changes for 4.8. Please note that this pull request contains changes from the
ARM 32-bits port and ARM 64-bits port as well:
- Lubomir updates all BCM2835 (Raspberry Pi family) Device Tree source files with
their proper information about the on-board USB Ethernet adapter so there is
appropriate binding between this USB device and a device_node (useful for MAC
address fetching and stuff), this commit is also present for the ARM DT pull
request
- Eric adds support for the Raspberry Pi 3 aka BCM2837 and provides the binding
information and the basic SoC DT include file required to boot to a prompt
- Gerd updates the Raspberry Pi 3 DT with Ethernet information based on the
earlier change from Lubomir
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=KQmU
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.8/devicetree-arm64-part2' of http://github.com/Broadcom/stblinux into next/dt64
Merge "Broadcom ARM64 Device Tree changes for 4.8 (part 2)" from Florian Fainelli:
This pull request contains the second part of the Broadcom ARM64-based SoCs
changes for 4.8. Please note that this pull request contains changes from the
ARM 32-bits port and ARM 64-bits port as well:
- Lubomir updates all BCM2835 (Raspberry Pi family) Device Tree source files with
their proper information about the on-board USB Ethernet adapter so there is
appropriate binding between this USB device and a device_node (useful for MAC
address fetching and stuff), this commit is also present for the ARM DT pull
request
- Eric adds support for the Raspberry Pi 3 aka BCM2837 and provides the binding
information and the basic SoC DT include file required to boot to a prompt
- Gerd updates the Raspberry Pi 3 DT with Ethernet information based on the
earlier change from Lubomir
* tag 'arm-soc/for-4.8/devicetree-arm64-part2' of http://github.com/Broadcom/stblinux:
ARM: bcm2837: dt: Add the ethernet to the device trees
ARM: bcm2835: Add devicetree for the Raspberry Pi 3.
dt-bindings: Add root properties for Raspberry Pi 3
ARM: bcm2835: dt: Add the ethernet to the device trees
- update dt with mv-xor-v2 found in the Armada 7K/8K SoCs
- update dt with the clocks found in the Armada 3700 SoCs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAld6y2sACgkQCwYYjhRyO9UU9wCgpZ7Nd5KeqQMuwOPL/RNjIg6F
oHsAoKcUVoQteML8NkpMeyr9Lk+dtb0A
=OElN
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-4.8-1' of git://git.infradead.org/linux-mvebu into next/dt64
Merge "mvebu dt64 for 4.8 (part 1)" from Gregory CLEMENT:
- update dt with mv-xor-v2 found in the Armada 7K/8K SoCs
- update dt with the clocks found in the Armada 3700 SoCs
* tag 'mvebu-dt64-4.8-1' of git://git.infradead.org/linux-mvebu:
arm64: dts: marvell: add peripherals clocks for Armada 37xx
arm64: dts: marvell: add tbg clocks for Armada 37xx
arm64: dts: marvell: Add xtal clock support for Armada 3700
arm64: dts: marvell: add XOR engine description for Armada 7K/8K CP
arm64: dts: marvell: adjust to the latest mv-xor-v2 DT binding
i2c and core io-domain nodes and some reasonable default rates
for core clocks. The rk3368 also gets io-domains for its r88 board
as well as a small fix for the gic's memory regions.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCAAGBQJXdbPUAAoJEPOmecmc0R2BiAUH/2UBBQ1f5A9W5bCtxe+kirFa
R+4tDNske10/h3ey+igciC+6SG4RavHyQn/MoQvu2rzeZvAoPRYi2IVR3/RERf86
uuDNMqI9C0zQNujuiN/1eVMLAhAUoDZ9+uC1uEJ6ilzKwcsk6Sb+8Fo/zQnR8evd
Z4GK+YnJtLvxQ3joEh5AcRbd+CaURjAXeJt1HGlDcLCG8HHKNNDpzaFPV2uaoVXp
1hwx7X8tY5u13K0W7yAzaAq5C4poKa+OpdxlE5g+ryOFWqnqco4l/BBaWg+XK0z5
XvPjtDE5Di8Wpgjeik/4KLwG/maD9ogdPAZGmg+U2SkGlwVdcOSZmSOE2mFHf3c=
=W2eY
-----END PGP SIGNATURE-----
Merge tag 'v4.8-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64
The rk3399 gets support for its emmc controller as well as thermal,
i2c and core io-domain nodes and some reasonable default rates
for core clocks. The rk3368 also gets io-domains for its r88 board
as well as a small fix for the gic's memory regions.
* tag 'v4.8-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: add ap_pwroff and ddrio_pwroff pins for rk3399
arm64: dts: rockchip: Provide emmcclk to PHY for rk3399
arm64: dts: rockchip: Add soc-ctl-syscon to sdhci for rk3399
arm64: dts: rockchip: fixes the gic400 2nd region size for rk3368
arm64: dts: rockchip: add i2c nodes for rk3399
arm64: dts: rockchip: add thermal nodes for rk3399 SoCs
arm64: dts: rockchip: add rk3399 io-domain core nodes
arm64: dts: rockchip: add rk3368-r88 iodomains
arm64: dts: rockchip: add rk3368 io-domain core nodes
arm64: dts: rockchip: make rk3368 grf syscons simple-mfds
arm64: dts: rockchip: enable eMMC for rk3399 EVB
arm64: dts: rockchip: add sdhci/emmc for rk3399
arm64: dts: rockchip: make rk3399's grf a "simple-mfd"
arm64: dts: rockchip: assign default rates for core rk3399 clocks
Signed-off-by: Olof Johansson <olof@lixom.net>
- name the GPIO lines
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=bqGx
-----END PGP SIGNATURE-----
Merge tag 'hi6220-dt-for-4.8' of git://github.com/hisilicon/linux-hisi into next/dt64
ARM64: DT: Hisilicon Hi6220 hikey board updates for 4.8
- name the GPIO lines
* tag 'hi6220-dt-for-4.8' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hikey: name the GPIO lines
Signed-off-by: Olof Johansson <olof@lixom.net>
- Update address-cells and reg properties of cpu nodes, considering
MPIDR_EL1[63:32] bits are not used for CPUs identification on ls1043a
and ls2080a
- Adds the cache nodes and next-level-cache property for ls1043a and
ls2080a to get cacheinfo work on these platforms
- Add dma-coherent for ls1043a PCI nodes to utilize the hardware
capability on data coherency
- Add dis_rxdet_inp3_quirk property for USB3 device to disable rx
detection in P3 PHY mode
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXcm2nAAoJEFBXWFqHsHzO6DAH/05cUGH7SLcJMBV0AVSEfCVK
eQTsriBUNNXcUwt70AUBAymfUkHPNysdN4P+KfReOc0j4FMQKqUB9UttUFItmxd2
plfhkd1wjusV5DqyqQI2Yzp7dsipgJdOoOUc206LISpJ2eaPZrOH0sOXUfZgcZ7h
F4vz5shTGk+zrvBbOd8VmTRizxr7Q1oUYAwOvAHH0DvFUFMfs3+nK8jN7qynBhnB
bdRbNxpNz2kkxrad3mIrKGLjPTBfNyhqTB6jwttwptzqOVxVhK59Kopox5dh2Mha
PvhLes1KYxdpw6CcyyJov7hvleRjKKK8kq08krEBldWeXPHB/GDREuMNg7EcNGU=
=m0V3
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt64
The Freescale arm64 device tree updates for 4.8:
- Update address-cells and reg properties of cpu nodes, considering
MPIDR_EL1[63:32] bits are not used for CPUs identification on ls1043a
and ls2080a
- Adds the cache nodes and next-level-cache property for ls1043a and
ls2080a to get cacheinfo work on these platforms
- Add dma-coherent for ls1043a PCI nodes to utilize the hardware
capability on data coherency
- Add dis_rxdet_inp3_quirk property for USB3 device to disable rx
detection in P3 PHY mode
* tag 'imx-dt64-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: ls2080a: Add cache nodes for cacheinfo support
arm64: dts: ls1043a: Add cache nodes for cacheinfo support
arm64: dts: ls1043a: Add 'dma-coherent' for ls1043a PCI nodes
bindings: PCI: layerscape: Add 'dma-coherent' property
arm64: dts: ls1043a: Add dis_rxdet_inp3_quirk property to USB3 node
arm64: dts: ls2080a: Add dis_rxdet_inp3_quirk property to USB3 node
arm64: dts: fsl: Update address-cells and reg properties of cpu nodes
Signed-off-by: Olof Johansson <olof@lixom.net>
support. Note that it also merges in the ethernet DT changes so that
the Pi3's ethernet can also get the MAC address.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=tOiy
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJXfH9vAAoJEIfQlpxEBwcEkU8P/jZL/E1nIdeToSNGd+Rnbok/
1CqEkx0e5tNr8o2BaslcmQT3QcJg+ioeCTiLqyHBDcg9/IyZZBscUVwa1PjRKt6N
sD2lhE9pz/gZXZnRjeB/DT5Yr4HjGisNK2ldS6KahN4rh077b8RqKIn93z4ToiYb
0q7uQg/tE11k9Y8XVZIzlz6Cz4BYrylkMI/oUAA4gg9kBzUMag/zvFqTSf+jVhke
0D1ekYwrJOdlbkI03XomyRyg58XqDIoWfN2Vn8v8UwS42/dV8LfaziJdWZU8r3gE
WXwzK8Uhcm59/AFxRiQZppx3aBiYUCwZz+OWHzSRPw4ifCvRvmZONQepFJ96Orj9
XYam02xGSSFDigV802kBbeDxF/v8OLQgsWuswkwIYVCdy1pR+Ak1kPYbROCUAP4s
6mhPg8cPHc8hiuGs6XKCz05JOwp+SSrL8qWfaefTI5pWM1or4ygzAeYKR889zUP7
j4JJRyCMCKc0KNkeO6VHnnVCDkDMn6O6X3NNlfzF0QelIxRurXEu/Exhp1xDpk9w
eUHD3rauBF6eJnz/bncmqKGO2m4GlrTMOhE2OLiRoW7i2/bLKkA02tpX56GiuIkK
pUOehuVfCaLfIlXAY+iaUz9w5IuK3VOXkHTUS9MJZEowWT84f51e9+nZhEbwSO/3
0sZU2VtiARV7nPoz2kCN
=4CCL
-----END PGP SIGNATURE-----
Merge tag 'bcm2835-dt-64-next-2016-07-03' into devicetree-arm64/next
This pull request brings in the Raspberry Pi 3 DT for its arm64
support. Note that it also merges in the ethernet DT changes so that
the Pi3's ethernet can also get the MAC address.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Add two new blocks of clocks. The peripheral clocks are the source clocks
of the peripheral of the Armada 3700 SoC.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Add a new block of clocks. The Time Base Generators clocks can be the
parent of the peripheral clocks.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The configuration of the clock depend of the gpio latch. This information
is stored in the gpio block registers. That's why the block is shared
using a syscon node.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This adds basic chip support for MT6755 SoC.
Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This commit adds the Device Tree description for the two XOR engines
found in the CP part of the Armada 7K/8K SoC.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
As suggested by Rob Herring, we should:
1/ Use a SoC-specific compatible string in addition to the more generic
one.
2/ The generic compatible string has been changed from
"marvell,mv-xor-v2" to "marvell,xor-v2".
We simply reflect the changes made to the Device Tree bindings to the
relevant Marvell 7K/8K Device Tree files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This names the GPIO lines on the HiKey board in accordance with
the 96Board Specification for especially the Low Speed External
Connector: "GPIO-A" thru "GPIO-L".
This will make these line names reflect through to userspace
so that they can easily be identified and used with the new
character device ABI.
Some care has been taken to name all lines, not just those used
by the external connectors, also lines that are muxed into some
other function than GPIO: these are named "[FOO]" so that users
can see with lsgpio what all lines are used for.
Cc: devicetree@vger.kernel.org
Cc: John Stultz <john.stultz@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Cc: David Mandala <david.mandala@linaro.org>
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
There are two sleep related pins on rk3399: ap_pwroff and ddrio_pwroff.
Let's add the definition of these two pins to rk3399's main dtsi file so
that boards can use them.
These two pins are similar to the global_pwroff and ddrio_pwroff pins in
rk3288 and are expected to be used in the same way: boards will likely
want to configure these pinctrl settings in their global pinctrl hog
list.
Note that on rk3288 there were two additional pins in the "sleep"
section: "ddr0_retention" and "ddr1_retention". On rk3288 designs these
pins appeared to actually route from rk3288 back to rk3288. Presumably
on rk3399 this is simply not needed since the pins don't appear to exist
there.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch adds support to sdc2 sdhci controller, which is used on some
of the boards.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds pinctrl required for sdhci for external sd card
controller.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds support to blsp2_spi5 device, which is used in some of
the APQ8096 based boards.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds support to blsp1_spi0 which is used on some of APQ8096
based boards.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds support to blsp2_i2c0, which is used on some of the
APQ8096 based boards.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds support to blsp2_i2c0 pinctrl.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds support to blsp2_i2c1, which is used in one of the
apq8096 based boards.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds support to blsp2_i2c1 pinctrl nodes.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds blsp1_i2c2 support, as this bus is used on some of the
apq8096 boards.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds bslp2_uart2 node in soc so that boards that use this
uart can enable it.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds 2pin and 4 pin uart pinctrl support for blsp2_uart1
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds msmgpio label for pin and gpio controller so that
it can referenced in dedicated pins file and other board level gpios.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add the clock controller node for the AmLogic GXBB machine.
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Previous changes in this series allowed exposing the card clock from the
rk3399 SDHCI device and allowed consuming the card clock in the rk3399
eMMC PHY. Hook things up in the main rk3399 dtsi file.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
On rk3399 we'd like to be able to properly set corecfg registers in the
Arasan SDHCI component. Specify the syscon to enable that.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Adds the cache nodes and next-level-cache property for the
cacheinfo to work.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Adds the cache nodes and next-level-cache property for the
cacheinfo to work.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Unit addresses should not have a leading '0x'. Remove them.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Duc Dang <dhdang@apm.com>
The convention in these files is to use lowercase for "0x" prefixes and for
the hex constants themselves, but a few changes didn't follow that
convention, which makes the file annoying to read.
Use lowercase consistently for the hex constants. No functional change
intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Duc Dang <dhdang@apm.com>
- Anup adds nodes for the AHCI and SATA3 PHY peripherals to the Northstar2 SoCs
- Dhanajay enables pinctrl for the Northstar2 SoCs
- Jon Mason enables all of the UART peripherals found in the NS2 SVK and
finally adds the CCI-400 and PMU nodes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=296G
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.8/devicetree-arm64' of http://github.com/Broadcom/stblinux into next/dt64
This pull request contains Device Tree changes for Broadcom ARM64-based SoCS:
- Anup adds nodes for the AHCI and SATA3 PHY peripherals to the Northstar2 SoCs
- Dhanajay enables pinctrl for the Northstar2 SoCs
- Jon Mason enables all of the UART peripherals found in the NS2 SVK and
finally adds the CCI-400 and PMU nodes
* tag 'arm-soc/for-4.8/devicetree-arm64' of http://github.com/Broadcom/stblinux:
arm64: dts: NS2: Add CCI-400 PMU support
arm64: dts: NS2: Add all of the UARTs
arm64: dts: Enable GPIO for Broadcom NS2 SoC
arm64: dts: enable pinctrl for Broadcom NS2 SoC
arm64: dts: Add SATA3 AHCI and SATA3 PHY DT nodes for NS2
dt-bindings: ata: add compatible string for iProc AHCI controller
Signed-off-by: Olof Johansson <olof@lixom.net>
The 2nd additional region is the GIC virtual cpu interface register
base and size.
As the gic400 of rk3368 says, the cpu interface register map as below
:
-0x0000 GICC_CTRL
.
.
.
-0x00fc GICC_IIDR
-0x1000 GICC_IDR
Obviously, the region size should be greater than 0x1000.
So we should make sure to include the GICC_IDR since the kernel will access
it in some cases.
Fixes: b790c2cab5 ("arm64: dts: add Rockchip rk3368 core dtsi and board dts for the r88 board")
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Cc: stable@vger.kernel.org
[added Fixes and stable-cc]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
We've got 9 (count em!) i2c controllers on rk3399, some of which are in
the PMU power domain and some of which are normal peripherals. Add them
all to the main rk3399 dtsi file so future patches can turn them on in
the board dts files.
Note: by default we try to set the i2c clock rate to 200 MHz so that we
can achieve good i2c functional clock rates. 200 MHz gives us the
ability to make very close to 100 kHz / 400 kHz / 1 MHz rates. If
boards want to tune clock rates further they can always override.
Possibly boards could want to tune this if:
- they wanted to save an infinitesimal amount of power and they knew
their i2c bus was slow anyway. Since we gate the functional clock
when the i2c bus is not active, power savings would only be while i2c
transfers were happening and probably won't be very big anyway.
- they wanted to eek out a bit more speed by carefully tuning the source
clock to make divisions work out perfectly, accounting for the rise /
fall time measured on an actual board.
Note also that we still request 200 MHz for the PMU i2c busses even
though we expect that we won't make that exactly (currently PPLL is 676
MHz which gives us 169 MHz).
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
[dianders: wrote desc; put in assigned-clocks; reordered nodes]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The 'dma-coherent' indicates that the hardware IP block can ensure
the coherency of the data transferred from/to the IP block. This
can avoid the software cache flush/invalid actions, and improve
the performance significantly.
The PCI IP block of ls1043a has this capability, so adding this
feature to improve the PCI performance.
Signed-off-by: Liu Gang <Gang.Liu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
