus, renamed to "l3-cache@3111#1"
and nodes with duplicated phandles in the tree, making lookup behavior
unpredictable:
$ lsprop l[23]-cache@*/ibm,phandle
l2-cache@2010/ibm,phandle
00002010 (8208)
l2-cache@2011#1/ibm,phandle
00002011 (8209)
l2-cache@2011/ibm,phandle
00002011 (8209)
l3-cache@3110/ibm,phandle
00003110 (12560)
l3-cache@3111#1/ibm,phandle
00003111 (12561)
l3-cache@3111/ibm,phandle
00003111 (12561)
Address these issues by:
* Correctly processing siblings of the node returned from
dlpar_configure_connector().
* Removing cache nodes in the CPU remove path when it can be determined
that they are not associated with other CPUs or caches.
Use the of_changeset API in both cases, which allows us to keep the error
handling in this code from becoming more complex while ensuring that the
device tree cannot become inconsistent.
Fixes: ac71380071 ("powerpc/pseries: Add CPU dlpar remove functionality")
Fixes: 90edf184b9 ("powerpc/pseries: Add CPU dlpar add functionality")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210927201933.76786-2-nathanl@linux.ibm.com
vcpu_is_preempted() can be used outside of preempt-disabled critical
sections, yielding warnings such as:
BUG: using smp_processor_id() in preemptible [00000000] code: systemd-udevd/185
caller is rwsem_spin_on_owner+0x1cc/0x2d0
CPU: 1 PID: 185 Comm: systemd-udevd Not tainted 5.15.0-rc2+ #33
Call Trace:
[c000000012907ac0] [c000000000aa30a8] dump_stack_lvl+0xac/0x108 (unreliable)
[c000000012907b00] [c000000001371f70] check_preemption_disabled+0x150/0x160
[c000000012907b90] [c0000000001e0e8c] rwsem_spin_on_owner+0x1cc/0x2d0
[c000000012907be0] [c0000000001e1408] rwsem_down_write_slowpath+0x478/0x9a0
[c000000012907ca0] [c000000000576cf4] filename_create+0x94/0x1e0
[c000000012907d10] [c00000000057ac08] do_symlinkat+0x68/0x1a0
[c000000012907d70] [c00000000057ae18] sys_symlink+0x58/0x70
[c000000012907da0] [c00000000002e448] system_call_exception+0x198/0x3c0
[c000000012907e10] [c00000000000c54c] system_call_common+0xec/0x250
The result of vcpu_is_preempted() is always used speculatively, and the
function does not access per-cpu resources in a (Linux) preempt-unsafe way.
Use raw_smp_processor_id() to avoid such warnings, adding explanatory
comments.
Fixes: ca3f969dcb ("powerpc/paravirt: Use is_kvm_guest() in vcpu_is_preempted()")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210928214147.312412-3-nathanl@linux.ibm.com
Add comments more clearly documenting that this function determines whether
hypervisor-level preemption of the VM has occurred.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210928214147.312412-2-nathanl@linux.ibm.com
When check_kvm_guest() succeeds in looking up a /hypervisor OF node, it
returns without performing a matching put for the lookup, leaving the
node's reference count elevated.
Add the necessary call to of_node_put(), rearranging the code slightly to
avoid repetition or goto.
Fixes: 107c55005f ("powerpc/pseries: Add KVM guest doorbell restrictions")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210928124550.132020-1-nathanl@linux.ibm.com
While investigating a lockup at startup on Powerbook 3400C, it was
identified that the fbdev driver generates alignment exception at
startup:
--- interrupt: 600 at memset+0x60/0xc0
NIP: c0021414 LR: c03fc49c CTR: 00007fff
REGS: ca021c10 TRAP: 0600 Tainted: G W (5.14.2-pmac-00727-g12a41fa69492)
MSR: 00009032 <EE,ME,IR,DR,RI> CR: 44008442 XER: 20000100
DAR: cab80020 DSISR: 00017c07
GPR00: 00000007 ca021cd0 c14412e0 cab80000 00000000 00100000 cab8001c 00000004
GPR08: 00100000 00007fff 00000000 00000000 84008442 00000000 c0006fb4 00000000
GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00100000
GPR24: 00000000 81800000 00000320 c15fa400 c14d1878 00000000 c14d1800 c094e19c
NIP [c0021414] memset+0x60/0xc0
LR [c03fc49c] chipsfb_pci_init+0x160/0x580
--- interrupt: 600
[ca021cd0] [c03fc46c] chipsfb_pci_init+0x130/0x580 (unreliable)
[ca021d20] [c03a3a70] pci_device_probe+0xf8/0x1b8
[ca021d50] [c043d584] really_probe.part.0+0xac/0x388
[ca021d70] [c043d914] __driver_probe_device+0xb4/0x170
[ca021d90] [c043da18] driver_probe_device+0x48/0x144
[ca021dc0] [c043e318] __driver_attach+0x11c/0x1c4
[ca021de0] [c043ad30] bus_for_each_dev+0x88/0xf0
[ca021e10] [c043c724] bus_add_driver+0x190/0x22c
[ca021e40] [c043ee94] driver_register+0x9c/0x170
[ca021e60] [c0006c28] do_one_initcall+0x54/0x1ec
[ca021ed0] [c08246e4] kernel_init_freeable+0x1c0/0x270
[ca021f10] [c0006fdc] kernel_init+0x28/0x11c
[ca021f30] [c0017148] ret_from_kernel_thread+0x14/0x1c
Instruction dump:
7d4601a4 39490777 7d4701a4 39490888 7d4801a4 39490999 7d4901a4 39290aaa
7d2a01a4 4c00012c 4bfffe88 0fe00000 <4bfffe80> 9421fff0 38210010 48001970
This is due to 'dcbz' instruction being used on non-cached memory.
'dcbz' instruction is used by memset() to zeroize a complete
cacheline at once, and memset() is not expected to be used on non
cached memory.
When performing a 'sparse' check on fbdev driver, it also appears
that the use of memset() is unexpected:
drivers/video/fbdev/chipsfb.c:334:17: warning: incorrect type in argument 1 (different address spaces)
drivers/video/fbdev/chipsfb.c:334:17: expected void *
drivers/video/fbdev/chipsfb.c:334:17: got char [noderef] __iomem *screen_base
drivers/video/fbdev/chipsfb.c:334:15: warning: memset with byte count of 1048576
Use fb_memset() instead of memset(). fb_memset() is defined as
memset_io() for powerpc.
Fixes: 8c8709334c ("[PATCH] ppc32: Remove CONFIG_PMAC_PBOOK")
Reported-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/884a54f1e5cb774c1d9b4db780209bee5d4f6718.1631712563.git.christophe.leroy@csgroup.eu
UPD_CONSTR was previously a preprocessor define for an old GCC 4.9
inline asm bug with m<> constraints.
Fixes: 6563139d90 ("powerpc: remove GCC version check for UPD_CONSTR")
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210914161712.2463458-1-ndesaulniers@google.com
Commit 8e11d62e2e ("powerpc/mem: Add back missing header to fix 'no
previous prototype' error") was supposed to fix the problem, but in
the meantime commit a927bd6ba9 ("mm: fix phys_to_target_node() and*
memory_add_physaddr_to_nid() exports") moved create_section_mapping()
prototype from asm/sparsemem.h to asm/mmzone.h
Fixes: 8e11d62e2e ("powerpc/mem: Add back missing header to fix 'no previous prototype' error")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/025754fde3d027904ae9d0191f395890bec93369.1631541649.git.christophe.leroy@csgroup.eu
On powerpc, pci_dev_is_added() is called as part of SR-IOV fixups
that are done under pcibios_add_device() which in turn is only called in
pci_device_add() whih is called when a PCI device is scanned.
pci_dev_assign_added() is called in pci_bus_add_device() which is only
called after scanning the device. Thus pci_dev_is_added() is always
false and can be dropped.
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Oliver O'Halloran <oohall@gmail.com>
[mpe: Tweak change log slightly to reflect Oliver's comments]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210910141940.2598035-2-schnelle@linux.ibm.com
commit 6d7f58b04d ("[PATCH] powerpc: Some minor cleanups to setup_32.c")
removed of_show_percpuinfo but didn't remove the prototype.
Remove it.
Fixes: 6d7f58b04d ("[PATCH] powerpc: Some minor cleanups to setup_32.c")
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210903063246.70691-1-dja@axtens.net
When CONFIG_SMP=y, timebase synchronization is required when the second
kernel is started.
arch/powerpc/kernel/smp.c:
int __cpu_up(unsigned int cpu, struct task_struct *tidle)
{
...
if (smp_ops->give_timebase)
smp_ops->give_timebase();
...
}
void start_secondary(void *unused)
{
...
if (smp_ops->take_timebase)
smp_ops->take_timebase();
...
}
When CONFIG_HOTPLUG_CPU=n and CONFIG_KEXEC_CORE=n,
smp_85xx_ops.give_timebase is NULL,
smp_85xx_ops.take_timebase is NULL,
As a result, the timebase is not synchronized.
Timebase synchronization does not depend on CONFIG_HOTPLUG_CPU.
Fixes: 56f1ba2807 ("powerpc/mpc85xx: refactor the PM operations")
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210929033646.39630-3-nixiaoming@huawei.com
When the field described in mpc85xx_smp_guts_ids[] is not configured in
dtb, the mpc85xx_setup_pmc() does not assign a value to the "guts"
variable. As a result, the oops is triggered when
mpc85xx_freeze_time_base() is executed.
Fixes: 56f1ba2807 ("powerpc/mpc85xx: refactor the PM operations")
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210929033646.39630-2-nixiaoming@huawei.com
The upcoming PAPR spec adds a 2M page size, bit 23 right after 16G page
size in the "ibm,query-pe-dma-window" call.
This adds support for the new page size. Since the new page size is out
of sorted order, this changes the loop to not assume that shift[] is
sorted.
This has now been tested and is known to work on a pre-release version
of phyp.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Leonardo Bras <leobras.c@gmail.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211006044735.1114669-1-aik@ozlabs.ru
Nathan Chancellor reports that the recent change to pci_iounmap in
commit 9caea00076 ("parisc: Declare pci_iounmap() parisc version only
when CONFIG_PCI enabled") causes build errors on arm64.
It took me about two hours to convince myself that I think I know what
the logic of that mess of #ifdef's in the <asm-generic/io.h> header file
really aim to do, and rewrite it to be easier to follow.
Famous last words.
Anyway, the code has now been lifted from that grotty header file into
lib/pci_iomap.c, and has fairly extensive comments about what the logic
is. It also avoids indirecting through another confusing (and badly
named) helper function that has other preprocessor config conditionals.
Let's see what odd architecture did something else strange in this area
to break things. But my arm64 cross build is clean.
Fixes: 9caea00076 ("parisc: Declare pci_iounmap() parisc version only when CONFIG_PCI enabled")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Ulrich Teichert <krypton@ulrich-teichert.org>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Prevent a infinite loop in the MCE recovery on return to user space,
which was caused by a second MCE queueing work for the same page and
thereby creating a circular work list.
- Make kern_addr_valid() handle existing PMD entries, which are marked not
present in the higher level page table, correctly instead of blindly
dereferencing them.
- Pass a valid address to sanitize_phys(). This was caused by the mixture
of inclusive and exclusive ranges. memtype_reserve() expect 'end' being
exclusive, but sanitize_phys() wants it inclusive. This worked so far,
but with end being the end of the physical address space the fail is
exposed.
- Increase the maximum supported GPIO numbers for 64bit. Newer SoCs exceed
the previous maximum.
-----BEGIN PGP SIGNATURE-----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=7cq3
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.15_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Prevent a infinite loop in the MCE recovery on return to user space,
which was caused by a second MCE queueing work for the same page and
thereby creating a circular work list.
- Make kern_addr_valid() handle existing PMD entries, which are marked
not present in the higher level page table, correctly instead of
blindly dereferencing them.
- Pass a valid address to sanitize_phys(). This was caused by the
mixture of inclusive and exclusive ranges. memtype_reserve() expect
'end' being exclusive, but sanitize_phys() wants it inclusive. This
worked so far, but with end being the end of the physical address
space the fail is exposed.
- Increase the maximum supported GPIO numbers for 64bit. Newer SoCs
exceed the previous maximum.
* tag 'x86_urgent_for_v5.15_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Avoid infinite loop for copy from user recovery
x86/mm: Fix kern_addr_valid() to cope with existing but not present entries
x86/platform: Increase maximum GPIO number for X86_64
x86/pat: Pass valid address to sanitize_phys()
checked and then reread which makes all the checks invalid. Reuse the
already read value instead.
-----BEGIN PGP SIGNATURE-----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=z1/t
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2021-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fix from Thomas Gleixner:
"A single fix for the perf core where a value read with READ_ONCE() was
checked and then reread which makes all the checks invalid. Reuse the
already read value instead"
* tag 'perf-urgent-2021-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
events: Reuse value read using READ_ONCE instead of re-reading it
- Make the fast path reader ordering guarantees correct.
- Code reshuffling to make the fix simpler.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmFHIykTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoeQOD/9fK16wOliLWJ082y/ywmFly0XnWXW3
WiHyWrrt6gr/nqbPUFkVzQtdtTY3Xanuid1WT9S/EQ45Vw9KI4GxtAQz4vBIyI6q
/zz13+xOQdeEdH745ufOELaL/KKLsFAJXcf7UINZgVI8s4h7ghx2fy6FCd7vOu88
Mlv9CBnBpcScnOmNehsnBA11QuclSf6aOXeqkMtBmndVoRzTRMpgnGLmu74J+9gh
iV6aquGSSU39FTvUIozm2nfTeCAJtd/SK//tMIg6dvE1N/cFxr3rel26MmlFuQCI
3hf2BRROtYvR+n/7Q9l+M+q/77SJEEWHIMKqG4sUaopDq6s4vhcOqM2FtXZAx7Lp
lcqOHcL9XpXbKiHPo1RcbnrzzDtObWKearJ5nkQVxX2OpbkzJwbrcQPYOdwJ/BOd
gpHyE1eI/mYLW5QTchAEQvVPP6gbKLNaKuXLxHz0SJSFpxtLq3bI4gE3pP254dlQ
KsbytPfzzkk7MSVsRopf827B7K1+XrM/lmBSVJ70rzvLPiPVd7M7Jn6jlCov85XS
8sza4hQw4r/yNUDQWNO/u4GHicDNRMeYexA3axretfKSjdqegiNHGwEzBR7mhhBP
DWxn3B4ZzLebj8dR8hR8zMf6cUeGui1+JIEN6mvEN4CxQlz393IMLlmsEvNcSETf
L5yTIRc1sn1efw==
=nwT0
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2021-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"A set of updates for the RT specific reader/writer locking base code:
- Make the fast path reader ordering guarantees correct.
- Code reshuffling to make the fix simpler"
[ This plays ugly games with atomic_add_return_release() because we
don't have a plain atomic_add_release(), and should really be cleaned
up, I think - Linus ]
* tag 'locking-urgent-2021-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rwbase: Take care of ordering guarantee for fastpath reader
locking/rwbase: Extract __rwbase_write_trylock()
locking/rwbase: Properly match set_and_save_state() to restore_state()
Fix crashes when scv (System Call Vectored) is used to make a syscall when a transaction
is active, on Power9 or later.
Fix bad interactions between rfscv (Return-from scv) and Power9 fake-suspend mode.
Fix crashes when handling machine checks in LPARs using the Hash MMU.
Partly revert a recent change to our XICS interrupt controller code, which broke the
recently added Microwatt support.
Thanks to: Cédric Le Goater, Eirik Fuller, Ganesh Goudar, Gustavo Romero, Joel Stanley,
Nicholas Piggin.
-----BEGIN PGP SIGNATURE-----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=yC9U
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix crashes when scv (System Call Vectored) is used to make a syscall
when a transaction is active, on Power9 or later.
- Fix bad interactions between rfscv (Return-from scv) and Power9
fake-suspend mode.
- Fix crashes when handling machine checks in LPARs using the Hash MMU.
- Partly revert a recent change to our XICS interrupt controller code,
which broke the recently added Microwatt support.
Thanks to Cédric Le Goater, Eirik Fuller, Ganesh Goudar, Gustavo Romero,
Joel Stanley, Nicholas Piggin.
* tag 'powerpc-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/xics: Set the IRQ chip data for the ICS native backend
powerpc/mce: Fix access error in mce handler
KVM: PPC: Book3S HV: Tolerate treclaim. in fake-suspend mode changing registers
powerpc/64s: system call rfscv workaround for TM bugs
selftests/powerpc: Add scv versions of the basic TM syscall tests
powerpc/64s: system call scv tabort fix for corrupt irq soft-mask state
- Fix bugs in checkkconfigsymbols.py
- Fix missing sys import in gen_compile_commands.py
- Fix missing FORCE warning for ARCH=sh builds
- Fix -Wignored-optimization-argument warnings for Clang builds
- Turn -Wignored-optimization-argument into an error in order to stop
building instead of sprinkling warnings
-----BEGIN PGP SIGNATURE-----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=EBGX
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix bugs in checkkconfigsymbols.py
- Fix missing sys import in gen_compile_commands.py
- Fix missing FORCE warning for ARCH=sh builds
- Fix -Wignored-optimization-argument warnings for Clang builds
- Turn -Wignored-optimization-argument into an error in order to stop
building instead of sprinkling warnings
* tag 'kbuild-fixes-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Add -Werror=ignored-optimization-argument to CLANG_FLAGS
x86/build: Do not add -falign flags unconditionally for clang
kbuild: Fix comment typo in scripts/Makefile.modpost
sh: Add missing FORCE prerequisites in Makefile
gen_compile_commands: fix missing 'sys' package
checkkconfigsymbols.py: Remove skipping of help lines in parse_kconfig_file
checkkconfigsymbols.py: Forbid passing 'HEAD' to --commit
- Fix ip display in 'perf script' when output type != attr->type.
- Ignore deprecation warning when using libbpf'sg btf__get_from_id(),
fixing the build with libbpf v0.6+.
- Make use of FD() robust in libperf, fixing a segfault with 'perf stat --iostat list'.
- Initialize addr_location:srcline pointer to NULL when resolving
callchain addresses.
- Fix fused instruction logic for assembly functions in 'perf annotate'.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYUZ+YgAKCRCyPKLppCJ+
JwF3AP9q5lcFHsYfFYmQj9U5UPIXm9A94Y7/9r5nHbVGig8Y0wEAgIBWHj3paCaZ
P0d0MQX7lQ7/wC5o+wlXJueUb0h8ZgE=
=uPbL
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v5.15-2021-09-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix ip display in 'perf script' when output type != attr->type.
- Ignore deprecation warning when using libbpf'sg btf__get_from_id(),
fixing the build with libbpf v0.6+.
- Make use of FD() robust in libperf, fixing a segfault with 'perf stat
--iostat list'.
- Initialize addr_location:srcline pointer to NULL when resolving
callchain addresses.
- Fix fused instruction logic for assembly functions in 'perf
annotate'.
* tag 'perf-tools-fixes-for-v5.15-2021-09-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf bpf: Ignore deprecation warning when using libbpf's btf__get_from_id()
libperf evsel: Make use of FD robust.
perf machine: Initialize srcline string member in add_location struct
perf script: Fix ip display when type != attr->type
perf annotate: Fix fused instr logic for assembly functions
The old dmascc driver depends on the legacy ISA_DMA_API, and blindly
just casts the kernel virtual address to 'int' for set_dma_addr().
That works only incidentally, and because the high bits of the address
will be ignored anyway. And on 64-bit architectures it causes warnings.
Admittedly, 64-bit architectures with ISA are basically dead - I think
the only example of this is alpha, and nobody would ever use the dmascc
driver there. But hey, the fix is easy enough, the end result is
cleaner, and it's yet another configuration that now builds without
warnings.
If somebody actually uses this driver on an alpha and this fixes it for
you, please email me. Because that is just incredibly bizarre.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With the previous commit (9caea00076: "parisc: Declare pci_iounmap()
parisc version only when CONFIG_PCI enabled") we can now enable
GENERIC_PCI_IOMAP unconditionally on alpha, and if PCI is not enabled we
will just get the nice empty helper functions that allow mixed-bus
drivers to build.
Example driver: the old 3com/3c59x.c driver works with either the PCI or
the EISA version of the 3x59x card, but wouldn't build in an EISA-only
configuration because of missing pci_iomap() and pci_iounmap() dummy
wrappers.
Most of the other PCI infrastructure just becomes empty wrappers even
without GENERIC_PCI_IOMAP, and it's not obvious that the pci_iomap
functionality shouldn't do the same, but this works.
Cc: Ulrich Teichert <krypton@ulrich-teichert.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus noticed odd declaration rules for pci_iounmap() in iomap.h and
pci_iomap.h, where it dependend on either NO_GENERIC_PCI_IOPORT_MAP or
GENERIC_IOMAP when CONFIG_PCI was disabled.
Testing on parisc seems to indicate that we need pci_iounmap() only when
CONFIG_PCI is enabled, so the declaration of pci_iounmap() can be moved
cleanly into pci_iomap.h in sync with the declarations of pci_iomap().
Link: https://lore.kernel.org/all/CAHk-=wjRrh98pZoQ+AzfWmsTZacWxTJKXZ9eKU2X_0+jM=O8nw@mail.gmail.com/
Signed-off-by: Helge Deller <deller@gmx.de>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 97a29d59fc ("[PARISC] fix compile break caused by iomap: make IOPORT/PCI mapping functions conditional")
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Ulrich Teichert <krypton@ulrich-teichert.org>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commits
9984d6664c ("drm/vc4: hdmi: Make sure the controller is powered in detect")
411efa18e4 ("drm/vc4: hdmi: Move the HSM clock enable to runtime_pm")
as Michael Stapelberg reports that the new runtime PM changes cause his
Raspberry Pi 3 to hang on boot, probably due to interactions with other
changes in the DRM tree (because a bisect points to the merge in commit
e058a84bfd: "Merge tag 'drm-next-2021-07-01' of git://.../drm").
Revert these two commits until it's been resolved.
Link: https://lore.kernel.org/all/871r5mp7h2.fsf@midna.i-did-not-set--mail-host-address--so-tickle-me/
Reported-and-tested-by: Michael Stapelberg <michael@stapelberg.ch>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Cc: Dave Airlie <airlied@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Similar to commit 589834b3a0 ("kbuild: Add
-Werror=unknown-warning-option to CLANG_FLAGS").
Clang ignores certain GCC flags that it has not implemented, only
emitting a warning:
$ echo | clang -fsyntax-only -falign-jumps -x c -
clang-14: warning: optimization flag '-falign-jumps' is not supported
[-Wignored-optimization-argument]
When one of these flags gets added to KBUILD_CFLAGS unconditionally, all
subsequent cc-{disable-warning,option} calls fail because -Werror was
added to these invocations to turn the above warning and the equivalent
-W flag warning into errors.
To catch the presence of these flags earlier, turn
-Wignored-optimization-argument into an error so that the flags can
either be implemented or ignored via cc-option and there are no more
weird errors.
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
clang does not support -falign-jumps and only recently gained support
for -falign-loops. When one of the configuration options that adds these
flags is enabled, clang warns and all cc-{disable-warning,option} that
follow fail because -Werror gets added to test for the presence of this
warning:
clang-14: warning: optimization flag '-falign-jumps=0' is not supported
[-Wignored-optimization-argument]
To resolve this, add a couple of cc-option calls when building with
clang; gcc has supported these options since 3.2 so there is no point in
testing for their support. -falign-functions was implemented in clang-7,
-falign-loops was implemented in clang-14, and -falign-jumps has not
been implemented yet.
Link: https://lore.kernel.org/r/YSQE2f5teuvKLkON@Ryzen-9-3900X.localdomain/
Link: https://lore.kernel.org/r/20210824022640.2170859-2-nathan@kernel.org/
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Change comment "create one <module>.mod.c file pr. module"
to "create one <module>.mod.c file per module"
Signed-off-by: Ramji Jiyani <ramjiyani@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
make:
arch/sh/boot/Makefile:87: FORCE prerequisite is missing
Add the missing FORCE prerequisites for all build targets identified by
"make help".
Fixes: e1f86d7b4b ("kbuild: warn if FORCE is missing for if_changed(_dep,_rule) and filechk")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
We need to import the 'sys' package since the script has called
sys.exit() method.
Fixes: 6ad7cbc015 ("Makefile: Add clang-tidy and static analyzer support to makefile")
Signed-off-by: Kortan <kortanzh@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When parsing Kconfig files to find symbol definitions and references,
lines after a 'help' line are skipped until a new config definition
starts.
However, Kconfig statements can actually be after a help section, as
long as these have shallower indentation. These are skipped by the
parser.
This means that symbols referenced in this kind of statements are
ignored by this function and thus are not considered undefined
references in case the symbol is not defined.
Remove the 'skip' logic entirely, as it is not needed if we just use the
STMT regex to find the end of help lines.
However, this means that keywords that appear as part of the help
message (i.e. with the same indentation as the help lines) it will be
considered as a reference/definition. This can happen now as well, but
only with REGEX_KCONFIG_DEF lines. Also, the keyword must have a SYMBOL
after it, which probably means that someone referenced a config in the
help so it seems like a bonus :)
The real solution is to keep track of the indentation when a the first
help line in encountered and then handle DEF and STMT lines only if the
indentation is shallower.
Signed-off-by: Ariel Marcovitch <arielmarcovitch@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
As opposed to the --diff option, --commit can get ref names instead of
commit hashes.
When using the --commit option, the script resets the working directory
to the commit before the given ref, by adding '~' to the end of the ref.
However, the 'HEAD' ref is relative, and so when the working directory
is reset to 'HEAD~', 'HEAD' points to what was 'HEAD~'. Then when the
script resets to 'HEAD' it actually stays in the same commit. In this
case, the script won't report any cases because there is no diff between
the cases of the two refs.
Prevent the user from using HEAD refs.
A better solution might be to resolve the refs before doing the
reset, but for now just disallow such refs.
Signed-off-by: Ariel Marcovitch <arielmarcovitch@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
We already had the implementation for __udiv_qrnnd (unsigned divide for
multi-precision arithmetic) as part of the alpha math emulation code.
But you can disable the math emulation code - even if you shouldn't -
and then the MPI code that actually wants this functionality (and is
needed by various crypto functions) will fail to build.
So move the extended-precision divide code to be a regular library
function, just like all the regular division code is. That way ie is
available regardless of math-emulation.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ok, it almost certainly is still broken on actual hardware, but the
immediate reason for it having been marked BROKEN was a build error that
is fixed by just making sure the low-level IO header file is included
sufficiently early that the __EXTERN_INLINE hackery takes effect.
This was marked broken back in 2017 by commit 1883c9f49d ("alpha: mark
jensen as broken"), but Ulrich Teichert made me look at it as part of my
cross-build work to make sure -Werror actually does the right thing.
There are lots of alpha configurations that do not build cleanly, but
now it's no longer because Jensen wouldn't be buildable. That said,
because the Jensen platform doesn't force PCI to be enabled (Jensen only
had EISA), it ends up being somewhat interesting as a source of odd
configs.
Reported-by: Ulrich Teichert <krypton@ulrich-teichert.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Perf code re-implements libbpf's btf__load_from_kernel_by_id() API as
a weak function, presumably to dynamically link against old version of
libbpf shared library. Unfortunately this causes compilation warning
when perf is compiled against libbpf v0.6+.
For now, just ignore deprecation warning, but there might be a better
solution, depending on perf's needs.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: kernel-team@fb.com
LPU-Reference: 20210914170004.4185659-1-andrii@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
FD uses xyarray__entry that may return NULL if an index is out of
bounds. If NULL is returned then a segv happens as FD unconditionally
dereferences the pointer. This was happening in a case of with perf
iostat as shown below. The fix is to make FD an "int*" rather than an
int and handle the NULL case as either invalid input or a closed fd.
$ sudo gdb --args perf stat --iostat list
...
Breakpoint 1, perf_evsel__alloc_fd (evsel=0x5555560951a0, ncpus=1, nthreads=1) at evsel.c:50
50 {
(gdb) bt
#0 perf_evsel__alloc_fd (evsel=0x5555560951a0, ncpus=1, nthreads=1) at evsel.c:50
#1 0x000055555585c188 in evsel__open_cpu (evsel=0x5555560951a0, cpus=0x555556093410,
threads=0x555556086fb0, start_cpu=0, end_cpu=1) at util/evsel.c:1792
#2 0x000055555585cfb2 in evsel__open (evsel=0x5555560951a0, cpus=0x0, threads=0x555556086fb0)
at util/evsel.c:2045
#3 0x000055555585d0db in evsel__open_per_thread (evsel=0x5555560951a0, threads=0x555556086fb0)
at util/evsel.c:2065
#4 0x00005555558ece64 in create_perf_stat_counter (evsel=0x5555560951a0,
config=0x555555c34700 <stat_config>, target=0x555555c2f1c0 <target>, cpu=0) at util/stat.c:590
#5 0x000055555578e927 in __run_perf_stat (argc=1, argv=0x7fffffffe4a0, run_idx=0)
at builtin-stat.c:833
#6 0x000055555578f3c6 in run_perf_stat (argc=1, argv=0x7fffffffe4a0, run_idx=0)
at builtin-stat.c:1048
#7 0x0000555555792ee5 in cmd_stat (argc=1, argv=0x7fffffffe4a0) at builtin-stat.c:2534
#8 0x0000555555835ed3 in run_builtin (p=0x555555c3f540 <commands+288>, argc=3,
argv=0x7fffffffe4a0) at perf.c:313
#9 0x0000555555836154 in handle_internal_command (argc=3, argv=0x7fffffffe4a0) at perf.c:365
#10 0x000055555583629f in run_argv (argcp=0x7fffffffe2ec, argv=0x7fffffffe2e0) at perf.c:409
#11 0x0000555555836692 in main (argc=3, argv=0x7fffffffe4a0) at perf.c:539
...
(gdb) c
Continuing.
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (uncore_iio_0/event=0x83,umask=0x04,ch_mask=0xF,fc_mask=0x07/).
/bin/dmesg | grep -i perf may provide additional information.
Program received signal SIGSEGV, Segmentation fault.
0x00005555559b03ea in perf_evsel__close_fd_cpu (evsel=0x5555560951a0, cpu=1) at evsel.c:166
166 if (FD(evsel, cpu, thread) >= 0)
v3. fixes a bug in perf_evsel__run_ioctl where the sense of a branch was
backward.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210918054440.2350466-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's later supposed to be either a correct address or NULL. Without the
initialization, it may contain an undefined value which results in the
following segmentation fault:
# perf top --sort comm -g --ignore-callees=do_idle
terminates with:
#0 0x00007ffff56b7685 in __strlen_avx2 () from /lib64/libc.so.6
#1 0x00007ffff55e3802 in strdup () from /lib64/libc.so.6
#2 0x00005555558cb139 in hist_entry__init (callchain_size=<optimized out>, sample_self=true, template=0x7fffde7fb110, he=0x7fffd801c250) at util/hist.c:489
#3 hist_entry__new (template=template@entry=0x7fffde7fb110, sample_self=sample_self@entry=true) at util/hist.c:564
#4 0x00005555558cb4ba in hists__findnew_entry (hists=hists@entry=0x5555561d9e38, entry=entry@entry=0x7fffde7fb110, al=al@entry=0x7fffde7fb420,
sample_self=sample_self@entry=true) at util/hist.c:657
#5 0x00005555558cba1b in __hists__add_entry (hists=hists@entry=0x5555561d9e38, al=0x7fffde7fb420, sym_parent=<optimized out>, bi=bi@entry=0x0, mi=mi@entry=0x0,
sample=sample@entry=0x7fffde7fb4b0, sample_self=true, ops=0x0, block_info=0x0) at util/hist.c:288
#6 0x00005555558cbb70 in hists__add_entry (sample_self=true, sample=0x7fffde7fb4b0, mi=0x0, bi=0x0, sym_parent=<optimized out>, al=<optimized out>, hists=0x5555561d9e38)
at util/hist.c:1056
#7 iter_add_single_cumulative_entry (iter=0x7fffde7fb460, al=<optimized out>) at util/hist.c:1056
#8 0x00005555558cc8a4 in hist_entry_iter__add (iter=iter@entry=0x7fffde7fb460, al=al@entry=0x7fffde7fb420, max_stack_depth=<optimized out>, arg=arg@entry=0x7fffffff7db0)
at util/hist.c:1231
#9 0x00005555557cdc9a in perf_event__process_sample (machine=<optimized out>, sample=0x7fffde7fb4b0, evsel=<optimized out>, event=<optimized out>, tool=0x7fffffff7db0)
at builtin-top.c:842
#10 deliver_event (qe=<optimized out>, qevent=<optimized out>) at builtin-top.c:1202
#11 0x00005555558a9318 in do_flush (show_progress=false, oe=0x7fffffff80e0) at util/ordered-events.c:244
#12 __ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP, timestamp=timestamp@entry=0) at util/ordered-events.c:323
#13 0x00005555558a9789 in __ordered_events__flush (timestamp=<optimized out>, how=<optimized out>, oe=<optimized out>) at util/ordered-events.c:339
#14 ordered_events__flush (how=OE_FLUSH__TOP, oe=0x7fffffff80e0) at util/ordered-events.c:341
#15 ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP) at util/ordered-events.c:339
#16 0x00005555557cd631 in process_thread (arg=0x7fffffff7db0) at builtin-top.c:1114
#17 0x00007ffff7bb817a in start_thread () from /lib64/libpthread.so.0
#18 0x00007ffff5656dc3 in clone () from /lib64/libc.so.6
If you look at the frame #2, the code is:
488 if (he->srcline) {
489 he->srcline = strdup(he->srcline);
490 if (he->srcline == NULL)
491 goto err_rawdata;
492 }
If he->srcline is not NULL (it is not NULL if it is uninitialized rubbish),
it gets strdupped and strdupping a rubbish random string causes the problem.
Also, if you look at the commit 1fb7d06a50, it adds the srcline property
into the struct, but not initializing it everywhere needed.
Committer notes:
Now I see, when using --ignore-callees=do_idle we end up here at line
2189 in add_callchain_ip():
2181 if (al.sym != NULL) {
2182 if (perf_hpp_list.parent && !*parent &&
2183 symbol__match_regex(al.sym, &parent_regex))
2184 *parent = al.sym;
2185 else if (have_ignore_callees && root_al &&
2186 symbol__match_regex(al.sym, &ignore_callees_regex)) {
2187 /* Treat this symbol as the root,
2188 forgetting its callees. */
2189 *root_al = al;
2190 callchain_cursor_reset(cursor);
2191 }
2192 }
And the al that doesn't have the ->srcline field initialized will be
copied to the root_al, so then, back to:
1211 int hist_entry_iter__add(struct hist_entry_iter *iter, struct addr_location *al,
1212 int max_stack_depth, void *arg)
1213 {
1214 int err, err2;
1215 struct map *alm = NULL;
1216
1217 if (al)
1218 alm = map__get(al->map);
1219
1220 err = sample__resolve_callchain(iter->sample, &callchain_cursor, &iter->parent,
1221 iter->evsel, al, max_stack_depth);
1222 if (err) {
1223 map__put(alm);
1224 return err;
1225 }
1226
1227 err = iter->ops->prepare_entry(iter, al);
1228 if (err)
1229 goto out;
1230
1231 err = iter->ops->add_single_entry(iter, al);
1232 if (err)
1233 goto out;
1234
That al at line 1221 is what hist_entry_iter__add() (called from
sample__resolve_callchain()) saw as 'root_al', and then:
iter->ops->add_single_entry(iter, al);
will go on with al->srcline with a bogus value, I'll add the above
sequence to the cset and apply, thanks!
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
CC: Milian Wolff <milian.wolff@kdab.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Fixes: 1fb7d06a50 ("perf report Use srcline from callchain for hist entries")
Link: https //lore.kernel.org/r/20210719145332.29747-1-mpetlan@redhat.com
Reported-by: Juri Lelli <jlelli@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
set_print_ip_opts() was not being called when type != attr->type
because there is not a one-to-one relationship between output types
and attr->type. That resulted in ip not printing.
The attr_type() function is removed, and the match of attr->type to
output type is corrected.
Example on ADL using taskset to select an atom cpu:
# perf record -e cpu_atom/cpu-cycles/ taskset 0x1000 uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.003 MB perf.data (7 samples) ]
Before:
# perf script | head
taskset 428 [-01] 10394.179041: 1 cpu_atom/cpu-cycles/:
taskset 428 [-01] 10394.179043: 1 cpu_atom/cpu-cycles/:
taskset 428 [-01] 10394.179044: 11 cpu_atom/cpu-cycles/:
taskset 428 [-01] 10394.179045: 407 cpu_atom/cpu-cycles/:
taskset 428 [-01] 10394.179046: 16789 cpu_atom/cpu-cycles/:
taskset 428 [-01] 10394.179052: 676300 cpu_atom/cpu-cycles/:
uname 428 [-01] 10394.179278: 4079859 cpu_atom/cpu-cycles/:
After:
# perf script | head
taskset 428 10394.179041: 1 cpu_atom/cpu-cycles/: ffffffff95a0bb97 __intel_pmu_enable_all.constprop.48+0x47 ([kernel.kallsyms])
taskset 428 10394.179043: 1 cpu_atom/cpu-cycles/: ffffffff95a0bb97 __intel_pmu_enable_all.constprop.48+0x47 ([kernel.kallsyms])
taskset 428 10394.179044: 11 cpu_atom/cpu-cycles/: ffffffff95a0bb97 __intel_pmu_enable_all.constprop.48+0x47 ([kernel.kallsyms])
taskset 428 10394.179045: 407 cpu_atom/cpu-cycles/: ffffffff95a0bb97 __intel_pmu_enable_all.constprop.48+0x47 ([kernel.kallsyms])
taskset 428 10394.179046: 16789 cpu_atom/cpu-cycles/: ffffffff95a0bb97 __intel_pmu_enable_all.constprop.48+0x47 ([kernel.kallsyms])
taskset 428 10394.179052: 676300 cpu_atom/cpu-cycles/: 7f829ef73800 cfree+0x0 (/lib/libc-2.32.so)
uname 428 10394.179278: 4079859 cpu_atom/cpu-cycles/: ffffffff95bae912 vma_interval_tree_remove+0x1f2 ([kernel.kallsyms])
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20210911133053.15682-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some x86 microarchitectures fuse a subset of cmp/test/ALU instructions
with branch instructions, and thus perf annotate highlight such valid
pairs as fused.
When annotated with source, perf uses struct disasm_line to contain
either source or instruction line from objdump output. Usually, a C
statement generates multiple instructions which include such
cmp/test/ALU + branch instruction pairs. But in case of assembly
function, each individual assembly source line generate one
instruction.
The 'perf annotate' instruction fusion logic assumes the previous
disasm_line as the previous instruction line, which is wrong because,
for assembly function, previous disasm_line contains source line. And
thus perf fails to highlight valid fused instruction pairs for assembly
functions.
Fix it by searching backward until we find an instruction line and
consider that disasm_line as fused with current branch instruction.
Before:
│ cmpq %rcx, RIP+8(%rsp)
0.00 │ cmp %rcx,0x88(%rsp)
│ je .Lerror_bad_iret <--- Source line
0.14 │ ┌──je b4 <--- Instruction line
│ │movl %ecx, %eax
After:
│ cmpq %rcx, RIP+8(%rsp)
0.00 │ ┌──cmp %rcx,0x88(%rsp)
│ │je .Lerror_bad_iret
0.14 │ ├──je b4
│ │movl %ecx, %eax
Reviewed-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https //lore.kernel.org/r/20210911043854.8373-1-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
