2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 20:53:53 +08:00
Commit Graph

900401 Commits

Author SHA1 Message Date
Chao Yu
61fbae2b2b f2fs: fix to avoid NULL pointer dereference
Unable to handle kernel NULL pointer dereference at virtual address 00000000
PC is at f2fs_free_dic+0x60/0x2c8
LR is at f2fs_decompress_pages+0x3c4/0x3e8
f2fs_free_dic+0x60/0x2c8
f2fs_decompress_pages+0x3c4/0x3e8
__read_end_io+0x78/0x19c
f2fs_post_read_work+0x6c/0x94
process_one_work+0x210/0x48c
worker_thread+0x2e8/0x44c
kthread+0x110/0x120
ret_from_fork+0x10/0x18

In f2fs_free_dic(), we can not use f2fs_put_page(,1) to release dic->tpages[i],
as the page's mapping is NULL.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-02-27 10:16:45 -08:00
Eric Biggers
7fa6d59816 f2fs: fix leaking uninitialized memory in compressed clusters
When the compressed data of a cluster doesn't end on a page boundary,
the remainder of the last page must be zeroed in order to avoid leaking
uninitialized memory to disk.

Fixes: 4c8ff7095b ("f2fs: support data compression")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-02-27 10:16:44 -08:00
Sahitya Tummala
bf22c3cc8c f2fs: fix the panic in do_checkpoint()
There could be a scenario where f2fs_sync_meta_pages() will not
ensure that all F2FS_DIRTY_META pages are submitted for IO. Thus,
resulting in the below panic in do_checkpoint() -

f2fs_bug_on(sbi, get_pages(sbi, F2FS_DIRTY_META) &&
				!f2fs_cp_error(sbi));

This can happen in a low-memory condition, where shrinker could
also be doing the writepage operation (stack shown below)
at the same time when checkpoint is running on another core.

schedule
down_write
f2fs_submit_page_write -> by this time, this page in page cache is tagged
			as PAGECACHE_TAG_WRITEBACK and PAGECACHE_TAG_DIRTY
			is cleared, due to which f2fs_sync_meta_pages()
			cannot sync this page in do_checkpoint() path.
f2fs_do_write_meta_page
__f2fs_write_meta_page
f2fs_write_meta_page
shrink_page_list
shrink_inactive_list
shrink_node_memcg
shrink_node
kswapd

Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-02-27 10:16:44 -08:00
Chao Yu
dc5a941223 f2fs: fix to wait all node page writeback
There is a race condition that we may miss to wait for all node pages
writeback, fix it.

- fsync()				- shrink
 - f2fs_do_sync_file
					 - __write_node_page
					  - set_page_writeback(page#0)
					  : remove DIRTY/TOWRITE flag
  - f2fs_fsync_node_pages
  : won't find page #0 as TOWRITE flag was removeD
  - f2fs_wait_on_node_pages_writeback
  : wont' wait page #0 writeback as it was not in fsync_node_list list.
					   - f2fs_add_fsync_node_entry

Fixes: 50fa53eccf ("f2fs: fix to avoid broken of dnode block list")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2020-02-27 10:16:44 -08:00
Linus Torvalds
b19e8c6847 arm64 fixes for -rc2
- Fix build when KASLR is enabled but CONFIG_ARCH_RANDOM is not set
 
 - Fix context-switching of SSBS state on systems that implement it
 
 - Fix spinlock compiler warning introduced during the merge window
 
 - Fix incorrect header inclusion (linux/clk-provider.h)
 
 - Use SYSCTL_{ZERO,ONE} instead of rolling our own static variables
 
 - Don't scream if optional SMMUv3 PMU irq is missing
 
 - Remove some unused function prototypes
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl5FWgUQHHdpbGxAa2Vy
 bmVsLm9yZwAKCRC3rHDchMFjNHN3CACHwCJyfwTCo3A8+rKpMK29FE8CciheqPbz
 hsPuS7UIYYv8yXLeOGD9d2Jplg2gqx/kWVLh4rm6KvPbaMvSJW++HPbiMy1dMWrw
 xUPofQjvXajv2iOzXLonVRXF+gtLbHIYLpsUIpkg1IFZNnjRPzUW0wAqyMBwHhB7
 WKoWRs+6wyGbfC1e9ZDZ5nmiyixoH3j5AZs6LN1hdkxGudc6M7FxutSgarcncxNH
 k5QGKo7cdAaNduIpHUE6VCDxu+5FwHADPvY7x/aq5tyJ5vxn0CnoXL9WCofMfZ3t
 X0U3VIwtGTgOrbTe29WYpy/SQtau63Yq/n96Tw7fXLvDmNSZQ/RT
 =mOtY
 -----END PGP SIGNATURE-----

Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:
 "Summary below, but it's all reasonably straightforward. There are some
  more fixes on the horizon, but nothing disastrous yet.

  Summary:

   - Fix build when KASLR is enabled but CONFIG_ARCH_RANDOM is not set

   - Fix context-switching of SSBS state on systems that implement it

   - Fix spinlock compiler warning introduced during the merge window

   - Fix incorrect header inclusion (linux/clk-provider.h)

   - Use SYSCTL_{ZERO,ONE} instead of rolling our own static variables

   - Don't scream if optional SMMUv3 PMU irq is missing

   - Remove some unused function prototypes"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: time: Replace <linux/clk-provider.h> by <linux/of_clk.h>
  arm64: Fix CONFIG_ARCH_RANDOM=n build
  perf/smmuv3: Use platform_get_irq_optional() for wired interrupt
  arm64/spinlock: fix a -Wunused-function warning
  arm64: ssbs: Fix context-switch when SSBS is present on all CPUs
  arm64: use shared sysctl constants
  arm64: Drop do_el0_ia_bp_hardening() & do_sp_pc_abort() declarations
2020-02-13 14:36:57 -08:00
Linus Torvalds
1d40890aae GPIO fixes for the v5.6 kernel cycle:
- Revert two patches to gpio_do_set_config() and implement
   the proper solution that works, also drop an unecessary
   call in set_config()
 
 - Fix up the lockdep class for hierarchical IRQ domains.
 
 - Remove some bridge code for line directions.
 
 - Fix a register access bug in the Xilinx driver.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl5FOqQACgkQQRCzN7AZ
 XXNjYBAAkngeRE12fWjXXRNnkoMVXh0IzvkqKXn2fi+8Kvh7rnIaSLF08Yi/yMYd
 FXTWj2coXH7rjyYs4zy0W2dZIXRAlcqEZi4I2WqsQQMvS7rKNqoGeF1yD37JOjQE
 gDIsnzJJ3dM1YjO7gWKQCbPSXi9T2sZPfp1EI3q16QXdVuIGqMVE90gqbESb5sJ8
 vxdtNf+S+mqwsHLbNzLGGVgkQsgrh5+hmiTe36L0DZXwFAd5f2i8EehBtpTEXBVR
 7u+oGun0Ds9IYfoN1puchNfPvis6xQdaBSpU4eNKx/7SKwesSahgUF276v0MJkpC
 tVWJvNLXgDCb9DqkDIB1ZiurieaAMlFVZ5+kxZ1kBv9M5vsuzzjH9AVMGsp73Bl7
 v75hu4gwvNXYlLXoGkwtFrJqQqhiZRxwTiWOu2uwWoc2sVm+xq8aCQY5o/h3n2qh
 uqfZ/8QqM/6m8P/KH6YOqie95LR9F20Uxx912afA3RhpKGWVbpOFd3P5hq+BygjI
 uU/t6k54sV2nPDRBijMa53m0R5Ns5rF4RJ6ZaQ7q2q6q0vO9YsCKMlhPZPnQRxAV
 LT0P/WxH2+4qAcyUsf1SAQdRXlw+zecEhF9JRsGAlMe7iFjvCiRm27GAtTT+TeSq
 vhKWOpqdHvdTl0Fo84cnakISGh4yO+hxaogBQxQ4rCY92FDatyc=
 =V1Dp
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO fixes from Linus Walleij:

 - Revert two patches to gpio_do_set_config() and implement the proper
   solution that works, also drop an unecessary call in set_config()

 - Fix up the lockdep class for hierarchical IRQ domains.

 - Remove some bridge code for line directions.

 - Fix a register access bug in the Xilinx driver.

* tag 'gpio-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: sifive: fix static checker warning
  spmi: pmic-arb: Set lockdep class for hierarchical irq domains
  gpio: xilinx: Fix bug where the wrong GPIO register is written to
  gpiolib: remove unnecessary argument from set_config call
  gpio: bd71828: Remove unneeded defines for GPIO_LINE_DIRECTION_IN/OUT
  MAINTAINERS: Sort entries in database for GPIO
  gpiolib: fix gpio_do_set_config()
  Revert "gpiolib: remove set but not used variable 'config'"
  Revert "gpiolib: Remove duplicated function gpio_do_set_config()"
2020-02-13 14:34:58 -08:00
Linus Torvalds
64ae1342f8 Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
 "This fixes a Kconfig anomaly when lib/crypto is enabled without Crypto
  API"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: Kconfig - allow tests to be disabled when manager is disabled
2020-02-13 14:17:39 -08:00
Randy Dunlap
0bf999f9c5 linux/pipe_fs_i.h: fix kernel-doc warnings after @wait was split
Fix kernel-doc warnings in struct pipe_inode_info after @wait was
split into @rd_wait and @wr_wait.

  include/linux/pipe_fs_i.h:66: warning: Function parameter or member 'rd_wait' not described in 'pipe_inode_info'
  include/linux/pipe_fs_i.h:66: warning: Function parameter or member 'wr_wait' not described in 'pipe_inode_info'

Fixes: 0ddad21d3e ("pipe: use exclusive waits when reading or writing")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-12 11:54:08 -08:00
Linus Torvalds
f2850dd5ee Kbuild fixes for v5.6
- fix memory corruption in scripts/kallsyms
 
  - fix the vmlinux link stage to correctly update compile.h
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl5EH2wVHG1hc2FoaXJv
 eUBrZXJuZWwub3JnAAoJED2LAQed4NsGX/UP/0j/U3FxvLba8Ke/hIObdfZQyuhp
 kxvhq4+Mgylx9JQ84nME5HlFpoW83qyvLQGcEnj5yErMiYfOX62h8TPVKjMg5tvu
 w5Wik777pc0bAbrwBCzmO19rDzWX7TH/Gg0HrmgsZFNynF/mlFXVYtCJ0cIgmzxH
 zI9W/UpZX9Mns7gzdn0kig50KoidcdgH3W78KApCBrMK75KC3E4qSWumm11ToCGe
 Yh4n/TsqWhsMdJpnZRYIZq144bOHGvTqj62fgR3UgOIp4fgYEQZ1Eh/phMFu3YXm
 63nr5tx7lsRIb1RrFg9rljktEUAB9I9Nia9+Dpp8lDGnifciZFnyZm6mee0c8RzE
 NMD3FMjp+jSE9LfahdkrunPepI1vlsS0XQbRlSOTu26lEZiYOHiYZomE2Z1Jt5bf
 ancQJUMoQ2rRWAN816r1p2+CiRn/kRI0vWtxJmQylHx5AIN9Gaw6bF1/b67C3jVn
 QNrS7i0nsVZ45tUuzVDxwUMtsqRzS892Me0WvEua2vd53623qiVQnLeyIACdg40X
 HzgF8Q3EChyjR5248x7C4q0Vr3srwUIgHcPHM3I64dmCXAVGOH1G62V7s1BqZ3w7
 74xKy8RsCmpmODOvMSUMajBqouXR9LtXe+vcoECMjksvRbv5DQYHjM52lmBHROYq
 Qg/98qM7Lhr9MH0E
 =4lc5
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-fixes-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - fix memory corruption in scripts/kallsyms

 - fix the vmlinux link stage to correctly update compile.h

* tag 'kbuild-fixes-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: fix mismatch between .version and include/generated/compile.h
  scripts/kallsyms: fix memory corruption caused by write over-run
2020-02-12 10:28:42 -08:00
Geert Uytterhoeven
d91771848f arm64: time: Replace <linux/clk-provider.h> by <linux/of_clk.h>
The arm64 time code is not a clock provider, and just needs to call
of_clk_init().

Hence it can include <linux/of_clk.h> instead of <linux/clk-provider.h>.

Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Will Deacon <will@kernel.org>
2020-02-12 17:26:38 +00:00
Linus Torvalds
359c92c02b dax fixes 5.6-rc1
- Fix RWF_NOWAIT writes to properly return -EAGAIN
 
 - Clean up an unused helper
 
 - Update dax_writeback_mapping_range to not need a block_device argument
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEf41QbsdZzFdA8EfZHtKRamZ9iAIFAl5DH00ACgkQHtKRamZ9
 iAIPUA/+KHTrnE4Pb69d1r/wmdNOQE1vCpZxN606ozfzAMIfCgzw6i7V82xpFUyZ
 VdQ1wcCSYLoPTQ+y/0Bk7SQlLjBx58c0ShaOTHmE2IRdYwzKMOBtwqy5vxGYWT/i
 k2b44Xdwc4x8KMdajKCZlZOWNIM4BnlhE6nqnyL7Zv7J4BC71IKTCgh0WrriKvKe
 t7IkYK6fLWx9Y64UhcIoXL9jDp1r5N/pJCjKaSfpS7gH+iqz/M3NaAwRfDr8UuIY
 aHUUoPHP/cbwakQnYZtpxGaP1dzkKQ1FG3nL74Lp2XUOulivSbGa0fmw/7Vs18Of
 M2d8/yKWMh0pElPdoh/2ORhHAcMOsIUCx3HRxMm1x6g293BkE96ESpbN/s62oo7H
 uND3AOqnE79jxd6AqECHyYXGpxwlHah5HXZdCjU5b6rmNbz9YNpHGK8STwpa2ReL
 AnYpWlDPjUkSMAD/rzwR7T6xh4TlzYQa2y6QR3HyffftPg6Dm0g4I8pBi0PVZYBB
 4Whg8dLsiK73KZsjhraPaSFFDT42Btd6BHKLrMLckoVoIoyt3EB4FPwMQjCwXgqI
 WySehmiMfEqXWUEKsYxBf+j0+ASC5ewIKuP1Ziqxa9kBel7964my7ariGn/mEAbo
 yJ6Iyn+wEeLE5VhImZKxrBNqNPo6mripT6omJmgl2G2HZt+JfK4=
 =ZA5Y
 -----END PGP SIGNATURE-----

Merge tag 'dax-fixes-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull dax fixes from Dan Williams:
 "A fix for an xfstest failure and some and an update that removes an
  fsdax dependency on block devices.

  Summary:

   - Fix RWF_NOWAIT writes to properly return -EAGAIN

   - Clean up an unused helper

   - Update dax_writeback_mapping_range to not need a block_device
     argument"

* tag 'dax-fixes-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  dax: pass NOWAIT flag to iomap_apply
  dax: Get rid of fs_dax_get_by_host() helper
  dax: Pass dax_dev instead of bdev to dax_writeback_mapping_range()
2020-02-11 16:52:08 -08:00
Linus Torvalds
61a7595403 Various fixes:
- Fix an uninitialized variable
 
  - Fix compile bug to bootconfig userspace tool (in tools directory)
 
  - Suppress some error messages of bootconfig userspace tool
 
  - Remove unneded CONFIG_LIBXBC from bootconfig
 
  - Allocate bootconfig xbc_nodes dynamically.
    To ease complaints about taking up static memory at boot up
 
  - Use of parse_args() to parse bootconfig instead of strstr() usage
    Prevents issues of double quotes containing the interested string
 
  - Fix missing ring_buffer_nest_end() on synthetic event error path
 
  - Return zero not -EINVAL on soft disabled synthetic event
    (soft disabling must be the same as hard disabling, which returns zero)
 
  - Consolidate synthetic event code (remove duplicate code)
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXkMTwRQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qnJQAQD5aKiD6jx+zGtLsFTuZMcEGvhhUuJ6
 oUaSvhKO3UqezwD/V5avKuuC0wWt//gOWDY+0+4QNjmvn1GLnaNYohs6fg0=
 =NLT9
 -----END PGP SIGNATURE-----

Merge tag 'trace-v5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
 "Various fixes:

   - Fix an uninitialized variable

   - Fix compile bug to bootconfig userspace tool (in tools directory)

   - Suppress some error messages of bootconfig userspace tool

   - Remove unneded CONFIG_LIBXBC from bootconfig

   - Allocate bootconfig xbc_nodes dynamically. To ease complaints about
     taking up static memory at boot up

   - Use of parse_args() to parse bootconfig instead of strstr() usage
     Prevents issues of double quotes containing the interested string

   - Fix missing ring_buffer_nest_end() on synthetic event error path

   - Return zero not -EINVAL on soft disabled synthetic event (soft
     disabling must be the same as hard disabling, which returns zero)

   - Consolidate synthetic event code (remove duplicate code)"

* tag 'trace-v5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Consolidate trace() functions
  tracing: Don't return -EINVAL when tracing soft disabled synth events
  tracing: Add missing nest end to synth_event_trace_start() error case
  tools/bootconfig: Suppress non-error messages
  bootconfig: Allocate xbc_nodes array dynamically
  bootconfig: Use parse_args() to find bootconfig and '--'
  tracing/kprobe: Fix uninitialized variable bug
  bootconfig: Remove unneeded CONFIG_LIBXBC
  tools/bootconfig: Fix wrong __VA_ARGS__ usage
2020-02-11 16:39:18 -08:00
Robin Murphy
74a44bed8d arm64: Fix CONFIG_ARCH_RANDOM=n build
The entire asm/archrandom.h header is generically included via
linux/archrandom.h only when CONFIG_ARCH_RANDOM is already set, so the
stub definitions of __arm64_rndr() and __early_cpu_has_rndr() are only
visible to KASLR if it explicitly includes the arch-internal header.

Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
2020-02-11 09:47:01 +00:00
Tom Zanussi
7276531d40 tracing: Consolidate trace() functions
Move the checking, buffer reserve and buffer commit code in
synth_event_trace_start/end() into inline functions
__synth_event_trace_start/end() so they can also be used by
synth_event_trace() and synth_event_trace_array(), and then have all
those functions use them.

Also, change synth_event_trace_state.enabled to disabled so it only
needs to be set if the event is disabled, which is not normally the
case.

Link: http://lkml.kernel.org/r/b1f3108d0f450e58192955a300e31d0405ab4149.1581374549.git.zanussi@kernel.org

Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-10 22:00:21 -05:00
Tom Zanussi
0c62f6cd9e tracing: Don't return -EINVAL when tracing soft disabled synth events
There's no reason to return -EINVAL when tracing a synthetic event if
it's soft disabled - treat it the same as if it were hard disabled and
return normally.

Have synth_event_trace() and synth_event_trace_array() just return
normally, and have synth_event_trace_start set the trace state to
disabled and return.

Link: http://lkml.kernel.org/r/df5d02a1625aff97c9866506c5bada6a069982ba.1581374549.git.zanussi@kernel.org

Fixes: 8dcc53ad95 ("tracing: Add synth_event_trace() and related functions")
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-10 22:00:13 -05:00
Tom Zanussi
d090409abb tracing: Add missing nest end to synth_event_trace_start() error case
If the ring_buffer reserve in synth_event_trace_start() fails, the
matching ring_buffer_nest_end() should be called in the error code,
since nothing else will ever call it in this case.

Link: http://lkml.kernel.org/r/20abc444b3eeff76425f895815380abe7aa53ff8.1581374549.git.zanussi@kernel.org

Fixes: 8dcc53ad95 ("tracing: Add synth_event_trace() and related functions")
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-10 21:58:19 -05:00
Linus Torvalds
0a679e13ea Merge branch 'for-5.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fix from Tejun Heo:
 "I made a mistake while removing cgroup task list lazy init
  optimization making the root cgroup.procs show entries for the
  init_tasks. The zero entries doesn't cause critical failures but does
  make systemd print out warning messages during boot.

  Fix it by omitting init_tasks as they should be"

* 'for-5.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: init_tasks shouldn't be linked to the root cgroup
2020-02-10 17:07:05 -08:00
Linus Torvalds
a5650acb5f selinux/stable-5.6 PR 20200210
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAl5ByJYUHHBhdWxAcGF1
 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXMNLg/+Nj3gdWa5z0lsFuvUs87uM4HYHLtp
 9/wENEaqy7W92LAAEW5y+6sK8Pm9/CO3xf2d40SAr/xjwBo2Fbnfmx7QwDMUCQS6
 vyrLDiikSMyFU5j1AQDFuWjWF36FZlfqix+oXMETJ1tqxjIFxFN+rvbsDICPiQTl
 VxBG4CWWzNtSllYDDj3KYcVaGzNb3nleb8n436gFoHS++12BaypVA0kBlV3BqzPi
 mC0+gDuY06hwFmc/tAl8WndRwZpJ71rgsKJ5opgel61Zxf1J39QdTxeap9hhldJl
 5FbtoiGpnMXtHzpRGh6BHag/2gGX/0+J+t8ZATuk4GRtt1ueyYw9kNnAMblooJSV
 TwJlv1LLIKpAmSSJnKoN1AUAsxhS3dAmVyPuYWtmqEq8wq7YEYi5UnK1fH4ziI+b
 5LmYD0D/FoNE1Dr1TV78HmM9i0+AteH5FhkS0V6GD3v+wO6vCb3hTYaQpMWhhgnY
 /SEWbvLUO1fvQoKA8GT3UtmiUFdrqvrQFoL/l3weo9tvfyG3Walxo8s0w0r/DVUH
 AevIhUVi+snSLhI95fF26wskrZtEE9gwl/BoMjfKse0HK2t77xBE3kZW88NnSXOU
 Wk+ozfgibCnzk/Do/Y4iRr9GbgmCfscjOqlq1Yzyt/ZkUsG2egWHMzpritnzVEio
 NSQ6n6kpbkRgkHc=
 =0cTj
 -----END PGP SIGNATURE-----

Merge tag 'selinux-pr-20200210' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux

Pull SELinux fixes from Paul Moore:
 "Two small fixes: one fixes a locking problem in the recently merged
  label translation code, the other fixes an embarrassing 'binderfs' /
  'binder' filesystem name check"

* tag 'selinux-pr-20200210' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: fix sidtab string cache locking
  selinux: fix typo in filesystem name
2020-02-10 16:51:35 -08:00
Masami Hiramatsu
9737800111 tools/bootconfig: Suppress non-error messages
Suppress non-error messages when applying new bootconfig
to initrd image. To enable it, replace printf for error
message with pr_err() macro.
This also adds a testcase for this fix.

Link: http://lkml.kernel.org/r/158125351377.16911.13283712972275131160.stgit@devnote2

Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-10 17:22:56 -05:00
Masami Hiramatsu
a91e4f12ff bootconfig: Allocate xbc_nodes array dynamically
To reduce the large static array from kernel data, allocate
xbc_nodes array dynamically only if the kernel loads a
bootconfig.

Note that this also add dummy memblock.h for user-spacae
bootconfig tool.

Link: http://lkml.kernel.org/r/158108569699.3187.6512834527603883707.stgit@devnote2

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-10 17:19:39 -05:00
Masahiro Yamada
083bc0e1ce kbuild: fix mismatch between .version and include/generated/compile.h
Since commit 56d5893615 ("kbuild: do not create orphan built-in.a or
obj-y objects"), scripts/link-vmlinux.sh does nothing when descending
into init/.

Once the version number becomes out of sync between .version and
include/generated/compile.h, it is not self-healing.

[How to reproduce]

 $ echo 100 > .version
 $ make

You will see the number in the .version is always bigger than that in
compile.h by one. After this, every time you run 'make', the vmlinux is
re-linked even when none of source files is updated.

Fixes: 56d5893615 ("kbuild: do not create orphan built-in.a or obj-y objects")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-02-11 05:18:40 +09:00
Masahiro Yamada
9d1b38958b scripts/kallsyms: fix memory corruption caused by write over-run
memcpy() writes one more byte than allocated.

Fixes: 8d60526999 ("scripts/kallsyms: change table to store (strcut sym_entry *)")
Reported-by: youling257 <youling257@gmail.com>
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
2020-02-11 05:18:09 +09:00
John Garry
0ca2c0319a perf/smmuv3: Use platform_get_irq_optional() for wired interrupt
Even though a SMMUv3 PMCG implementation may use an MSI as the form of
interrupt source, the kernel would still complain that it does not find
the wired (GSIV) interrupt in this case:

root@(none)$ dmesg | grep arm-smmu-v3-pmcg | grep "not found"
[   59.237219] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.8.auto: IRQ index 0 not found
[   59.322841] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.9.auto: IRQ index 0 not found
[   59.422155] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.10.auto: IRQ index 0 not found
[   59.539014] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.11.auto: IRQ index 0 not found
[   59.640329] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.12.auto: IRQ index 0 not found
[   59.743112] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.13.auto: IRQ index 0 not found
[   59.880577] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.14.auto: IRQ index 0 not found
[   60.017528] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.15.auto: IRQ index 0 not found

Use platform_get_irq_optional() to silence the warning.

If neither interrupt source is found, then the driver will still warn that
IRQ setup errored and the probe will fail.

Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
2020-02-10 18:14:46 +00:00
Steven Rostedt (VMware)
f61872bb58 bootconfig: Use parse_args() to find bootconfig and '--'
The current implementation does a naive search of "bootconfig" on the kernel
command line. But this could find "bootconfig" that is part of another
option in quotes (although highly unlikely). But it also needs to find '--'
on the kernel command line to know if it should append a '--' or not when a
bootconfig in the initrd file has an "init" section. The check uses the
naive strstr() to find to see if it exists. But this can return a false
positive if it exists in an option and then the "init" section in the initrd
will not be appended properly.

Using parse_args() to find both of these will solve both of these problems.

Link: https://lore.kernel.org/r/202002070954.C18E7F58B@keescook

Fixes: 7495e0926f ("bootconfig: Only load bootconfig if "bootconfig" is on the kernel cmdline")
Fixes: 1319916209 ("bootconfig: init: Allow admin to use bootconfig for init command line")
Reported-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-10 12:07:42 -05:00
Gustavo A. R. Silva
10f129cb59 tracing/kprobe: Fix uninitialized variable bug
There is a potential execution path in which variable *ret* is returned
without being properly initialized, previously.

Fix this by initializing variable *ret* to 0.

Link: http://lkml.kernel.org/r/20200205223404.GA3379@embeddedor

Addresses-Coverity-ID: 1491142 ("Uninitialized scalar variable")
Fixes: 2a588dd1d5 ("tracing: Add kprobe event command generation functions")
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-10 12:07:42 -05:00
Masami Hiramatsu
26445f98ea bootconfig: Remove unneeded CONFIG_LIBXBC
Since there is no user except CONFIG_BOOT_CONFIG and no plan
to use it from other functions, CONFIG_LIBXBC can be removed
and we can use CONFIG_BOOT_CONFIG directly.

Link: http://lkml.kernel.org/r/158098769281.939.16293492056419481105.stgit@devnote2

Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-10 12:07:42 -05:00
Masami Hiramatsu
17d25ae7f1 tools/bootconfig: Fix wrong __VA_ARGS__ usage
Since printk() wrapper macro uses __VA_ARGS__ without "##" prefix, it causes
a build error if there is no variable arguments (e.g. only fmt is
specified.) To fix this error, use ##__VA_ARGS__ instead of __VAR_ARGS__.

Link: http://lkml.kernel.org/r/158108370130.2758.10893830923800978011.stgit@devnote2

Fixes: 950313ebf7 ("tools: bootconfig: Add bootconfig command")
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-10 12:06:43 -05:00
Yash Shah
a924eae751 gpio: sifive: fix static checker warning
Typcasting "irq_state" leads to the below static checker warning:
The fix is to declare "irq_state" as unsigned long instead of u32.

	drivers/gpio/gpio-sifive.c:97 sifive_gpio_irq_enable()
	warn: passing casted pointer '&chip->irq_state' to
	'assign_bit()' 32 vs 64.

Fixes: 96868dce64 ("gpio/sifive: Add GPIO driver for SiFive SoCs")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Yash Shah <yash.shah@sifive.com>
Link: https://lore.kernel.org/r/1580189061-14091-1-git-send-email-yash.shah@sifive.com
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-02-10 13:54:17 +01:00
Stephen Boyd
2d5a2f913b spmi: pmic-arb: Set lockdep class for hierarchical irq domains
I see the following lockdep splat in the qcom pinctrl driver when
attempting to suspend the device.

 WARNING: possible recursive locking detected
 5.4.11 #3 Tainted: G        W
 --------------------------------------------
 cat/3074 is trying to acquire lock:
 ffffff81f49804c0 (&irq_desc_lock_class){-.-.}, at: __irq_get_desc_lock+0x64/0x94

 but task is already holding lock:
 ffffff81f1cc10c0 (&irq_desc_lock_class){-.-.}, at: __irq_get_desc_lock+0x64/0x94

 other info that might help us debug this:
  Possible unsafe locking scenario:

        CPU0
        ----
   lock(&irq_desc_lock_class);
   lock(&irq_desc_lock_class);

  *** DEADLOCK ***

  May be due to missing lock nesting notation

 6 locks held by cat/3074:
  #0: ffffff81f01d9420 (sb_writers#7){.+.+}, at: vfs_write+0xd0/0x1a4
  #1: ffffff81bd7d2080 (&of->mutex){+.+.}, at: kernfs_fop_write+0x12c/0x1fc
  #2: ffffff81f4c322f0 (kn->count#337){.+.+}, at: kernfs_fop_write+0x134/0x1fc
  #3: ffffffe411a41d60 (system_transition_mutex){+.+.}, at: pm_suspend+0x108/0x348
  #4: ffffff81f1c5e970 (&dev->mutex){....}, at: __device_suspend+0x168/0x41c
  #5: ffffff81f1cc10c0 (&irq_desc_lock_class){-.-.}, at: __irq_get_desc_lock+0x64/0x94

 stack backtrace:
 CPU: 5 PID: 3074 Comm: cat Tainted: G        W         5.4.11 #3
 Hardware name: Google Cheza (rev3+) (DT)
 Call trace:
  dump_backtrace+0x0/0x174
  show_stack+0x20/0x2c
  dump_stack+0xc8/0x124
  __lock_acquire+0x460/0x2388
  lock_acquire+0x1cc/0x210
  _raw_spin_lock_irqsave+0x64/0x80
  __irq_get_desc_lock+0x64/0x94
  irq_set_irq_wake+0x40/0x144
  qpnpint_irq_set_wake+0x28/0x34
  set_irq_wake_real+0x40/0x5c
  irq_set_irq_wake+0x70/0x144
  pm8941_pwrkey_suspend+0x34/0x44
  platform_pm_suspend+0x34/0x60
  dpm_run_callback+0x64/0xcc
  __device_suspend+0x310/0x41c
  dpm_suspend+0xf8/0x298
  dpm_suspend_start+0x84/0xb4
  suspend_devices_and_enter+0xbc/0x620
  pm_suspend+0x210/0x348
  state_store+0xb0/0x108
  kobj_attr_store+0x14/0x24
  sysfs_kf_write+0x4c/0x64
  kernfs_fop_write+0x15c/0x1fc
  __vfs_write+0x54/0x18c
  vfs_write+0xe4/0x1a4
  ksys_write+0x7c/0xe4
  __arm64_sys_write+0x20/0x2c
  el0_svc_common+0xa8/0x160
  el0_svc_handler+0x7c/0x98
  el0_svc+0x8/0xc

Set a lockdep class when we map the irq so that irq_set_wake() doesn't
warn about a lockdep bug that doesn't exist.

Fixes: 12a9eeaebb ("spmi: pmic-arb: convert to v2 irq interfaces to support hierarchical IRQ chips")
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Brian Masney <masneyb@onstation.org>
Cc: Lina Iyer <ilina@codeaurora.org>
Cc: Maulik Shah <mkshah@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200121183748.68662-1-swboyd@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-02-10 13:16:04 +01:00
Paul Thomas
c3afa804c5 gpio: xilinx: Fix bug where the wrong GPIO register is written to
Care is taken with "index", however with the current version
the actual xgpio_writereg is using index for data but
xgpio_regoffset(chip, i) for the offset. And since i is already
incremented it is incorrect. This patch fixes it so that index
is used for the offset too.

Cc: stable@vger.kernel.org
Signed-off-by: Paul Thomas <pthomas8589@gmail.com>
Link: https://lore.kernel.org/r/20200125221410.8022-1-pthomas8589@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-02-10 12:52:34 +01:00
Linus Walleij
dee7c111a4 gpio fixes for v5.6-rc2
- fix a regression introduced by gpio_do_set_config()
 - sort GPIO entries in MAINTAINERS
 - remove leftover defines in gpio-bd71828
 - remove an redundant switch case in gpio_set_config()
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAl5BMEcACgkQEacuoBRx
 13KGXRAA0r8j7q55pMh/c3aMyVrzC0EhlIR7C51zRZNxXbim5tfOOdCdvZYk1hkO
 YxdC/rYME+ohD5YuiFhcwylQUWNhuA8zI29TYW2P2/rDhsezcXNGTHz7kTOgf/XY
 vw5xImNhCWq+pEV6vR68iLjpn+U67zMa2IF4TgEm2vM1feLlcgaiu4oKbyqQgiw0
 O2Gjy83zrKQjfLviw6kvQn6pm8YU+KEW0pKLhW2EsxeDfRr250w5oAagMX0Zyp0K
 u8McezbkyVfsAhEzpOPAeWfY8C9FDJl45dKXAYky8sAGYpGFE7Efh0hwWCAb79lZ
 vwpOGi5Dp/Q4qJowc1oAwjJrw8VRoRXPbOLoo3JPKRd/cS5YBX2PslKAJQ835utv
 74pvGMf4k2F0r3mwY4KOwt/CxIRzD11dysn4Ue+AAF1H2riUHfmGCkYjFzJh8G6C
 X11RH7hluE3UEvf/d7Uw0sJEM8GITKD8Q6TWy2vpNlUVq2xN7ilLMtVguhOmAkLa
 6IVefjW2tlX8YGNXwqQwL5nSKtFGNKNqY+tBlCBfJs2U+FxKduHzZtJD0ao6G44I
 8LJTjpKiKbkw8KdYu3hvhMCFAi+gAbaREQmXqvKJNwU8u5LNPHeTBt3spHNsXghY
 0I0owJmCiENjVgsG6ZEoRfwdGkKIcjl0IXbRSHA6jWq2bZQdwk4=
 =I8M6
 -----END PGP SIGNATURE-----

Merge tag 'gpio-fixes-for-v5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into fixes

gpio fixes for v5.6-rc2

- fix a regression introduced by gpio_do_set_config()
- sort GPIO entries in MAINTAINERS
- remove leftover defines in gpio-bd71828
- remove an redundant switch case in gpio_set_config()
2020-02-10 12:47:26 +01:00
Qian Cai
345d52c184 arm64/spinlock: fix a -Wunused-function warning
The commit f5bfdc8e39 ("locking/osq: Use optimized spinning loop for
arm64") introduced a warning from Clang because vcpu_is_preempted() is
compiled away,

kernel/locking/osq_lock.c:25:19: warning: unused function 'node_cpu'
[-Wunused-function]
static inline int node_cpu(struct optimistic_spin_node *node)
                  ^
1 warning generated.

Fix it by converting vcpu_is_preempted() to a static inline function.

Fixes: f5bfdc8e39 ("locking/osq: Use optimized spinning loop for arm64")
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Will Deacon <will@kernel.org>
2020-02-10 11:29:24 +00:00
Will Deacon
fca3d33d8a arm64: ssbs: Fix context-switch when SSBS is present on all CPUs
When all CPUs in the system implement the SSBS extension, the SSBS field
in PSTATE is the definitive indication of the mitigation state. Further,
when the CPUs implement the SSBS manipulation instructions (advertised
to userspace via an HWCAP), EL0 can toggle the SSBS field directly and
so we cannot rely on any shadow state such as TIF_SSBD at all.

Avoid forcing the SSBS field in context-switch on such a system, and
simply rely on the PSTATE register instead.

Cc: <stable@vger.kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Srinivas Ramana <sramana@codeaurora.org>
Fixes: cbdf8a189a ("arm64: Force SSBS on context switch")
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
2020-02-10 11:29:02 +00:00
Matteo Croce
2c614c1194 arm64: use shared sysctl constants
Use shared sysctl variables for zero and one constants, as in
commit eec4844fae ("proc/sysctl: add shared variables for range check")

Fixes: 63f0c60379 ("arm64: Introduce prctl() options to control the tagged user addresses ABI")
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Will Deacon <will@kernel.org>
2020-02-10 11:24:57 +00:00
Anshuman Khandual
5cb7a1113f arm64: Drop do_el0_ia_bp_hardening() & do_sp_pc_abort() declarations
There is a redundant do_sp_pc_abort() declaration in exceptions.h which can
be removed. Also do_el0_ia_bp_hardening() as been already been dropped with
the commit bfe298745a ("arm64: entry-common: don't touch daif before
bp-hardening") and hence does not need a declaration any more. This should
not introduce any functional change.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
2020-02-10 11:24:49 +00:00
Kent Gibson
8131b73b22 gpiolib: remove unnecessary argument from set_config call
Remove unnecessary argument when setting PIN_CONFIG_BIAS_DISABLE. No
argument is expected by pinctrl, so removing it should be harmless.

Fixes: 2148ad7790 ("gpiolib: add support for disabling line bias")
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-02-10 10:55:18 +01:00
Axel Lin
4d0cabbb8b gpio: bd71828: Remove unneeded defines for GPIO_LINE_DIRECTION_IN/OUT
They are defined in gpio/driver.h now.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-02-10 10:55:18 +01:00
Andy Shevchenko
e4f41de77f MAINTAINERS: Sort entries in database for GPIO
Run parse-maintainers.pl and choose GPIO records. Fix them accordingly.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-02-10 10:55:18 +01:00
Bartosz Golaszewski
62adc6f33d gpiolib: fix gpio_do_set_config()
Commit d90f36851d ("gpiolib: have a single place of calling
set_config()") introduced a regression where we don't pass the right
variable as argument to the set_config() callback of gpio driver from
gpio_set_config(). After reverting two additional patches that came
on top of it - this addresses the issue by changing the type of the last
argument of gpio_do_set_config() to unsigned long and making sure the
packed config variable is actually used in gpio_set_config().

Fixes: d90f36851d ("gpiolib: have a single place of calling set_config()")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
2020-02-10 10:55:18 +01:00
Bartosz Golaszewski
91b4ea5fc5 Revert "gpiolib: remove set but not used variable 'config'"
This reverts commit e5e42ad224.

This patch came on top of another patch that introduced a regression.
Revert it before addressing the culprit.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
2020-02-10 10:55:18 +01:00
Bartosz Golaszewski
d99f88761b Revert "gpiolib: Remove duplicated function gpio_do_set_config()"
This reverts commit d18fddff06.

This patch came on top of another patch that introduced a regression.
Revert it before addressing the culprit.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
2020-02-10 10:55:18 +01:00
Linus Torvalds
bb6d3fb354 Linux 5.6-rc1 2020-02-09 16:08:48 -08:00
Linus Torvalds
89a47dd1af Kbuild updates for v5.6 (2nd)
- fix randconfig to generate a sane .config
 
  - rename hostprogs-y / always to hostprogs / always-y, which are
    more natual syntax.
 
  - optimize scripts/kallsyms
 
  - fix yes2modconfig and mod2yesconfig
 
  - make multiple directory targets ('make foo/ bar/') work
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl47NfMVHG1hc2FoaXJv
 eUBrZXJuZWwub3JnAAoJED2LAQed4NsGRGwP/3AHO8P0wGEeFKs3ziSMjs2W7/Pj
 lN08Kuxm0u3LnyEEcHVUveoi+xBYqvrw0RsGgYf5S8q0Mpep7MPqbfkDUxV/0Zkj
 QP2CsvOTbjdBjH7q3ojkwLcDl0Pxu9mg3eZMRXZ2WQeNXuMRw6Bicoh7ElvB1Bv/
 HC+j30i2Me3cf/riQGSAsstvlXyIR8RaerR8PfRGESTysiiN76+JcHTatJHhOJL9
 O6XKkzo8/CXMYKKVF4Ae4NP+WFg6E96/pAPx0Rf47RbPX9UG35L9rkzTDnk70Ms6
 OhKiu3hXsRX7mkqApuoTqjge4+iiQcKZxYmMXU1vGlIRzjwg19/4YFP6pDSCcnIu
 kKb8KN4o4N41N7MFS3OLZWwISA8Vw6RbtwDZ3AghDWb7EHb9oNW42mGfcAPr1+wZ
 /KH6RHTzaz+5q2MgyMY1NhADFrhIT9CvDM+UJECgbokblnw7PHAnPmbsuVak9ZOH
 u9ojO1HpTTuIYO6N6v4K5zQBZF1N+RvkmBnhHd8j6SksppsCoC/G62QxgXhF2YK3
 FQMpATCpuyengLxWAmPEjsyyPOlrrdu9UxqNsXVy5ol40+7zpxuHwKcQKCa9urJR
 rcpbIwLaBcLhHU4BmvBxUk5aZxxGV2F0O0gXTOAbT2xhd6BipZSMhUmN49SErhQm
 NC/coUmQX7McxMXh
 =sv4U
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull more Kbuild updates from Masahiro Yamada:

 - fix randconfig to generate a sane .config

 - rename hostprogs-y / always to hostprogs / always-y, which are more
   natual syntax.

 - optimize scripts/kallsyms

 - fix yes2modconfig and mod2yesconfig

 - make multiple directory targets ('make foo/ bar/') work

* tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: make multiple directory targets work
  kconfig: Invalidate all symbols after changing to y or m.
  kallsyms: fix type of kallsyms_token_table[]
  scripts/kallsyms: change table to store (strcut sym_entry *)
  scripts/kallsyms: rename local variables in read_symbol()
  kbuild: rename hostprogs-y/always to hostprogs/always-y
  kbuild: fix the document to use extra-y for vmlinux.lds
  kconfig: fix broken dependency in randconfig-generated .config
2020-02-09 16:05:50 -08:00
Linus Torvalds
380a129eb2 fs: New zonefs file system
Zonefs is a very simple file system exposing each zone of a zoned block
 device as a file.
 
 Unlike a regular file system with native zoned block device support
 (e.g. f2fs or the on-going btrfs effort), zonefs does not hide the
 sequential write constraint of zoned block devices to the user. As a
 result, zonefs is not a POSIX compliant file system. Its goal is to
 simplify the implementation of zoned block devices support in
 applications by replacing raw block device file accesses with a richer
 file based API, avoiding relying on direct block device file ioctls
 which may be more obscure to developers.
 
 One example of this approach is the implementation of LSM
 (log-structured merge) tree structures (such as used in RocksDB and
 LevelDB) on zoned block devices by allowing SSTables to be stored in a
 zone file similarly to a regular file system rather than as a range of
 sectors of a zoned device. The introduction of the higher level
 construct "one file is one zone" can help reducing the amount of changes
 needed in the application while at the same time allowing the use of
 zoned block devices with various programming languages other than C.
 
 Zonefs IO management implementation uses the new iomap generic code.
 Zonefs has been successfully tested using a functional test suite
 (available with zonefs userland format tool on github) and a prototype
 implementation of LevelDB on top of zonefs.
 
 Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCXj1y8QAKCRDdoc3SxdoY
 dqozAP9J3t+Q95BgKgI5jP+XEtyYsPBTaVrvaSaViEnwtJLVoQD/ZQ1lTCZSE9OI
 UkvWawkuFtLGfOxTqyA3eZrZi22Ttwk=
 =YVvO
 -----END PGP SIGNATURE-----

Merge tag 'zonefs-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs

Pull new zonefs file system from Damien Le Moal:
 "Zonefs is a very simple file system exposing each zone of a zoned
  block device as a file.

  Unlike a regular file system with native zoned block device support
  (e.g. f2fs or the on-going btrfs effort), zonefs does not hide the
  sequential write constraint of zoned block devices to the user. As a
  result, zonefs is not a POSIX compliant file system. Its goal is to
  simplify the implementation of zoned block devices support in
  applications by replacing raw block device file accesses with a richer
  file based API, avoiding relying on direct block device file ioctls
  which may be more obscure to developers.

  One example of this approach is the implementation of LSM
  (log-structured merge) tree structures (such as used in RocksDB and
  LevelDB) on zoned block devices by allowing SSTables to be stored in a
  zone file similarly to a regular file system rather than as a range of
  sectors of a zoned device. The introduction of the higher level
  construct "one file is one zone" can help reducing the amount of
  changes needed in the application while at the same time allowing the
  use of zoned block devices with various programming languages other
  than C.

  Zonefs IO management implementation uses the new iomap generic code.
  Zonefs has been successfully tested using a functional test suite
  (available with zonefs userland format tool on github) and a prototype
  implementation of LevelDB on top of zonefs"

* tag 'zonefs-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
  zonefs: Add documentation
  fs: New zonefs file system
2020-02-09 15:51:46 -08:00
Marc Zyngier
490d332ea4 irqchip/gic-v4.1: Avoid 64bit division for the sake of 32bit ARM
In order to allow the GICv4 code to link properly on 32bit ARM,
make sure we don't use 64bit divisions when it isn't strictly
necessary.

Fixes: 4e6437f12d ("irqchip/gic-v4.1: Ensure L2 vPE table is allocated at RD level")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-09 15:47:37 -08:00
Linus Torvalds
d1ea35f4cd 13 cifs/smb3 patches most from testing at the SMB3 plugfest this week
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAl49bNsACgkQiiy9cAdy
 T1EGlQwArDJiHUV7W/WaoDZnusPPQqUT3ayqAHL0P8cDsjxLu3uNMkUISr0HdbxC
 kqYahSTb+/BKQzoZhVe5wK3S8W6R8+wyaPJExRCL3brlIHVP/eC9uUjSgkT6QVDl
 /vZCwxj7KmTK/S+ofji/XTl2f8f8BCw2biGVxwR2Jj5pwKI4wFIMFm7mDetTQRD4
 bK0UR2Owiw4DpPXdwHlXPf9N06z0ETa1UdMXklIBgeK9B1eT1STD9q/iHJh3bLpO
 klhbiq5eGRCcs9cBVTQcn6U+zGYBOcdJuhPGbAObEU+R2vNX06clydKlKy1oz1VL
 4jbVVn9xuGZ9evFBC3h7Na1X7C3V28WcpfeRfFxZ157hNuQSNo5wiq0rF66EQ14U
 hbmlx2S2ooyNKcnrj46SUw9zVLZ0xcx1Mw7kmoyHgI/vznW9fvV0Y2JXawJMPei5
 VuQTgDLFsvnIIrUnrGBu2UXMzXghxLZ3SXJVKXuW3luvNRk82RAGHmIdty3OTgPp
 DN9lhGvv
 =F1qf
 -----END PGP SIGNATURE-----

Merge tag '5.6-rc-smb3-plugfest-patches' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
 "13 cifs/smb3 patches, most from testing at the SMB3 plugfest this week:

   - Important fix for multichannel and for modefromsid mounts.

   - Two reconnect fixes

   - Addition of SMB3 change notify support

   - Backup tools fix

   - A few additional minor debug improvements (tracepoints and
     additional logging found useful during testing this week)"

* tag '5.6-rc-smb3-plugfest-patches' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: Add defines for new information level, FileIdInformation
  smb3: print warning once if posix context returned on open
  smb3: add one more dynamic tracepoint missing from strict fsync path
  cifs: fix mode bits from dir listing when mounted with modefromsid
  cifs: fix channel signing
  cifs: add SMB3 change notification support
  cifs: make multichannel warning more visible
  cifs: fix soft mounts hanging in the reconnect code
  cifs: Add tracepoints for errors on flush or fsync
  cifs: log warning message (once) if out of disk space
  cifs: fail i/o on soft mounts if sessionsetup errors out
  smb3: fix problem with null cifs super block with previous patch
  SMB3: Backup intent flag missing from some more ops
2020-02-09 13:27:17 -08:00
Linus Torvalds
5586c3c1e0 Merge branch 'work.vboxsf' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vboxfs from Al Viro:
 "This is the VirtualBox guest shared folder support by Hans de Goede,
  with fixups for fs_parse folded in to avoid bisection hazards from
  those API changes..."

* 'work.vboxsf' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs: Add VirtualBox guest shared folder (vboxsf) support
2020-02-09 12:41:00 -08:00
Linus Torvalds
1a2a76c268 A set of fixes for X86:
- Ensure that the PIT is set up when the local APIC is disable or
    configured in legacy mode. This is caused by an ordering issue
    introduced in the recent changes which skip PIT initialization when the
    TSC and APIC frequencies are already known.
 
  - Handle malformed SRAT tables during early ACPI parsing which caused an
    infinite loop anda boot hang.
 
  - Fix a long standing race in the affinity setting code which affects PCI
    devices with non-maskable MSI interrupts. The problem is caused by the
    non-atomic writes of the MSI address (destination APIC id) and data
    (vector) fields which the device uses to construct the MSI message. The
    non-atomic writes are mandated by PCI.
 
    If both fields change and the device raises an interrupt after writing
    address and before writing data, then the MSI block constructs a
    inconsistent message which causes interrupts to be lost and subsequent
    malfunction of the device.
 
    The fix is to redirect the interrupt to the new vector on the current
    CPU first and then switch it over to the new target CPU. This allows to
    observe an eventually raised interrupt in the transitional stage (old
    CPU, new vector) to be observed in the APIC IRR and retriggered on the
    new target CPU and the new vector. The potential spurious interrupts
    caused by this are harmless and can in the worst case expose a buggy
    driver (all handlers have to be able to deal with spurious interrupts as
    they can and do happen for various reasons).
 
  - Add the missing suspend/resume mechanism for the HYPERV hypercall page
    which prevents resume hibernation on HYPERV guests. This change got
    lost before the merge window.
 
  - Mask the IOAPIC before disabling the local APIC to prevent potentially
    stale IOAPIC remote IRR bits which cause stale interrupt lines after
    resume.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl5AEJwTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoWY2D/47ur9gsVQGryKzneVAr0SCsq4Un11e
 uifX4ldu4gCEBRTYhpgcpiFKeLvY/QJ6uOD+gQUHyy/s+lCf6yzE6UhXEqSCtcT7
 LkSxD8jAFf6KhMA6iqYBfyxUsPMXBetLjjHWsyc/kf15O/vbYm7qf05timmNZkDS
 S7C+yr3KRqRjLR7G7t4twlgC9aLcNUQihUdsH2qyTvjnlkYHJLDa0/Js7bFYYKVx
 9GdUDLvPFB1mZ76g012De4R3kJsWitiyLlQ38DP5VysKulnszUCdiXlgCEFrgxvQ
 OQhLafQzOAzvxQmP+1alODR0dmJZA8k0zsDeeTB/vTpRvv6+Pe2qUswLSpauBzuq
 TpDsrv8/5pwZh28+91f/Unk+tH8NaVNtGe/Uf+ePxIkn1nbqL84o4NHGplM6R97d
 HAWdZQZ1cGRLf6YRRJ+57oM/5xE3vBbF1Wn0+QDTFwdsk2vcxuQ4eB3M/8E1V7Zk
 upp8ty50bZ5+rxQ8XTq/eb8epSRnfLoBYpi4ux6MIOWRdmKDl40cDeZCzA2kNP7m
 qY1haaRN3ksqvhzc0Yf6cL+CgvC4ur8gRHezfOqmBzVoaLyVEFIVjgjR/ojf0bq8
 /v+L9D5+IdIv4jEZruRRs0gOXNDzoBbvf0qKGaO0tUTWiDsv7c5AGixp8aozniHS
 HXsv1lIpRuC7WQ==
 =WxKD
 -----END PGP SIGNATURE-----

Merge tag 'x86-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 fixes from Thomas Gleixner:
 "A set of fixes for X86:

   - Ensure that the PIT is set up when the local APIC is disable or
     configured in legacy mode. This is caused by an ordering issue
     introduced in the recent changes which skip PIT initialization when
     the TSC and APIC frequencies are already known.

   - Handle malformed SRAT tables during early ACPI parsing which caused
     an infinite loop anda boot hang.

   - Fix a long standing race in the affinity setting code which affects
     PCI devices with non-maskable MSI interrupts. The problem is caused
     by the non-atomic writes of the MSI address (destination APIC id)
     and data (vector) fields which the device uses to construct the MSI
     message. The non-atomic writes are mandated by PCI.

     If both fields change and the device raises an interrupt after
     writing address and before writing data, then the MSI block
     constructs a inconsistent message which causes interrupts to be
     lost and subsequent malfunction of the device.

     The fix is to redirect the interrupt to the new vector on the
     current CPU first and then switch it over to the new target CPU.
     This allows to observe an eventually raised interrupt in the
     transitional stage (old CPU, new vector) to be observed in the APIC
     IRR and retriggered on the new target CPU and the new vector.

     The potential spurious interrupts caused by this are harmless and
     can in the worst case expose a buggy driver (all handlers have to
     be able to deal with spurious interrupts as they can and do happen
     for various reasons).

   - Add the missing suspend/resume mechanism for the HYPERV hypercall
     page which prevents resume hibernation on HYPERV guests. This
     change got lost before the merge window.

   - Mask the IOAPIC before disabling the local APIC to prevent
     potentially stale IOAPIC remote IRR bits which cause stale
     interrupt lines after resume"

* tag 'x86-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic: Mask IOAPIC entries when disabling the local APIC
  x86/hyperv: Suspend/resume the hypercall page for hibernation
  x86/apic/msi: Plug non-maskable MSI affinity race
  x86/boot: Handle malformed SRAT tables during early ACPI parsing
  x86/timer: Don't skip PIT setup when APIC is disabled or in legacy mode
2020-02-09 12:11:12 -08:00
Linus Torvalds
f41377609a Two fixes for the SMP related functionality:
- Make the UP version of smp_call_function_single() match SMP semantics
    when called for a not available CPU.  Instead of emitting a warning and
    assuming that the function call target is CPU0, return a proper error
    code like the SMP version does.
 
  - Remove a superfluous check in smp_call_function_many_cond()
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl5ADFYTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoZdoD/9I+zp3QWj0/xxpNEOZj5yKhaxDLMqK
 OjgIvKGOfd5kWk+y57iuvPZKiacnHPlixni9H0KlAz6FW8V40jQz5iOCpnw6OTSO
 mqET7dn7ei7+9fpKmivfAybf8Jz9dy4ouZUwxEo0L+AizI6JE1eR6tpCbt09I9Dk
 uOCIcolTFX32JF4p7IHSlk1ViU8jC/L1zO7In7aqizpwQt9uVxLRUZeIb3nSftBY
 iJs8Kubfb+Fuc7+k5CXYmXLC6toqhWvsN1546ngC+sYz4nbgGUcnYc+U9slstGkr
 fHiP2uuTyYdIwKYrF7KYRv0NdjrEt4w+ZpK49AHoc0ZNs8MnVhcGq4riWWjmfuGk
 ZTbmEIQu9cxEaecQcIsIVpi7xpap0LfFTTze0YUshYlHtONQ4xAsFo2vjbBTMDqU
 P31aVv95bgHDaDv12pQu3DV/ztW4Xi5/6KynDkeCBo9VdaUwGbpV9Ro0SCWSt5qH
 OymyN1x+JIozd2LGNA8Vat7FxpktgqTCe2TMLLwqL4fX4GtTHbwC9zFyfvcey2Kn
 KKgP1c0rcHYmdyYvFd6mumjhzusBGCUVL/h9SSKboNQWZ0/fL1KyFZseM5Sqwexy
 76qVA2zY0ZJ0QN77vZqZgWWf2UUlxF7++Vi0cfuCtt2+V4SiYN7RzeO8SpAKSD0M
 4ycr8w8uXQk45Q==
 =XfHp
 -----END PGP SIGNATURE-----

Merge tag 'smp-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull SMP fixes from Thomas Gleixner:
 "Two fixes for the SMP related functionality:

   - Make the UP version of smp_call_function_single() match SMP
     semantics when called for a not available CPU. Instead of emitting
     a warning and assuming that the function call target is CPU0,
     return a proper error code like the SMP version does.

   - Remove a superfluous check in smp_call_function_many_cond()"

* tag 'smp-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  smp/up: Make smp_call_function_single() match SMP semantics
  smp: Remove superfluous cond_func check in smp_call_function_many_cond()
2020-02-09 12:09:43 -08:00
Linus Torvalds
ca21b9b370 A set of fixes and improvements for the perf subsystem:
- Kernel fixes:
 
    - Install cgroup events to the correct CPU context to prevent a
      potential list double add
 
    - Prevent am intgeer underflow in the perf mlock acounting
 
    - Add a missing prototyp for arch_perf_update_userpage()
 
  - Tooling:
 
    - Add a missing unlock in the error path of maps__insert() in perf maps.
 
    - Fix the build with the latest libbfd
 
    - Fix the perf parser so it does not delete parse event terms, which
      caused a regression for using perf with the ARM CoreSight as the sink
      confuguration was missing due to the deletion.
 
    - Fix the double free in the perf CPU map merging test case
 
    - Add the missing ustring support for the perf probe command
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl5AC0ITHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoaJtD/4jEdN6KNGVJIQ5jOYdchXK/zb68plS
 3By6CegbaNq1SU5UPIdMX4BkznVGaVtJU/0hWuvD/ycpBTAMgKjwalYJtAC+anVi
 JhG7NiPRV1Nhm+7eZ/78mUpW4CUimTlvZVzU/yneYdFm2klvcxUHblJYSqEGp0AS
 r2aZRsqQnWSoI/+z+0THO8tI+HLSpkmKy2slLxaZphI0VjSrjWPDHfF6eAOyl/dq
 lTCz+tjd6EytELL+lhWFsGXYAi6HPKP3T4yPRH+eDYKQmByYaEYbK3E8wg/0XB/J
 2AHgSBf9pSPDBIkLOWOidmkmWgZD9ykCTyOPu4N0S70+NeaCm2nXLTOQ7dnyLE7t
 WCx8mvnIS2hshNUoXMkarG5LYexPupDMMEfHyUT5+T2rKxacKWLaRoIV+JCsUpQb
 m6eU3+n/YsN1C05V75Fuztt4irGhltlQxcG8F3gH/vqSy6VDdZb8lMU6+iyE2VKG
 ezsI7AMQkT6LrTGa2hXHHnnluaxHHSA32GPe4W1QTwMCMWMtRTwQHBBLoJ4mC0wk
 iujB9DVuh7ljmr7QSG9ZYV91eplpzJDUC54P6Qs/p7ouG4YzkIO6glt6BOgBmbp7
 YkrJtGpV6npjJmLckktcSd9rtnCzot6yGxeaIVfLPhhtf2KECSCckCyddwkakt0A
 wwVVBe8RNxXf2A==
 =xu7D
 -----END PGP SIGNATURE-----

Merge tag 'perf-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull perf fixes from Thomas Gleixner:
 "A set of fixes and improvements for the perf subsystem:

  Kernel fixes:

   - Install cgroup events to the correct CPU context to prevent a
     potential list double add

   - Prevent an integer underflow in the perf mlock accounting

   - Add a missing prototype for arch_perf_update_userpage()

  Tooling:

   - Add a missing unlock in the error path of maps__insert() in perf
     maps.

   - Fix the build with the latest libbfd

   - Fix the perf parser so it does not delete parse event terms, which
     caused a regression for using perf with the ARM CoreSight as the
     sink configuration was missing due to the deletion.

   - Fix the double free in the perf CPU map merging test case

   - Add the missing ustring support for the perf probe command"

* tag 'perf-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf maps: Add missing unlock to maps__insert() error case
  perf probe: Add ustring support for perf probe command
  perf: Make perf able to build with latest libbfd
  perf test: Fix test case Merge cpu map
  perf parse: Copy string to perf_evsel_config_term
  perf parse: Refactor 'struct perf_evsel_config_term'
  kernel/events: Add a missing prototype for arch_perf_update_userpage()
  perf/cgroups: Install cgroup events to correct cpuctx
  perf/core: Fix mlock accounting in perf_mmap()
2020-02-09 12:04:09 -08:00