With CONFIG_PM enabled do not call genpd->power_on manually as this
will cause the regulators being turned on once in SCPSYS probe and
then again when the genpd core turns on the domains. Instead, call
genpd->power_on only with CONFIG_PM disabled and tell the genpd core
that the domains are disabled when registered.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
SCPSYS can't be built as module. Use builtin_platform_driver instead.
For this probe must not be __init and the data accessed can't be
__initconst. Remove this macros. To make the impact as small as possible,
fold scp_domain_data into scp_domain via a pointer.
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Reported-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Tested-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Since STAUPD interrupts aren't handled on mt8173, disable watchdog timeout
monitor of STAUPD to avoid WDT_INT triggered by STAUPD.
Signed-off-by: Henry Chen <henryc.chen@mediatek.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Sometimes PMIC is too busy to send data in time to cause pmic wrap timeout,
because pmic wrap is waiting for FSM_VLDCLR after finishing WACS2_CMD. It
just return error when issue happened, so the state machine will stay on
FSM_VLDCLR state when data send back later by PMIC and timeout again in next
time because pmic wrap waiting for FSM_IDLE state at the beginning of the
read/write function.
Clear the vldclr when timeout if state machine stay on FSM_VLDCLR.
Signed-off-by: Henry Chen <henryc.chen@mediatek.com>
Tested-by: Ricky Liang <jcliang@chromium.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add regulator support for scpsys driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABAgAGBQJWdxkqAAoJELQ5Ylss8dND1bMP/0KvyxO3PELRZ5VFVURapOGP
UjwhHw5MGxTwNIDN395DwCtjGq4dX7j5cGDGgXhmg+Me6Hhu4aWjD90hFffl5yov
Y0TQJeV2tQ7zJZ1vKReiFxFT/uUdC8vAya+fGKrIAAPDFWLHLXX6HRUInlHNMNmf
iZ0PPIHxwKmyNmClC8Qea7lwlBPD3qTawJfw0atFUdQbbdR/1Wi0Zu1SfKwDL969
evI6WmrvnCmYNY+kUQresaTXpWD7OmiyC8iIgqrVrd4FrVmYfGRwxP5DIMs4RUsH
28EhuxcSGPMz1H8rY5OEsMhwjWi6c/okzxK7JUjVUGydvaYBRnoWrTSCGKJqKZ3S
ySf2zTn7gQFRelvvdyi9iMZEm9aXpYkQRasY5ktMKlrBVTLfjpolPfhSewhBhY9h
2FN7WuWenLkyfx2/oZFJlrYpbvj0ecLMU7yYccG4/adiIec8VknbOTt2QCHIS8p3
qDLbzfekFOCU+C/jy2GX1CRclQE4L4icog1P5hHZ9j5FBY7LaclFLYF/jEUX6FFJ
7BFDLbzphwRrJGW5orxfOkiRJKth7uer7d1drMjaItDrAKJRkXSI4Cus8RPTx1lf
qxyVL+av9ceLWxMIVVneu+uzjssH8cGzWS7YeJa5fbJm/46v0IlmnptSwd82SHmN
fzwtYg2UYN5VKSC67eRa
=pz5g
-----END PGP SIGNATURE-----
Merge tag 'v4.4-next-soc' of https://github.com/mbgg/linux-mediatek into next/drivers
Change the scpsys to builtin_platform_driver_probe.
Add regulator support for scpsys driver.
* tag 'v4.4-next-soc' of https://github.com/mbgg/linux-mediatek:
drivers/soc: make mediatek/mtk-scpsys.c explicitly non-modular
soc: mediatek: SCPSYS: Add regulator support
Signed-off-by: Olof Johansson <olof@lixom.net>
The Kconfig currently controlling compilation of this code is:
drivers/soc/mediatek/Kconfig:config MTK_SCPSYS
drivers/soc/mediatek/Kconfig: bool "MediaTek SCPSYS Support"
...meaning that it currently is not being built as a module by anyone.
Lets remove the couple traces of modularity so that when reading the
driver there is no doubt it is builtin-only.
Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Daniel Kurtz <djkurtz@chromium.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The power domains are supplied by regulators. Add support for them so
that the regulators are properly turned on before a domain is powered up
and turned off when a domain is powered down.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
If enable Mediatek 8173 SoC, it should also enable power domain
driver. Otherwise access clk subsystem register will fail.
Signed-off-by: Eddie Huang <eddie.huang@mediatek.com>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>
In kernel late init, it turns off all unused clocks, which
needs to access subsystem registers such as VENC and VENC_LT.
Accessing MT8173 VENC registers needs two top clocks, mm_sel and
venc_sel. Accessing VENC_LT registers needs mm_sel and venclt_sel.
So we need to keep these clocks on before accessing their registers.
This patch keeps venc_sel / venclt_sel clock on when
VENC / VENC_LT's power is on, to prevent system hang up while
accessing its registeres.
Signed-off-by: James Liao <jamesjj.liao@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Register gpd_dev_ops.active_wakeup function to support keep power
during suspend state. And add flag to each power domain to
decide whether keep power during suspend or not.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Eddie Huang <eddie.huang@mediatek.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The watchdog may not be initialized by the bootloader, even if the rest
of the pwrap is. Move the watchdog initialization out of pwrap_init() to
make sure the watchdog is always initialized and not only when the pwrap
is uninitialized.
Signed-off-by: Henry Chen <henryc.chen@mediatek.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
SCPSYS driver misses the module.h include which makes it fail
when compiling with allmodconf.
This patch fixes this.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
platform_driver does not need to set an owner because
platform_driver_register() will set it.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This adds a power domain driver for the Mediatek SCPSYS unit.
The System Control Processor System (SCPSYS) has several power
management related tasks in the system. The tasks include thermal
measurement, dynamic voltage frequency scaling (DVFS), interrupt
filter and lowlevel sleep control. The System Power Manager (SPM)
inside the SCPSYS is for the MTCMOS power domain control.
For now this driver only adds power domain support, the more
advanced features are not yet supported. The driver implements
the generic PM domain device tree bindings, the first user will
most likely be the Mediatek AFE audio driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This adds support for some miscellaneous bits of the infracfg controller.
The mtk_infracfg_set/clear_bus_protection functions are necessary for
the scpsys power domain driver to handle the bus protection bits which
are contained in the infacfg register space.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The pmic-wrapper calls the reset controller. If CONFIG_RESET_CONTROLLER
is not set, compilation fails with:
drivers/soc/mediatek/mtk-pmic-wrap.c: In function ‘pwrap_probe’:
drivers/soc/mediatek/mtk-pmic-wrap.c:836:2: error: implicit declaration of function ‘devm_reset_control_get’ [-Werror=implicit-function-declaration]
This patch sets the dependency in the Kconfig file.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
When the PMIC wrapper state machine has read a register it goes into the
"wait for valid clear" (vldclr) state. The state machine stays in this
state until the VLDCLR bit is written to. We should write this bit after
reading a register because the SCPSYS won't let the system go into
suspend as long as the state machine waits for valid clear.
Since now we never leave the state machine in vldclr state we no longer
have to check for this state on pwrap_read/pwrap_write entry and can
remove the corresponding code.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
replace chipselect extension values based on SPI clock with hardcoded SoC
specific values.
The PMIC wrapper has the ability of extending the chipselects by configurable
amounts of time. We configured the values based on the rate of SPI clock, but
this is wrong. The delays should be configured based on the internal PMIC clock
that latches the values from the SPI bus to the internal PMIC registers. By
default this clock is 24MHz. Other clock frequencies are for debugging only
and can be removed from the driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The PMIC wrapper driver adds a couple of variables that are never used.
Remove them to avoid build warnings.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This adds support for the PMIC wrapper found on MediaTek MT8135 and
MT8173 SoCs. The PMIC wrapper is found on MT6xxx SoCs aswell but these
are currently not supported.
On MediaTek MT8135, MT8173 and other SoCs the PMIC is connected via
SPI. The SPI master interface is not directly visible to the CPU, but
only through the PMIC wrapper inside the SoC. The communication between
the SoC and the PMIC can optionally be encrypted. Also a non standard
Dual IO SPI mode can be used to increase speed. The MT8135 also supports
a special feature named "IP Pairing". With IP Pairing the pins of some
SoC internal peripherals can be on the PMIC. The signals of these pins
are routed over the SPI bus using the pwrap bridge. Because of these
optional non SPI conform features the PMIC driver is not implemented as
a SPI bus master driver.
Signed-off-by: Flora Fu, MediaTek
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
