2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-24 05:04:00 +08:00
Commit Graph

294 Commits

Author SHA1 Message Date
Linus Torvalds
71c3a888cb powerpc updates for 5.6
- Implement user_access_begin() and friends for our platforms that support
    controlling kernel access to userspace.
 
  - Enable CONFIG_VMAP_STACK on 32-bit Book3S and 8xx.
 
  - Some tweaks to our pseries IOMMU code to allow SVMs ("secure" virtual
    machines) to use the IOMMU.
 
  - Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE to the 32-bit VDSO, and
    some other improvements.
 
  - A series to use the PCI hotplug framework to control opencapi card's so that
    they can be reset and re-read after flashing a new FPGA image.
 
 As well as other minor fixes and improvements as usual.
 
 Thanks to:
  Alastair D'Silva, Alexandre Ghiti, Alexey Kardashevskiy, Andrew Donnellan,
  Aneesh Kumar K.V, Anju T Sudhakar, Bai Yingjie, Chen Zhou, Christophe Leroy,
  Frederic Barrat, Greg Kurz, Jason A. Donenfeld, Joel Stanley, Jordan Niethe,
  Julia Lawall, Krzysztof Kozlowski, Laurent Dufour, Laurentiu Tudor, Linus
  Walleij, Michael Bringmann, Nathan Chancellor, Nicholas Piggin, Nick
  Desaulniers, Oliver O'Halloran, Peter Ujfalusi, Pingfan Liu, Ram Pai, Randy
  Dunlap, Russell Currey, Sam Bobroff, Sebastian Andrzej Siewior, Shawn
  Anastasio, Stephen Rothwell, Steve Best, Sukadev Bhattiprolu, Thiago Jung
  Bauermann, Tyrel Datwyler, Vaibhav Jain.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl44uJgTHG1wZUBlbGxl
 cm1hbi5pZC5hdQAKCRBR6+o8yOGlgGIcD/9U3R2BK3trEPOStcUbYPte9sMqkyYq
 bcq4o2qrVc5deMvPhcHOQ4j28RUZOKoRODvSbXzGEGKIDlesmKjuP7AicE5qUjjV
 jRtsSOlRElXmPojAgrrlWrFDJOKbW5mFSj2TY/0sjVa06Wcu1Oi6WiQs/TazvZV/
 yzKh5lBL6xyQrmgH0h1VWWbblMbsA1bAL/D7m9Pgimpz0W6fOSRWgXILDUXPLBAy
 Rtt7p1218xPfhe66EgbLhWLIBJb70r+Z9yJNuVbp9NMJbDAhpfOuyMNXpRCELzXD
 5hwm0mFLOwxfSyBgIyIGokLRGFO6XL0uiZIG1Kp+tMxjgnNCmLlRs2R3EF1hoIWi
 49DHRAdK+IEggi6S4dXG5aglz6Rsun8pb/lN7uW+M68t3wp2IYQ+H8MQh4cxPTLu
 wX6KZr28lNG25yyp97nJq2Vld0xTxSSty92P8f588rkolyxzggUy0Xfen41szNrW
 9/bu8NWgt7qVtHmeUoCdWqiIiuMT1k3Of7AN4uAuS6aJHx2Fxr+03ZU5yNr8WIkm
 IOf27z8sUx3F8JL9cIuwAIPB0lSDPw1owvfiTYQ1VkzJa4Ko+kgv5wQ5Ors6V+ve
 XspE4osSP9T9PoHK2MVlu8mOjLpoo3Ibr849J0lGHQZDP6U3kHNILGfcXA8WP/9b
 Fgfh5Wj22cQe8A==
 =xpG+
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "A pretty small batch for us, and apologies for it being a bit late, I
  wanted to sneak Christophe's user_access_begin() series in.

  Summary:

   - Implement user_access_begin() and friends for our platforms that
     support controlling kernel access to userspace.

   - Enable CONFIG_VMAP_STACK on 32-bit Book3S and 8xx.

   - Some tweaks to our pseries IOMMU code to allow SVMs ("secure"
     virtual machines) to use the IOMMU.

   - Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE to the 32-bit
     VDSO, and some other improvements.

   - A series to use the PCI hotplug framework to control opencapi
     card's so that they can be reset and re-read after flashing a new
     FPGA image.

  As well as other minor fixes and improvements as usual.

  Thanks to: Alastair D'Silva, Alexandre Ghiti, Alexey Kardashevskiy,
  Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Bai Yingjie, Chen
  Zhou, Christophe Leroy, Frederic Barrat, Greg Kurz, Jason A.
  Donenfeld, Joel Stanley, Jordan Niethe, Julia Lawall, Krzysztof
  Kozlowski, Laurent Dufour, Laurentiu Tudor, Linus Walleij, Michael
  Bringmann, Nathan Chancellor, Nicholas Piggin, Nick Desaulniers,
  Oliver O'Halloran, Peter Ujfalusi, Pingfan Liu, Ram Pai, Randy Dunlap,
  Russell Currey, Sam Bobroff, Sebastian Andrzej Siewior, Shawn
  Anastasio, Stephen Rothwell, Steve Best, Sukadev Bhattiprolu, Thiago
  Jung Bauermann, Tyrel Datwyler, Vaibhav Jain"

* tag 'powerpc-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (131 commits)
  powerpc: configs: Cleanup old Kconfig options
  powerpc/configs/skiroot: Enable some more hardening options
  powerpc/configs/skiroot: Disable xmon default & enable reboot on panic
  powerpc/configs/skiroot: Enable security features
  powerpc/configs/skiroot: Update for symbol movement only
  powerpc/configs/skiroot: Drop default n CONFIG_CRYPTO_ECHAINIV
  powerpc/configs/skiroot: Drop HID_LOGITECH
  powerpc/configs: Drop NET_VENDOR_HP which moved to staging
  powerpc/configs: NET_CADENCE became NET_VENDOR_CADENCE
  powerpc/configs: Drop CONFIG_QLGE which moved to staging
  powerpc: Do not consider weak unresolved symbol relocations as bad
  powerpc/32s: Fix kasan_early_hash_table() for CONFIG_VMAP_STACK
  powerpc: indent to improve Kconfig readability
  powerpc: Provide initial documentation for PAPR hcalls
  powerpc: Implement user_access_save() and user_access_restore()
  powerpc: Implement user_access_begin and friends
  powerpc/32s: Prepare prevent_user_access() for user_access_end()
  powerpc/32s: Drop NULL addr verification
  powerpc/kuap: Fix set direction in allow/prevent_user_access()
  powerpc/32s: Fix bad_kuap_fault()
  ...
2020-02-04 13:06:46 +00:00
Vaibhav Jain
58b278f568 powerpc: Provide initial documentation for PAPR hcalls
This doc patch provides an initial description of the hcall op-codes
that are used by Linux kernel running as a guest (LPAR) on top of
PowerVM or any other sPAPR compliant hyper-visor (e.g qemu).

Apart from documenting the hcalls the doc-patch also provides a
rudimentary overview of how hcall ABI, how they are issued with the
Linux kernel and how information/control flows between the guest and
hypervisor.

Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Add SPDX tag, add it to index.rst]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190828082729.16695-1-vaibhav@linux.ibm.com
2020-01-29 21:30:50 +11:00
Sukadev Bhattiprolu
3a43970d55 KVM: PPC: Book3S HV: Implement H_SVM_INIT_ABORT hcall
Implement the H_SVM_INIT_ABORT hcall which the Ultravisor can use to
abort an SVM after it has issued the H_SVM_INIT_START and before the
H_SVM_INIT_DONE hcalls. This hcall could be used when Ultravisor
encounters security violations or other errors when starting an SVM.

Note that this hcall is different from UV_SVM_TERMINATE ucall which
is used by HV to terminate/cleanup an VM that has becore secure.

The H_SVM_INIT_ABORT basically undoes operations that were done
since the H_SVM_INIT_START hcall - i.e page-out all the VM pages back
to normal memory, and terminate the SVM.

(If we do not bring the pages back to normal memory, the text/data
of the VM would be stuck in secure memory and since the SVM did not
go secure, its MSR_S bit will be clear and the VM wont be able to
access its pages even to do a clean exit).

Based on patches and discussion with Paul Mackerras, Ram Pai and
Bharata Rao.

Signed-off-by: Ram Pai <linuxram@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2020-01-17 15:08:31 +11:00
Anju T Sudhakar
1a3ec143a9 powerpc/imc: Add documentation for IMC and trace-mode
Documentation for IMC (In-Memory Collection Counters) infrastructure
and trace-mode of IMC.

Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
[mpe: Convert to rst, minor rewording, make PMI example more concise]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191028100816.6270-1-mpe@ellerman.id.au
2020-01-06 16:25:27 +11:00
Jason Yan
c2d1a13520 powerpc/fsl_booke/32: Document KASLR implementation
Add document to explain how we implement KASLR for fsl_booke32.

Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Scott Wood <oss@buserror.net>
[mpe: Add it to the index as well]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-11-13 19:27:58 +11:00
Adam Zerella
ad9b48c522 docs: powerpc: Add missing documentation reference
The documentation pages for 'elfnote' and 'ultravisor'
are not included in the powerpc documentation index, this
generates Sphinx warnings:

WARNING: document isn't included in any toctree

Additionally, when one includes these missing doc pages,
more Sphinx warnings appear. Unused footnote references,
syntax highlighting and table of content ordering has
been adjusted.

Signed-off-by: Adam Zerella <adam.zerella@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190915052905.13431-1-adam.zerella@gmail.com
2019-09-17 23:59:34 +10:00
Hari Bathini
b3bba79d5a powerpc/fadump: update documentation about option to release opalcore
With /sys/firmware/opal/core support available on OPAL based machines
and an option to the release memory used by kernel in exporting this
core file, update FADump documentation with these details.

Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/156821382786.5656.13173494907671241231.stgit@hbathini.in.ibm.com
2019-09-14 00:04:45 +10:00
Hari Bathini
58cf055df4 powerpc/fadump: update documentation about CONFIG_PRESERVE_FA_DUMP
Kernel config option CONFIG_PRESERVE_FA_DUMP is introduced to ensure
crash data, from previously crash'ed kernel, is preserved. Update
documentation with this details.

Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/156821377195.5656.15840065629705958324.stgit@hbathini.in.ibm.com
2019-09-14 00:04:45 +10:00
Hari Bathini
fbcafdaea2 powerpc/fadump: Update documentation about OPAL platform support
With FADump support now available on both pseries and OPAL platforms,
update FADump documentation with these details.

Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/156821361692.5656.11377757995827253404.stgit@hbathini.in.ibm.com
2019-09-14 00:04:44 +10:00
Hari Bathini
1679b96e69 powerpc/fadump: use FADump instead of fadump for how it is pronounced
fadump is pronounced f-a-dump. Update documentation accordingly. Also,
update how fadump_region contents look like with recent changes.

Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/156821339317.5656.15852294223821732082.stgit@hbathini.in.ibm.com
2019-09-14 00:04:42 +10:00
Hari Bathini
8468d15545 powerpc/fadump: Improve fadump documentation
The figures depicting FADump's (Firmware-Assisted Dump) memory layout
are missing some finer details like different memory regions and what
they represent. Improve the documentation by updating those details.

Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/156821322070.5656.8194734198500730487.stgit@hbathini.in.ibm.com
2019-09-14 00:04:41 +10:00
Sukadev Bhattiprolu
250c6c3122 Documentation/powerpc: Ultravisor API
Protected Execution Facility (PEF) is an architectural change for
POWER 9 that enables Secure Virtual Machines (SVMs). When enabled,
PEF adds a new higher privileged mode, called Ultravisor mode, to POWER
architecture. Along with the new mode there is new firmware called the
Protected Execution Ultravisor (or Ultravisor for short).

POWER 9 DD2.3 chips (PVR=0x004e1203) or greater will be PEF-capable.

Attached documentation provides an overview of PEF and defines the API
for various interfaces that must be implemented in the Ultravisor
firmware as well as in the KVM Hypervisor.

Based on input from Mike Anderson, Thiago Bauermann, Claudio Carvalho,
Ben Herrenschmidt, Guerney Hunt, Paul Mackerras.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Ram Pai <linuxram@linux.ibm.com>
Signed-off-by: Guerney Hunt <gdhh@linux.ibm.com>
Reviewed-by: Claudio Carvalho <cclaudio@linux.ibm.com>
Reviewed-by: Michael Anderson <andmike@linux.ibm.com>
Reviewed-by: Thiago Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Claudio Carvalho <cclaudio@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190822034838.27876-2-cclaudio@linux.ibm.com
2019-08-30 09:40:15 +10:00
Maxiwell S. Garcia
134cb3ab71 Documentation/powerpc: Add ELF note documentation
The ELF note documentation describes the types and descriptors to be
used with the PowerPC namespace.

Signed-off-by: Maxiwell S. Garcia <maxiwell@linux.ibm.com>
Signed-off-by: Claudio Carvalho <cclaudio@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190829155021.2915-3-maxiwell@linux.ibm.com
2019-08-30 09:40:15 +10:00
Mauro Carvalho Chehab
4d2e26a38f docs: powerpc: convert docs to ReST and rename to *.rst
Convert docs to ReST and add them to the arch-specific
book.

The conversion here was trivial, as almost every file there
was already using an elegant format close to ReST standard.

The changes were mostly to mark literal blocks and add a few
missing section title identifiers.

One note with regards to "--": on Sphinx, this can't be used
to identify a list, as it will format it badly. This can be
used, however, to identify a long hyphen - and "---" is an
even longer one.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> # cxl
2019-07-17 06:57:51 -03:00
Mauro Carvalho Chehab
330d481052 docs: admin-guide: add kdump documentation into it
The Kdump documentation describes procedures with admins use
in order to solve issues on their systems.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-15 11:03:01 -03:00
Linus Torvalds
192f0f8e9d powerpc updates for 5.3
Notable changes:
 
  - Removal of the NPU DMA code, used by the out-of-tree Nvidia driver, as well
    as some other functions only used by drivers that haven't (yet?) made it
    upstream.
 
  - A fix for a bug in our handling of hardware watchpoints (eg. perf record -e
    mem: ...) which could lead to register corruption and kernel crashes.
 
  - Enable HAVE_ARCH_HUGE_VMAP, which allows us to use large pages for vmalloc
    when using the Radix MMU.
 
  - A large but incremental rewrite of our exception handling code to use gas
    macros rather than multiple levels of nested CPP macros.
 
 And the usual small fixes, cleanups and improvements.
 
 Thanks to:
   Alastair D'Silva, Alexey Kardashevskiy, Andreas Schwab, Aneesh Kumar K.V, Anju
   T Sudhakar, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Cédric Le Goater,
   Christian Lamparter, Christophe Leroy, Christophe Lombard, Christoph Hellwig,
   Daniel Axtens, Denis Efremov, Enrico Weigelt, Frederic Barrat, Gautham R.
   Shenoy, Geert Uytterhoeven, Geliang Tang, Gen Zhang, Greg Kroah-Hartman, Greg
   Kurz, Gustavo Romero, Krzysztof Kozlowski, Madhavan Srinivasan, Masahiro
   Yamada, Mathieu Malaterre, Michael Neuling, Nathan Lynch, Naveen N. Rao,
   Nicholas Piggin, Nishad Kamdar, Oliver O'Halloran, Qian Cai, Ravi Bangoria,
   Sachin Sant, Sam Bobroff, Satheesh Rajendran, Segher Boessenkool, Shaokun
   Zhang, Shawn Anastasio, Stewart Smith, Suraj Jitindar Singh, Thiago Jung
   Bauermann, YueHaibing.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJdKVoLAAoJEFHr6jzI4aWA0kIP/A6shIbbE7H5W2hFrqt/PPPK
 3+VrvPKbOFF+W6hcE/RgSZmEnUo0svdNjHUd/eMfFS1vb/uRt2QDdrsHUNNwURQL
 M2mcLXFwYpnjSjb/XMgDbHpAQxjeGfTdYLonUIejN7Rk8KQUeLyKQ3SBn6kfMc46
 DnUUcPcjuRGaETUmVuZZ4e40ZWbJp8PKDrSJOuUrTPXMaK5ciNbZk5mCWXGbYl6G
 BMQAyv4ld/417rNTjBEP/T2foMJtioAt4W6mtlgdkOTdIEZnFU67nNxDBthNSu2c
 95+I+/sML4KOp1R4yhqLSLIDDbc3bg3c99hLGij0d948z3bkSZ8bwnPaUuy70C4v
 U8rvl/+N6C6H3DgSsPE/Gnkd8DnudqWY8nULc+8p3fXljGwww6/Qgt+6yCUn8BdW
 WgixkSjKgjDmzTw8trIUNEqORrTVle7cM2hIyIK2Q5T4kWzNQxrLZ/x/3wgoYjUa
 1KwIzaRo5JKZ9D3pJnJ5U+knE2/90rJIyfcp0W6ygyJsWKi2GNmq1eN3sKOw0IxH
 Tg86RENIA/rEMErNOfP45sLteMuTR7of7peCG3yumIOZqsDVYAzerpvtSgip2cvK
 aG+9HcYlBFOOOF9Dabi8GXsTBLXLfwiyjjLSpA9eXPwW8KObgiNfTZa7ujjTPvis
 4mk9oukFTFUpfhsMmI3T
 =3dBZ
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Notable changes:

   - Removal of the NPU DMA code, used by the out-of-tree Nvidia driver,
     as well as some other functions only used by drivers that haven't
     (yet?) made it upstream.

   - A fix for a bug in our handling of hardware watchpoints (eg. perf
     record -e mem: ...) which could lead to register corruption and
     kernel crashes.

   - Enable HAVE_ARCH_HUGE_VMAP, which allows us to use large pages for
     vmalloc when using the Radix MMU.

   - A large but incremental rewrite of our exception handling code to
     use gas macros rather than multiple levels of nested CPP macros.

  And the usual small fixes, cleanups and improvements.

  Thanks to: Alastair D'Silva, Alexey Kardashevskiy, Andreas Schwab,
  Aneesh Kumar K.V, Anju T Sudhakar, Anton Blanchard, Arnd Bergmann,
  Athira Rajeev, Cédric Le Goater, Christian Lamparter, Christophe
  Leroy, Christophe Lombard, Christoph Hellwig, Daniel Axtens, Denis
  Efremov, Enrico Weigelt, Frederic Barrat, Gautham R. Shenoy, Geert
  Uytterhoeven, Geliang Tang, Gen Zhang, Greg Kroah-Hartman, Greg Kurz,
  Gustavo Romero, Krzysztof Kozlowski, Madhavan Srinivasan, Masahiro
  Yamada, Mathieu Malaterre, Michael Neuling, Nathan Lynch, Naveen N.
  Rao, Nicholas Piggin, Nishad Kamdar, Oliver O'Halloran, Qian Cai, Ravi
  Bangoria, Sachin Sant, Sam Bobroff, Satheesh Rajendran, Segher
  Boessenkool, Shaokun Zhang, Shawn Anastasio, Stewart Smith, Suraj
  Jitindar Singh, Thiago Jung Bauermann, YueHaibing"

* tag 'powerpc-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (163 commits)
  powerpc/powernv/idle: Fix restore of SPRN_LDBAR for POWER9 stop state.
  powerpc/eeh: Handle hugepages in ioremap space
  ocxl: Update for AFU descriptor template version 1.1
  powerpc/boot: pass CONFIG options in a simpler and more robust way
  powerpc/boot: add {get, put}_unaligned_be32 to xz_config.h
  powerpc/irq: Don't WARN continuously in arch_local_irq_restore()
  powerpc/module64: Use symbolic instructions names.
  powerpc/module32: Use symbolic instructions names.
  powerpc: Move PPC_HA() PPC_HI() and PPC_LO() to ppc-opcode.h
  powerpc/module64: Fix comment in R_PPC64_ENTRY handling
  powerpc/boot: Add lzo support for uImage
  powerpc/boot: Add lzma support for uImage
  powerpc/boot: don't force gzipped uImage
  powerpc/8xx: Add microcode patch to move SMC parameter RAM.
  powerpc/8xx: Use IO accessors in microcode programming.
  powerpc/8xx: replace #ifdefs by IS_ENABLED() in microcode.c
  powerpc/8xx: refactor programming of microcode CPM params.
  powerpc/8xx: refactor printing of microcode patch name.
  powerpc/8xx: Refactor microcode write
  powerpc/8xx: refactor writing of CPM microcode arrays
  ...
2019-07-13 16:08:36 -07:00
Naveen N. Rao
2438ac954b powerpc/pseries: Add documentation for vcpudispatch_stats
Add a document describing the fields provided by
/proc/powerpc/vcpudispatch_stats.

Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-07-04 22:27:25 +10:00
Mauro Carvalho Chehab
d67297ad34 docs: kdump: convert docs to ReST and rename to *.rst
Convert kdump documentation to ReST and add it to the
user faced manual, as the documents are mainly focused on
sysadmins that would be enabling kdump.

Note: the vmcoreinfo.rst has one very long title on one of its
sub-sections:

	PG_lru|PG_private|PG_swapcache|PG_swapbacked|PG_slab|PG_hwpoision|PG_head_mask|PAGE_BUDDY_MAPCOUNT_VALUE(~PG_buddy)|PAGE_OFFLINE_MAPCOUNT_VALUE(~PG_offline)

I opted to break this one, into two entries with the same content,
in order to make it easier to display after being parsed in html and PDF.

The conversion is actually:
  - add blank lines and identation in order to identify paragraphs;
  - fix tables markups;
  - add some lists markups;
  - mark literal blocks;
  - adjust title markups.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-06-14 14:21:24 -06:00
Mauro Carvalho Chehab
27c054d293 docs: mark orphan documents as such
Sphinx doesn't like orphan documents:

    Documentation/accelerators/ocxl.rst: WARNING: document isn't included in any toctree
    Documentation/arm/stm32/overview.rst: WARNING: document isn't included in any toctree
    Documentation/arm/stm32/stm32f429-overview.rst: WARNING: document isn't included in any toctree
    Documentation/arm/stm32/stm32f746-overview.rst: WARNING: document isn't included in any toctree
    Documentation/arm/stm32/stm32f769-overview.rst: WARNING: document isn't included in any toctree
    Documentation/arm/stm32/stm32h743-overview.rst: WARNING: document isn't included in any toctree
    Documentation/arm/stm32/stm32mp157-overview.rst: WARNING: document isn't included in any toctree
    Documentation/gpu/msm-crash-dump.rst: WARNING: document isn't included in any toctree
    Documentation/interconnect/interconnect.rst: WARNING: document isn't included in any toctree
    Documentation/laptops/lg-laptop.rst: WARNING: document isn't included in any toctree
    Documentation/powerpc/isa-versions.rst: WARNING: document isn't included in any toctree
    Documentation/virtual/kvm/amd-memory-encryption.rst: WARNING: document isn't included in any toctree
    Documentation/virtual/kvm/vcpu-requests.rst: WARNING: document isn't included in any toctree

So, while they aren't on any toctree, add :orphan: to them, in order
to silent this warning.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-06-08 13:42:11 -06:00
Joel Stanley
29b861ea77 Documentation: powerpc: Expand the DAWR acronym
Those not of us not drowning in POWER might not know what this means.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03 02:54:58 +10:00
Michael Neuling
c1fe190c06 powerpc: Add force enable of DAWR on P9 option
This adds a flag so that the DAWR can be enabled on P9 via:
  echo Y > /sys/kernel/debug/powerpc/dawr_enable_dangerous

The DAWR was previously force disabled on POWER9 in:
  9654153158 powerpc: Disable DAWR in the base POWER9 CPU features
Also see Documentation/powerpc/DAWR-POWER9.txt

This is a dangerous setting, USE AT YOUR OWN RISK.

Some users may not care about a bad user crashing their box
(ie. single user/desktop systems) and really want the DAWR.  This
allows them to force enable DAWR.

This flag can also be used to disable DAWR access. Once this is
cleared, all DAWR access should be cleared immediately and your
machine once again safe from crashing.

Userspace may get confused by toggling this. If DAWR is force
enabled/disabled between getting the number of breakpoints (via
PTRACE_GETHWDBGINFO) and setting the breakpoint, userspace will get an
inconsistent view of what's available. Similarly for guests.

For the DAWR to be enabled in a KVM guest, the DAWR needs to be force
enabled in the host AND the guest. For this reason, this won't work on
POWERVM as it doesn't allow the HCALL to work. Writes of 'Y' to the
dawr_enable_dangerous file will fail if the hypervisor doesn't support
writing the DAWR.

To double check the DAWR is working, run this kernel selftest:
  tools/testing/selftests/powerpc/ptrace/ptrace-hwbreak.c
Any errors/failures/skips mean something is wrong.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-04-20 22:20:45 +10:00
Mahesh Salgaonkar
a4e92ce8e4 powerpc/fadump: Reservationless firmware assisted dump
One of the primary issues with Firmware Assisted Dump (fadump) on Power
is that it needs a large amount of memory to be reserved. On large
systems with TeraBytes of memory, this reservation can be quite
significant.

In some cases, fadump fails if the memory reserved is insufficient, or
if the reserved memory was DLPAR hot-removed.

In the normal case, post reboot, the preserved memory is filtered to
extract only relevant areas of interest using the makedumpfile tool.
While the tool provides flexibility to determine what needs to be part
of the dump and what memory to filter out, all supported distributions
default this to "Capture only kernel data and nothing else".

We take advantage of this default and the Linux kernel's Contiguous
Memory Allocator (CMA) to fundamentally change the memory reservation
model for fadump.

Instead of setting aside a significant chunk of memory nobody can use,
this patch uses CMA instead, to reserve a significant chunk of memory
that the kernel is prevented from using (due to MIGRATE_CMA), but
applications are free to use it. With this fadump will still be able
to capture all of the kernel memory and most of the user space memory
except the user pages that were present in CMA region.

Essentially, on a P9 LPAR with 2 cores, 8GB RAM and current upstream:
[root@zzxx-yy10 ~]# free -m
              total        used        free      shared  buff/cache   available
Mem:           7557         193        6822          12         541        6725
Swap:          4095           0        4095

With this patch:
[root@zzxx-yy10 ~]# free -m
              total        used        free      shared  buff/cache   available
Mem:           8133         194        7464          12         475        7338
Swap:          4095           0        4095

Changes made here are completely transparent to how fadump has
traditionally worked.

Thanks to Aneesh Kumar and Anshuman Khandual for helping us understand
CMA and its usage.

TODO:
- Handle case where CMA reservation spans nodes.

Signed-off-by: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-21 11:32:49 +11:00
Michael Ellerman
ec2adcd8dd powerpc: Add some documentation of ISA versions
Add some documentation on which CPU versions map to which ISA
versions. This is all publicly available information, some of it
already in the kernel source, but it's much nicer to have it all in
one place.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-20 22:21:20 +11:00
Henrik Austad
a7ddcea58a Drop all 00-INDEX files from Documentation/
This is a respin with a wider audience (all that get_maintainer returned)
and I know this spams a *lot* of people. Not sure what would be the correct
way, so my apologies for ruining your inbox.

The 00-INDEX files are supposed to give a summary of all files present
in a directory, but these files are horribly out of date and their
usefulness is brought into question. Often a simple "ls" would reveal
the same information as the filenames are generally quite descriptive as
a short introduction to what the file covers (it should not surprise
anyone what Documentation/sched/sched-design-CFS.txt covers)

A few years back it was mentioned that these files were no longer really
needed, and they have since then grown further out of date, so perhaps
it is time to just throw them out.

A short status yields the following _outdated_ 00-INDEX files, first
counter is files listed in 00-INDEX but missing in the directory, last
is files present but not listed in 00-INDEX.

List of outdated 00-INDEX:
Documentation: (4/10)
Documentation/sysctl: (0/1)
Documentation/timers: (1/0)
Documentation/blockdev: (3/1)
Documentation/w1/slaves: (0/1)
Documentation/locking: (0/1)
Documentation/devicetree: (0/5)
Documentation/power: (1/1)
Documentation/powerpc: (0/5)
Documentation/arm: (1/0)
Documentation/x86: (0/9)
Documentation/x86/x86_64: (1/1)
Documentation/scsi: (4/4)
Documentation/filesystems: (2/9)
Documentation/filesystems/nfs: (0/2)
Documentation/cgroup-v1: (0/2)
Documentation/kbuild: (0/4)
Documentation/spi: (1/0)
Documentation/virtual/kvm: (1/0)
Documentation/scheduler: (0/2)
Documentation/fb: (0/1)
Documentation/block: (0/1)
Documentation/networking: (6/37)
Documentation/vm: (1/3)

Then there are 364 subdirectories in Documentation/ with several files that
are missing 00-INDEX alltogether (and another 120 with a single file and no
00-INDEX).

I don't really have an opinion to whether or not we /should/ have 00-INDEX,
but the above 00-INDEX should either be removed or be kept up to date. If
we should keep the files, I can try to keep them updated, but I rather not
if we just want to delete them anyway.

As a starting point, remove all index-files and references to 00-INDEX and
see where the discussion is going.

Signed-off-by: Henrik Austad <henrik@austad.us>
Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Just-do-it-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: [Almost everybody else]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-09-09 15:08:58 -06:00
Michael Neuling
aad15ccc4c powerpc: Document issues with TM on POWER9
Signed-off-by: Michael Neuling <mikey@neuling.org>
Acked-by: Stewart Smith <stewart@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-02 23:54:29 +10:00
Michael Neuling
c6bef2e9e5 powerpc: Document issues with the DAWR on POWER9
Signed-off-by: Michael Neuling <mikey@neuling.org>
Acked-by: Stewart Smith <stewart@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-02 23:54:28 +10:00
Linus Torvalds
d691b7e7d1 powerpc updates for 4.13
Highlights include:
 
  - Support for STRICT_KERNEL_RWX on 64-bit server CPUs.
 
  - Platform support for FSP2 (476fpe) board
 
  - Enable ZONE_DEVICE on 64-bit server CPUs.
 
  - Generic & powerpc spin loop primitives to optimise busy waiting
 
  - Convert VDSO update function to use new update_vsyscall() interface
 
  - Optimisations to hypercall/syscall/context-switch paths
 
  - Improvements to the CPU idle code on Power8 and Power9.
 
 As well as many other fixes and improvements.
 
 Thanks to:
   Akshay Adiga, Andrew Donnellan, Andrew Jeffery, Anshuman Khandual, Anton
   Blanchard, Balbir Singh, Benjamin Herrenschmidt, Christophe Leroy, Christophe
   Lombard, Colin Ian King, Dan Carpenter, Gautham R. Shenoy, Hari Bathini, Ian
   Munsie, Ivan Mikhaylov, Javier Martinez Canillas, Madhavan Srinivasan,
   Masahiro Yamada, Matt Brown, Michael Neuling, Michal Suchanek, Murilo
   Opsfelder Araujo, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Paul
   Mackerras, Pavel Machek, Russell Currey, Santosh Sivaraj, Stephen Rothwell,
   Thiago Jung Bauermann, Yang Li.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZXyPCAAoJEFHr6jzI4aWAI9QQAISf2x5y//cqCi4ISyQB5pTq
 KLS/yQajNkQOw7c0fzBZOaH5Xd/SJ6AcKWDg8yDlpDR3+sRRsr98iIRECgKS5I7/
 DxD9ywcbSoMXFQQo1ZMCp5CeuMUIJRtugBnUQM+JXCSUCPbznCY5DchDTLyTBTpO
 MeMVhI//JxthhoOMA9MudiEGaYCU9ho442Z4OJUSiLUv8WRbvQX9pTqoc4vx1fxA
 BWf2mflztBVcIfKIyxIIIlDLukkMzix6gSYPMCbC7lzkbnU7JSqKiheJXjo1gJS2
 ePHKDxeNR2/QP0g/j3aT/MR1uTt9MaNBSX3gANE1xQ9OoJ8m1sOtCO4gNbSdLWae
 eXhDnoiEp930DRZOeEioOItuWWoxFaMyYk3BMmRKV4QNdYL3y3TRVeL2/XmRGqYL
 Lxz4IY/x5TteFEJNGcRX90uizNSi8AaEXPF16pUk8Ctt6eH3ZSwPMv2fHeYVCMr0
 KFlKHyaPEKEoztyzLcUR6u9QB56yxDN58bvLpd32AeHvKhqyxFoySy59x9bZbatn
 B2y8mmDItg860e0tIG6jrtplpOVvL8i5jla5RWFVoQDuxxrLAds3vG9JZQs+eRzx
 Fiic93bqeUAS6RzhXbJ6QQJYIyhE7yqpcgv7ME1W87SPef3HPBk9xlp3yIDwdA2z
 bBDvrRnvupusz8qCWrxe
 =w8rj
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Highlights include:

   - Support for STRICT_KERNEL_RWX on 64-bit server CPUs.

   - Platform support for FSP2 (476fpe) board

   - Enable ZONE_DEVICE on 64-bit server CPUs.

   - Generic & powerpc spin loop primitives to optimise busy waiting

   - Convert VDSO update function to use new update_vsyscall() interface

   - Optimisations to hypercall/syscall/context-switch paths

   - Improvements to the CPU idle code on Power8 and Power9.

  As well as many other fixes and improvements.

  Thanks to: Akshay Adiga, Andrew Donnellan, Andrew Jeffery, Anshuman
  Khandual, Anton Blanchard, Balbir Singh, Benjamin Herrenschmidt,
  Christophe Leroy, Christophe Lombard, Colin Ian King, Dan Carpenter,
  Gautham R. Shenoy, Hari Bathini, Ian Munsie, Ivan Mikhaylov, Javier
  Martinez Canillas, Madhavan Srinivasan, Masahiro Yamada, Matt Brown,
  Michael Neuling, Michal Suchanek, Murilo Opsfelder Araujo, Naveen N.
  Rao, Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pavel Machek,
  Russell Currey, Santosh Sivaraj, Stephen Rothwell, Thiago Jung
  Bauermann, Yang Li"

* tag 'powerpc-4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (158 commits)
  powerpc/Kconfig: Enable STRICT_KERNEL_RWX for some configs
  powerpc/mm/radix: Implement STRICT_RWX/mark_rodata_ro() for Radix
  powerpc/mm/hash: Implement mark_rodata_ro() for hash
  powerpc/vmlinux.lds: Align __init_begin to 16M
  powerpc/lib/code-patching: Use alternate map for patch_instruction()
  powerpc/xmon: Add patch_instruction() support for xmon
  powerpc/kprobes/optprobes: Use patch_instruction()
  powerpc/kprobes: Move kprobes over to patch_instruction()
  powerpc/mm/radix: Fix execute permissions for interrupt_vectors
  powerpc/pseries: Fix passing of pp0 in updatepp() and updateboltedpp()
  powerpc/64s: Blacklist rtas entry/exit from kprobes
  powerpc/64s: Blacklist functions invoked on a trap
  powerpc/64s: Un-blacklist system_call() from kprobes
  powerpc/64s: Move system_call() symbol to just after setting MSR_EE
  powerpc/64s: Blacklist system_call() and system_call_common() from kprobes
  powerpc/64s: Convert .L__replay_interrupt_return to a local label
  powerpc64/elfv1: Only dereference function descriptor for non-text symbols
  cxl: Export library to support IBM XSL
  powerpc/dts: Use #include "..." to include local DT
  powerpc/perf/hv-24x7: Aggregate result elements on POWER9 SMT8
  ...
2017-07-07 13:55:45 -07:00
Matthew R. Ochs
bc88ac47d5 scsi: cxlflash: Support AFU debug
Adopt the SISLite AFU debug capability to allow future CXL Flash
adapters the ability to better debug AFU issues. Update the SISLite
header with the changes necessary to support AFU debug operations
and create a host ioctl interface for user debug software. Also
update the cxlflash documentation to describe this new host ioctl.

Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-26 15:01:12 -04:00
Matthew R. Ochs
9cf43a3604 scsi: cxlflash: Support LUN provisioning
Adopt the SISLite AFU LUN provisioning capability to allow future CXL
Flash adapters the ability to better manage storage. Update the SISLite
header with the changes necessary to support LUN provision operations
and create a host ioctl interface for user LUN management software. Also
update the cxlflash documentation to describe this new host ioctl.

Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-26 15:01:12 -04:00
Matthew R. Ochs
d6e32f530d scsi: cxlflash: Introduce host ioctl support
As staging for supporting various host management functions, add a host
ioctl infrastructure to filter ioctl commands and perform operations that
are common for all host ioctls. Also update the cxlflash documentation to
create a new section for documenting host ioctls.

Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-26 15:01:11 -04:00
Uma Krishnan
c2c292f450 scsi: cxlflash: Handle AFU sync failures
AFU sync operations are not currently evaluated for failure. This is
acceptable for paths where there is not a dependency on the AFU being
consistent with the host. Examples include link reset events and LUN
cleanup operations. On paths where there is a dependency, such as a LUN
open, a sync failure should be acted upon.

In the event of AFU sync failures, either log or cleanup as appropriate for
operations that are dependent on a successful sync completion.

Update documentation to reflect behavior in the event of an AFU sync
failure.

Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-26 15:01:08 -04:00
Hari Bathini
e7467dc694 powerpc/fadump: Update comment about offset where fadump is reserved
With commit f6e6bedb77 ("powerpc/fadump: Reserve memory at an offset
closer to bottom of RAM"), memory for fadump is no longer reserved at
the top of RAM. But there are still a few places which say so. Change
them appropriately.

Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-06-02 20:16:49 +10:00
Hari Bathini
92019efc6c powerpc/fadump: update documentation about crashkernel parameter reuse
As we are reusing crashkernel parameter instead of fadump_reserve_mem
parameter to specify the memory to reserve for fadump's crash kernel,
update the documentation accordingly.

Link: http://lkml.kernel.org/r/149035347559.6881.14224829694291758581.stgit@hbathini.in.ibm.com
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08 17:15:11 -07:00
Linus Torvalds
7246f60068 powerpc updates for 4.12 part 1.
Highlights include:
 
  - Larger virtual address space on 64-bit server CPUs. By default we use a 128TB
    virtual address space, but a process can request access to the full 512TB by
    passing a hint to mmap().
 
  - Support for the new Power9 "XIVE" interrupt controller.
 
  - TLB flushing optimisations for the radix MMU on Power9.
 
  - Support for CAPI cards on Power9, using the "Coherent Accelerator Interface
    Architecture 2.0".
 
  - The ability to configure the mmap randomisation limits at build and runtime.
 
  - Several small fixes and cleanups to the kprobes code, as well as support for
    KPROBES_ON_FTRACE.
 
  - Major improvements to handling of system reset interrupts, correctly treating
    them as NMIs, giving them a dedicated stack and using a new hypervisor call
    to trigger them, all of which should aid debugging and robustness.
 
 Many fixes and other minor enhancements.
 
 Thanks to:
   Alastair D'Silva, Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan,
   Aneesh Kumar K.V, Anshuman Khandual, Anton Blanchard, Balbir Singh, Ben
   Hutchings, Benjamin Herrenschmidt, Bhupesh Sharma, Chris Packham, Christian
   Zigotzky, Christophe Leroy, Christophe Lombard, Daniel Axtens, David Gibson,
   Gautham R. Shenoy, Gavin Shan, Geert Uytterhoeven, Guilherme G. Piccoli,
   Hamish Martin, Hari Bathini, Kees Cook, Laurent Dufour, Madhavan Srinivasan,
   Mahesh J Salgaonkar, Mahesh Salgaonkar, Masami Hiramatsu, Matt Brown, Matthew
   R. Ochs, Michael Neuling, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran,
   Pan Xinhui, Paul Mackerras, Rashmica Gupta, Russell Currey, Sukadev
   Bhattiprolu, Thadeu Lima de Souza Cascardo, Tobin C. Harding, Tyrel Datwyler,
   Uma Krishnan, Vaibhav Jain, Vipin K Parashar, Yang Shi.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZDHUMAAoJEFHr6jzI4aWAT7oQALkE2Nj3gjcn1z0SkFhq/1iO
 Py9Elmqm4E+L6NKYtBY5dS8xVAJ088ffzERyqJ1FY1LHkB8tn8bWRcMQmbjAFzTI
 V4TAzDNI890BN/F4ptrYRwNFxRBHAvZ4NDunTzagwYnwmTzW9PYHmOi4pvWTo3Tw
 KFUQ0joLSEgHzyfXxYB3fyj41u8N0FZvhfazdNSqia2Y5Vwwv/ION5jKplDM+09Y
 EtVEXFvaKAS1sjbM/d/Jo5rblHfR0D9/lYV10+jjyIokjzslIpyTbnj3izeYoM5V
 I4h99372zfsEjBGPPXyM3khL3zizGMSDYRmJHQSaKxjtecS9SPywPTZ8ufO/aSzV
 Ngq6nlND+f1zep29VQ0cxd3Jh40skWOXzxJaFjfDT25xa6FbfsWP2NCtk8PGylZ7
 EyqTuCWkMgIP02KlX3oHvEB2LRRPCDmRU2zECecRGNJrIQwYC2xjoiVi7Q8Qe8rY
 gr7Ib5Jj/a+uiTcCIy37+5nXq2s14/JBOKqxuYZIxeuZFvKYuRUipbKWO05WDOAz
 m/pSzeC3J8AAoYiqR0gcSOuJTOnJpGhs7zrQFqnEISbXIwLW+ICumzOmTAiBqOEY
 Rt8uW2gYkPwKLrE05445RfVUoERaAjaE06eRMOWS6slnngHmmnRJbf3PcoALiJkT
 ediqGEj0/N1HMB31V5tS
 =vSF3
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Highlights include:

   - Larger virtual address space on 64-bit server CPUs. By default we
     use a 128TB virtual address space, but a process can request access
     to the full 512TB by passing a hint to mmap().

   - Support for the new Power9 "XIVE" interrupt controller.

   - TLB flushing optimisations for the radix MMU on Power9.

   - Support for CAPI cards on Power9, using the "Coherent Accelerator
     Interface Architecture 2.0".

   - The ability to configure the mmap randomisation limits at build and
     runtime.

   - Several small fixes and cleanups to the kprobes code, as well as
     support for KPROBES_ON_FTRACE.

   - Major improvements to handling of system reset interrupts,
     correctly treating them as NMIs, giving them a dedicated stack and
     using a new hypervisor call to trigger them, all of which should
     aid debugging and robustness.

   - Many fixes and other minor enhancements.

  Thanks to: Alastair D'Silva, Alexey Kardashevskiy, Alistair Popple,
  Andrew Donnellan, Aneesh Kumar K.V, Anshuman Khandual, Anton
  Blanchard, Balbir Singh, Ben Hutchings, Benjamin Herrenschmidt,
  Bhupesh Sharma, Chris Packham, Christian Zigotzky, Christophe Leroy,
  Christophe Lombard, Daniel Axtens, David Gibson, Gautham R. Shenoy,
  Gavin Shan, Geert Uytterhoeven, Guilherme G. Piccoli, Hamish Martin,
  Hari Bathini, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Mahesh J
  Salgaonkar, Mahesh Salgaonkar, Masami Hiramatsu, Matt Brown, Matthew
  R. Ochs, Michael Neuling, Naveen N. Rao, Nicholas Piggin, Oliver
  O'Halloran, Pan Xinhui, Paul Mackerras, Rashmica Gupta, Russell
  Currey, Sukadev Bhattiprolu, Thadeu Lima de Souza Cascardo, Tobin C.
  Harding, Tyrel Datwyler, Uma Krishnan, Vaibhav Jain, Vipin K Parashar,
  Yang Shi"

* tag 'powerpc-4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (214 commits)
  powerpc/64s: Power9 has no LPCR[VRMASD] field so don't set it
  powerpc/powernv: Fix TCE kill on NVLink2
  powerpc/mm/radix: Drop support for CPUs without lockless tlbie
  powerpc/book3s/mce: Move add_taint() later in virtual mode
  powerpc/sysfs: Move #ifdef CONFIG_HOTPLUG_CPU out of the function body
  powerpc/smp: Document irq enable/disable after migrating IRQs
  powerpc/mpc52xx: Don't select user-visible RTAS_PROC
  powerpc/powernv: Document cxl dependency on special case in pnv_eeh_reset()
  powerpc/eeh: Clean up and document event handling functions
  powerpc/eeh: Avoid use after free in eeh_handle_special_event()
  cxl: Mask slice error interrupts after first occurrence
  cxl: Route eeh events to all drivers in cxl_pci_error_detected()
  cxl: Force context lock during EEH flow
  powerpc/64: Allow CONFIG_RELOCATABLE if COMPILE_TEST
  powerpc/xmon: Teach xmon oops about radix vectors
  powerpc/mm/hash: Fix off-by-one in comment about kernel contexts ids
  powerpc/pseries: Enable VFIO
  powerpc/powernv: Fix iommu table size calculation hook for small tables
  powerpc/powernv: Check kzalloc() return value in pnv_pci_table_alloc
  powerpc: Add arch/powerpc/tools directory
  ...
2017-05-05 11:36:44 -07:00
Matthew R. Ochs
8fa4f1770d scsi: cxlflash: Remove port configuration assumptions
At present, the cxlflash driver only supports hardware with two FC ports. The
code was initially designed with this assumption and is dependent on having
two FC ports - adding more ports will break logic within the driver.

To mitigate this issue, remove the existing port assumptions and transition
the code to support more than two ports. As a side effect, clarify the
interpretation of the DK_CXLFLASH_ALL_PORTS_ACTIVE flag.

Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-04-13 22:55:41 -04:00
Christophe Lombard
f24be42aab cxl: Add psl9 specific code
The new Coherent Accelerator Interface Architecture, level 2, for the
IBM POWER9 brings new content and features:
- POWER9 Service Layer
- Registers
- Radix mode
- Process element entry
- Dedicated-Shared Process Programming Model
- Translation Fault Handling
- CAPP
- Memory Context ID
    If a valid mm_struct is found the memory context id is used for each
    transaction associated with the process handle. The PSL uses the
    context ID to find the corresponding process element.

Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
[mpe: Fixup comment formatting, unsplit long strings]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-13 23:34:31 +10:00
Hari Bathini
bc183779de powerpc/fadump: Update fadump documentation
With the unnecessary restriction to reserve memory for fadump at the
top of RAM forgone, update the documentation accordingly.

Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-31 22:34:37 +11:00
Linus Torvalds
07021b4359 powerpc updates for 4.9
Highlights:
  - Major rework of Book3S 64-bit exception vectors (Nicholas Piggin)
    - Use gas sections for arranging exception vectors et. al.
  - Large set of TM cleanups and selftests (Cyril Bur)
  - Enable transactional memory (TM) lazily for userspace (Cyril Bur)
  - Support for XZ compression in the zImage wrapper (Oliver O'Halloran)
  - Add support for bpf constant blinding (Naveen N. Rao)
  - Beginnings of upstream support for PA Semi Nemo motherboards (Darren Stevens)
 
 Fixes:
  - Ensure .mem(init|exit).text are within _stext/_etext (Michael Ellerman)
  - xmon: Don't use ld on 32-bit (Michael Ellerman)
  - vdso64: Use double word compare on pointers (Anton Blanchard)
  - powerpc/nvram: Fix an incorrect partition merge (Pan Xinhui)
  - powerpc: Fix usage of _PAGE_RO in hugepage (Christophe Leroy)
  - powerpc/mm: Update FORCE_MAX_ZONEORDER range to allow hugetlb w/4K (Aneesh Kumar K.V)
  - Fix memory leak in queue_hotplug_event() error path (Andrew Donnellan)
  - Replay hypervisor maintenance interrupt first (Nicholas Piggin)
 
 Cleanups & features:
  - Sparse fixes/cleanups (Daniel Axtens)
  - Preserve CFAR value on SLB miss caused by access to bogus address (Paul Mackerras)
  - Radix MMU fixups for POWER9 (Aneesh Kumar K.V)
  - Support for setting used_(vsr|vr|spe) in sigreturn path (for CRIU) (Simon Guo)
  - Optimise syscall entry for virtual, relocatable case (Nicholas Piggin)
  - Optimise MSR handling in exception handling (Nicholas Piggin)
  - Support for kexec with Radix MMU (Benjamin Herrenschmidt)
  - powernv EEH fixes (Russell Currey)
  - Suprise PCI hotplug support for powernv (Gavin Shan)
  - Endian/sparse fixes for powernv PCI (Gavin Shan)
  - Defconfig updates (Anton Blanchard)
  - Various performance optimisations (Anton Blanchard)
    - Align hot loops of memset() and backwards_memcpy()
    - During context switch, check before setting mm_cpumask
    - Remove static branch prediction in atomic{, 64}_add_unless
    - Only disable HAVE_EFFICIENT_UNALIGNED_ACCESS on POWER7 little endian
    - Set default CPU type to POWER8 for little endian builds
 
  - KVM: PPC: Book3S HV: Migrate pinned pages out of CMA (Balbir Singh)
  - cxl: Flush PSL cache before resetting the adapter (Frederic Barrat)
  - cxl: replace loop with for_each_child_of_node(), remove unneeded of_node_put() (Andrew Donnellan)
  - Fix HV facility unavailable to use correct handler (Nicholas Piggin)
  - Remove unnecessary syscall trampoline (Nicholas Piggin)
  - fadump: Fix build break when CONFIG_PROC_VMCORE=n (Michael Ellerman)
  - Quieten EEH message when no adapters are found (Anton Blanchard)
  - powernv: Add PHB register dump debugfs handle (Russell Currey)
  - Use kprobe blacklist for exception handlers & asm functions (Nicholas Piggin)
  - Document the syscall ABI (Nicholas Piggin)
  - MAINTAINERS: Update cxl maintainers (Michael Neuling)
  - powerpc: Remove all usages of NO_IRQ (Michael Ellerman)
 
 Minor cleanups:
  - Andrew Donnellan, Christophe Leroy, Colin Ian King, Cyril Bur, Frederic Barrat,
    Pan Xinhui, PrasannaKumar Muralidharan, Rui Teng, Simon Guo.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJX9x5ZAAoJEFHr6jzI4aWAWQ0P+gOhdtayMsRY0k0dzPmYaFr0
 Ha5v968RJaNIyGGM9ARJg8h27PGMaSlBp/9zaYdk1G7xfv/DMR0uq8d8l5pjy/Zw
 Jm72WE4PEX/zAcQxry6Y2fDdumO09crTBA/W0hM1UZzqu0bcVUfD+E51ZFYWW7yh
 fyhT2YnlucxIcT34pxsLqwTIiZYG4xgN3+YGo0wohY1D1GHE3UZ7SXIglb49yM6v
 ZeXrL7SOdERR1w88rC+g99P/cWng5HDS0wPLUbxGT5KIpoOSXOs7EbZwFqQBUy5O
 37PB07K5dDyUbrm++l5lUigldF3W1OZQBN5+n8PciulxxwFX84pllTlAxv1p60JR
 piEKZ8pl023IF7zMGatUG9qcNOcnbxdMsAhoEhlcFi9ulM/yLzbmRTKVfDYm+O/J
 UI+YtcbsgdyOXMdGXCqdpeBNuuypgLG/g7gC8bnk3taS0LUUZLcXtRNuE4tcPJJe
 v8FnszaLkjAi83Lmzt3fgZo7DI1RIPwDSw6fY+nBrxCRfEPRVx3f7KhmUXvSeol5
 Ln9xpk4AtyQt1RHhckxXwWSUgvXVg2ltmz7ElqK4sQ9mO/D2ZIs6R6fPY4VlJLc4
 /2yIV4RLIsbHmdv9IbJ8PBp0VTugSNdicZ904QiAHSZQv/i1mgYuXw3tjR6kuy9f
 bKOzNJTwLV1WUsOlUpiq
 =Jnn8
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Highlights:
   - Major rework of Book3S 64-bit exception vectors (Nicholas Piggin)
   - Use gas sections for arranging exception vectors et. al.
   - Large set of TM cleanups and selftests (Cyril Bur)
   - Enable transactional memory (TM) lazily for userspace (Cyril Bur)
   - Support for XZ compression in the zImage wrapper (Oliver
     O'Halloran)
   - Add support for bpf constant blinding (Naveen N. Rao)
   - Beginnings of upstream support for PA Semi Nemo motherboards
     (Darren Stevens)

  Fixes:
   - Ensure .mem(init|exit).text are within _stext/_etext (Michael
     Ellerman)
   - xmon: Don't use ld on 32-bit (Michael Ellerman)
   - vdso64: Use double word compare on pointers (Anton Blanchard)
   - powerpc/nvram: Fix an incorrect partition merge (Pan Xinhui)
   - powerpc: Fix usage of _PAGE_RO in hugepage (Christophe Leroy)
   - powerpc/mm: Update FORCE_MAX_ZONEORDER range to allow hugetlb w/4K
     (Aneesh Kumar K.V)
   - Fix memory leak in queue_hotplug_event() error path (Andrew
     Donnellan)
   - Replay hypervisor maintenance interrupt first (Nicholas Piggin)

  Various performance optimisations (Anton Blanchard):
   - Align hot loops of memset() and backwards_memcpy()
   - During context switch, check before setting mm_cpumask
   - Remove static branch prediction in atomic{, 64}_add_unless
   - Only disable HAVE_EFFICIENT_UNALIGNED_ACCESS on POWER7 little
     endian
   - Set default CPU type to POWER8 for little endian builds

  Cleanups & features:
   - Sparse fixes/cleanups (Daniel Axtens)
   - Preserve CFAR value on SLB miss caused by access to bogus address
     (Paul Mackerras)
   - Radix MMU fixups for POWER9 (Aneesh Kumar K.V)
   - Support for setting used_(vsr|vr|spe) in sigreturn path (for CRIU)
     (Simon Guo)
   - Optimise syscall entry for virtual, relocatable case (Nicholas
     Piggin)
   - Optimise MSR handling in exception handling (Nicholas Piggin)
   - Support for kexec with Radix MMU (Benjamin Herrenschmidt)
   - powernv EEH fixes (Russell Currey)
   - Suprise PCI hotplug support for powernv (Gavin Shan)
   - Endian/sparse fixes for powernv PCI (Gavin Shan)
   - Defconfig updates (Anton Blanchard)
   - KVM: PPC: Book3S HV: Migrate pinned pages out of CMA (Balbir Singh)
   - cxl: Flush PSL cache before resetting the adapter (Frederic Barrat)
   - cxl: replace loop with for_each_child_of_node(), remove unneeded
     of_node_put() (Andrew Donnellan)
   - Fix HV facility unavailable to use correct handler (Nicholas
     Piggin)
   - Remove unnecessary syscall trampoline (Nicholas Piggin)
   - fadump: Fix build break when CONFIG_PROC_VMCORE=n (Michael
     Ellerman)
   - Quieten EEH message when no adapters are found (Anton Blanchard)
   - powernv: Add PHB register dump debugfs handle (Russell Currey)
   - Use kprobe blacklist for exception handlers & asm functions
     (Nicholas Piggin)
   - Document the syscall ABI (Nicholas Piggin)
   - MAINTAINERS: Update cxl maintainers (Michael Neuling)
   - powerpc: Remove all usages of NO_IRQ (Michael Ellerman)

  Minor cleanups:
   - Andrew Donnellan, Christophe Leroy, Colin Ian King, Cyril Bur,
     Frederic Barrat, Pan Xinhui, PrasannaKumar Muralidharan, Rui Teng,
     Simon Guo"

* tag 'powerpc-4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (156 commits)
  powerpc/bpf: Add support for bpf constant blinding
  powerpc/bpf: Implement support for tail calls
  powerpc/bpf: Introduce accessors for using the tmp local stack space
  powerpc/fadump: Fix build break when CONFIG_PROC_VMCORE=n
  powerpc: tm: Enable transactional memory (TM) lazily for userspace
  powerpc/tm: Add TM Unavailable Exception
  powerpc: Remove do_load_up_transact_{fpu,altivec}
  powerpc: tm: Rename transct_(*) to ck(\1)_state
  powerpc: tm: Always use fp_state and vr_state to store live registers
  selftests/powerpc: Add checks for transactional VSXs in signal contexts
  selftests/powerpc: Add checks for transactional VMXs in signal contexts
  selftests/powerpc: Add checks for transactional FPUs in signal contexts
  selftests/powerpc: Add checks for transactional GPRs in signal contexts
  selftests/powerpc: Check that signals always get delivered
  selftests/powerpc: Add TM tcheck helpers in C
  selftests/powerpc: Allow tests to extend their kill timeout
  selftests/powerpc: Introduce GPR asm helper header file
  selftests/powerpc: Move VMX stack frame macros to header file
  selftests/powerpc: Rework FPU stack placement macros and move to header file
  selftests/powerpc: Check for VSX preservation across userspace preemption
  ...
2016-10-07 20:19:31 -07:00
Linus Torvalds
4dfddf5036 SCSI misc on 20161006
This update includes the usual round of major driver updates (hpsa, be2iscsi,
 hisi_sas, zfcp, cxlflash).  There's a new incarnation of hpsa called smartpqi
 for which a driver is added, there's some cleanup work of the ibm vscsi target
 and updates to libfc, plus a whole host of minor fixes and updates and finally
 the removal of several ISA drivers which seem not to have been used for years.
 
 Signed-off-by: James Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJX9fZGAAoJEAVr7HOZEZN4TfkP/2bOHBGqyQ16P9jRjWXtC6pJ
 Fp/ZfU6ZrSpcGN49Wr9vyPbpvYKdtIZg3oUs6XhKmnfP+lbeIIJ5jxlEnwBVwWya
 JOOD91o8lLN7zRMuyfYIfgnm4dIU3GSLpnWIyfAhoMH1utiLLcq7s2XEM5girDft
 dVUL20XprtJkVsg2C+hhRAI8PMjWFInadj2eRIHdxJIDC8fXR+w8ojBShou+lf6Q
 /zYPgckTCBlZWIc/ohI3j52r4qmkChgX+3/jR+v9i5bGXjFfpmh0GzxM7tscESSa
 4Y/ZLTg72j/colYkA1jt04YLxA2dQCa6b8DmJIcUTL0WStsJUQH5hFFFHt3mSafI
 HirqRfHpmadHbfi5Kiyx688S5b0oVN4bMxvMoEOAUy7WVaLEr84GJ5VYhoAwkPhL
 USaDx6Hsa1OT0lGYAtyRKOUT/d55grztEOnSxBFiQgRoB8wrGX616Xg8VONy7JZS
 wEZtf1v5K0+ZXJiu4NtY+/RzQdOwu7OQHKfN5mLri8tJ+eo8d88ZwSARJxEZetSM
 P4EVR2ZjhL+Ct78v3i4Yj8FVMXHSzzulj530KQ/U7z/l4c2S54mtEKijDmXmto8k
 baiIah/wgaS/fznoOsJw+Iy/2HqsAtNZsReNcgNPLzfabTBXKSBXJDLmO4d3g/3s
 zwj1m3JtzAx2j3kQrkSv
 =cyTO
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This update includes the usual round of major driver updates (hpsa,
  be2iscsi, hisi_sas, zfcp, cxlflash). There's a new incarnation of hpsa
  called smartpqi for which a driver is added, there's some cleanup work
  of the ibm vscsi target and updates to libfc, plus a whole host of
  minor fixes and updates and finally the removal of several ISA drivers
  which seem not to have been used for years"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (173 commits)
  scsi: mvsas: Mark symbols static where possible
  scsi: pm8001: Mark symbols static where possible
  scsi: arcmsr: Simplify user_len checking
  scsi: fcoe: fix off by one in eth2fc_speed()
  scsi: dtc: remove from tree
  scsi: t128: remove from tree
  scsi: pas16: remove from tree
  scsi: u14-34f: remove from tree
  scsi: ultrastor: remove from tree
  scsi: in2000: remove from tree
  scsi: wd7000: remove from tree
  scsi: scsi_dh_alua: Fix memory leak in alua_rtpg()
  scsi: lpfc: Mark symbols static where possible
  scsi: hpsa: correct call to hpsa_do_reset
  scsi: ufs: Get a TM service response from the correct offset
  scsi: ibmvfc: Fix I/O hang when port is not mapped
  scsi: megaraid_sas: clean function declarations in megaraid_sas_base.c up
  scsi: ipr: Remove redundant messages at adapter init time
  scsi: ipr: Don't log unnecessary 9084 error details
  scsi: smartpqi: raid bypass lba calculation fix
  ...
2016-10-07 09:28:53 -07:00
Nicholas Piggin
7b8845a2a2 powerpc/64: Document the syscall ABI
Add some documentation for the 64-bit syscall ABI, which doesn't seem
to be documented elsewhere.

This attempts to document existing practice. The only small discrepancy
is glibc clobbers not quite matching the kernel (e.g., xer, some
vsyscalls trash cr1 whereas glibc only clobbers cr0). These will be
resolved after this document is merged.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-20 14:36:14 +10:00
Cyril Bur
78a3e8889b powerpc: signals: Discard transaction state from signal frames
Userspace can begin and suspend a transaction within the signal
handler which means they might enter sys_rt_sigreturn() with the
processor in suspended state.

sys_rt_sigreturn() wants to restore process context (which may have
been in a transaction before signal delivery). To do this it must
restore TM SPRS. To achieve this, any transaction initiated within the
signal frame must be discarded in order to be able to restore TM SPRs
as TM SPRs can only be manipulated non-transactionally..
>From the PowerPC ISA:
  TM Bad Thing Exception [Category: Transactional Memory]
   An attempt is made to execute a mtspr targeting a TM register in
   other than Non-transactional state.

Not doing so results in a TM Bad Thing:
[12045.221359] Kernel BUG at c000000000050a40 [verbose debug info unavailable]
[12045.221470] Unexpected TM Bad Thing exception at c000000000050a40 (msr 0x201033)
[12045.221540] Oops: Unrecoverable exception, sig: 6 [#1]
[12045.221586] SMP NR_CPUS=2048 NUMA PowerNV
[12045.221634] Modules linked in: xt_CHECKSUM iptable_mangle ipt_MASQUERADE
 nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4
 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp bridge stp llc ebtable_filter
 ebtables ip6table_filter ip6_tables iptable_filter ip_tables x_tables kvm_hv kvm
 uio_pdrv_genirq ipmi_powernv uio powernv_rng ipmi_msghandler autofs4 ses enclosure
 scsi_transport_sas bnx2x ipr mdio libcrc32c
[12045.222167] CPU: 68 PID: 6178 Comm: sigreturnpanic Not tainted 4.7.0 #34
[12045.222224] task: c0000000fce38600 ti: c0000000fceb4000 task.ti: c0000000fceb4000
[12045.222293] NIP: c000000000050a40 LR: c0000000000163bc CTR: 0000000000000000
[12045.222361] REGS: c0000000fceb7ac0 TRAP: 0700   Not tainted (4.7.0)
[12045.222418] MSR: 9000000300201033 <SF,HV,ME,IR,DR,RI,LE,TM[SE]> CR: 28444280  XER: 20000000
[12045.222625] CFAR: c0000000000163b8 SOFTE: 0 PACATMSCRATCH: 900000014280f033
GPR00: 01100000b8000001 c0000000fceb7d40 c00000000139c100 c0000000fce390d0
GPR04: 900000034280f033 0000000000000000 0000000000000000 0000000000000000
GPR08: 0000000000000000 b000000000001033 0000000000000001 0000000000000000
GPR12: 0000000000000000 c000000002926400 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR24: 0000000000000000 00003ffff98cadd0 00003ffff98cb470 0000000000000000
GPR28: 900000034280f033 c0000000fceb7ea0 0000000000000001 c0000000fce390d0
[12045.223535] NIP [c000000000050a40] tm_restore_sprs+0xc/0x1c
[12045.223584] LR [c0000000000163bc] tm_recheckpoint+0x5c/0xa0
[12045.223630] Call Trace:
[12045.223655] [c0000000fceb7d80] [c000000000026e74] sys_rt_sigreturn+0x494/0x6c0
[12045.223738] [c0000000fceb7e30] [c0000000000092e0] system_call+0x38/0x108
[12045.223806] Instruction dump:
[12045.223841] 7c800164 4e800020 7c0022a6 f80304a8 7c0222a6 f80304b0 7c0122a6 f80304b8
[12045.223955] 4e800020 e80304a8 7c0023a6 e80304b0 <7c0223a6> e80304b8 7c0123a6 4e800020
[12045.224074] ---[ end trace cb8002ee240bae76 ]---

It isn't clear exactly if there is really a use case for userspace
returning with a suspended transaction, however, doing so doesn't (on
its own) constitute a bad frame. As such, this patch simply discards
the transactional state of the context calling the sigreturn and
continues.

Reported-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Tested-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Reviewed-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Acked-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2016-08-29 12:48:40 +10:00
Matthew R. Ochs
9442c9b0ed scsi: cxlflash: Update documentation
Update the block library link in the API documentation.

Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Acked-by: Manoj N. Kumar <manoj@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-08-23 22:24:26 -04:00
Matthew R. Ochs
cd34af40a0 scsi: cxlflash: Transition to application close model
Caching the adapter file descriptor and performing a close on behalf of
an application is a poor design. This is due to the fact that once a
file descriptor in installed, it is free to be altered without the
knowledge of the cxlflash driver. This can lead to inconsistencies
between the application and kernel. Furthermore, the nature of the
former design is more exploitable and thus should be abandoned.

To support applications performing a close on the adapter file that is
associated with a context, a new flag is introduced to the user API to
indicate to applications that they are responsible for the close
following the cleanup (detach) of a context. The documentation is also
updated to reflect this change in behavior.

Inspired-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Acked-by: Manoj N. Kumar <manoj@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-08-23 22:23:41 -04:00
Russell Currey
8ee26530bb powerpc/eeh: rename EEH from "extended" to "enhanced" error handling
IBM online documentation for EEH uses "extended error handling" and
"enhanced error handling" to refer to the same thing, in different
places.  The only place mentioning it as "enhanced error handling" in the
kernel is the MAINTAINERS file, and it's "extended" in some documentation.

IBM originally defined EEH as "enhanced error handling", so standardise
all mentions of EEH to use that term.

Signed-off-by: Russell Currey <ruscur@russell.cc>
Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-11 20:30:42 +10:00
Christophe Lombard
594ff7d067 cxl: Support to flash a new image on the adapter from a guest
The new flash.c file contains the logic to flash a new image on the
adapter, through a hcall. It is an iterative process, with chunks of
data of 1M at a time. There are also 2 phases: write and verify. The
flash operation itself is driven from a user-land tool.
Once flashing is successful, an rtas call is made to update the device
tree with the new properties values for the adapter and the AFU(s)

Add a new char device for the adapter, so that the flash tool can
access the card, even if there is no valid AFU on it.

Co-authored-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com>
Reviewed-by: Manoj Kumar <manoj@linux.vnet.ibm.com>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-09 23:39:56 +11:00
Linus Torvalds
df910390e2 SCSI misc on 20150901
This includes one new driver: cxlflash plus the usual grab bag of updates for
 the major drivers: qla2xxx, ipr, storvsc, pm80xx, hptiop, plus a few assorted
 fixes.
 
 Signed-off-by: James Bottomley <JBottomley@Odin.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABAgAGBQJV5eGiAAoJEDeqqVYsXL0MCpwH/AoneZOPeCx0YdTlyiojasi4
 Kc7ECmV9IJJoMoCbP8grwStvynYyCHDSphYmqopZPRlD021eG8ota2uRTHEGJI+q
 SoiZUlq8ti8xgnD55mubwO+UNF+zoELMyHUok2pGzBoZN5alA6nvKuNY7Hif3P3b
 YMT490oWQLjWmJkMW8TbpMn9nHpW0dfbP323uaggWsMy3CSI707+x36FLi1/ICg6
 MZRyv4aESAcauZGUI5EG+SrIl3OBQX7snsYXyuqD3biGqzbGc3p3L9uWG1qXHDbM
 OSGXhN+our0WYHCV1/UrGz7/IAWW1UU0W2qgCBwkXkDjkXJ4jqd36zLJxeuhSpE=
 =KOmP
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull first round of SCSI updates from James Bottomley:
 "This includes one new driver: cxlflash plus the usual grab bag of
  updates for the major drivers: qla2xxx, ipr, storvsc, pm80xx, hptiop,
  plus a few assorted fixes.

  There's another tranch coming, but I want to incubate it another few
  days in the checkers, plus it includes a mpt2sas separated lifetime
  fix, which Avago won't get done testing until Friday"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (85 commits)
  aic94xx: set an error code on failure
  storvsc: Set the error code correctly in failure conditions
  storvsc: Allow write_same when host is windows 10
  storvsc: use storage protocol version to determine storage capabilities
  storvsc: use correct defaults for values determined by protocol negotiation
  storvsc: Untangle the storage protocol negotiation from the vmbus protocol negotiation.
  storvsc: Use a single value to track protocol versions
  storvsc: Rather than look for sets of specific protocol versions, make decisions based on ranges.
  cxlflash: Remove unused variable from queuecommand
  cxlflash: shift wrapping bug in afu_link_reset()
  cxlflash: off by one bug in cxlflash_show_port_status()
  cxlflash: Virtual LUN support
  cxlflash: Superpipe support
  cxlflash: Base error recovery support
  qla2xxx: Update driver version to 8.07.00.26-k
  qla2xxx: Add pci device id 0x2261.
  qla2xxx: Fix missing device login retries.
  qla2xxx: do not clear slot in outstanding cmd array
  qla2xxx: Remove decrement of sp reference count in abort handler.
  qla2xxx: Add support to show MPI and PEP FW version for ISP27xx.
  ...
2015-09-02 12:22:54 -07:00
Matthew R. Ochs
2cb79266d6 cxlflash: Virtual LUN support
Add support for physical LUN segmentation (virtual LUNs) to device
driver supporting the IBM CXL Flash adapter. This patch allows user
space applications to virtually segment a physical LUN into N virtual
LUNs, taking advantage of the translation features provided by this
adapter.

Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Manoj N. Kumar <manoj@linux.vnet.ibm.com>
Reviewed-by: Michael Neuling <mikey@neuling.org>
Reviewed-by: Wen Xiong <wenxiong@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26 18:05:39 -07:00
Matthew R. Ochs
65be2c79ac cxlflash: Superpipe support
Add superpipe supporting infrastructure to device driver for the IBM CXL
Flash adapter. This patch allows userspace applications to take advantage
of the accelerated I/O features that this adapter provides and bypass the
traditional filesystem stack.

Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Manoj N. Kumar <manoj@linux.vnet.ibm.com>
Reviewed-by: Michael Neuling <mikey@neuling.org>
Reviewed-by: Wen Xiong <wenxiong@linux.vnet.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26 18:04:37 -07:00
Masanari Iida
dc12f20ba0 Doc: powerpc: Fix typos in Documentation/powerpc
This patch fix some spelling typo found in Documentation/powerpc.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2015-07-10 14:00:51 -06:00
Sam bobroff
b4b56f9eca powerpc/tm: Abort syscalls in active transactions
This patch changes the syscall handler to doom (tabort) active
transactions when a syscall is made and return very early without
performing the syscall and keeping side effects to a minimum (no CPU
accounting or system call tracing is performed). Also included is a
new HWCAP2 bit, PPC_FEATURE2_HTM_NOSC, to indicate this
behaviour to userspace.

Currently, the system call instruction automatically suspends an
active transaction which causes side effects to persist when an active
transaction fails.

This does change the kernel's behaviour, but in a way that was
documented as unsupported.  It doesn't reduce functionality as
syscalls will still be performed after tsuspend; it just requires that
the transaction be explicitly suspended.  It also provides a
consistent interface and makes the behaviour of user code
substantially the same across powerpc and platforms that do not
support suspended transactions (e.g. x86 and s390).

Performance measurements using
http://ozlabs.org/~anton/junkcode/null_syscall.c indicate the cost of
a normal (non-aborted) system call increases by about 0.25%.

Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-19 17:10:28 +10:00