ARCH_SAVE_PAGE_KEYS has been introduced in order to be able to save
and restore s390 specific storage keys into a hibernation image.
With hibernation support removed from s390 there is no point in
keeping the callbacks.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Commit 3f8fd02b1b ("mm/vmalloc: Sync unmappings in
__purge_vmap_area_lazy()") introduced a call to vmalloc_sync_all() in
the vunmap() code-path. While this change was necessary to maintain
correctness on x86-32-pae kernels, it also adds additional cycles for
architectures that don't need it.
Specifically on x86-64 with CONFIG_VMAP_STACK=y some people reported
severe performance regressions in micro-benchmarks because it now also
calls the x86-64 implementation of vmalloc_sync_all() on vunmap(). But
the vmalloc_sync_all() implementation on x86-64 is only needed for newly
created mappings.
To avoid the unnecessary work on x86-64 and to gain the performance
back, split up vmalloc_sync_all() into two functions:
* vmalloc_sync_mappings(), and
* vmalloc_sync_unmappings()
Most call-sites to vmalloc_sync_all() only care about new mappings being
synchronized. The only exception is the new call-site added in the
above mentioned commit.
Shile Zhang directed us to a report of an 80% regression in reaim
throughput.
Fixes: 3f8fd02b1b ("mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy()")
Reported-by: kernel test robot <oliver.sang@intel.com>
Reported-by: Shile Zhang <shile.zhang@linux.alibaba.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Borislav Petkov <bp@suse.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [GHES]
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20191009124418.8286-1-joro@8bytes.org
Link: https://lists.01.org/hyperkitty/list/lkp@lists.01.org/thread/4D3JPPHBNOSPFK2KEPC6KGKS6J25AIDB/
Link: http://lkml.kernel.org/r/20191113095530.228959-1-shile.zhang@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, rcu_barrier() ignores offline CPUs, However, it is possible
for an offline no-CBs CPU to have callbacks queued, and rcu_barrier()
must wait for those callbacks. This commit therefore makes rcu_barrier()
directly invoke the rcu_barrier_func() with interrupts disabled for such
CPUs. This requires passing the CPU number into this function so that
it can entrain the rcu_barrier() callback onto the correct CPU's callback
list, given that the code must instead execute on the current CPU.
While in the area, this commit fixes a bug where the first CPU's callback
might have been invoked before rcu_segcblist_entrain() returned, which
would also result in an early wakeup.
Fixes: 5d6742b377 ("rcu/nocb: Use rcu_segcblist for no-CBs CPUs")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
[ paulmck: Apply optimization feedback from Boqun Feng. ]
Cc: <stable@vger.kernel.org> # 5.5.x
The rcu_state structure's gp_seq field is only to be modified by the RCU
grace-period kthread, which is single-threaded. This commit therefore
enlists KCSAN's help in enforcing this restriction.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The handling of notify->work did not properly maintain notify->kref in two
cases:
1) where the work was already scheduled, another irq_set_affinity_locked()
would get the ref and (no-op-ly) schedule the work. Thus when
irq_affinity_notify() ran, it would drop the original ref but not the
additional one.
2) when cancelling the (old) work in irq_set_affinity_notifier(), if there
was outstanding work a ref had been got for it but was never put.
Fix both by checking the return values of the work handling functions
(schedule_work() for (1) and cancel_work_sync() for (2)) and put the
extra ref if the return value indicates preexisting work.
Fixes: cd7eab44e9 ("genirq: Add IRQ affinity notifiers")
Fixes: 59c39840f5 ("genirq: Prevent use-after-free and work list corruption")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ben Hutchings <ben@decadent.org.uk>
Link: https://lkml.kernel.org/r/24f5983f-2ab5-e83a-44ee-a45b5f9300f5@solarflare.com
Continue what commit:
d820ac4c2f ("locking: rename trace_softirq_[enter|exit] => lockdep_softirq_[enter|exit]")
started, rename these to avoid confusing them with tracepoints.
git grep -l "trace_\(soft\|hard\)\(irq_context\|irqs_enabled\)" | while read file;
do
sed -ie 's/trace_\(soft\|hard\)\(irq_context\|irqs_enabled\)/lockdep_\1\2/g' $file;
done
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20200320115859.178626842@infradead.org
Continue what commit:
d820ac4c2f ("locking: rename trace_softirq_[enter|exit] => lockdep_softirq_[enter|exit]")
started, rename these to avoid confusing them with tracepoints.
git grep -l "trace_softirqs_\(on\|off\)" | while read file;
do
sed -ie 's/trace_softirqs_\(on\|off\)/lockdep_softirqs_\1/g' $file;
done
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20200320115859.119434738@infradead.org
Continue what commit:
d820ac4c2f ("locking: rename trace_softirq_[enter|exit] => lockdep_softirq_[enter|exit]")
started, rename these to avoid confusing them with tracepoints.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20200320115859.060481361@infradead.org
Splitting run_posix_cpu_timers() into two parts is work in progress which
is stuck on other entry code related problems. The heavy lifting which
involves locking of sighand lock will be moved into task context so the
necessary execution time is burdened on the task and not on interrupt
context.
Until this work completes lockdep with the spinlock nesting rules enabled
would emit warnings for this known context.
Prevent it by setting "->irq_config = 1" for the invocation of
run_posix_cpu_timers() so lockdep does not complain when sighand lock is
acquried. This will be removed once the split is completed.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200321113242.751182723@linutronix.de
Mark irq_work items with IRQ_WORK_HARD_IRQ which should be invoked in
hardirq context even on PREEMPT_RT. IRQ_WORK without this flag will be
invoked in softirq context on PREEMPT_RT.
Set ->irq_config to 1 for the IRQ_WORK items which are invoked in softirq
context so lockdep knows that these can safely acquire a spinlock_t.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200321113242.643576700@linutronix.de
Set current->irq_config = 1 for hrtimers which are not marked to expire in
hard interrupt context during hrtimer_init(). These timers will expire in
softirq context on PREEMPT_RT.
Setting this allows lockdep to differentiate these timers. If a timer is
marked to expire in hard interrupt context then the timer callback is not
supposed to acquire a regular spinlock instead of a raw_spinlock in the
expiry callback.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200321113242.534508206@linutronix.de
Extend lockdep to validate lock wait-type context.
The current wait-types are:
LD_WAIT_FREE, /* wait free, rcu etc.. */
LD_WAIT_SPIN, /* spin loops, raw_spinlock_t etc.. */
LD_WAIT_CONFIG, /* CONFIG_PREEMPT_LOCK, spinlock_t etc.. */
LD_WAIT_SLEEP, /* sleeping locks, mutex_t etc.. */
Where lockdep validates that the current lock (the one being acquired)
fits in the current wait-context (as generated by the held stack).
This ensures that there is no attempt to acquire mutexes while holding
spinlocks, to acquire spinlocks while holding raw_spinlocks and so on. In
other words, its a more fancy might_sleep().
Obviously RCU made the entire ordeal more complex than a simple single
value test because RCU can be acquired in (pretty much) any context and
while it presents a context to nested locks it is not the same as it
got acquired in.
Therefore its necessary to split the wait_type into two values, one
representing the acquire (outer) and one representing the nested context
(inner). For most 'normal' locks these two are the same.
[ To make static initialization easier we have the rule that:
.outer == INV means .outer == .inner; because INV == 0. ]
It further means that its required to find the minimal .inner of the held
stack to compare against the outer of the new lock; because while 'normal'
RCU presents a CONFIG type to nested locks, if it is taken while already
holding a SPIN type it obviously doesn't relax the rules.
Below is an example output generated by the trivial test code:
raw_spin_lock(&foo);
spin_lock(&bar);
spin_unlock(&bar);
raw_spin_unlock(&foo);
[ BUG: Invalid wait context ]
-----------------------------
swapper/0/1 is trying to lock:
ffffc90000013f20 (&bar){....}-{3:3}, at: kernel_init+0xdb/0x187
other info that might help us debug this:
1 lock held by swapper/0/1:
#0: ffffc90000013ee0 (&foo){+.+.}-{2:2}, at: kernel_init+0xd1/0x187
The way to read it is to look at the new -{n,m} part in the lock
description; -{3:3} for the attempted lock, and try and match that up to
the held locks, which in this case is the one: -{2,2}.
This tells that the acquiring lock requires a more relaxed environment than
presented by the lock stack.
Currently only the normal locks and RCU are converted, the rest of the
lockdep users defaults to .inner = INV which is ignored. More conversions
can be done when desired.
The check for spinlock_t nesting is not enabled by default. It's a separate
config option for now as there are known problems which are currently
addressed. The config option allows to identify these problems and to
verify that the solutions found are indeed solving them.
The config switch will be removed and the checks will permanently enabled
once the vast majority of issues has been addressed.
[ bigeasy: Move LD_WAIT_FREE,… out of CONFIG_LOCKDEP to avoid compile
failure with CONFIG_DEBUG_SPINLOCK + !CONFIG_LOCKDEP]
[ tglx: Add the config option ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200321113242.427089655@linutronix.de
completion uses a wait_queue_head_t to enqueue waiters.
wait_queue_head_t contains a spinlock_t to protect the list of waiters
which excludes it from being used in truly atomic context on a PREEMPT_RT
enabled kernel.
The spinlock in the wait queue head cannot be replaced by a raw_spinlock
because:
- wait queues can have custom wakeup callbacks, which acquire other
spinlock_t locks and have potentially long execution times
- wake_up() walks an unbounded number of list entries during the wake up
and may wake an unbounded number of waiters.
For simplicity and performance reasons complete() should be usable on
PREEMPT_RT enabled kernels.
completions do not use custom wakeup callbacks and are usually single
waiter, except for a few corner cases.
Replace the wait queue in the completion with a simple wait queue (swait),
which uses a raw_spinlock_t for protecting the waiter list and therefore is
safe to use inside truly atomic regions on PREEMPT_RT.
There is no semantical or functional change:
- completions use the exclusive wait mode which is what swait provides
- complete() wakes one exclusive waiter
- complete_all() wakes all waiters while holding the lock which protects
the wait queue against newly incoming waiters. The conversion to swait
preserves this behaviour.
complete_all() might cause unbound latencies with a large number of waiters
being woken at once, but most complete_all() usage sites are either in
testing or initialization code or have only a really small number of
concurrent waiters which for now does not cause a latency problem. Keep it
simple for now.
The fixup of the warning check in the USB gadget driver is just a straight
forward conversion of the lockless waiter check from one waitqueue type to
the other.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200321113242.317954042@linutronix.de
As a preparation to use simple wait queues for completions:
- Provide swake_up_all_locked() to support complete_all()
- Make __prepare_to_swait() public available
This is done to enable the usage of complete() within truly atomic contexts
on a PREEMPT_RT enabled kernel.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200321113242.228481202@linutronix.de
seqlock consists of a sequence counter and a spinlock_t which is used to
serialize the writers. spinlock_t is substituted by a "sleeping" spinlock
on PREEMPT_RT enabled kernels which breaks the usage in the timekeeping
code as the writers are executed in hard interrupt and therefore
non-preemptible context even on PREEMPT_RT.
The spinlock in seqlock cannot be unconditionally replaced by a
raw_spinlock_t as many seqlock users have nesting spinlock sections or
other code which is not suitable to run in truly atomic context on RT.
Instead of providing a raw_seqlock API for a single use case, open code the
seqlock for the jiffies use case and implement it with a raw_spinlock_t and
a sequence counter.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200321113242.120587764@linutronix.de
Extend rcuwait_wait_event() with a state variable so that it is not
restricted to UNINTERRUPTIBLE waits.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200321113241.824030968@linutronix.de
Trying to initialize a structure with "= {};" will not always clean out
all padding locations in a structure. So be explicit and call memset to
initialize everything for a number of bpf information structures that
are then copied from userspace, sometimes from smaller memory locations
than the size of the structure.
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200320162258.GA794295@kroah.com
For the bpf syscall, we are relying on the compiler to properly zero out
the bpf_attr union that we copy userspace data into. Unfortunately that
doesn't always work properly, padding and other oddities might not be
correctly zeroed, and in some tests odd things have been found when the
stack is pre-initialized to other values.
Fix this by explicitly memsetting the structure to 0 before using it.
Reported-by: Maciej Żenczykowski <maze@google.com>
Reported-by: John Stultz <john.stultz@linaro.org>
Reported-by: Alexander Potapenko <glider@google.com>
Reported-by: Alistair Delva <adelva@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://android-review.googlesource.com/c/kernel/common/+/1235490
Link: https://lore.kernel.org/bpf/20200320094813.GA421650@kroah.com
nmi_enter() does lockdep_off() and hence lockdep ignores everything.
And NMI context makes it impossible to do full IN-NMI tracking like we
do IN-HARDIRQ, that could result in graph_lock recursion.
However, since look_up_lock_class() is lockless, we can find the class
of a lock that has prior use and detect IN-NMI after USED, just not
USED after IN-NMI.
NOTE: By shifting the lockdep_off() recursion count to bit-16, we can
easily differentiate between actual recursion and off.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Link: https://lkml.kernel.org/r/20200221134215.090538203@infradead.org
There were two patterns for lockdep_recursion:
Pattern-A:
if (current->lockdep_recursion)
return
current->lockdep_recursion = 1;
/* do stuff */
current->lockdep_recursion = 0;
Pattern-B:
current->lockdep_recursion++;
/* do stuff */
current->lockdep_recursion--;
But a third pattern has emerged:
Pattern-C:
current->lockdep_recursion = 1;
/* do stuff */
current->lockdep_recursion = 0;
And while this isn't broken per-se, it is highly dangerous because it
doesn't nest properly.
Get rid of all Pattern-C instances and shore up Pattern-A with a
warning.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200313093325.GW12561@hirez.programming.kicks-ass.net
Qian Cai reported a bug when PROVE_RCU_LIST=y, and read on /proc/lockdep
triggered a warning:
[ ] DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled)
...
[ ] Call Trace:
[ ] lock_is_held_type+0x5d/0x150
[ ] ? rcu_lockdep_current_cpu_online+0x64/0x80
[ ] rcu_read_lock_any_held+0xac/0x100
[ ] ? rcu_read_lock_held+0xc0/0xc0
[ ] ? __slab_free+0x421/0x540
[ ] ? kasan_kmalloc+0x9/0x10
[ ] ? __kmalloc_node+0x1d7/0x320
[ ] ? kvmalloc_node+0x6f/0x80
[ ] __bfs+0x28a/0x3c0
[ ] ? class_equal+0x30/0x30
[ ] lockdep_count_forward_deps+0x11a/0x1a0
The warning got triggered because lockdep_count_forward_deps() call
__bfs() without current->lockdep_recursion being set, as a result
a lockdep internal function (__bfs()) is checked by lockdep, which is
unexpected, and the inconsistency between the irq-off state and the
state traced by lockdep caused the warning.
Apart from this warning, lockdep internal functions like __bfs() should
always be protected by current->lockdep_recursion to avoid potential
deadlocks and data inconsistency, therefore add the
current->lockdep_recursion on-and-off section to protect __bfs() in both
lockdep_count_forward_deps() and lockdep_count_backward_deps()
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200312151258.128036-1-boqun.feng@gmail.com
This NULL check is reversed so it leads to a Smatch warning and
presumably a NULL dereference.
kernel/events/core.c:1598 perf_event_groups_less()
error: we previously assumed 'right->cgrp->css.cgroup' could be null
(see line 1590)
Fixes: 95ed6c707f ("perf/cgroup: Order events in RB tree by cgroup id")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200312105637.GA8960@mwanda
Kan and Andi reported that we fail to kill rotation when the flexible
events go empty, but the context does not. XXX moar
Fixes: fd7d55172d ("perf/cgroups: Don't rotate events for cgroups unnecessarily")
Reported-by: Andi Kleen <ak@linux.intel.com>
Reported-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200305123851.GX2596@hirez.programming.kicks-ass.net
In update_sg_wakeup_stats(), the comment says:
Computing avg_load makes sense only when group is fully
busy or overloaded.
But, the code below this comment does not check like this.
From reading the code about avg_load in other functions, I
confirm that avg_load should be calculated in fully busy or
overloaded case. The comment is correct and the checking
condition is wrong. So, change that condition.
Fixes: 57abff067a ("sched/fair: Rework find_idlest_group()")
Signed-off-by: Tao Zhou <ouwen210@hotmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lkml.kernel.org/r/Message-ID:
If we failed to find a fitting CPU, in cpupri_find(), we only fallback
to the level we found a hit at.
But Steve suggested to fallback to a second full scan instead as this
could be a better effort.
https://lore.kernel.org/lkml/20200304135404.146c56eb@gandalf.local.home/
We trigger the 2nd search unconditionally since the argument about
triggering a full search is that the recorded fall back level might have
become empty by then. Which means storing any data about what happened
would be meaningless and stale.
I had a humble try at timing it and it seemed okay for the small 6 CPUs
system I was running on
https://lore.kernel.org/lkml/20200305124324.42x6ehjxbnjkklnh@e107158-lin.cambridge.arm.com/
On large system this second full scan could be expensive. But there are
no users outside capacity awareness for this fitness function at the
moment. Heterogeneous systems tend to be small with 8cores in total.
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lkml.kernel.org/r/20200310142219.syxzn5ljpdxqtbgx@e107158-lin.cambridge.arm.com
when we create a kthread with ktrhead_create_on_cpu(),the child thread
entry is ktread.c:ktrhead() which will be preempted by the parent after
call complete(done) while schedule() is not called yet,then the parent
will call wait_task_inactive(child) but the child is still on the runqueue,
so the parent will schedule_hrtimeout() for 1 jiffy,it will waste a lot of
time,especially on startup.
parent child
ktrhead_create_on_cpu()
wait_fo_completion(&done) -----> ktread.c:ktrhead()
|----- complete(done);--wakeup and preempted by parent
kthread_bind() <------------| |-> schedule();--dequeue here
wait_task_inactive(child) |
schedule_hrtimeout(1 jiffy) -|
So we hope the child just wakeup parent but not preempted by parent, and the
child is going to call schedule() soon,then the parent will not call
schedule_hrtimeout(1 jiffy) as the child is already dequeue.
The same issue for ktrhead_park()&&kthread_parkme().
This patch can save 120ms on rk312x startup with CONFIG_HZ=300.
Signed-off-by: Liang Chen <cl@rock-chips.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lkml.kernel.org/r/20200306070133.18335-2-cl@rock-chips.com
During load_balancing, a group with spare capacity will try to pull some
utilizations from an overloaded group. In such case, the load balance
looks for the runqueue with the highest utilization. Nevertheless, it
should also ensure that there are some pending tasks to pull otherwise
the load balance will fail to pull a task and the spread of the load will
be delayed.
This situation is quite transient but it's possible to highlight the
effect with a short run of sysbench test so the time to spread task impacts
the global result significantly.
Below are the average results for 15 iterations on an arm64 octo core:
sysbench --test=cpu --num-threads=8 --max-requests=1000 run
tip/sched/core +patchset
total time: 172ms 158ms
per-request statistics:
avg: 1.337ms 1.244ms
max: 21.191ms 10.753ms
The average max doesn't fully reflect the wide spread of the value which
ranges from 1.350ms to more than 41ms for the tip/sched/core and from
1.350ms to 21ms with the patch.
Other factors like waiting for an idle load balance or cache hotness
can delay the spreading of the tasks which explains why we can still
have up to 21ms with the patch.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200312165429.990-1-vincent.guittot@linaro.org
During our testing, we found a case that shares no longer
working correctly, the cgroup topology is like:
/sys/fs/cgroup/cpu/A (shares=102400)
/sys/fs/cgroup/cpu/A/B (shares=2)
/sys/fs/cgroup/cpu/A/B/C (shares=1024)
/sys/fs/cgroup/cpu/D (shares=1024)
/sys/fs/cgroup/cpu/D/E (shares=1024)
/sys/fs/cgroup/cpu/D/E/F (shares=1024)
The same benchmark is running in group C & F, no other tasks are
running, the benchmark is capable to consumed all the CPUs.
We suppose the group C will win more CPU resources since it could
enjoy all the shares of group A, but it's F who wins much more.
The reason is because we have group B with shares as 2, since
A->cfs_rq.load.weight == B->se.load.weight == B->shares/nr_cpus,
so A->cfs_rq.load.weight become very small.
And in calc_group_shares() we calculate shares as:
load = max(scale_load_down(cfs_rq->load.weight), cfs_rq->avg.load_avg);
shares = (tg_shares * load) / tg_weight;
Since the 'cfs_rq->load.weight' is too small, the load become 0
after scale down, although 'tg_shares' is 102400, shares of the se
which stand for group A on root cfs_rq become 2.
While the se of D on root cfs_rq is far more bigger than 2, so it
wins the battle.
Thus when scale_load_down() scale real weight down to 0, it's no
longer telling the real story, the caller will have the wrong
information and the calculation will be buggy.
This patch add check in scale_load_down(), so the real weight will
be >= MIN_SHARES after scale, after applied the group C wins as
expected.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/38e8e212-59a1-64b2-b247-b6d0b52d8dc1@linux.alibaba.com
The task->flags is a 32-bits flag, in which 31 bits have already been
consumed. So it is hardly to introduce other new per process flag.
Currently there're still enough spaces in the bit-field section of
task_struct, so we can define the memstall state as a single bit in
task_struct instead.
This patch also removes an out-of-date comment pointed by Matthew.
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lkml.kernel.org/r/1584408485-1921-1-git-send-email-laoar.shao@gmail.com
When switching tasks running on a CPU, the psi state of a cgroup
containing both of these tasks does not change. Right now, we don't
exploit that, and can perform many unnecessary state changes in nested
hierarchies, especially when most activity comes from one leaf cgroup.
This patch implements an optimization where we only update cgroups
whose state actually changes during a task switch. These are all
cgroups that contain one task but not the other, up to the first
shared ancestor. When both tasks are in the same group, we don't need
to update anything at all.
We can identify the first shared ancestor by walking the groups of the
incoming task until we see TSK_ONCPU set on the local CPU; that's the
first group that also contains the outgoing task.
The new psi_task_switch() is similar to psi_task_change(). To allow
code reuse, move the task flag maintenance code into a new function
and the poll/avg worker wakeups into the shared psi_group_change().
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200316191333.115523-3-hannes@cmpxchg.org
For simplicity, cpu pressure is defined as having more than one
runnable task on a given CPU. This works on the system-level, but it
has limitations in a cgrouped reality: When cpu.max is in use, it
doesn't capture the time in which a task is not executing on the CPU
due to throttling. Likewise, it doesn't capture the time in which a
competing cgroup is occupying the CPU - meaning it only reflects
cgroup-internal competitive pressure, not outside pressure.
Enable tracking of currently executing tasks, and then change the
definition of cpu pressure in a cgroup from
NR_RUNNING > 1
to
NR_RUNNING > ON_CPU
which will capture the effects of cpu.max as well as competition from
outside the cgroup.
After this patch, a cgroup running `stress -c 1` with a cpu.max
setting of 5000 10000 shows ~50% continuous CPU pressure.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200316191333.115523-2-hannes@cmpxchg.org
Currently, when updating the affinity of tasks via either cpusets.cpus,
or, sched_setaffinity(); tasks not currently running within the newly
specified mask will be arbitrarily assigned to the first CPU within the
mask.
This (particularly in the case that we are restricting masks) can
result in many tasks being assigned to the first CPUs of their new
masks.
This:
1) Can induce scheduling delays while the load-balancer has a chance to
spread them between their new CPUs.
2) Can antogonize a poor load-balancer behavior where it has a
difficult time recognizing that a cross-socket imbalance has been
forced by an affinity mask.
This change adds a new cpumask interface to allow iterated calls to
distribute within the intersection of the provided masks.
The cases that this mainly affects are:
- modifying cpuset.cpus
- when tasks join a cpuset
- when modifying a task's affinity via sched_setaffinity(2)
Signed-off-by: Paul Turner <pjt@google.com>
Signed-off-by: Josh Don <joshdon@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Qais Yousef <qais.yousef@arm.com>
Tested-by: Qais Yousef <qais.yousef@arm.com>
Link: https://lkml.kernel.org/r/20200311010113.136465-1-joshdon@google.com
When a cfs rq is throttled, the latter and its child are removed from the
leaf list but their nr_running is not changed which includes staying higher
than 1. When a task is enqueued in this throttled branch, the cfs rqs must
be added back in order to ensure correct ordering in the list but this can
only happens if nr_running == 1.
When cfs bandwidth is used, we call unconditionnaly list_add_leaf_cfs_rq()
when enqueuing an entity to make sure that the complete branch will be
added.
Similarly unthrottle_cfs_rq() can stop adding cfs in the list when a parent
is throttled. Iterate the remaining entity to ensure that the complete
branch will be added in the list.
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: stable@vger.kernel.org
Cc: stable@vger.kernel.org #v5.1+
Link: https://lkml.kernel.org/r/20200306135257.25044-1-vincent.guittot@linaro.org
As it is fine to perform several "peeks" of event data in the ring buffer
via the iterator before moving it forward, do not re-read the event, just
return what was read before. Otherwise, it can cause inconsistent results,
especially when testing multiple CPU buffers to interleave them.
Link: http://lkml.kernel.org/r/20200317213416.592032170@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As the iterator will be reading a live buffer, and if the event being read
is on a page that a writer crosses, it will fail and try again, the
condition in rb_iter_peek() that only allows a retry to happen three times
is no longer valid. Allow rb_iter_peek() to retry more than three times
without killing the ring buffer, but only if rb_iter_head_event() had failed
at least once.
Link: http://lkml.kernel.org/r/20200317213416.452888193@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Have the ring_buffer_iter structure have a place to store an event, such
that it can not be overwritten by a writer, and load it in such a way via
rb_iter_head_event() that it will return NULL and reset the iter to the
start of the current page if a writer updated the page.
Link: http://lkml.kernel.org/r/20200317213416.306959216@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Have the ring_buffer_iter structure contain a page_stamp, such that it can
be used to see if the writer entered the page the iterator is on. When going
to a new page, the iterator will record the time stamp of that page. When
reading events, it can copy the event to an internal buffer on the iterator
(to be implemented later), then check the page's time stamp with its own to
see if the writer entered the page. If so, it will need to try to read the
event again.
Link: http://lkml.kernel.org/r/20200317213416.163549674@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When the ring buffer was first created, the iterator followed the normal
producer/consumer operations where it had both a peek() operation, that just
returned the event at the current location, and a read(), that would return
the event at the current location and also increment the iterator such that
the next peek() or read() will return the next event.
The only use of the ring_buffer_read() is currently to move the iterator to
the next location and nothing now actually reads the event it returns.
Rename this function to its actual use case to ring_buffer_iter_advance(),
which also adds the "iter" part to the name, which is more meaningful. As
the timestamp returned by ring_buffer_read() was never used, there's no
reason that this new version should bother having returning it. It will also
become a void function.
Link: http://lkml.kernel.org/r/20200317213416.018928618@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
It was complained about that when the trace file is read, that the tracing
is disabled, as the iterator expects writing to the buffer it reads is not
updated. Several steps are needed to make the iterator handle a writer,
by testing if things have changed as it reads.
This step is to make ring_buffer_empty() expect the buffer to be changing.
Note if the current location of the iterator is overwritten, then it will
return false as new data is being added. Note, that this means that data
will be skipped.
Link: http://lkml.kernel.org/r/20200317213415.870741809@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
In order to have the iterator read the buffer even when it's still updating,
it requires that the ring buffer iterator saves each event in a separate
location outside the ring buffer such that its use is immutable.
There's one use case that saves off the event returned from the ring buffer
interator and calls it again to look at the next event, before going back to
use the first event. As the ring buffer iterator will only have a single
copy, this use case will no longer be supported.
Instead, have the one use case create its own buffer to store the first
event when looking at the next event. This way, when looking at the first
event again, it wont be corrupted by the second read.
Link: http://lkml.kernel.org/r/20200317213415.722539921@goodmis.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Clang warns:
../kernel/trace/trace.c:9335:33: warning: array comparison always
evaluates to true [-Wtautological-compare]
if (__stop___trace_bprintk_fmt != __start___trace_bprintk_fmt)
^
1 warning generated.
These are not true arrays, they are linker defined symbols, which are
just addresses. Using the address of operator silences the warning and
does not change the runtime result of the check (tested with some print
statements compiled in with clang + ld.lld and gcc + ld.bfd in QEMU).
Link: http://lkml.kernel.org/r/20200220051011.26113-1-natechancellor@gmail.com
Link: https://github.com/ClangBuiltLinux/linux/issues/893
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This reverts commit d441dceb5d due to
boot failures.
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Simplify gen_btf logic to make it work with llvm-objcopy. The existing
'file format' and 'architecture' parsing logic is brittle and does not
work with llvm-objcopy/llvm-objdump.
'file format' output of llvm-objdump>=11 will match GNU objdump, but
'architecture' (bfdarch) may not.
.BTF in .tmp_vmlinux.btf is non-SHF_ALLOC. Add the SHF_ALLOC flag
because it is part of vmlinux image used for introspection. C code
can reference the section via linker script defined __start_BTF and
__stop_BTF. This fixes a small problem that previous .BTF had the
SHF_WRITE flag (objcopy -I binary -O elf* synthesized .data).
Additionally, `objcopy -I binary` synthesized symbols
_binary__btf_vmlinux_bin_start and _binary__btf_vmlinux_bin_stop (not
used elsewhere) are replaced with more commonplace __start_BTF and
__stop_BTF.
Add 2>/dev/null because GNU objcopy (but not llvm-objcopy) warns
"empty loadable segment detected at vaddr=0xffffffff81000000, is this intentional?"
We use a dd command to change the e_type field in the ELF header from
ET_EXEC to ET_REL so that lld will accept .btf.vmlinux.bin.o. Accepting
ET_EXEC as an input file is an extremely rare GNU ld feature that lld
does not intend to support, because this is error-prone.
The output section description .BTF in include/asm-generic/vmlinux.lds.h
avoids potential subtle orphan section placement issues and suppresses
--orphan-handling=warn warnings.
Fixes: df786c9b94 ("bpf: Force .BTF section start to zero when dumping from vmlinux")
Fixes: cb0cc635c7 ("powerpc: Include .BTF section")
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Fangrui Song <maskray@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Stanislav Fomichev <sdf@google.com>
Tested-by: Andrii Nakryiko <andriin@fb.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Link: https://github.com/ClangBuiltLinux/linux/issues/871
Link: https://lore.kernel.org/bpf/20200318222746.173648-1-maskray@google.com
To minimize latency, PREEMPT_RT kernels expires hrtimers in preemptible
softirq context by default. This can be overriden by marking the timer's
expiry with HRTIMER_MODE_HARD.
sched_clock_timer is missing this annotation: if its callback is preempted
and the duration of the preemption exceeds the wrap around time of the
underlying clocksource, sched clock will get out of sync.
Mark the sched_clock_timer for expiry in hard interrupt context.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200309181529.26558-1-a.darwish@linutronix.de
HWRNG_MINOR and RNG_MISCDEV_MINOR are duplicate definitions, use
unified HWRNG_MINOR instead and moved into miscdevice.h
ANSLCD_MINOR and LCD_MINOR are duplicate definitions, use unified
LCD_MINOR instead and moved into miscdevice.h
MISCDEV_MINOR is renamed to PXA3XX_GCU_MINOR and moved into
miscdevice.h
Other definitions are just moved without any change.
Link: https://lore.kernel.org/lkml/20200120221323.GJ15860@mit.edu/t/
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Build-tested-by: Willy TARREAU <wtarreau@haproxy.com>
Build-tested-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://lore.kernel.org/r/20200311071654.335-2-zhenzhong.duan@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The bpf_struct_ops tcp-cc name should be sanitized in order to
avoid problematic chars (e.g. whitespaces).
This patch reuses the bpf_obj_name_cpy() for accepting the same set
of characters in order to keep a consistent bpf programming experience.
A "size" param is added. Also, the strlen is returned on success so
that the caller (like the bpf_tcp_ca here) can error out on empty name.
The existing callers of the bpf_obj_name_cpy() only need to change the
testing statement to "if (err < 0)". For all these existing callers,
the err will be overwritten later, so no extra change is needed
for the new strlen return value.
v3:
- reverse xmas tree style
v2:
- Save the orig_src to avoid "end - size" (Andrii)
Fixes: 0baf26b0fc ("bpf: tcp: Support tcp_congestion_ops in bpf")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200314010209.1131542-1-kafai@fb.com
We need the console patches in here as well for futher work from Andy.
* 'for-5.7-console-exit' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
console: Introduce ->exit() callback
console: Don't notify user space when unregister non-listed console
console: Avoid positive return code from unregister_console()
console: Drop misleading comment
console: Use for_each_console() helper in unregister_console()
console: Drop double check for console_drivers being non-NULL
console: Don't perform test for CON_BRL flag
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When dma_mmap_coherent() sets up a mapping to unencrypted coherent memory
under SEV encryption and sometimes under SME encryption, it will actually
set up an encrypted mapping rather than an unencrypted, causing devices
that DMAs from that memory to read encrypted contents. Fix this.
When force_dma_unencrypted() returns true, the linear kernel map of the
coherent pages have had the encryption bit explicitly cleared and the
page content is unencrypted. Make sure that any additional PTEs we set
up to these pages also have the encryption bit cleared by having
dma_pgprot() return a protection with the encryption bit cleared in this
case.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lkml.kernel.org/r/20200304114527.3636-3-thomas_os@shipmail.org
This patch turns on xattr support for cgroupfs. This is useful for
letting non-root owners of delegated subtrees attach metadata to
cgroups.
One use case is for subtree owners to tell a userspace out of memory
killer to bias away from killing specific subtrees.
Tests:
[/sys/fs/cgroup]# for i in $(seq 0 130); \
do setfattr workload.slice -n user.name$i -v wow; done
setfattr: workload.slice: No space left on device
setfattr: workload.slice: No space left on device
setfattr: workload.slice: No space left on device
[/sys/fs/cgroup]# for i in $(seq 0 130); \
do setfattr workload.slice --remove user.name$i; done
setfattr: workload.slice: No such attribute
setfattr: workload.slice: No such attribute
setfattr: workload.slice: No such attribute
[/sys/fs/cgroup]# for i in $(seq 0 130); \
do setfattr workload.slice -n user.name$i -v wow; done
setfattr: workload.slice: No space left on device
setfattr: workload.slice: No space left on device
setfattr: workload.slice: No space left on device
`seq 0 130` is inclusive, and 131 - 128 = 3, which is the number of
errors we expect to see.
[/data]# cat testxattr.c
#include <sys/types.h>
#include <sys/xattr.h>
#include <stdio.h>
#include <stdlib.h>
int main() {
char name[256];
char *buf = malloc(64 << 10);
if (!buf) {
perror("malloc");
return 1;
}
for (int i = 0; i < 4; ++i) {
snprintf(name, 256, "user.bigone%d", i);
if (setxattr("/sys/fs/cgroup/system.slice", name, buf,
64 << 10, 0)) {
printf("setxattr failed on iteration=%d\n", i);
return 1;
}
}
return 0;
}
[/data]# ./a.out
setxattr failed on iteration=2
[/data]# ./a.out
setxattr failed on iteration=0
[/sys/fs/cgroup]# setfattr -x user.bigone0 system.slice/
[/sys/fs/cgroup]# setfattr -x user.bigone1 system.slice/
[/data]# ./a.out
setxattr failed on iteration=2
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Acked-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
This allows the arch code to reset the page tables to cached access when
freeing a dma coherent allocation that was set to uncached using
arch_dma_set_uncached.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Rename the symbol to arch_dma_set_uncached, and pass a size to it as
well as allow an error return. That will allow reusing this hook for
in-place pagetable remapping.
As the in-place remap doesn't always require an explicit cache flush,
also detangle ARCH_HAS_DMA_PREP_COHERENT from ARCH_HAS_DMA_SET_UNCACHED.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
pageno is an int and the PAGE_SHIFT shift is done on an int,
overflowing if the memory is bigger than 2G
This can be reproduced using for example a reserved-memory of 4G
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
reserved_dma: buffer@0 {
compatible = "shared-dma-pool";
no-map;
reg = <0x5 0x00000000 0x1 0x0>;
};
};
Signed-off-by: Kevin Grandemange <kevin.grandemange@allegrodvt.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
prevent inodes from vanishing, but ihold() does not guarantee inode
persistence. Replace the inode pointer with a per boot, machine wide,
unique inode identifier. The second commit fixes the breakage of the hash
mechanism whihc causes a 100% performance regression.
-----BEGIN PGP SIGNATURE-----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=e2iB
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull futex fix from Thomas Gleixner:
"Fix for yet another subtle futex issue.
The futex code used ihold() to prevent inodes from vanishing, but
ihold() does not guarantee inode persistence. Replace the inode
pointer with a per boot, machine wide, unique inode identifier.
The second commit fixes the breakage of the hash mechanism which
causes a 100% performance regression"
* tag 'locking-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Unbreak futex hashing
futex: Fix inode life-time issue
which caused sys/sysinfo to be inconsistent with /proc/uptime when read
from a task inside a time namespace.
-----BEGIN PGP SIGNATURE-----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=Is++
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A single fix adding the missing time namespace adjustment in
sys/sysinfo which caused sys/sysinfo to be inconsistent with
/proc/uptime when read from a task inside a time namespace"
* tag 'timers-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sys/sysinfo: Respect boottime inside time namespace
Since the SNAPSHOT_GET_IMAGE_SIZE, SNAPSHOT_AVAIL_SWAP_SIZE, and
SNAPSHOT_ALLOC_SWAP_PAGE ioctls produce an loff_t result, and loff_t is
always 64-bit even in the compat case, there's no reason to have the
special compat handling for these ioctls. Just remove this unneeded
code so that these ioctls call into snapshot_ioctl() directly, doing
just the compat_ptr() conversion on the argument.
(This unnecessary code was also causing a KMSAN false positive.)
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-03-13
The following pull-request contains BPF updates for your *net-next* tree.
We've added 86 non-merge commits during the last 12 day(s) which contain
a total of 107 files changed, 5771 insertions(+), 1700 deletions(-).
The main changes are:
1) Add modify_return attach type which allows to attach to a function via
BPF trampoline and is run after the fentry and before the fexit programs
and can pass a return code to the original caller, from KP Singh.
2) Generalize BPF's kallsyms handling and add BPF trampoline and dispatcher
objects to be visible in /proc/kallsyms so they can be annotated in
stack traces, from Jiri Olsa.
3) Extend BPF sockmap to allow for UDP next to existing TCP support in order
in order to enable this for BPF based socket dispatch, from Lorenz Bauer.
4) Introduce a new bpftool 'prog profile' command which attaches to existing
BPF programs via fentry and fexit hooks and reads out hardware counters
during that period, from Song Liu. Example usage:
bpftool prog profile id 337 duration 3 cycles instructions llc_misses
4228 run_cnt
3403698 cycles (84.08%)
3525294 instructions # 1.04 insn per cycle (84.05%)
13 llc_misses # 3.69 LLC misses per million isns (83.50%)
5) Batch of improvements to libbpf, bpftool and BPF selftests. Also addition
of a new bpf_link abstraction to keep in particular BPF tracing programs
attached even when the applicaion owning them exits, from Andrii Nakryiko.
6) New bpf_get_current_pid_tgid() helper for tracing to perform PID filtering
and which returns the PID as seen by the init namespace, from Carlos Neira.
7) Refactor of RISC-V JIT code to move out common pieces and addition of a
new RV32G BPF JIT compiler, from Luke Nelson.
8) Add gso_size context member to __sk_buff in order to be able to know whether
a given skb is GSO or not, from Willem de Bruijn.
9) Add a new bpf_xdp_output() helper which reuses XDP's existing perf RB output
implementation but can be called from tracepoint programs, from Eelco Chaudron.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Sparse reports a warning at __bpf_prog_enter() and __bpf_prog_exit()
warning: context imbalance in __bpf_prog_enter() - wrong count at exit
warning: context imbalance in __bpf_prog_exit() - unexpected unlock
The root cause is the missing annotation at __bpf_prog_enter()
and __bpf_prog_exit()
Add the missing __acquires(RCU) annotation
Add the missing __releases(RCU) annotation
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200311010908.42366-2-jbi.octave@gmail.com
Now that we have all the objects (bpf_prog, bpf_trampoline,
bpf_dispatcher) linked in bpf_tree, there's no need to have
separate bpf_image tree for images.
Reverting the bpf_image tree together with struct bpf_image,
because it's no longer needed.
Also removing bpf_image_alloc function and adding the original
bpf_jit_alloc_exec_page interface instead.
The kernel_text_address function can now rely only on is_bpf_text_address,
because it checks the bpf_tree that contains all the objects.
Keeping bpf_image_ksym_add and bpf_image_ksym_del because they are
useful wrappers with perf's ksymbol interface calls.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200312195610.346362-13-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding dispatchers to kallsyms. It's displayed as
bpf_dispatcher_<NAME>
where NAME is the name of dispatcher.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200312195610.346362-12-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding trampolines to kallsyms. It's displayed as
bpf_trampoline_<ID> [bpf]
where ID is the BTF id of the trampoline function.
Adding bpf_image_ksym_add/del functions that setup
the start/end values and call KSYMBOL perf events
handlers.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200312195610.346362-11-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Separating /proc/kallsyms add/del code and adding bpf_ksym_add/del
functions for that.
Moving bpf_prog_ksym_node_add/del functions to __bpf_ksym_add/del
and changing their argument to 'struct bpf_ksym' object. This way
we can call them for other bpf objects types like trampoline and
dispatcher.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200312195610.346362-10-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding 'prog' bool flag to 'struct bpf_ksym' to mark that
this object belongs to bpf_prog object.
This change allows having bpf_prog objects together with
other types (trampolines and dispatchers) in the single
bpf_tree. It's used when searching for bpf_prog exception
tables by the bpf_prog_ksym_find function, where we need
to get the bpf_prog pointer.
>From now we can safely add bpf_ksym support for trampoline
or dispatcher objects, because we can differentiate them
from bpf_prog objects.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200312195610.346362-9-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding bpf_ksym_find function that is used bpf bpf address
lookup functions:
__bpf_address_lookup
is_bpf_text_address
while keeping bpf_prog_kallsyms_find to be used only for lookup
of bpf_prog objects (will happen in following changes).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200312195610.346362-8-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Moving ksym_tnode list node to 'struct bpf_ksym' object,
so the symbol itself can be chained and used in other
objects like bpf_trampoline and bpf_dispatcher.
We need bpf_ksym object to be linked both in bpf_kallsyms
via lnode for /proc/kallsyms and in bpf_tree via tnode for
bpf address lookup functions like __bpf_address_lookup or
bpf_prog_kallsyms_find.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200312195610.346362-7-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding lnode list node to 'struct bpf_ksym' object,
so the struct bpf_ksym itself can be chained and used
in other objects like bpf_trampoline and bpf_dispatcher.
Changing iterator to bpf_ksym in bpf_get_kallsym function.
The ksym->start is holding the prog->bpf_func value,
so it's ok to use it as value in bpf_get_kallsym.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200312195610.346362-6-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding name to 'struct bpf_ksym' object to carry the name
of the symbol for bpf_prog, bpf_trampoline, bpf_dispatcher
objects.
The current benefit is that name is now generated only when
the symbol is added to the list, so we don't need to generate
it every time it's accessed.
The future benefit is that we will have all the bpf objects
symbols represented by struct bpf_ksym.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200312195610.346362-5-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding 'struct bpf_ksym' object that will carry the
kallsym information for bpf symbol. Adding the start
and end address to begin with. It will be used by
bpf_prog, bpf_trampoline, bpf_dispatcher objects.
The symbol_start/symbol_end values were originally used
to sort bpf_prog objects. For the address displayed in
/proc/kallsyms we are using prog->bpf_func value.
I'm using the bpf_func value for program symbol start
instead of the symbol_start, because it makes no difference
for sorting bpf_prog objects and we can use it directly as
an address to display it in /proc/kallsyms.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200312195610.346362-4-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Instead of requiring users to do three steps for cleaning up bpf_link, its
anon_inode file, and unused fd, abstract that away into bpf_link_cleanup()
helper. bpf_link_defunct() is removed, as it shouldn't be needed as an
individual operation anymore.
v1->v2:
- keep bpf_link_cleanup() static for now (Daniel).
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200313002128.2028680-1-andriin@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexei Starovoitov says:
====================
pull-request: bpf 2020-03-12
The following pull-request contains BPF updates for your *net* tree.
We've added 12 non-merge commits during the last 8 day(s) which contain
a total of 12 files changed, 161 insertions(+), 15 deletions(-).
The main changes are:
1) Andrii fixed two bugs in cgroup-bpf.
2) John fixed sockmap.
3) Luke fixed x32 jit.
4) Martin fixed two issues in struct_ops.
5) Yonghong fixed bpf_send_signal.
6) Yoshiki fixed BTF enum.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce new helper that reuses existing xdp perf_event output
implementation, but can be called from raw_tracepoint programs
that receive 'struct xdp_buff *' as a tracepoint argument.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/158348514556.2239.11050972434793741444.stgit@xdp-tutorial
New bpf helper bpf_get_ns_current_pid_tgid,
This helper will return pid and tgid from current task
which namespace matches dev_t and inode number provided,
this will allows us to instrument a process inside a container.
Signed-off-by: Carlos Neira <cneirabustos@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200304204157.58695-3-cneirabustos@gmail.com
Pull networking fixes from David Miller:
"It looks like a decent sized set of fixes, but a lot of these are one
liner off-by-one and similar type changes:
1) Fix netlink header pointer to calcular bad attribute offset
reported to user. From Pablo Neira Ayuso.
2) Don't double clear PHY interrupts when ->did_interrupt is set,
from Heiner Kallweit.
3) Add missing validation of various (devlink, nl802154, fib, etc.)
attributes, from Jakub Kicinski.
4) Missing *pos increments in various netfilter seq_next ops, from
Vasily Averin.
5) Missing break in of_mdiobus_register() loop, from Dajun Jin.
6) Don't double bump tx_dropped in veth driver, from Jiang Lidong.
7) Work around FMAN erratum A050385, from Madalin Bucur.
8) Make sure ARP header is pulled early enough in bonding driver,
from Eric Dumazet.
9) Do a cond_resched() during multicast processing of ipvlan and
macvlan, from Mahesh Bandewar.
10) Don't attach cgroups to unrelated sockets when in interrupt
context, from Shakeel Butt.
11) Fix tpacket ring state management when encountering unknown GSO
types. From Willem de Bruijn.
12) Fix MDIO bus PHY resume by checking mdio_bus_phy_may_suspend()
only in the suspend context. From Heiner Kallweit"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits)
net: systemport: fix index check to avoid an array out of bounds access
tc-testing: add ETS scheduler to tdc build configuration
net: phy: fix MDIO bus PM PHY resuming
net: hns3: clear port base VLAN when unload PF
net: hns3: fix RMW issue for VLAN filter switch
net: hns3: fix VF VLAN table entries inconsistent issue
net: hns3: fix "tc qdisc del" failed issue
taprio: Fix sending packets without dequeueing them
net: mvmdio: avoid error message for optional IRQ
net: dsa: mv88e6xxx: Add missing mask of ATU occupancy register
net: memcg: fix lockdep splat in inet_csk_accept()
s390/qeth: implement smarter resizing of the RX buffer pool
s390/qeth: refactor buffer pool code
s390/qeth: use page pointers to manage RX buffer pool
seg6: fix SRv6 L2 tunnels to use IANA-assigned protocol number
net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed
net/packet: tpacket_rcv: do not increment ring index on drop
sxgbe: Fix off by one in samsung driver strncpy size arg
net: caif: Add lockdep expression to RCU traversal primitive
MAINTAINERS: remove Sathya Perla as Emulex NIC maintainer
...
cgrp->root->release_agent_path is protected by both cgroup_mutex and
release_agent_path_lock and readers can hold either one. The
dual-locking scheme was introduced while breaking a locking dependency
issue around cgroup_mutex but doesn't make sense anymore given that
the only remaining reader which uses cgroup_mutex is
cgroup1_releaes_agent().
This patch updates cgroup1_release_agent() to use
release_agent_path_lock so that release_agent_path is always protected
only by release_agent_path_lock.
While at it, convert strlen() based empty string checks to direct
tests on the first character as suggested by Linus.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
[ 7329.671518] BUG: KCSAN: data-race in flush_workqueue / flush_workqueue
[ 7329.671549]
[ 7329.671572] write to 0xffff8881f65fb250 of 8 bytes by task 37173 on cpu 2:
[ 7329.671607] flush_workqueue+0x3bc/0x9b0 (kernel/workqueue.c:2844)
[ 7329.672527]
[ 7329.672540] read to 0xffff8881f65fb250 of 8 bytes by task 37175 on cpu 0:
[ 7329.672571] flush_workqueue+0x28d/0x9b0 (kernel/workqueue.c:2835)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tejun Heo <tj@kernel.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
When there are no audit rules registered, mandatory records (config,
etc.) are missing their accompanying records (syscall, proctitle, etc.).
This is due to audit context dummy set on syscall entry based on absence
of rules that signals that no other records are to be printed.
Clear the dummy bit if any record is generated.
The proctitle context and dummy checks are pointless since the
proctitle record will not be printed if no syscall records are printed.
Please see upstream github issue
https://github.com/linux-audit/audit-kernel/issues/120
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXmebNQAKCRCRxhvAZXjc
ohidAP4y7sujHKMe87Qd6RFQ+aPTB1cGVgBSyMV5DuvbTW0R9QEA/bWSUtye5+Ln
WRDkXapGM2l36s02xspgokaAhYiFoAE=
=a6eO
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2020-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull thread fix from Christian Brauner:
"This contains a single fix for a regression which was introduced when
we introduced the ability to select a specific pid at process creation
time.
When this feature is requested, the error value will be set to -EPERM
after exiting the pid allocation loop. This caused EPERM to be
returned when e.g. the init process/child subreaper of the pid
namespace has already died where we used to return ENOMEM before.
The first patch here simply fixes the regression by unconditionally
setting the return value back to ENOMEM again once we've successfully
allocated the requested pid number. This should be easy to backport to
v5.5.
The second patch adds a comment explaining that we must keep returning
ENOMEM since we've been doing it for a long time and have explicitly
documented this behavior for userspace. This seemed worthwhile because
we now have at least two separate example where people tried to change
the return value to something other than ENOMEM (The first version of
the regression fix did that too and the commit message links to an
earlier patch that tried to do the same.).
I have a simple regression test to make sure we catch this regression
in the future but since that introduces a whole new selftest subdir
and test files I'll keep this for v5.7"
* tag 'for-linus-2020-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
pid: make ENOMEM return value more obvious
pid: Fix error return value in some cases
can break live patching.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXmj5ExQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6quQGAQDO35RBAQDGmpxnSCQPNwrzqokM8p8d
1e1xshwOVnwqgAEA7csC4u1n5Z8ncIl5Pd8ygt4nXeqw4AenHLeZIdhfegc=
=+AeW
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull ftrace fix from Steven Rostedt:
"Have ftrace lookup_rec() return a consistent record otherwise it can
break live patching"
* tag 'trace-v5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Return the first found result in lookup_rec()
It appears that ip ranges can overlap so. In that case lookup_rec()
returns whatever results it got last even if it found nothing in last
searched page.
This breaks an obscure livepatch late module patching usecase:
- load livepatch
- load the patched module
- unload livepatch
- try to load livepatch again
To fix this return from lookup_rec() as soon as it found the record
containing searched-for ip. This used to be this way prior lookup_rec()
introduction.
Link: http://lkml.kernel.org/r/20200306174317.21699-1-asavkov@redhat.com
Cc: stable@vger.kernel.org
Fixes: 7e16f581a8 ("ftrace: Separate out functionality from ftrace_location_range()")
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add bpf_link_new_file() API for cases when we need to ensure anon_inode is
successfully created before we proceed with expensive BPF program attachment
procedure, which will require equally (if not more so) expensive and
potentially failing compensation detachment procedure just because anon_inode
creation failed. This API allows to simplify code by ensuring first that
anon_inode is created and after BPF program is attached proceed with
fd_install() that can't fail.
After anon_inode file is created, link can't be just kfree()'d anymore,
because its destruction will be performed by deferred file_operations->release
call. For this, bpf_link API required specifying two separate operations:
release() and dealloc(), former performing detachment only, while the latter
frees memory used by bpf_link itself. dealloc() needs to be specified, because
struct bpf_link is frequently embedded into link type-specific container
struct (e.g., struct bpf_raw_tp_link), so bpf_link itself doesn't know how to
properly free the memory. In case when anon_inode file was successfully
created, but subsequent BPF attachment failed, bpf_link needs to be marked as
"defunct", so that file's release() callback will perform only memory
deallocation, but no detachment.
Convert raw tracepoint and tracing attachment to new API and eliminate
detachment from error handling path.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200309231051.1270337-1-andriin@fb.com
We are testing network memory accounting in our setup and noticed
inconsistent network memory usage and often unrelated cgroups network
usage correlates with testing workload. On further inspection, it
seems like mem_cgroup_sk_alloc() and cgroup_sk_alloc() are broken in
irq context specially for cgroup v1.
mem_cgroup_sk_alloc() and cgroup_sk_alloc() can be called in irq context
and kind of assumes that this can only happen from sk_clone_lock()
and the source sock object has already associated cgroup. However in
cgroup v1, where network memory accounting is opt-in, the source sock
can be unassociated with any cgroup and the new cloned sock can get
associated with unrelated interrupted cgroup.
Cgroup v2 can also suffer if the source sock object was created by
process in the root cgroup or if sk_alloc() is called in irq context.
The fix is to just do nothing in interrupt.
WARNING: Please note that about half of the TCP sockets are allocated
from the IRQ context, so, memory used by such sockets will not be
accouted by the memcg.
The stack trace of mem_cgroup_sk_alloc() from IRQ-context:
CPU: 70 PID: 12720 Comm: ssh Tainted: 5.6.0-smp-DEV #1
Hardware name: ...
Call Trace:
<IRQ>
dump_stack+0x57/0x75
mem_cgroup_sk_alloc+0xe9/0xf0
sk_clone_lock+0x2a7/0x420
inet_csk_clone_lock+0x1b/0x110
tcp_create_openreq_child+0x23/0x3b0
tcp_v6_syn_recv_sock+0x88/0x730
tcp_check_req+0x429/0x560
tcp_v6_rcv+0x72d/0xa40
ip6_protocol_deliver_rcu+0xc9/0x400
ip6_input+0x44/0xd0
? ip6_protocol_deliver_rcu+0x400/0x400
ip6_rcv_finish+0x71/0x80
ipv6_rcv+0x5b/0xe0
? ip6_sublist_rcv+0x2e0/0x2e0
process_backlog+0x108/0x1e0
net_rx_action+0x26b/0x460
__do_softirq+0x104/0x2a6
do_softirq_own_stack+0x2a/0x40
</IRQ>
do_softirq.part.19+0x40/0x50
__local_bh_enable_ip+0x51/0x60
ip6_finish_output2+0x23d/0x520
? ip6table_mangle_hook+0x55/0x160
__ip6_finish_output+0xa1/0x100
ip6_finish_output+0x30/0xd0
ip6_output+0x73/0x120
? __ip6_finish_output+0x100/0x100
ip6_xmit+0x2e3/0x600
? ipv6_anycast_cleanup+0x50/0x50
? inet6_csk_route_socket+0x136/0x1e0
? skb_free_head+0x1e/0x30
inet6_csk_xmit+0x95/0xf0
__tcp_transmit_skb+0x5b4/0xb20
__tcp_send_ack.part.60+0xa3/0x110
tcp_send_ack+0x1d/0x20
tcp_rcv_state_process+0xe64/0xe80
? tcp_v6_connect+0x5d1/0x5f0
tcp_v6_do_rcv+0x1b1/0x3f0
? tcp_v6_do_rcv+0x1b1/0x3f0
__release_sock+0x7f/0xd0
release_sock+0x30/0xa0
__inet_stream_connect+0x1c3/0x3b0
? prepare_to_wait+0xb0/0xb0
inet_stream_connect+0x3b/0x60
__sys_connect+0x101/0x120
? __sys_getsockopt+0x11b/0x140
__x64_sys_connect+0x1a/0x20
do_syscall_64+0x51/0x200
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The stack trace of mem_cgroup_sk_alloc() from IRQ-context:
Fixes: 2d75807383 ("mm: memcontrol: consolidate cgroup socket tracking")
Fixes: d979a39d72 ("cgroup: duplicate cgroup reference when cloning sockets")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull cgroup fixes from Tejun Heo:
- cgroup.procs listing related fixes.
It didn't interlock properly with exiting tasks leaving a short
window where a cgroup has empty cgroup.procs but still can't be
removed and misbehaved on short reads.
- psi_show() crash fix on 32bit ino archs
- Empty release_agent handling fix
* 'for-5.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup1: don't call release_agent when it is ""
cgroup: fix psi_show() crash on 32bit ino archs
cgroup: Iterate tasks that did not finish do_exit()
cgroup: cgroup_procs_next should increase position index
cgroup-v1: cgroup_pidlist_next should update position index
Pull workqueue fixes from Tejun Heo:
"Workqueue has been incorrectly round-robining per-cpu work items.
Hillf's patch fixes that.
The other patch documents memory-ordering properties of workqueue
operations"
* 'for-5.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: don't use wq_select_unbound_cpu() for bound works
workqueue: Document (some) memory-ordering properties of {queue,schedule}_work()
btf_enum_check_member() was currently sure to recognize the size of
"enum" type members in struct/union as the size of "int" even if
its size was packed.
This patch fixes BTF enum verification to use the correct size
of member in BPF programs.
Fixes: 179cde8cef ("bpf: btf: Check members of struct/union")
Signed-off-by: Yoshiki Komachi <komachi.yoshiki@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/1583825550-18606-2-git-send-email-komachi.yoshiki@gmail.com
wq_select_unbound_cpu() is designed for unbound workqueues only, but
it's wrongly called when using a bound workqueue too.
Fixing this ensures work queued to a bound workqueue with
cpu=WORK_CPU_UNBOUND always runs on the local CPU.
Before, that would happen only if wq_unbound_cpumask happened to include
it (likely almost always the case), or was empty, or we got lucky with
forced round-robin placement. So restricting
/sys/devices/virtual/workqueue/cpumask to a small subset of a machine's
CPUs would cause some bound work items to run unexpectedly there.
Fixes: ef55718044 ("workqueue: schedule WORK_CPU_UNBOUND work on wq_unbound_cpumask CPUs")
Cc: stable@vger.kernel.org # v4.5+
Signed-off-by: Hillf Danton <hdanton@sina.com>
[dj: massage changelog]
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
We need the vt fixes in here and it resolves a merge issue with
drivers/tty/vt/selection.c
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no compensating cgroup_bpf_put() for each ancestor cgroup in
cgroup_bpf_inherit(). If compute_effective_progs returns error, those cgroups
won't be freed ever. Fix it by putting them in cleanup code path.
Fixes: e10360f815 ("bpf: cgroup: prevent out-of-order release of cgroup bpf")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Roman Gushchin <guro@fb.com>
Link: https://lore.kernel.org/bpf/20200309224017.1063297-1-andriin@fb.com
The alloc_pid() codepath used to be simpler. With the introducation of the
ability to choose specific pids in 49cb2fc42c ("fork: extend clone3() to
support setting a PID") it got more complex. It hasn't been super obvious
that ENOMEM is returned when the pid namespace init process/child subreaper
of the pid namespace has died. As can be seen from multiple attempts to
improve this see e.g. [1] and most recently [2].
We regressed returning ENOMEM in [3] and [2] restored it. Let's add a
comment on top explaining that this is historic and documented behavior and
cannot easily be changed.
[1]: 35f71bc0a0 ("fork: report pid reservation failure properly")
[2]: b26ebfe12f ("pid: Fix error return value in some cases")
[3]: 49cb2fc42c ("fork: extend clone3() to support setting a PID")
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
The recent futex inode life time fix changed the ordering of the futex key
union struct members, but forgot to adjust the hash function accordingly,
As a result the hashing omits the leading 64bit and even hashes beyond the
futex key causing a bad hash distribution which led to a ~100% performance
regression.
Hand in the futex key pointer instead of a random struct member and make
the size calculation based of the struct offset.
Fixes: 8019ad13ef ("futex: Fix inode life-time issue")
Reported-by: Rong Chen <rong.a.chen@intel.com>
Decoded-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Rong Chen <rong.a.chen@intel.com>
Link: https://lkml.kernel.org/r/87h7yy90ve.fsf@nanos.tec.linutronix.de
Recent changes to alloc_pid() allow the pid number to be specified on
the command line. If set_tid_size is set, then the code scanning the
levels will hard-set retval to -EPERM, overriding it's previous -ENOMEM
value.
After the code scanning the levels, there are error returns that do not
set retval, assuming it is still set to -ENOMEM.
So set retval back to -ENOMEM after scanning the levels.
Fixes: 49cb2fc42c ("fork: extend clone3() to support setting a PID")
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Adrian Reber <areber@redhat.com>
Cc: <stable@vger.kernel.org> # 5.5
Link: https://lore.kernel.org/r/20200306172314.12232-1-minyard@acm.org
[christian.brauner@ubuntu.com: fixup commit message]
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
irq_domain_alloc_irqs_hierarchy() has 3 call sites in the compilation unit
but only one of them checks for the pointer which is being dereferenced
inside the called function. Move the check into the function. This allows
for catching the error instead of the following crash:
Unable to handle kernel NULL pointer dereference at virtual address 00000000
PC is at 0x0
LR is at gpiochip_hierarchy_irq_domain_alloc+0x11f/0x140
...
[<c06c23ff>] (gpiochip_hierarchy_irq_domain_alloc)
[<c0462a89>] (__irq_domain_alloc_irqs)
[<c0462dad>] (irq_create_fwspec_mapping)
[<c06c2251>] (gpiochip_to_irq)
[<c06c1c9b>] (gpiod_to_irq)
[<bf973073>] (gpio_irqs_init [gpio_irqs])
[<bf974048>] (gpio_irqs_exit+0xecc/0xe84 [gpio_irqs])
Code: bad PC value
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200306174720.82604-1-alexander.sverdlin@nokia.com
Error injection mechanisms need a half ways safe way to inject interrupts as
invoking generic_handle_irq() or the actual device interrupt handler
directly from e.g. a debugfs write is not guaranteed to be safe.
On x86 generic_handle_irq() is unsafe due to the hardware trainwreck which
is the base of x86 interrupt delivery and affinity management.
Move the irq debugfs injection code into a separate function which can be
used by error injection code as well.
The implementation prevents at least that state is corrupted, but it cannot
close a very tiny race window on x86 which might result in a stale and not
serviced device interrupt under very unlikely circumstances.
This is explicitly for debugging and testing and not for production use or
abuse in random driver code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lkml.kernel.org/r/20200306130623.990928309@linutronix.de
The code sets IRQS_REPLAY unconditionally whether the resend happens or
not. That doesn't have bad side effects right now, but inconsistent state
is always a latent source of problems.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lkml.kernel.org/r/20200306130623.882129117@linutronix.de
In preparation for an interrupt injection interface which can be used
safely by error injection mechanisms. e.g. PCI-E/ AER, add a return value
to check_irq_resend() so errors can be propagated to the caller.
Split out the software resend code so the ugly #ifdef in check_irq_resend()
goes away and the whole thing becomes readable.
Fix up the caller in debugfs. The caller in irq_startup() does not care
about the return value as this is unconditionally invoked for all
interrupts and the resend is best effort anyway.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lkml.kernel.org/r/20200306130623.775200917@linutronix.de
In general calling generic_handle_irq() with interrupts disabled from non
interrupt context is harmless. For some interrupt controllers like the x86
trainwrecks this is outright dangerous as it might corrupt state if an
interrupt affinity change is pending.
Add infrastructure which allows to mark interrupts as unsafe and catch such
usage in generic_handle_irq().
Reported-by: sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lkml.kernel.org/r/20200306130623.590923677@linutronix.de
-----BEGIN PGP SIGNATURE-----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=xwKl
-----END PGP SIGNATURE-----
Merge tag 'block-5.6-2020-03-07' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Here are a few fixes that should go into this release. This contains:
- Revert of a bad bcache patch from this merge window
- Removed unused function (Daniel)
- Fixup for the blktrace fix from Jan from this release (Cengiz)
- Fix of deeper level bfqq overwrite in BFQ (Carlo)"
* tag 'block-5.6-2020-03-07' of git://git.kernel.dk/linux-block:
block, bfq: fix overwrite of bfq_group pointer in bfq_find_set_group()
blktrace: fix dereference after null check
Revert "bcache: ignore pending signals when creating gc and allocator thread"
block: Remove used kblockd_schedule_work_on()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXmNvpgAKCRCRxhvAZXjc
ouFvAQDCzfOx1vcEP/nNhYBP2MPuafKclJcoJggC9rSmIvcLiQD/TI+LyHzplD+m
MWSu9NZJ6h6qyjKJivja3/bs8DVEewU=
=4gyS
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2020-03-07' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux
Pull thread fixes from Christian Brauner:
"Here are a few hopefully uncontroversial fixes:
- Use RCU_INIT_POINTER() when initializing rcu protected members in
task_struct to fix sparse warnings.
- Add pidfd_fdinfo_test binary to .gitignore file"
* tag 'for-linus-2020-03-07' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux:
selftests: pidfd: Add pidfd_fdinfo_test in .gitignore
exit: Fix Sparse errors and warnings
fork: Use RCU_INIT_POINTER() instead of rcu_access_pointer()
Many embedded boards have a disconnected TTL level serial which can
generate some garbage that can lead to spurious false sysrq detects.
Currently, sysrq can be either completely disabled for serial console
or always disabled (with CONFIG_MAGIC_SYSRQ_SERIAL), since
commit 732dbf3a61 ("serial: do not accept sysrq characters via serial port")
At Arista, we have such boards that can generate BREAK and random
garbage. While disabling sysrq for serial console would solve
the problem with spurious false sysrq triggers, it's also desirable
to have a way to enable sysrq back.
Having the way to enable sysrq was beneficial to debug lockups with
a manual investigation in field and on the other side preventing false
sysrq detections.
As a preparation to add sysrq_toggle_support() call into uart,
remove a private copy of sysrq_enabled from sysctl - it should reflect
the actual status of sysrq.
Furthermore, the private copy isn't correct already in case
sysrq_always_enabled is true. So, remove __sysrq_enabled and use a
getter-helper sysrq_mask() to check sysrq_key_op enabled status.
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Dmitry Safonov <dima@arista.com>
Link: https://lore.kernel.org/r/20200302175135.269397-2-dima@arista.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/base/arch_topology.c is only built if CONFIG_GENERIC_ARCH_TOPOLOGY=y,
resulting in such build failures:
cpufreq_cooling.c:(.text+0x1e7): undefined reference to `arch_set_thermal_pressure'
Move it to sched/core.c instead, and keep it enabled on x86 despite
us not having a arch_scale_thermal_pressure() facility there, to
build-test this thing.
Cc: Thara Gopinath <thara.gopinath@linaro.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now smp_call_function_single_async() provides the protection that
we'll return with -EBUSY if the csd object is still pending, then we
don't need the rq.hrtick_csd_pending any more.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20191216213125.9536-4-peterx@redhat.com
Previously we will raise an warning if we want to insert a csd object
which is with the LOCK flag set, and if it happens we'll also wait for
the lock to be released. However, this operation does not match
perfectly with how the function is named - the name with "_async"
suffix hints that this function should not block, while we will.
This patch changed this behavior by simply return -EBUSY instead of
waiting, at the meantime we allow this operation to happen without
warning the user to change this into a feature when the caller wants
to "insert a csd object, if it's there, just wait for that one".
This is pretty safe because in flush_smp_call_function_queue() for
async csd objects (where csd->flags&SYNC is zero) we'll first do the
unlock then we call the csd->func(). So if we see the csd->flags&LOCK
is true in smp_call_function_single_async(), then it's guaranteed that
csd->func() will be called after this smp_call_function_single_async()
returns -EBUSY.
Update the comment of the function too to refect this.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20191216213125.9536-2-peterx@redhat.com
In task_woken_rt() and switched_to_rto() we try trigger push-pull if the
task is unfit.
But the logic is found lacking because if the task was the only one
running on the CPU, then rt_rq is not in overloaded state and won't
trigger a push.
The necessity of this logic was under a debate as well, a summary of
the discussion can be found in the following thread:
https://lore.kernel.org/lkml/20200226160247.iqvdakiqbakk2llz@e107158-lin.cambridge.arm.com/
Remove the logic for now until a better approach is agreed upon.
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fixes: 804d402fb6 ("sched/rt: Make RT capacity-aware")
Link: https://lkml.kernel.org/r/20200302132721.8353-6-qais.yousef@arm.com
When implemented RT Capacity Awareness; the logic was done such that if
a task was running on a fitting CPU, then it was sticky and we would try
our best to keep it there.
But as Steve suggested, to adhere to the strict priority rules of RT
class; allow pulling an RT task to unfitting CPU to ensure it gets a
chance to run ASAP.
LINK: https://lore.kernel.org/lkml/20200203111451.0d1da58f@oasis.local.home/
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fixes: 804d402fb6 ("sched/rt: Make RT capacity-aware")
Link: https://lkml.kernel.org/r/20200302132721.8353-5-qais.yousef@arm.com
By introducing a new cpupri_find_fitness() function that takes the
fitness_fn as an argument and only called when asym_system static key is
enabled.
cpupri_find() is now a wrapper function that calls cpupri_find_fitness()
passing NULL as a fitness_fn, hence disabling the logic that handles
fitness by default.
LINK: https://lore.kernel.org/lkml/c0772fca-0a4b-c88d-fdf2-5715fcf8447b@arm.com/
Reported-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fixes: 804d402fb6 ("sched/rt: Make RT capacity-aware")
Link: https://lkml.kernel.org/r/20200302132721.8353-4-qais.yousef@arm.com
When RT Capacity Aware support was added, the logic in select_task_rq_rt
was modified to force a search for a fitting CPU if the task currently
doesn't run on one.
But if the search failed, and the search was only triggered to fulfill
the fitness request; we could end up selecting a new CPU unnecessarily.
Fix this and re-instate the original behavior by ensuring we bail out
in that case.
This behavior change only affected asymmetric systems that are using
util_clamp to implement capacity aware. None asymmetric systems weren't
affected.
LINK: https://lore.kernel.org/lkml/20200218041620.GD28029@codeaurora.org/
Reported-by: Pavan Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fixes: 804d402fb6 ("sched/rt: Make RT capacity-aware")
Link: https://lkml.kernel.org/r/20200302132721.8353-3-qais.yousef@arm.com
When searching for the best lowest_mask with a fitness_fn passed, make
sure we record the lowest_level that returns a valid lowest_mask so that
we can use that as a fallback in case we fail to find a fitting CPU at
all levels.
The intention in the original patch was not to allow a down migration to
unfitting CPU. But this missed the case where we are already running on
unfitting one.
With this change now RT tasks can still move between unfitting CPUs when
they're already running on such CPU.
And as Steve suggested; to adhere to the strict priority rules of RT, if
a task is already running on a fitting CPU but due to priority it can't
run on it, allow it to downmigrate to unfitting CPU so it can run.
Reported-by: Pavan Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fixes: 804d402fb6 ("sched/rt: Make RT capacity-aware")
Link: https://lkml.kernel.org/r/20200302132721.8353-2-qais.yousef@arm.com
Link: https://lore.kernel.org/lkml/20200203142712.a7yvlyo2y3le5cpn@e107158-lin/
Even when a cgroup is throttled, the group se of a child cgroup can still
be enqueued and its gse->on_rq stays true. When a task is enqueued on such
child, we still have to update the load_avg and increase
h_nr_running of the throttled cfs. Nevertheless, the 1st
for_each_sched_entity() loop is skipped because of gse->on_rq == true and the
2nd loop because the cfs is throttled whereas we have to update both
load_avg with the old h_nr_running and increase h_nr_running in such case.
The same sequence can happen during dequeue when se moves to parent before
breaking in the 1st loop.
Note that the update of load_avg will effectively happen only once in order
to sync up to the throttled time. Next call for updating load_avg will stop
early because the clock stays unchanged.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fixes: 6d4d22468d ("sched/fair: Reorder enqueue/dequeue_task_fair path")
Link: https://lkml.kernel.org/r/20200306084208.12583-1-vincent.guittot@linaro.org
When a cfs_rq is throttled, its group entity is dequeued and its running
tasks are removed. We must update runnable_avg with the old h_nr_running
and update group_se->runnable_weight with the new h_nr_running at each
level of the hierarchy.
Reviewed-by: Ben Segall <bsegall@google.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fixes: 9f68395333 ("sched/pelt: Add a new runnable average signal")
Link: https://lkml.kernel.org/r/20200227154115.8332-1-vincent.guittot@linaro.org
Since commit 06a76fe08d ("sched/deadline: Move DL related code
from sched/core.c to sched/deadline.c"), DL related code moved to
deadline.c.
Make the following two functions static since they're only used in
deadline.c:
dl_change_utilization()
init_dl_rq_bw_ratio()
Signed-off-by: Yu Chen <chen.yu@easystack.cn>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200228100329.16927-1-chen.yu@easystack.cn
EAS already requires asymmetric CPU capacities to be enabled, and mixing
this with SMT is an aberration, but better be safe than sorry.
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Quentin Perret <qperret@google.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200227191433.31994-2-valentin.schneider@arm.com
Qian Cai reported the following bug:
The linux-next commit ff7db0bf24 ("sched/numa: Prefer using an idle CPU as a
migration target instead of comparing tasks") introduced a boot warning,
[ 86.520534][ T1] WARNING: suspicious RCU usage
[ 86.520540][ T1] 5.6.0-rc3-next-20200227 #7 Not tainted
[ 86.520545][ T1] -----------------------------
[ 86.520551][ T1] kernel/sched/fair.c:5914 suspicious rcu_dereference_check() usage!
[ 86.520555][ T1]
[ 86.520555][ T1] other info that might help us debug this:
[ 86.520555][ T1]
[ 86.520561][ T1]
[ 86.520561][ T1] rcu_scheduler_active = 2, debug_locks = 1
[ 86.520567][ T1] 1 lock held by systemd/1:
[ 86.520571][ T1] #0: ffff8887f4b14848 (&mm->mmap_sem#2){++++}, at: do_page_fault+0x1d2/0x998
[ 86.520594][ T1]
[ 86.520594][ T1] stack backtrace:
[ 86.520602][ T1] CPU: 1 PID: 1 Comm: systemd Not tainted 5.6.0-rc3-next-20200227 #7
task_numa_migrate() checks for idle cores when updating NUMA-related statistics.
This relies on reading a RCU-protected structure in test_idle_cores() via this
call chain
task_numa_migrate
-> update_numa_stats
-> numa_idle_core
-> test_idle_cores
While the locking could be fine-grained, it is more appropriate to acquire
the RCU lock for the entire scan of the domain. This patch removes the
warning triggered at boot time.
Reported-by: Qian Cai <cai@lca.pw>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fixes: ff7db0bf24 ("sched/numa: Prefer using an idle CPU as a migration target instead of comparing tasks")
Link: https://lkml.kernel.org/r/20200227191804.GJ3818@techsingularity.net
Building against the tip/sched/core as ff7db0bf24 ("sched/numa: Prefer
using an idle CPU as a migration target instead of comparing tasks") with
the arm64 defconfig (which doesn't have CONFIG_SCHED_SMT set) leads to:
kernel/sched/fair.c:1525:20: warning: 'test_idle_cores' declared 'static' but never defined [-Wunused-function]
static inline bool test_idle_cores(int cpu, bool def);
^~~~~~~~~~~~~~~
Rather than define it in its own CONFIG_SCHED_SMT #define island, bunch it
up with test_idle_cores().
Reported-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
[mgorman@techsingularity.net: Edit changelog, minor style change]
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fixes: ff7db0bf24 ("sched/numa: Prefer using an idle CPU as a migration target instead of comparing tasks")
Link: https://lkml.kernel.org/r/20200303110258.1092-3-mgorman@techsingularity.net
Thermal pressure follows pelt signals which means the decay period for
thermal pressure is the default pelt decay period. Depending on SoC
characteristics and thermal activity, it might be beneficial to decay
thermal pressure slower, but still in-tune with the pelt signals. One way
to achieve this is to provide a command line parameter to set a decay
shift parameter to an integer between 0 and 10.
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200222005213.3873-10-thara.gopinath@linaro.org
cpu_capacity initially reflects the maximum possible capacity of a CPU.
Thermal pressure on a CPU means this maximum possible capacity is
unavailable due to thermal events. This patch subtracts the average
thermal pressure for a CPU from its maximum possible capacity so that
cpu_capacity reflects the remaining maximum capacity.
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200222005213.3873-8-thara.gopinath@linaro.org
Introduce support in scheduler periodic tick and other CFS bookkeeping
APIs to trigger the process of computing average thermal pressure for a
CPU. Also consider avg_thermal.load_avg in others_have_blocked which
allows for decay of pelt signals.
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200222005213.3873-7-thara.gopinath@linaro.org
Extrapolating on the existing framework to track rt/dl utilization using
pelt signals, add a similar mechanism to track thermal pressure. The
difference here from rt/dl utilization tracking is that, instead of
tracking time spent by a CPU running a RT/DL task through util_avg, the
average thermal pressure is tracked through load_avg. This is because
thermal pressure signal is weighted time "delta" capacity unlike util_avg
which is binary. "delta capacity" here means delta between the actual
capacity of a CPU and the decreased capacity a CPU due to a thermal event.
In order to track average thermal pressure, a new sched_avg variable
avg_thermal is introduced. Function update_thermal_load_avg can be called
to do the periodic bookkeeping (accumulate, decay and average) of the
thermal pressure.
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200222005213.3873-2-thara.gopinath@linaro.org
As the vtime is sampled under loose seqcount protection by kcpustat, the
vtime fields may change as the code flows. Where logic dictates a field
has a static value, use a READ_ONCE.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fixes: 74722bb223 ("sched/vtime: Bring up complete kcpustat accessor")
Link: https://lkml.kernel.org/r/20200123180849.28486-1-frederic@kernel.org
If one is monitoring 6 events on 20 cgroups the per-CPU RB tree will
hold 120 events. The scheduling in of the events currently iterates
over all events looking to see which events match the task's cgroup or
its cgroup hierarchy. If a task is in 1 cgroup with 6 events, then 114
events are considered unnecessarily.
This change orders events in the RB tree by cgroup id if it is present.
This means scheduling in may go directly to events associated with the
task's cgroup if one is present. The per-CPU iterator storage in
visit_groups_merge is sized sufficent for an iterator per cgroup depth,
where different iterators are needed for the task's cgroup and parent
cgroups. By considering the set of iterators when visiting, the lowest
group_index event may be selected and the insertion order group_index
property is maintained. This also allows event rotation to function
correctly, as although events are grouped into a cgroup, rotation always
selects the lowest group_index event to rotate (delete/insert into the
tree) and the min heap of iterators make it so that the group_index order
is maintained.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20190724223746.153620-3-irogers@google.com
Allow the per-CPU min heap storage to have sufficient space for per-cgroup
iterators.
Based-on-work-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200214075133.181299-6-irogers@google.com
The storage required for visit_groups_merge's min heap needs to vary in
order to support more iterators, such as when multiple nested cgroups'
events are being visited. This change allows for 2 iterators and doesn't
support growth.
Based-on-work-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200214075133.181299-5-irogers@google.com
visit_groups_merge will pick the next event based on when it was
inserted in to the context (perf_event group_index). Events may be per CPU
or for any CPU, but in the future we'd also like to have per cgroup events
to avoid searching all events for the events to schedule for a cgroup.
Introduce a min heap for the events that maintains a property that the
earliest inserted event is always at the 0th element. Initialize the heap
with per-CPU and any-CPU events for the context.
Based-on-work-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200214075133.181299-4-irogers@google.com
Move perf_cgroup_connect() after perf_event_alloc(), such that we can
find/use the PMU's cpu context.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200214075133.181299-2-irogers@google.com
We can deduce the ctx and cpuctx from the event, no need to pass them
along. Remove the structure and pass in can_add_hw directly.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Less is more; unify the two very nearly identical function.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that {get,drop}_futex_key_refs() have become a glorified NOP,
remove them entirely.
The only thing get_futex_key_refs() is still doing is an smp_mb(), and
now that we don't need to (ab)use existing atomic ops to obtain them,
we can place it explicitly where we need it.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
We always set 'key->private.mm' to 'current->mm', getting an extra
reference on 'current->mm' is quite pointless, because as long as the
task is blocked it isn't going to go away.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
As reported by Jann, ihold() does not in fact guarantee inode
persistence. And instead of making it so, replace the usage of inode
pointers with a per boot, machine wide, unique inode identifier.
This sequence number is global, but shared (file backed) futexes are
rare enough that this should not become a performance issue.
Reported-by: Jann Horn <jannh@google.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Simplify the error handling in pcrypt_create_aead() by taking advantage
of crypto_grab_aead() now handling an ERR_PTR() name and by taking
advantage of crypto_drop_aead() now accepting (as a no-op) a spawn that
hasn't been grabbed yet.
This required also making padata_free_shell() accept a NULL argument.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
test_run.o is not built when CONFIG_NET is not set and
bpf_prog_test_run_tracing being referenced in bpf_trace.o causes the
linker error:
ld: kernel/trace/bpf_trace.o:(.rodata+0x38): undefined reference to
`bpf_prog_test_run_tracing'
Add a __weak function in bpf_trace.c to handle this.
Fixes: da00d2f117 ("bpf: Add test ops for BPF_PROG_TYPE_TRACING")
Signed-off-by: KP Singh <kpsingh@google.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200305220127.29109-1-kpsingh@chromium.org
While well intentioned, checking CAP_MAC_ADMIN for attaching
BPF_MODIFY_RETURN tracing programs to "security_" functions is not
necessary as tracing BPF programs already require CAP_SYS_ADMIN.
Fixes: 6ba43b761c ("bpf: Attachment verification for BPF_MODIFY_RETURN")
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200305204955.31123-1-kpsingh@chromium.org
struct_ops map cannot support map_freeze. Otherwise, a struct_ops
cannot be unregistered from the subsystem.
Fixes: 85d33df357 ("bpf: Introduce BPF_MAP_TYPE_STRUCT_OPS")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200305013454.535397-1-kafai@fb.com
The current always succeed behavior in bpf_struct_ops_map_delete_elem()
is not ideal for userspace tool. It can be improved to return proper
error value.
If it is in TOBEFREE, it means unregistration has been already done
before but it is in progress and waiting for the subsystem to clear
the refcnt to zero, so -EINPROGRESS.
If it is INIT, it means the struct_ops has not been registered yet,
so -ENOENT.
Fixes: 85d33df357 ("bpf: Introduce BPF_MAP_TYPE_STRUCT_OPS")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200305013447.535326-1-kafai@fb.com
When experimenting with bpf_send_signal() helper in our production
environment (5.2 based), we experienced a deadlock in NMI mode:
#5 [ffffc9002219f770] queued_spin_lock_slowpath at ffffffff8110be24
#6 [ffffc9002219f770] _raw_spin_lock_irqsave at ffffffff81a43012
#7 [ffffc9002219f780] try_to_wake_up at ffffffff810e7ecd
#8 [ffffc9002219f7e0] signal_wake_up_state at ffffffff810c7b55
#9 [ffffc9002219f7f0] __send_signal at ffffffff810c8602
#10 [ffffc9002219f830] do_send_sig_info at ffffffff810ca31a
#11 [ffffc9002219f868] bpf_send_signal at ffffffff8119d227
#12 [ffffc9002219f988] bpf_overflow_handler at ffffffff811d4140
#13 [ffffc9002219f9e0] __perf_event_overflow at ffffffff811d68cf
#14 [ffffc9002219fa10] perf_swevent_overflow at ffffffff811d6a09
#15 [ffffc9002219fa38] ___perf_sw_event at ffffffff811e0f47
#16 [ffffc9002219fc30] __schedule at ffffffff81a3e04d
#17 [ffffc9002219fc90] schedule at ffffffff81a3e219
#18 [ffffc9002219fca0] futex_wait_queue_me at ffffffff8113d1b9
#19 [ffffc9002219fcd8] futex_wait at ffffffff8113e529
#20 [ffffc9002219fdf0] do_futex at ffffffff8113ffbc
#21 [ffffc9002219fec0] __x64_sys_futex at ffffffff81140d1c
#22 [ffffc9002219ff38] do_syscall_64 at ffffffff81002602
#23 [ffffc9002219ff50] entry_SYSCALL_64_after_hwframe at ffffffff81c00068
The above call stack is actually very similar to an issue
reported by Commit eac9153f2b ("bpf/stackmap: Fix deadlock with
rq_lock in bpf_get_stack()") by Song Liu. The only difference is
bpf_send_signal() helper instead of bpf_get_stack() helper.
The above deadlock is triggered with a perf_sw_event.
Similar to Commit eac9153f2b, the below almost identical reproducer
used tracepoint point sched/sched_switch so the issue can be easily caught.
/* stress_test.c */
#include <stdio.h>
#include <stdlib.h>
#include <sys/mman.h>
#include <pthread.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#define THREAD_COUNT 1000
char *filename;
void *worker(void *p)
{
void *ptr;
int fd;
char *pptr;
fd = open(filename, O_RDONLY);
if (fd < 0)
return NULL;
while (1) {
struct timespec ts = {0, 1000 + rand() % 2000};
ptr = mmap(NULL, 4096 * 64, PROT_READ, MAP_PRIVATE, fd, 0);
usleep(1);
if (ptr == MAP_FAILED) {
printf("failed to mmap\n");
break;
}
munmap(ptr, 4096 * 64);
usleep(1);
pptr = malloc(1);
usleep(1);
pptr[0] = 1;
usleep(1);
free(pptr);
usleep(1);
nanosleep(&ts, NULL);
}
close(fd);
return NULL;
}
int main(int argc, char *argv[])
{
void *ptr;
int i;
pthread_t threads[THREAD_COUNT];
if (argc < 2)
return 0;
filename = argv[1];
for (i = 0; i < THREAD_COUNT; i++) {
if (pthread_create(threads + i, NULL, worker, NULL)) {
fprintf(stderr, "Error creating thread\n");
return 0;
}
}
for (i = 0; i < THREAD_COUNT; i++)
pthread_join(threads[i], NULL);
return 0;
}
and the following command:
1. run `stress_test /bin/ls` in one windown
2. hack bcc trace.py with the following change:
--- a/tools/trace.py
+++ b/tools/trace.py
@@ -513,6 +513,7 @@ BPF_PERF_OUTPUT(%s);
__data.tgid = __tgid;
__data.pid = __pid;
bpf_get_current_comm(&__data.comm, sizeof(__data.comm));
+ bpf_send_signal(10);
%s
%s
%s.perf_submit(%s, &__data, sizeof(__data));
3. in a different window run
./trace.py -p $(pidof stress_test) t:sched:sched_switch
The deadlock can be reproduced in our production system.
Similar to Song's fix, the fix is to delay sending signal if
irqs is disabled to avoid deadlocks involving with rq_lock.
With this change, my above stress-test in our production system
won't cause deadlock any more.
I also implemented a scale-down version of reproducer in the
selftest (a subsequent commit). With latest bpf-next,
it complains for the following potential deadlock.
[ 32.832450] -> #1 (&p->pi_lock){-.-.}:
[ 32.833100] _raw_spin_lock_irqsave+0x44/0x80
[ 32.833696] task_rq_lock+0x2c/0xa0
[ 32.834182] task_sched_runtime+0x59/0xd0
[ 32.834721] thread_group_cputime+0x250/0x270
[ 32.835304] thread_group_cputime_adjusted+0x2e/0x70
[ 32.835959] do_task_stat+0x8a7/0xb80
[ 32.836461] proc_single_show+0x51/0xb0
...
[ 32.839512] -> #0 (&(&sighand->siglock)->rlock){....}:
[ 32.840275] __lock_acquire+0x1358/0x1a20
[ 32.840826] lock_acquire+0xc7/0x1d0
[ 32.841309] _raw_spin_lock_irqsave+0x44/0x80
[ 32.841916] __lock_task_sighand+0x79/0x160
[ 32.842465] do_send_sig_info+0x35/0x90
[ 32.842977] bpf_send_signal+0xa/0x10
[ 32.843464] bpf_prog_bc13ed9e4d3163e3_send_signal_tp_sched+0x465/0x1000
[ 32.844301] trace_call_bpf+0x115/0x270
[ 32.844809] perf_trace_run_bpf_submit+0x4a/0xc0
[ 32.845411] perf_trace_sched_switch+0x10f/0x180
[ 32.846014] __schedule+0x45d/0x880
[ 32.846483] schedule+0x5f/0xd0
...
[ 32.853148] Chain exists of:
[ 32.853148] &(&sighand->siglock)->rlock --> &p->pi_lock --> &rq->lock
[ 32.853148]
[ 32.854451] Possible unsafe locking scenario:
[ 32.854451]
[ 32.855173] CPU0 CPU1
[ 32.855745] ---- ----
[ 32.856278] lock(&rq->lock);
[ 32.856671] lock(&p->pi_lock);
[ 32.857332] lock(&rq->lock);
[ 32.857999] lock(&(&sighand->siglock)->rlock);
Deadlock happens on CPU0 when it tries to acquire &sighand->siglock
but it has been held by CPU1 and CPU1 tries to grab &rq->lock
and cannot get it.
This is not exactly the callstack in our production environment,
but sympotom is similar and both locks are using spin_lock_irqsave()
to acquire the lock, and both involves rq_lock. The fix to delay
sending signal when irq is disabled also fixed this issue.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200304191104.2796501-1-yhs@fb.com
There was a recent change in blktrace.c that added a RCU protection to
`q->blk_trace` in order to fix a use-after-free issue during access.
However the change missed an edge case that can lead to dereferencing of
`bt` pointer even when it's NULL:
Coverity static analyzer marked this as a FORWARD_NULL issue with CID
1460458.
```
/kernel/trace/blktrace.c: 1904 in sysfs_blk_trace_attr_store()
1898 ret = 0;
1899 if (bt == NULL)
1900 ret = blk_trace_setup_queue(q, bdev);
1901
1902 if (ret == 0) {
1903 if (attr == &dev_attr_act_mask)
>>> CID 1460458: Null pointer dereferences (FORWARD_NULL)
>>> Dereferencing null pointer "bt".
1904 bt->act_mask = value;
1905 else if (attr == &dev_attr_pid)
1906 bt->pid = value;
1907 else if (attr == &dev_attr_start_lba)
1908 bt->start_lba = value;
1909 else if (attr == &dev_attr_end_lba)
```
Added a reassignment with RCU annotation to fix the issue.
Fixes: c780e86dd4 ("blktrace: Protect q->blk_trace with RCU")
Cc: stable@vger.kernel.org
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Cengiz Can <cengiz@kernel.wtf>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The restriction introduced in 7a0df7fbc1 ("seccomp: Make NEW_LISTENER and
TSYNC flags exclusive") is mostly artificial: there is enough information
in a seccomp user notification to tell which thread triggered a
notification. The reason it was introduced is because TSYNC makes the
syscall return a thread-id on failure, and NEW_LISTENER returns an fd, and
there's no way to distinguish between these two cases (well, I suppose the
caller could check all fds it has, then do the syscall, and if the return
value was an fd that already existed, then it must be a thread id, but
bleh).
Matthew would like to use these two flags together in the Chrome sandbox
which wants to use TSYNC for video drivers and NEW_LISTENER to proxy
syscalls.
So, let's fix this ugliness by adding another flag, TSYNC_ESRCH, which
tells the kernel to just return -ESRCH on a TSYNC error. This way,
NEW_LISTENER (and any subsequent seccomp() commands that want to return
positive values) don't conflict with each other.
Suggested-by: Matthew Denton <mpdenton@google.com>
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Link: https://lore.kernel.org/r/20200304180517.23867-1-tycho@tycho.ws
Signed-off-by: Kees Cook <keescook@chromium.org>
The current fexit and fentry tests rely on a different program to
exercise the functions they attach to. Instead of doing this, implement
the test operations for tracing which will also be used for
BPF_MODIFY_RETURN in a subsequent patch.
Also, clean up the fexit test to use the generated skeleton.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200304191853.1529-7-kpsingh@chromium.org
- Allow BPF_MODIFY_RETURN attachment only to functions that are:
* Whitelisted for error injection by checking
within_error_injection_list. Similar discussions happened for the
bpf_override_return helper.
* security hooks, this is expected to be cleaned up with the LSM
changes after the KRSI patches introduce the LSM_HOOK macro:
https://lore.kernel.org/bpf/20200220175250.10795-1-kpsingh@chromium.org/
- The attachment is currently limited to functions that return an int.
This can be extended later other types (e.g. PTR).
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200304191853.1529-5-kpsingh@chromium.org
When multiple programs are attached, each program receives the return
value from the previous program on the stack and the last program
provides the return value to the attached function.
The fmod_ret bpf programs are run after the fentry programs and before
the fexit programs. The original function is only called if all the
fmod_ret programs return 0 to avoid any unintended side-effects. The
success value, i.e. 0 is not currently configurable but can be made so
where user-space can specify it at load time.
For example:
int func_to_be_attached(int a, int b)
{ <--- do_fentry
do_fmod_ret:
<update ret by calling fmod_ret>
if (ret != 0)
goto do_fexit;
original_function:
<side_effects_happen_here>
} <--- do_fexit
The fmod_ret program attached to this function can be defined as:
SEC("fmod_ret/func_to_be_attached")
int BPF_PROG(func_name, int a, int b, int ret)
{
// This will skip the original function logic.
return 1;
}
The first fmod_ret program is passed 0 in its return argument.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200304191853.1529-4-kpsingh@chromium.org
As we need to introduce a third type of attachment for trampolines, the
flattened signature of arch_prepare_bpf_trampoline gets even more
complicated.
Refactor the prog and count argument to arch_prepare_bpf_trampoline to
use bpf_tramp_progs to simplify the addition and accounting for new
attachment types.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200304191853.1529-2-kpsingh@chromium.org
Older (and maybe current) versions of systemd set release_agent to "" when
shutting down, but do not set notify_on_release to 0.
Since 64e90a8acb ("Introduce STATIC_USERMODEHELPER to mediate
call_usermodehelper()"), we filter out such calls when the user mode helper
path is "". However, when used in conjunction with an actual (i.e. non "")
STATIC_USERMODEHELPER, the path is never "", so the real usermode helper
will be called with argv[0] == "".
Let's avoid this by not invoking the release_agent when it is "".
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Signed-off-by: Tejun Heo <tj@kernel.org>
The return values of workqueue_init() and workqueue_early_int() are
always 0, and there is no usage of their return value. So just make
them return void.
Signed-off-by: Yu Chen <chen.yu@easystack.cn>
Signed-off-by: Tejun Heo <tj@kernel.org>
Similar to the commit d749534322 ("cgroup: fix incorrect
WARN_ON_ONCE() in cgroup_setup_root()"), cgroup_id(root_cgrp) does not
equal to 1 on 32bit ino archs which triggers all sorts of issues with
psi_show() on s390x. For example,
BUG: KASAN: slab-out-of-bounds in collect_percpu_times+0x2d0/
Read of size 4 at addr 000000001e0ce000 by task read_all/3667
collect_percpu_times+0x2d0/0x798
psi_show+0x7c/0x2a8
seq_read+0x2ac/0x830
vfs_read+0x92/0x150
ksys_read+0xe2/0x188
system_call+0xd8/0x2b4
Fix it by using cgroup_ino().
Fixes: 743210386c ("cgroup: use cgrp->kn->id as the cgroup ID")
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org # v5.5
The tick_periodic() function is used at the beginning part of the
bootup process for time keeping while the other clock sources are
being initialized.
The current code assumes that all the timer interrupts are handled in
a timely manner with no missing ticks. That is not actually true. Some
ticks are missed and there are some discrepancies between the tick time
(jiffies) and the timestamp reported in the kernel log. Some systems,
however, are more prone to missing ticks than the others. In the extreme
case, the discrepancy can actually cause a soft lockup message to be
printed by the watchdog kthread. For example, on a Cavium ThunderX2
Sabre arm64 system:
[ 25.496379] watchdog: BUG: soft lockup - CPU#14 stuck for 22s!
On that system, the missing ticks are especially prevalent during the
smp_init() phase of the boot process. With an instrumented kernel,
it was found that it took about 24s as reported by the timestamp for
the tick to accumulate 4s of time.
Investigation and bisection done by others seemed to point to the
commit 73f3816609 ("arm64: Advertise mitigation of Spectre-v2, or
lack thereof") as the culprit. It could also be a firmware issue as
new firmware was promised that would fix the issue.
To properly address this problem, stop assuming that there will be no
missing tick in tick_periodic(). Modify it to follow the example of
tick_do_update_jiffies64() by using another reference clock to check for
missing ticks. Since the watchdog timer uses running_clock(), it is used
here as the reference. With this applied, the soft lockup problem in the
affected arm64 system is gone and tick time tracks much more closely to the
timestamp time.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200207193929.27308-1-longman@redhat.com
do_div() does a 64-by-32 division at least on 32bit platforms, while the
divisor 'div' is explicitly casted to unsigned long, thus 64-bit on 64-bit
platforms.
The code already ensures that the divisor is less than 2^32. Hence the
proper cast type is u32.
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200130130851.29204-1-wenyang@linux.alibaba.com
While unlikely the divisor in scale64_check_overflow() could be >= 32bit in
scale64_check_overflow(). do_div() truncates the divisor to 32bit at least
on 32bit platforms.
Use div64_u64() instead to avoid the truncation to 32-bit.
[ tglx: Massaged changelog ]
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200120100523.45656-1-wenyang@linux.alibaba.com
The reasons why the extra posix_cpu_timers_exit_group() invocation has been
added are not entirely clear from the commit message. Today all that
posix_cpu_timers_exit_group() does is stop timers that are tracking the
task from firing. Every other operation on those timers is still allowed.
The practical implication of this is posix_cpu_timer_del() which could
not get the siglock after the thread group leader has exited (because
sighand == NULL) would be able to run successfully because the timer
was already dequeued.
With that locking issue fixed there is no point in disabling all of the
timers. So remove this ``tempoary'' hack.
Fixes: e0a7021710 ("posix-cpu-timers: workaround to suppress the problems with mt exec")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/87o8tityzs.fsf@x220.int.ebiederm.org
posix cpu timers do not handle the death of a process well.
This is most clearly seen when a multi-threaded process calls exec from a
thread that is not the leader of the thread group. The posix cpu timer code
continues to pin the old thread group leader and is unable to find the
siglock from there.
This results in posix_cpu_timer_del being unable to delete a timer,
posix_cpu_timer_set being unable to set a timer. Further to compensate for
the problems in posix_cpu_timer_del on a multi-threaded exec all timers
that point at the multi-threaded task are stopped.
The code for the timers fundamentally needs to check if the target
process/thread is alive. This needs an extra level of indirection. This
level of indirection is already available in struct pid.
So replace cpu.task with cpu.pid to get the needed extra layer of
indirection.
In addition to handling things more cleanly this reduces the amount of
memory a timer can pin when a process exits and then is reaped from
a task_struct to the vastly smaller struct pid.
Fixes: e0a7021710 ("posix-cpu-timers: workaround to suppress the problems with mt exec")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/87wo86tz6d.fsf@x220.int.ebiederm.org
The target_value field in struct pm_qos_constraints is used for
lockless access to the effective constraint value of a given QoS
list, so the readers of it cannot expect it to always reflect the
most recent effective constraint value. However, they can and do
expect it to be equal to a valid effective constraint value computed
at a certain time in the past (event though it may not be the most
recent one), so add READ|WRITE_ONCE() annotations around the
target_value accesses to prevent the compiler from possibly causing
that expectation to be unmet by generating code in an exceptionally
convoluted way.
Signed-off-by: Qian Cai <cai@lca.pw>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 567cd4da54 ("ring-buffer: User context bit recursion checking")
added the TRACE_BUFFER bits to be used in the current task's trace_recursion
field. But the final submission of the logic removed the use of those bits,
but never removed the bits themselves (they were never used in upstream
Linux). These can be safely removed.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The hwlat tracer runs a loop of width time during a given window. It then
reports the max latency over a given threshold and records a timestamp. But
this timestamp is the time after the width has finished, and not the time it
actually triggered.
Record the actual time when the latency was greater than the threshold as
well as the number of times it was greater in a given width per window.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The sysinfo() syscall includes uptime in seconds but has no correction for
time namespaces which makes it inconsistent with the /proc/uptime inside of
a time namespace.
Add the missing time namespace adjustment call.
Signed-off-by: Cyril Hrubis <chrubis@suse.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dmitry Safonov <dima@arista.com>
Link: https://lkml.kernel.org/r/20200303150638.7329-1-chrubis@suse.cz
Introduce bpf_link abstraction, representing an attachment of BPF program to
a BPF hook point (e.g., tracepoint, perf event, etc). bpf_link encapsulates
ownership of attached BPF program, reference counting of a link itself, when
reference from multiple anonymous inodes, as well as ensures that release
callback will be called from a process context, so that users can safely take
mutex locks and sleep.
Additionally, with a new abstraction it's now possible to generalize pinning
of a link object in BPF FS, allowing to explicitly prevent BPF program
detachment on process exit by pinning it in a BPF FS and let it open from
independent other process to keep working with it.
Convert two existing bpf_link-like objects (raw tracepoint and tracing BPF
program attachments) into utilizing bpf_link framework, making them pinnable
in BPF FS. More FD-based bpf_links will be added in follow up patches.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200303043159.323675-2-andriin@fb.com
As Peter pointed out, task_work() can avoid ->pi_lock and cmpxchg()
if task->task_works == NULL && !PF_EXITING.
And in fact the only reason why task_work_run() needs ->pi_lock is
the possible race with task_work_cancel(), we can optimize this code
and make the locking more clear.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull scheduler fix from Ingo Molnar:
"Fix a scheduler statistics bug"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix statistics for find_idlest_group()
The task has been already computed to take siglock before calling
arm_timer. So pass the benefit of that labor into arm_timer().
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/8736auvdt1.fsf@x220.int.ebiederm.org
As of e78c349679 ("time, signal: Protect resource use statistics
with seqlock") cpu_clock_sample_group no longers needs siglock
protection. Unfortunately no one realized it at the time.
Remove the extra locking that is for cpu_clock_sample_group and not
for cpu_clock_sample. This significantly simplifies the code.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/878skmvdts.fsf@x220.int.ebiederm.org
As of e78c349679 ("time, signal: Protect resource use statistics with
seqlock") cpu_clock_sample_group() no longer needs siglock protection so
remove the stale comment.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/87eeuevduq.fsf@x220.int.ebiederm.org
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-02-28
The following pull-request contains BPF updates for your *net-next* tree.
We've added 41 non-merge commits during the last 7 day(s) which contain
a total of 49 files changed, 1383 insertions(+), 499 deletions(-).
The main changes are:
1) BPF and Real-Time nicely co-exist.
2) bpftool feature improvements.
3) retrieve bpf_sk_storage via INET_DIAG.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Oleg wrote a very informative comment, but with the removal of
proc_cleanup_work it is no longer accurate.
Rewrite the comment so that it only talks about the details
that are still relevant, and hopefully is a little clearer.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
There remains no more code in the kernel using pids_ns->proc_mnt,
therefore remove it from the kernel.
The big benefit of this change is that one of the most error prone and
tricky parts of the pid namespace implementation, maintaining kernel
mounts of proc is removed.
In addition removing the unnecessary complexity of the kernel mount
fixes a regression that caused the proc mount options to be ignored.
Now that the initial mount of proc comes from userspace, those mount
options are again honored. This fixes Android's usage of the proc
hidepid option.
Reported-by: Alistair Strachan <astrachan@google.com>
Fixes: e94591d0d9 ("proc: Convert proc_mount to use mount_ns.")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Fix a recent cpufreq initialization regression (Rafael Wysocki),
revert a devfreq commit that made incompatible changes and broke
user land on some systems (Orson Zhai), drop a stale reference to
a document that has gone away recently (Jonathan Neuschäfer) and
fix a typo in a hibernation code comment (Alexandre Belloni).
-----BEGIN PGP SIGNATURE-----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=ySea
-----END PGP SIGNATURE-----
Merge tag 'pm-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Fix a recent cpufreq initialization regression (Rafael Wysocki),
revert a devfreq commit that made incompatible changes and broke user
land on some systems (Orson Zhai), drop a stale reference to a
document that has gone away recently (Jonathan Neuschäfer), and fix a
typo in a hibernation code comment (Alexandre Belloni)"
* tag 'pm-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: Fix policy initialization for internal governor drivers
Revert "PM / devfreq: Modify the device name as devfreq(X) for sysfs"
PM / hibernate: fix typo "reserverd_size" -> "reserved_size"
Documentation: power: Drop reference to interface.rst
This patch fixes the following sparse error:
kernel/exit.c:627:25: error: incompatible types in comparison expression
And the following warning:
kernel/exit.c:626:40: warning: incorrect type in assignment
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
[christian.brauner@ubuntu.com: edit commit message]
Link: https://lore.kernel.org/r/20200130062028.4870-1-madhuparnabhowmik10@gmail.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
* pm-sleep:
PM / hibernate: fix typo "reserverd_size" -> "reserved_size"
Documentation: power: Drop reference to interface.rst
* pm-devfreq:
Revert "PM / devfreq: Modify the device name as devfreq(X) for sysfs"
This patch adds INET_DIAG support to bpf_sk_storage.
1. Although this series adds bpf_sk_storage diag capability to inet sk,
bpf_sk_storage is in general applicable to all fullsock. Hence, the
bpf_sk_storage logic will operate on SK_DIAG_* nlattr. The caller
will pass in its specific nesting nlattr (e.g. INET_DIAG_*) as
the argument.
2. The request will be like:
INET_DIAG_REQ_SK_BPF_STORAGES (nla_nest) (defined in latter patch)
SK_DIAG_BPF_STORAGE_REQ_MAP_FD (nla_put_u32)
SK_DIAG_BPF_STORAGE_REQ_MAP_FD (nla_put_u32)
......
Considering there could have multiple bpf_sk_storages in a sk,
instead of reusing INET_DIAG_INFO ("ss -i"), the user can select
some specific bpf_sk_storage to dump by specifying an array of
SK_DIAG_BPF_STORAGE_REQ_MAP_FD.
If no SK_DIAG_BPF_STORAGE_REQ_MAP_FD is specified (i.e. an empty
INET_DIAG_REQ_SK_BPF_STORAGES), it will dump all bpf_sk_storages
of a sk.
3. The reply will be like:
INET_DIAG_BPF_SK_STORAGES (nla_nest) (defined in latter patch)
SK_DIAG_BPF_STORAGE (nla_nest)
SK_DIAG_BPF_STORAGE_MAP_ID (nla_put_u32)
SK_DIAG_BPF_STORAGE_MAP_VALUE (nla_reserve_64bit)
SK_DIAG_BPF_STORAGE (nla_nest)
SK_DIAG_BPF_STORAGE_MAP_ID (nla_put_u32)
SK_DIAG_BPF_STORAGE_MAP_VALUE (nla_reserve_64bit)
......
4. Unlike other INET_DIAG info of a sk which is pretty static, the size
required to dump the bpf_sk_storage(s) of a sk is dynamic as the
system adding more bpf_sk_storage_map. It is hard to set a static
min_dump_alloc size.
Hence, this series learns it at the runtime and adjust the
cb->min_dump_alloc as it iterates all sk(s) of a system. The
"unsigned int *res_diag_size" in bpf_sk_storage_diag_put()
is for this purpose.
The next patch will update the cb->min_dump_alloc as it
iterates the sk(s).
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200225230421.1975729-1-kafai@fb.com
The mptcp conflict was overlapping additions.
The SMC conflict was an additional and removal happening at the same
time.
Signed-off-by: David S. Miller <davem@davemloft.net>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200227001744.GA3317@embeddedor
-----BEGIN PGP SIGNATURE-----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=DyVs
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20200226' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit fixes from Paul Moore:
"Two fixes for problems found by syzbot:
- Moving audit filter structure fields into a union caused some
problems in the code which populates that filter structure.
We keep the union (that idea is a good one), but we are fixing the
code so that it doesn't needlessly set fields in the union and mess
up the error handling.
- The audit_receive_msg() function wasn't validating user input as
well as it should in all cases, we add the necessary checks"
* tag 'audit-pr-20200226' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: always check the netlink payload length in audit_receive_msg()
audit: fix error handling in audit_data_to_entry()
sgs->group_weight is not set while gathering statistics in
update_sg_wakeup_stats(). This means that a group can be classified as
fully busy with 0 running tasks if utilization is high enough.
This path is mainly used for fork and exec.
Fixes: 57abff067a ("sched/fair: Rework find_idlest_group()")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Link: https://lore.kernel.org/r/20200218144534.4564-1-vincent.guittot@linaro.org
Change in API of bootconfig (before it comes live in a release)
- Have a magic value "BOOTCONFIG" in initrd to know a bootconfig exists
- Set CONFIG_BOOT_CONFIG to 'n' by default
- Show error if "bootconfig" on cmdline but not compiled in
- Prevent redefining the same value
- Have a way to append values
- Added a SELECT BLK_DEV_INITRD to fix a build failure
Synthetic event fixes:
- Switch to raw_smp_processor_id() for recording CPU value in preempt
section. (No care for what the value actually is)
- Fix samples always recording u64 values
- Fix endianess
- Check number of values matches number of fields
- Fix a printing bug
Fix of trace_printk() breaking postponed start up tests
Make a function static that is only used in a single file.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXlW4vxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qtioAP0WLEm3dWO0z3321h/a0DSshC+Bslu3
HDPTsGVGrXmvggEA/lr1ikRHd8PsO7zW8BfaZMxoXaTqXiuSrzEWxnMlFw0=
=O8PM
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing and bootconfig updates:
"Fixes and changes to bootconfig before it goes live in a release.
Change in API of bootconfig (before it comes live in a release):
- Have a magic value "BOOTCONFIG" in initrd to know a bootconfig
exists
- Set CONFIG_BOOT_CONFIG to 'n' by default
- Show error if "bootconfig" on cmdline but not compiled in
- Prevent redefining the same value
- Have a way to append values
- Added a SELECT BLK_DEV_INITRD to fix a build failure
Synthetic event fixes:
- Switch to raw_smp_processor_id() for recording CPU value in preempt
section. (No care for what the value actually is)
- Fix samples always recording u64 values
- Fix endianess
- Check number of values matches number of fields
- Fix a printing bug
Fix of trace_printk() breaking postponed start up tests
Make a function static that is only used in a single file"
* tag 'trace-v5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
bootconfig: Fix CONFIG_BOOTTIME_TRACING dependency issue
bootconfig: Add append value operator support
bootconfig: Prohibit re-defining value on same key
bootconfig: Print array as multiple commands for legacy command line
bootconfig: Reject subkey and value on same parent key
tools/bootconfig: Remove unneeded error message silencer
bootconfig: Add bootconfig magic word for indicating bootconfig explicitly
bootconfig: Set CONFIG_BOOT_CONFIG=n by default
tracing: Clear trace_state when starting trace
bootconfig: Mark boot_config_checksum() static
tracing: Disable trace_printk() on post poned tests
tracing: Have synthetic event test use raw_smp_processor_id()
tracing: Fix number printing bug in print_synth_event()
tracing: Check that number of vals matches number of synth event fields
tracing: Make synth_event trace functions endian-correct
tracing: Make sure synth_event_trace() example always uses u64
When queueing a signal, we increment both the users count of pending
signals (for RLIMIT_SIGPENDING tracking) and we increment the refcount
of the user struct itself (because we keep a reference to the user in
the signal structure in order to correctly account for it when freeing).
That turns out to be fairly expensive, because both of them are atomic
updates, and particularly under extreme signal handling pressure on big
machines, you can get a lot of cache contention on the user struct.
That can then cause horrid cacheline ping-pong when you do these
multiple accesses.
So change the reference counting to only pin the user for the _first_
pending signal, and to unpin it when the last pending signal is
dequeued. That means that when a user sees a lot of concurrent signal
queuing - which is the only situation when this matters - the only
atomic access needed is generally the 'sigpending' count update.
This was noticed because of a particularly odd timing artifact on a
dual-socket 96C/192T Cascade Lake platform: when you get into bad
contention, on that machine for some reason seems to be much worse when
the contention happens in the upper 32-byte half of the cacheline.
As a result, the kernel test robot will-it-scale 'signal1' benchmark had
an odd performance regression simply due to random alignment of the
'struct user_struct' (and pointed to a completely unrelated and
apparently nonsensical commit for the regression).
Avoiding the double increments (and decrements on the dequeueing side,
of course) makes for much less contention and hugely improved
performance on that will-it-scale microbenchmark.
Quoting Feng Tang:
"It makes a big difference, that the performance score is tripled! bump
from original 17000 to 54000. Also the gap between 5.0-rc6 and
5.0-rc6+Jiri's patch is reduced to around 2%"
[ The "2% gap" is the odd cacheline placement difference on that
platform: under the extreme contention case, the effect of which half
of the cacheline was hot was 5%, so with the reduced contention the
odd timing artifact is reduced too ]
It does help in the non-contended case too, but is not nearly as
noticeable.
Reported-and-tested-by: Feng Tang <feng.tang@intel.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Philip Li <philip.li@intel.com>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit d8a953ddde ("bootconfig: Set CONFIG_BOOT_CONFIG=n by
default") also changed the CONFIG_BOOTTIME_TRACING to select
CONFIG_BOOT_CONFIG to show the boot-time tracing on the menu,
it introduced wrong dependencies with BLK_DEV_INITRD as below.
WARNING: unmet direct dependencies detected for BOOT_CONFIG
Depends on [n]: BLK_DEV_INITRD [=n]
Selected by [y]:
- BOOTTIME_TRACING [=y] && TRACING_SUPPORT [=y] && FTRACE [=y] && TRACING [=y]
This makes the CONFIG_BOOT_CONFIG selects CONFIG_BLK_DEV_INITRD to
fix this error and make CONFIG_BOOTTIME_TRACING=n by default, so
that both boot-time tracing and boot configuration off but those
appear on the menu list.
Link: http://lkml.kernel.org/r/158264140162.23842.11237423518607465535.stgit@devnote2
Fixes: d8a953ddde ("bootconfig: Set CONFIG_BOOT_CONFIG=n by default")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Compiled-tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
KASAN is reporting that __blk_add_trace() has a use-after-free issue
when accessing q->blk_trace. Indeed the switching of block tracing (and
thus eventual freeing of q->blk_trace) is completely unsynchronized with
the currently running tracing and thus it can happen that the blk_trace
structure is being freed just while __blk_add_trace() works on it.
Protect accesses to q->blk_trace by RCU during tracing and make sure we
wait for the end of RCU grace period when shutting down tracing. Luckily
that is rare enough event that we can afford that. Note that postponing
the freeing of blk_trace to an RCU callback should better be avoided as
it could have unexpected user visible side-effects as debugfs files
would be still existing for a short while block tracing has been shut
down.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=205711
CC: stable@vger.kernel.org
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reported-by: Tristan Madani <tristmd@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In a RT kernel down_read_trylock() cannot be used from NMI context and
up_read_non_owner() is another problematic issue.
So in such a configuration, simply elide the annotated stackmap and
just report the raw IPs.
In the longer term, it might be possible to provide a atomic friendly
versions of the page cache traversal which will at least provide the info
if the pages are resident and don't need to be paged in.
[ tglx: Use IS_ENABLED() to avoid the #ifdeffery, fixup the irq work
callback and add a comment ]
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145644.708960317@linutronix.de
The LPM trie map cannot be used in contexts like perf, kprobes and tracing
as this map type dynamically allocates memory.
The memory allocation happens with a raw spinlock held which is a truly
spinning lock on a PREEMPT RT enabled kernel which disables preemption and
interrupts.
As RT does not allow memory allocation from such a section for various
reasons, convert the raw spinlock to a regular spinlock.
On a RT enabled kernel these locks are substituted by 'sleeping' spinlocks
which provide the proper protection but keep the code preemptible.
On a non-RT kernel regular spinlocks map to raw spinlocks, i.e. this does
not cause any functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145644.602129531@linutronix.de
PREEMPT_RT forbids certain operations like memory allocations (even with
GFP_ATOMIC) from atomic contexts. This is required because even with
GFP_ATOMIC the memory allocator calls into code pathes which acquire locks
with long held lock sections. To ensure the deterministic behaviour these
locks are regular spinlocks, which are converted to 'sleepable' spinlocks
on RT. The only true atomic contexts on an RT kernel are the low level
hardware handling, scheduling, low level interrupt handling, NMIs etc. None
of these contexts should ever do memory allocations.
As regular device interrupt handlers and soft interrupts are forced into
thread context, the existing code which does
spin_lock*(); alloc(GPF_ATOMIC); spin_unlock*();
just works.
In theory the BPF locks could be converted to regular spinlocks as well,
but the bucket locks and percpu_freelist locks can be taken from arbitrary
contexts (perf, kprobes, tracepoints) which are required to be atomic
contexts even on RT. These mechanisms require preallocated maps, so there
is no need to invoke memory allocations within the lock held sections.
BPF maps which need dynamic allocation are only used from (forced) thread
context on RT and can therefore use regular spinlocks which in turn allows
to invoke memory allocations from the lock held section.
To achieve this make the hash bucket lock a union of a raw and a regular
spinlock and initialize and lock/unlock either the raw spinlock for
preallocated maps or the regular variant for maps which require memory
allocations.
On a non RT kernel this distinction is neither possible nor required.
spinlock maps to raw_spinlock and the extra code and conditional is
optimized out by the compiler. No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145644.509685912@linutronix.de
As a preparation for making the BPF locking RT friendly, factor out the
hash bucket lock operations into inline functions. This allows to do the
necessary RT modification in one place instead of sprinkling it all over
the place. No functional change.
The now unused htab argument of the lock/unlock functions will be used in
the next step which adds PREEMPT_RT support.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145644.420416916@linutronix.de
The required protection is that the caller cannot be migrated to a
different CPU as these functions end up in places which take either a hash
bucket lock or might trigger a kprobe inside the memory allocator. Both
scenarios can lead to deadlocks. The deadlock prevention is per CPU by
incrementing a per CPU variable which temporarily blocks the invocation of
BPF programs from perf and kprobes.
Replace the open coded preempt_[dis|en]able and __this_cpu_[inc|dec] pairs
with the new helper functions. These functions are already prepared to make
BPF work on PREEMPT_RT enabled kernels. No functional change for !RT
kernels.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145644.317843926@linutronix.de
The required protection is that the caller cannot be migrated to a
different CPU as these places take either a hash bucket lock or might
trigger a kprobe inside the memory allocator. Both scenarios can lead to
deadlocks. The deadlock prevention is per CPU by incrementing a per CPU
variable which temporarily blocks the invocation of BPF programs from perf
and kprobes.
Replace the open coded preempt_disable/enable() and this_cpu_inc/dec()
pairs with the new recursion prevention helpers to prepare BPF to work on
PREEMPT_RT enabled kernels. On a non-RT kernel the migrate disable/enable
in the helpers map to preempt_disable/enable(), i.e. no functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145644.211208533@linutronix.de
Instead of preemption disable/enable to reflect the purpose. This allows
PREEMPT_RT to substitute it with an actual migration disable
implementation. On non RT kernels this is still mapped to
preempt_disable/enable().
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145643.891428873@linutronix.de
All of these cases are strictly of the form:
preempt_disable();
BPF_PROG_RUN(...);
preempt_enable();
Replace this with bpf_prog_run_pin_on_cpu() which wraps BPF_PROG_RUN()
with:
migrate_disable();
BPF_PROG_RUN(...);
migrate_enable();
On non RT enabled kernels this maps to preempt_disable/enable() and on RT
enabled kernels this solely prevents migration, which is sufficient as
there is no requirement to prevent reentrancy to any BPF program from a
preempting task. The only requirement is that the program stays on the same
CPU.
Therefore, this is a trivially correct transformation.
The seccomp loop does not need protection over the loop. It only needs
protection per BPF filter program
[ tglx: Converted to bpf_prog_run_pin_on_cpu() ]
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145643.691493094@linutronix.de
pcpu_freelist_populate() is disabling interrupts and then iterates over the
possible CPUs. The reason why this disables interrupts is to silence
lockdep because the invoked ___pcpu_freelist_push() takes spin locks.
Neither the interrupt disabling nor the locking are required in this
function because it's called during initialization and the resulting map is
not yet visible to anything.
Split out the actual push assignement into an inline, call it from the loop
and remove the interrupt disable.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145643.365930116@linutronix.de
If an element is freed via RCU then recursion into BPF instrumentation
functions is not a concern. The element is already detached from the map
and the RCU callback does not hold any locks on which a kprobe, perf event
or tracepoint attached BPF program could deadlock.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145643.259118710@linutronix.de
The BPF invocation from the perf event overflow handler does not require to
disable preemption because this is called from NMI or at least hard
interrupt context which is already non-preemptible.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145643.151953573@linutronix.de
Similar to __bpf_trace_run this is redundant because __bpf_trace_run() is
invoked from a trace point via __DO_TRACE() which already disables
preemption _before_ invoking any of the functions which are attached to a
trace point.
Remove it and add a cant_sleep() check.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145643.059995527@linutronix.de
