Extends support to IPv6 for Inline TLS server.
Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com>
v1->v2:
- cc'd tcp folks.
v2->v3:
- changed EXPORT_SYMBOL() to EXPORT_SYMBOL_GPL()
Signed-off-by: David S. Miller <davem@davemloft.net>
Ayush Sawal says:
====================
Fixing compilation warnings and errors
Patch 1: Fixes the warnings seen when compiling using sparse tool.
Patch 2: Fixes a cocci check error introduced after commit
567be3a5d2 ("crypto: chelsio -
Use multiple txq/rxq per tfm to process the requests").
V1->V2
patch1: Avoid type casting by using get_unaligned_be32() and
put_unaligned_be16/32() functions.
patch2: Modified subject of the patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes an error observed after running coccinile check.
drivers/crypto/chelsio/chcr_algo.c:1462:5-8: Unneeded variable:
"err". Return "0" on line 1480
This line is missed in the commit 567be3a5d2 ("crypto:
chelsio - Use multiple txq/rxq per tfm to process the requests").
Fixes: 567be3a5d2 ("crypto:
chelsio - Use multiple txq/rxq per tfm to process the requests").
V1->V2
-Modified subject.
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes the compilation warnings displayed by sparse tool for
chcr driver.
V1->V2
Avoid type casting by using get_unaligned_be32() and
put_unaligned_be16/32() functions.
The key which comes from stack is an u8 byte stream so we store it in
an unsigned char array(ablkctx->key). The function get_aes_decrypt_key()
is a used to calculate the reverse round key for decryption, for this
operation the key has to be divided into 4 bytes, so to extract 4 bytes
from an u8 byte stream and store it in an u32 variable, get_aligned_be32()
is used. Similarly for copying back the key from u32 variable to the
original u8 key stream, put_aligned_be32() is used.
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Error messages seen while building kernel with CONFIG_IPV6
disabled.
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current design enables ktls setting from start, which is not
efficient. Now the feature will be enabled when user demands
TLS offload on any interface.
v1->v2:
- taking ULD module refcount till any single connection exists.
- taking rtnl_lock() before clearing tls_devops.
v2->v3:
- cxgb4 is now registering to tlsdev_ops.
- module refcount inc/dec in chcr.
- refcount is only for connections.
- removed new code from cxgb_set_feature().
v3->v4:
- fixed warning message.
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Socket option IPV6_ADDRFORM supports UDP/UDPLITE and TCP at present.
Previously the checking logic looks like:
if (sk->sk_protocol == IPPROTO_UDP || sk->sk_protocol == IPPROTO_UDPLITE)
do_some_check;
else if (sk->sk_protocol != IPPROTO_TCP)
break;
After commit b6f6118901 ("ipv6: restrict IPV6_ADDRFORM operation"), TCP
was blocked as the logic changed to:
if (sk->sk_protocol == IPPROTO_UDP || sk->sk_protocol == IPPROTO_UDPLITE)
do_some_check;
else if (sk->sk_protocol == IPPROTO_TCP)
do_some_check;
break;
else
break;
Then after commit 82c9ae4408 ("ipv6: fix restrict IPV6_ADDRFORM operation")
UDP/UDPLITE were blocked as the logic changed to:
if (sk->sk_protocol == IPPROTO_UDP || sk->sk_protocol == IPPROTO_UDPLITE)
do_some_check;
if (sk->sk_protocol == IPPROTO_TCP)
do_some_check;
if (sk->sk_protocol != IPPROTO_TCP)
break;
Fix it by using Eric's code and simply remove the break in TCP check, which
looks like:
if (sk->sk_protocol == IPPROTO_UDP || sk->sk_protocol == IPPROTO_UDPLITE)
do_some_check;
else if (sk->sk_protocol == IPPROTO_TCP)
do_some_check;
else
break;
Fixes: 82c9ae4408 ("ipv6: fix restrict IPV6_ADDRFORM operation")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tipc_sendstream() may send zero length packet, then tipc_msg_append()
do not alloc skb, skb_peek_tail() will get NULL, msg_set_ack_required
will trigger NULL pointer dereference.
Reported-by: syzbot+8eac6d030e7807c21d32@syzkaller.appspotmail.com
Fixes: 0a3e060f34 ("tipc: add test for Nagle algorithm effectiveness")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Newer C compilers are complaining about the fact that there are no
function prototypes in sja1105_vl.c for the non-static functions.
Give them what they want.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Kirsher says:
====================
100GbE Intel Wired LAN Driver Updates 2020-05-31
This series contains updates to the ice driver only.
Brett modifies the driver to allow users to clear a VF's
administratively set MAC address on the PF. Fixes the driver to
recognize an existing VLAN tag when DMAC/SMAC is enabled in a packet.
Fixes an issue, so that VF's are reset after any VF port VLAN
modifications are made on the PF. Made sure the register QRXFLXP_CNTXT
is cleared before writing a new value to ensure the previous value is
not passed forward. Updates the PF to allow the VF to request a reset
as soon as it has been initialized. Fixes an issue to ensure when a VSI
is created, it uses the current coalesce value, not the default value.
Paul allows untrusted VF's to add 16 filters.
Dan increases the timeout needed after a PFR to allow ample time for
package download.
Chinh adjust the define value for the number of PHY speeds we currently
support. Changes the driver to ignore EMODE error when configuring the
PHY.
Jesse fixes an issue which was preventing a user from configuring the
interface before bringing it up.
Henry fixes the logic for adding back perfect flows after flow director
filter does a deletion.
Bruce fixes line wrappings to make it more consistent.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
fix dereference of nexthop group in fdb nexthop group
update validation path.
Fixes: 1274e1cc42 ("vxlan: ecmp support for mac fdb entries")
Reported-by: Ido Schimmel <idosch@idosch.org>
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Ciornei says:
====================
dpaa2-eth: add PFC support
This patch set adds support for Priority Flow Control in DPAA2 Ethernet
devices.
The first patch make the necessary changes so that multiple
traffic classes are configured. The dequeue priority
of the maximum 8 traffic classes is configured to be equal.
The second patch adds a static distribution to said traffic
classes based on the VLAN PCP field. In the future, this could be
extended through the .setapp() DCB callback for dynamic configuration.
Also, add support for the congestion group taildrop mechanism that
allows us to control the number of frames that can accumulate on a group
of Rx frame queues belonging to the same traffic class.
The basic subset of the DCB ops is implemented so that the user can
query the number of PFC capable traffic classes, their state and
reconfigure them if necessary.
Changes in v3:
- add patches 6-7 which add the PFC functionality
- patch 2/7: revert to explicitly cast mask to u16 * to not get into
sparse warnings
Changes in v4:
- really fix the sparse warnings in 2/7
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Leave congestion group taildrop enabled for all traffic classes
when PFC is enabled. Notification threshold is low enough such
that it will be hit first and this also ensures that FQs on
traffic classes which are not PFC enabled won't drain the buffer
pool.
FQ taildrop threshold is kept disabled as long as any form of
flow control is on. Since FQ taildrop works with bytes, not number
of frames, we can't guarantee it will not interfere with the
congestion notification mechanism for all frame sizes.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support in dpaa2-eth for PFC (Priority Flow Control)
through the DCB ops.
Instruct the hardware to respond to received PFC frames.
Current firmware doesn't allow us to selectively enable PFC
on the Rx side for some priorities only, so we will react to
all incoming PFC frames (and stop transmitting on the traffic
classes specified in the frame).
Also, configure the hardware to generate PFC frames based on Rx
congestion notifications. When a certain number of frames accumulate in
the ingress queues corresponding to a traffic class, priority flow
control frames are generated for that TC.
The number of PFC traffic classes available can be queried through
lldptool. Also, which of those traffic classes have PFC enabled is also
controlled through the same dcbnl_rtnl_ops callbacks.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that we have congestion group taildrop configured at all
times, we can afford to increase the frame queue taildrop
threshold; this will ensure a better response when receiving
bursts of large-sized frames.
Also decouple the buffer pool count from the Rx FQ taildrop
threshold, as above change would increase it too much. Instead,
keep the old count as a hardcoded value.
With the new limits, we try to ensure that:
* we allow enough leeway for large frame bursts (by buffering
enough of them in queues to avoid heavy dropping in case of
bursty traffic, but when overall ingress bandwidth is manageable)
* allow pending frames to be evenly spread between ingress FQs,
regardless of frame size
* avoid dropping frames due to the buffer pool being empty; this
is not a bad behaviour per se, but system overall response is
more linear and predictable when frames are dropped at frame
queue/group level.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The increase in number of ingress frame queues means we now risk
depleting the buffer pool before the FQ taildrop kicks in.
Congestion group taildrop allows us to control the number of frames that
can accumulate on a group of Rx frame queues belonging to the same
traffic class. This setting coexists with the frame queue based
taildrop: whichever limit gets hit first triggers the frame drop.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add convenient helper functions that determines whether Rx/Tx pause
frames are enabled based on link state flags received from firmware.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Configure static ingress classification based on VLAN PCP field.
If the DPNI doesn't have enough traffic classes to accommodate all
priority levels, the lowest ones end up on TC 0 (default on miss).
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The firmware reserves for each DPNI a number of RX frame queues
equal to the number of configured flows x number of configured
traffic classes.
Current driver configuration directs all incoming traffic to
FQs corresponding to TC0, leaving all other priority levels unused.
Start adding support for multiple ingress traffic classes, by
configuring the FQs associated with all priority levels, not just
TC0. All settings that are per-TC, such as those related to
hashing and flow steering, are also updated.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't export __bcm_phy_enable_rdb_access() and
__bcm_phy_enable_legacy_access() functions. They aren't used outside this
module and it was forgotten to provide a prototype for these functions.
Just make them static for now.
Fixes: 11ecf8c55b ("net: phy: broadcom: add cable test support")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tun in IFF_NAPI_FRAGS mode calls napi_gro_frags. Unlike netif_rx and
netif_gro_receive, this expects skb->data to point to the mac layer.
But skb_probe_transport_header, __skb_get_hash_symmetric, and
xdp_do_generic in tun_get_user need skb->data to point to the network
header. Flow dissection also needs skb->protocol set, so
eth_type_trans has to be called.
Ensure the link layer header lies in linear as eth_type_trans pulls
ETH_HLEN. Then take the same code paths for frags as for not frags.
Push the link layer header back just before calling napi_gro_frags.
By pulling up to ETH_HLEN from frag0 into linear, this disables the
frag0 optimization in the special case when IFF_NAPI_FRAGS is used
with zero length iov[0] (and thus empty skb->linear).
Fixes: 90e33d4594 ("tun: enable napi_gro_frags() for TUN/TAP driver")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Petar Penkov <ppenkov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Compiling with W=1 gives the following warning:
net/sched/cls_flower.c:731:1: warning: ‘mpls_opts_policy’ defined but not used [-Wunused-const-variable=]
The TCA_FLOWER_KEY_MPLS_OPTS contains a list of
TCA_FLOWER_KEY_MPLS_OPTS_LSE. Therefore, the attributes all have the
same type and we can't parse the list with nla_parse*() and have the
attributes validated automatically using an nla_policy.
fl_set_key_mpls_opts() properly verifies that all attributes in the
list are TCA_FLOWER_KEY_MPLS_OPTS_LSE. Then fl_set_key_mpls_lse()
uses nla_parse_nested() on all these attributes, thus verifying that
they have the NLA_F_NESTED flag. So we can safely drop the
mpls_opts_policy.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur says:
====================
bridge: mrp: Add support for MRA role
This patch series extends the MRP with the MRA role.
A node that has the MRA role can behave as a MRM or as a MRC. In case there are
multiple nodes in the topology that has the MRA role then only one node can
behave as MRM and all the others need to be have as MRC. The node that has the
higher priority(lower value) will behave as MRM.
A node that has the MRA role and behaves as MRC, it just needs to forward the
MRP_Test frames between the ring ports but also it needs to detect in case it
stops receiving MRP_Test frames. In that case it would try to behave as MRM.
v2:
- add new patch that fixes sparse warnings
- fix parsing of prio attribute
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
A node that has the MRA role, it can behave as MRM or MRC.
Initially it starts as MRM and sends MRP_Test frames on both ring ports.
If it detects that there are MRP_Test send by another MRM, then it
checks if these frames have a lower priority than itself. In this case
it would send MRP_Nack frames to notify the other node that it needs to
stop sending MRP_Test frames.
If it receives a MRP_Nack frame then it stops sending MRP_Test frames
and starts to behave as a MRC but it would continue to monitor the
MRP_Test frames send by MRM. If at a point the MRM stops to send
MRP_Test frames it would get the MRM role and start to send MRP_Test
frames.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Each MRP instance has a priority, a lower value means a higher priority.
The priority of MRP instance is stored in MRP_Test frame in this way
all the MRP nodes in the ring can see other nodes priority.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace u16/u32 with be16/be32 in the MRP frame types.
This fixes sparse warnings like:
warning: cast to restricted __be16
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The value adapter->rss_conf is stored in DMA memory, and it is assigned
to rssConf, so rssConf->indTableSize can be modified at anytime by
malicious hardware. Because rssConf->indTableSize is assigned to n,
buffer overflow may occur when the code "rssConf->indTable[n]" is
executed.
To fix this possible bug, n is checked after being used.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The fl_flow_key structure is around 500 bytes, so having two of them
on the stack in one function now exceeds the warning limit after an
otherwise correct change:
net/sched/cls_flower.c:298:12: error: stack frame size of 1056 bytes in function 'fl_classify' [-Werror,-Wframe-larger-than=]
I suspect the fl_classify function could be reworked to only have one
of them on the stack and modify it in place, but I could not work out
how to do that.
As a somewhat hacky workaround, move one of them into an out-of-line
function to reduce its scope. This does not necessarily reduce the stack
usage of the outer function, but at least the second copy is removed
from the stack during most of it and does not add up to whatever is
called from there.
I now see 552 bytes of stack usage for fl_classify(), plus 528 bytes
for fl_mask_lookup().
Fixes: 58cff782cc ("flow_dissector: Parse multiple MPLS Label Stack Entries")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Microchip lan7431 is frequently connected to a phy. However, it
can also be directly connected to a MII remote peer without
any phy in between. For supporting such a phyless hardware setup
in Linux we utilized phylib, which supports a fixed-link
configuration via the device tree. And we added support for
defining the connection type R/GMII in the device tree.
New behavior:
-------------
. The automatic speed and duplex detection of the lan743x silicon
between mac and phy is disabled. Instead phylib is used like in
other typical Linux drivers. The usage of phylib allows to
specify fixed-link parameters in the device tree.
. The device tree entry phy-connection-type is supported now with
the modes RGMII or (G)MII (default).
Development state:
------------------
. Tested with fixed-phy configurations. Not yet tested in normal
configurations with phy. Microchip kindly offered testing
as soon as the Corona measures allow this.
. All review findings of Andrew Lunn are included
Example:
--------
&pcie {
status = "okay";
host@0 {
reg = <0 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ethernet@0 {
compatible = "weyland-yutani,noscom1", "microchip,lan743x";
status = "okay";
reg = <0 0 0 0 0>;
phy-connection-type = "rgmii";
fixed-link {
speed = <100>;
full-duplex;
};
};
};
};
Signed-off-by: Roelof Berg <rberg@berg-solutions.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel says:
====================
devlink: Add support for control packet traps
So far device drivers were only able to register drop and exception
packet traps with devlink. These traps are used for packets that were
either dropped by the underlying device or encountered an exception
(e.g., missing neighbour entry) during forwarding.
However, in the steady state, the majority of the packets being trapped
to the CPU are packets that are required for the correct functioning of
the control plane. For example, ARP request and IGMP query packets.
This patch set allows device drivers to register such control traps with
devlink and expose their default control plane policy to user space.
User space can then tune the packet trap policer settings according to
its needs, as with existing packet traps.
In a similar fashion to exception traps, the action associated with such
traps cannot be changed as it can easily break the control plane. Unlike
drop and exception traps, packets trapped via control traps are not
reported to the kernel's drop monitor as they are not indicative of any
problem.
Patch set overview:
Patches #1-#3 break out layer 3 exceptions to a different group to
provide better granularity. A future patch set will make this completely
configurable.
Patch #4 adds a new trap action ('mirror') that is used for packets that
are forwarded by the device and sent to the CPU. Such packets are marked
by device drivers with 'skb->offload_fwd_mark = 1' in order to prevent
the kernel from forwarding them again.
Patch #5 adds the new trap type, 'control'.
Patches #6-#8 gradually add various control traps to devlink with proper
documentation.
Patch #9 adds a few control traps to netdevsim, which are automatically
exercised by existing devlink-trap selftest.
Patches #10 performs small refactoring in mlxsw.
Patches #11-#13 change mlxsw to register its existing control traps with
devlink.
Patch #14 adds a selftest over mlxsw that exercises all the registered
control traps.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Generate packets matching the various control traps and check that the
traps' stats increase accordingly.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In a similar fashion to other control traps, register ACL control traps
with devlink.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In a similar fashion to layer 2 control traps, register layer 3 control
traps with devlink.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In a similar fashion to other traps, register layer 2 control traps with
devlink.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We currently have an Rx listener function for exception traps that marks
received skbs with 'offload_fwd_mark' and injects them to the kernel's
Rx path. The marking is done because all these exceptions occur during
L3 forwarding, after the packets were potentially flooded at L2.
A subsequent patch will add support for control traps. Packets received
via some of these control traps need different handling:
1. Packets might not need to be marked with 'offload_fwd_mark'. For
example, if packet was trapped before L2 forwarding
2. Packets might not need to be injected to the kernel's Rx path. For
example, sampled packets are reported to user space via the psample
module
Factor out a common Rx listener function that only reports trapped
packets to devlink. Call it from mlxsw_sp_rx_no_mark_listener() and
mlxsw_sp_rx_mark_listener() that will inject the packets to the kernel's
Rx path, without and with the marking, respectively.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Register two control traps with devlink. The existing selftest at
tools/testing/selftests/drivers/net/netdevsim/devlink_trap.sh iterates
over all registered traps and checks that the action of non-drop traps
cannot be changed. Up until now only exception traps were tested, now
control traps will be tested as well.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add packet traps for packets that are sampled / trapped by ACLs, so that
capable drivers could register them with devlink. Add documentation for
every added packet trap and packet trap group.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add layer 3 control packet traps such as ARP and DHCP, so that capable
device drivers could register them with devlink. Add documentation for
every added packet trap and packet trap group.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add layer 2 control packet traps such as STP and IGMP query, so that
capable device drivers could register them with devlink. Add
documentation for every added packet trap and packet trap group.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This type is used for traps that trap control packets such as ARP
request and IGMP query to the CPU.
Do not report such packets to the kernel's drop monitor as they were not
dropped by the device no encountered an exception during forwarding.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The action is used by control traps such as IGMP query. The packet is
flooded by the device, but also trapped to the CPU in order for the
software bridge to mark the receiving port as a multicast router port.
Such packets are marked with 'skb->offload_fwd_mark = 1' in order to
prevent the software bridge from flooding them again.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The layer 3 exceptions are still subject to the same trap policer, so
nothing changes, but user space can choose to assign a different one.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The layer 3 exceptions are still subject to the same trap policer, so
nothing changes, but user space can choose to assign a different one.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Packets that hit exceptions during layer 3 forwarding must be trapped to
the CPU for the control plane to function properly. Create a dedicated
group for them, so that user space could choose to assign a different
policer for them.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next
to extend ctnetlink and the flowtable infrastructure:
1) Extend ctnetlink kernel side netlink dump filtering capabilities,
from Romain Bellan.
2) Generalise the flowtable hook parser to take a hook list.
3) Pass a hook list to the flowtable hook registration/unregistration.
4) Add a helper function to release the flowtable hook list.
5) Update the flowtable event notifier to pass a flowtable hook list.
6) Allow users to add new devices to an existing flowtables.
7) Allow users to remove devices to an existing flowtables.
8) Allow for registering a flowtable with no initial devices.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When enable clk_ref failed, clk_ptp should be disabled rather than
clk_ref itself.
Signed-off-by: Liu Xiang <liuxiang_1999@126.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The removal of mips_swiotlb_ops exposed a problem in octeon_mgmt Ethernet
driver. mips_swiotlb_ops had an mb() after most of the operations and the
removal of the ops had broken the receive functionality of the driver.
My code inspection has shown no other places except
octeon_mgmt_rx_fill_ring() where an explicit barrier would be obviously
missing. The latter function however has to make sure that "ringing the
bell" doesn't happen before RX ring entry is really written.
The patch has been successfully tested on Octeon II.
Fixes: a999933db9 ("MIPS: remove mips_swiotlb_ops")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
the indirect flow_block infrastructure, revisited
This series fixes b5140a36da ("netfilter: flowtable: add indr block
setup support") that adds support for the indirect block for the
flowtable. This patch crashes the kernel with the TC CT action.
[ 630.908086] BUG: kernel NULL pointer dereference, address: 00000000000000f0
[ 630.908233] #PF: error_code(0x0000) - not-present page
[ 630.908304] PGD 800000104addd067 P4D 800000104addd067 PUD 104311d067 PMD 0
[ 630.908380] Oops: 0000 [#1] SMP PTI [ 630.908615] RIP: 0010:nf_flow_table_indr_block_cb+0xc0/0x190 [nf_flow_table]
[ 630.908690] Code: 5b 41 5c 41 5d 41 5e 41 5f 5d c3 4c 89 75 a0 4c 89 65 a8 4d 89 ee 49 89 dd 4c 89 fe 48 c7 c7 b7 64 36 a0 31 c0 e8 ce ed d8 e0 <49> 8b b7 f0 00 00 00 48 c7 c7 c8 64 36 a0 31 c0 e8 b9 ed d8 e0 49[ 630.908790] RSP: 0018:ffffc9000895f8c0 EFLAGS: 00010246
[...]
[ 630.910774] Call Trace:
[ 630.911192] ? mlx5e_rep_indr_setup_block+0x270/0x270 [mlx5_core]
[ 630.911621] ? mlx5e_rep_indr_setup_block+0x270/0x270 [mlx5_core]
[ 630.912040] ? mlx5e_rep_indr_setup_block+0x270/0x270 [mlx5_core]
[ 630.912443] flow_block_cmd+0x51/0x80
[ 630.912844] __flow_indr_block_cb_register+0x26c/0x510
[ 630.913265] mlx5e_nic_rep_netdevice_event+0x9e/0x110 [mlx5_core]
[ 630.913665] notifier_call_chain+0x53/0xa0
[ 630.914063] raw_notifier_call_chain+0x16/0x20
[ 630.914466] call_netdevice_notifiers_info+0x39/0x90
[ 630.914859] register_netdevice+0x484/0x550
[ 630.915256] __ip_tunnel_create+0x12b/0x1f0 [ip_tunnel]
[ 630.915661] ip_tunnel_init_net+0x116/0x180 [ip_tunnel]
[ 630.916062] ipgre_tap_init_net+0x22/0x30 [ip_gre]
[ 630.916458] ops_init+0x44/0x110
[ 630.916851] register_pernet_operations+0x112/0x200
A workaround patch to cure this crash has been proposed. However, there
is another problem: The indirect flow_block still does not work for the
new TC CT action. The problem is that the existing flow_indr_block_entry
callback assumes you can look up for the flowtable from the netdevice to
get the flow_block. This flow_block allows you to offload the flows via
TC_SETUP_CLSFLOWER. Unfortunately, it is not possible to get the
flow_block from the TC CT flowtables because they are _not_ bound to any
specific netdevice.
= What is the indirect flow_block infrastructure?
The indirect flow_block infrastructure allows drivers to offload
tc/netfilter rules that belong to software tunnel netdevices, e.g.
vxlan.
This indirect flow_block infrastructure relates tunnel netdevices with
drivers because there is no obvious way to relate these two things
from the control plane.
= How does the indirect flow_block work before this patchset?
Front-ends register the indirect block callback through
flow_indr_add_block_cb() if they support for offloading tunnel
netdevices.
== Setting up an indirect block
1) Drivers track tunnel netdevices via NETDEV_{REGISTER,UNREGISTER} events.
If there is a new tunnel netdevice that the driver can offload, then the
driver invokes __flow_indr_block_cb_register() with the new tunnel
netdevice and the driver callback. The __flow_indr_block_cb_register()
call iterates over the list of the front-end callbacks.
2) The front-end callback sets up the flow_block_offload structure and it
invokes the driver callback to set up the flow_block.
3) The driver callback now registers the flow_block structure and it
returns the flow_block back to the front-end.
4) The front-end gets the flow_block object and it is now ready to
offload rules for this tunnel netdevice.
A simplified callgraph is represented below.
Front-end Driver
NETDEV_REGISTER
|
__flow_indr_block_cb_register(netdev, cb_priv, driver_cb)
| [1]
.--------------frontend_indr_block_cb(cb_priv, driver_cb)
|
.
setup_flow_block_offload(bo)
| [2]
driver_cb(bo, cb_priv) -----------.
|
\/
set up flow_blocks [3]
|
add rules to flow_block <----------
TC_SETUP_CLSFLOWER [4]
== Releasing the indirect flow_block
There are two possibilities, either tunnel netdevice is removed or
a netdevice (port representor) is removed.
=== Tunnel netdevice is removed
Driver waits for the NETDEV_UNREGISTER event that announces the tunnel
netdevice removal. Then, it calls __flow_indr_block_cb_unregister() to
remove the flow_block and rules. Callgraph is very similar to the one
described above.
=== Netdevice is removed (port representor)
Driver calls __flow_indr_block_cb_unregister() to remove the existing
netfilter/tc rule that belong to the tunnel netdevice.
= How does the indirect flow_block work after this patchset?
Drivers register the indirect flow_block setup callback through
flow_indr_dev_register() if they support for offloading tunnel
netdevices.
== Setting up an indirect flow_block
1) Frontends check if dev->netdev_ops->ndo_setup_tc is unset. If so,
frontends call flow_indr_dev_setup_offload(). This call invokes
the drivers' indirect flow_block setup callback.
2) The indirect flow_block setup callback sets up a flow_block structure
which relates the tunnel netdevice and the driver.
3) The front-end uses flow_block and offload the rules.
Note that the operational to set up (non-indirect) flow_block is very
similar.
== Releasing the indirect flow_block
=== Tunnel netdevice is removed
This calls flow_indr_dev_setup_offload() to set down the flow_block and
remove the offloaded rules. This alternate path is exercised if
dev->netdev_ops->ndo_setup_tc is unset.
=== Netdevice is removed (port representor)
If a netdevice is removed, then it might need to to clean up the
offloaded tc/netfilter rules that belongs to the tunnel netdevice:
1) The driver invokes flow_indr_dev_unregister() when a netdevice is
removed.
2) This call iterates over the existing indirect flow_blocks
and it invokes the cleanup callback to let the front-end remove the
tc/netfilter rules. The cleanup callback already provides the
flow_block that the front-end needs to clean up.
Front-end Driver
|
flow_indr_dev_unregister(...)
|
iterate over list of indirect flow_block
and invoke cleanup callback
|
.-----------------------------
|
.
frontend_flow_block_cleanup(flow_block)
.
|
\/
remove rules to flow_block
TC_SETUP_CLSFLOWER
= About this patchset
This patchset aims to address the existing TC CT problem while
simplifying the indirect flow_block infrastructure. Saving 300 LoC in
the flow_offload core and the drivers. The operational gets aligned with
the (non-indirect) flow_blocks logic. Patchset is composed of:
Patch #1 add nf_flow_table_gc_cleanup() which is required by the
netfilter's flowtable new indirect flow_block approach.
Patch #2 adds the flow_block_indr object which is actually part of
of the flow_block object. This stores the indirect flow_block
metadata such as the tunnel netdevice owner and the cleanup
callback (in case the tunnel netdevice goes away).
This patch adds flow_indr_dev_{un}register() to allow drivers
to offer netdevice tunnel hardware offload to the front-ends.
Then, front-ends call flow_indr_dev_setup_offload() to invoke
the drivers to set up the (indirect) flow_block.
Patch #3 add the tcf_block_offload_init() helper function, this is
a preparation patch to adapt the tc front-end to use this
new indirect flow_block infrastructure.
Patch #4 updates the tc and netfilter front-ends to use the new
indirect flow_block infrastructure.
Patch #5 updates the mlx5 driver to use the new indirect flow_block
infrastructure.
Patch #6 updates the nfp driver to use the new indirect flow_block
infrastructure.
Patch #7 updates the bnxt driver to use the new indirect flow_block
infrastructure.
Patch #8 removes the indirect flow_block infrastructure version 1,
now that frontends and drivers have been translated to
version 2 (coming in this patchset).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Drivers do not register to netdev events to set up indirect blocks
anymore. Remove __flow_indr_block_cb_register() and
__flow_indr_block_cb_unregister().
The frontends set up the callbacks through flow_indr_dev_setup_block()
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
