This patch eliminates height parameters from function gfs2_bmap_alloc.
Function find_metapath determines the metapath's "find height", also
known as the desired height. Function lookup_metapath determines the
metapath's "actual height", previously known as starting height or
sheight. Function gfs2_bmap_alloc now gets both height values from
the metapath. This simplification was done as a step toward switching
the block_map functions to using iomap. The bh_map responsibilities
are also removed from function gfs2_bmap_alloc for the same reason.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This tag is meant for pulling a patch called "gfs2: Fix
debugfs glocks dump" which fixes a regression introduced
by commit 88ffbf3e03. The regression caused the glock
dump in debugfs to not report all the glocks, which makes
debugging extremely difficult.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZyUI8AAoJENeLYdPf93o7iq4IAKhb9wJ8kmpu7LZ5k6Fl8BCy
GFztPe2bKsFG8cul1o1gZx8c/GWORaCHe3ZDI6pxl16/E+AvWoA1pKbBLYB1GSvD
90a7/m6+hx02ZXR/MHxBUQLWYXBtBrVMVcZDCmFMHWYCRUIiX2etPZL8wOXeJLTl
lNCSGdd1+3y6IJbthaIKTt1ctzsR8ZqV4QN786d2C3L9dxZ63FnAV43p3rUBzBLX
B5uT5LTmdWSLRqe0A9rnrPga/BfEnA8GDtIYUMic9Yz0Hq2a3vEnCC3P3Myp0DJZ
PGposwqL/emRhXkC4+ICrGsTOIy1BzwMXLF47GQaB/k+2Rd3/l9r/hU5ESjQOgA=
=taQL
-----END PGP SIGNATURE-----
Merge tag 'gfs2-for-linus-4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fix from Bob Peterson:
"GFS2: Fix an old regression in GFS2's debugfs interface
This fixes a regression introduced by commit 88ffbf3e03 ("GFS2: Use
resizable hash table for glocks"). The regression caused the glock dump
in debugfs to not report all the glocks, which makes debugging
extremely difficult"
* tag 'gfs2-for-linus-4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Fix debugfs glocks dump
Three-entry POSIX ACLs can be stored in the file mode permission bits,
with no need to store them in extended attributes. When a process sets
such a minimal ACL, the kernel updates the file mode like chmod does,
and removes any existing extended attributes for that ACL. Make sure
the ctime is always updated in that case.
Fixes xfstest generic/307.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
When inodes are read from disk, GFS2 will only update in-memory atimes
older than the on-disk atimes; this prevents atimes from going
backwards. The atimes of newly allocated inodes are initialized to 0.
This means that when an atime is explicitly set to a negative value,
this value will not persist.
Fix by setting the atime of newly allocated inodes to the lowest
possible value instead of 0.
Fixes xfstest generic/258.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
The FS_IOC_SETFLAGS ioctl is supposed to update the inode ctime.
Fixes xfstests generic/277.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Add a comment about the logical block size for directories. Rename
"bsize" in gfs2_block_map to "factor". Fix a typo in the description of
metaptr1.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
The switch to rhashtables (commit 88ffbf3e03) broke the debugfs glock
dump (/sys/kernel/debug/gfs2/<device>/glocks) for dumps bigger than a
single buffer: the right function for restarting an rhashtable iteration
from the beginning of the hash table is rhashtable_walk_enter;
rhashtable_walk_stop + rhashtable_walk_start will just resume from the
current position.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Cc: stable@vger.kernel.org # v4.3+
Pull mount flag updates from Al Viro:
"Another chunk of fmount preparations from dhowells; only trivial
conflicts for that part. It separates MS_... bits (very grotty
mount(2) ABI) from the struct super_block ->s_flags (kernel-internal,
only a small subset of MS_... stuff).
This does *not* convert the filesystems to new constants; only the
infrastructure is done here. The next step in that series is where the
conflicts would be; that's the conversion of filesystems. It's purely
mechanical and it's better done after the merge, so if you could run
something like
list=$(for i in MS_RDONLY MS_NOSUID MS_NODEV MS_NOEXEC MS_SYNCHRONOUS MS_MANDLOCK MS_DIRSYNC MS_NOATIME MS_NODIRATIME MS_SILENT MS_POSIXACL MS_KERNMOUNT MS_I_VERSION MS_LAZYTIME; do git grep -l $i fs drivers/staging/lustre drivers/mtd ipc mm include/linux; done|sort|uniq|grep -v '^fs/namespace.c$')
sed -i -e 's/\<MS_RDONLY\>/SB_RDONLY/g' \
-e 's/\<MS_NOSUID\>/SB_NOSUID/g' \
-e 's/\<MS_NODEV\>/SB_NODEV/g' \
-e 's/\<MS_NOEXEC\>/SB_NOEXEC/g' \
-e 's/\<MS_SYNCHRONOUS\>/SB_SYNCHRONOUS/g' \
-e 's/\<MS_MANDLOCK\>/SB_MANDLOCK/g' \
-e 's/\<MS_DIRSYNC\>/SB_DIRSYNC/g' \
-e 's/\<MS_NOATIME\>/SB_NOATIME/g' \
-e 's/\<MS_NODIRATIME\>/SB_NODIRATIME/g' \
-e 's/\<MS_SILENT\>/SB_SILENT/g' \
-e 's/\<MS_POSIXACL\>/SB_POSIXACL/g' \
-e 's/\<MS_KERNMOUNT\>/SB_KERNMOUNT/g' \
-e 's/\<MS_I_VERSION\>/SB_I_VERSION/g' \
-e 's/\<MS_LAZYTIME\>/SB_LAZYTIME/g' \
$list
and commit it with something along the lines of 'convert filesystems
away from use of MS_... constants' as commit message, it would save a
quite a bit of headache next cycle"
* 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
VFS: Differentiate mount flags (MS_*) from internal superblock flags
VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb)
vfs: Add sb_rdonly(sb) to query the MS_RDONLY flag on s_flags
Pull block layer updates from Jens Axboe:
"This is the first pull request for 4.14, containing most of the code
changes. It's a quiet series this round, which I think we needed after
the churn of the last few series. This contains:
- Fix for a registration race in loop, from Anton Volkov.
- Overflow complaint fix from Arnd for DAC960.
- Series of drbd changes from the usual suspects.
- Conversion of the stec/skd driver to blk-mq. From Bart.
- A few BFQ improvements/fixes from Paolo.
- CFQ improvement from Ritesh, allowing idling for group idle.
- A few fixes found by Dan's smatch, courtesy of Dan.
- A warning fixup for a race between changing the IO scheduler and
device remova. From David Jeffery.
- A few nbd fixes from Josef.
- Support for cgroup info in blktrace, from Shaohua.
- Also from Shaohua, new features in the null_blk driver to allow it
to actually hold data, among other things.
- Various corner cases and error handling fixes from Weiping Zhang.
- Improvements to the IO stats tracking for blk-mq from me. Can
drastically improve performance for fast devices and/or big
machines.
- Series from Christoph removing bi_bdev as being needed for IO
submission, in preparation for nvme multipathing code.
- Series from Bart, including various cleanups and fixes for switch
fall through case complaints"
* 'for-4.14/block' of git://git.kernel.dk/linux-block: (162 commits)
kernfs: checking for IS_ERR() instead of NULL
drbd: remove BIOSET_NEED_RESCUER flag from drbd_{md_,}io_bio_set
drbd: Fix allyesconfig build, fix recent commit
drbd: switch from kmalloc() to kmalloc_array()
drbd: abort drbd_start_resync if there is no connection
drbd: move global variables to drbd namespace and make some static
drbd: rename "usermode_helper" to "drbd_usermode_helper"
drbd: fix race between handshake and admin disconnect/down
drbd: fix potential deadlock when trying to detach during handshake
drbd: A single dot should be put into a sequence.
drbd: fix rmmod cleanup, remove _all_ debugfs entries
drbd: Use setup_timer() instead of init_timer() to simplify the code.
drbd: fix potential get_ldev/put_ldev refcount imbalance during attach
drbd: new disk-option disable-write-same
drbd: Fix resource role for newly created resources in events2
drbd: mark symbols static where possible
drbd: Send P_NEG_ACK upon write error in protocol != C
drbd: add explicit plugging when submitting batches
drbd: change list_for_each_safe to while(list_first_entry_or_null)
drbd: introduce drbd_recv_header_maybe_unplug
...
-----BEGIN PGP SIGNATURE-----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=LLY3
-----END PGP SIGNATURE-----
Merge tag 'wberr-v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull writeback error handling updates from Jeff Layton:
"This pile continues the work from last cycle on better tracking
writeback errors. In v4.13 we added some basic errseq_t infrastructure
and converted a few filesystems to use it.
This set continues refining that infrastructure, adds documentation,
and converts most of the other filesystems to use it. The main
exception at this point is the NFS client"
* tag 'wberr-v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
ecryptfs: convert to file_write_and_wait in ->fsync
mm: remove optimizations based on i_size in mapping writeback waits
fs: convert a pile of fsync routines to errseq_t based reporting
gfs2: convert to errseq_t based writeback error reporting for fsync
fs: convert sync_file_range to use errseq_t based error-tracking
mm: add file_fdatawait_range and file_write_and_wait
fuse: convert to errseq_t based error tracking for fsync
mm: consolidate dax / non-dax checks for writeback
Documentation: add some docs for errseq_t
errseq: rename __errseq_set to errseq_set
because we held some back from the previous merge window until we
could get them perfected and well tested. We have a couple patch
sets, including my patch set for protecting glock gl_object and
Andreas Gruenbacher's patch set to fix the long-standing shrink-
slab hang, plus a bunch of assorted bugs and cleanups:
1. I fixed a bug whereby an IO error would lead to a double-brelse.
2. Andreas Gruenbacher made a minor cleanup to call his relatively
new function, gfs2_holder_initialized, rather than doing it
manually. This was just missed by a previous patch set.
3. Jan Kara fixed a bug whereby the SGID was being cleared when
inheriting ACLs.
4. Andreas found a bug and fixed it in his previous patch,
"Get rid of flush_delayed_work in gfs2_evict_inode". A call to
flush_delayed_work was deleted from *gfs2_inode_lookup and added
to gfs2_create_inode.
5. Wang Xibo found and fixed a list_add call in inode_go_lock
that specified the parameters in the wrong order.
6. Coly Li submitted a patch to add the REQ_PRIO to some of GFS2's
metadata reads that were accidentally missing them.
7 - 10. I submitted a 4-patch set to protect the glock gl_object
field. GFS2 was setting and checking gl_object with no locking
mechanism, so the value was occasionally stomped on, which caused
file system corruption.
11. I submitted a small cleanup to function gfs2_clear_rgrpd.
It was needlessly adding rgrp glocks to the lru list, then pulling
them back off immediately. The rgrp glocks don't use the lru list
anyway, so doing so was just a waste of time.
12. I submitted a patch that checks the GLOF_LRU flag on a glock
before trying to remove it from the lru_list. This avoids a lot
of unnecessary spin_lock contention.
13. I submitted a patch to delete GFS2's debugfs files only after
we evict all the glocks. Before this patch, GFS2 would delete the
debugfs files, and if unmount hung waiting for a glock, there was
no way to debug the problem. Now, if a hang occurs during umount,
we can examine the debugfs files to figure out why it's hung.
14. Andreas Gruenbacher submitted a patch to fix some trivial typos.
15 - 19. Andreas also submitted a five-part patch set to fix the
longstanding hang involving the slab shrinker: dlm requires
memory, calls the inode shrinker, which calls gfs2's evict, which
calls back into DLM before it can evict an inode.
20. Abhi Das submitted a patch to forcibly flush the active items
list to relieve memory pressure. This fixes a long-standing bug
whereby GFS2 was getting hung permanently in balance_dirty_pages.
21. Thomas Tai submitted a patch to fix a slab corruption problem
due to a residual pointer left in the lock_dlm lockstruct.
22. I submitted a patch to withdraw the file system if IO errors
are encountered while writing to the journals or statfs system
file which were previously not being sent back up. Before, some
IO errors were sometimes not be detected for several hours, and
at recovery time, the journal errors made journal replay
impossible.
23. Andreas has a patch to fix an annoying format-truncation compiler
warning so GFS2 compiles cleanly.
24. I have a patch that fixes a handful of sparse compiler warnings.
25. Andreas fixed up an useless gl_object warning caused by an
earlier patch.
26. Arvind Yadav added a patch to properly constify our rhashtable
params declare.
27. I added a patch to fix a regression caused by the non-recursive
delete and truncate patch that caused file system blocks to not
be properly freed.
28. Ernesto A. Fernández added a patch to fix a place where GFS2
would send back the wrong return code setting extended attributes.
29. Ernesto also added a patch to fix a case in which GFS2 was
improperly setting an inode's i_mode, potentially granting access
to the wrong users.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZrMC2AAoJENeLYdPf93o7PIQIAKY4hdC2pMM5tiiIHx5fPAAr
tjpVuFkDQzyEaTb9sArVLxEdva3ShKERQKoYq/VVxqbAEwPgXbzJFNNil1WTJi1t
J2gE4wE4G5x1+A7XDzCdPI8KAcF+yX63AaFYlVKyuZSq5w7njIRc1Vk+TFiIexxC
xb0nP0g9L6Zt114rE8kfi0/GLjTO9vOKM3XsJgG612I3/cs3RUx4gJ+nSUG0bYLA
qoBIXEJ3SFHw2Zr/LgHZ9QDHnlPVl3bjg03sRQaWZms7XbLegDBYsDSvS1HLZ300
gjTc0Dgz/6KwzDVJ7cZ/fPNYtIFY58tKs6aqqDTrCncsX9nPjcTAxYkBNWsFyZM=
=tXJ8
-----END PGP SIGNATURE-----
Merge tag 'gfs2-4.14.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull GFS2 updates from Bob Peterson:
"We've got a whopping 29 GFS2 patches for this merge window, mainly
because we held some back from the previous merge window until we
could get them perfected and well tested. We have a couple patch sets,
including my patch set for protecting glock gl_object and Andreas
Gruenbacher's patch set to fix the long-standing shrink- slab hang,
plus a bunch of assorted bugs and cleanups.
Summary:
- I fixed a bug whereby an IO error would lead to a double-brelse.
- Andreas Gruenbacher made a minor cleanup to call his relatively new
function, gfs2_holder_initialized, rather than doing it manually.
This was just missed by a previous patch set.
- Jan Kara fixed a bug whereby the SGID was being cleared when
inheriting ACLs.
- Andreas found a bug and fixed it in his previous patch, "Get rid of
flush_delayed_work in gfs2_evict_inode". A call to
flush_delayed_work was deleted from *gfs2_inode_lookup and added to
gfs2_create_inode.
- Wang Xibo found and fixed a list_add call in inode_go_lock that
specified the parameters in the wrong order.
- Coly Li submitted a patch to add the REQ_PRIO to some of GFS2's
metadata reads that were accidentally missing them.
- I submitted a 4-patch set to protect the glock gl_object field.
GFS2 was setting and checking gl_object with no locking mechanism,
so the value was occasionally stomped on, which caused file system
corruption.
- I submitted a small cleanup to function gfs2_clear_rgrpd. It was
needlessly adding rgrp glocks to the lru list, then pulling them
back off immediately. The rgrp glocks don't use the lru list
anyway, so doing so was just a waste of time.
- I submitted a patch that checks the GLOF_LRU flag on a glock before
trying to remove it from the lru_list. This avoids a lot of
unnecessary spin_lock contention.
- I submitted a patch to delete GFS2's debugfs files only after we
evict all the glocks. Before this patch, GFS2 would delete the
debugfs files, and if unmount hung waiting for a glock, there was
no way to debug the problem. Now, if a hang occurs during umount,
we can examine the debugfs files to figure out why it's hung.
- Andreas Gruenbacher submitted a patch to fix some trivial typos.
- Andreas also submitted a five-part patch set to fix the
longstanding hang involving the slab shrinker: dlm requires memory,
calls the inode shrinker, which calls gfs2's evict, which calls
back into DLM before it can evict an inode.
- Abhi Das submitted a patch to forcibly flush the active items list
to relieve memory pressure. This fixes a long-standing bug whereby
GFS2 was getting hung permanently in balance_dirty_pages.
- Thomas Tai submitted a patch to fix a slab corruption problem due
to a residual pointer left in the lock_dlm lockstruct.
- I submitted a patch to withdraw the file system if IO errors are
encountered while writing to the journals or statfs system file
which were previously not being sent back up. Before, some IO
errors were sometimes not be detected for several hours, and at
recovery time, the journal errors made journal replay impossible.
- Andreas has a patch to fix an annoying format-truncation compiler
warning so GFS2 compiles cleanly.
- I have a patch that fixes a handful of sparse compiler warnings.
- Andreas fixed up an useless gl_object warning caused by an earlier
patch.
- Arvind Yadav added a patch to properly constify our rhashtable
params declare.
- I added a patch to fix a regression caused by the non-recursive
delete and truncate patch that caused file system blocks to not be
properly freed.
- Ernesto A. Fernández added a patch to fix a place where GFS2 would
send back the wrong return code setting extended attributes.
- Ernesto also added a patch to fix a case in which GFS2 was
improperly setting an inode's i_mode, potentially granting access
to the wrong users"
* tag 'gfs2-4.14.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (29 commits)
gfs2: preserve i_mode if __gfs2_set_acl() fails
gfs2: don't return ENODATA in __gfs2_xattr_set unless replacing
GFS2: Fix non-recursive truncate bug
gfs2: constify rhashtable_params
GFS2: Fix gl_object warnings
GFS2: Fix up some sparse warnings
gfs2: Silence gcc format-truncation warning
GFS2: Withdraw for IO errors writing to the journal or statfs
gfs2: fix slab corruption during mounting and umounting gfs file system
gfs2: forcibly flush ail to relieve memory pressure
gfs2: Clean up waiting on glocks
gfs2: Defer deleting inodes under memory pressure
gfs2: gfs2_evict_inode: Put glocks asynchronously
gfs2: Get rid of gfs2_set_nlink
gfs2: gfs2_glock_get: Wait on freeing glocks
gfs2: Fix trivial typos
GFS2: Delete debugfs files only after we evict the glocks
GFS2: Don't waste time locking lru_lock for non-lru glocks
GFS2: Don't bother trying to add rgrps to the lru list
GFS2: Clear gl_object when deleting an inode in gfs2_delete_inode
...
When changing a file's acl mask, __gfs2_set_acl() will first set the
group bits of i_mode to the value of the mask, and only then set the
actual extended attribute representing the new acl.
If the second part fails (due to lack of space, for example) and the
file had no acl attribute to begin with, the system will from now on
assume that the mask permission bits are actual group permission bits,
potentially granting access to the wrong users.
Prevent this by only changing the inode mode after the acl has been set.
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
The function __gfs2_xattr_set() will return -ENODATA when called to
remove a xattr that does not exist. The result is that setfacl will
show an exit status of 1 when called to set only a file's mode bits
(on a file with no ACLs), despite succeeding. A "No data available"
error will be printed as well.
To fix this return 0 instead, except when the XATTR_REPLACE flag is
set, in which case -ENODATA is appropriate. This is consistent with
how most other xattr setting functions work, in other filesystems.
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch if you truncated a file to a smaller size it
wasn't freeing all the blocks properly. There are two reasons.
First, the metapath comparison was not comparing previous heights.
I added a function, mp_eq_to_hgt, which checks the metapath at
all heights prior to the target height.
Second, in function find_nonnull_ptr, it needed to zero out all
pointers for heights following the target height. Translated into
decimal integer terms, this way a number like 299, when incremented,
becomes 300, not 399. The 2 gets incremented to 3, and the following
digits need to be reset.
These two things allow the truncate state machine to properly find
the blocks it needs to delete.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
rhashtable_params are not supposed to change at runtime. All
Functions rhashtable_* working with const rhashtable_params
provided by <linux/rhashtable.h>. So mark the non-const structs
as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
The following cleanup is needed to avoid spilling the syslog with
false warnings.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
This patch cleans up various pieces of GFS2 to avoid sparse errors.
This doesn't fix them all, but it fixes several. The first error,
in function glock_hash_walk was a genuine bug where the rhashtable
could be started and not stopped.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Enlarge sd_fsname to be big enough for the longest long lock table name
and an arbitrary journal number. This silences two -Wformat-truncation
warnings with gcc 7.1.1.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, if GFS2 encountered IO errors while writing to
the journal, it would not report the problem, so they would go
unnoticed, sometimes for many hours. Sometimes this would only be
noticed later, when recovery tried to do journal replay and failed
due to invalid metadata at the blocks that resulted in IO errors.
This patch makes GFS2's log daemon check for IO errors. If it
encounters one, it withdraws from the file system and reports
why in dmesg. A similar action is taken when IO errors occur when
writing to the system statfs file.
These errors are also reported back to any callers of fsync, since
that requires the journal to be flushed. Therefore, any IO errors
that would previously go unnoticed are now noticed and the file
system is withdrawn as early as possible, thus preventing further
file system damage.
Also note that this reintroduces superblock variable sd_log_error,
which Christoph removed with commit f729b66fca.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
This way we don't need a block_device structure to submit I/O. The
block_device has different life time rules from the gendisk and
request_queue and is usually only available when the block device node
is open. Other callers need to explicitly create one (e.g. the lightnvm
passthrough code, or the new nvme multipathing code).
For the actual I/O path all that we need is the gendisk, which exists
once per block device. But given that the block layer also does
partition remapping we additionally need a partition index, which is
used for said remapping in generic_make_request.
Note that all the block drivers generally want request_queue or
sometimes the gendisk, so this removes a layer of indirection all
over the stack.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When using cman-3.0.12.1 and gfs2-utils-3.0.12.1, mounting and
unmounting GFS2 file system would cause kernel to hang. The slab
allocator suggests that it is likely a double free memory corruption.
The issue is traced back to v3.9-rc6 where a patch is submitted to
use kzalloc() for storing a bitmap instead of using a local variable.
The intention is to allocate memory during mount and to free memory
during unmount. The original patch misses a code path which has
already freed the memory and caused memory corruption. This patch sets
the memory pointer to NULL after the memory is freed, so that double
free memory corruption will not happen.
gdlm_mount()
'-- set_recover_size() which use kzalloc()
'-- if dlm does not support ops callbacks then
'--- free_recover_size() which use kfree()
gldm_unmount()
'-- free_recover_size() which use kfree()
Previous patch which introduced the double free issue is
commit 57c7310b8e ("GFS2: use kmalloc for lvb bitmap")
Signed-off-by: Thomas Tai <thomas.tai@oracle.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
On systems with low memory, it is possible for gfs2 to infinitely
loop in balance_dirty_pages() under heavy IO (creating sparse files).
balance_dirty_pages() attempts to write out the dirty pages via
gfs2_writepages() but none are found because these dirty pages are
being used by the journaling code in the ail. Normally, the journal
has an upper threshold which when hit triggers an automatic flush
of the ail. But this threshold can be higher than the number of
allowable dirty pages and result in the ail never being flushed.
This patch forces an ail flush when gfs2_writepages() fails to write
anything. This is a good indication that the ail might be holding
some dirty pages.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
The prepare_to_wait_on_glock and finish_wait_on_glock functions introduced in
commit 56a365be "gfs2: gfs2_glock_get: Wait on freeing glocks" are
better removed, resulting in cleaner code.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
When under memory pressure and an inode's link count has dropped to
zero, defer deleting the inode to the delete workqueue. This avoids
calling into DLM under memory pressure, which can deadlock.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
gfs2_evict_inode is called to free inodes under memory pressure. The
function calls into DLM when an inode's last cluster-wide reference goes
away (remote unlink) and to release the glock and associated DLM lock
before finally destroying the inode. However, if DLM is blocked on
memory to become available, calling into DLM again will deadlock.
Avoid that by decoupling releasing glocks from destroying inodes in that
case: with gfs2_glock_queue_put, glocks will be dequeued asynchronously
in work queue context, when the associated inodes have likely already
been destroyed.
With this change, inodes can end up being unlinked, remote-unlink can be
triggered, and then the inode can be reallocated before all
remote-unlink callbacks are processed. To detect that, revalidate the
link count in gfs2_evict_inode to make sure we're not deleting an
allocated, referenced inode.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Remove gfs2_set_nlink which prevents the link count of an inode from
becoming non-zero once it has reached zero. The next commit reduces the
amount of waiting on glocks when an inode is evicted from memory. With
that, an inode can become reallocated before all the remote-unlink
callbacks from a previous delete are processed, which causes the link
count to change from zero to non-zero.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Keep glocks in their hash table until they are freed instead of removing
them when their last reference is dropped. This allows to wait for any
previous instances of a glock to go away in gfs2_glock_get before
creating a new glocks.
Special thanks to Andy Price for finding and fixing a problem which also
required us to delete the rcu_read_unlock from the error case in function
gfs2_glock_get.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
This patch moves the call to gfs2_delete_debugfs_file so that it
comes after the glock hash table has been cleared. This way we
can query the debugfs files if umount hangs.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, glock_dq would call gfs2_glock_remove_from_lru.
For glocks that are never put on the LRU, such as the transaction
glock, this just takes the spin_lock, determines there's nothing to
be done because the list is empty, then unlocks again. This was
causing unnecessary lock contention on the lru_lock spin_lock.
This patch adds a check for GLOF_LRU in the glops before taking
the spin_lock.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
This patch removes a call to gfs2_glock_add_to_lru from function
gfs2_clear_rgrpd. The call is just a waste of time because as soon
as it adds it to the lru_list, the call to gfs2_glock_put takes it
back off again.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
This patch adds some calls to clear gl_object in function
gfs2_delete_inode. Since we are deleting the inode, and the glock
typically outlives the inode in core, we must clear gl_object
so subsequent use of the glock (e.g. for a new inode in its place)
will not have the old pointer sitting there. In error cases we
need to tidy up after ourselves. In non-error cases, we need to
clear gl_object before we set the block free in the bitmap so
residules aren't left for potential inode creators.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
If function gfs2_create_inode fails after the inode has been
created (for example, if the inode_refresh fails for some reason)
the function was setting gl_object but never clearing it again.
The glocks are left pointing to a freed inode. This patch adds
the calls to clear gl_object in the appropriate error paths.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, the inode glock's gl_object was set after a
reference was acquired, but before the block type was verified.
In cases where the block was unlinked, then freed and reused on
another node, a residule delete callback (delete_work) would try
to look up the inode, eventually failing the block check, but
only after it overwrites gl_object with a pointer to the wrong
inode. This patch moves the assignment of gl_object after the
block check so it won't be improperly overwritten.
Likewise, at the end of the function, gfs2_inode_lookup was
clearing gl_object after it unlocked the glock, which meant
another process might free the glock in the meantime. This
patch guards against that case.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch introduces a new helper function in glock.h that
clears gl_object, with an added integrity check. An additional
integrity check has been added to glock_set_object, plus comments.
This is step 1 in a series to ensure gl_object integrity.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
When gfs2 does metadata I/O, only REQ_META is used as a metadata hint of
the bio. But flag REQ_META is just a hint for block trace, not for block
layer code to handle a bio as metadata request.
For some of metadata I/Os of gfs2, A REQ_PRIO flag on the metadata bio
would be very informative to block layer code. For example, if bcache is
used as a I/O cache for gfs2, it will be possible for bcache code to get
the hint and cache the pre-fetched metadata blocks on cache device. This
behavior may be helpful to improve metadata I/O performance if the
following requests hit the cache.
Here are the locations in gfs2 code where a REQ_PRIO flag should be added,
- All places where REQ_READAHEAD is used, gfs2 code uses this flag for
metadata read ahead.
- In gfs2_meta_rq() where the first metadata block is read in.
- In gfs2_write_buf_to_page(), read in quota metadata blocks to have them
up to date.
These metadata blocks are probably to be accessed again in future, adding
a REQ_PRIO flag may have bcache to keep such metadata in fast cache
device. For system without a cache layer, REQ_PRIO can still provide hint
to block layer to handle metadata requests more properly.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
In inode_go_lock() function, the parameter order of list_add() is error.
According to the define of list_add(), the first parameter is new entry
and the second is the list head, so ip->i_trunc_list should be the
first parameter and the sdp->sd_trunc_list should be second.
Signed-off-by: Wang Xibo<wang.xibo@zte.com.cn>
Signed-off-by: Xiao Likun<xiao.likun@zte.com.cn>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
When commit 4fd1a57952 moved the call to flush_delayed_work from
gfs2_evict_inode to gfs2_inode_lookup to avoid calling into DLM during
evict, a similar call should have been added to gfs2_create_inode:
that's another code path in which glocks of previous inodes may be
reused.
The flush of the iopen glock work queue added by 4fd1a57952, on the
other hand, is unnecessary and can be removed.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
When new directory 'DIR1' is created in a directory 'DIR0' with SGID bit
set, DIR1 is expected to have SGID bit set (and owning group equal to
the owning group of 'DIR0'). However when 'DIR0' also has some default
ACLs that 'DIR1' inherits, setting these ACLs will result in SGID bit on
'DIR1' to get cleared if user is not member of the owning group.
Fix the problem by moving posix_acl_update_mode() out of
__gfs2_set_acl() into gfs2_set_acl(). That way the function will not be
called when inheriting ACLs which is what we want as it prevents SGID
bit clearing and the mode has been properly set by posix_acl_create()
anyway.
Fixes: 073931017b
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Function gfs2_holder_initialized should be used in do_flock as well.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, problems reading in indirect buffers would send
an IO error back to the caller, and release the buffer_head with
brelse() in function gfs2_meta_indirect_buffer, however, it would
still return the address of the buffer_head it released. After the
error was discovered, function gfs2_block_map would call function
release_metapath to free all buffers. That checked:
if (mp->mp_bh[i] == NULL) but since the value was set after the
error, it was non-zero, so brelse was called a second time. This
resulted in the following error:
kernel: WARNING: at fs/buffer.c:1224 __brelse+0x3a/0x40() (Tainted: G W -- ------------ )
kernel: Hardware name: RHEV Hypervisor
kernel: VFS: brelse: Trying to free free buffer
This patch changes gfs2_meta_indirect_buffer so it only sets
the buffer_head pointer in cases where it isn't released.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Firstly by applying the following with coccinelle's spatch:
@@ expression SB; @@
-SB->s_flags & MS_RDONLY
+sb_rdonly(SB)
to effect the conversion to sb_rdonly(sb), then by applying:
@@ expression A, SB; @@
(
-(!sb_rdonly(SB)) && A
+!sb_rdonly(SB) && A
|
-A != (sb_rdonly(SB))
+A != sb_rdonly(SB)
|
-A == (sb_rdonly(SB))
+A == sb_rdonly(SB)
|
-!(sb_rdonly(SB))
+!sb_rdonly(SB)
|
-A && (sb_rdonly(SB))
+A && sb_rdonly(SB)
|
-A || (sb_rdonly(SB))
+A || sb_rdonly(SB)
|
-(sb_rdonly(SB)) != A
+sb_rdonly(SB) != A
|
-(sb_rdonly(SB)) == A
+sb_rdonly(SB) == A
|
-(sb_rdonly(SB)) && A
+sb_rdonly(SB) && A
|
-(sb_rdonly(SB)) || A
+sb_rdonly(SB) || A
)
@@ expression A, B, SB; @@
(
-(sb_rdonly(SB)) ? 1 : 0
+sb_rdonly(SB)
|
-(sb_rdonly(SB)) ? A : B
+sb_rdonly(SB) ? A : B
)
to remove left over excess bracketage and finally by applying:
@@ expression A, SB; @@
(
-(A & MS_RDONLY) != sb_rdonly(SB)
+(bool)(A & MS_RDONLY) != sb_rdonly(SB)
|
-(A & MS_RDONLY) == sb_rdonly(SB)
+(bool)(A & MS_RDONLY) == sb_rdonly(SB)
)
to make comparisons against the result of sb_rdonly() (which is a bool)
work correctly.
Signed-off-by: David Howells <dhowells@redhat.com>
Pull ->s_options removal from Al Viro:
"Preparations for fsmount/fsopen stuff (coming next cycle). Everything
gets moved to explicit ->show_options(), killing ->s_options off +
some cosmetic bits around fs/namespace.c and friends. Basically, the
stuff needed to work with fsmount series with minimum of conflicts
with other work.
It's not strictly required for this merge window, but it would reduce
the PITA during the coming cycle, so it would be nice to have those
bits and pieces out of the way"
* 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
isofs: Fix isofs_show_options()
VFS: Kill off s_options and helpers
orangefs: Implement show_options
9p: Implement show_options
isofs: Implement show_options
afs: Implement show_options
affs: Implement show_options
befs: Implement show_options
spufs: Implement show_options
bpf: Implement show_options
ramfs: Implement show_options
pstore: Implement show_options
omfs: Implement show_options
hugetlbfs: Implement show_options
VFS: Don't use save/replace_mount_options if not using generic_show_options
VFS: Provide empty name qstr
VFS: Make get_filesystem() return the affected filesystem
VFS: Clean up whitespace in fs/namespace.c and fs/super.c
Provide a function to create a NUL-terminated string from unterminated data
-----BEGIN PGP SIGNATURE-----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=3Z93
-----END PGP SIGNATURE-----
Merge tag 'for-linus-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull Writeback error handling updates from Jeff Layton:
"This pile represents the bulk of the writeback error handling fixes
that I have for this cycle. Some of the earlier patches in this pile
may look trivial but they are prerequisites for later patches in the
series.
The aim of this set is to improve how we track and report writeback
errors to userland. Most applications that care about data integrity
will periodically call fsync/fdatasync/msync to ensure that their
writes have made it to the backing store.
For a very long time, we have tracked writeback errors using two flags
in the address_space: AS_EIO and AS_ENOSPC. Those flags are set when a
writeback error occurs (via mapping_set_error) and are cleared as a
side-effect of filemap_check_errors (as you noted yesterday). This
model really sucks for userland.
Only the first task to call fsync (or msync or fdatasync) will see the
error. Any subsequent task calling fsync on a file will get back 0
(unless another writeback error occurs in the interim). If I have
several tasks writing to a file and calling fsync to ensure that their
writes got stored, then I need to have them coordinate with one
another. That's difficult enough, but in a world of containerized
setups that coordination may even not be possible.
But wait...it gets worse!
The calls to filemap_check_errors can be buried pretty far down in the
call stack, and there are internal callers of filemap_write_and_wait
and the like that also end up clearing those errors. Many of those
callers ignore the error return from that function or return it to
userland at nonsensical times (e.g. truncate() or stat()). If I get
back -EIO on a truncate, there is no reason to think that it was
because some previous writeback failed, and a subsequent fsync() will
(incorrectly) return 0.
This pile aims to do three things:
1) ensure that when a writeback error occurs that that error will be
reported to userland on a subsequent fsync/fdatasync/msync call,
regardless of what internal callers are doing
2) report writeback errors on all file descriptions that were open at
the time that the error occurred. This is a user-visible change,
but I think most applications are written to assume this behavior
anyway. Those that aren't are unlikely to be hurt by it.
3) document what filesystems should do when there is a writeback
error. Today, there is very little consistency between them, and a
lot of cargo-cult copying. We need to make it very clear what
filesystems should do in this situation.
To achieve this, the set adds a new data type (errseq_t) and then
builds new writeback error tracking infrastructure around that. Once
all of that is in place, we change the filesystems to use the new
infrastructure for reporting wb errors to userland.
Note that this is just the initial foray into cleaning up this mess.
There is a lot of work remaining here:
1) convert the rest of the filesystems in a similar fashion. Once the
initial set is in, then I think most other fs' will be fairly
simple to convert. Hopefully most of those can in via individual
filesystem trees.
2) convert internal waiters on writeback to use errseq_t for
detecting errors instead of relying on the AS_* flags. I have some
draft patches for this for ext4, but they are not quite ready for
prime time yet.
This was a discussion topic this year at LSF/MM too. If you're
interested in the gory details, LWN has some good articles about this:
https://lwn.net/Articles/718734/https://lwn.net/Articles/724307/"
* tag 'for-linus-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
btrfs: minimal conversion to errseq_t writeback error reporting on fsync
xfs: minimal conversion to errseq_t writeback error reporting
ext4: use errseq_t based error handling for reporting data writeback errors
fs: convert __generic_file_fsync to use errseq_t based reporting
block: convert to errseq_t based writeback error tracking
dax: set errors in mapping when writeback fails
Documentation: flesh out the section in vfs.txt on storing and reporting writeback errors
mm: set both AS_EIO/AS_ENOSPC and errseq_t in mapping_set_error
fs: new infrastructure for writeback error handling and reporting
lib: add errseq_t type and infrastructure for handling it
mm: don't TestClearPageError in __filemap_fdatawait_range
mm: clear AS_EIO/AS_ENOSPC when writeback initiation fails
jbd2: don't clear and reset errors after waiting on writeback
buffer: set errors in mapping at the time that the error occurs
fs: check for writeback errors after syncing out buffers in generic_file_fsync
buffer: use mapping_set_error instead of setting the flag
mm: fix mapping_set_error call in me_pagecache_dirty
Before commit 88ffbf3e03 "GFS2: Use resizable hash table for glocks",
glocks were freed via call_rcu to allow reading the glock hashtable
locklessly using rcu. This was then changed to free glocks immediately,
which made reading the glock hashtable unsafe. Bring back the original
code for freeing glocks via call_rcu.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Cc: stable@vger.kernel.org # 4.3+
I noticed on xfs that I could still sometimes get back an error on fsync
on a fd that was opened after the error condition had been cleared.
The problem is that the buffer code sets the write_io_error flag and
then later checks that flag to set the error in the mapping. That flag
perisists for quite a while however. If the file is later opened with
O_TRUNC, the buffers will then be invalidated and the mapping's error
set such that a subsequent fsync will return error. I think this is
incorrect, as there was no writeback between the open and fsync.
Add a new mark_buffer_write_io_error operation that sets the flag and
the error in the mapping at the same time. Replace all calls to
set_buffer_write_io_error with mark_buffer_write_io_error, and remove
the places that check this flag in order to set the error in the
mapping.
This sets the error in the mapping earlier, at the time that it's first
detected.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Provide an empty name (ie. "") qstr for general use.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
1. Andreas Gruenbacher has four patches related to cleaning up the GFS2
inode evict process. This is about half of his patches designed to
fix a long-standing GFS2 hang related to the inode shrinker.
(Shrinker calls gfs2 evict, evict calls DLM, DLM requires memory
and blocks on the shrinker.) These 4 patches have been well tested.
His second set of patches are still being tested, so I plan to hold
them until the next merge window, after we have more weeks of testing.
The first patch eliminates the flush_delayed_work, which can block.
2. Andreas's second patch protects setting of gl_object for rgrps with
a spin_lock to prevent proven races.
3. His third patch introduces a centralized mechanism for queueing glock
work with better reference counting, to prevent more races.
4. His fourth patch retains a reference to inode glocks when an error
occurs while creating an inode. This keeps the subsequent evict from
needing to reacquire the glock, which might call into DLM and block
in low memory conditions.
5. Arvind Yadav has a patch to add const to attribute_group structures.
6. I have a patch to detect directory entry inconsistencies and withdraw
the file system if any are found. Better that than silent corruption.
7. I have a patch to remove a vestigial variable from glock structures,
saving some slab space.
8. I have another patch to remove a vestigial variable from the GFS2
in-core superblock structure.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZXOIfAAoJENeLYdPf93o7RVcH/jLEK3hmZOd94pDTYg3Damuo
KI3xjyutDgQT83uwg8p5UBPwRYCDnyiOLwOWGBJJvjPEI1S4syrXq/FzOmxmX6cV
nE28ARL/OXCoFEXBMUVHvHL3nK+zEUr8rO6Xz51B1ifVq7GV8iVK+ZgxzRhx0PWP
f+0SVHiQtU0HKyxR5y9p43oygtHZaGbjy4WL0YbmFZM59y5q9A8rBHFACn2JyPBm
/zXN6gF/Orao+BDXLT6OM3vNXZcOQ7FUPWwctguHsAO/bLzWiISyfJxLWJsHvSdW
tzFTN1DByjXvqAhs4HTSuh9JfBDAyxcXkmczXJyATBkCTEJv42Iev+ILmre+wwQ=
=YTwn
-----END PGP SIGNATURE-----
Merge tag 'gfs2-4.13.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull GFS2 updates from Bob Peterson:
"We've got eight GFS2 patches for this merge window:
- Andreas Gruenbacher has four patches related to cleaning up the
GFS2 inode evict process. This is about half of his patches
designed to fix a long-standing GFS2 hang related to the inode
shrinker: Shrinker calls gfs2 evict, evict calls DLM, DLM requires
memory and blocks on the shrinker.
These four patches have been well tested. His second set of patches
are still being tested, so I plan to hold them until the next merge
window, after we have more weeks of testing. The first patch
eliminates the flush_delayed_work, which can block.
- Andreas's second patch protects setting of gl_object for rgrps with
a spin_lock to prevent proven races.
- His third patch introduces a centralized mechanism for queueing
glock work with better reference counting, to prevent more races.
-His fourth patch retains a reference to inode glocks when an error
occurs while creating an inode. This keeps the subsequent evict
from needing to reacquire the glock, which might call into DLM and
block in low memory conditions.
- Arvind Yadav has a patch to add const to attribute_group
structures.
- I have a patch to detect directory entry inconsistencies and
withdraw the file system if any are found. Better that than silent
corruption.
- I have a patch to remove a vestigial variable from glock
structures, saving some slab space.
- I have another patch to remove a vestigial variable from the GFS2
in-core superblock structure"
* tag 'gfs2-4.13.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
GFS2: constify attribute_group structures.
gfs2: gfs2_create_inode: Keep glock across iput
gfs2: Clean up glock work enqueuing
gfs2: Protect gl->gl_object by spin lock
gfs2: Get rid of flush_delayed_work in gfs2_evict_inode
GFS2: Eliminate vestigial sd_log_flush_wrapped
GFS2: Remove gl_list from glock structure
GFS2: Withdraw when directory entry inconsistencies are detected
