Pull networking updates from David Miller:
"Reasonably busy this cycle, but perhaps not as busy as in the 4.12
merge window:
1) Several optimizations for UDP processing under high load from
Paolo Abeni.
2) Support pacing internally in TCP when using the sch_fq packet
scheduler for this is not practical. From Eric Dumazet.
3) Support mutliple filter chains per qdisc, from Jiri Pirko.
4) Move to 1ms TCP timestamp clock, from Eric Dumazet.
5) Add batch dequeueing to vhost_net, from Jason Wang.
6) Flesh out more completely SCTP checksum offload support, from
Davide Caratti.
7) More plumbing of extended netlink ACKs, from David Ahern, Pablo
Neira Ayuso, and Matthias Schiffer.
8) Add devlink support to nfp driver, from Simon Horman.
9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa
Prabhu.
10) Add stack depth tracking to BPF verifier and use this information
in the various eBPF JITs. From Alexei Starovoitov.
11) Support XDP on qed device VFs, from Yuval Mintz.
12) Introduce BPF PROG ID for better introspection of installed BPF
programs. From Martin KaFai Lau.
13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann.
14) For loads, allow narrower accesses in bpf verifier checking, from
Yonghong Song.
15) Support MIPS in the BPF selftests and samples infrastructure, the
MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David
Daney.
16) Support kernel based TLS, from Dave Watson and others.
17) Remove completely DST garbage collection, from Wei Wang.
18) Allow installing TCP MD5 rules using prefixes, from Ivan
Delalande.
19) Add XDP support to Intel i40e driver, from Björn Töpel
20) Add support for TC flower offload in nfp driver, from Simon
Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub
Kicinski, and Bert van Leeuwen.
21) IPSEC offloading support in mlx5, from Ilan Tayari.
22) Add HW PTP support to macb driver, from Rafal Ozieblo.
23) Networking refcount_t conversions, From Elena Reshetova.
24) Add sock_ops support to BPF, from Lawrence Brako. This is useful
for tuning the TCP sockopt settings of a group of applications,
currently via CGROUPs"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits)
net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap
dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap
cxgb4: Support for get_ts_info ethtool method
cxgb4: Add PTP Hardware Clock (PHC) support
cxgb4: time stamping interface for PTP
nfp: default to chained metadata prepend format
nfp: remove legacy MAC address lookup
nfp: improve order of interfaces in breakout mode
net: macb: remove extraneous return when MACB_EXT_DESC is defined
bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case
bpf: fix return in load_bpf_file
mpls: fix rtm policy in mpls_getroute
net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t
net, ax25: convert ax25_route.refcount from atomic_t to refcount_t
net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t
net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t
...
Trivial fix to spelling mistake in netdev_err error message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It seems like a historic accident that these return unsigned char *,
and in many places that means casts are required, more often than not.
Make these functions return void * and remove all the casts across
the tree, adding a (u8 *) cast only where the unsigned char pointer
was used directly, all done with the following spatch:
@@
expression SKB, LEN;
typedef u8;
identifier fn = { skb_push, __skb_push, skb_push_rcsum };
@@
- *(fn(SKB, LEN))
+ *(u8 *)fn(SKB, LEN)
@@
expression E, SKB, LEN;
identifier fn = { skb_push, __skb_push, skb_push_rcsum };
type T;
@@
- E = ((T *)(fn(SKB, LEN)))
+ E = fn(SKB, LEN)
@@
expression SKB, LEN;
identifier fn = { skb_push, __skb_push, skb_push_rcsum };
@@
- fn(SKB, LEN)[0]
+ *(u8 *)fn(SKB, LEN)
Note that the last part there converts from push(...)[0] to the
more idiomatic *(u8 *)push(...).
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A common pattern with skb_put() is to just want to memcpy()
some data into the new space, introduce skb_put_data() for
this.
An spatch similar to the one for skb_put_zero() converts many
of the places using it:
@@
identifier p, p2;
expression len, skb, data;
type t, t2;
@@
(
-p = skb_put(skb, len);
+p = skb_put_data(skb, data, len);
|
-p = (t)skb_put(skb, len);
+p = skb_put_data(skb, data, len);
)
(
p2 = (t2)p;
-memcpy(p2, data, len);
|
-memcpy(p, data, len);
)
@@
type t, t2;
identifier p, p2;
expression skb, data;
@@
t *p;
...
(
-p = skb_put(skb, sizeof(t));
+p = skb_put_data(skb, data, sizeof(t));
|
-p = (t *)skb_put(skb, sizeof(t));
+p = skb_put_data(skb, data, sizeof(t));
)
(
p2 = (t2)p;
-memcpy(p2, data, sizeof(*p));
|
-memcpy(p, data, sizeof(*p));
)
@@
expression skb, len, data;
@@
-memcpy(skb_put(skb, len), data, len);
+skb_put_data(skb, data, len);
(again, manually post-processed to retain some comments)
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change the config packet format used in handle_set_wfi_drv_handler()
to align the host driver with the new format used in the wilc firmware.
The change updates the format in which the host driver provides the
firmware with the drv_handler index and also uses two new
fields viz. "mode" and 'name" in the config packet along with this index
to directly provide details about the interface and its mode to the
firmware instead of having multiple if-else statements in the host driver
to decide which interface to configure.
This change requires users to move to the newer version of the wilc
firmware(14.02 or higher) available on the vendor tree on github or on the
linux-firmware project. The existing firmware files on the linux-firmware
project are very old and best not used.
Signed-off-by: Aditya Shankar <aditya.shankar@microchip.com>
Reviewed-by: Arend Van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a missing blank line issue reported by checkpatch.pl
Signed-off-by: Marko Stankovic <dartnorris@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Split struct definition across multiple line to fit in the 80 characters
limit
Signed-off-by: Vincent Siles <vincent.siles@provenrun.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Splitting function calls across multiple lines to fit in the 80
characters limit
Signed-off-by: Vincent Siles <vincent.siles@provenrun.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Splitting functions signature across several lines to fin in the
80 characters limit
Signed-off-by: Vincent Siles <vincent.siles@provenrun.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removing some '-' comments to fit in the 80 characters limit
Signed-off-by: Vincent Siles <vincent.siles@provenrun.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removing empty line at the end of the file
Signed-off-by: Vincent Siles <vincent.siles@provenrun.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This addresses the following sparse warnings:
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c:2006:51: warning: incorrect type in assignment (different base types)
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c:2006:51: expected unsigned short [unsigned] [assigned] [usertype] ht_capa_info
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c:2006:51: got restricted __le16 const [usertype] cap_info
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c:2011:52: warning: incorrect type in assignment (different base types)
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c:2011:52: expected unsigned short [unsigned] [assigned] [usertype] ht_ext_params
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c:2011:52: got restricted __le16 const [usertype] extended_ht_cap_info
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c:2012:51: warning: incorrect type in assignment (different base types)
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c:2012:51: expected unsigned int [unsigned] [assigned] [usertype] ht_tx_bf_cap
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c:2012:51: got restricted __le32 const [usertype] tx_BF_cap_info
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c:2078:51: warning: incorrect type in assignment (different base types)
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c:2078:51: expected unsigned short [unsigned] [assigned] [usertype] ht_capa_info
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c:2078:51: got restricted __le16 const [usertype] cap_info
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c:2083:52: warning: incorrect type in assignment (different base types)
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c:2083:52: expected unsigned short [unsigned] [assigned] [usertype] ht_ext_params
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c:2083:52: got restricted __le16 const [usertype] extended_ht_cap_info
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c:2084:51: warning: incorrect type in assignment (different base types)
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c:2084:51: expected unsigned int [unsigned] [assigned] [usertype] ht_tx_bf_cap
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c:2084:51: got restricted __le32 const [usertype] tx_BF_cap_info
This is not the first attempt to address this problem:
https://lkml.org/lkml/2017/3/7/808
First, the current code works because the final use of the
ht_capa values (in host_interface.c: WILC_HostIf_PackStaParam) packs them
into a buffer in little-endian format. Since this matches the byte-order of
struct ieee80211_ht_cap, all is seemingly well.
What the current code does not do, and what these warnings expose, is
clearly communicate what the fields in struct add_sta_param
represent -- values with a specific (little endian) byte order.
This will lead to problems if the values are ever actually used by the
host, and that host is not little endian.
The proposed change addresses this by embedding a
struct ieee80211_ht_cap into struct add_sta_param. When the values
are later packed out, the newly embedded struct is copied directly
into the outbound buffer. All 16 and 32 bit types are treated as
little endian and marked as such. Future use of the values by the
host would still require conversion, or sparse would flag them again.
The following items are required for this to be correct:
1. The data is not currently used by the host.
2. struct ieee80211_ht_cap is packed.
3. The packing of the fields matches the order in
struct ieee80211_ht_cap.
This is similar, I believe, to how the same data is handled in
marvell/mwifiex/11n.c.
Test-compiled/loaded against staging-next on x86_64
Test-compiled against staging-next for ARM.
Applied/built against staging-testing.
Testing consists of compilation for the above trees/targets, and a
sparse check, no functional testing.
Signed-off-by: Jason Litzinger <jlitzingerdev@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is the big staging tree update for 4.12-rc1. And it's a big one,
adding about 350k new lines of crap^Wcode, mostly all in a big dump of
media drivers from Intel. But there's other new drivers in here as
well, yet-another-wifi driver, new IIO drivers, and a new crypto
accelerator. We also deleted a bunch of stuff, mostly in patch
cleanups, but also the Android ION code has shrunk a lot, and the
Android low memory killer driver was finally deleted, much to the
celebration of the -mm developers.
All of these have been in linux-next with a few build issues that will
show up when you merge to your tree, I'll follow up with fixes for those
after this gets merged.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWQzzlQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylNMgCcD+GoaF/Ml7YnULRl2GG/526II78AnitZ8qjd
rPqeowMIewYu9fgckLUc
=7rzO
-----END PGP SIGNATURE-----
Merge tag 'staging-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO updates from Greg KH:
"Here is the big staging tree update for 4.12-rc1.
It's a big one, adding about 350k new lines of crap^Wcode, mostly all
in a big dump of media drivers from Intel. But there's other new
drivers in here as well, yet-another-wifi driver, new IIO drivers, and
a new crypto accelerator.
We also deleted a bunch of stuff, mostly in patch cleanups, but also
the Android ION code has shrunk a lot, and the Android low memory
killer driver was finally deleted, much to the celebration of the -mm
developers.
All of these have been in linux-next with a few build issues that will
show up when you merge to your tree"
Merge conflicts in the new rtl8723bs driver (due to the wifi changes
this merge window) handled as per linux-next, courtesy of Stephen
Rothwell.
* tag 'staging-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1182 commits)
staging: fsl-mc/dpio: add cpu <--> LE conversion for dpaa2_fd
staging: ks7010: remove line continuations in quoted strings
staging: vt6656: use tabs instead of spaces
staging: android: ion: Fix unnecessary initialization of static variable
staging: media: atomisp: fix range checking on clk_num
staging: media: atomisp: fix misspelled word in comment
staging: media: atomisp: kmap() can't fail
staging: atomisp: remove #ifdef for runtime PM functions
staging: atomisp: satm include directory is gone
atomisp: remove some more unused files
atomisp: remove hmm_load/store/clear indirections
atomisp: kill off mmgr_free
atomisp: clean up the hmm init/cleanup indirections
atomisp: handle allocation calls before init in the hmm layer
staging: fsl-dpaa2/eth: Add maintainer for Ethernet driver
staging: fsl-dpaa2/eth: Add TODO file
staging: fsl-dpaa2/eth: Add trace points
staging: fsl-dpaa2/eth: Add driver specific stats
staging: fsl-dpaa2/eth: Add ethtool support
staging: fsl-dpaa2/eth: Add Freescale DPAA2 Ethernet driver
...
Function dev_alloc_skb() will return a NULL pointer if there is no
enough memory. However, in function WILC_WFI_mon_xmit(), its return
value is used without validation. This may result in a bad memory access
bug. This patch fixes the bug.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead passing both flags, which can be NULL, and vif_params,
which are never NULL, move the flags into the vif_params and
use BIT(0), which is invalid from userspace, to indicate that
the flags were changed.
While updating all drivers, fix a small bug in wil6210 where
it was setting the flags to 0 instead of leaving them unchanged.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The strncasecmp of buff against the literal string RSSI
is using variable length which is zero. This should be instead
using the variable size instead. Also remove the redundant
variable length.
Detected by PVS-Studio, warning: V575
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The vif->idx value is always 0 for two interfaces.
wl->vif_num = 0;
loop {
...
vif->idx = wl->vif_num;
...
wl->vif_num = i;
....
i++;
...
}
At present, vif->idx is assigned the value of wl->vif_num
at the beginning of this block and device is initialized
based on this index value.
In the next iteration, wl->vif_num is still 0 as it is only updated
later but gets assigned to vif->idx in the beginning. This causes problems
later when we try to reference a particular interface and also while
configuring the firmware.
This patch moves the assignment to vif->idx from the beginning
of the block to after wl->vif_num is updated with latest value of i.
Fixes: commit 735bb39ca3 ("staging: wilc1000: simplify vif[i]->ndev accesses")
Cc: <stable@vger.kernel.org>
Signed-off-by: Aditya Shankar <aditya.shankar@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The configuration packet format has changed in the newer wilc
firmware versions 14.2 and up. This update ensures that the
firmware is initialized correctly by the host and configured
in the required mode.
Signed-off-by: Aditya Shankar <aditya.shankar@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ftrace can be used to trace functions. Removing function tracing using dev_dbg/info
Signed-off-by: Pushkar Jambhlekar <pushkar.iit@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dev_err: replacing hardcoded function name with '%s' and __func__
Signed-off-by: Pushkar Jambhlekar <pushkar.iit@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
GAS_INTIAL_REQ should be GAS_INITIAL_REQ.
GAS_INTIAL_RSP should be GAS_INITIAL_RSP.
Improves readability of code.
Signed-off-by: Dylan Leggio <dleggio1@binghamton.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pmkid data is meant be be copied to the previous item in the
pmkidlist, however the code is just copying the data to itself because
the src index into pmkidlist is the same as the dst index into pmkidlist.
Fix this with i + 1 instead of i.
Detected by CoverityScan,CID#13339465 ("Overlapping buffer in memory copy")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Correct misspelled variables: 'happended' to 'happened' to make the
code grammatically correct.
Signed-off-by: Tamara Diaconita <diaconita.tamara@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move declaration of variables to top of function to make the code more
readable.
Signed-off-by: Tamara Diaconita <diaconita.tamara@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Variable ip_addr is already declared as pointer to u8. Again explicit type
casting of ip_addr to u8, is not required. Hence this patch removes it
by using the following coccinelle script.
@@
type T;
T *ptr,p;
@@
(
- (T *)(&p)
+ &p
|
- (T *)ptr
+ ptr
|
- (T *)(ptr)
+ ptr
|
- (T)(p)
+ p
)
Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removing 6 continue statements from a while loop. The
continue statements are redundant here since control
already returns to the beginning of the loop upon exit
of any of the conditional blocks. Found using Coccinelle.
Signed-off-by: Tahia Khan <tahia.khan@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes checkpatch warning by renaming pu8Buffer to buffer
and u32Length to length in wilc_gnrl_info_received.
Signed-off-by: Tahia Khan <tahia.khan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes checkpatch warning by renaming pu8Buffer to buffer
and u32Length to length in wilc_network_info_received.
Signed-off-by: Tahia Khan <tahia.khan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes checkpatch warning by renaming pu8Buffer to buffer
and u32Length to length in wilc_scan_complete_received.
Signed-off-by: Tahia Khan <tahia.khan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the checkpatch issue:
CHECK: Logical continuations should be on the previous line.
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
function prototype argument should have an identifier name as reported
by checkpatch.pl.
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a sanity check that wid.val has been allocated, fixes a null
pointer deference on stamac when calling ether_add_copy.
Detected by CoverityScan, CID#1369537 ("Dereference null return value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The check for result < 0 is redundant because at that point result
is always zero, hence we can remove this check and the netdev_err
message.
Detected by CoverityScan, CID#1357147 ("Logically Dead Code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change name of str_rssi to rssi_history within the network_info
struct for clarity.
Signed-off-by: Tahia Khan <tahia.khan@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove Hungarian notation and camel casing from all tstrRSSI members'
names. Additionally, change type of u8Full to bool since it only takes
values 1 or 0.
Signed-off-by: Tahia Khan <tahia.khan@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename struct tstrRSSI to rssi_history_buffer for clarity
and to remove camel casing.
Signed-off-by: Tahia Khan <tahia.khan@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix typos and add the following to the scripts/spelling.txt:
deintializing||deinitializing
deintialize||deinitialize
deintialized||deinitialized
Link: http://lkml.kernel.org/r/1481573103-11329-28-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix a checkpatch.pl WARNING: line over 80 characters
Signed-off-by: Jacob Zachariah <jacob_z@yahoo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes checkpatch CHECK: Alignment should match open parenthesis
Signed-off-by: Scott Matheina <scott@matheina.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
