2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-24 21:24:00 +08:00
Commit Graph

147 Commits

Author SHA1 Message Date
Stephen Rothwell
66ba135c5a powerpc: create kernel/setup.h
for functions defined by setup-common.c and used in setup_xx.c

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-09 11:35:26 +11:00
Paul Mackerras
fca5dcd483 powerpc: Simplify and clean up the xmon terminal I/O
This factors out the common bits of arch/powerpc/xmon/start_*.c into
a new nonstdio.c, and removes some stuff that was supposed to make
xmon's I/O routines somewhat stdio-like but was never used.

It also makes the parsing of the xmon= command line option common,
so that ppc32 can now use xmon={off,on,early} also.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08 22:55:08 +11:00
Paul Mackerras
3825ac0ee6 powerpc: Fix crash in early boot on some powermacs
Some powermac machines were crashing in the quiesce firmware call
in prom_init.c because we have just closed the OF stdin device;
notably my 1999 G3 powerbook does this.  To avoid this, don't
close the OF stdin device on powermacs.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08 22:48:08 +11:00
Anton Blanchard
570142ca37 [PATCH] ppc64: remove some direct xmon calls
Even though we can enable and disable xmon at runtime now, there are a
few places in the merge tree that call xmon and xmon_printf directly.

In the case below we call die() which will call xmon if it is enabled.

Also remove an unnecessary include of xmon.h in smp.c.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08 11:19:57 +11:00
Benjamin Herrenschmidt
21fe3301f1 [PATCH] ppc: fix a bunch of warnings
Building a PowerMac kernel with ARCH=powerpc causes a bunch of warnings,
this fixes some of them

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08 11:19:36 +11:00
Benjamin Herrenschmidt
7d49697ef9 [PATCH] ppc64: More U3 device-tree fixes
Some more U3 revisions have the missing "interrupts" property in U3,
this adds them to the fixup code in prom_init.c

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08 11:17:53 +11:00
Benjamin Herrenschmidt
183d020258 [PATCH] ppc64: SMU partition recovery
This patch adds the ability to the SMU driver to recover missing
calibration partitions from the SMU chip itself. It also adds some
dynamic mecanism to /proc/device-tree so that new properties are visible
to userland.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08 11:17:40 +11:00
Benjamin Herrenschmidt
4350147a81 [PATCH] ppc64: SMU based macs cpufreq support
CPU freq support using 970FX powertune facility for iMac G5 and SMU
based single CPU desktop.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08 11:17:34 +11:00
David Woodhouse
a82765b6ee [PATCH] powerpc: Fix ppc32 initrd
OK, the Fedora ppc32 and ppc64 kernels should both be arch/powerpc by
tomorrow. They're booting on G5, POWER5, and my powerbook. I'll test
pmac SMP and Pegasos later -- but pmac smp is known broken in arch/ppc
anyway, and I'll live with a potential Pegasos regression for now; it
wasn't supported officially in FC4 either.

I needed to fix ppc32 initrd -- we were never setting initrd_start.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-08 11:16:41 +11:00
Paul Mackerras
24bfb00123 Merge ../linux-2.6 2005-11-08 11:14:20 +11:00
Christoph Hellwig
481bed4542 [PATCH] consolidate sys_ptrace()
The sys_ptrace boilerplate code (everything outside the big switch
statement for the arch-specific requests) is shared by most architectures.
This patch moves it to kernel/ptrace.c and leaves the arch-specific code as
arch_ptrace.

Some architectures have a too different ptrace so we have to exclude them.
They continue to keep their implementations.  For sh64 I had to add a
sh64_ptrace wrapper because it does some initialization on the first call.
For um I removed an ifdefed SUBARCH_PTRACE_SPECIAL block, but
SUBARCH_PTRACE_SPECIAL isn't defined anywhere in the tree.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Paul Mackerras <paulus@samba.org>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-By: David Howells <dhowells@redhat.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:42 -08:00
Roland Dreier
b0f7b8bc57 [PATCH] ppc32: Add 440SPe support
Add support for the AMCC PowerPC 440SPe SoC, including PCI Express in root
port mode.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:26 -08:00
Olof Johansson
732ee21f28 [PATCH] POWERPC/PPC64: Fix CONFIG_SMP=n build for ppc64
Two CONFIG_SMP=n build fixes due to missing <asm/smp.h> includes.

Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:23 -08:00
Paul Mackerras
c613523455 Merge ../linux-2.6 2005-11-07 14:42:09 +11:00
Michael Ellerman
76032de898 [PATCH] powerpc: Make ppc_md.set_dabr non 64-bit specific
Define ppc_md.set_dabr for both 32 + 64 bit. Cleanup the implementation for
pSeries also, it was needlessly complex. Now we just do two firmware tests at
setup time, and use one of two functions, rather than using one function and
testing on every call.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-07 13:31:13 +11:00
Paul Mackerras
2249ca9d60 powerpc: Various UP build fixes
Mostly this involves adding #include <asm/smp.h>, since that defines
things like boot_cpuid[_phys] and [gs]et_hard_smp_processor_id, which
are SMP-related but still needed on UP.  This incorporates fixes
posted by Olof Johansson and Heikki Lindholm.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-07 13:18:13 +11:00
David Gibson
dcad47fc42 [PATCH] powerpc: Kill ppcdebug
The ancient ppcdebug/PPCDBG mechanism is now only used in two places.
First, in the hash setup code, one of the bits allows the size of the
hash table to be reduced by a factor of 8 - which would be better
accomplished with a command line option for that purpose.  The other
was a bunch of bus walking related messages in the iSeries code, which
would seem to be insufficient reason to keep the mechanism.

This patch removes the last traces of this mechanism.

Built and booted on iSeries and pSeries POWER5 LPAR (ARCH=powerpc).

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-07 12:37:45 +11:00
Benjamin Herrenschmidt
3c726f8dee [PATCH] ppc64: support 64k pages
Adds a new CONFIG_PPC_64K_PAGES which, when enabled, changes the kernel
base page size to 64K.  The resulting kernel still boots on any
hardware.  On current machines with 4K pages support only, the kernel
will maintain 16 "subpages" for each 64K page transparently.

Note that while real 64K capable HW has been tested, the current patch
will not enable it yet as such hardware is not released yet, and I'm
still verifying with the firmware architects the proper to get the
information from the newer hypervisors.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-06 16:56:47 -08:00
Linus Torvalds
602d4a7e2f Merge master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc-merge 2005-11-04 16:27:50 -08:00
Paul Mackerras
c51e3a417b powerpc: Fix vmlinux.lds.S for 32-bit
We can't currently use asm-ppc/page.h in vmlinux.lds.S, so until
we have a merged page.h, define PAGE_SIZE and KERNELBASE locally.
Also gets rid of some dynamic executable cruft that we had for
32-bit.  With -Ttext=$(KERNELBASE) this didn't cause any problem,
but when we changed to putting . = KERNELBASE in the vmlinux.lds.S
this cruft caused the text to get linked at 0xa0 instead of
0xc0000000.  Oops.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-05 10:36:59 +11:00
Paul Mackerras
5ad5707861 powerpc: Merge smp.c and smp.h
This also moves setup_cpu_maps to setup-common.c (calling it
smp_setup_cpu_maps) and uses it on both 32-bit and 64-bit.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-05 10:33:55 +11:00
Paul Mackerras
292a6c58e9 Merge branch 'for-paulus' of git://kernel/home/michael/src/work/ 2005-11-04 16:17:32 +11:00
Paul Mackerras
8ad200d7b7 powerpc: Merge smp-tbsync.c (the generic timebase sync routine)
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-04 13:28:58 +11:00
Michael Ellerman
dc3a9efb5e Merge with Paulus 2005-11-04 12:12:52 +11:00
Michael Ellerman
b8f510219e powerpc: Implement smp_release_cpus() in C not asm
There's no reason for smp_release_cpus() to be asm, and most people can make
more sense of C code. Add an extern declaration to smp.h and remove the custom
one in machine_kexec.c

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-04 12:09:42 +11:00
Stephen Rothwell
879168ee51 powerpc: move include/asm-ppc64/ppc32.h to arch/powerpc/kernel
It is only included by signal_32.c

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-03 16:03:28 +11:00
Stephen Rothwell
62f4f47da6 powerpc: move ppc64/kernel/signal.c to arch/powerpc
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-03 16:03:20 +11:00
Michael Ellerman
e19e4ab415 powerpc: Set entry point and text address in linker script
Currently we set the kernel entry point and the address of the text
section in the Makefile, using CONFIG_KERNEL_START.

But we've already got <asm/page.h> in the linker script, so we can just
use KERNELBASE directly. That means if we ever change KERNELBASE there's
one less place to change it.

And we can set the entry point with ENTRY().

There are zero differences from "readelf -a vmlinux" with or without this
patch.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 16:03:06 +11:00
Michael Ellerman
358c86fda0 powerpc: Make early debugging fit on 80 character terminal
There's some debugging in prom.c that wraps nastly on 80 character
terminals, reformat it to fit.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 15:39:09 +11:00
Michael Ellerman
cab0af98df powerpc: Make set_dabr() a ppc_md function
Move pSeries specific code in set_dabr() into a ppc_md function, this will
allow us to keep plpar_wrappers.h private to platforms/pseries.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2005-11-03 15:30:49 +11:00
Paul Mackerras
f4fcbbe9a7 powerpc: Merge remaining RTAS code
This moves rtas-proc.c and rtas_flash.c into arch/powerpc/kernel, since
cell wants them as well as pseries (and chrp can use rtas-proc.c too,
at least in principle).  rtas_fw.c is gone, with its bits moved into
rtas_flash.c and rtas.c.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-03 14:41:19 +11:00
Horms
ebd50e5001 [PATCH] audit_sysctl_exit can only be used with CONF_AUDIT_SYSCTL
This section of code calls .audit_syscal_exit, but is inside CONFIG_AUDIT,
so it will fail to build if CONFIG_AUDITSYSCALL is not defined.

After discussion with David Woodhouse, change the ifdef to
CONFIG_AUDITSYSCALL

Signed-off-by: Horms <horms@verge.net.au>
Acked-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-01 21:44:46 -08:00
Stephen Rothwell
aaf8a7a294 Merge iSeries include file move 2005-11-02 16:06:03 +11:00
Paul Mackerras
104dd65fef powerpc: clean up bug.h further
This simplifies the macros which are different between 32-bit and
64-bit.  It also fixes a couple of printks on the bug->line element,
which is now a long.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-02 15:19:47 +11:00
Paul Mackerras
bccfd58842 powerpc: Fix compile error with CONFIG_TAU=y
A couple of instances of "i" that needed to be changed to "cpu_id"
got missed in the merge, because they were in CONFIG_TAU code.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-02 15:06:22 +11:00
Kelly Daly
c43a55ff4e merge filename and modify references to iseries/lpar_map.h
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02 15:02:47 +11:00
Kelly Daly
8875ccfb7a merge filename and modify references to iseries/it_lp_queue.h
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02 14:13:34 +11:00
Kelly Daly
f218aab5cf merge filename and modify references to iseries/it_lp_naca.h
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02 13:51:41 +11:00
Kelly Daly
e45423eac2 merge filename and modify references to iseries/hv_lp_event.h
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02 12:08:31 +11:00
Kelly Daly
8021b8a776 merge filename and modify references to iseries/hv_call_xm.h
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02 11:41:12 +11:00
David Gibson
a0e60b2033 [PATCH] powerpc: Merge bitops.h
Here's a revised version.  This re-introduces the set_bits() function
from ppc64, which I removed because I thought it was unused (it exists
on no other arch).  In fact it is used in the powermac interrupt code
(but not on pSeries).

- We use LARXL/STCXL macros to generate the right (32 or 64 bit)
  instructions, similar to LDL/STL from ppc_asm.h, used in fpu.S

- ppc32 previously used a full "sync" barrier at the end of
  test_and_*_bit(), whereas ppc64 used an "isync".  The merged version
  uses "isync", since I believe that's sufficient.

- The ppc64 versions of then minix_*() bitmap functions have changed
  semantics.  Previously on ppc64, these functions were big-endian
  (that is bit 0 was the LSB in the first 64-bit, big-endian word).
  On ppc32 (and x86, for that matter, they were little-endian.  As far
  as I can tell, the big-endian usage was simply wrong - I guess
  no-one ever tried to use minixfs on ppc64.

- On ppc32 find_next_bit() and find_next_zero_bit() are no longer
  inline (they were already out-of-line on ppc64).

- For ppc64, sched_find_first_bit() has moved from mmu_context.h to
  the merged bitops.  What it was doing in mmu_context.h in the first
  place, I have no idea.

- The fls() function is now implemented using the cntlzw instruction
  on ppc64, instead of generic_fls(), as it already was on ppc32.

- For ARCH=ppc, this patch requires adding arch/powerpc/lib to the
  arch/ppc/Makefile.  This in turn requires some changes to
  arch/powerpc/lib/Makefile which didn't correctly handle ARCH=ppc.

Built and running on G5.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01 21:49:02 +11:00
Arnd Bergmann
e9add2eeb1 [PATCH] powerpc: move rtas_fw.c out of platforms/pseries
Cell uses the same code as pSeries for flashing the firmware
through rtas, so the implementation should not be part of
platforms/pseries.

Put it into arch/powerpc/kernel instead.

Signed-off-by: Arnd Bergmann <arndb@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01 21:02:59 +11:00
Arnd Bergmann
f3f66f599d [PATCH] powerpc: Rename BPA to Cell
The official name for BPA is now CBEA (Cell Broadband
Engine Architecture). This patch renames all occurences
of the term BPA to 'Cell' for easier recognition.

Signed-off-by: Arnd Bergmann <arndb@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01 21:02:44 +11:00
Stephen Rothwell
bec7c458b3 powerpc: make mem= work on iSeries again
By parsing the command line earlier, we can add the mem= value to the
flattened device tree and let the generic code sort out the memory limit
for us.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-01 14:34:30 +11:00
Paul Mackerras
734d652480 powerpc: apply recent changes to merged code
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-31 13:57:01 +11:00
Paul Mackerras
cf00a8d18b powerpc: Fix bug arising from having multiple memory_limit variables
We had a static memory_limit in prom.c, and then another one defined
in setup_64.c and used in numa.c, which resulted in the kernel crashing
when mem=xxx was given on the command line.  This puts the declaration
in system.h and the definition in mem.c.  This also moves the
definition of tce_alloc_start/end out of setup_64.c.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-31 13:07:02 +11:00
Paul Mackerras
5f6b5b973a powerpc: Fix time setting bug on 32-bit
This fixes a bug where settimeofday would set the wrong parameters
in do_gtod, resulting in gettimeofday returning a value about 4
hours after the correct time.  The bug was that we divided a
negative 64-bit value with do_div, which treated it as unsigned
and gave us a result that was approximately 1.8e10 too large
(since the divisor was 1e9).

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-30 22:55:52 +11:00
Paul Mackerras
c1c3a554a3 powerpc: 32-bit needs cur_cpu_spec exported too
Somehow we ended up with an #ifdef CONFIG_PPC64 around the export
of cur_cpu_spec, but raid6 as a module needs it on ppc32 as well
as ppc64.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29 22:08:55 +10:00
Olaf Hering
ea6526605a [PATCH] ppc64: remove duplicate local variable in set_preferred_console
remove duplicate local variable, saves 2 asm instructions.

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-29 15:23:08 +10:00
Paul Mackerras
f78541dcec powerpc: Merge xmon
The merged version follows the ppc64 version pretty closely mostly,
and in fact ARCH=ppc64 now uses the arch/powerpc/xmon version.
The main difference for ppc64 is that the 'p' command to call
show_state (which was always pretty dodgy) has been replaced by
the ppc32 'p' command, which calls a given procedure (so in fact
the old 'p' command behaviour can be achieved with 'p $show_state').

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 22:53:37 +10:00