Add crypto engine (CE) and CE BAM related nodes and definitions to
"sdm845.dtsi".
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Link: https://lore.kernel.org/r/20201119155233.3974286-6-thara.gopinath@linaro.org
[bjorn: Replaced RPMH_CE_CLK constant, for now]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Use GIC_SPI rather than 0 in the specifiers for the two ARM GIC
interrupts used by IPA.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20201126015457.6557-4-elder@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Use GIC_SPI rather than 0 in the specifiers for the two ARM GIC
interrupts used by IPA.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20201126015457.6557-3-elder@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Recently we learned that Android and Windows firmware don't seem to
like using 3 as an iommu mask value for IPA. A simple fix was to
specify exactly the streams needed explicitly, rather than implying
a range with the mask. Make the same change for the SC7180 platform.
See also:
https://lore.kernel.org/linux-arm-msm/20201123052305.157686-1-bjorn.andersson@linaro.org/
Fixes: d82fade846 ("arm64: dts: qcom: sc7180: add IPA information")
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20201126015457.6557-2-elder@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The trogdor design has two options for supplying the 'pp3300_hub' power
rail, it can be supplied by 'pp3300_l7c' or 'pp3300_a'. The 'pp3300_a'
path includes a load switch that can be controlled through GPIO84.
Initially trogdor boards used 'pp3300_l7c' to power the USB hub, newer
revisions (will) use 'pp3300_a' as supply for 'pp3300_hub'.
Add a DT node for the 'pp3300_a' path and a pinctrl entry for the GPIO.
Make this path the default and keep trogdor rev1, lazor rev0 and rev1
on 'pp3300_l7c'. These earlier revisions also allocated the GPIO to the
purpose of controlling the power switch, so there is no need to limit
the pinctrl config to newer revisions. Remove the platform-wide
'always/boot-on' properties from 'pp3300_l7c' and add them to the
boards that use this supply. Also delete the 'always/boot-on'
properties of 'pp3300_hub' for these boards.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20201124164714.v4.1.I0ed4abdd2b2916fbedf76be254bc3457fb8b9655@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add DDR/L3 bandwidth votes for the pro variant of SC7180 SoC, as it support
frequencies upto 2.5 GHz.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/1606198876-3515-2-git-send-email-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tweak the DDR/L3 bandwidth votes on the lite variant of the SC7180 SoC
since the gold cores only support frequencies upto 2.1 GHz.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/1606198876-3515-1-git-send-email-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Trogdor has a thermistor to monitor the temperature of the charger IC.
Add the ADC (monitor) nodes and a thermal zone for this thermistor.
Signed-off-by: Antony Wang <antony_wang@compal.corp-partner.google.com>
[mka: tweaked commit message]
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20201030084840.1.If389f211a8532b83095ff8c66ec181424440f8d6@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add ADC_TM peripheral definitions for PM6150 and PM6150L. Add
ADC peripheral definition for PM6150l, which is needed for ADC_TM.
Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org>
Link: https://lore.kernel.org/r/1602160825-10414-2-git-send-email-jprakash@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The Android and Windows firmware does not accept the use of 3 as a mask
to cover the IPA streams. But with 0x721 being related to WiFi and 0x723
being unsed the mapping can be reduced to just cover 0x720 and 0x722,
which is accepted.
Acked-by: Alex Elder <elder@linaro.org>
Tested-by: Alex Elder <elder@linaro.org>
Fixes: e9e89c45bf ("arm64: dts: sdm845: add IPA iommus property")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201123052305.157686-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Point the various remoteprocs of SM8150 MTP to a place with the platform
specific firmware.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201121055603.582281-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The SMMU that sits in front of the QUP needs to be programmed properly
so that the i2c geni driver can allocate DMA descriptors. Failure to do
this leads to faults when using devices such as an i2c touchscreen where
the transaction is larger than 32 bytes and we use a DMA buffer.
arm-smmu 15000000.iommu: Unexpected global fault, this could be serious
arm-smmu 15000000.iommu: GFSR 0x00000002, GFSYNR0 0x00000002, GFSYNR1 0x000006c0, GFSYNR2 0x00000000
Add the right SID and mask so this works.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Caleb Connolly <caleb@connolly.tech>
Tested-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
[bjorn: Define for second QUP as well, be more specific in sdm845.dtsi]
Link: https://lore.kernel.org/r/20201122034149.626045-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The uart2 node has been renamed, apply the change to sm8250-hdk dts too so
that serial output works.
Fixes: 91ed0e90fc ("arm64: dts: qcom: add sm8250 hdk dts")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20201123143538.14198-1-jonathan@marek.ca
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Commit 22337b9102 ("arm64: dts: qcom: sc7180: Changed polling mode
in Thermal-zones node") sets both 'polling-delay' and
'polling-delay-passive' to zero with the rationale that TSENS interrupts
are enabled. A TSENS interrupt fires when the temperature of a thermal
zone reaches a trip point, which makes regular polling below the passive
trip point temperature unnecessary. However the situation is different
when passive cooling is active, regular polling is still needed to
trigger a periodic evaluation of the thermal zone by the thermal governor.
Change 'polling-delay-passive' back to the original value of 250 ms.
Commit 2315ae70af ("arm64: dts: qcom: sc7180: Add gpu cooling
support") recently changed the value for the GPU thermal zones from
zero to 100 ms, also set it to 250 ms for uniformity. If some zones
really need different values these can be changed in dedicated patches.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Fixes: 22337b9102 ("arm64: dts: qcom: sc7180: Changed polling mode in Thermal-zones node")
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20201111120334.1.Ifc04ea235c3c370e3b21ec3b4d5dead83cc403b4@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Some versions of the firmware leave i2c gpios in a wrong state.
Add pinctrl that disables pin bias since external pull-up resistors
are present.
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Fixes: 1329c1ab07 ("arm64: dts: qcom: Add device tree for Samsung Galaxy A3U/A5U")
Signed-off-by: Nikita Travkin <nikitos.tr@gmail.com>
Link: https://lore.kernel.org/r/20201113175917.189123-6-nikitos.tr@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
L8150 uses aw2013 LED contriller for notification LED on the front
of the device. Add it to the device tree
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Nikita Travkin <nikitos.tr@gmail.com>
Link: https://lore.kernel.org/r/20201113175917.189123-5-nikitos.tr@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
L8150 uses SGM3785 Flash LED driver. It is similar to SGM3140 but
can also be controlled with PWM. Since SoC doesn't have PWM, add
led to the device tree using sgm3140 driver.
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Nikita Travkin <nikitos.tr@gmail.com>
Link: https://lore.kernel.org/r/20201113175917.189123-4-nikitos.tr@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
L8150 has RMI4 compatible Synaptics touchscreen on
blsp_i2c5. It is powered by fixed regulator. Add
both to the device tree.
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Nikita Travkin <nikitos.tr@gmail.com>
Link: https://lore.kernel.org/r/20201113175917.189123-2-nikitos.tr@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
L8150 has a vibrator connected to PM8916. Add it to the device tree.
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Nikita Travkin <nikitos.tr@gmail.com>
Link: https://lore.kernel.org/r/20201113175917.189123-1-nikitos.tr@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This patch wires up touchscreen support on Samsung Galaxy A3 2015.
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Michael Srba <Michael.Srba@seznam.cz>
Link: https://lore.kernel.org/r/20201115195058.27097-1-michael.srba@seznam.cz
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
There's a proximity sensor on Lazor devices, but only for LTE SKUs.
Enable it only on the Lazor LTE SKUs and also configure it properly so
it works.
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20201120183825.547310-1-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This interrupt has an external pull-up so we don't need to pull it up
again. Drop the internal pull here. Note I don't think this really
changes anything, just noticed while looking at this irq pin.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20201120200913.618274-1-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
RB5 makes use of the two USB controllers onboard. USB0 is connected
to the Type C port and USB1 is connected to USB3.1 HUB which exposes
following downstream ports:
* 2 Type A ports
* 2 HS/SS ports on the expansion connector
* USB to LAN device
Hence, enable these two controllers with the required PHYs.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200917082622.6823-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
RNG (Random Number Generator) in SM8250 features PRNG EE (Execution
Environment), hence add devicetree support for it.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200921065806.10928-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Qualcomm boards should define two compatible strings: one for board,
anoter one for SoC family. sm8250-mtp.dts lists just the board
compatible, which makes it incompatible with qcom.yaml schema.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 60378f1a17 ("arm64: dts: qcom: sm8250: Add sm8250 dts file")
Link: https://lore.kernel.org/r/20200930112133.2091505-1-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add support for uSD card on RB5 using the SDHC2 interface.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[DB: disabled 1.8V support to get SDHC to work]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201028190955.1264526-2-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add support for SDC2 which can be used to interface uSD card.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[DB: minor fixes: clocks, iommus, opps]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201028190955.1264526-1-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add initial HDK865 dts, based on sm8250-mtp, with a few changes.
Notably, regulator configs are changed a bit.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20200609194030.17756-9-jonathan@marek.ca
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add the apps_smmu node for sm8250.
For UFS, now that the kernel initializes the iommu, the stream mappings
set by the bootloader are cleared. Adding the iommus property is required
so that new mappings are created for UFS.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20200609194030.17756-5-jonathan@marek.ca
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add the apps_smmu node for sm8150.
For UFS, now that the kernel initializes the iommu, the stream mappings
set by the bootloader are cleared. Adding the iommus property is required
so that new mappings are created for UFS.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/20200609194030.17756-4-jonathan@marek.ca
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
After many years of struggle, commit fa2d0aa969 ("mmc: core: Allow
setting slot index via device tree alias") finally allows the use of
aliases to number SD/MMC slots. Let's do that for sc7180 SoCs so that
if eMMC and SD are both used they have consistent numbers across boots
and kernel changes.
Picking numbers can be tricky. Do we call these "1" and "2" to match
the name in documentation or "0" and "1" with the assertion that we
should always start at 0 and count up?
While the "start counting at 0" makes sense if there are not already
well-defined numbers for all sd/mmc controllers, in the case of sc7180
there _are_ well defined numbers. IMO it is less confusing to use
those and match the docs.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20201111073652.1.Ia5bccd9eab7d74ea1ea9a7780e3cdbf662f5a464@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
DMA controller binding describes the node name should be dma-controller
and not dma, so fix the node name
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201027164511.476312-10-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
DMA controller binding describes the node name should be dma-controller
and not dma, so fix the node name
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201027164511.476312-9-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
DMA controller binding describes the node name should be dma-controller
and not dma, so fix the node name
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201027164511.476312-8-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
DMA controller binding describes the node name should be dma-controller
and not dma, so fix the node name
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201027164511.476312-7-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
