Syzbot reported the following crash:
BUG: KMSAN: uninit-value in memchr+0xce/0x110 lib/string.c:961
memchr+0xce/0x110 lib/string.c:961
string_is_valid net/tipc/netlink_compat.c:176 [inline]
tipc_nl_compat_bearer_enable+0x2c4/0x910 net/tipc/netlink_compat.c:401
__tipc_nl_compat_doit net/tipc/netlink_compat.c:321 [inline]
tipc_nl_compat_doit+0x3aa/0xaf0 net/tipc/netlink_compat.c:354
tipc_nl_compat_handle net/tipc/netlink_compat.c:1162 [inline]
tipc_nl_compat_recv+0x1ae7/0x2750 net/tipc/netlink_compat.c:1265
genl_family_rcv_msg net/netlink/genetlink.c:601 [inline]
genl_rcv_msg+0x185f/0x1a60 net/netlink/genetlink.c:626
netlink_rcv_skb+0x431/0x620 net/netlink/af_netlink.c:2477
genl_rcv+0x63/0x80 net/netlink/genetlink.c:637
netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
netlink_unicast+0xf3e/0x1020 net/netlink/af_netlink.c:1336
netlink_sendmsg+0x127f/0x1300 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:622 [inline]
sock_sendmsg net/socket.c:632 [inline]
Uninit was created at:
__alloc_skb+0x309/0xa20 net/core/skbuff.c:208
alloc_skb include/linux/skbuff.h:1012 [inline]
netlink_alloc_large_skb net/netlink/af_netlink.c:1182 [inline]
netlink_sendmsg+0xb82/0x1300 net/netlink/af_netlink.c:1892
sock_sendmsg_nosec net/socket.c:622 [inline]
sock_sendmsg net/socket.c:632 [inline]
It was triggered when the bearer name size < TIPC_MAX_BEARER_NAME,
it would check with a wrong len/TLV_GET_DATA_LEN(msg->req), which
also includes priority and disc_domain length.
This patch is to fix it by checking it with a right length:
'TLV_GET_DATA_LEN(msg->req) - offsetof(struct tipc_bearer_config, name)'.
Reported-by: syzbot+8b707430713eb46e1e45@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Aaro Koskinen says:
====================
net: stmmac: fix handling of oversized frames
I accidentally had MTU size mismatch (9000 vs. 1500) in my network,
and I noticed I could kill a system using stmmac & 1500 MTU simply
by pinging it with "ping -s 2000 ...".
While testing a fix I encountered also some other issues that need fixing.
I have tested these only with enhanced descriptors, so the normal
descriptor changes need a careful review.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This is log is harmful as it can trigger multiple times per packet. Delete
it.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Packets without the last descriptor set should be dropped early. If we
receive a frame larger than the DMA buffer, the HW will continue using the
next descriptor. Driver mistakes these as individual frames, and sometimes
a truncated frame (without the LD set) may look like a valid packet.
This fixes a strange issue where the system replies to 4098-byte ping
although the MTU/DMA buffer size is set to 4096, and yet at the same
time it's logging an oversized packet.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we have error bits set, the discard_frame status will get overwritten
by checksum bit checks, which might set the status back to good one.
Fix by checking the COE status only if the frame is good.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, if we drop a packet, we exit from NAPI loop before the budget
is consumed. In some situations this will make the RX processing stall
e.g. when flood pinging the system with oversized packets, as the
errorneous packets are not dropped efficiently.
If we drop a packet, we should just continue to the next one as long as
the budget allows.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We always program the maximum DMA buffer size into the receive descriptor,
although the allocated size may be less. E.g. with the default MTU size
we allocate only 1536 bytes. If somebody sends us a bigger frame, then
memory may get corrupted.
Fix by using exact buffer sizes.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It was reported that re-introducing ASPM, in combination with RX
interrupt coalescing, results in significantly increased packet
latency, see [0]. Disabling ASPM or RX interrupt coalescing fixes
the issue. Therefore change the driver's default to disable RX
interrupt coalescing. Users still have the option to enable RX
coalescing via ethtool.
[0] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=925496
Fixes: a99790bf5c ("r8169: Reinstate ASPM Support")
Reported-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf 2019-03-29
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Bug fix in BTF deduplication that was mishandling an equivalence
comparison, from Andrii.
2) libbpf Makefile fixes to properly link against libelf for the shared
object and to actually export AF_XDP's xsk.h header, from Björn.
3) Fix use after free in bpf inode eviction, from Daniel.
4) Fix a bug in skb creation out of cpumap redirect, from Jesper.
5) Remove an unnecessary and triggerable WARN_ONCE() in max number
of call stack frames checking in verifier, from Paul.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcnnD7AAoJEEg/ir3gV/o+nksIAImv3hLoPXJoS/hnHQJV4FtB
U6euKao9PlKzMGCb7mii3WtBcn9ULwxNmWTA6oiJhZl2gp1gS/efAK5RFAis78pe
FKCuFU07antVcJQZ118L2gKSPDHwxuEOHm4d0IqlxzXr6gzldCZD+jSekD+nB59g
7Ehex+wi5ChPz5JqNA9UM5VQ9lO9Mf4yVrXKaZG3wAnT9Y0w2qwvqeNx5xVbXao9
3ugObrK24WVnajOK8Ub1MwREgveTuzccUy5GB4gc6DIBI8oSwKh+3DdqGqwiCM0z
/l5NmxK1ma+YpoKs1p6G7ipyTRielJD4oMbJeoilHfxsFyA1+AOIzdHjBw4Cd/4=
=SQ1L
-----END PGP SIGNATURE-----
Merge tag 'mlx5-fixes-2019-03-29' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
Mellanox, mlx5 fixes 2019-03-29
This series introduces some fixes to mlx5 driver.
Please pull and let me know if there is any problem.
For -stable v4.11
('net/mlx5: Decrease default mr cache size')
For -stable v4.12
('net/mlx5e: Add a lock on tir list')
For -stable v4.13
('net/mlx5e: Fix error handling when refreshing TIRs')
For -stable v4.18
('net/mlx5e: Update xon formula')
For -stable v4.19
('net: mlx5: Add a missing check on idr_find, free buf')
('net/mlx5e: Update xoff formula')
net-next merge Note:
When merged with net-next the following simple conflict will appear,
drivers/net/ethernet/mellanox/mlx5/core/en/port_buffer.c
++<<<<<<< HEAD (net)
+ * max_mtu: netdev's max_mtu
++=======
+ * @mtu: device's MTU
++>>>>>>> net-next
To resolve: just replace the line in net-next
* @mtu: device's MTU
to
* @max_mtu: netdev's max_mtu
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Change t4fw_version.h to update latest firmware version
number to 1.23.3.0.
Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
NULL or ZERO_SIZE_PTR will be returned for zero sized memory
request, and derefencing them will lead to a segfault
so it is unnecessory to call vzalloc for zero sized memory
request and not call functions which maybe derefence the
NULL allocated memory
this also fixes a possible memory leak if phy_ethtool_get_stats
returns error, memory should be freed before exit
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Wang Li <wangli39@baidu.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Only decrypt_internal() performs zero copy on rx, all paths
which don't hit decrypt_internal() must set zc to false,
otherwise tls_sw_recvmsg() may return 0 causing the application
to believe that that connection got closed.
Currently this happens with device offload when new record
is first read from.
Fixes: d069b780e3 ("tls: Fix tls_device receive")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reported-by: David Beckett <david.beckett@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After queue stopped, the wakeup mechanism may wake it up again
when ring buffer usage is lower than a threshold. This may cause
send path panic on NULL pointer when we stopped all tx queues in
netvsc_detach and start removing the netvsc device.
This patch fix it by adding a tx_disable flag to prevent unwanted
queue wakeup.
Fixes: 7b2ee50c0c ("hv_netvsc: common detach logic")
Reported-by: Mohammed Gamal <mgamal@redhat.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bond expects ethernet hwaddr for its slave, but it can be longer than 6
bytes - infiniband interface for example.
# cat /sys/devices/<skipped>/net/ib0/address
80:00:02:08:fe:80:00:00:00:00:00:00:7c:fe:90:03:00:be:5d:e1
# cat /sys/devices/<skipped>/net/ib0/bonding_slave/perm_hwaddr
80:00:02:08:fe:80
So print full hwaddr in sysfs "bonding_slave/perm_hwaddr" as well.
Signed-off-by: Konstantin Khorenko <khorenko@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver allocates an encap context based on the tunnel properties,
and reuse that context for all flows using the same tunnel properties.
Commit df2ef3bff1 ("net/mlx5e: Add GRE protocol offloading")
introduced another tunnel protocol other than the single VXLAN
previously supported. A flow that uses a tunnel with the same tunnel
properties but with a different tunnel type (GRE vs VXLAN for example)
would mistakenly reuse the previous alocated context, causing the
traffic to be sent with the wrong encapsulation. Fix that by
considering the tunnel type for encap contexts.
Fixes: df2ef3bff1 ("net/mlx5e: Add GRE protocol offloading")
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Set xon = xoff - netdev's max_mtu.
netdev's max_mtu will give enough time for the pause frame to
arrive at the sender.
Fixes: 0696d60853 ("net/mlx5e: Receive buffer configuration")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Make sure the struct mlx5_flow_destination is zero before
filling in the field.
Fixes: 8da202b249 ("net/mlx5: E-Switch, Add support for VEPA in legacy mode.")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Traditionally, the PF (Physical Function) which resides on vport 0 was
the E-switch manager. Since the ECPF (Embedded CPU Physical Function),
which resides on vport 0xfffe, was introduced as the E-Switch manager,
the assumption that the E-switch manager is on vport 0 is incorrect.
Since the eswitch code already uses the actual vport value, all we
need is to always set other_vport=1.
Signed-off-by: Omri Kahalon <omrik@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The esw offloads structures share a union with the legacy mode structs.
Reset the offloads struct to zero in init to protect from null
assumptions made by the legacy mode code.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The capacity of FDB offloading and NIC offloading table are
different, and when allocating the pedit actions, we should
use the correct namespace type.
Fixes: c500c86b0c ("net/mlx5e: support for two independent packet edit actions")
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The esw fdb table has a union of legacy and offloads members.
So if we were in a certain esw mode we could set some memebers and not
set null which is fine as on destroy path and don't care.
But then moving from legacy to switchdev a second time, the cleanup flow
of legacy mode checks if a struct member was in use if it's not null so
we need to make sure to reset the code to null when we init legacy mode.
Fixes: 8da202b249 ("net/mlx5: E-Switch, Add support for VEPA in legacy mode.")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Allow configuration of legacy link-modes even when extended link-modes
are supported. This requires reading of legacy advertisement even when
extended link-modes are supported. Since legacy and extended
advertisement are mutually excluded, wait for empty reply from extended
advertisement before reading legacy advertisement.
Fixes: 6a89737241 ("net/mlx5: ethtool, Add ethtool support for 50Gbps per lane link modes")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Ethtool option set_link_ksettings allows setting of legacy link-modes
or extended link-modes. Refine the decision of which type of link-modes
is set.
Fixes: 6a89737241 ("net/mlx5: ethtool, Add ethtool support for 50Gbps per lane link modes")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Refresh tirs is looping over a global list of tirs while netdevs are
adding and removing tirs from that list. That is why a lock is
required.
Fixes: 724b2aa151 ("net/mlx5e: TIRs management refactoring")
Signed-off-by: Yuval Avnery <yuvalav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
idr_find() can return a NULL value to 'flow' which is used without a
check. The patch adds a check to avoid potential NULL pointer dereference.
In case of mlx5_fpga_sbu_conn_sendmsg() failure, free buf allocated
using kzalloc.
Fixes: ab412e1dd7 ("net/mlx5: Accel, add TLS rx offload routines")
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
For some protocols we are not allowing IP header rewrite offload, since
the HW is not capable to properly adjust the l4 checksum. However, TTL
& HOPLIMIT modification can be done for all IP protocols, because they
are not part of the pseudo header taken into account for checksum.
Fixes: 7386788175 ("drivers: net: use flow action infrastructure")
Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Previously, a false positive would be caught if the TIRs list is
empty, since the err value was initialized to -ENOMEM, and was only
updated if a TIR is refreshed. This is resolved by initializing the
err value to zero.
Fixes: b676f65389 ("net/mlx5e: Refactor refresh TIRs")
Signed-off-by: Gavi Teitz <gavi@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Delete initialization of high order entries in mr cache to decrease initial
memory footprint. When required, the administrator can populate the
entries with memory keys via the /sys interface.
This approach is very helpful to significantly reduce the per HW function
memory footprint in virtualization environments such as SRIOV.
Fixes: 9603b61de1 ("mlx5: Move pci device handling from mlx5_ib to mlx5_core")
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reported-by: Shalom Toledo <shalomt@mellanox.com>
Acked-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
We want to avoid leaking pointer info from xdp_frame (that is placed in
top of frame) like commit 6dfb970d3d ("xdp: avoid leaking info stored in
frame data on page reuse"), and followup commit 97e19cce05 ("bpf:
reserve xdp_frame size in xdp headroom") that reserve this headroom.
These changes also affected how cpumap constructed SKBs, as xdpf->headroom
size changed, the skb data starting point were in-effect shifted with 32
bytes (sizeof xdp_frame). This was still okay, as the cpumap frame_size
calculation also included xdpf->headroom which were reduced by same amount.
A bug was introduced in commit 77ea5f4cbe ("bpf/cpumap: make sure
frame_size for build_skb is aligned if headroom isn't"), where the
xdpf->headroom became part of the SKB_DATA_ALIGN rounding up. This
round-up to find the frame_size is in principle still correct as it does
not exceed the 2048 bytes frame_size (which is max for ixgbe and i40e),
but the 32 bytes offset of pkt_data_start puts this over the 2048 bytes
limit. This cause skb_shared_info to spill into next frame. It is a little
hard to trigger, as the SKB need to use above 15 skb_shinfo->frags[] as
far as I calculate. This does happen in practise for TCP streams when
skb_try_coalesce() kicks in.
KASAN can be used to detect these wrong memory accesses, I've seen:
BUG: KASAN: use-after-free in skb_try_coalesce+0x3cb/0x760
BUG: KASAN: wild-memory-access in skb_release_data+0xe2/0x250
Driver veth also construct a SKB from xdp_frame in this way, but is not
affected, as it doesn't reserve/deduct the room (used by xdp_frame) from
the SKB headroom. Instead is clears the pointers via xdp_scrub_frame(),
and allows SKB to use this area.
The fix in this patch is to do like veth and instead allow SKB to (re)use
the area occupied by xdp_frame, by clearing via xdp_scrub_frame(). (This
does kill the idea of the SKB being able to access (mem) info from this
area, but I guess it was a bad idea anyhow, and it was already killed by
the veth changes.)
Fixes: 77ea5f4cbe ("bpf/cpumap: make sure frame_size for build_skb is aligned if headroom isn't")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When it is to cleanup net namespace, rds_tcp_exit_net() will call
rds_tcp_kill_sock(), if t_sock is NULL, it will not call
rds_conn_destroy(), rds_conn_path_destroy() and rds_tcp_conn_free() to free
connection, and the worker cp_conn_w is not stopped, afterwards the net is freed in
net_drop_ns(); While cp_conn_w rds_connect_worker() will call rds_tcp_conn_path_connect()
and reference 'net' which has already been freed.
In rds_tcp_conn_path_connect(), rds_tcp_set_callbacks() will set t_sock = sock before
sock->ops->connect, but if connect() is failed, it will call
rds_tcp_restore_callbacks() and set t_sock = NULL, if connect is always
failed, rds_connect_worker() will try to reconnect all the time, so
rds_tcp_kill_sock() will never to cancel worker cp_conn_w and free the
connections.
Therefore, the condition !tc->t_sock is not needed if it is going to do
cleanup_net->rds_tcp_exit_net->rds_tcp_kill_sock, because tc->t_sock is always
NULL, and there is on other path to cancel cp_conn_w and free
connection. So this patch is to fix this.
rds_tcp_kill_sock():
...
if (net != c_net || !tc->t_sock)
...
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
==================================================================
BUG: KASAN: use-after-free in inet_create+0xbcc/0xd28
net/ipv4/af_inet.c:340
Read of size 4 at addr ffff8003496a4684 by task kworker/u8:4/3721
CPU: 3 PID: 3721 Comm: kworker/u8:4 Not tainted 5.1.0 #11
Hardware name: linux,dummy-virt (DT)
Workqueue: krdsd rds_connect_worker
Call trace:
dump_backtrace+0x0/0x3c0 arch/arm64/kernel/time.c:53
show_stack+0x28/0x38 arch/arm64/kernel/traps.c:152
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x120/0x188 lib/dump_stack.c:113
print_address_description+0x68/0x278 mm/kasan/report.c:253
kasan_report_error mm/kasan/report.c:351 [inline]
kasan_report+0x21c/0x348 mm/kasan/report.c:409
__asan_report_load4_noabort+0x30/0x40 mm/kasan/report.c:429
inet_create+0xbcc/0xd28 net/ipv4/af_inet.c:340
__sock_create+0x4f8/0x770 net/socket.c:1276
sock_create_kern+0x50/0x68 net/socket.c:1322
rds_tcp_conn_path_connect+0x2b4/0x690 net/rds/tcp_connect.c:114
rds_connect_worker+0x108/0x1d0 net/rds/threads.c:175
process_one_work+0x6e8/0x1700 kernel/workqueue.c:2153
worker_thread+0x3b0/0xdd0 kernel/workqueue.c:2296
kthread+0x2f0/0x378 kernel/kthread.c:255
ret_from_fork+0x10/0x18 arch/arm64/kernel/entry.S:1117
Allocated by task 687:
save_stack mm/kasan/kasan.c:448 [inline]
set_track mm/kasan/kasan.c:460 [inline]
kasan_kmalloc+0xd4/0x180 mm/kasan/kasan.c:553
kasan_slab_alloc+0x14/0x20 mm/kasan/kasan.c:490
slab_post_alloc_hook mm/slab.h:444 [inline]
slab_alloc_node mm/slub.c:2705 [inline]
slab_alloc mm/slub.c:2713 [inline]
kmem_cache_alloc+0x14c/0x388 mm/slub.c:2718
kmem_cache_zalloc include/linux/slab.h:697 [inline]
net_alloc net/core/net_namespace.c:384 [inline]
copy_net_ns+0xc4/0x2d0 net/core/net_namespace.c:424
create_new_namespaces+0x300/0x658 kernel/nsproxy.c:107
unshare_nsproxy_namespaces+0xa0/0x198 kernel/nsproxy.c:206
ksys_unshare+0x340/0x628 kernel/fork.c:2577
__do_sys_unshare kernel/fork.c:2645 [inline]
__se_sys_unshare kernel/fork.c:2643 [inline]
__arm64_sys_unshare+0x38/0x58 kernel/fork.c:2643
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall arch/arm64/kernel/syscall.c:47 [inline]
el0_svc_common+0x168/0x390 arch/arm64/kernel/syscall.c:83
el0_svc_handler+0x60/0xd0 arch/arm64/kernel/syscall.c:129
el0_svc+0x8/0xc arch/arm64/kernel/entry.S:960
Freed by task 264:
save_stack mm/kasan/kasan.c:448 [inline]
set_track mm/kasan/kasan.c:460 [inline]
__kasan_slab_free+0x114/0x220 mm/kasan/kasan.c:521
kasan_slab_free+0x10/0x18 mm/kasan/kasan.c:528
slab_free_hook mm/slub.c:1370 [inline]
slab_free_freelist_hook mm/slub.c:1397 [inline]
slab_free mm/slub.c:2952 [inline]
kmem_cache_free+0xb8/0x3a8 mm/slub.c:2968
net_free net/core/net_namespace.c:400 [inline]
net_drop_ns.part.6+0x78/0x90 net/core/net_namespace.c:407
net_drop_ns net/core/net_namespace.c:406 [inline]
cleanup_net+0x53c/0x6d8 net/core/net_namespace.c:569
process_one_work+0x6e8/0x1700 kernel/workqueue.c:2153
worker_thread+0x3b0/0xdd0 kernel/workqueue.c:2296
kthread+0x2f0/0x378 kernel/kthread.c:255
ret_from_fork+0x10/0x18 arch/arm64/kernel/entry.S:1117
The buggy address belongs to the object at ffff8003496a3f80
which belongs to the cache net_namespace of size 7872
The buggy address is located 1796 bytes inside of
7872-byte region [ffff8003496a3f80, ffff8003496a5e40)
The buggy address belongs to the page:
page:ffff7e000d25a800 count:1 mapcount:0 mapping:ffff80036ce4b000
index:0x0 compound_mapcount: 0
flags: 0xffffe0000008100(slab|head)
raw: 0ffffe0000008100 dead000000000100 dead000000000200 ffff80036ce4b000
raw: 0000000000000000 0000000080040004 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8003496a4580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8003496a4600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8003496a4680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8003496a4700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8003496a4780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Fixes: 467fa15356ac("RDS-TCP: Support multiple RDS-TCP listen endpoints, one per netns.")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski says:
====================
nfp: fix retcode and disable netpoll on representors
This series avoids a potential crash on nfp representor devices
when netpoll is in use. If transmitting the frame through underlying
vNIC fails we'd return an error code (by passing on error code from
__dev_queue_xmit()) and cause double free in netpoll code.
Fix the error code and disable netpoll on reprs altogether.
IRQ-safety of locking the queues and calling __dev_queue_xmit()
is questionable.
Big thanks to John Hurley for debugging and narrowing down
the trace log after I gave up! :)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
NFP reprs are software device on top of the PF's vNIC.
The comment above __dev_queue_xmit() sayeth:
When calling this method, interrupts MUST be enabled. This is because
the BH enable code must have IRQs enabled so that it will not deadlock.
For netconsole we can't guarantee IRQ state, let's just
disable netpoll on representors to be on the safe side.
When the initial implementation of NFP reprs was added by the
commit 5de73ee467 ("nfp: general representor implementation")
.ndo_poll_controller was required for netpoll to be enabled.
Fixes: ac3d9dd034 ("netpoll: make ndo_poll_controller() optional")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
dev_queue_xmit() may return error codes as well as netdev_tx_t,
and it always consumes the skb. Make sure we always return a
correct netdev_tx_t value.
Fixes: eadfa4c3be ("nfp: add stats and xmit helpers for representors")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net_hash_mix() currently uses kernel address of a struct net,
and is used in many places that could be used to reveal this
address to a patient attacker, thus defeating KASLR, for
the typical case (initial net namespace, &init_net is
not dynamically allocated)
I believe the original implementation tried to avoid spending
too many cycles in this function, but security comes first.
Also provide entropy regardless of CONFIG_NET_NS.
Fixes: 0b4419162a ("netns: introduce the net_hash_mix "salt" for hashes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Amit Klein <aksecurity@gmail.com>
Reported-by: Benny Pinkas <benny@pinkas.net>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add flow_dissect for qca tagged packet to get the right hash.
Signed-off-by: Xiaofei Shen <xiaofeis@codeaurora.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Kirsher says:
====================
Intel Wired LAN Driver Fixes 2019-03-26
This series contains updates to igb, ixgbe, i40e and fm10k.
Jake fixes an issue with PTP in i40e where a previous commit resulted
in a regression where the driver would interpret small negative
adjustments as large positive additions, resulting in incorrect
behavior.
Arvind Sankar fixes an issue in igb where a previous commit would cause
a warning in the PCI pm core and resulted in pci_pm_runtime_suspend
would not call pci_save_state or pci_finish_runtime_suspend.
Ivan Vecera fixes MDIO bus registration with ixgbe, where the driver was
ignoring errors returned when registering and would leave the pointer in
a NULL state which triggered a BUG when un-registering.
Stefan Assmann fixes the check for Wake-On-LAN for i40e, which only
supports magic packet.
Yue Haibing fixes a potential NULL pointer de-reference in fm10k by
adding a simple check if the value is NULL.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fix refcount underflows in bridge loop avoidance code,
by Sven Eckelmann (3 patches)
- Fix warning when CFG80211 isn't enabled, by Anders Roxell
- Fix genl notification for throughput override, by Sven Eckelmann
-----BEGIN PGP SIGNATURE-----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=+6Ww
-----END PGP SIGNATURE-----
Merge tag 'batadv-net-for-davem-20190328' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here are some batman-adv bugfixes:
- Fix refcount underflows in bridge loop avoidance code,
by Sven Eckelmann (3 patches)
- Fix warning when CFG80211 isn't enabled, by Anders Roxell
- Fix genl notification for throughput override, by Sven Eckelmann
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The DPDK project is moving forward with its AF_XDP PMD, and during
that process some libbpf issues surfaced [1]: When libbpf was built
as a shared library, libelf was not included in the linking phase.
Since libelf is an internal depedency to libbpf, libelf should be
included. This patch adds '-lelf' to resolve that.
[1] https://patches.dpdk.org/patch/50704/#93571
Fixes: 1b76c13e4b ("bpf tools: Introduce 'bpf' library and add bpf feature check")
Suggested-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The xsk.h header file was missing from the install_headers target in
the Makefile. This patch simply adds xsk.h to the set of installed
headers.
Fixes: 1cad078842 ("libbpf: add support for using AF_XDP sockets")
Reported-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
VRF devices don't work with upper devices. Currently, it's possible to
add a VRF device to a bridge or team, and to create macvlan, macsec, or
ipvlan devices on top of a VRF (bond and vlan are prevented respectively
by the lack of an ndo_set_mac_address op and the NETIF_F_VLAN_CHALLENGED
feature flag).
Fix this by setting the IFF_NO_RX_HANDLER flag (introduced in commit
f5426250a6 ("net: introduce IFF_NO_RX_HANDLER")).
Cc: David Ahern <dsahern@gmail.com>
Fixes: 193125dbd8 ("net: Introduce VRF device driver")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dean Nelson says:
====================
thunderx: fix receive buffer page recycling
In attempting to optimize receive buffer page recycling for XDP, commit
773225388d ("net: thunderx: Optimize page recycling for XDP")
inadvertently introduced two problems for the non-XDP case, that will be
addressed by this patch series.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
For the non-XDP case, commit 773225388d ("net: thunderx: Optimize
page recycling for XDP") added code to nicvf_free_rbdr() that, when releasing
the additional receive buffer page reference held for recycling, repeatedly
calls put_page() until the page's _refcount goes to zero. Which results in
the page being freed.
This is not okay if the page's _refcount was greater than 1 (in the non-XDP
case), because nicvf_free_rbdr() should not be subtracting more than what
nicvf_alloc_page() had previously added to the page's _refcount, which was
only 1 (in the non-XDP case).
This can arise if a received packet is still being processed and the receive
buffer (i.e., skb->head) has not yet been freed via skb_free_head() when
nicvf_free_rbdr() is spinning through the aforementioned put_page() loop.
If this should occur, when the received packet finishes processing and
skb_free_head() is called, various problems can ensue. Exactly what, depends on
whether the page has already been reallocated or not, anything from "BUG: Bad
page state ... ", to "Unable to handle kernel NULL pointer dereference ..." or
"Unable to handle kernel paging request...".
So this patch changes nicvf_free_rbdr() to only call put_page() once for pages
held for recycling (in the non-XDP case).
Fixes: 773225388d ("net: thunderx: Optimize page recycling for XDP")
Signed-off-by: Dean Nelson <dnelson@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
