In case the bootconfig is created on one kind of endian machine, and then
read on the other kind of endian kernel, the size and checksum will be
incorrect. Instead, have both the size and checksum always be little
endian and have the tool and the kernel convert it from little endian to
or from the host endian.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCX8brThQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qiBMAQDe1vsp/SyHO9H5pnsepdmk4fERn0bC
Q0qtCoYp1xUKOQEAjnOJKdCE1O6n24u+b+3jw3BHswQLyUKOFaPcIM7jSgM=
=Z6kA
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.10-rc6-bootconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull bootconfig fixes from Steven Rostedt:
"Have bootconfig size and checksum be little endian
In case the bootconfig is created on one kind of endian machine, and
then read on the other kind of endian kernel, the size and checksum
will be incorrect. Instead, have both the size and checksum always be
little endian and have the tool and the kernel convert it from little
endian to or from the host endian"
* tag 'trace-v5.10-rc6-bootconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
docs: bootconfig: Add the endianness of fields
tools/bootconfig: Store size and checksum in footer as le32
bootconfig: Load size and checksum in the footer as le32
The timestamp fields should be copied to new skb too in
A-050385 workaround for later TX timestamping handling.
Fixes: 3c68b8fffb ("dpaa_eth: FMan erratum A050385 workaround")
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Camelia Groza <camelia.groza@nxp.com>
Link: https://lore.kernel.org/r/20201201075258.1875-1-yangbo.lu@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzkaller managed to crash the kernel using an NBMA ip6gre interface. I
could reproduce it creating an NBMA ip6gre interface and forwarding
traffic to it:
skbuff: skb_under_panic: text:ffffffff8250e927 len:148 put:44 head:ffff8c03c7a33
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:109!
Call Trace:
skb_push+0x10/0x10
ip6gre_header+0x47/0x1b0
neigh_connected_output+0xae/0xf0
ip6gre tunnel provides its own header_ops->create, and sets it
conditionally when initializing the tunnel in NBMA mode. When
header_ops->create is used, dev->hard_header_len should reflect the
length of the header created. Otherwise, when not used,
dev->needed_headroom should be used.
Fixes: eb95f52fc7 ("net: ipv6_gre: Fix GRO to work on IPv6 over GRE tap")
Cc: Maria Pasechnik <mariap@mellanox.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Link: https://lore.kernel.org/r/20201130161911.464106-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The NO_160 flag specifies if the device doesn't have 160 MHz support,
but we errorneously assumed the opposite. If the flag was set, we
were considering that 160 MHz was supported, but it's actually the
opposite. Fix it by inverting the bits, i.e. NO_160 is 0x1 and 160
is 0x0.
Fixes: d6f2134a38 ("iwlwifi: add mac/rf types and 160MHz to the device tables")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20201202143859.375bec857ccb.I83884286b688965293e9810381808039bd7eedae@changeid
With commit 58c644ba51 ("sched/idle: Fix arch_cpu_idle() vs
tracing") common code calls arch_cpu_idle() with a lockdep state that
tells irqs are on.
This doesn't work very well for s390: psw_idle() will enable interrupts
to wait for an interrupt. As soon as an interrupt occurs the interrupt
handler will verify if the old context was psw_idle(). If that is the
case the interrupt enablement bits in the old program status word will
be cleared.
A subsequent test in both the external as well as the io interrupt
handler checks if in the old context interrupts were enabled. Due to
the above patching of the old program status word it is assumed the
old context had interrupts disabled, and therefore a call to
TRACE_IRQS_OFF (aka trace_hardirqs_off_caller) is skipped. Which in
turn makes lockdep incorrectly "think" that interrupts are enabled
within the interrupt handler.
Fix this by unconditionally calling TRACE_IRQS_OFF when entering
interrupt handlers. Also call unconditionally TRACE_IRQS_ON when
leaving interrupts handlers.
This leaves the special psw_idle() case, which now returns with
interrupts disabled, but has an "irqs on" lockdep state. So callers of
psw_idle() must adjust the state on their own, if required. This is
currently only __udelay_disabled().
Fixes: 58c644ba51 ("sched/idle: Fix arch_cpu_idle() vs tracing")
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The directed MSIs are delivered to CPUs whose address is
written to the MSI message address. The current code assumes
that a CPU logical number (as it is seen by the kernel)
is also the CPU address.
The above assumption is not correct, as the CPU address
is rather the value returned by STAP instruction. That
value does not necessarily match the kernel logical CPU
number.
Fixes: e979ce7bce ("s390/pci: provide support for CPU directed interrupts")
Cc: <stable@vger.kernel.org> # v5.2+
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
During cci_isr() errors read from register fields belonging to
i2c master1 are currently assigned to the status field belonging to
i2c master0. This patch corrects this error, and always assigns
master1 errors to the status field of master1.
Fixes: e517526195 ("i2c: Add Qualcomm CCI I2C driver")
Reported-by: Loic Poulain <loic.poulain@linaro.org>
Suggested-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
This can be hit by an HPT guest running on an HPT host and bring down
the host, so it's quite important to fix.
Fixes: 7290f3b3d3 ("powerpc/64s/powernv: machine check dump SLB contents")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201128070728.825934-2-npiggin@gmail.com
The copy_to_user() function returns the number of bytes remaining to be
copied but this should return -EFAULT to the user.
Fixes: 1b48dc03e5 ("vhost: vdpa: report iova range")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/X8c32z5EtDsMyyIL@mwanda
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
drivers/vdpa/mlx5/ uses vhost_iotlb*() interfaces, so select
VHOST_IOTLB to make them be built.
However, if VHOST_IOTLB is the only VHOST symbol that is
set/enabled, the object file still won't be built because
drivers/Makefile won't descend into drivers/vhost/ to build it,
so make drivers/Makefile build the needed binary whenever
VHOST_IOTLB is set, like it does for VHOST_RING.
Fixes these build errors:
ERROR: modpost: "vhost_iotlb_itree_next" [drivers/vdpa/mlx5/mlx5_vdpa.ko] undefined!
ERROR: modpost: "vhost_iotlb_itree_first" [drivers/vdpa/mlx5/mlx5_vdpa.ko] undefined!
Fixes: 29064bfdab ("vdpa/mlx5: Add support library for mlx5 VDPA implementation")
Fixes: aff90770e5 ("vdpa/mlx5: Fix dependency on MLX5_CORE")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Eli Cohen <eli@mellanox.com>
Cc: Parav Pandit <parav@mellanox.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Cc: Saeed Mahameed <saeedm@nvidia.com>
Cc: Leon Romanovsky <leonro@nvidia.com>
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20201128213905.27409-1-rdunlap@infradead.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
When adding support for propagating ECT(1) marking in IP headers it seems I
suffered from endianness-confusion in the checksum update calculation: In
fact the ECN field is in the *lower* bits of the first 16-bit word of the
IP header when calculating in network byte order. This means that the
addition performed to update the checksum field was wrong; let's fix that.
Fixes: b723748750 ("tunnel: Propagate ECT(1) when decapsulating as recommended by RFC6040")
Reported-by: Jonathan Morton <chromatix99@gmail.com>
Tested-by: Pete Heist <pete@heistp.net>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20201130183705.17540-1-toke@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=D0md
-----END PGP SIGNATURE-----
Merge tag '5.10-rc6-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Two smb3 fixes for stable"
* tag '5.10-rc6-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix potential use-after-free in cifs_echo_request()
cifs: allow syscalls to be restarted in __smb_send_rqst()
- Use correct timestamp variable for ring buffer write stamp update
- Fix up before stamp and write stamp when crossing ring buffer sub
buffers
- Keep a zero delta in ring buffer in slow path if cmpxchg fails
- Fix trace_printk static buffer for archs that care
- Fix ftrace record accounting for ftrace ops with trampolines
- Fix DYNAMIC_FTRACE_WITH_DIRECT_CALLS dependency
- Remove WARN_ON in hwlat tracer that triggers on something that is OK
- Make "my_tramp" trampoline in ftrace direct sample code global
- Fixes in the bootconfig tool for better alignment management
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCX8ZzghQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qg0JAQCII1bDQyF3APLlNFRqfHf3bTo7Zl5z
WaUd1Cd7JkY+WAD/eF1dWjN0JRtfU+oRlk6UZ4oNmp8WMJvQ7oV26ub2egE=
=lts8
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Use correct timestamp variable for ring buffer write stamp update
- Fix up before stamp and write stamp when crossing ring buffer sub
buffers
- Keep a zero delta in ring buffer in slow path if cmpxchg fails
- Fix trace_printk static buffer for archs that care
- Fix ftrace record accounting for ftrace ops with trampolines
- Fix DYNAMIC_FTRACE_WITH_DIRECT_CALLS dependency
- Remove WARN_ON in hwlat tracer that triggers on something that is OK
- Make "my_tramp" trampoline in ftrace direct sample code global
- Fixes in the bootconfig tool for better alignment management
* tag 'trace-v5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ring-buffer: Always check to put back before stamp when crossing pages
ftrace: Fix DYNAMIC_FTRACE_WITH_DIRECT_CALLS dependency
ftrace: Fix updating FTRACE_FL_TRAMP
tracing: Fix alignment of static buffer
tracing: Remove WARN_ON in start_thread()
samples/ftrace: Mark my_tramp[12]? global
ring-buffer: Set the right timestamp in the slow path of __rb_reserve_next()
ring-buffer: Update write stamp with the correct ts
docs: bootconfig: Update file format on initrd image
tools/bootconfig: Align the bootconfig applied initrd image size to 4
tools/bootconfig: Fix to check the write failure correctly
tools/bootconfig: Fix errno reference after printf()
In commit 682cd3cf94
("tipc: confgiure and apply UDP bearer MTU on running links"), we
introduced a function to change UDP bearer MTU and applied this new value
across existing per-link. However, we did not apply this new MTU value at
node level. This lead to packet dropped at link level if its size is
greater than new MTU value.
To fix this issue, we also apply this new MTU value for node level.
Fixes: 682cd3cf94 ("tipc: confgiure and apply UDP bearer MTU on running links")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Link: https://lore.kernel.org/r/20201130025544.3602-1-hoang.h.le@dektech.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Building on arch/s390/ results in this build error:
cc1: some warnings being treated as errors
../drivers/md/dm-writecache.c: In function 'persistent_memory_claim':
../drivers/md/dm-writecache.c:323:1: error: no return statement in function returning non-void [-Werror=return-type]
Fix this by replacing the BUG() with an -EOPNOTSUPP return.
Fixes: 48debafe4f ("dm: add writecache target")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The BUG_ON(in_interrupt()) in dm_table_event() is a historic leftover from
a rework of the dm table code which changed the calling context.
Issuing a BUG for a wrong calling context is frowned upon and
in_interrupt() is deprecated and only covering parts of the wrong
contexts. The sanity check for the context is covered by
CONFIG_DEBUG_ATOMIC_SLEEP and other debug facilities already.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The dm_get_live_table() function makes RCU read lock so
dm_put_live_table() must be called even if dm_table map is not found.
Fixes: e76239a374 ("block: add a report_zones method")
Cc: stable@vger.kernel.org
Signed-off-by: Sergei Shtepa <sergei.shtepa@veeam.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
This reverts commit 43aeaa2957.
Since commit 0bddd227f3 ("Documentation: update for gcc 4.9 requirement")
the minimum supported version of GCC is gcc-4.9. It's now safe to remove
this code.
Link: https://github.com/ClangBuiltLinux/linux/issues/427
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The default splice operations got removed recently, add it back to 9p
with iter_file_splice_write like many other filesystems do.
Link: http://lkml.kernel.org/r/1606837496-21717-1-git-send-email-asmadeus@codewreck.org
Fixes: 36e2c7421f ("fs: don't allow splice read/write without explicit ops")
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
A couple of minor fixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl+/8moPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpgTIH/0jXnA2xTDvth1JGiL8fzdnBVFI4mIbRg2c6
vXkLgSGnOHgeXsnN/yEpPSREpjjQEJ73UhmVpF27YxgEoV10CliD8reXXLgYeG1t
Kgx9O/9LT8HHaqcrKid78rccjKqoZbqI5xgeEAMc1Y2H2uLudz/8nAwFUt46v6Gm
FTI7W+UfuCigudpfW5gXAU/hbSa3ieY1yaSk5DwPM1V/MEu7lMbhhjwcEASyxgLV
IBK1fkZiMx2RdJLnV+DYQ/ZfT7eSModbuTcl3f+vlObLvtuqa/fbde8JxkhJJ9xd
lgrlBPpqC/7ns+BbFCzwS6jXJcsGMntK9aM6svtN5QotHs7S0kI=
=IOVt
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull vhost fixes from Michael Tsirkin:
"A couple of minor fixes"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost-vdpa: fix page pinning leakage in error path (rework)
vringh: fix vringh_iov_push_*() documentation
vhost scsi: fix lun reset completion handling
The CNIC kconfig symbol selects UIO and UIO depends on MMU.
Since 'select' does not follow dependency chains, add the same MMU
dependency to CNIC.
Quietens this kconfig warning:
WARNING: unmet direct dependencies detected for UIO
Depends on [n]: MMU [=n]
Selected by [m]:
- CNIC [=m] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_BROADCOM [=y] && PCI [=y] && (IPV6 [=m] || IPV6 [=m]=n)
Fixes: adfc5217e9 ("broadcom: Move the Broadcom drivers")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Rasesh Mody <rmody@marvell.com>
Cc: GR-Linux-NIC-Dev@marvell.com
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20201129070843.3859-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Thomas Falcon says:
====================
ibmvnic: Bug fixes for queue descriptor processing
This series resolves a few issues in the ibmvnic driver's
RX buffer and TX completion processing. The first patch
includes memory barriers to synchronize queue descriptor
reads. The second patch fixes a memory leak that could
occur if the device returns a TX completion with an error
code in the descriptor, in which case the respective socket
buffer and other relevant data structures may not be freed
or updated properly.
v3: Correct length of Fixes tags, requested by Jakub Kicinski
v2: Provide more detailed comments explaining specifically what
reads are being ordered, suggested by Michael Ellerman
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
TX completions received with an error return code are not
being processed properly. When an error code is seen, do not
proceed to the next completion before cleaning up the existing
entry's data structures.
Fixes: 032c5e8284 ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ensure that received Subordinate Command-Response Queue (SCRQ)
entries are properly read in order by the driver. These queues
are used in the ibmvnic device to process RX buffer and TX completion
descriptors. dma_rmb barriers have been added after checking for a
pending descriptor to ensure the correct descriptor entry is checked
and after reading the SCRQ descriptor to ensure the entire
descriptor is read before processing.
Fixes: 032c5e8284 ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 22ada802ed ("block: use lcm_not_zero() when stacking
chunk_sectors") broke chunk_sectors limit stacking. chunk_sectors must
reflect the most limited of all devices in the IO stack.
Otherwise malformed IO may result. E.g.: prior to this fix,
->chunk_sectors = lcm_not_zero(8, 128) would result in
blk_max_size_offset() splitting IO at 128 sectors rather than the
required more restrictive 8 sectors.
And since commit 07d098e6bb ("block: allow 'chunk_sectors' to be
non-power-of-2") care must be taken to properly stack chunk_sectors to
be compatible with the possibility that a non-power-of-2 chunk_sectors
may be stacked. This is why gcd() is used instead of reverting back
to using min_not_zero().
Fixes: 22ada802ed ("block: use lcm_not_zero() when stacking chunk_sectors")
Fixes: 07d098e6bb ("block: allow 'chunk_sectors' to be non-power-of-2")
Reported-by: John Dorminy <jdorminy@redhat.com>
Reported-by: Bruce Johnston <bjohnsto@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: John Dorminy <jdorminy@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After commit 74d905d2d3 devices requiring the workaround for edge
triggered interrupts stopped working.
The hardware needs the quirk to be used before even proceeding to
check if the quirk is needed because mxt_acquire_irq() is called
before mxt_check_retrigen() is called and at this point pending IRQs
need to be checked, and if the workaround is not active, all
interrupts will be lost from this point.
Solve this by switching the calls around.
Reported-by: Andre Müller <andre.muller@web.de>
Tested-by: Andre Müller <andre.muller@web.de>
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes: 74d905d2d3 ("Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201201123026.1416743-1-linus.walleij@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Because dfl.c uses the 'devm_ioremap', 'devm_iounmap',
'devm_ioremap_resource', and 'devm_platform_ioremap_resource'
functions, it should depend on HAS_IOMEM.
This fixes make allyesconfig under UML (ARCH=um), which doesn't provide
HAS_IOMEM.
[mdf@kernel.org: Removed "drivers: " in commit message]
Fixes: 89eb35e810 ("fpga: dfl: map feature mmio resources in their own feature drivers")
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20201122001549.107023-2-mdf@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The v9fs file operations were missing the splice_read operations, which
breaks sendfile() of files on such a filesystem. I discovered this while
trying to load an eBPF program using iproute2 inside a 'virtme' environment
which uses 9pfs for the virtual file system. iproute2 relies on sendfile()
with an AF_ALG socket to hash files, which was erroring out in the virtual
environment.
Since generic_file_splice_read() seems to just implement splice_read in
terms of the read_iter operation, I simply added the generic implementation
to the file operations, which fixed the error I was seeing. A quick grep
indicates that this is what most other file systems do as well.
Link: http://lkml.kernel.org/r/20201201135409.55510-1-toke@redhat.com
Fixes: 36e2c7421f ("fs: don't allow splice read/write without explicit ops")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
When the AMD QoS feature CDP (code and data prioritization) is enabled
or disabled, the CDP bit in MSR 0000_0C81 is written on one of the CPUs
in an L3 domain (core complex). That is not correct - the CDP bit needs
to be updated on all the logical CPUs in the domain.
This was not spelled out clearly in the spec earlier. The specification
has been updated and the updated document, "AMD64 Technology Platform
Quality of Service Extensions Publication # 56375 Revision: 1.02 Issue
Date: October 2020" is available now. Refer the section: Code and Data
Prioritization.
Fix the issue by adding a new flag arch_has_per_cpu_cfg in rdt_cache
data structure.
The documentation can be obtained at:
https://developer.amd.com/wp-content/resources/56375.pdf
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537
[ bp: Massage commit message. ]
Fixes: 4d05bf71f1 ("x86/resctrl: Introduce AMD QOS feature")
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/160675180380.15628.3309402017215002347.stgit@bmoger-ubuntu
ld.lld 10.0.1 spews a bunch of various warnings about .rela sections,
along with a few others. Newer versions of ld.lld do not have these
warnings. As a result, do not add '--orphan-handling=warn' to
LDFLAGS_vmlinux if ld.lld's version is not new enough.
Link: https://github.com/ClangBuiltLinux/linux/issues/1187
Link: https://github.com/ClangBuiltLinux/linux/issues/1193
Reported-by: Arvind Sankar <nivedita@alum.mit.edu>
Reported-by: kernelci.org bot <bot@kernelci.org>
Reported-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently, '--orphan-handling=warn' is spread out across four different
architectures in their respective Makefiles, which makes it a little
unruly to deal with in case it needs to be disabled for a specific
linker version (in this case, ld.lld 10.0.1).
To make it easier to control this, hoist this warning into Kconfig and
the main Makefile so that disabling it is simpler, as the warning will
only be enabled in a couple places (main Makefile and a couple of
compressed boot folders that blow away LDFLAGS_vmlinx) and making it
conditional is easier due to Kconfig syntax. One small additional
benefit of this is saving a call to ld-option on incremental builds
because we will have already evaluated it for CONFIG_LD_ORPHAN_WARN.
To keep the list of supported architectures the same, introduce
CONFIG_ARCH_WANT_LD_ORPHAN_WARN, which an architecture can select to
gain this automatically after all of the sections are specified and size
asserted. A special thanks to Kees Cook for the help text on this
config.
Link: https://github.com/ClangBuiltLinux/linux/issues/1187
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit 062cfab706 ("KVM: PPC: Book3S HV: XIVE: Make VP block size
configurable") updated kvmppc_xive_vcpu_id_valid() in a way that
allows userspace to trigger an assertion in skiboot and crash the host:
[ 696.186248988,3] XIVE[ IC 08 ] eq_blk != vp_blk (0 vs. 1) for target 0x4300008c/0
[ 696.186314757,0] Assert fail: hw/xive.c:2370:0
[ 696.186342458,0] Aborting!
xive-kvCPU 0043 Backtrace:
S: 0000000031e2b8f0 R: 0000000030013840 .backtrace+0x48
S: 0000000031e2b990 R: 000000003001b2d0 ._abort+0x4c
S: 0000000031e2ba10 R: 000000003001b34c .assert_fail+0x34
S: 0000000031e2ba90 R: 0000000030058984 .xive_eq_for_target.part.20+0xb0
S: 0000000031e2bb40 R: 0000000030059fdc .xive_setup_silent_gather+0x2c
S: 0000000031e2bc20 R: 000000003005a334 .opal_xive_set_vp_info+0x124
S: 0000000031e2bd20 R: 00000000300051a4 opal_entry+0x134
--- OPAL call token: 0x8a caller R1: 0xc000001f28563850 ---
XIVE maintains the interrupt context state of non-dispatched vCPUs in
an internal VP structure. We allocate a bunch of those on startup to
accommodate all possible vCPUs. Each VP has an id, that we derive from
the vCPU id for efficiency:
static inline u32 kvmppc_xive_vp(struct kvmppc_xive *xive, u32 server)
{
return xive->vp_base + kvmppc_pack_vcpu_id(xive->kvm, server);
}
The KVM XIVE device used to allocate KVM_MAX_VCPUS VPs. This was
limitting the number of concurrent VMs because the VP space is
limited on the HW. Since most of the time, VMs run with a lot less
vCPUs, commit 062cfab706 ("KVM: PPC: Book3S HV: XIVE: Make VP
block size configurable") gave the possibility for userspace to
tune the size of the VP block through the KVM_DEV_XIVE_NR_SERVERS
attribute.
The check in kvmppc_pack_vcpu_id() was changed from
cpu < KVM_MAX_VCPUS * xive->kvm->arch.emul_smt_mode
to
cpu < xive->nr_servers * xive->kvm->arch.emul_smt_mode
The previous check was based on the fact that the VP block had
KVM_MAX_VCPUS entries and that kvmppc_pack_vcpu_id() guarantees
that packed vCPU ids are below KVM_MAX_VCPUS. We've changed the
size of the VP block, but kvmppc_pack_vcpu_id() has nothing to
do with it and it certainly doesn't ensure that the packed vCPU
ids are below xive->nr_servers. kvmppc_xive_vcpu_id_valid() might
thus return true when the VM was configured with a non-standard
VSMT mode, even if the packed vCPU id is higher than what we
expect. We end up using an unallocated VP id, which confuses
OPAL. The assert in OPAL is probably abusive and should be
converted to a regular error that the kernel can handle, but
we shouldn't really use broken VP ids in the first place.
Fix kvmppc_xive_vcpu_id_valid() so that it checks the packed
vCPU id is below xive->nr_servers, which is explicitly what we
want.
Fixes: 062cfab706 ("KVM: PPC: Book3S HV: XIVE: Make VP block size configurable")
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/160673876747.695514.1809676603724514920.stgit@bahia.lan
This is a partial revert of commit 2bb70f0a4b ("USB: serial:
option: support dynamic Quectel USB compositions")
The Quectel BG96 is different from most other modern Quectel modems,
having serial functions with 3 endpoints using ff/ff/ff and ff/fe/ff
class/subclass/protocol. Including it in the change to accommodate
dynamic function mapping was incorrect.
Revert to interface number matching for the BG96, assuming static
layout of the RMNET function on interface 4. This restores support
for the serial functions on interfaces 2 and 3.
Full lsusb output for the BG96:
Bus 002 Device 003: ID 2c7c:0296
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x2c7c
idProduct 0x0296
bcdDevice 0.00
iManufacturer 3 Qualcomm, Incorporated
iProduct 2 Qualcomm CDMA Technologies MSM
iSerial 4 d1098243
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 145
bNumInterfaces 5
bConfigurationValue 1
iConfiguration 1 Qualcomm Configuration
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 254
bInterfaceProtocol 255
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 4
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x88 EP 8 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x05 EP 5 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Cc: Sebastian Sjoholm <sebastian.sjoholm@gmail.com>
Fixes: 2bb70f0a4b ("USB: serial: option: support dynamic Quectel USB compositions")
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Currently the IOCInit request message timeout is set to 10s. This is not
sufficient in some scenarios such as during HBA FW downgrade operations.
Increase the IOCInit request timeout to 30s.
Link: https://lore.kernel.org/r/20201130082733.26120-1-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit c1a6c5ac42 ("scsi: mpt3sas: For NVME device, issue a protocol
level reset") modified the ioctl path 'timeout' variable type to u8 from
unsigned long, limiting the maximum timeout value that the driver can
support to 255 seconds.
If the management application is requesting a higher value the resulting
timeout will be zero. The operation times out immediately and the ioctl
request fails.
Change datatype back to unsigned long.
Link: https://lore.kernel.org/r/20201125094838.4340-1-suganath-prabu.subramani@broadcom.com
Fixes: c1a6c5ac42 ("scsi: mpt3sas: For NVME device, issue a protocol level reset")
Cc: <stable@vger.kernel.org> #v4.18+
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Check that the packet is of the expected size at least, don't copy data
past the packet.
Link: https://lore.kernel.org/r/20201118145348.109879-1-parri.andrea@gmail.com
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Reported-by: Saruhan Karademir <skarade@microsoft.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a description about the endianness of the size and the checksum
fields. Those must be stored as le32 instead of u32. This will allow
us to apply bootconfig to the cross build initrd without caring
the endianness.
Link: https://lkml.kernel.org/r/160583936246.547349.10964204130590955409.stgit@devnote2
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Store the size and the checksum fields in the footer as le32
instead of u32. This will allow us to apply bootconfig to the
cross build initrd without caring the endianness.
Link: https://lkml.kernel.org/r/160583935332.547349.5897811300636587426.stgit@devnote2
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Load the size and the checksum fields in the footer as le32
instead of u32. This will allow us to apply bootconfig to the
cross build initrd without caring the endianness.
Link: https://lkml.kernel.org/r/160583934457.547349.10504070298990791074.stgit@devnote2
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The current ring buffer logic checks to see if the updating of the event
buffer was interrupted, and if it is, it will try to fix up the before stamp
with the write stamp to make them equal again. This logic is flawed, because
if it is not interrupted, the two are guaranteed to be different, as the
current event just updated the before stamp before allocation. This
guarantees that the next event (this one or another interrupting one) will
think it interrupted the time updates of a previous event and inject an
absolute time stamp to compensate.
The correct logic is to always update the timestamps when traversing to a
new sub buffer.
Cc: stable@vger.kernel.org
Fixes: a389d86f7f ("ring-buffer: Have nested events still record running time stamp")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Return -ENOMEM from the error handling case instead of 0.
Link: https://lore.kernel.org/r/20201127030206.104616-1-jingxiangfeng@huawei.com
Fixes: 436ad94133 ("scsi: storvsc: Allow only one remove lun work item to be issued per lun")
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEK3kIWJt9yTYMP3ehqclaivrt76kFAl/E208THG1rbEBwZW5n
dXRyb25peC5kZQAKCRCpyVqK+u3vqRpRB/0ce//dqIwDGRJDi0IlVOlYMNIpW6GO
YrH1QoqWr1deEBHn+QW8FZO/7M935w3vvFh41jn07mX1lQHfwZD5d/2u2PZfOMjq
b2NJ2p/do863QAxtDoRQY6JVcD+Uxu8LHulqhJr9Zt5VnQiZj6LGjcnIdORhryYF
zxg/zO/kpFBShN/svqe/kpxUNJSiCOOVae/f7RHMbW/dzhqWXudpKfJcejT4Z1rH
tBJaMGi2KX3lh41qujiordONU6S9XW0xVHh+Iz3LmiPLFtsp104xOqgqs6o0+9pE
4rvnzD52XeJmoqE0VS3FVfpePceHHYsiUbnYmWf9KK7h5hMM6A8soRsA
=1TKG
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-5.10-20201130' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2020-11-30
The first patch is by me an target the tcan4x5x bindings for the m_can driver.
It fixes the error path in the tcan4x5x_can_probe() function.
The next two patches are by Jeroen Hofstee and makes the lost of arbitration
error counters of sja1000 and the sun4i drivers consistent with the other
drivers.
Zhang Qilong contributes two patch that clean up the error path in the c_can
and kvaser_pciefd drivers.
* tag 'linux-can-fixes-for-5.10-20201130' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: kvaser_pciefd: kvaser_pciefd_open(): fix error handling
can: c_can: c_can_power_up(): fix error handling
can: sun4i_can: sun4i_can_err(): don't count arbitration lose as an error
can: sja1000: sja1000_err(): don't count arbitration lose as an error
can: m_can: tcan4x5x_can_probe(): fix error path: remove erroneous clk_disable_unprepare()
====================
Link: https://lore.kernel.org/r/20201130125307.218258-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
