Vt-d spec rev3.0 (section 6.2.3.1) requires that each pasid
entry for first-level or pass-through translation should be
programmed with a domain id different from those used for
second-level or nested translation. It is recommended that
software could use a same domain id for all first-only and
pass-through translations.
This reserves a domain id for first-level and pass-through
translations.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Cc: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Intel vt-d spec rev3.0 requires software to use 256-bit
descriptors in invalidation queue. As the spec reads in
section 6.5.2:
Remapping hardware supporting Scalable Mode Translations
(ECAP_REG.SMTS=1) allow software to additionally program
the width of the descriptors (128-bits or 256-bits) that
will be written into the Queue. Software should setup the
Invalidation Queue for 256-bit descriptors before progra-
mming remapping hardware for scalable-mode translation as
128-bit descriptors are treated as invalid descriptors
(see Table 21 in Section 6.5.2.10) in scalable-mode.
This patch adds 256-bit invalidation descriptor support
if the hardware presents scalable mode capability.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
So that they could also be used in other source files.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Cc: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In scalable mode, pasid structure is a two level table with
a pasid directory table and a pasid table. Any pasid entry
can be identified by a pasid value in below way.
1
9 6 5 0
.-----------------------.-------.
| PASID | |
'-----------------------'-------' .-------------.
| | | |
| | | |
| | | |
| .-----------. | .-------------.
| | | |----->| PASID Entry |
| | | | '-------------'
| | | |Plus | |
| .-----------. | | |
|---->| DIR Entry |-------->| |
| '-----------' '-------------'
.---------. |Plus | |
| Context | | | |
| Entry |------->| |
'---------' '-----------'
This changes the pasid table APIs to support scalable mode
PASID directory and PASID table. It also adds a helper to
get the PASID table entry according to the pasid value.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Intel vt-d spec rev3.0 introduces a new translation
mode called scalable mode, which enables PASID-granular
translations for first level, second level, nested and
pass-through modes. At the same time, the previous
Extended Context (ECS) mode is deprecated (no production
ever implements ECS).
This patch adds enumeration for Scalable Mode and removes
the deprecated ECS enumeration. It provides a boot time
option to disable scalable mode even hardware claims to
support it.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Change function __iommu_dma_alloc_pages() to allocate pages for DMA from
respective device NUMA node. The ternary operator which would be for
alloc_pages_node() is tidied along with this.
The motivation for this change is to have a policy for page allocation
consistent with direct DMA mapping, which attempts to allocate pages local
to the device, as mentioned in [1].
In addition, for certain workloads it has been observed a marginal
performance improvement. The patch caused an observation of 0.9% average
throughput improvement for running tcrypt with HiSilicon crypto engine.
We also include a modification to use kvzalloc() for kzalloc()/vzalloc()
combination.
[1] https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1692998.html
Signed-off-by: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
[JPG: Added kvzalloc(), drop pages ** being device local, remove ternary operator, update message]
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
qcom,smmu-v2 is an arm,smmu-v2 implementation with specific
clock and power requirements.
On msm8996, multiple cores, viz. mdss, video, etc. use this
smmu. On sdm845, this smmu is used with gpu.
Add bindings for the same.
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Finally add the device link between the master device and
smmu, so that the smmu gets runtime enabled/disabled only when the
master needs it. This is done from add_device callback which gets
called once when the master is added to the smmu.
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Enable pm-runtime on devices that implement a pm domain. Then,
add pm runtime hooks to several iommu_ops to power cycle the
smmu device for explicit TLB invalidation requests, and
register space accesses, etc.
We need these hooks when the smmu, linked to its master through
device links, has to be powered-up without the master device
being in context.
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
[vivek: Cleanup pm runtime calls]
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The smmu needs to be functional only when the respective
master's using it are active. The device_link feature
helps to track such functional dependencies, so that the
iommu gets powered when the master device enables itself
using pm_runtime. So by adapting the smmu driver for
runtime pm, above said dependency can be addressed.
This patch adds the pm runtime/sleep callbacks to the
driver and the corresponding bulk clock handling for all
the clocks needed by smmu.
Also, while we enable the runtime pm, add a pm sleep suspend
callback that pushes devices to low power state by turning
the clocks off in a system sleep.
Add corresponding clock enable path in resume callback as well.
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
[Thor: Rework to get clocks from device tree]
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
[vivek: rework for clock and pm ops]
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
After removing an entry from a queue (e.g. reading an event in
arm_smmu_evtq_thread()) it is necessary to advance the MMIO consumer
pointer to free the queue slot back to the SMMU. A memory barrier is
required here so that all reads targetting the queue entry have
completed before the consumer pointer is updated.
The implementation of queue_inc_cons() relies on a writel() to complete
the previous reads, but this is incorrect because writel() is only
guaranteed to complete prior writes. This patch replaces the call to
writel() with an mb(); writel_relaxed() sequence, which gives us the
read->write ordering which we require.
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The GITS_TRANSLATER MMIO doorbell register in the ITS hardware is
architected to be 4 bytes in size, yet on hi1620 and earlier, Hisilicon
have allocated the adjacent 4 bytes to carry some IMPDEF sideband
information which results in an 8-byte MSI payload being delivered when
signalling an interrupt:
MSIAddr:
|----4bytes----|----4bytes----|
| MSIData | IMPDEF |
This poses no problem for the ITS hardware because the adjacent 4 bytes
are reserved in the memory map. However, when delivering MSIs to memory,
as we do in the SMMUv3 driver for signalling the completion of a SYNC
command, the extended payload will corrupt the 4 bytes adjacent to the
"sync_count" member in struct arm_smmu_device. Fortunately, the current
layout allocates these bytes to padding, but this is fragile and we
should make this explicit.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
[will: Rewrote commit message and comment]
Signed-off-by: Will Deacon <will.deacon@arm.com>
When we insert the sync sequence number into the CMD_SYNC.MSIData field,
we do so in CPU-native byte order, before writing out the whole command
as explicitly little-endian dwords. Thus on big-endian systems, the SMMU
will receive and write back a byteswapped version of sync_nr, which would
be perfect if it were targeting a similarly-little-endian ITS, but since
it's actually writing back to memory being polled by the CPUs, they're
going to end up seeing the wrong thing.
Since the SMMU doesn't care what the MSIData actually contains, the
minimal-overhead solution is to simply add an extra byteswap initially,
such that it then writes back the big-endian format directly.
Cc: <stable@vger.kernel.org>
Fixes: 37de98f8f1 ("iommu/arm-smmu-v3: Use CMD_SYNC completion MSI")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The parameter is still there but it's ignored. We need to check its
value before deciding to go into passthrough mode for AMD IOMMU v2
capable device.
We occasionally use this parameter to force v2 capable device into
translation mode to debug memory corruption that we suspect is
caused by DMA writes.
To address the following comment from Joerg Roedel on the first
version, v2 capability of device is completely ignored.
> This breaks the iommu_v2 use-case, as it needs a direct mapping for the
> devices that support it.
And from Documentation/admin-guide/kernel-parameters.txt:
This option does not override iommu=pt
Fixes: aafd8ba0ca ("iommu/amd: Implement add_device and remove_device")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Return DMA_MAPPING_ERROR instead of 0 on a dma mapping failure and let
the core dma-mapping code handle the rest.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Return DMA_MAPPING_ERROR instead of 0 on a dma mapping failure and let
the core dma-mapping code handle the rest.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Pass the page + offset to the low-level __iommu_map_single helper
(which gets renamed to fit the new calling conventions) as both
callers have the page at hand.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Return DMA_MAPPING_ERROR instead of 0 on a dma mapping failure and let
the core dma-mapping code handle the rest.
Note that the existing code used AMD_IOMMU_MAPPING_ERROR to check from
a 0 return from the IOVA allocator, which is replaced with an explicit
0 as in the implementation and other users of that interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently Linux automatically enables ATS (Address Translation Service)
for any device that supports it (and IOMMU is turned on). ATS is used to
accelerate DMA access as the device can cache translations locally so
there is no need to do full translation on IOMMU side. However, as
pointed out in [1] ATS can be used to bypass IOMMU based security
completely by simply sending PCIe read/write transaction with AT
(Address Translation) field set to "translated".
To mitigate this modify the Intel IOMMU code so that it does not enable
ATS for any device that is marked as being untrusted. In case this turns
out to cause performance issues we may selectively allow ATS based on
user decision but currently use big hammer and disable it completely to
be on the safe side.
[1] https://www.repository.cam.ac.uk/handle/1810/274352
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Acked-by: Joerg Roedel <jroedel@suse.de>
Intel VT-d spec added a new DMA_CTRL_PLATFORM_OPT_IN_FLAG flag in DMAR
ACPI table [1] for BIOS to report compliance about platform initiated
DMA restricted to RMRR ranges when transferring control to the OS. This
means that during OS boot, before it enables IOMMU none of the connected
devices can bypass DMA protection for instance by overwriting the data
structures used by the IOMMU. The OS also treats this as a hint that the
IOMMU should be enabled to prevent DMA attacks from possible malicious
devices.
A use of this flag is Kernel DMA protection for Thunderbolt [2] which in
practice means that IOMMU should be enabled for PCIe devices connected
to the Thunderbolt ports. With IOMMU enabled for these devices, all DMA
operations are limited in the range reserved for it, thus the DMA
attacks are prevented. All these devices are enumerated in the PCI/PCIe
module and marked with an untrusted flag.
This forces IOMMU to be enabled if DMA_CTRL_PLATFORM_OPT_IN_FLAG is set
in DMAR ACPI table and there are PCIe devices marked as untrusted in the
system. This can be turned off by adding "intel_iommu=off" in the kernel
command line, if any problems are found.
[1] https://software.intel.com/sites/default/files/managed/c5/15/vt-directed-io-spec.pdf
[2] https://docs.microsoft.com/en-us/windows/security/information-protection/kernel-dma-protection-for-thunderbolt
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Acked-by: Joerg Roedel <jroedel@suse.de>
The Kconfig currently controlling compilation of this code is:
drivers/iommu/Kconfig:config ARM_SMMU_V3
drivers/iommu/Kconfig: bool "ARM Ltd. System MMU Version 3 (SMMUv3) Support"
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.
Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.
We explicitly disallow a driver unbind, since that doesn't have a
sensible use case anyway, but unlike most drivers, we can't delete the
function tied to the ".remove" field. This is because as of commit
7aa8619a66 ("iommu/arm-smmu-v3: Implement shutdown method") the
.remove function was given a one line wrapper and re-used to provide a
.shutdown service. So we delete the wrapper and re-name the function
from remove to shutdown.
We add a moduleparam.h include since the file does actually declare
some module parameters, and leaving them as such is the easiest way
currently to remain backwards compatible with existing use cases.
Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.
Cc: Will Deacon <will.deacon@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Nate Watterson <nwatters@codeaurora.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: iommu@lists.linux-foundation.org
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Kconfig currently controlling compilation of this code is:
drivers/iommu/Kconfig:config ARM_SMMU
drivers/iommu/Kconfig: bool "ARM Ltd. System MMU (SMMU) Support"
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.
Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.
We explicitly disallow a driver unbind, since that doesn't have a
sensible use case anyway, but unlike most drivers, we can't delete the
function tied to the ".remove" field. This is because as of commit
7aa8619a66 ("iommu/arm-smmu-v3: Implement shutdown method") the
.remove function was given a one line wrapper and re-used to provide a
.shutdown service. So we delete the wrapper and re-name the function
from remove to shutdown.
We add a moduleparam.h include since the file does actually declare
some module parameters, and leaving them as such is the easiest way
currently to remain backwards compatible with existing use cases.
We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.
Cc: Will Deacon <will.deacon@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Nate Watterson <nwatters@codeaurora.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: iommu@lists.linux-foundation.org
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Kconfig currently controlling compilation of this code is:
drivers/iommu/Kconfig:config TEGRA_IOMMU_GART
drivers/iommu/Kconfig: bool "Tegra GART IOMMU Support"
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.
We explicitly disallow a driver unbind, since that doesn't have a
sensible use case anyway, and it allows us to drop the ".remove"
code for non-modular drivers.
Since module_init was not in use by this code, the init ordering
remains unchanged with this commit.
We replace module.h with moduleparam.h since the file does actually
declare some module_param() and the easiest way to keep back
compatibility with existing use cases is to leave it as-is for now.
The init function was missing an __init annotation, so it was added.
We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.
Cc: Hiroshi Doyu <hdoyu@nvidia.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-tegra@vger.kernel.org
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Kconfig currently controlling compilation of this code is:
drivers/iommu/Kconfig:config MTK_IOMMU_V1
drivers/iommu/Kconfig: bool "MTK IOMMU Version 1 (M4U gen1) Support"
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.
Since module_init just becomes device_initcall for non-modules, the
init ordering remains unchanged with this commit.
Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: iommu@lists.linux-foundation.org
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Kconfig currently controlling compilation of this code is:
drivers/iommu/Kconfig:config IPMMU_VMSA
drivers/iommu/Kconfig: bool "Renesas VMSA-compatible IPMMU"
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.
Since module_init was not even used by this driver, the init ordering
remains unchanged with this commit.
We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.
Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: iommu@lists.linux-foundation.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Kconfig currently controlling compilation of this code is:
drivers/iommu/Kconfig:config MTK_IOMMU_V1
drivers/iommu/Kconfig: bool "MTK IOMMU Version 1 (M4U gen1) Support"
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.
Since module_init was not even used by this driver, the init ordering
remains unchanged with this commit.
We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Honghui Zhang <honghui.zhang@mediatek.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-mediatek@lists.infradead.org
Acked-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Kconfig currently controlling compilation of this code is:
drivers/iommu/Kconfig:config MSM_IOMMU
drivers/iommu/Kconfig: bool "MSM IOMMU Support"
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.
Since module_init was not even used by this driver, the init ordering
remains unchanged with this commit.
We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Stepan Moskovchenko <stepanm@codeaurora.org>
Cc: iommu@lists.linux-foundation.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Kconfig currently controlling compilation of this code is:
drivers/iommu/Kconfig:config ROCKCHIP_IOMMU
drivers/iommu/Kconfig: bool "Rockchip IOMMU Support"
...meaning that it currently is not being built as a module by anyone.
The bind/unbind/remove was already explicitly disabled in commit
98b72b94de ("iommu/rockchip: Prohibit unbind and remove").
Lets remove the remaining traces of modular infrastructure, so that
when reading the driver there is no doubt it is builtin-only.
Since module_init was not in use by this code, the init ordering
remains unchanged with this commit.
Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Simon Xue <xxm@rock-chips.com>
Cc: Daniel Kurtz <djkurtz@chromium.org>
Cc: Jeffy Chen <jeffy.chen@rock-chips.com>
Cc: iommu@lists.linux-foundation.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Historically a lot of these existed because we did not have
a distinction between what was modular code and what was providing
support to modules via EXPORT_SYMBOL and friends. That changed
when we forked out support for the latter into the export.h file.
This means we should be able to reduce the usage of module.h
in code that is obj-y Makefile or bool Kconfig.
The advantage in removing such instances is that module.h itself
sources about 15 other headers; adding significantly to what we feed
cpp, and it can obscure what headers we are effectively using.
Since module.h might have been the implicit source for init.h
(for __init) and for export.h (for EXPORT_SYMBOL) we consider each
instance for the presence of either and replace as needed.
Cc: Joerg Roedel <joro@8bytes.org>
Cc: iommu@lists.linux-foundation.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
To avoid adding copy and pasted strcmp codes in the future,
this patch adds an array "rcar_gen3_slave_whitelist" to check
whether the device can work with the IPMMU or not.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Some R-Car Gen3 SoCs has hardware restrictions on the IPMMU. So,
to check whether this R-Car Gen3 SoC can use the IPMMU correctly,
this patch modifies the ipmmu_slave_whitelist().
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
With the switch to dev_err for reporting errors from the
iommu log there was an unwanted newline introduced. The
reason was that the reporting was done in multiple dev_err()
calls, and dev_err adds a newline after every call.
Fix it by printing the log messages with only one dev_err()
call.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Because we already have the DEFINE_SHOW_ATTRIBUTE,there is no need
to define such a macro.So remove DEBUG_SEQ_FOPS_RO.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Intel IOMMU driver opportunistically skips a few top level page
tables from the domain paging directory while programming the IOMMU
context entry. However there is an implicit assumption in the code that
domain's adjusted guest address width (agaw) would always be greater
than IOMMU's agaw.
The IOMMU capabilities in an upcoming platform cause the domain's agaw
to be lower than IOMMU's agaw. The issue is seen when the IOMMU supports
both 4-level and 5-level paging. The domain builds a 4-level page table
based on agaw of 2. However the IOMMU's agaw is set as 3 (5-level). In
this case the code incorrectly tries to skip page page table levels.
This causes the IOMMU driver to avoid programming the context entry. The
fix handles this case and programs the context entry accordingly.
Fixes: de24e55395 ("iommu/vt-d: Simplify domain_context_mapping_one")
Cc: <stable@vger.kernel.org>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reported-by: Ramos Falcon, Ernesto R <ernesto.r.ramos.falcon@intel.com>
Tested-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
memunmap() should be used to free the return of memremap(), not
iounmap().
Fixes: dfddb969ed ('iommu/vt-d: Switch from ioremap_cache to memremap')
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Before this patch the iommu_map_page() function failed when
it tried to map a huge-page where smaller mappings existed
before.
With this change the page-table pages of the old mappings
are teared down, so that the huge-page can be mapped.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This makes sure that __pte always contains the correct value
when the pointer to the next page-table level is derived.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Before this patch it was not possible the downgrade a
mapping established with page-mode 7 to a mapping using
smaller page-sizes, because the pte_level != level check
prevented that.
Treat page-mode 7 like a non-present mapping and allow to
overwrite it in alloc_pte().
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The function is a more generic version of free_pagetable()
and will be used to free only specific sub-trees of a
page-table.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Collect all pages that belong to a page-table in a list and
free them after the tree has been traversed. This allows to
implement safer page-table updates in subsequent patches.
Also move the functions for page-table freeing a bit upwards
in the file so that they are usable from the iommu_map() path.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This register should have been programmed with the physical address
of the memory location containing the shadow tail pointer for
the guest virtual APIC log instead of the base address.
Fixes: 8bda0cfbdc ('iommu/amd: Detect and initialize guest vAPIC log')
Signed-off-by: Filippo Sironi <sironi@amazon.de>
Signed-off-by: Wei Wang <wawei@amazon.de>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
If iommu_ops.add_device() fails, iommu_ops.domain_free() is still
called, leading to a crash, as the domain was only partially
initialized:
ipmmu-vmsa e67b0000.mmu: Cannot accommodate DMA translation for IOMMU page tables
sata_rcar ee300000.sata: Unable to initialize IPMMU context
iommu: Failed to add device ee300000.sata to group 0: -22
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000038
...
Call trace:
ipmmu_domain_free+0x1c/0xa0
iommu_group_release+0x48/0x68
kobject_put+0x74/0xe8
kobject_del.part.0+0x3c/0x50
kobject_put+0x60/0xe8
iommu_group_get_for_dev+0xa8/0x1f0
ipmmu_add_device+0x1c/0x40
of_iommu_configure+0x118/0x190
Fix this by checking if the domain's context already exists, before
trying to destroy it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Fixes: d25a2a16f0 ('iommu: Add driver for Renesas VMSA-compatible IPMMU')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When handling page request without pasid event, go to "no_pasid"
branch instead of "bad_req". Otherwise, a NULL pointer deference
will happen there.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Fixes: a222a7f0bb 'iommu/vt-d: Implement page request handling'
Signed-off-by: Joerg Roedel <jroedel@suse.de>
iommu_ops are not supposed to change at runtime.
Functions 'iommu_device_set_ops' and 'bus_set_iommu' working with
const iommu_ops provided by <linux/iommu.h>. So mark the non-const
structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
(Change the title to iommu/mediatek: xx)
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The original motivation for iommu_map_sg() was to give IOMMU drivers the
chance to map an IOVA-contiguous scatterlist as efficiently as they
could. It turns out that there isn't really much driver-specific
business involved there, so now that the default implementation is
mandatory let's just improve that - the main thing we're after is to use
larger pages wherever possible, and as long as domain->pgsize_bitmap
reflects reality, iommu_map() can already do that in a generic way. All
we need to do is detect physically-contiguous segments and batch them
into a single map operation, since whatever we do here is transparent to
our caller and not bound by any segment-length restrictions on the list
itself.
Speaking of efficiency, there's really very little point in duplicating
the checks that iommu_map() is going to do anyway, so those get cleared
up in the process.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Move remaining definitions and declarations from include/linux/bootmem.h
into include/linux/memblock.h and remove the redundant header.
The includes were replaced with the semantic patch below and then
semi-automated removal of duplicated '#include <linux/memblock.h>
@@
@@
- #include <linux/bootmem.h>
+ #include <linux/memblock.h>
[sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au
[sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au
[sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal]
Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au
Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge updates from Andrew Morton:
- a few misc things
- ocfs2 updates
- most of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (132 commits)
hugetlbfs: dirty pages as they are added to pagecache
mm: export add_swap_extent()
mm: split SWP_FILE into SWP_ACTIVATED and SWP_FS
tools/testing/selftests/vm/map_fixed_noreplace.c: add test for MAP_FIXED_NOREPLACE
mm: thp: relocate flush_cache_range() in migrate_misplaced_transhuge_page()
mm: thp: fix mmu_notifier in migrate_misplaced_transhuge_page()
mm: thp: fix MADV_DONTNEED vs migrate_misplaced_transhuge_page race condition
mm/kasan/quarantine.c: make quarantine_lock a raw_spinlock_t
mm/gup: cache dev_pagemap while pinning pages
Revert "x86/e820: put !E820_TYPE_RAM regions into memblock.reserved"
mm: return zero_resv_unavail optimization
mm: zero remaining unavailable struct pages
tools/testing/selftests/vm/gup_benchmark.c: add MAP_HUGETLB option
tools/testing/selftests/vm/gup_benchmark.c: add MAP_SHARED option
tools/testing/selftests/vm/gup_benchmark.c: allow user specified file
tools/testing/selftests/vm/gup_benchmark.c: fix 'write' flag usage
mm/gup_benchmark.c: add additional pinning methods
mm/gup_benchmark.c: time put_page()
mm: don't raise MEMCG_OOM event due to failed high-order allocation
mm/page-writeback.c: fix range_cyclic writeback vs writepages deadlock
...
Revert 5ff7091f5a ("mm, mmu_notifier: annotate mmu notifiers with
blockable invalidate callbacks").
MMU_INVALIDATE_DOES_NOT_BLOCK flags was the only one used and it is no
longer needed since 93065ac753 ("mm, oom: distinguish blockable mode for
mmu notifiers"). We now have a full support for per range !blocking
behavior so we can drop the stop gap workaround which the per notifier
flag was used for.
Link: http://lkml.kernel.org/r/20180827112623.8992-4-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Sync dtc with upstream version v1.4.7-14-gc86da84d30e4
- Work to get rid of direct accesses to struct device_node name and
type pointers in preparation for removing them. New helpers for
parsing DT cpu nodes and conversions to use the helpers. printk
conversions to %pOFn for printing DT node names. Most went thru
subystem trees, so this is the remainder.
- Fixes to DT child node lookups to actually be restricted to child
nodes instead of treewide.
- Refactoring of dtb targets out of arch code. This makes the support
more uniform and enables building all dtbs on c6x, microblaze, and
powerpc.
- Various DT binding updates for Renesas r8a7744 SoC
- Vendor prefixes for Facebook, OLPC
- Restructuring of some ARM binding docs moving some peripheral bindings
out of board/SoC binding files
- New "secure-chosen" binding for secure world settings on ARM
- Dual licensing of 2 DT IRQ binding headers
-----BEGIN PGP SIGNATURE-----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=335v
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull Devicetree updates from Rob Herring:
"A bit bigger than normal as I've been busy this cycle.
There's a few things with dependencies and a few things subsystem
maintainers didn't pick up, so I'm taking them thru my tree.
The fixes from Johan didn't get into linux-next, but they've been
waiting for some time now and they are what's left of what subsystem
maintainers didn't pick up.
Summary:
- Sync dtc with upstream version v1.4.7-14-gc86da84d30e4
- Work to get rid of direct accesses to struct device_node name and
type pointers in preparation for removing them. New helpers for
parsing DT cpu nodes and conversions to use the helpers. printk
conversions to %pOFn for printing DT node names. Most went thru
subystem trees, so this is the remainder.
- Fixes to DT child node lookups to actually be restricted to child
nodes instead of treewide.
- Refactoring of dtb targets out of arch code. This makes the support
more uniform and enables building all dtbs on c6x, microblaze, and
powerpc.
- Various DT binding updates for Renesas r8a7744 SoC
- Vendor prefixes for Facebook, OLPC
- Restructuring of some ARM binding docs moving some peripheral
bindings out of board/SoC binding files
- New "secure-chosen" binding for secure world settings on ARM
- Dual licensing of 2 DT IRQ binding headers"
* tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (78 commits)
ARM: dt: relicense two DT binding IRQ headers
power: supply: twl4030-charger: fix OF sibling-node lookup
NFC: nfcmrvl_uart: fix OF child-node lookup
net: stmmac: dwmac-sun8i: fix OF child-node lookup
net: bcmgenet: fix OF child-node lookup
drm/msm: fix OF child-node lookup
drm/mediatek: fix OF sibling-node lookup
of: Add missing exports of node name compare functions
dt-bindings: Add OLPC vendor prefix
dt-bindings: misc: bk4: Add device tree binding for Liebherr's BK4 SPI bus
dt-bindings: thermal: samsung: Add SPDX license identifier
dt-bindings: clock: samsung: Add SPDX license identifiers
dt-bindings: timer: ostm: Add R7S9210 support
dt-bindings: phy: rcar-gen2: Add r8a7744 support
dt-bindings: can: rcar_can: Add r8a7744 support
dt-bindings: timer: renesas, cmt: Document r8a7744 CMT support
dt-bindings: watchdog: renesas-wdt: Document r8a7744 support
dt-bindings: thermal: rcar: Add device tree support for r8a7744
Documentation: dt: Add binding for /secure-chosen/stdout-path
dt-bindings: arm: zte: Move sysctrl bindings to their own doc
...
These updates bring:
- Debugfs support for the Intel VT-d driver. When enabled, it
now also exposes some of its internal data structures to
user-space for debugging purposes.
- ARM-SMMU driver now uses the generic deferred flushing
and fast-path iova allocation code. This is expected to be a
major performance improvement, as this allocation path scales
a lot better.
- Support for r8a7744 in the Renesas iommu driver
- Couple of minor fixes and improvements all over the place
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=q1HJ
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
- Debugfs support for the Intel VT-d driver.
When enabled, it now also exposes some of its internal data
structures to user-space for debugging purposes.
- ARM-SMMU driver now uses the generic deferred flushing and fast-path
iova allocation code.
This is expected to be a major performance improvement, as this
allocation path scales a lot better.
- Support for r8a7744 in the Renesas iommu driver
- Couple of minor fixes and improvements all over the place
* tag 'iommu-updates-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (39 commits)
iommu/arm-smmu-v3: Remove unnecessary wrapper function
iommu/arm-smmu-v3: Add SPDX header
iommu/amd: Add default branch in amd_iommu_capable()
dt-bindings: iommu: ipmmu-vmsa: Add r8a7744 support
iommu/amd: Move iommu_init_pci() to .init section
iommu/arm-smmu: Support non-strict mode
iommu/io-pgtable-arm-v7s: Add support for non-strict mode
iommu/arm-smmu-v3: Add support for non-strict mode
iommu/io-pgtable-arm: Add support for non-strict mode
iommu: Add "iommu.strict" command line option
iommu/dma: Add support for non-strict mode
iommu/arm-smmu: Ensure that page-table updates are visible before TLBI
iommu/arm-smmu-v3: Implement flush_iotlb_all hook
iommu/arm-smmu-v3: Avoid back-to-back CMD_SYNC operations
iommu/arm-smmu-v3: Fix unexpected CMD_SYNC timeout
iommu/io-pgtable-arm: Fix race handling in split_blk_unmap()
iommu/arm-smmu-v3: Fix a couple of minor comment typos
iommu: Fix a typo
iommu: Remove .domain_{get,set}_windows
iommu: Tidy up window attributes
...
ARM:
- Improved guest IPA space support (32 to 52 bits)
- RAS event delivery for 32bit
- PMU fixes
- Guest entry hardening
- Various cleanups
- Port of dirty_log_test selftest
PPC:
- Nested HV KVM support for radix guests on POWER9. The performance is
much better than with PR KVM. Migration and arbitrary level of
nesting is supported.
- Disable nested HV-KVM on early POWER9 chips that need a particular hardware
bug workaround
- One VM per core mode to prevent potential data leaks
- PCI pass-through optimization
- merge ppc-kvm topic branch and kvm-ppc-fixes to get a better base
s390:
- Initial version of AP crypto virtualization via vfio-mdev
- Improvement for vfio-ap
- Set the host program identifier
- Optimize page table locking
x86:
- Enable nested virtualization by default
- Implement Hyper-V IPI hypercalls
- Improve #PF and #DB handling
- Allow guests to use Enlightened VMCS
- Add migration selftests for VMCS and Enlightened VMCS
- Allow coalesced PIO accesses
- Add an option to perform nested VMCS host state consistency check
through hardware
- Automatic tuning of lapic_timer_advance_ns
- Many fixes, minor improvements, and cleanups
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJb0FINAAoJEED/6hsPKofoI60IAJRS3vOAQ9Fav8cJsO1oBHcX
3+NexfnBke1bzrjIR3SUcHKGZbdnVPNZc+Q4JjIbPpPmmOMU5jc9BC1dmd5f4Vzh
BMnQ0yCvgFv3A3fy/Icx1Z8NJppxosdmqdQLrQrNo8aD3cjnqY2yQixdXrAfzLzw
XEgKdIFCCz8oVN/C9TT4wwJn6l9OE7BM5bMKGFy5VNXzMu7t64UDOLbbjZxNgi1g
teYvfVGdt5mH0N7b2GPPWRbJmgnz5ygVVpVNQUEFrdKZoCm6r5u9d19N+RRXAwan
ZYFj10W2T8pJOUf3tryev4V33X7MRQitfJBo4tP5hZfi9uRX89np5zP1CFE7AtY=
=yEPW
-----END PGP SIGNATURE-----
Merge tag 'kvm-4.20-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Radim Krčmář:
"ARM:
- Improved guest IPA space support (32 to 52 bits)
- RAS event delivery for 32bit
- PMU fixes
- Guest entry hardening
- Various cleanups
- Port of dirty_log_test selftest
PPC:
- Nested HV KVM support for radix guests on POWER9. The performance
is much better than with PR KVM. Migration and arbitrary level of
nesting is supported.
- Disable nested HV-KVM on early POWER9 chips that need a particular
hardware bug workaround
- One VM per core mode to prevent potential data leaks
- PCI pass-through optimization
- merge ppc-kvm topic branch and kvm-ppc-fixes to get a better base
s390:
- Initial version of AP crypto virtualization via vfio-mdev
- Improvement for vfio-ap
- Set the host program identifier
- Optimize page table locking
x86:
- Enable nested virtualization by default
- Implement Hyper-V IPI hypercalls
- Improve #PF and #DB handling
- Allow guests to use Enlightened VMCS
- Add migration selftests for VMCS and Enlightened VMCS
- Allow coalesced PIO accesses
- Add an option to perform nested VMCS host state consistency check
through hardware
- Automatic tuning of lapic_timer_advance_ns
- Many fixes, minor improvements, and cleanups"
* tag 'kvm-4.20-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits)
KVM/nVMX: Do not validate that posted_intr_desc_addr is page aligned
Revert "kvm: x86: optimize dr6 restore"
KVM: PPC: Optimize clearing TCEs for sparse tables
x86/kvm/nVMX: tweak shadow fields
selftests/kvm: add missing executables to .gitignore
KVM: arm64: Safety check PSTATE when entering guest and handle IL
KVM: PPC: Book3S HV: Don't use streamlined entry path on early POWER9 chips
arm/arm64: KVM: Enable 32 bits kvm vcpu events support
arm/arm64: KVM: Rename function kvm_arch_dev_ioctl_check_extension()
KVM: arm64: Fix caching of host MDCR_EL2 value
KVM: VMX: enable nested virtualization by default
KVM/x86: Use 32bit xor to clear registers in svm.c
kvm: x86: Introduce KVM_CAP_EXCEPTION_PAYLOAD
kvm: vmx: Defer setting of DR6 until #DB delivery
kvm: x86: Defer setting of CR2 until #PF delivery
kvm: x86: Add payload operands to kvm_multiple_exception
kvm: x86: Add exception payload fields to kvm_vcpu_events
kvm: x86: Add has_payload and payload to kvm_queued_exception
KVM: Documentation: Fix omission in struct kvm_vcpu_events
KVM: selftests: add Enlightened VMCS test
...
Pull x86 mm updates from Ingo Molnar:
"Lots of changes in this cycle:
- Lots of CPA (change page attribute) optimizations and related
cleanups (Thomas Gleixner, Peter Zijstra)
- Make lazy TLB mode even lazier (Rik van Riel)
- Fault handler cleanups and improvements (Dave Hansen)
- kdump, vmcore: Enable kdumping encrypted memory with AMD SME
enabled (Lianbo Jiang)
- Clean up VM layout documentation (Baoquan He, Ingo Molnar)
- ... plus misc other fixes and enhancements"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
x86/stackprotector: Remove the call to boot_init_stack_canary() from cpu_startup_entry()
x86/mm: Kill stray kernel fault handling comment
x86/mm: Do not warn about PCI BIOS W+X mappings
resource: Clean it up a bit
resource: Fix find_next_iomem_res() iteration issue
resource: Include resource end in walk_*() interfaces
x86/kexec: Correct KEXEC_BACKUP_SRC_END off-by-one error
x86/mm: Remove spurious fault pkey check
x86/mm/vsyscall: Consider vsyscall page part of user address space
x86/mm: Add vsyscall address helper
x86/mm: Fix exception table comments
x86/mm: Add clarifying comments for user addr space
x86/mm: Break out user address space handling
x86/mm: Break out kernel address space handling
x86/mm: Clarify hardware vs. software "error_code"
x86/mm/tlb: Make lazy TLB mode lazier
x86/mm/tlb: Add freed_tables element to flush_tlb_info
x86/mm/tlb: Add freed_tables argument to flush_tlb_mm_range
smp,cpumask: introduce on_each_cpu_cond_mask
smp: use __cpumask_set_cpu in on_each_cpu_cond
...
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQW3WBGcnu5yJnSXn0kTJLX0iGMLAUCW84v0RQcdG9ueS5sdWNr
QGludGVsLmNvbQAKCRAkTJLX0iGMLGJGAP9fUhp7O4ef6PHxGtvmKHRqkTX6a4b5
/oASkd4qIetgzAEA7hwUopUllbq13IRqc+1Z93wymj4vGjT+jV+2unI0ZAc=
=3Yoq
-----END PGP SIGNATURE-----
Merge tag 'please-pull-next' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux
Pull ia64 updates from Tony Luck:
"Miscellaneous ia64 fixes from Christoph"
* tag 'please-pull-next' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
intel-iommu: mark intel_dma_ops static
ia64: remove machvec_dma_sync_{single,sg}
ia64/sn2: remove no-ops dma sync methods
ia64: remove the unused iommu_dma_init function
ia64: remove the unused pci_iommu_shutdown function
ia64: remove the unused bad_dma_address symbol
ia64: remove iommu_dma_supported
ia64: remove the dead iommu_sac_force variable
ia64: remove the kern_mem_attribute export
Simplify the code by removing an unnecessary wrapper function.
This was left behind by commit 2f657add07
("iommu/arm-smmu-v3: Specialise CMD_SYNC handling")
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Replace license text with SDPX header
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Recent gcc warns about switching on an enumeration, but not having
an explicit case statement for all members of the enumeration. To
show the compiler this is intentional, we simply add a default case
with nothing more than a break statement.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Boris Ostrovsky reported a memory leak with device passthrough when SME
is active.
The VFIO driver uses iommu_iova_to_phys() to get the physical address for
an iova. This physical address is later passed into vfio_unmap_unpin() to
unpin the memory. The vfio_unmap_unpin() uses pfn_valid() before unpinning
the memory. The pfn_valid() check was failing because encryption mask was
part of the physical address returned. This resulted in the memory not
being unpinned and therefore leaked after the guest terminates.
The memory encryption mask must be cleared from the physical address in
iommu_iova_to_phys().
Fixes: 2543a786aa ("iommu/amd: Allow the AMD IOMMU to work with memory encryption")
Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: <iommu@lists.linux-foundation.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: kvm@vger.kernel.org
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: <stable@vger.kernel.org> # 4.14+
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
All we need is to wire up .flush_iotlb_all properly and implement the
domain attribute, and iommu-dma and io-pgtable will do the rest for us.
The only real subtlety is documenting the barrier semantics we're
introducing between io-pgtable and the drivers for non-strict flushes.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
As for LPAE, it's simply a case of skipping the leaf invalidation for a
regular unmap, and ensuring that the one in split_blk_unmap() is paired
with an explicit sync ASAP rather than relying on one which might only
eventually happen way down the line.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Now that io-pgtable knows how to dodge strict TLB maintenance, all
that's left to do is bridge the gap between the IOMMU core requesting
DOMAIN_ATTR_DMA_USE_FLUSH_QUEUE for default domains, and showing the
appropriate IO_PGTABLE_QUIRK_NON_STRICT flag to alloc_io_pgtable_ops().
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
[rm: convert to domain attribute, tweak commit message]
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Non-strict mode is simply a case of skipping 'regular' leaf TLBIs, since
the sync is already factored out into ops->iotlb_sync at the core API
level. Non-leaf invalidations where we change the page table structure
itself still have to be issued synchronously in order to maintain walk
caches correctly.
To save having to reason about it too much, make sure the invalidation
in arm_lpae_split_blk_unmap() just performs its own unconditional sync
to minimise the window in which we're technically violating the break-
before-make requirement on a live mapping. This might work out redundant
with an outer-level sync for strict unmaps, but we'll never be splitting
blocks on a DMA fastpath anyway.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
[rm: tweak comment, commit message, split_blk_unmap logic and barriers]
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Add a generic command line option to enable lazy unmapping via IOVA
flush queues, which will initally be suuported by iommu-dma. This echoes
the semantics of "intel_iommu=strict" (albeit with the opposite default
value), but in the driver-agnostic fashion of "iommu.passthrough".
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
[rm: move handling out of SMMUv3 driver, clean up documentation]
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
[will: dropped broken printk when parsing command-line option]
Signed-off-by: Will Deacon <will.deacon@arm.com>
With the flush queue infrastructure already abstracted into IOVA
domains, hooking it up in iommu-dma is pretty simple. Since there is a
degree of dependency on the IOMMU driver knowing what to do to play
along, we key the whole thing off a domain attribute which will be set
on default DMA ops domains to request non-strict invalidation. That way,
drivers can indicate the appropriate support by acknowledging the
attribute, and we can easily fall back to strict invalidation otherwise.
The flush queue callback needs a handle on the iommu_domain which owns
our cookie, so we have to add a pointer back to that, but neatly, that's
also sufficient to indicate whether we're using a flush queue or not,
and thus which way to release IOVAs. The only slight subtlety is
switching __iommu_dma_unmap() from calling iommu_unmap() to explicit
iommu_unmap_fast()/iommu_tlb_sync() so that we can elide the sync
entirely in non-strict mode.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
[rm: convert to domain attribute, tweak comments and commit message]
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The IO-pgtable code relies on the driver TLB invalidation callbacks to
ensure that all page-table updates are visible to the IOMMU page-table
walker.
In the case that the page-table walker is cache-coherent, we cannot rely
on an implicit DSB from the DMA-mapping code, so we must ensure that we
execute a DSB in our tlb_add_flush() callback prior to triggering the
invalidation.
Cc: <stable@vger.kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Fixes: 2df7a25ce4 ("iommu/arm-smmu: Clean up DMA API usage")
Signed-off-by: Will Deacon <will.deacon@arm.com>
.flush_iotlb_all is currently stubbed to arm_smmu_iotlb_sync() since the
only time it would ever need to actually do anything is for callers
doing their own explicit batching, e.g.:
iommu_unmap_fast(domain, ...);
iommu_unmap_fast(domain, ...);
iommu_iotlb_flush_all(domain, ...);
where since io-pgtable still issues the TLBI commands implicitly in the
unmap instead of implementing .iotlb_range_add, the "flush" only needs
to ensure completion of those already-in-flight invalidations.
However, we're about to start using it in anger with flush queues, so
let's get a proper implementation wired up.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
[rm: document why it wasn't a bug]
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Putting adjacent CMD_SYNCs into the command queue is nonsensical, but
can happen when multiple CPUs are inserting commands. Rather than leave
the poor old hardware to chew through these operations, we can instead
drop the subsequent SYNCs and poll for completion of the first. This
has been shown to improve IO performance under pressure, where the
number of SYNC operations reduces by about a third:
CMD_SYNCs reduced: 19542181
CMD_SYNCs total: 58098548 (include reduced)
CMDs total: 116197099 (TLBI:SYNC about 1:1)
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The condition break condition of:
(int)(VAL - sync_idx) >= 0
in the __arm_smmu_sync_poll_msi() polling loop requires that sync_idx
must be increased monotonically according to the sequence of the CMDs in
the cmdq.
However, since the msidata is populated using atomic_inc_return_relaxed()
before taking the command-queue spinlock, then the following scenario
can occur:
CPU0 CPU1
msidata=0
msidata=1
insert cmd1
insert cmd0
smmu execute cmd1
smmu execute cmd0
poll timeout, because msidata=1 is overridden by
cmd0, that means VAL=0, sync_idx=1.
This is not a functional problem, since the caller will eventually either
timeout or exit due to another CMD_SYNC, however it's clearly not what
the code is supposed to be doing. Fix it, by incrementing the sequence
count with the command-queue lock held, allowing us to drop the atomic
operations altogether.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
[will: dropped the specialised cmd building routine for now]
Signed-off-by: Will Deacon <will.deacon@arm.com>
In removing the pagetable-wide lock, we gained the possibility of the
vanishingly unlikely case where we have a race between two concurrent
unmappers splitting the same block entry. The logic to handle this is
fairly straightforward - whoever loses the race frees their partial
next-level table and instead dereferences the winner's newly-installed
entry in order to fall back to a regular unmap, which intentionally
echoes the pre-existing case of recursively splitting a 1GB block down
to 4KB pages by installing a full table of 2MB blocks first.
Unfortunately, the chump who implemented that logic failed to update the
condition check for that fallback, meaning that if said race occurs at
the last level (where the loser's unmap_idx is valid) then the unmap
won't actually happen. Fix that to properly account for both the race
and recursive cases.
Fixes: 2c3d273eab ("iommu/io-pgtable-arm: Support lockless operation")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
[will: re-jig control flow to avoid duplicate cmpxchg test]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Use the for_each_of_cpu_node iterator to iterate over cpu nodes. This
has the side effect of defaulting to iterating using "cpu" node names in
preference to the deprecated (for FDT) device_type == "cpu".
Cc: Joerg Roedel <joro@8bytes.org>
Cc: iommu@lists.linux-foundation.org
Signed-off-by: Rob Herring <robh@kernel.org>
Introduces a new AP device driver. This device driver
is built on the VFIO mediated device framework. The framework
provides sysfs interfaces that facilitate passthrough
access by guests to devices installed on the linux host.
The VFIO AP device driver will serve two purposes:
1. Provide the interfaces to reserve AP devices for exclusive
use by KVM guests. This is accomplished by unbinding the
devices to be reserved for guest usage from the zcrypt
device driver and binding them to the VFIO AP device driver.
2. Implements the functions, callbacks and sysfs attribute
interfaces required to create one or more VFIO mediated
devices each of which will be used to configure the AP
matrix for a guest and serve as a file descriptor
for facilitating communication between QEMU and the
VFIO AP device driver.
When the VFIO AP device driver is initialized:
* It registers with the AP bus for control of type 10 (CEX4
and newer) AP queue devices. This limitation was imposed
due to:
1. A desire to keep the code as simple as possible;
2. Some older models are no longer supported by the kernel
and others are getting close to end of service.
3. A lack of older systems on which to test older devices.
The probe and remove callbacks will be provided to support
the binding/unbinding of AP queue devices to/from the VFIO
AP device driver.
* Creates a matrix device, /sys/devices/vfio_ap/matrix,
to serve as the parent of the mediated devices created, one
for each guest, and to hold the APQNs of the AP devices bound to
the VFIO AP device driver.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Farhan Ali <alifm@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20180925231641.4954-5-akrowiak@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
ACPI HID devices do not actually have an alias for
them in the IVRS. But dev_data->alias is still used
for indexing into the IOMMU device table for devices
being handled by the IOMMU. So for ACPI HID devices,
we simply return the corresponding devid as an alias,
as parsed from IVRS table.
Signed-off-by: Arindam Nath <arindam.nath@amd.com>
Fixes: 2bf9a0a127 ('iommu/amd: Add iommu support for ACPI HID devices')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since these are trivially handled by the .domain_{get,set}_attr
callbacks when relevant, we can streamline struct iommu_ops for
everyone.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The external interface to get/set window attributes is already
abstracted behind iommu_domain_{get,set}_attr(), so there's no real
reason for the internal interface to be different. Since we only have
one window-based driver anyway, clean up the core code by just moving
the DOMAIN_ATTR_WINDOWS handling directly into the PAMU driver.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add a new config option CONFIG_INTEL_IOMMU_DEBUGFS and do the base
enabling for Intel IOMMU debugfs.
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Co-Developed-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
To reuse the static functions and the struct declarations, move them to
corresponding header files and export the needed functions.
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Pasid table memory allocation could return failure due to memory
shortage. Limit the pasid table size to 1MiB because current 8MiB
contiguous physical memory allocation can be hard to come by. W/o
a PASID table, the device could continue to work with only shared
virtual memory impacted. So, let's go ahead with context mapping
even the memory allocation for pasid table failed.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107783
Fixes: cc580e4126 ("iommu/vt-d: Per PCI device pasid table interfaces")
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Reported-and-tested-by: Pelton Kyle D <kyle.d.pelton@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Trivial fix to spelling mistake in variable name
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In the iommu's shutdown handler we disable runtime-pm which could
result in the irq-handler running unclocked and since commit
3fc7c5c0cf ("iommu/rockchip: Handle errors returned from PM framework")
we warn about that fact.
This can cause warnings on shutdown on some Rockchip machines, so
free the irqs in the shutdown handler before we disable runtime-pm.
Reported-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Fixes: 3fc7c5c0cf ("iommu/rockchip: Handle errors returned from PM framework")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Most parts of iommu-dma already assume they are operating on a default
domain set up by iommu_dma_init_domain(), and can be converted straight
over to avoid the refcounting bottleneck. MSI page mappings may be in
an unmanaged domain with an explicit MSI-only cookie, so retain the
non-specific lookup, but that's OK since they're far from a contended
fast path either way.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
While iommu_get_domain_for_dev() is the robust way for arbitrary IOMMU
API callers to retrieve the domain pointer, for DMA ops domains it
doesn't scale well for large systems and multi-queue devices, since the
momentary refcount adjustment will lead to exclusive cacheline contention
when multiple CPUs are operating in parallel on different mappings for
the same device.
In the case of DMA ops domains, however, this refcounting is actually
unnecessary, since they already imply that the group exists and is
managed by platform code and IOMMU internals (by virtue of
iommu_group_get_for_dev()) such that a reference will already be held
for the lifetime of the device. Thus we can avoid the bottleneck by
providing a fast lookup specifically for the DMA code to retrieve the
default domain it already knows it has set up - a simple read-only
dereference plays much nicer with cache-coherency protocols.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
As an optimisation for PCI devices, there is always first attempt
been made to allocate iova from SAC address range. This will lead
to unnecessary attempts, when there are no free ranges
available. Adding fix to track recently failed iova address size and
allow further attempts, only if requested size is lesser than a failed
size. The size is updated when any replenish happens.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Implement bus specific support for the fsl-mc bus including
registering arm_smmu_ops and bus specific device add operations.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
With of_pci_map_rid available for all the busses, use the function
for configuration of devices on fsl-mc bus
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
iommu-map property is also used by devices with fsl-mc. This
patch moves the of_pci_map_rid to generic location, so that it
can be used by other busses too.
'of_pci_map_rid' is renamed here to 'of_map_rid' and there is no
functional change done in the API.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
ia64 currently explicitly assigns it to dma_ops, but that same work is
already done by intel_iommu_init a little later, so we can remove the
duplicate assignment and mark the variable static.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
The generic dma_direct_supported helper already used by intel-iommu on
x86 does a better job than the ia64 reimplementation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
A couple of late-merged changes that would be useful to get in this
merge window:
- Driver support for reset of audio complex on Meson platforms. The
audio driver went in this merge window, and these changes have been
in -next for a while (just not in our tree).
- Power management fixes for IOMMU on Rockchip platforms, getting
closer to kexec working on them, including Chromebooks.
- Another pass updating "arm,psci" -> "psci" for some properties that
have snuck in since last time it was done.
-----BEGIN PGP SIGNATURE-----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=dQaG
-----END PGP SIGNATURE-----
Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC late updates from Olof Johansson:
"A couple of late-merged changes that would be useful to get in this
merge window:
- Driver support for reset of audio complex on Meson platforms. The
audio driver went in this merge window, and these changes have been
in -next for a while (just not in our tree).
- Power management fixes for IOMMU on Rockchip platforms, getting
closer to kexec working on them, including Chromebooks.
- Another pass updating "arm,psci" -> "psci" for some properties that
have snuck in since last time it was done"
* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
iommu/rockchip: Move irq request past pm_runtime_enable
iommu/rockchip: Handle errors returned from PM framework
arm64: rockchip: Force CONFIG_PM on Rockchip systems
ARM: rockchip: Force CONFIG_PM on Rockchip systems
arm64: dts: Fix various entry-method properties to reflect documentation
reset: imx7: Fix always writing bits as 0
reset: meson: add meson audio arb driver
reset: meson: add dt-bindings for meson-axg audio arb
Including:
- PASID table handling updates for the Intel VT-d driver. It
implements a global PASID space now so that applications
usings multiple devices will just have one PASID.
- A new config option to make iommu passthroug mode the default.
- New sysfs attribute for iommu groups to export the type of the
default domain.
- A debugfs interface (for debug only) usable by IOMMU drivers
to export internals to user-space.
- R-Car Gen3 SoCs support for the ipmmu-vmsa driver
- The ARM-SMMU now aborts transactions from unknown devices and
devices not attached to any domain.
- Various cleanups and smaller fixes all over the place.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=TeYQ
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
- PASID table handling updates for the Intel VT-d driver. It implements
a global PASID space now so that applications usings multiple devices
will just have one PASID.
- A new config option to make iommu passthroug mode the default.
- New sysfs attribute for iommu groups to export the type of the
default domain.
- A debugfs interface (for debug only) usable by IOMMU drivers to
export internals to user-space.
- R-Car Gen3 SoCs support for the ipmmu-vmsa driver
- The ARM-SMMU now aborts transactions from unknown devices and devices
not attached to any domain.
- Various cleanups and smaller fixes all over the place.
* tag 'iommu-updates-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (42 commits)
iommu/omap: Fix cache flushes on L2 table entries
iommu: Remove the ->map_sg indirection
iommu/arm-smmu-v3: Abort all transactions if SMMU is enabled in kdump kernel
iommu/arm-smmu-v3: Prevent any devices access to memory without registration
iommu/ipmmu-vmsa: Don't register as BUS IOMMU if machine doesn't have IPMMU-VMSA
iommu/ipmmu-vmsa: Clarify supported platforms
iommu/ipmmu-vmsa: Fix allocation in atomic context
iommu: Add config option to set passthrough as default
iommu: Add sysfs attribyte for domain type
iommu/arm-smmu-v3: sync the OVACKFLG to PRIQ consumer register
iommu/arm-smmu: Error out only if not enough context interrupts
iommu/io-pgtable-arm-v7s: Abort allocation when table address overflows the PTE
iommu/io-pgtable-arm: Fix pgtable allocation in selftest
iommu/vt-d: Remove the obsolete per iommu pasid tables
iommu/vt-d: Apply per pci device pasid table in SVA
iommu/vt-d: Allocate and free pasid table
iommu/vt-d: Per PCI device pasid table interfaces
iommu/vt-d: Add for_each_device_domain() helper
iommu/vt-d: Move device_domain_info to header
iommu/vt-d: Apply global PASID in SVA
...
Enabling the interrupt early, before power has been applied to the
device, can result in an interrupt being delivered too early if:
- the IOMMU shares an interrupt with a VOP
- the VOP has a pending interrupt (after a kexec, for example)
In these conditions, we end-up taking the interrupt without
the IOMMU being ready to handle the interrupt (not powered on).
Moving the interrupt request past the pm_runtime_enable() call
makes sure we can at least access the IOMMU registers. Note that
this is only a partial fix, and that the VOP interrupt will still
be screaming until the VOP driver kicks in, which advocates for
a more synchronized interrupt enabling/disabling approach.
Fixes: 0f181d3cf7 ("iommu/rockchip: Add runtime PM support")
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
pm_runtime_get_if_in_use can fail: either PM has been disabled
altogether (-EINVAL), or the device hasn't been enabled yet (0).
Sadly, the Rockchip IOMMU driver tends to conflate the two things
by considering a non-zero return value as successful.
This has the consequence of hiding other bugs, so let's handle this
case throughout the driver, with a WARN_ON_ONCE so that we can try
and work out what happened.
Fixes: 0f181d3cf7 ("iommu/rockchip: Add runtime PM support")
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Here are all of the driver core and related patches for 4.19-rc1.
Nothing huge here, just a number of small cleanups and the ability to
now stop the deferred probing after init happens.
All of these have been in linux-next for a while with only a merge issue
reported. That merge issue is in fs/sysfs/group.c and Stephen has
posted the diff of what it should be to resolve this. I'll follow up
with that diff to this pull request.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW3g86Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynyXQCePaZSW8wft4b7nLN8RdZ98ATBru0Ani10lrJa
HQeQJRNbWU1AZ0ym7695
=tOaH
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here are all of the driver core and related patches for 4.19-rc1.
Nothing huge here, just a number of small cleanups and the ability to
now stop the deferred probing after init happens.
All of these have been in linux-next for a while with only a merge
issue reported"
* tag 'driver-core-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (21 commits)
base: core: Remove WARN_ON from link dependencies check
drivers/base: stop new probing during shutdown
drivers: core: Remove glue dirs from sysfs earlier
driver core: remove unnecessary function extern declare
sysfs.h: fix non-kernel-doc comment
PM / Domains: Stop deferring probe at the end of initcall
iommu: Remove IOMMU_OF_DECLARE
iommu: Stop deferring probe at end of initcalls
pinctrl: Support stopping deferred probe after initcalls
dt-bindings: pinctrl: add a 'pinctrl-use-default' property
driver core: allow stopping deferred probe after init
driver core: add a debugfs entry to show deferred devices
sysfs: Fix internal_create_group() for named group updates
base: fix order of OF initialization
linux/device.h: fix kernel-doc notation warning
Documentation: update firmware loader fallback reference
kobject: Replace strncpy with memcpy
drivers: base: cacheinfo: use OF property_read_u32 instead of get_property,read_number
kernfs: Replace strncpy with memcpy
device: Add #define dev_fmt similar to #define pr_fmt
...
The CMA memory allocator doesn't support standard gfp flags for memory
allocation, so there is no point having it as a parameter for
dma_alloc_from_contiguous() function. Replace it by a boolean no_warn
argument, which covers all the underlaying cma_alloc() function
supports.
This will help to avoid giving false feeling that this function supports
standard gfp flags and callers can pass __GFP_ZERO to get zeroed buffer,
what has already been an issue: see commit dd65a941f6 ("arm64:
dma-mapping: clear buffers allocated with FORCE_CONTIGUOUS flag").
Link: http://lkml.kernel.org/r/20180709122020eucas1p21a71b092975cb4a3b9954ffc63f699d1~-sqUFoa-h2939329393eucas1p2Y@eucas1p2.samsung.com
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Michał Nazarewicz <mina86@mina86.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use new return type vm_fault_t for fault handler. For now, this is just
documenting that the function returns a VM_FAULT value rather than an
errno. Once all instances are converted, vm_fault_t will become a
distinct type.
Ref-> commit 1c8f422059 ("mm: change return type to vm_fault_t")
In this patch all the caller of handle_mm_fault() are changed to return
vm_fault_t type.
Link: http://lkml.kernel.org/r/20180617084810.GA6730@jordon-HP-15-Notebook-PC
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: James Hogan <jhogan@kernel.org>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: David S. Miller <davem@davemloft.net>
Cc: Richard Weinberger <richard@nod.at>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Levin, Alexander (Sasha Levin)" <alexander.levin@verizon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The base address used for DMA operations on the second-level table
did incorrectly include the offset for the table entry. The offset
was then added again which lead to incorrect behavior.
Operations on the L1 table are not affected.
The calculation of the base address is changed to point to the
beginning of the L2 table.
Fixes: bfee0cf0ee ("iommu/omap: Use DMA-API for performing cache flushes")
Acked-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Ralf Goebel <ralf.goebel@imago-technologies.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
All iommu drivers use the default_iommu_map_sg implementation, and there
is no good reason to ever override it. Just expose it as iommu_map_sg
directly and remove the indirection, specially in our post-spectre world
where indirect calls are horribly expensive.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Take the new bus limit into account (when present) for IOVA allocations,
to accommodate those SoCs which integrate off-the-shelf IP blocks with
narrower interconnects such that the link between a device output and an
IOMMU input can truncate DMA addresses to even fewer bits than the
native size of either block's interface would imply.
Eventually it might make sense for the DMA core to apply this constraint
up-front in dma_set_mask() and friends, but for now this seems like the
least risky approach.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
If we find that the SMMU is enabled during probe, we reset it by
re-initialising its registers and either enabling translation or placing
it into bypass based on the disable_bypass commandline option.
In the case of a kdump kernel, the SMMU won't have been shutdown cleanly
by the previous kernel and there may be concurrent DMA through the SMMU.
Rather than reset the SMMU to bypass, which would likely lead to rampant
data corruption, we can instead configure the SMMU to abort all incoming
transactions when we find that it is enabled from within a kdump kernel.
Reported-by: Sameer Goel <sgoel@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Stream bypass is a potential security hole since a malicious device can be
hotplugged in without matching any drivers, yet be granted the ability to
access all of physical memory.
Now that we attach devices to domains by default, we can toggle the
disable_bypass default to "on", preventing DMA from unknown devices.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
This fixes kernel crashing on NVIDIA Tegra if kernel is compiled in
a multiplatform configuration and IPMMU-VMSA driver is enabled.
Cc: <stable@vger.kernel.org> # v3.20+
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Renesas IPMMU-VMSA driver supports not just R-Car H2 and M2 SoCs,
but also other R-Car Gen2 and R-Car Gen3 SoCs.
Drop a superfluous "Renesas" while at it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When attaching a device to an IOMMU group with
CONFIG_DEBUG_ATOMIC_SLEEP=y:
BUG: sleeping function called from invalid context at mm/slab.h:421
in_atomic(): 1, irqs_disabled(): 128, pid: 61, name: kworker/1:1
...
Call trace:
...
arm_lpae_alloc_pgtable+0x114/0x184
arm_64_lpae_alloc_pgtable_s1+0x2c/0x128
arm_32_lpae_alloc_pgtable_s1+0x40/0x6c
alloc_io_pgtable_ops+0x60/0x88
ipmmu_attach_device+0x140/0x334
ipmmu_attach_device() takes a spinlock, while arm_lpae_alloc_pgtable()
allocates memory using GFP_KERNEL. Originally, the ipmmu-vmsa driver
had its own custom page table allocation implementation using
GFP_ATOMIC, hence the spinlock was fine.
Fix this by replacing the spinlock by a mutex, like the arm-smmu driver
does.
Fixes: f20ed39f53 ("iommu/ipmmu-vmsa: Use the ARM LPAE page table allocator")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This allows the default behavior to be controlled by a kernel config
option instead of changing the commandline for the kernel to include
"iommu.passthrough=on" or "iommu=pt" on machines where this is desired.
Likewise, for machines where this config option is enabled, it can be
disabled at boot time with "iommu.passthrough=off" or "iommu=nopt".
Also corrected iommu=pt documentation for IA-64, since it has no code that
parses iommu= at all.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
While we could print it at setup time, this is an easier way to match
each device to their default IOMMU allocation type.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When PRI queue occurs overflow, driver should update the OVACKFLG to
the PRIQ consumer register, otherwise subsequent PRI requests will not
be processed.
Cc: Will Deacon <will.deacon@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Miao Zhong <zhongmiao@hisilicon.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Currently we check if the number of context banks is not equal to
num_context_interrupts. However, there are booloaders such as, one
on sdm845 that reserves few context banks and thus kernel views
less than the total available context banks.
So, although the hardware definition in device tree would mention
the correct number of context interrupts, this number can be
greater than the number of context banks visible to smmu in kernel.
We should therefore error out only when the number of context banks
is greater than the available number of context interrupts.
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Suggested-by: Tomasz Figa <tfiga@chromium.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
[will: drop useless printk]
Signed-off-by: Will Deacon <will.deacon@arm.com>
When run on a 64-bit system in selftest, the v7s driver may obtain page
table with physical addresses larger than 32-bit. Level-2 tables are 1KB
and are are allocated with slab, which doesn't accept the GFP_DMA32
flag. Currently map() truncates the address written in the PTE, causing
iova_to_phys() or unmap() to access invalid memory. Kasan reports it as
a use-after-free. To avoid any nasty surprise, test if the physical
address fits in a PTE before returning a new table. 32-bit systems,
which are the main users of this page table format, shouldn't see any
difference.
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Commit 4b123757ee ("iommu/io-pgtable-arm: Make allocations
NUMA-aware") added a NUMA hint to page table allocation, but the pgtable
selftest doesn't provide an SMMU device parameter. Since dev_to_node
doesn't accept a NULL argument, add a special case for selftest.
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The obsolete per iommu pasid tables are no longer used. Hence,
clean up them.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This patch applies the per pci device pasid table in the Shared
Virtual Address (SVA) implementation.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This patch allocates a PASID table for a PCI device at the time
when the dmar dev_info is attached to dev->archdata.iommu, and
free it in the opposite case.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This patch adds the interfaces for per PCI device pasid
table management. Currently we allocate one pasid table
for all PCI devices under the scope of an IOMMU. It's
insecure in some cases where multiple devices under one
single IOMMU unit support PASID features. With per PCI
device pasid table, we can achieve finer protection and
isolation granularity.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This adds a helper named for_each_device_domain() to iterate
over the elements in device_domain_list and invoke a callback
against each element. This allows to search the device_domain
list in other source files.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This allows the per device iommu data and some helpers to be
used in other files.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This patch applies the global pasid name space in the shared
virtual address (SVA) implementation.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
idr_for_each_entry() is used to iteratte over idr elements
of a given type. It isn't suitable for the globle pasid idr
since the pasid idr consumer could specify different types
of pointers to bind with a pasid.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This adds the system wide PASID name space for the PASID
allocation. Currently we are using per IOMMU PASID name
spaces which are not suitable for some use cases. For an
example, one application (associated with a PASID) might
talk to two physical devices simultaneously while the two
devices could reside behind two different IOMMU units.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The WARN_ON() was introduced in commit 272e4f99e9 ("iommu/amd: WARN
when __[attach|detach]_device are called with irqs enabled") to ensure
that the domain->lock is taken in proper irqs disabled context. This
is required, because the domain->lock is taken as well in irq
context.
The proper context check by the WARN_ON() is redundant, because it is
already covered by LOCKDEP. When working with locks and changing
context, a run with LOCKDEP is required anyway and would detect the
wrong lock context.
Furthermore all callers for those functions are within the same file
and all callers acquire another lock which already disables interrupts.
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The TTSEL bit of IMUCTRn register of R-Car Gen3 needs to be set
unused MMU context number even if uTLBs are disabled
(The MMUEN bit of IMUCTRn register = 0).
Since initial values of IMUCTRn.TTSEL on all IPMMU-domains are 0,
this patch adds a new feature "reserved_context" to reserve IPMMU
context number 0 as the unused MMU context.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This reverts commit ab96746aaa.
The commit ab96746aaa ("iommu/vt-d: Clean up pasid quirk for
pre-production devices") triggers ECS mode on some platforms
which have broken ECS support. As the result, graphic device
will be inoperable on boot.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107017
Cc: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Now that we use the driver core to stop deferred probe for missing
drivers, IOMMU_OF_DECLARE can be removed.
This is slightly less optimal than having a list of built-in drivers in
that we'll now defer probe twice before giving up. This shouldn't have a
significant impact on boot times as past discussions about deferred
probe have given no evidence of deferred probe having a substantial
impact.
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: iommu@lists.linux-foundation.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: devicetree@vger.kernel.org
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The IOMMU subsystem has its own mechanism to not defer probe if driver
support is missing. Now that the driver core supports stopping deferring
probe if drivers aren't built-in (and probed), use the driver core
support so the IOMMU specific support can be removed.
Acked-by: Joerg Roedel <jroedel@suse.de>
Cc: iommu@lists.linux-foundation.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The AMD IOMMU XT mode enables interrupt remapping with 32-bit destination
APIC ID, which is required for x2APIC. The feature is available when
the XTSup bit is set in the IOMMU Extended Feature register
and/or the IVHD Type 10h IOMMU Feature Reporting field.
For more information, please see section "IOMMU x2APIC Support" of
the AMD I/O Virtualization Technology (IOMMU) Specification.
Cc: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently, the driver only supports lower 32-bit of IOMMU Control register.
However, newer AMD IOMMU specification has extended this register
to 64-bit. Therefore, replace the accessing API with the 64-bit version.
Cc: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Support the r8a77970 (R-Car V3M) and r8a77995 (R-Car D3) IPMMUs by sharing
feature flags with r8a7795 (R-Car H3) and r8a7796 (R-Car M3-W). Also update
IOMMU_OF_DECLARE to hook up the compat strings.
Based on work for the r8a7796 by Magnus Damm
[rebased on v4.17]
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Support the r8a7796 IPMMU by sharing feature flags between
r8a7795 and r8a7796. Also update IOMMU_OF_DECLARE to hook
up the updated compat string.
[rebased on v4.17]
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Bump up the maximum numbers of micro-TLBS to 48.
Each IPMMU device instance get micro-TLB assignment via
the "iommus" property in DT. Older SoCs tend to use a
maximum number of 32 micro-TLBs per IPMMU instance however
newer SoCs such as r8a7796 make use of up to 48 micro-TLBs.
At this point no SoC specific handling is done to validate
the maximum number of micro-TLBs, and because of that the
DT information is assumed to be within correct range for
each particular SoC.
If needed in the future SoC specific feature flags can be
added to handle the maximum number of micro-TLBs without
requiring DT changes, however at this point this does not
seem necessary.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Implement a skeleton framework for debugfs support in the AMD
IOMMU. Add an AMD-specific Kconfig boolean that depends upon
general enablement of DebugFS in the IOMMU.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Provide base enablement for using debugfs to expose internal data of an
IOMMU driver. When called, create the /sys/kernel/debug/iommu directory.
Emit a strong warning at boot time to indicate that this feature is
enabled.
This function is called from iommu_init, and creates the initial DebugFS
directory. Drivers may then call iommu_debugfs_new_driver_dir() to
instantiate a device-specific directory to expose internal data.
It will return a pointer to the new dentry structure created in
/sys/kernel/debug/iommu, or NULL in the event of a failure.
Since the IOMMU driver can not be removed from the running system, there
is no need for an "off" function.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
