This patch just adds the capability for GFS2 to track which function
called gfs2_log_flush. This should make it easier to diagnose
problems based on the sequence of events found in the journals.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch adds a new structure called gfs2_log_header_v2 which is used
to store expanded fields into previously unused areas of the log headers
(i.e., this change is backwards compatible). Some of these are used for
debug purposes so we can backtrack when problems occur. Others are
reserved for future expansion.
This patch is based on a prototype from Steve Whitehouse.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Commit bdcf0a423e ("kernel: make groups_sort calling a responsibility
group_info allocators") appears to break nfsd rootsquash in a pretty
major way.
It adds a call to groups_sort() inside the loop that copies/squashes
gids, which means the valid gids are sorted along with the following
garbage. The net result is that the highest numbered valid gids are
replaced with any lower-valued garbage gids, possibly including 0.
We should sort only once, after filling in all the gids.
Fixes: bdcf0a423e ("kernel: make groups_sort calling a responsibility ...")
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Acked-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If fsck.f2fs changes crc, we have no way to recover some inode blocks by roll-
forward recovery. Let's relax the condition to recover them.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
__vfs_removexattr() transfers "NULL" value to the setxattr handler of
the f2fs filesystem in order to remove the extended attribute. But,
__f2fs_setxattr() just ignores the removal request when the value of
the extended attribute is already NULL. We have to remove the extended
attribute itself even if the value of that is already NULL.
We can reporduce this bug with the below:
1. touch file
2. setfattr -n "user.foo" file
3. setfattr -x "user.foo" file
4. getfattr -d file
> user.foo
Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: Youngjin Gil <youngjin.gil@samsung.com>
Tested-by: Hobin Woo <hobin.woo@samsung.com>
Tested-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Don't remain dirtied page cache in f2fs after shutdown, it can mitigate
memory pressure of whole system, in order to keep other modules working
properly.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Once filesystem shuts down, daemons like gc/discard thread should be
aware of it, and do exit, in addtion, drop all cached pending discard
commands and turn off real-time discard mode.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch makes f2fs_ioc_shutdown handling error case correctly.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch splits need_inplace_update to two functions:
a. should_update_inplace() includes all conditions that we must use IPU.
b. should_update_outplace() includes all conditions that we must use OPU.
So that, in f2fs_ioc_set_pin_file() and f2fs_defragment_range(), we can
use corresponding function to check whether we can trigger OPU/IPU or not.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fixes to update last_disk_size only when writing out page
successfully.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Use get_inline_xattr_addrs directly instead of F2FS_INLINE_XATTR_ADDRS.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch cleans up error path of fille_super to avoid unneeded
release step.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In commit 57864ae5ce ("f2fs: limit # of inmemory pages"), we have
limited memory footprint of all inmem pages with 20% of total memory,
otherwise, if we exceed the threshold, we will try to drop all inmem
pages to avoid excessive memory pressure resulting in performance
regression.
But in some unrelated error paths, we will also drop all inmem pages,
which should be wrong, fix it in this patch.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We have supported to get next page offset with valid mapping crossing
hole in f2fs_map_blocks, utilizing it to speed up defragment on sparse
file.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces a new ioctl F2FS_IOC_PRECACHE_EXTENTS to precache
extent info like ext4, in order to gain better performance during
triggering AIO by eliminating synchronous waiting of mapping info.
Referred commit: 7869a4a6c5 ("ext4: add support for extent pre-caching")
In addition, with newly added extent precache abilitiy, this patch add
to support FIEMAP_FLAG_CACHE in ->fiemap.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch gives a flag to disable GC on given file, which would be useful, when
user wants to keep its block map. It also conducts in-place-update for dontmove
file.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In orangefs_devreq_read, there is a loop which picks an op off the list
of pending ops. If the loop fails to find an op, there is nothing to
read, and it returns EAGAIN. If the op has been given up on, the loop
is restarted via a goto. The bug is that the variable which the found
op is written to is not reinitialized, so if there are no more eligible
ops on the list, the code runs again on the already handled op.
This is triggered by interrupting a process while the op is being copied
to the client-core. It's a fairly small window, but it's there.
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
set_op_state_purged can delete the op.
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is no other parent for device_list_add() except for
btrfs_scan_one_device(), which would set btrfs_fs_devices::total_devices
if device_list_add is successful and this can be done with in
device_list_add() itself.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 60999ca4b4 ("btrfs: make device scan less noisy")
adds return value 1 to device_list_add(), so that parent function can
call pr_info only when new device is added. Move the pr_info() part
into device_list_add() so that this function can be kept simple.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The btrfs_free_stale_devices() is updated to match for the given device
path and delete it. (It searches for only unmounted list of devices.)
Also drop the comment about different path being used for the same
device, since now we will have cli to clean any device that's not a
concern any more.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
No functional changes.
Rename btrfs_free_stale_devices() arg to skip_dev, so that it
reflects what that arg for.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This updates btrfs_free_stale_devices() helper function to delete all
unmouted devices, when arg is NULL.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Let the list iterator iterate further and find other stale
devices and delete it. This is in preparation to add support
for user land request-able stale devices cleanup. Also rename
btrfs_free_stale_device() to btrfs_free_stale_devices().
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is no need to check for btrfs_fs_devices::seeding when we
have checked for btrfs_fs_devices::opened, because we can't sprout
without its seed FS being opened.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
No functional changes, just makes the code more readable
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In order to debug subtle bugs around merge_extent_mapping(), perf probe
can be used to check the arguments, but sometimes merge_extent_mapping()
got inlined by compiler and couldn't be probed.
This is adding noinline attribute to merge_extent_mapping().
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is a subtle case, so in order to understand the problem, it'd be good
to know the content of existing and em when any error occurs.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This test case simulates the racy situation of dio write vs dio read,
and see if btrfs_get_extent() would return -EEXIST.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This test case simulates the racy situation of buffered write vs dio
read, and see if btrfs_get_extent() would return -EEXIST.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We've observed that btrfs_get_extent() and merge_extent_mapping() could
return -EEXIST in several cases, and they are caused by some racy
condition, e.g dio read vs dio write, which makes the problem very tricky
to reproduce.
This adds extent map selftests in order to simulate those racy situations.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
[ minor string adjustments ]
Signed-off-by: David Sterba <dsterba@suse.com>
These helpers are extent map specific, move them to extent_map.c.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is a prepare work for the following extent map selftest, which
runs tests against em merge logic.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This fixes a corner case that is caused by a race of dio write vs dio
read/write.
Here is how the race could happen.
Suppose that no extent map has been loaded into memory yet.
There is a file extent [0, 32K), two jobs are running concurrently
against it, t1 is doing dio write to [8K, 32K) and t2 is doing dio
read from [0, 4K) or [4K, 8K).
t1 goes ahead of t2 and splits em [0, 32K) to em [0K, 8K) and [8K 32K).
------------------------------------------------------
t1 t2
btrfs_get_blocks_direct() btrfs_get_blocks_direct()
-> btrfs_get_extent() -> btrfs_get_extent()
-> lookup_extent_mapping()
-> add_extent_mapping() -> lookup_extent_mapping()
# load [0, 32K)
-> btrfs_new_extent_direct()
-> btrfs_drop_extent_cache()
# split [0, 32K) and
# drop [8K, 32K)
-> add_extent_mapping()
# add [8K, 32K)
-> add_extent_mapping()
# handle -EEXIST when adding
# [0, 32K)
------------------------------------------------------
About how t2(dio read/write) runs into -EEXIST:
a) add_extent_mapping() gets -EEXIST for adding em [0, 32k),
b) search_extent_mapping() then returns [0, 8k) as the existing em,
even though start == existing->start, em is [0, 32k) so that
extent_map_end(em) > extent_map_end(existing), i.e. 32k > 8k,
c) then it goes thru merge_extent_mapping() which tries to add a [8k, 8k)
(with a length 0) and returns -EEXIST as [8k, 32k) is already in tree,
d) so btrfs_get_extent() ends up returning -EEXIST to dio read/write,
which is confusing applications.
Here I conclude all the possible situations,
1) start < existing->start
+-----------+em+-----------+
+--prev---+ | +-------------+ |
| | | | | |
+---------+ + +---+existing++ ++
+
|
+
start
2) start == existing->start
+------------em------------+
| +-------------+ |
| | | |
+ +----existing-+ +
|
|
+
start
3) start > existing->start && start < (existing->start + existing->len)
+------------em------------+
| +-------------+ |
| | | |
+ +----existing-+ +
|
|
+
start
4) start >= (existing->start + existing->len)
+-----------+em+-----------+
| +-------------+ | +--next---+
| | | | | |
+ +---+existing++ + +---------+
+
|
+
start
As we can see, it turns out that if start is within existing em (front
inclusive), then the existing em should be returned as is, otherwise,
we try our best to merge candidate em with sibling ems to form a
larger em (in order to reduce the total number of em).
Reported-by: David Vallender <david.vallender@landmark.co.uk>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
%block_len could be checked on deciding if two em are mergeable.
merge_extent_mapping() has only added the front pad if the front part
of em gets truncated, but it's possible that the end part gets
truncated.
For both compressed extent and inline extent, em->block_len is not
adjusted accordingly, and for regular extent, em->block_len always
equals to em->len, hence this sets em->block_len with em->len.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The reada_lock in struct btrfs_device was only initialised, and not
actually used. That's good because there's another lock also called
reada_lock in the btrfs_fs_info that was quite heavily used. Remove
this one.
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Before rbio_orig_end_io() goes to free rbio, rbio may get merged with
more bios from other rbios and rbio->bio_list becomes non-empty,
in that case, these newly merged bios don't end properly.
Once unlock_stripe() is done, rbio->bio_list will not be updated any
more and we can call bio_endio() on all queued bios.
It should only happen in error-out cases, the normal path of recover
and full stripe write have already set RBIO_RMW_LOCKED_BIT to disable
merge before doing IO, so rbio_orig_end_io() called by them doesn't
have the above issue.
Reported-by: Jérôme Carretero <cJ-ko@zougloub.eu>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since raid6 recover tries all possible combinations of failed stripes,
- when raid6 rebuild algorithm is used, i.e. raid6_datap_recov() and
raid6_2data_recov(), it may change the in-memory content of failed
stripes, if such a raid bio is cached, a later raid write rmw or recover
can steal @stripe_pages from it instead of reading from disks, such that
it carries the wrong content to do write rmw or recovery and ends up
with corruption or recovery failures.
- when raid5 rebuild algorithm is used, i.e. xor, raid bio can be cached
because the only failed stripe which contains @rbio->bio_pages gets
modified, others remain the same so that their in-memory content is
consistent with their on-disk content.
This adds a check to skip caching rbio if using raid6 recover.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Bio iterated by set_bio_pages_uptodate() is raid56 internal one, so it
will never be a BIO_CLONED bio, and since this is called by end_io
functions, bio->bi_iter.bi_size is zero, we mustn't use
bio_for_each_segment() as that is a no-op if bi_size is zero.
Fixes: 6592e58c6b ("Btrfs: fix write corruption due to bio cloning on raid5/6")
Cc: <stable@vger.kernel.org> # v4.12-rc6+
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is no function named btrfs_get_inode_index_count.
Explanation for magic number index_cnt=2 in btrfs_new_inode() is
actually located in btrfs_set_inode_index_count().
So replace 'btrfs_get_inode_index_count' in the comment by
'btrfs_set_inode_index_count'.
Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's not used outside of extent-tree so there is no reason to not be
static.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We call btrfs_free_stale_device() only when we alloc a new struct
btrfs_device (ret=1), so move it closer to where we alloc the new
device. Also drop the comments.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
I've noticed that the updated item checker stack consumption increased
dramatically in 542f5385e20cf97447 ("btrfs: tree-checker: Add checker
for dir item")
tree-checker.c:check_leaf +552 (176 -> 728)
The array is 255 bytes long, dynamic allocation would slow down the
sanity checks so it's more reasonable to keep it on-stack. Moving the
variable to the scope of use reduces the stack usage again
tree-checker.c:check_leaf -264 (728 -> 464)
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
gcc-8 reports:
fs/btrfs/ioctl.c: In function 'btrfs_ioctl':
./include/linux/string.h:245:9: warning: '__builtin_strncpy' specified
bound 1024 equals destination size [-Wstringop-truncation]
We need one less byte or call strlcpy() to make it a nul-terminated
string. This is done on the next line anyway, but we want to avoid the
warning.
Signed-off-by: Xiongfeng Wang <xiongfeng.wang@linaro.org>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
It appears from the original commit [1] that there isn't any design
specific reason not to fail the mount instead of just warning. This
patch will change it to fail.
[1]
commit 319e4d0661
btrfs: Enhance super validation check
Fixes: 319e4d0661 ("btrfs: Enhance super validation check")
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs-progs uses super flag bit BTRFS_SUPER_FLAG_METADUMP_V2 (1ULL << 34).
So just define that in kernel so that we know its been used.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We've avoided data losing raid profile when doing balance, but it
turns out that deleting a device could also result in the same
problem.
Say we have 3 disks, and they're created with '-d raid1' profile.
- We have chunk P (the only data chunk on the empty btrfs).
- Suppose that chunk P's two raid1 copies reside in disk A and disk B.
- Now, 'btrfs device remove disk B'
btrfs_rm_device()
-> btrfs_shrink_device()
-> btrfs_relocate_chunk() #relocate any chunk on disk B
to other places.
- Chunk P will be removed and a new chunk will be created to hold
those data, but as chunk P is the only one holding raid1 profile,
after it goes away, the new chunk will be created as single profile
which is our default profile.
This fixes the problem by creating an empty data chunk before
relocating the data chunk.
Metadata/System chunk are supposed to have non-zero bytes all the time
so their raid profile is preserved.
Reported-by: James Alandt <James.Alandt@wdc.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For a fallocate's zero range operation that targets a range with an end
that is not aligned to the sector size, we can end up not updating the
inode's i_size. This happens when the last page of the range maps to an
unwritten (prealloc) extent and before that last page we have either a
hole or a written extent. This is because in this scenario we relied
on a call to btrfs_prealloc_file_range() to update the inode's i_size,
however it can only update the i_size to the "down aligned" end of the
range.
Example:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt
$ xfs_io -f -c "pwrite -S 0xff 0 428K" /mnt/foobar
$ xfs_io -c "falloc -k 428K 4K" /mnt/foobar
$ xfs_io -c "fzero 0 430K" /mnt/foobar
$ du --bytes /mnt/foobar
438272 /mnt/foobar
The inode's i_size was left as 428Kb (438272 bytes) when it should have
been updated to 430Kb (440320 bytes).
Fix this by always updating the inode's i_size explicitly after zeroing
the range.
Fixes: ba6d5887946ff86d93dc ("Btrfs: add support for fallocate's zero range operation")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During a buffered IO write, we can have an extent state that we got when
we locked the range (if the range starts at an offset lower than eof), so
always pass it to btrfs_dirty_pages() so that setting the delalloc bit
in the range does not need to do a full search in the inode's io tree,
saving time and reducing the amount of time we hold the io tree's lock.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This implements support the zero range operation of fallocate. For now
at least it's as simple as possible while reusing most of the existing
fallocate and hole punching infrastructure.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since fail stripe index in rbio would be used to decide which
algorithm reconstruction would be run, we cannot merge rbios if
their's fail striped indexes are different, otherwise, one of the two
reconstructions would fail.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Given the above
'
if (last->operation != cur->operation)
return 0;
',
it's guaranteed that two operations are same.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Assign ret = -EINVAL where it is actually required.
Remove { } around single line if else code.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_device::scrub_device is not a device which is being scrubbed,
but it holds the scrub context, so rename to reflect the same. No
functional changes here.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is no other consumer for btrfs_handle_error() other than
__btrfs_handle_fs_error(), further this function quite small.
Merge it into its parent.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
[ reformat comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
__btrfs_handle_fs_error() sets BTRFS_FS_STATE_ERROR, and calls
btrfs_handle_error() so no need to check if the BTRFS_FS_STATE_ERROR
is set in btrfs_handle_error(). And there is no other user of
btrfs_handle_error() as well.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is a scenario that can end up with rebuild process failing to
return good content, i.e.
suppose that all disks can be read without problems and if the content
that was read out doesn't match its checksum, currently for raid6
btrfs at most retries twice,
- the 1st retry is to rebuild with all other stripes, it'll eventually
be a raid5 xor rebuild,
- if the 1st fails, the 2nd retry will deliberately fail parity p so
that it will do raid6 style rebuild,
however, the chances are that another non-parity stripe content also
has something corrupted, so that the above retries are not able to
return correct content, and users will think of this as data loss.
More seriouly, if the loss happens on some important internal btree
roots, it could refuse to mount.
This extends btrfs to do more retries and each retry fails only one
stripe. Since raid6 can tolerate 2 disk failures, if there is one
more failure besides the failure on which we're recovering, this can
always work.
The worst case is to retry as many times as the number of raid6 disks,
but given the fact that such a scenario is really rare in practice,
it's still acceptable.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The raid6 corruption is that,
suppose that all disks can be read without problems and if the content
that was read out doesn't match its checksum, currently for raid6
btrfs at most retries twice,
- the 1st retry is to rebuild with all other stripes, it'll eventually
be a raid5 xor rebuild,
- if the 1st fails, the 2nd retry will deliberately fail parity p so
that it will do raid6 style rebuild,
however, the chances are that another non-parity stripe content also
has something corrupted, so that the above retries are not able to
return correct content.
We've fixed normal reads to rebuild raid6 correctly with more retries
in Patch "Btrfs: make raid6 rebuild retry more"[1], this is to fix
scrub to do the exactly same rebuild process.
[1]: https://patchwork.kernel.org/patch/10091755/
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Update btrfs_check_rw_degradable() to check against the given device if
its lost.
We can use this function to know if the volume is going to be in
degraded mode OR failed state, when the given device fails. Which is
needed when we are handling the device failed state.
A preparatory patch does not affect the flow as such.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
[ enhance comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
All callers pass either GFP_NOFS or GFP_KERNEL now, so we can sink the
parameter to the function, though we lose some of the slightly better
semantics of GFP_KERNEL in some places, it's worth cleaning up the
callchains.
Signed-off-by: David Sterba <dsterba@suse.com>
There's only one instance where we pass different gfp mask to
unlock_extent_cached. Add a separate helper for that and then we can
drop the gfp parameter from unlock_extent_cached.
Signed-off-by: David Sterba <dsterba@suse.com>
Recent patches reworking the mount path left some unused parameters. We
pass a vfsmount to mount_subvol, the flags and data (ie. mount options)
have been already applied and we will not need them.
Signed-off-by: David Sterba <dsterba@suse.com>
Long ago, commit edf24abe51 ("btrfs: sanity mount option parsing and
early mount code") split the btrfs_parse_options() into two parts
(btrfs_parse_early_options() and btrfs_parse_options()). As a result,
btrfs_parse_optins no longer gets called twice and is the last one to
parse mount option string. Therefore there is no need to dup it.
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In fact nobody is waiting on @wait's waitqueue, it can be safely
removed.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The bio is not referenced after it has been submitted and the endio is
going to consume the sole reference on successful submission. On error,
the callers of __btrfs_submit_dio_bio do invoke bio_put so we don't
leak it either.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The bio is never referenced after it has been submitted so there is no
point in getting an extra reference.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The bio that is passsed is the newly created repair bio which already
has a reference count of 1, which is going to be consumed by the
endio routine on successful submission. On error the handler also
calls bio_put.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
bio_get/set is necessary only if the bio is going to be referenced
following submissions. In the code paths where such calls are made
we don't really need them since the bio is referenced only if
btrfs_map_bio returns an error. And this function can return an error
prior to submission only. So referencing the bio is safe. Furthermore
we do call bio_endio which will consume the last reference. So let's
remove the redundant calls.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As it's a single instance and local to the file, we don't need to pass
it as an argument.
Reviewed-by: Timofey Titovets <nefelim4ag@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The callback is trivial and we don't need the abstraction for our
purposes. Let's open code it.
Reviewed-by: Timofey Titovets <nefelim4ag@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The callback is trivial and we don't need the abstraction for our
purposes. Let's open code it and also make the array types explicit.
Reviewed-by: Timofey Titovets <nefelim4ag@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Remove unused arg 'holder' from parse_subvol_options(), which has been
forgotten to be cleaned in the commit b99beb110e2d ("btrfs: split
parse_early_options() in two").
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since setup_root_args() is not used anymore, just remove it.
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now parse_early_options() is used by both btrfs_mount() and
btrfs_mount_root(). However, the former only needs subvol related part
and the latter needs the others.
Therefore extract the subvol related parts from parse_early_options() and
move it to new parse function (parse_subvol_options()).
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Cleanup btrfs_mount() by using btrfs_mount_root(). This avoids getting
btrfs_mount() called twice in mount path.
Old btrfs_mount() will do:
0. VFS layer calls vfs_kern_mount() with registered file_system_type
(for btrfs, btrfs_fs_type). btrfs_mount() is called on the way.
1. btrfs_parse_early_options() parses "subvolid=" mount option and set the
value to subvol_objectid. Otherwise, subvol_objectid has the initial
value of 0
2. check subvol_objectid is 5 or not. Assume this time id is not 5, then
btrfs_mount() returns by calling mount_subvol()
3. In mount_subvol(), original mount options are modified to contain
"subvolid=0" in setup_root_args(). Then, vfs_kern_mount() is called with
btrfs_fs_type and new options
4. btrfs_mount() is called again
5. btrfs_parse_early_options() parses "subvolid=0" and set 5 (instead of 0)
to subvol_objectid
6. check subvol_objectid is 5 or not. This time id is 5 and mount_subvol()
is not called. btrfs_mount() finishes mounting a root
7. (in mount_subvol()) with using a return vale of vfs_kern_mount(), it
calls mount_subtree()
8. return subvolume's dentry
Reusing the same file_system_type (and btrfs_mount()) for vfs_kern_mount()
is the cause of complication.
Instead, new btrfs_mount() will do:
1. parse subvol id related options for later use in mount_subvol()
2. mount device's root by calling vfs_kern_mount() with
btrfs_root_fs_type, which is not registered to VFS by
register_filesystem(). As a result, btrfs_mount_root() is called
3. return by calling mount_subvol()
The code of 2. is moved from the first part of mount_subvol().
The semantics of device holder changes from btrfs_fs_type to
btrfs_root_fs_type and has to be used in all contexts. Otherwise we'd
get wrong results when mount and dev scan would not check the same
thing. (this has been found indendently and the fix is folded into this
patch)
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ fold the btrfs_control_ioctl fixup, extend the comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
Add btrfs_mount_root() and new file_system_type for preparation of cleanup
of btrfs_mount(). Code path is not changed yet.
btrfs_mount_root() is almost the same as current btrfs_mount(), but doesn't
have subvolume related part.
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Functions called from extent_write_cache_pages used void* as generic
callback data, but all of them convert it to extent_page_data, or use it
directly.
Signed-off-by: David Sterba <dsterba@suse.com>
The function extent_write_cache_pages is modelled after
write_cache_pages which is a generic interface and the writepage
parameter makes sense there. In btrfs we know exactly which callback
we're going to use, so we can pass it directly.
Signed-off-by: David Sterba <dsterba@suse.com>
flush_epd_write_bio is same as flush_write_bio, no point having two such
functions. Merge them to flush_write_bio. The 'noinline' attribute is
removed as it does not have any meaning.
Signed-off-by: David Sterba <dsterba@suse.com>
Currently there are 2 function doing binary search on btrfs nodes:
bin_search and btrfs_bin_search. The latter being a simple wrapper for
the former. So eliminate the wrapper and just rename bin_search to
btrfs_bin_search. No functional changes
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The tree argument passed to extent_write_full_page is referenced from
the page being passed to the same function. Since we already have
enough information to get the reference, remove the function parameter.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function is called only from submit_compressed_extents and the
io tree being passed is always that of the inode. But we are also
passing the inode, so just move getting the io tree pointer in
extent_write_locked_range to simplify the signature.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This code was added in 492bb6deee ("Btrfs: Hold a reference on bios
during submit_bio, add some extra bio checks"). However, holding a
reference on a bio is necessary only if it's going to be referenced
after the submit_bio returns and the bio is completed. In this
particular instance this is not the case so there is no need to hold
an extra reference since we directly return.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When modifying a tree where the root is at BTRFS_MAX_LEVEL - 1 then
the level variable is going to be 7 (this is the max height of the
tree). On the other hand btrfs_cow_block is always called with
"level + 1" as an index into the nodes and slots arrays. This leads to
an out of bounds access. Admittdely this will be benign since an OOB
access of the nodes array will likely read the 0th element from the
slots array, which in this case is going to be 0 (since we start CoW at
the top of the tree). The OOB access into the slots array in turn will
read the 0th and 1st values of the locks array, which would both be 0
at the time. However, this benign behavior relies on the fact that the
path being passed hasn't been initialised, if it has already been used to
query a btree then it could potentially have populated the nodes/slots arrays.
Fix it by explicitly checking if we are at level 7 (the maximum allowed
index in nodes/slots arrays) and explicitly call the CoW routine with
NULL for parent's node/slot.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Fixes-coverity-id: 711515
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These duplicate includes have been found with scripts/checkincludes.pl but
they have been removed manually to avoid removing false positives.
Signed-off-by: Pravin Shedge <pravin.shedge4linux@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function was introduced by 247e743cbe ("Btrfs: Use async helpers
to deal with pages that have been improperly dirtied") and it didn't do
any error handling then. This function might very well fail in ENOMEM
situation, yet it's not handled, this could lead to inconsistent state.
So let's handle the failure by setting the mapping error bit.
Cc: stable@vger.kernel.org
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are several places opencoding this conversion, add a helper now
that we have 3 compression algorithms.
Signed-off-by: David Sterba <dsterba@suse.com>
Before returning hole_em in btrfs_get_fiemap_extent we check if it's different
than null. However, by the time this null check is triggered we already know
hole_em is not null because it means it points to the em we found and it
has already been dereferenced.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
trans was statically assigned to NULL and this never changed over the
course of btrfs_get_extent. So remove any code which checks whether
trans != NULL and just hardcode the fact trans is always NULL.
Resolves-coverity-id: 112806
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The return value of sizeof() is of type size_t, so we must print it
using the %z format modifier rather than %l to avoid this warning
on some architectures:
fs/btrfs/tree-checker.c: In function 'check_dir_item':
fs/btrfs/tree-checker.c:273:50: error: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'u32' {aka 'unsigned int'} [-Werror=format=]
Fixes: 005887f2e3e0 ("btrfs: tree-checker: Add checker for dir item")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This changes to use struct completion directly and removes 'struct
scrub_bio_ret' along with the code using it.
This struct is used to get the return value from bio, but the caller can
access bio to get the return value directly and is holding a reference
on it so it won't go away underneath us and can be removed safely.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The defined wait is not used anywhere.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We need to call extent_range_clear_dirty_for_io()
on compression range to prevent application from changing
page content, while pages compressing.
extent_range_clear_dirty_for_io() runs on each loop iteration,
"(end - start)" can be much (up to 1024 times) bigger
then compression range (BTRFS_MAX_UNCOMPRESSED).
The start pointer is advanced each time we manage to compress part of
the range. The end pointer does not change so we could redirty the
remaining parts repeatedly.
Fix that behaviour by call extent_range_clear_dirty_for_io()
only once, the first time it happens.
This is the safest but probably not the best behaviour. Previous
iterations of the patch tried to redirty only the range that we were not
able to compress. This has been refused by David for safety reasons, the
writeout callchain is complex and there could be some path that relies
on redirtying the entire unwritten range.
Signed-off-by: Timofey Titovets <nefelim4ag@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ enhance changelog, the history and safety concerns, add comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
Slowest part of heuristic for now is kernel heap sort()
It's can take up to 55% of runtime on sorting bucket items.
As sorting will always call on most data sets to get correctly
byte_core_set_size, the only way to speed up heuristic, is to
speed up sort on bucket.
Add a general radix_sort function.
Radix sort require 2 buffers, one full size of input array
and one for store counters (jump addresses).
That increase usage per heuristic workspace +1KiB
8KiB + 1KiB -> 8KiB + 2KiB
That is LSD Radix, i use 4 bit as a base for calculating,
to make counters array acceptable small (16 elements * 8 byte).
That Radix sort implementation have several points to adjust,
I added him to make radix sort general usable in kernel,
like heap sort, if needed.
Performance tested in userspace copy of heuristic code,
throughput:
- average <-> random data: ~3500 MiB/s - heap sort
- average <-> random data: ~6000 MiB/s - radix sort
Signed-off-by: Timofey Titovets <nefelim4ag@gmail.com>
[ coding style fixes ]
Signed-off-by: David Sterba <dsterba@suse.com>
Currently device state is being managed by each individual int
variable such as struct btrfs_device::is_tgtdev_for_dev_replace.
Instead of that declare btrfs_device::dev_state
BTRFS_DEV_STATE_FLUSH_SENT and use the bit operations.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently device state is being managed by each individual int
variable such as struct btrfs_device::is_tgtdev_for_dev_replace.
Instead of that declare btrfs_device::dev_state
BTRFS_DEV_STATE_MISSING and use the bit operations.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
[ whitespace adjustments ]
Signed-off-by: David Sterba <dsterba@suse.com>
Currently device state is being managed by each individual int
variable such as struct btrfs_device::missing. Instead of that
declare btrfs_device::dev_state BTRFS_DEV_STATE_MISSING and use
the bit operations.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by : Nikolay Borisov <nborisov@suse.com>
[ whitespace adjustments ]
Signed-off-by: David Sterba <dsterba@suse.com>
Currently device state is being managed by each individual int
variable such as struct btrfs_device::in_fs_metadata. Instead of
that declare device state BTRFS_DEV_STATE_IN_FS_METADATA and use
the bit operations.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
[ whitespace adjustments ]
Signed-off-by: David Sterba <dsterba@suse.com>
Currently device state is being managed by each individual int
variable such as struct btrfs_device::writeable. Instead of that
declare device state BTRFS_DEV_STATE_WRITEABLE and use the
bit operations.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
[ whitespace adjustments ]
Signed-off-by: David Sterba <dsterba@suse.com>
This patch creates a helper function to get either the rcu device path
or missing.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
[ rename to btrfs_dev_name, switch to if/else ]
Signed-off-by: David Sterba <dsterba@suse.com>
We can query the bdev directly when needed at btrfs_discard_extent()
so drop btrfs_device::can_discard.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Suggested-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function update_share_count is local to the source and does
not need to be in global scope, so make it static.
Cleans up sparse warning:
fs/btrfs/backref.c:219:6: warning: symbol 'update_share_count' was not
declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 9036c10208 ("Btrfs: update hole handling v2") added the
FLAG_VACANCY to denote holes, however there was already a consistent way
of flagging extents which represent hole - ->block_start =
EXTENT_MAP_HOLE. And also the only place where this flag is checked is
in the fiemap code, but the block_start value is also checked and every
other place in the filesystem detects holes by using block_start
value's. So remove the extra flag. This survived a full xfstest run.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function is no longer used outside of extent-tree.c.
Make it static.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
* ZSTD_inBuffer in_buf
* ZSTD_outBuffer out_buf
are used in all functions to pass the compression parameters and the
local variables consume some space. We can move them to the workspace
and reduce the stack consumption:
zstd.c:zstd_decompress -24 (136 -> 112)
zstd.c:zstd_decompress_bio -24 (144 -> 120)
zstd.c:zstd_compress_pages -24 (264 -> 240)
Signed-off-by: David Sterba <dsterba@suse.com>
Reviewed-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are now 20 bytes of holes, we can reduce that to 4 by minor
changes. Moving 'aborted' to the status and flags is also more logical,
similar for num_dirty_bgs. The size goes from 432 to 416.
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Recent updates to the structure left some holes, reorder the types so
the packing is tight. The size goes from 112 to 104 on 64bit.
Signed-off-by: David Sterba <dsterba@suse.com>
The use_count is a reference counter, we can use the refcount_t type,
though we don't use the atomicity. This is not a performance critical
code and we could catch the underflows. The type is changed from long,
but the number of references will fit an int.
Signed-off-by: David Sterba <dsterba@suse.com>
Last user was removed in a monster commit a22285a6a3
("Btrfs: Integrate metadata reservation with start_transaction") in
2010.
Signed-off-by: David Sterba <dsterba@suse.com>
The semantics of adding_csums matches bool, 'short' was most likely used
to save space in a698d0755a ("Btrfs: add a type field for the
transaction handle").
Signed-off-by: David Sterba <dsterba@suse.com>
Due to new_inline logic, the create == 0 is always true at this
point in the code, so the create != 0 branch can be removed.
Signed-off-by: Edmund Nadolski <enadolski@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Replace hardcoded numeric argument values for inode_only with the
constants defined for that use.
Signed-off-by: Edmund Nadolski <enadolski@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The maximum size of a checksum buffer is known, BTRFS_CSUM_SIZE, and we
don't have to allocate it dynamically. This code path is not used at all
as we have only the crc32c and use an on-stack buffer already.
Signed-off-by: David Sterba <dsterba@suse.com>
Setting plug can merge adjacent IOs before dispatching IOs to the disk
driver.
Without plug, it'd not be a problem for single disk usecases, but for
multiple disks using raid profile, a large IO can be split to several
IOs of stripe length, and plug can be helpful to bring them together
for each disk so that we can save several disk access.
Moreover, fsync issues synchronous writes, so plug can really take
effect.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
No functional changes, create btrfs_open_one_device() from
__btrfs_open_devices(). This is a preparatory work to add dynamic
device scan.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
[ minor whitespace fixes ]
Signed-off-by: David Sterba <dsterba@suse.com>
No functional changes. This helps to move the entire section into
a new function.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is in preparation to move a section of code in __btrfs_open_devices()
into a new function so that it can be reused. As we set seeding if any of
the device is having SB flag BTRFS_SUPER_FLAG_SEEDING, so do it in the
device list loop itself. No functional changes.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With gcc-4.1.2:
fs/btrfs/ref-verify.c: In function ‘btrfs_build_ref_tree’:
fs/btrfs/ref-verify.c:1017: warning: ‘root’ is used uninitialized in this function
The variable is indeed passed uninitialized, but it is never used by the
callee. However, not all versions of gcc are smart enough to notice.
Hence remove the unused parameter from walk_up_tree() to silence the
compiler warning.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David Sterba <dsterba@suse.com>
All callers pass btrfs_get_extent_fiemap and get_extent_skip_holes
itself is used only as a fiemap helper.
Signed-off-by: David Sterba <dsterba@suse.com>
All callers pass btrfs_get_extent_fiemap and we don't expect anything
else in the context of extent_fiemap.
Signed-off-by: David Sterba <dsterba@suse.com>
Previous patches cleaned up all places where
extent_page_data::get_extent was set and it was btrfs_get_extent all the
time, so we can simply call that instead.
This also reduces size of extent_page_data by 8 bytes which has positive
effect on stack consumption on various functions on the write out path.
Signed-off-by: David Sterba <dsterba@suse.com>
Since tree-checker has verified leaf when reading from disk, we don't
need the existing verify_dir_item() or btrfs_is_name_len_valid() checks.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add checker for dir item, for key types DIR_ITEM, DIR_INDEX and
XATTR_ITEM.
This checker does comprehensive checks for:
1) dir_item header and its data size
Against item boundary and maximum name/xattr length.
This part is mostly the same as old verify_dir_item().
2) dir_type
Against maximum file types, and against key type.
Since XATTR key should only have FT_XATTR dir item, and normal dir
item type should not have XATTR key.
The check between key->type and dir_type is newly introduced by this
patch.
3) name hash
For XATTR and DIR_ITEM key, key->offset is name hash (crc32c).
Check the hash of the name against the key to ensure it's correct.
The name hash check is only found in btrfs-progs before this patch.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All callers use GFP_NOFS, we don't have to pass it as an argument. The
built-in tests pass GFP_KERNEL, but they run only at module load time
and NOFS works there as well.
Signed-off-by: David Sterba <dsterba@suse.com>
Use __clear_extent_bit directly in case we want to pass unknown
gfp flags. Otherwise all clear_extent_bit callers use GFP_NOFS, so we
can sink them to the function and reduce argument count, at the cost
that __clear_extent_bit has to be exported.
Signed-off-by: David Sterba <dsterba@suse.com>
We take the fs_devices::device_list_mutex mutex in write_all_supers
which will prevent any add/del changes to the device list. Therefore we
don't need to use the RCU variant list_for_each_entry_rcu in any of the
called functions.
Signed-off-by: David Sterba <dsterba@suse.com>
We don't need to use the mutex as we do not modify the devices nor the
list itself and just read information about device counts.
Move copying fsid out of the protected section, not applicable to RCU
same as the rest of the retrieved information.
Signed-off-by: David Sterba <dsterba@suse.com>
We don't need to use the mutex as we do not modify the devices nor the
list itself and just read some information:
does not change during device lifetime:
- devid
- uuid
- name (ie. the path)
may change in parallel to the ioctl call, but can lead only to reporting
inacurracy:
- bytes_used
- total_bytes
Signed-off-by: David Sterba <dsterba@suse.com>
A helper to free a device and all it's dynamically allocated members,
like the rcu_string name or flush_bio. This is going to replace all
open coded places.
Signed-off-by: David Sterba <dsterba@suse.com>
Make it clear that it is an RCU helper, we want to use the name
free_device for a wrapper freeing all device members.
Signed-off-by: David Sterba <dsterba@suse.com>
These rules have been hidden in several if-else and are not
straightforward to follow, for example, dio submit hook's nocsum case
has a bug , i.e. doing async submit instead of sync submit, which has
been fixed recently.
This is documenting the rules for reference.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
After commit 996478ca9c ("btrfs: change how we decide to commit
transactions during flushing") there is no need to hold the delayed_rsv
during the percpu_counter_compare call since we get the byte's snapshot
earlier. So hold the lock only while reading delayed_rsv.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Adding __init macro gives kernel a hint that this function is only used
during the initialization phase and its memory resources can be freed up
after.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Function btrfs_add_device() is adding the device item so rename to
reflect that in the function. Similarly we have btrfs_rm_dev_item().
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_create_tree() will unconditionally generate UUID for any root.
So for quota tree and data reloc tree created by kernel, they will have
unique UUIDs.
However UUID in root item is only referred by UUID tree, which only
records UUID for fs trees. This makes unique UUIDs for quota/data reloc
tree meaningless.
Leave the UUID as zero for non-fs tree, making btrfs-debug-tree output
less confusing.
Reported-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A cleanup patch no functional change, we hold volume_mutex before
calling btrfs_rm_device, so move it into the function itself.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Right before we go into this loop locked_end is set to alloc_end - 1 and
is being used in nearby functions, no need to have exceptions. This just
makes the code consistent, no functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fallocating a file in btrfs goes through several stages. The one before
actually inserting the fallocated extents is to create a qgroup
reservation, covering the desired range. To this end there is a loop in
btrfs_fallocate which checks to see if there are holes in the fallocated
range or !PREALLOC extents past EOF and if so create qgroup reservations
for them. Unfortunately, the main condition of the loop is burried right
at the end of its body rather than in the actual while statement which
makes it non-obvious. Fix this by moving the condition in the while
statement where it belongs. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It was introduced because btrfs used to do blkdev_put in a deferred
work, now that btrfs has blkdev_put in place, this rcu_barrier can be
removed.
modprobe -r btrfs will do btrfs_cleanup_fs_uuids(), where it cleanup
every %fs_devices on the list, but when we do btrfs_close_devices(), we
have replaced the devices on the list with dummy ones which only have
the same name and uuid, so modprobe -r btrfs will free those instead of
what we were using, this change won't cause a problem for it.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ copied 2nd paragraph from mailinglist discussion ]
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_balance_delayed_items is the sole caller of
btrfs_wq_run_delayed_node and already includes one of the checks whether
the delayed inodes should be run. On the other hand
btrfs_wq_run_delayed_node duplicates that check and performs an
additional one for wq congestion.
Let's remove the duplicate check and move the congestion one in
btrfs_balance_delayed_items, leaving btrfs_wq_run_delayed_node to only
care about setting up the wq run. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs_async_run_delayed_root's implementation uses 3 goto
labels to mimic the functionality of a simple do {} while loop. Refactor
the function to use a do {} while construct, making intention clear and
code easier to follow. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The following callpath is always invoked with mirror_num set to 0, so
let's remove it as an argument and directly pass 0 to __do_redpage. No
functional change.
extent_readpages
__extent_readpages
__do_contiguous_readpages
__do_readpage
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's sole callsite was removed in a previous patch so just nuke it for good.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As per atomic_t.txt documentation :
- RMW operations that have a return value are fully ordered;
atomic_xchg is one such operation so it already includes everything it
needs w.r.t memory ordering and add a comment to be more explicit about
that.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit addc3fa74e ("Btrfs: Fix the problem that the dirty flag of dev
stats is cleared") reworked the way device stats changes are tracked. A
new atomic dev_stats_ccnt counter was introduced which is incremented
every time any of the device stats counters are changed. This serves as
a flag whether there are any pending stats changes. However, this patch
only partially implemented the correct memory barriers necessary:
- It only ordered the stores to the counters but not the reads e.g.
btrfs_run_dev_stats
- It completely omitted any comments documenting the intended design and
how the memory barriers pair with each-other
This patch provides the necessary comments as well as adds a missing
smp_rmb in btrfs_run_dev_stats. Furthermore since dev_stats_cnt is only
a snapshot at best there was no point in reading the counter twice -
once in btrfs_dev_stats_dirty and then again when assigning stats_cnt.
Just collapse both reads into 1.
Fixes: addc3fa74e ("Btrfs: Fix the problem that the dirty flag of dev stats is cleared")
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_end_bio() is using btrfs_dev_stat_inc() and then
btrfs_dev_stat_print_on_error() separately instead use
btrfs_dev_stat_inc_and_print() directly.
As of now there isn't any bio in btrfs which is - a non-empty write and
also the REQ_PREFLUSH flag is set. So in actual the condition
if (bio->bi_opf & REQ_PREFLUSH)
is never true in btrfs_end_bio(), and so there won't be any redundant
error log by using btrfs_dev_stat_inc_and_print() separately one for
write and another for flush.
This consolidation will help to add the device critical error handles in
the function btrfs_dev_stat_inc_and_print() and which can be renamed as
needed.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's pointless to defer it to a kthread helper as we're not under a
special context.
For reference, commit 1f78160ce1 ("Btrfs: using rcu lock in the reader
side of devices list") introduced RCU freeing for device structures.
Originally the blkdev_put was called from free_device and rcu_barrier had
to be called. This is no longer required, bdev and our device structures
are now freed separately.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ enhance changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
In functions like btrfs_create(), we run both
btrfs_balance_delayed_items() and btrfs_btree_balance_dirty() after
the operation, but btrfs_btree_balance_dirty() is surely going to run
btrfs_balance_delayed_items().
This keeps only btrfs_btree_balance_dirty().
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
nfs_idmap_legacy_upcall() is supposed to be called with 'aux' pointing
to a 'struct idmap', via the call to request_key_with_auxdata() in
nfs_idmap_request_key().
However it can also be reached via the request_key() system call in
which case 'aux' will be NULL, causing a NULL pointer dereference in
nfs_idmap_prepare_pipe_upcall(), assuming that the key description is
valid enough to get that far.
Fix this by making nfs_idmap_legacy_upcall() negate the key if no
auxdata is provided.
As usual, this bug was found by syzkaller. A simple reproducer using
the command-line keyctl program is:
keyctl request2 id_legacy uid:0 '' @s
Fixes: 57e62324e4 ("NFS: Store the legacy idmapper result in the keyring")
Reported-by: syzbot+5dfdbcf7b3eb5912abbb@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org> # v3.4+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Trond Myklebust <trondmy@gmail.com>
Get rid of gfs2_log_header_in by integrating it into get_log_header.
Clean up the crc32 computations and use the same functions for encoding
and decoding to make things less confusing. Eliminate lh_hash from
gfs2_log_header_host which is completely useless.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Now, we invoke f2fs_mark_inode_dirty_sync() to make an inode dirty in
advance of creating a new node page for the inode. By this, some inodes
whose node page is not created yet can be linked into the global dirty
list.
If the checkpoint is executed at this moment, the inode will be written
back by writeback_single_inode() and finally update_inode_page() will
fail to detach the inode from the global dirty list because the inode
doesn't have a node page.
The problem is that the inode's state in VFS layer will become clean
after execution of writeback_single_inode() and it's still linked in
the global dirty list of f2fs and this will cause a kernel panic.
So, we will prevent the newly created inode from being dirtied during
the FI_NEW_INODE flag of the inode is set. We will make it dirty
right after the flag is cleared.
Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: Youngjin Gil <youngjin.gil@samsung.com>
Tested-by: Hobin Woo <hobin.woo@samsung.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch enables ->fiemap to handle FIEMAP_FLAG_XATTR flag for xattr
mapping info lookup purpose.
It makes f2fs passing generic/425 test in fstest.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fix to cover f2fs_inline_data_fiemap with inode_lock in order
to make that interface avoiding race with mapping change.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Check node page again in write end io in case of
data corruption during inflght IO.
Signed-off-by: Yunlei He <heyunlei@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When calculating required free section during file defragmenting, we
should skip holes in file, otherwise we will probably fail to defrag
sparse file with large size.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When committing inmem pages is successful, we revoke already committed
blocks in __revoke_inmem_pages() and finally replace the committed
ones with the old blocks using f2fs_replace_block(). However, if
the committed block was newly created one, the address of the old
block is NEW_ADDR and __f2fs_replace_block() cannot handle NEW_ADDR
as new_blkaddr properly and a kernel panic occurrs.
Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com>
Tested-by: Shu Tan <shu.tan@samsung.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The to parameter of gfs2_page_add_databufs is passed inconsistently:
once as from + len, once as from + len - 1. Just pass len instead.
In addition, once we're past the end, we can immediately break out of
the loop.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Add a small inline function for computing the maximum size of a stuffed
inode instead of open coding that in several places throughout the code.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Implement the top-level bits of punching a hole into a file.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Add an upper bound to the range of blocks to deallocate blocks to
function trunc_dealloc so that this function can be used for truncating
a file as well as for punching a hole into a file.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Pull the code for computing the range of metapointers to iterate out of
gfs2_metapath_ra (for readahead), sweep_bh_for_rgrps (for deallocating
metapointers within a block), and trunc_dealloc (for walking the
metadata tree).
In sweep_bh_for_rgrps, move the code for looking up the resource group
descriptor of the current resource group out of the inner loop. The
metatype check moves to trunc_dealloc.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Since commit 57e62324e4 ("NFS: Store the legacy idmapper result in the
keyring") nfs_idmap_cache_timeout changed units from jiffies to seconds.
Unfortunately sysctl interface was not updated accordingly.
As a effect updating /proc/sys/fs/nfs/idmap_cache_timeout with some
value will incorrectly multiply this value by HZ.
Also reading /proc/sys/fs/nfs/idmap_cache_timeout will show real value
divided by HZ.
Fixes: 57e62324e4 ("NFS: Store the legacy idmapper result in the keyring")
Signed-off-by: Jan Chochol <jan@chochol.info>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Commit 8224b2734a ("NFS: Add static NFS I/O tracepoints") had a
hack to work around some odd behavior observed with
__print_symbolic. I couldn't ever get it to display NFS_FILE_SYNC
when using TRACE_DEFINE_ENUM macros to set up the enum values.
I tracked down the actual bug that forced me to add the workaround.
That issue will be addressed soon, so replace the hack with a proper
implementation.
Fixes: 8224b2734a ("NFS: Add static NFS I/O tracepoints")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
A pNFS server may return LAYOUTUNAVAILABLE error on LAYOUTGET for files
which don't have any layout. In this situation pnfs_update_layout
currently returns NULL. As this NULL is converted into ENOMEM, IO
requests fails instead of falling back to MDS.
Do not return ENOMEM on LAYOUTUNAVAILABLE and let client retry through
MDS.
Fixes 8d40b0f148. I will suggest to backport this fix to affected
stable branches.
Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
[trondmy: Use IS_ERR_OR_NULL()]
Fixes: 8d40b0f148 ("NFS filelayout:call GETDEVICEINFO after...")
Cc: stable@vger.kernel.org # v4.11+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Currently, we don't check sb_agblocks or sb_agblklog when we validate
the superblock, which means that we can fuzz garbage values into those
values and the mount succeeds. This leads to all sorts of UBSAN
warnings in xfs/350 since we can then coerce other parts of xfs into
shifting by ridiculously large values.
Once we've validated agblocks, make sure the agcount makes sense.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Eryu Guan reported seeing occasional hangs when running generic/269 with
a new fsstress that supports clonerange/deduperange. The cause of this
hang is an infinite loop when we convert the CoW fork extents from
unwritten to real just prior to writing the pages out; the infinite
loop happens because there's nothing in the CoW fork to convert, and so
it spins forever.
The fundamental issue here is that when we go to perform these CoW fork
conversions, we're supposed to have an extent waiting for us, but the
low space CoW reaper has snuck in and blown them away! There are four
conditions that can dissuade the reaper from touching our file -- no
reflink iflag; dirty page cache; writeback in progress; or directio in
progress. We check the four conditions prior to taking the locks, but
we neglect to recheck them once we have the locks, which is how we end
up whacking the writeback that's in progress.
Therefore, refactor the four checks into a helper function and call it
once again once we have the locks to make sure we really want to reap
the inode. While we're at it, add an ASSERT for this weird condition so
that we'll fail noisily if we ever screw this up again.
Reported-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Tested-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
xfs_bmbt_irec.br_blockcount is declared as xfs_filblks_t, which is an
unsigned 64-bit integer. Though the bmbt helpers will never set a value
larger than 2^21 (since the underlying on-disk extent record has a
length field that is only 21 bits wide), we should be a little defensive
about checking that a bmbt record doesn't exceed what we're expecting or
overflow into the next AG.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
A btree format inode fork with zero records makes no sense, so reject it
if we see it, or else we can miscalculate memory allocations. Found by
zeroes fuzzing {a,u3}.bmbt.numrecs in xfs/{374,378,412} with KASAN.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
In the attribute leaf verifier, we can check for obviously bad values of
firstused and count so that later attempts at lasthash don't run off the
end of the memory buffer. Found by ones fuzzing hdr.count in xfs/400 with
KASAN.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
In xfs_scrub_dir_rec, we must walk through the directory block entries
to arrive at the offset given by the hash structure. If we blindly
trust the hash address, we can end up midway into a directory entry and
stray outside the block. Found by lastbit fuzzing lents[3].address in
xfs/390 with KASAN enabled.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Don't iunlock an unlocked inode, which can happen if the parent pointer
scrubber bails out with sc->ip unlocked while trying to grab the parent
directory inode.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Whenever we load a buffer, explicitly re-call the structure verifier to
ensure that memory isn't corrupting things.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
