mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-21 03:33:59 +08:00
5b4ca44477
527403 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Nikolay Aleksandrov
|
9aa6638216 |
bridge: multicast: add a comment to br_port_state_selection about blocking state
Add a comment to explain why we're not disabling port's multicast when it goes in blocking state. Since there's a check in the timer's function which bypasses the timer if the port's in blocking/disabled state, the timer will simply expire and stop without sending more queries. Suggested-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Mauro Carvalho Chehab
|
faebbd8f13 |
[media] lmedm04: fix the range for relative measurements
Relative measurements are typically between 0 and 0xffff. However, for some tuners (TUNER_S7395 and TUNER_S0194), the range were from 0 to 0xff00, with means that 100% is never archived. Also, TUNER_RS2000 uses a more complex math. So, create a macro that does the conversion using bit operations and use it for all conversions. The code is also easier to read with is a bonus. While here, remove a bogus comment. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> |
||
|
Mauro Carvalho Chehab
|
5ae65db547 |
[media] lmedm04: use u32 instead of u64 for relative stats
Cleanup this sparse warning: drivers/media/usb/dvb-usb-v2/lmedm04.c:302 lme2510_update_stats() warn: should '((255 - st->signal_sn - 161) * 3) << 8' be a 64 bit type? Both c_tmp and s_tmp actually stores a u16 stat. Using a u64 data there is a waste, specially on u32 archs, as 64 ints there are more expensive. So, change the types to u32 and do the typecast only when storing the result. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> |
||
|
Mauro Carvalho Chehab
|
7fd6bd9df1 |
[media] omap3isp: remove unused var
drivers/media/platform/omap3isp/isppreview.c:932:6: warning: variable ‘features’ set but not used [-Wunused-but-set-variable] Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> |
||
|
Mauro Carvalho Chehab
|
816de50d35 |
[media] saa7134: fix page size on some archs
On some archs, like tile, the PAGE_SIZE is not 4K. In the case of tile arch, it can be either 16KB or 64KB. Due to that, a warning is produced: drivers/media/pci/saa7134/saa7134.h:678:43: warning: large integer implicitly truncated to unsigned type [-Woverflow] This is actually an error, as it will write trach to the DMA size registers. The logic at saa7134-ts already does the right thing: saa_writeb(SAA7134_TS_DMA0, ((dev->ts.nr_packets-1)&0xff)); saa_writeb(SAA7134_TS_DMA1, (((dev->ts.nr_packets-1)>>8)&0xff)); /* TSNOPIT=0, TSCOLAP=0 */ saa_writeb(SAA7134_TS_DMA2, ((((dev->ts.nr_packets-1)>>16)&0x3f) | 0x00)); So, fix the driver to take larger page sizes into account. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> |
||
|
Mauro Carvalho Chehab
|
846793b3f9 |
[media] use CONFIG_PM_SLEEP for suspend/resume
Using CONFIG_PM_SLEEP suppress the warnings when the driver is compiled without PM sleep functions: drivers/media/rc/st_rc.c:338:12: warning: ‘st_rc_suspend’ defined but not used [-Wunused-function] drivers/media/rc/st_rc.c:359:12: warning: ‘st_rc_resume’ defined but not used [-Wunused-function] Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> |
||
David S. Miller
|
3a07bd6fea |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts: drivers/net/ethernet/mellanox/mlx4/main.c net/packet/af_packet.c Both conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Phil Sutter
|
204621551b |
net: inet_diag: export IPV6_V6ONLY sockopt
For AF_INET6 sockets, the value of struct ipv6_pinfo.ipv6only is exported to userspace. It indicates whether a socket bound to in6addr_any listens on IPv4 as well as IPv6. Since the socket is natively IPv6, it is not listed by e.g. 'ss -l -4'. This patch is accompanied by an appropriate one for iproute2 to enable the additional information in 'ss -e'. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Alexey Brodkin
|
f1590670ce |
stmmac: troubleshoot unexpected bits in des0 & des1
Current implementation of descriptor init procedure only takes
care about setting/clearing ownership flag in "des0"/"des1"
fields while it is perfectly possible to get unexpected bits
set because of the following factors:
[1] On driver probe underlying memory allocated with
dma_alloc_coherent() might not be zeroed and so
it will be filled with garbage.
[2] During driver operation some bits could be set by SD/MMC
controller (for example error flags etc).
And unexpected and/or randomly set flags in "des0"/"des1"
fields may lead to unpredictable behavior of GMAC DMA block.
This change addresses both items above with:
[1] Use of dma_zalloc_coherent() instead of simple
dma_alloc_coherent() to make sure allocated memory is
zeroed. That shouldn't affect performance because
this allocation only happens once on driver probe.
[2] Do explicit zeroing of both "des0" and "des1" fields
of all buffer descriptors during initialization of
DMA transfer.
And while at it fixed identation of dma_free_coherent()
counterpart as well.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: arc-linux-dev@synopsys.com
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Cc: David Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||
|
David S. Miller
|
f389a40ec3 |
Merge branch 'ipv4-nexthop-link-status'
Andy Gospodarek says:
====================
changes to make ipv4 routing table aware of next-hop link status
This series adds the ability to have the Linux kernel track whether or
not a particular route should be used based on the link-status of the
interface associated with the next-hop.
Before this patch any link-failure on an interface that was serving as a
gateway for some systems could result in those systems being isolated
from the rest of the network as the stack would continue to attempt to
send frames out of an interface that is actually linked-down. When the
kernel is responsible for all forwarding, it should also be responsible
for taking action when the traffic can no longer be forwarded -- there
is no real need to outsource link-monitoring to userspace anymore.
This feature is only enabled with the new per-interface or ipv4 global
sysctls called 'ignore_routes_with_linkdown'.
net.ipv4.conf.all.ignore_routes_with_linkdown = 0
net.ipv4.conf.default.ignore_routes_with_linkdown = 0
net.ipv4.conf.lo.ignore_routes_with_linkdown = 0
...
When the above sysctls are set, the kernel will not only report to
userspace that the link is down, but it will also report to userspace
that a route is dead. This will signal to userspace that the route will
not be selected.
With the new sysctls set, the following behavior can be observed
(interface p8p1 is link-down):
default via 10.0.5.2 dev p9p1
10.0.5.0/24 dev p9p1 proto kernel scope link src 10.0.5.15
70.0.0.0/24 dev p7p1 proto kernel scope link src 70.0.0.1
80.0.0.0/24 dev p8p1 proto kernel scope link src 80.0.0.1 dead linkdown
90.0.0.0/24 via 80.0.0.2 dev p8p1 metric 1 dead linkdown
90.0.0.0/24 via 70.0.0.2 dev p7p1 metric 2
90.0.0.1 via 70.0.0.2 dev p7p1 src 70.0.0.1
cache
local 80.0.0.1 dev lo src 80.0.0.1
cache <local>
80.0.0.2 via 10.0.5.2 dev p9p1 src 10.0.5.15
cache
While the route does remain in the table (so it can be modified if
needed rather than being wiped away as it would be if IFF_UP was
cleared), the proper next-hop is chosen automatically when the link is
down. Now interface p8p1 is linked-up:
default via 10.0.5.2 dev p9p1
10.0.5.0/24 dev p9p1 proto kernel scope link src 10.0.5.15
70.0.0.0/24 dev p7p1 proto kernel scope link src 70.0.0.1
80.0.0.0/24 dev p8p1 proto kernel scope link src 80.0.0.1
90.0.0.0/24 via 80.0.0.2 dev p8p1 metric 1
90.0.0.0/24 via 70.0.0.2 dev p7p1 metric 2
192.168.56.0/24 dev p2p1 proto kernel scope link src 192.168.56.2
90.0.0.1 via 80.0.0.2 dev p8p1 src 80.0.0.1
cache
local 80.0.0.1 dev lo src 80.0.0.1
cache <local>
80.0.0.2 dev p8p1 src 80.0.0.1
cache
and the output changes to what one would expect.
If the global or interface sysctl is not set, the following output would
be expected when p8p1 is down:
default via 10.0.5.2 dev p9p1
10.0.5.0/24 dev p9p1 proto kernel scope link src 10.0.5.15
70.0.0.0/24 dev p7p1 proto kernel scope link src 70.0.0.1
80.0.0.0/24 dev p8p1 proto kernel scope link src 80.0.0.1 linkdown
90.0.0.0/24 via 80.0.0.2 dev p8p1 metric 1 linkdown
90.0.0.0/24 via 70.0.0.2 dev p7p1 metric 2
If the dead flag does not appear there should be no expectation that the
kernel would skip using this route due to link being down.
v2: Split kernel changes into 2 patches: first to add linkdown flag and
second to add new sysctl settings. Also took suggestion from Alex to
simplify code by only checking sysctl during fib lookup and suggestion
from Scott to add a per-interface sysctl. Added iproute2 patch to
recognize and print linkdown flag.
v3: Code cleanups along with reverse-path checks suggested by Alex and
small fixes related to problems found when multipath was disabled.
v4: Drop binary sysctls
v5: Whitespace and variable declaration fixups suggested by Dave
v6: Style changes noticed by Dave and checkpath suggestions.
v7: Last checkpatch fixup.
Though there were some that preferred not to have a configuration option
and to make this behavior the default when it was discussed in Ottawa
earlier this year since "it was time to do this." I wanted to propose
the config option to preserve the current behavior for those that desire
it. I'll happily remove it if Dave and Linus approve.
An IPv6 implementation is also needed (DECnet too!), but I wanted to
start with the IPv4 implementation to get people comfortable with the
idea before moving forward. If this is accepted the IPv6 implementation
can be posted shortly.
There was also a request for switchdev support for this, but that will
be posted as a followup as switchdev does not currently handle dead
next-hops in a multi-path case and I felt that infra needed to be added
first.
FWIW, we have been running the original version of this series with a
global sysctl and our customers have been happily using a backported
version for IPv4 and IPv6 for >6 months.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||
Andy Gospodarek
|
0eeb075fad |
net: ipv4 sysctl option to ignore routes when nexthop link is down
This feature is only enabled with the new per-interface or ipv4 global
sysctls called 'ignore_routes_with_linkdown'.
net.ipv4.conf.all.ignore_routes_with_linkdown = 0
net.ipv4.conf.default.ignore_routes_with_linkdown = 0
net.ipv4.conf.lo.ignore_routes_with_linkdown = 0
...
When the above sysctls are set, will report to userspace that a route is
dead and will no longer resolve to this nexthop when performing a fib
lookup. This will signal to userspace that the route will not be
selected. The signalling of a RTNH_F_DEAD is only passed to userspace
if the sysctl is enabled and link is down. This was done as without it
the netlink listeners would have no idea whether or not a nexthop would
be selected. The kernel only sets RTNH_F_DEAD internally if the
interface has IFF_UP cleared.
With the new sysctl set, the following behavior can be observed
(interface p8p1 is link-down):
default via 10.0.5.2 dev p9p1
10.0.5.0/24 dev p9p1 proto kernel scope link src 10.0.5.15
70.0.0.0/24 dev p7p1 proto kernel scope link src 70.0.0.1
80.0.0.0/24 dev p8p1 proto kernel scope link src 80.0.0.1 dead linkdown
90.0.0.0/24 via 80.0.0.2 dev p8p1 metric 1 dead linkdown
90.0.0.0/24 via 70.0.0.2 dev p7p1 metric 2
90.0.0.1 via 70.0.0.2 dev p7p1 src 70.0.0.1
cache
local 80.0.0.1 dev lo src 80.0.0.1
cache <local>
80.0.0.2 via 10.0.5.2 dev p9p1 src 10.0.5.15
cache
While the route does remain in the table (so it can be modified if
needed rather than being wiped away as it would be if IFF_UP was
cleared), the proper next-hop is chosen automatically when the link is
down. Now interface p8p1 is linked-up:
default via 10.0.5.2 dev p9p1
10.0.5.0/24 dev p9p1 proto kernel scope link src 10.0.5.15
70.0.0.0/24 dev p7p1 proto kernel scope link src 70.0.0.1
80.0.0.0/24 dev p8p1 proto kernel scope link src 80.0.0.1
90.0.0.0/24 via 80.0.0.2 dev p8p1 metric 1
90.0.0.0/24 via 70.0.0.2 dev p7p1 metric 2
192.168.56.0/24 dev p2p1 proto kernel scope link src 192.168.56.2
90.0.0.1 via 80.0.0.2 dev p8p1 src 80.0.0.1
cache
local 80.0.0.1 dev lo src 80.0.0.1
cache <local>
80.0.0.2 dev p8p1 src 80.0.0.1
cache
and the output changes to what one would expect.
If the sysctl is not set, the following output would be expected when
p8p1 is down:
default via 10.0.5.2 dev p9p1
10.0.5.0/24 dev p9p1 proto kernel scope link src 10.0.5.15
70.0.0.0/24 dev p7p1 proto kernel scope link src 70.0.0.1
80.0.0.0/24 dev p8p1 proto kernel scope link src 80.0.0.1 linkdown
90.0.0.0/24 via 80.0.0.2 dev p8p1 metric 1 linkdown
90.0.0.0/24 via 70.0.0.2 dev p7p1 metric 2
Since the dead flag does not appear, there should be no expectation that
the kernel would skip using this route due to link being down.
v2: Split kernel changes into 2 patches, this actually makes a
behavioral change if the sysctl is set. Also took suggestion from Alex
to simplify code by only checking sysctl during fib lookup and
suggestion from Scott to add a per-interface sysctl.
v3: Code clean-ups to make it more readable and efficient as well as a
reverse path check fix.
v4: Drop binary sysctl
v5: Whitespace fixups from Dave
v6: Style changes from Dave and checkpatch suggestions
v7: One more checkpatch fixup
Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: Dinesh Dutt <ddutt@cumulusnetworks.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||
|
Andy Gospodarek
|
8a3d03166f |
net: track link-status of ipv4 nexthops
Add a fib flag called RTNH_F_LINKDOWN to any ipv4 nexthops that are reachable via an interface where carrier is off. No action is taken, but additional flags are passed to userspace to indicate carrier status. This also includes a cleanup to fib_disable_ip to more clearly indicate what event made the function call to replace the more cryptic force option previously used. v2: Split out kernel functionality into 2 patches, this patch simply sets and clears new nexthop flag RTNH_F_LINKDOWN. v3: Cleanups suggested by Alex as well as a bug noticed in fib_sync_down_dev and fib_sync_up when multipath was not enabled. v5: Whitespace and variable declaration fixups suggested by Dave. v6: Style fixups noticed by Dave; ran checkpatch to be sure I got them all. Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: Dinesh Dutt <ddutt@cumulusnetworks.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Vivien Didelot
|
5c8079d049 |
net: switchdev: ignore unsupported bridge flags
switchdev_port_bridge_getlink() queries SWITCHDEV_ATTR_PORT_BRIDGE_FLAGS
attributes, but a driver doesn't need to implement this in order to get
bridge link information.
So error out only on errors different than -EOPNOTSUPP.
(This is a follow-up patch for 7d4f8d8.)
Fixes:
|
||
Pavel Fedin
|
bd049a90e5 |
net: Cavium: Fix MAC address setting in shutdown state
This bug pops up with NetworkManager on Fedora 21. NetworkManager tends to stop the interface (nicvf_stop() is called) before changing settings. In stopped state MAC cannot be sent to a PF. However, when the interface is restarted (nicvf_open() is called), we ping the PF using NIC_MBOX_MSG_READY message, and the PF replies back with old MAC address, overriding what we had after MAC setting from userspace. As a result, we cannot set MAC address using NetworkManager. This patch introduces special tracking of MAC change in stopped state so that the correct new MAC address is sent to a PF when interface is reopen. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Stephen Rothwell
|
8beeef8de4 |
drivers: net: xgene: fix for ACPI support without ACPI
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Julian Anastasov
|
34b99df4e6 |
ip: report the original address of ICMP messages
ICMP messages can trigger ICMP and local errors. In this case
serr->port is 0 and starting from Linux 4.0 we do not return
the original target address to the error queue readers.
Add function to define which errors provide addr_offset.
With this fix my ping command is not silent anymore.
Fixes:
|
||
|
David S. Miller
|
12d4ae9d99 |
Merge branch 'mlx-next'
Or Gerlitz says: ==================== Mellanox NIC drivers update, June 23 2015 This series has two fixes from Eran to his recent SRIOV counters work in mlx4 and few more updates from Saeed and Achiad to the mlx5 Ethernet code. All fixes here relate to net-next code, so no need for -stable. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Saeed Mahameed
|
99611ba127 |
net/mlx5e: Prefetch skb data on RX
Prefetch the 1st cache line used by the buffer pointed by the skb linear data. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Achiad Shochat
|
a1f5a1a87a |
net/mlx5e: Pop cq outside mlx5e_get_cqe
Separate between mlx5e_get_cqe() and mlx5_cqwq_pop(), this helps for better code readability and better CQ buffer management. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Achiad Shochat
|
e33910548a |
net/mlx5e: Remove mlx5e_cq.sqrq back-pointer
Use container_of() instead. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Achiad Shochat
|
8ca56ce39d |
net/mlx5e: Remove extra spaces
Coding Style fix, remove extra spaces. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Achiad Shochat
|
059ba072eb |
net/mlx5e: Avoid TX CQE generation if more xmit packets expected
In order to save PCI BW consumed by TX CQEs and to reduce the amount of
CPU cache misses caused by TX CQE reading, we request TX CQE generation
only when skb->xmit_more=0.
As a consequence of the above, a single TX CQE may now indicate the
transmission completion of multiple TX SKBs.
This also handles a problem introduced in commit b1b8105ebf41 "net/mlx5e:
Support NETIF_F_SG" where we didn't ask for NOP completions while the
driver didn't have the proper code to handle this case.
Fixes: b1b8105ebf41 ('net/mlx5e: Support NETIF_F_SG')
Signed-off-by: Achiad Shochat <achiad@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||
|
Achiad Shochat
|
9fc5930625 |
net/mlx5e: Avoid redundant dev_kfree_skb() upon NOP completion
NOP completion SKBs are always NULL. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Achiad Shochat
|
ef583d037d |
net/mlx5e: Remove re-assignment of wq type in mlx5e_enable_rq()
It is already assigned at mlx5e_build_rq_param() Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Saeed Mahameed
|
fb6c6f2529 |
net/mlx5e: Use skb_shinfo(skb)->gso_segs rather than counting them
Instead of counting number of gso fragments, we can use skb_shinfo(skb)->gso_segs. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Saeed Mahameed
|
03289b88e3 |
net/mlx5e: Static mapping of netdev priv resources to/from netdev TX queues
To save per-packet calculations, we use the following static mappings:
1) priv {channel, tc} to netdev txq (used @mlx5e_selec_queue())
2) netdev txq to priv sq (used @mlx5e_xmit())
Thanks to these static mappings, no more need for a separate implementation
of ndo_start_xmit when multiple TCs are configured.
We believe the performance improvement of such separation would be negligible, if any.
The previous way of dynamically calculating the above mappings required
allocating more TX queues than actually used (@alloc_etherdev_mqs()),
which is now no longer needed.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||
Eran Ben Elisha
|
f1a3badb0b |
net/mlx4_en: Use HW counters for rx/tx bytes/packets in PF device
Under SRIOV, the port rx/tx bytes/packets statistics should by read from the HW instead of using the PF netdevice SW accounting. This is needed in order to get the full port statistics and not just the PF own ones Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Eran Ben Elisha
|
9a2abf5a80 |
net/mlx4_en: Fix off-by-four in ethtool
NUM_ALL_STATS was not updated with the new four entries, instead
NUM_FLOW_STATS was updated, fix it. that caused off-by-four for all
counters below pf_*_*.
Fixes:
|
||
Linus Torvalds
|
6eae81a5e2 |
IOMMU Updates for Linux v4.2
This time with bigger changes than usual:
* A new IOMMU driver for the ARM SMMUv3. This IOMMU is pretty
different from SMMUv1 and v2 in that it is configured through
in-memory structures and not through the MMIO register region.
The ARM SMMUv3 also supports IO demand paging for PCI devices
with PRI/PASID capabilities, but this is not implemented in
the driver yet.
* Lots of cleanups and device-tree support for the Exynos IOMMU
driver. This is part of the effort to bring Exynos DRM support
upstream.
* Introduction of default domains into the IOMMU core code. The
rationale behind this is to move functionalily out of the
IOMMU drivers to common code to get to a unified behavior
between different drivers.
The patches here introduce a default domain for iommu-groups
(isolation groups). A device will now always be attached to a
domain, either the default domain or another domain handled by
the device driver. The IOMMU drivers have to be modified to
make use of that feature. So long the AMD IOMMU driver is
converted, with others to follow.
* Patches for the Intel VT-d drvier to fix DMAR faults that
happen when a kdump kernel boots. When the kdump kernel boots
it re-initializes the IOMMU hardware, which destroys all
mappings from the crashed kernel. As this happens before
the endpoint devices are re-initialized, any in-flight DMA
causes a DMAR fault. These faults cause PCI master aborts,
which some devices can't handle properly and go into an
undefined state, so that the device driver in the kdump kernel
fails to initialize them and the dump fails.
This is now fixed by copying over the mapping structures (only
context tables and interrupt remapping tables) from the old
kernel and keep the old mappings in place until the device
driver of the new kernel takes over. This emulates the the
behavior without an IOMMU to the best degree possible.
* A couple of other small fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=Zicw
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
"This time with bigger changes than usual:
- A new IOMMU driver for the ARM SMMUv3.
This IOMMU is pretty different from SMMUv1 and v2 in that it is
configured through in-memory structures and not through the MMIO
register region. The ARM SMMUv3 also supports IO demand paging for
PCI devices with PRI/PASID capabilities, but this is not
implemented in the driver yet.
- Lots of cleanups and device-tree support for the Exynos IOMMU
driver. This is part of the effort to bring Exynos DRM support
upstream.
- Introduction of default domains into the IOMMU core code.
The rationale behind this is to move functionalily out of the IOMMU
drivers to common code to get to a unified behavior between
different drivers. The patches here introduce a default domain for
iommu-groups (isolation groups).
A device will now always be attached to a domain, either the
default domain or another domain handled by the device driver. The
IOMMU drivers have to be modified to make use of that feature. So
long the AMD IOMMU driver is converted, with others to follow.
- Patches for the Intel VT-d drvier to fix DMAR faults that happen
when a kdump kernel boots.
When the kdump kernel boots it re-initializes the IOMMU hardware,
which destroys all mappings from the crashed kernel. As this
happens before the endpoint devices are re-initialized, any
in-flight DMA causes a DMAR fault. These faults cause PCI master
aborts, which some devices can't handle properly and go into an
undefined state, so that the device driver in the kdump kernel
fails to initialize them and the dump fails.
This is now fixed by copying over the mapping structures (only
context tables and interrupt remapping tables) from the old kernel
and keep the old mappings in place until the device driver of the
new kernel takes over. This emulates the the behavior without an
IOMMU to the best degree possible.
- A couple of other small fixes and cleanups"
* tag 'iommu-updates-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (69 commits)
iommu/amd: Handle large pages correctly in free_pagetable
iommu/vt-d: Don't disable IR when it was previously enabled
iommu/vt-d: Make sure copied over IR entries are not reused
iommu/vt-d: Copy IR table from old kernel when in kdump mode
iommu/vt-d: Set IRTA in intel_setup_irq_remapping
iommu/vt-d: Disable IRQ remapping in intel_prepare_irq_remapping
iommu/vt-d: Move QI initializationt to intel_setup_irq_remapping
iommu/vt-d: Move EIM detection to intel_prepare_irq_remapping
iommu/vt-d: Enable Translation only if it was previously disabled
iommu/vt-d: Don't disable translation prior to OS handover
iommu/vt-d: Don't copy translation tables if RTT bit needs to be changed
iommu/vt-d: Don't do early domain assignment if kdump kernel
iommu/vt-d: Allocate si_domain in init_dmars()
iommu/vt-d: Mark copied context entries
iommu/vt-d: Do not re-use domain-ids from the old kernel
iommu/vt-d: Copy translation tables from old kernel
iommu/vt-d: Detect pre enabled translation
iommu/vt-d: Make root entry visible for hardware right after allocation
iommu/vt-d: Init QI before root entry is allocated
iommu/vt-d: Cleanup log messages
...
|
||
|
Linus Torvalds
|
54245ed870 |
MTD fixes for 4.2
JFFS2
* fix a theoretical unbalanced locking issue; the lock handling was a bit
unclean, but AFAICT, it didn't actually lead to real deadlocks
NAND
* brcmnand driver: new driver supporting NAND controller found originally on
Broadcom STB SoCs (BCM7xxx), but now also found on BCM63xxx, iProc (e.g.,
Cygnus, BCM5301x), BCM3xxx, and more
* Begin factoring out BBT code so it can be shared between traditional
(parallel) NAND drivers and upcoming SPI NAND drivers (WIP)
* Add common DT-based init support, so nand_base can pick up some flash
properties automatically, using established common NAND DT properties
* mxc_nand: support 8-bit ECC
* pxa3xx_nand:
- fix build for ARM64
- use a jiffies-based timeout
SPI NOR
* Add a few new IDs
* Clear out some unnecessary entries
* Make sure SECT_4K flags are correct for all (?) entries
Core
* Fix mtd->usecount race conditions (BUG_ON())
* Switch to modern PM ops
Other
* CFI: save code space by de-inlining large functions
* Clean up some partition parser selection code across several drivers
* Various miscellaneous changes, mostly minor
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=JN5N
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20150623' of git://git.infradead.org/linux-mtd
Pull MTD updates from Brian Norris:
"JFFS2:
- fix a theoretical unbalanced locking issue; the lock handling was a
bit unclean, but AFAICT, it didn't actually lead to real deadlocks
NAND:
- brcmnand driver: new driver supporting NAND controller found
originally on Broadcom STB SoCs (BCM7xxx), but now also found on
BCM63xxx, iProc (e.g., Cygnus, BCM5301x), BCM3xxx, and more
- begin factoring out BBT code so it can be shared between
traditional (parallel) NAND drivers and upcoming SPI NAND drivers
(WIP)
- add common DT-based init support, so nand_base can pick up some
flash properties automatically, using established common NAND DT
properties
- mxc_nand: support 8-bit ECC
- pxa3xx_nand:
* fix build for ARM64
* use a jiffies-based timeout
SPI NOR:
- add a few new IDs
- clear out some unnecessary entries
- make sure SECT_4K flags are correct for all (?) entries
Core:
- fix mtd->usecount race conditions (BUG_ON())
- switch to modern PM ops
Other:
- CFI: save code space by de-inlining large functions
- clean up some partition parser selection code across several
drivers
- various miscellaneous changes, mostly minor"
* tag 'for-linus-20150623' of git://git.infradead.org/linux-mtd: (57 commits)
mtd: docg3: Fix kasprintf() usage
mtd: docg3: Don't leak docg3->bbt in error path
mtd: nandsim: Fix kasprintf() usage
mtd: cs553x_nand: Fix kasprintf() usage
mtd: r852: Fix device_create_file() usage
mtd: brcmnand: drop unnecessary initialization
mtd: propagate error codes from add_mtd_device()
mtd: diskonchip: remove two-phase partitioning / registration
mtd: dc21285: use raw spinlock functions for nw_gpio_lock
mtd: chips: fixup dependencies, to prevent build error
mtd: cfi_cmdset_0002: Initialize datum before calling map_word_load_partial
mtd: cfi: deinline large functions
mtd: lantiq-flash: use default partition parsers
mtd: plat_nand: use default partition probe
mtd: nand: correct indentation within conditional
mtd: remove incorrect file name
mtd: blktrans: use better error code for unimplemented ioctl()
mtd: maps: Spelling s/reseved/reserved/
mtd: blktrans: change blktrans_getgeo return value
mtd: mxc_nand: generate nand_ecclayout for 8 bit ECC
...
|
||
|
Linus Torvalds
|
84e9c87e6f |
== Changes to existing drivers ==
- Constify structures; throughout the subsystem
- Move support to DT in; cros_ec
- DT changes and documentation; cros-ec, max77693, max77686, arizona, da9063
- ACPI changes and documentation; mfd-core
- Use different platform specific API in; cros_ec_*, arizona-core
- Remove unused parent field from; cros_ec_i2c
- Add wake-up/reset delay in; cross_ec_spi, arizona-core
- Staticise structures/functions in; cros_ec
- Remove redundant code; arizona-core, max77686
- Bugfix; twl4030-power
- Allow compile test; aat2870, tps65910
- MAINTAINERS adaptions; samsung, syscon
- Resource Management (devm_*); arizona-core
- Refactor Reset code; arizona-core
- Insist on at least one full boot; arizona-core
- Trivial formatting; arizona-core
- Add low-power-sleep; arizona-core
- IRQ ONESHOT changes; twl4030-irq, mc13xxx-core, wm831x-auxadc, htc-i2cpld,
wm8350-core, ab8500-debugfs, ab8500-gpadc, si476x-i2c
== (Re-)moved drivers ==
- Move protocol helpers out to drivers/platform; cros_ec
== New drivers/supported devices ==
- Add support for AXP22x into axp20x
- Add support for OnKey into da9063-core
- Add support for Pinctrl into mt6397-core
- New STMicroelectronics LPC Watchdog driver
- New STMicroelectronics LPC Real-Time Clock driver
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Y02f
-----END PGP SIGNATURE-----
Merge tag 'mfd-for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Changes to existing drivers:
- Constify structures; throughout the subsystem
- Move support to DT in; cros_ec
- DT changes and documentation; cros-ec, max77693, max77686, arizona, da9063
- ACPI changes and documentation; mfd-core
- Use different platform specific API in; cros_ec_*, arizona-core
- Remove unused parent field from; cros_ec_i2c
- Add wake-up/reset delay in; cross_ec_spi, arizona-core
- Staticise structures/functions in; cros_ec
- Remove redundant code; arizona-core, max77686
- Bugfix; twl4030-power
- Allow compile test; aat2870, tps65910
- MAINTAINERS adaptions; samsung, syscon
- Resource Management (devm_*); arizona-core
- Refactor Reset code; arizona-core
- Insist on at least one full boot; arizona-core
- Trivial formatting; arizona-core
- Add low-power-sleep; arizona-core
- IRQ ONESHOT changes; twl4030-irq, mc13xxx-core, wm831x-auxadc, htc-i2cpld,
wm8350-core, ab8500-debugfs, ab8500-gpadc, si476x-i2c
(Re-)moved drivers:
- Move protocol helpers out to drivers/platform; cros_ec
New drivers/supported devices:
- Add support for AXP22x into axp20x
- Add support for OnKey into da9063-core
- Add support for Pinctrl into mt6397-core
- New STMicroelectronics LPC Watchdog driver
- New STMicroelectronics LPC Real-Time Clock driver"
* tag 'mfd-for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (59 commits)
mfd: lpc_ich: Assign subdevice ids automatically
mfd: si476x-i2c: Pass the IRQF_ONESHOT flag
mfd: ab8500-gpadc: Pass the IRQF_ONESHOT flag
mfd: ab8500-debugfs: Pass the IRQF_ONESHOT flag
mfd: wm8350-core: Pass the IRQF_ONESHOT flag
mfd: htc-i2cpld: Pass the IRQF_ONESHOT flag
mfd: wm831x-auxadc: Pass the IRQF_ONESHOT flag
mfd: mc13xxx-core: Pass the IRQF_ONESHOT flag
mfd: twl4030-irq: Pass the IRQF_ONESHOT flag
mfd: mt6397-core: Add GPIO sub-module support
mfd: arizona: Add convience defines for micd_rate/micd_bias_starttime
mfd: dt: Add bindings for DA9063 OnKey
mfd: da9063: Add support for OnKey driver
mfd: arizona: Fix incorrect Makefile conditionals
mfd: arizona: Add stub for wm5102_patch()
mfd: Check ACPI device companion before checking resources
Documentation: Add WM8998/WM1814 device tree bindings
mfd: arizona: Split INx_MODE into two fields
mfd: wm5110: Add delay before releasing reset line
mfd: arizona: Add better support for system suspend
...
|
||
|
Linus Torvalds
|
7fe0bf908d |
regulator: Updates for v4.2
Another fairly quiet release, some new drivers with generic handling for
minor features but nothing that makes a substantial difference outside
of the subsystem or for most boards:
- Support for a bunch of new parameters which are present on enough
regulators to be worth having generic handling for in the framework.
- Fixes for some issues with printing constraints during boot which
should probably have gone in for v4.1 but didn't.
- New drivers for Dialog DA9062, Maxim MAX77621 and Qualcomm SPMI regulators.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJViYM8AAoJECTWi3JdVIfQxBkH/iWXaFGXaH4N42jKbo0RnKWT
JtKCQwVEilVDFjixt9fNDzlEX0ErZ9wuYvYYRkCGZqhwFwhZe2Pg1BGmN/e5o8dk
6OS3ZNiybBuUNHHio+toZyhJsJoSJubP7MZsWBpJ5evWYmnmqGS589LnlsZwJ7Ez
5W5YUU8GmwyUk2dEa+WpnT3jBJqfccuCzET68jtZz+koRIO0l/gpAgwhVoC/iF2J
LYn1r4Cvp0hOcvPJsbTsXUKDIeMk4jfvuYDzBXUyC21fsG2qPlvuYo3nKjhTnMBC
gxQcPzbUbfakRH6R5GFdFx+rhvzSKc4dlula5cOF9n++eVFQ6jwHqBk/XvSKRVc=
=e9Ij
-----END PGP SIGNATURE-----
Merge tag 'regulator-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"Another fairly quiet release, some new drivers with generic handling
for minor features but nothing that makes a substantial difference
outside of the subsystem or for most boards:
- support for a bunch of new parameters which are present on enough
regulators to be worth having generic handling for in the
framework.
- fixes for some issues with printing constraints during boot which
should probably have gone in for v4.1 but didn't.
- new drivers for Dialog DA9062, Maxim MAX77621 and Qualcomm SPMI
regulators"
* tag 'regulator-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (45 commits)
regulator: qcom_spmi: Fix calculating number of voltages
regulator: qcom_spmi: Add missing braces for aligned code
regulator: fix simple_return.cocci warnings
regulator: Add QCOM SPMI regulator driver
regulator: Add docbook for soft start
regulator: Add input current limit support
regulator: Add soft start support
regulator: Add pull down support
regulator: Add system_load constraint
regulator: max8973: Fix up ramp_delay for MAX8973_RAMP_25mV_PER_US case
regulator: core: replace sprintf with scnprintf
regulator: core: fix constraints output buffer
regulator: core: Don't corrupt display when printing uV offsets
regulator: max8973: add support for MAX77621
regulator: max8973: configure ramp delay through callback
regulator: pwm-regulator: Diffientiate between dev (device) and rdev (regulator_dev)
regulator: pwm-regulator: Remove superfluous is_enabled check
regulator: pwm-regulator: Remove unnecessary descriptor attribute from ddata
regulator: core: Don't spew backtraces on duplicate sysfs
regulator: da9063: Fix up irq leak
...
|
||
|
Linus Torvalds
|
5a602e157a |
spi: Updates for v4.2
No framework updates for the SPI API this time around aside from one
small fix, just driver improvments. Some highlights include:
- New driver support for CSR USP, Mikrotik RB4xx and Zynq GQSPI
controllers.
- Modernisation of the OMAP McSPI controller driver, moving it to
current APIs to enable support for a wider range of client drivers.
- DMA support for the bcm2835 controller.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJViTdyAAoJECTWi3JdVIfQxY0H/2dWW+6SIt+To4WHDQDkKluA
QsT2n+t05LMukdWkD+fiaXMJ+4yqY1Dg8oNRUJeGCltRTJWmcjZep44hRpMv3EJd
oswPwKcfBMQ5jP3iwoiZvZiJxhTVBm2xJerOtL8ZyALovmU4BPN1VUpq+t1+yLnF
O53DnuIN29PEm2/VGK1+HlWNRebMEAsG/wlPvkFBT3TyIVwLAoMuYwkRMeK9XVnN
J9sgdsxQwKwKk6Vnh1oZ2uht83PFrMpZIyX2pKYLGRLxJ8ZYBOPUnAdqbWfDXA9t
rexsQdNWjJrcyIRJh1NqRnnIA43q6AgdPsCgg8eaI+1Jx3F2Bp+SpRjwK91KW+I=
=0yyj
-----END PGP SIGNATURE-----
Merge tag 'spi-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"No framework updates for the SPI API this time around aside from one
small fix, just driver improvments. Some highlights include:
- New driver support for CSR USP, Mikrotik RB4xx and Zynq GQSPI
controllers.
- Modernisation of the OMAP McSPI controller driver, moving it to
current APIs to enable support for a wider range of client drivers.
- DMA support for the bcm2835 controller"
* tag 'spi-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (60 commits)
spi: zynq: Remove execute bit
spi: atmel: add support to FIFOs
spi: atmel: update DT bindings documentation
spi: spi-fsl-dspi: Update DT binding documentation
spi: pxa2xx: Constify ACPI device ids
spi: Add support for Zynq Ultrascale+ MPSoC GQSPI controller
spi: zynq: Add DT bindings documentation for Zynq Ultrascale+ MPSoC GQSPI controller
spi: fsl-dspi: Use pinctrl PM helpers
spi: davinci: change the lower limit of pre-scale divider to 1
spi: spi-fsl-dspi: Change the way of increasing spi_message->actual_length
spi: spi-fsl-dspi: Enable TCF interrupt mode support
spi: atmel: add support for the internal chip-select of the spi controller
spi: spi-pxa2xx: remove legacy PXA DMA bits
spi: pxa2xx: Make LPSS SPI general register optional
spi: pxa2xx: Prepare for new Intel LPSS SPI type
spi: pxa2xx: Differentiate Intel LPSS types
spi: restore rx/tx_buf in case of unset CONFIG_HAS_DMA
spi: rspi: Re-do the returning value of qspi_transfer_out_in
spi: rspi: modify the name of "qspi_trigger_transfer_out_int" function
spi: orion: Fix extended baud rates for each Armada SoCs
...
|
||
|
Linus Torvalds
|
e12bdf0d92 |
regmap: Fixes for v4.2
As well as a few fixes and updates for API changes there's two new
features for the API:
- Better support for handling a reset of the underlying hardware,
marking the register map as needing a resync to the device when
we need to do that automatically.
- Support for querying the size and stride of the register map,
allowing higher level frameworks to configure themselves more
readily.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJViTT4AAoJECTWi3JdVIfQkXUH/2M7hKIAZ+OiZYFMW1SNupDv
YQ5h6F/lQAWs06AD3nuKgKLZQOdbTVthdYl05DretT+JMIJIyW3QeOrdiEdVTzcU
zX5tcfg8wWW1/VmtT9YZQ7uhgJZ3+Sbirt2KZdEag2LTqMtItqJFRyjIr5CwvQff
eQSdvUnygmQPktvqYc0S2CN0DsJt5YCRlg+AC624WGdt7VJadWkSLNwR+cELSpRy
F+ok1+bdy7RdqYtt7CrwCiZgvv8yCYgvuHFUkTMg5/qkUj3ps/dnj0DV80m/Dqig
IUccwDscWjiRLKYtS6UM9bGMlADFAdnp/WSzAr6iiEaWVSGfb6h2agKdYO35qHE=
=0JUa
-----END PGP SIGNATURE-----
Merge tag 'regmap-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"As well as a few fixes and updates for API changes there's two new
features for the API:
- Better support for handling a reset of the underlying hardware,
marking the register map as needing a resync to the device when we
need to do that automatically
- Support for querying the size and stride of the register map,
allowing higher level frameworks to configure themselves more
readily"
* tag 'regmap-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Fix possible shift overflow in regmap_field_init()
regmap: Fix regmap_bulk_read in BE mode
regmap: kill off set_irq_flags usage
regmap: irq: Fixed a typo error
regmap: drop unneeded goto
regmap: Introduce regmap_get_reg_stride
regmap: Introduce regmap_get_max_register
regmap: Use regcache_mark_dirty() to indicate power loss or reset
regmap: Add a helper function for regcache sync test
regmap: Constify irq_domain_ops
|
||
|
Linus Torvalds
|
1a13e36a79 |
fbdev changes for 4.2
* ssd1307fb: various fixes and improvements, SSD1305 support * Use architecture agnostic functions instead of MTRR functions in various fbdev drivers * TI DRA7xx SoC display support (arch/arm/ side) * OMAPDSS componentization to fix probing order issues * OMAPDSS scaling fixes * msm_fb: remove obsoleted driver -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJViP8kAAoJEPo9qoy8lh71RqQP/3YnFrHQj1G/EDw4EvaUrcJb MiEbc6Q1/OkG+KWls8kNFi0Mm5PeXlOYgjYukr9mFS0C/BxceU/Aqg/+1TqGSMe4 kZArCTKWa3ZyU2TUwmPPpeUPeUTUBBXrVBdfqtfNzs2wQKunwQX9MlKQnDHnCZJD 4kUsK12iW5C+EW0fDWDEg9GwEe/cJ6jBLEYWPTg/1ePtrKKGp8O6kEEtOTVwaKT+ EdStaPOTUKvCgdcfVQhIgKcym2t4/BeFEt2moxDU9vwClatGbXmTDIru2iCrGgIU VFGIjOetVwRe0h+8zpYTATxvJPxmjWYL7HhJ0SbFNMDlZephdJxZGJbgszxHZCW/ ap1fnxWvW2LZ48JsZSmHTnWK0CoX3WGs+Q+TWqMHy1ID8jkOc2SkHeB3IzCyOG/V NwUNvDyooyNV0J8ywbBXIMVmlg7YE3AgNROFlApqm2rF5fhtTO3HER71ALBZckEH FXRN4tsyLQXbzmuHcQgY3ENxPZgPYM0usSdAVWSU/vIXrhdnWGA7nWE7bRg508Hd aHhpw5HrH8L+4nNwDvd4Dai9Ye8DimWvIPdb1wH8mZ2c81sLxCTkePqkAc7AXo54 UOkXSWjUBu1i8w/BZqXT9U/dU+aCDQ9beNDFLrZQLwrwtHASyyJY75Hi3DtcZyBQ HUAWB45Gu2f+k7PCGsRQ =Ix8O -----END PGP SIGNATURE----- Merge tag 'fbdev-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev updates from Tomi Valkeinen: - ssd1307fb: various fixes and improvements, SSD1305 support - use architecture agnostic functions instead of MTRR functions in various fbdev drivers - TI DRA7xx SoC display support (arch/arm/ side) - OMAPDSS componentization to fix probing order issues - OMAPDSS scaling fixes - msm_fb: remove obsoleted driver * tag 'fbdev-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (77 commits) msm: msm_fb: Remove dead code OMAPDSS: HDMI: wait for framedone when stopping video OMAPDSS: HDMI4: fix error handling OMAPDSS: DISPC: scaler debug print OMAPDSS: DISPC: do only y decimation on OMAP3 OMAPDSS: DISPC: check if scaling setup failed OMAPDSS: DISPC: fix 64 bit issue in 5-tap OMAPDSS: DISPC: fix row_inc for OMAP3 OMAPDSS: DISPC: add check for scaling limits OMAPDSS: DISPC: fix check_horiz_timing_omap3 args OMAPDSS: DISPC: fix predecimation for YUV modes OMAPDSS: DISPC: work-around for errata i631 OMAPDSS: simplify submodule reg/unreg code OMAPDSS: componentize omapdss OMAPDSS: reorder uninit calls OMAPDSS: remove uses of __init/__exit OMAPDSS: fix dss_init_ports error handling OMAPDSS: refactor dss probe function OMAPDSS: move 'dss_initialized' to dss driver fbdev: propagate result of fb_videomode_from_videomode() ... |
||
|
Linus Torvalds
|
36a1624d88 |
power supply and reset changes for the v4.2 series
* New charger drivers: BQ24257, BQ25890, AXP288, RT9455 * MAX17042 battery: add health & temperature support * BQ2415x charger: add ACPI support * misc. fixes and cleanups -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABCgAGBQJViI++AAoJENju1/PIO/qasPYP/0YMZdNNEUA/z1Uv8litaGbe gCzLRKuevt/996eVQcGJwsla/7AZwNgpUJya28mpiRqp+RbsTB4bkiGCkD2aO2Jw p34h9tIugU5H8+iL1+vl/ztpjwwm/bxEQHNpHK/YwqQLP7QazI6/yyRAUzYu0bGk RUndaStY/UZ/9KtSfGYF54kpxCXVQS0aHPMXXKQREr3Hg/VMlBoKQeAvJ7jTTjST 7s9ZncO70jeY1NrSSdRY+anbuUNYqt0ndbaHhlpayGxnWL+PGdd2mNKq/ycGmBld 8PwnDs+6fLv24PGYnkwbTryCbdvU9ZYUuNVb4XNTY+8x8CSPNuM8yYhqkmmq1dfI zXy1U9TCkLtKSk+7rxKWZc0WuWn2D9UJvr1zAoK9TMafdLi3YIMbm1TemKpLX/HJ chORnioPNgBiLmSzJ+nizWfWU5BQ5MhJamzhER0dRG9u8/2YJzCyNfd2miGrvAdL LecLcWopEDa+cAg5HM3usKcv0GsBJIes/jmtSMv2URWk8FHcXsDMsnl+D/77/LmV PM+HNJ/cNi7WGMgMO6lb1gULaRdAb6tZS865p2Abx5NkNjjRQw9A8EIwP30SPWh7 aPhU6jxDdmhpez4nJeyHdjcQqnlE+Cxz9vwj8IMgneTjSl4guUY1HcgmAHJtrKGC WNB/r32UzJ5AZ0VxBB15 =192M -----END PGP SIGNATURE----- Merge tag 'for-4.2' of git://git.infradead.org/battery-2.6 Pull power supply and reset updates from Sebastian Reichel: - new charger drivers: BQ24257, BQ25890, AXP288, RT9455 - MAX17042 battery: add health & temperature support - BQ2415x charger: add ACPI support - misc fixes and cleanups * tag 'for-4.2' of git://git.infradead.org/battery-2.6: (32 commits) power_supply: Correct kerneldoc copy paste errors wm831x_power: Fix off-by-one at free_irq() power_supply: rt9455_charger: Fix error reported by static analysis tool power_supply: bq24257: use flags argument of devm_gpiod_get power_supply: bq25890: use flags argument of devm_gpiod_get sbs-battery: add option to always register battery power: Add devm_power_supply_get_by_phandle() helper function power_supply: max17042: Add OF support for setting thresholds power_supply: sysfs: Bring back write to writeable properties power_supply: rt9455_charger: Check if CONFIG_USB_PHY is enabled power: reset: gpio-restart: increase priority slightly power_supply: bq25890: make chip_id int power_supply: Add support for Richtek RT9455 battery charger Documentation: devicetree: Add Richtek RT9455 bindings of: Add vendor prefix for Richtek Technology Corporation power_supply: 88pm860x_charger: Do not call free_irq() twice power: bq24190_charger: Change first_time flag reset condition power: axp288_charger: axp288 charger driver power: max17042_battery: add HEALTH and TEMP_* properties support power_supply: Add support for TI BQ25890 charger chip ... |
||
|
Linus Torvalds
|
5262f25f09 |
HSI changes for the v4.2 series
* misc. fixes -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABCgAGBQJViKusAAoJENju1/PIO/qauE8QAKIaXtsWQDhje1tXZO1swNNe R4k2rQvnqROJZqLY4Yg4iF5heM+ZTKBc9IjoW48fakF1+m4Z1vo08mDaamHyaJHi AKbfH5IYBaQ65aTTTtYRtrZOjOS8dn5ePHuPt85YOzlPszknxPDKZ1bVBs1Ukyo/ z0VsmD0unNe5x1WBFet3wgrY3wXBrdbKgKhhowgnRRqG1/c9r11dj5rgnc3K2LSt Y3gPC7ubmlFp58L/m1a4LCJwCNNx9Ub1S62rN8uOgSNpgPPJg8z4LY6PqmNhL8MZ GWBa56TgfCL056jyYlPOsBGgHkTuiwMiJRkelCpK8cVXCh/+DbUM5KjXBkWFFO7I UgaoxAJpIG32OZ/COyy8SpNYiq0YEemCwDQq0Tpd3ME9Dy+kjuK2GDsdc+DFhkHK L5zkWmqZqH/uiriuU7n1EPI0fE9pyP8+xXffDHhgaPaQekKJO521kQpUhP8Px3pi yM8TbLksrkQa7ZrT/etmL8kBoXiqh06ySNOPBuSGwj/EMgLlidAsJfoG73vLONDe O52H8X4TOhW6iG6DXfqLWnwQ6Ve7yMbnaeW6Ih5LPRzLr0H848P1N425QW4hVahz Lux1fMYmijOgXU4ZEz5tMhnBQUe9xLpIhLcVFTHAKqwS7c+mChpjVyDgWBQSakC/ e7P4G2Ei+v7ovMnLbppN =CTGh -----END PGP SIGNATURE----- Merge tag 'hsi-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi Pull HSI updates from Sebastian Reichel: "Misc fixes" * tag 'hsi-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi: HSI: nokia-modem: use flags argument of devm_gpiod_get to set direction HSI: nokia-modem: Reduce missing driver message to debug level HSI: cmt_speech: fix timestamp interface |
||
|
Linus Torvalds
|
acd53127c4 |
SCSI misc on 20150622
This is the usual grab bag of driver updates (lpfc, hpsa, megaraid_sas, cxgbi, be2iscsi) plus an assortment of minor updates. There are also one new driver: the Cisco snic; the advansys driver has been rewritten to get rid of the warning about converting it to the DMA API, the tape statistics patch got in and finally, there's a resuffle of SCSI header files to separate more cleanly initiator from target mode (and better share the common definitions). Signed-off-by: James Bottomley <JBottomley@Odin.com> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQEcBAABAgAGBQJViKWdAAoJEDeqqVYsXL0MAr8IAMmlA6HBVjMJJFCEOY9corHj e70MNQa7LUgf+JCdOtzGcvHXTiFFd4IHZAwXUJAnsC4IU2QWEfi1bjUTErlqBIGk LoZlXXpEHnFpmWot3OluOzzcGcxede8rVgPiKWVVdojIngBC2+LL/i2vPCJ84ri9 WCVlk6KBvWZXuU6JuOKAb2FO9HOX7Q61wuKAMast2Qc6RNc2ksgc7VbstsITqzZ9 FVEsjmQ5lqUj+xdxBpiUOdUpc22IJ4VcpBgQ2HrThvg6vf4aq937RJ/g4vi/g0SU Utk0a3bUw1H/WnYAfJVFx83nVEsS/954Z7/ERDg1sjlfLYwQtQnpov0XIbPIbZU= =k9IT -----END PGP SIGNATURE----- Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "This is the usual grab bag of driver updates (lpfc, hpsa, megaraid_sas, cxgbi, be2iscsi) plus an assortment of minor updates. There is also one new driver: the Cisco snic. The advansys driver has been rewritten to get rid of the warning about converting it to the DMA API, the tape statistics patch got in and finally, there's a resuffle of SCSI header files to separate more cleanly initiator from target mode (and better share the common definitions)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (156 commits) snic: driver for Cisco SCSI HBA qla2xxx: Fix indentation qla2xxx: Comment out unreachable code fusion: remove dead MTRR code advansys: fix compilation errors and warnings when CONFIG_PCI is not set mptsas: fix depth param in scsi_track_queue_full megaraid: fix irq setup process regression lpfc: Update version to 10.7.0.0 for upstream patch set. lpfc: Fix to drop PLOGIs from fabric node till LOGO processing completes lpfc: Fix scsi task management error message. lpfc: Fix cq_id masking problem. lpfc: Fix scsi prep dma buf error. lpfc: Add support for using block multi-queue lpfc: Devices are not discovered during takeaway/giveback testing lpfc: Fix vport deletion failure. lpfc: Check for active portpeerbeacon. lpfc: Update driver version for upstream patch set 10.6.0.1. lpfc: Change buffer pool empty message to miscellaneous category lpfc: Fix incorrect log message reported for empty FCF record. lpfc: Fix rport leak. ... |
||
|
Linus Torvalds
|
f9d1b5a31a |
Changes for 4.2
- A large cleanup of how device capabilities are checked for various features - Additional cleanups in the MAD processing - Update to the srp driver - Creation and use of centralized log message helpers - Add const to a number of args to calls and clean up call chain - Add support for extended cq create verb - Add support for timestamps on cq completion - Add support for processing OPA MAD packets -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJVeyzqAAoJELgmozMOVy/di3wP/jml4F9crvQn7UBJjGm/rgcI wzZ2GZTqxQE8dn+W6gQsdKOzy0Ibxx5UYGp9ruInuxAcVh9t1PcylanasaiGMEtY mrGRFjipJ9jYa+yDQDTQi8EFMClZuMSvtRLKjzYITudCXQck37V+F5YlP6VphjX7 JeiM4a+4rD0ukk5PKGvUw51sP1eawKtEdUvnqcOEI2tJgQmzJBP4mXrhVtS/0wSc Pi8TRN5QKi3Drom/tK9QQ/ncoYngi4BKLfszCeU373HJq6qXqsxBYvs3jX6MPzfv Aooj272JxBgCYxkmEfECezDpmi3PbWDJjXj/xCLjfhjISDtHHHVLGVMODZpwUEsL 2wBgwlzdajVopSbSLvsjQNtQw25s7sDWpu+TFKbS0u+W2d0ZOyipM1Xeje+OtDHQ clhwvDhgSfeI/bJ1YdtNLbvINrwsfZD213zD+WH21A/9weAVr3hEfTuSaNFiTiRn 5yywP36TM0wH90KhiWoLrztcHvoE5p7kGuqzv04MRjrMMNHEJK2/IhWvT97Ewngu vWrZl7QRzXYcGspCOp2aJW9Wr2rhGRrv28TF+thpNrIJOB2JM4q4koCKZCcI0s2D E6pY2YQSzvrA/ZSfcWIg4yhugcycIJkOf7ur2N/U43cwGXtaCzPWVnKMApmdnVOO ZEMwD3OZ1OGcCHLhRL8Y =yISf -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma updates from Doug Ledford: - a large cleanup of how device capabilities are checked for various features - additional cleanups in the MAD processing - update to the srp driver - creation and use of centralized log message helpers - add const to a number of args to calls and clean up call chain - add support for extended cq create verb - add support for timestamps on cq completion - add support for processing OPA MAD packets * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (92 commits) IB/mad: Add final OPA MAD processing IB/mad: Add partial Intel OPA MAD support IB/mad: Add partial Intel OPA MAD support IB/core: Add OPA MAD core capability flag IB/mad: Add support for additional MAD info to/from drivers IB/mad: Convert allocations from kmem_cache to kzalloc IB/core: Add ability for drivers to report an alternate MAD size. IB/mad: Support alternate Base Versions when creating MADs IB/mad: Create a generic helper for DR forwarding checks IB/mad: Create a generic helper for DR SMP Recv processing IB/mad: Create a generic helper for DR SMP Send processing IB/mad: Split IB SMI handling from MAD Recv handler IB/mad cleanup: Generalize processing of MAD data IB/mad cleanup: Clean up function params -- find_mad_agent IB/mlx4: Add support for CQ time-stamping IB/mlx4: Add mmap call to map the hardware clock IB/core: Pass hardware specific data in query_device IB/core: Add timestamp_mask and hca_core_clock to query_device IB/core: Extend ib_uverbs_create_cq IB/core: Add CQ creation time-stamping flag ... |
||
|
Linus Torvalds
|
2ad7b44f5d |
Merge branch 'for-linus-clk' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull clkdev updates from Russell King:
"This series addresses some breakage in clkdev caused by a previous
patch set from the clk tree which introduced per-user clk structures.
This basically renamed the existing 'struct clk' to 'struct clk_hw',
and introduced a new 'struct clk'.
This change will break anyone using clk_add_alias() with the common
clk code enabled. Thankfully, the intersection of users of
clk_add_alias() and those using the common clk code is practically
zero, but this is something which should be fixed to keep the code
sane.
The problem is that clk_add_alias() does this:
r = clk_get(...);
l = clkdev_alloc(r, ...);
clk_put(...);
which causes the alias to store a pointer to 'r', which has been
freed.
The original patch set tried to work around this problem incorrectly -
at clk_get() time, it tried to convert the struct clk to a struct
clk_hw, and then creating a new struct clk from that. Clearly, if the
original struct clk has been freed, then we have a use-after-free bug.
We have other places in the tree which do something similar, so this
series also addresses those locations too.
This series addresses this problem by converting clkdev to store and
use the clk_hw pointer. This allows clk_get() to only have to create
it's per-user struct clk from the clk_hw. We can also get to the
desired clk_hw at clk_add_alias() or clk lookup creation time, when
the struct clk is "alive".
We also perform some cleanups of the code:
- replacing looped calls to clkdev_add() with clkdev_add_table()
- replacing open-coded lookup allocation (which should have been
using clkdev_alloc()) and subsequent clkdev_add() with
clkdev_create()
- replacing open-coded clk_add_alias() with clk_add_alias()"
* 'for-linus-clk' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
clk: s2mps11: use clkdev_create()
ASoC: migor: use clkdev_create()
ARM: omap2: use clkdev_add_alias()
ARM: omap2: use clkdev_create()
ARM: orion: use clkdev_create()
ARM: lpc32xx: convert to use clkdev_add_table()
SH: use clkdev_add_table()
clkdev: add clkdev_create() helper
clkdev: const-ify connection id to clk_add_alias()
clkdev: get rid of redundant clk_add_alias() prototype in linux/clk.h
clkdev: drop __init from clkdev_add_table()
clk: update clk API documentation to clarify clk_round_rate()
clkdev: use clk_hw internally
|
||
|
Linus Torvalds
|
43c9fad942 |
Power management and ACPI material for v4.2-rc1
- ACPICA update to upstream revision 20150515 including basic
support for ACPI 6 features: new ACPI tables introduced by
ACPI 6 (STAO, XENV, WPBT, NFIT, IORT), changes related to the
other tables (DTRM, FADT, LPIT, MADT), new predefined names
(_BTH, _CR3, _DSD, _LPI, _MTL, _PRR, _RDI, _RST, _TFP, _TSN),
fixes and cleanups (Bob Moore, Lv Zheng).
- ACPI device power management core code update to follow ACPI 6
which reflects the ACPI device power management implementation
in Windows (Rafael J Wysocki).
- Rework of the backlight interface selection logic to reduce the
number of kernel command line options and improve the handling
of DMI quirks that may be involved in that and to make the
code generally more straightforward (Hans de Goede).
- Fixes for the ACPI Embedded Controller (EC) driver related to
the handling of EC transactions (Lv Zheng).
- Fix for a regression related to the ACPI resources management
and resulting from a recent change of ACPI initialization code
ordering (Rafael J Wysocki).
- Fix for a system initialization regression related to ACPI
introduced during the 3.14 cycle and caused by running the
code that switches the platform over to the ACPI mode too
early in the initialization sequence (Rafael J Wysocki).
- Support for the ACPI _CCA device configuration object related
to DMA cache coherence (Suravee Suthikulpanit).
- ACPI/APEI fixes and cleanups (Jiri Kosina, Borislav Petkov).
- ACPI battery driver cleanups (Luis Henriques, Mathias Krause).
- ACPI processor driver cleanups (Hanjun Guo).
- Cleanups and documentation update related to the ACPI device
properties interface based on _DSD (Rafael J Wysocki).
- ACPI device power management fixes (Rafael J Wysocki).
- Assorted cleanups related to ACPI (Dominik Brodowski. Fabian
Frederick, Lorenzo Pieralisi, Mathias Krause, Rafael J Wysocki).
- Fix for a long-standing issue causing General Protection Faults
to be generated occasionally on return to user space after resume
from ACPI-based suspend-to-RAM on 32-bit x86 (Ingo Molnar).
- Fix to make the suspend core code return -EBUSY consistently in
all cases when system suspend is aborted due to wakeup detection
(Ruchi Kandoi).
- Support for automated device wakeup IRQ handling allowing drivers
to make their PM support more starightforward (Tony Lindgren).
- New tracepoints for suspend-to-idle tracing and rework of the
prepare/complete callbacks tracing in the PM core (Todd E Brandt,
Rafael J Wysocki).
- Wakeup sources framework enhancements (Jin Qian).
- New macro for noirq system PM callbacks (Grygorii Strashko).
- Assorted cleanups related to system suspend (Rafael J Wysocki).
- cpuidle core cleanups to make the code more efficient (Rafael J
Wysocki).
- powernv/pseries cpuidle driver update (Shilpasri G Bhat).
- cpufreq core fixes related to CPU online/offline that should
reduce the overhead of these operations quite a bit, unless the
CPU in question is physically going away (Viresh Kumar, Saravana
Kannan).
- Serialization of cpufreq governor callbacks to avoid race
conditions in some cases (Viresh Kumar).
- intel_pstate driver fixes and cleanups (Doug Smythies, Prarit
Bhargava, Joe Konno).
- cpufreq driver (arm_big_little, cpufreq-dt, qoriq) updates (Sudeep
Holla, Felipe Balbi, Tang Yuantian).
- Assorted cleanups in cpufreq drivers and core (Shailendra Verma,
Fabian Frederick, Wang Long).
- New Device Tree bindings for representing Operating Performance
Points (Viresh Kumar).
- Updates for the common clock operations support code in the PM
core (Rajendra Nayak, Geert Uytterhoeven).
- PM domains core code update (Geert Uytterhoeven).
- Intel Knights Landing support for the RAPL (Running Average Power
Limit) power capping driver (Dasaratharaman Chandramouli).
- Fixes related to the floor frequency setting on Atom SoCs in the
RAPL power capping driver (Ajay Thomas).
- Runtime PM framework documentation update (Ben Dooks).
- cpupower tool fix (Herton R Krzesinski).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=7jTj
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI updates from Rafael Wysocki:
"The rework of backlight interface selection API from Hans de Goede
stands out from the number of commits and the number of affected
places perspective. The cpufreq core fixes from Viresh Kumar are
quite significant too as far as the number of commits goes and because
they should reduce CPU online/offline overhead quite a bit in the
majority of cases.
From the new featues point of view, the ACPICA update (to upstream
revision 20150515) adding support for new ACPI 6 material to ACPICA is
the one that matters the most as some new significant features will be
based on it going forward. Also included is an update of the ACPI
device power management core to follow ACPI 6 (which in turn reflects
the Windows' device PM implementation), a PM core extension to support
wakeup interrupts in a more generic way and support for the ACPI _CCA
device configuration object.
The rest is mostly fixes and cleanups all over and some documentation
updates, including new DT bindings for Operating Performance Points.
There is one fix for a regression introduced in the 4.1 cycle, but it
adds quite a number of lines of code, it wasn't really ready before
Thursday and you were on vacation, so I refrained from pushing it on
the last minute for 4.1.
Specifics:
- ACPICA update to upstream revision 20150515 including basic support
for ACPI 6 features: new ACPI tables introduced by ACPI 6 (STAO,
XENV, WPBT, NFIT, IORT), changes related to the other tables (DTRM,
FADT, LPIT, MADT), new predefined names (_BTH, _CR3, _DSD, _LPI,
_MTL, _PRR, _RDI, _RST, _TFP, _TSN), fixes and cleanups (Bob Moore,
Lv Zheng).
- ACPI device power management core code update to follow ACPI 6
which reflects the ACPI device power management implementation in
Windows (Rafael J Wysocki).
- rework of the backlight interface selection logic to reduce the
number of kernel command line options and improve the handling of
DMI quirks that may be involved in that and to make the code
generally more straightforward (Hans de Goede).
- fixes for the ACPI Embedded Controller (EC) driver related to the
handling of EC transactions (Lv Zheng).
- fix for a regression related to the ACPI resources management and
resulting from a recent change of ACPI initialization code ordering
(Rafael J Wysocki).
- fix for a system initialization regression related to ACPI
introduced during the 3.14 cycle and caused by running the code
that switches the platform over to the ACPI mode too early in the
initialization sequence (Rafael J Wysocki).
- support for the ACPI _CCA device configuration object related to
DMA cache coherence (Suravee Suthikulpanit).
- ACPI/APEI fixes and cleanups (Jiri Kosina, Borislav Petkov).
- ACPI battery driver cleanups (Luis Henriques, Mathias Krause).
- ACPI processor driver cleanups (Hanjun Guo).
- cleanups and documentation update related to the ACPI device
properties interface based on _DSD (Rafael J Wysocki).
- ACPI device power management fixes (Rafael J Wysocki).
- assorted cleanups related to ACPI (Dominik Brodowski, Fabian
Frederick, Lorenzo Pieralisi, Mathias Krause, Rafael J Wysocki).
- fix for a long-standing issue causing General Protection Faults to
be generated occasionally on return to user space after resume from
ACPI-based suspend-to-RAM on 32-bit x86 (Ingo Molnar).
- fix to make the suspend core code return -EBUSY consistently in all
cases when system suspend is aborted due to wakeup detection (Ruchi
Kandoi).
- support for automated device wakeup IRQ handling allowing drivers
to make their PM support more starightforward (Tony Lindgren).
- new tracepoints for suspend-to-idle tracing and rework of the
prepare/complete callbacks tracing in the PM core (Todd E Brandt,
Rafael J Wysocki).
- wakeup sources framework enhancements (Jin Qian).
- new macro for noirq system PM callbacks (Grygorii Strashko).
- assorted cleanups related to system suspend (Rafael J Wysocki).
- cpuidle core cleanups to make the code more efficient (Rafael J
Wysocki).
- powernv/pseries cpuidle driver update (Shilpasri G Bhat).
- cpufreq core fixes related to CPU online/offline that should reduce
the overhead of these operations quite a bit, unless the CPU in
question is physically going away (Viresh Kumar, Saravana Kannan).
- serialization of cpufreq governor callbacks to avoid race
conditions in some cases (Viresh Kumar).
- intel_pstate driver fixes and cleanups (Doug Smythies, Prarit
Bhargava, Joe Konno).
- cpufreq driver (arm_big_little, cpufreq-dt, qoriq) updates (Sudeep
Holla, Felipe Balbi, Tang Yuantian).
- assorted cleanups in cpufreq drivers and core (Shailendra Verma,
Fabian Frederick, Wang Long).
- new Device Tree bindings for representing Operating Performance
Points (Viresh Kumar).
- updates for the common clock operations support code in the PM core
(Rajendra Nayak, Geert Uytterhoeven).
- PM domains core code update (Geert Uytterhoeven).
- Intel Knights Landing support for the RAPL (Running Average Power
Limit) power capping driver (Dasaratharaman Chandramouli).
- fixes related to the floor frequency setting on Atom SoCs in the
RAPL power capping driver (Ajay Thomas).
- runtime PM framework documentation update (Ben Dooks).
- cpupower tool fix (Herton R Krzesinski)"
* tag 'pm+acpi-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (194 commits)
cpuidle: powernv/pseries: Auto-promotion of snooze to deeper idle state
x86: Load __USER_DS into DS/ES after resume
PM / OPP: Add binding for 'opp-suspend'
PM / OPP: Allow multiple OPP tables to be passed via DT
PM / OPP: Add new bindings to address shortcomings of existing bindings
ACPI: Constify ACPI device IDs in documentation
ACPI / enumeration: Document the rules regarding the PRP0001 device ID
ACPI / video: Make acpi_video_unregister_backlight() private
acpi-video-detect: Remove old API
toshiba-acpi: Port to new backlight interface selection API
thinkpad-acpi: Port to new backlight interface selection API
sony-laptop: Port to new backlight interface selection API
samsung-laptop: Port to new backlight interface selection API
msi-wmi: Port to new backlight interface selection API
msi-laptop: Port to new backlight interface selection API
intel-oaktrail: Port to new backlight interface selection API
ideapad-laptop: Port to new backlight interface selection API
fujitsu-laptop: Port to new backlight interface selection API
eeepc-laptop: Port to new backlight interface selection API
dell-wmi: Port to new backlight interface selection API
...
|
||
|
Linus Torvalds
|
cb8a4deaf9 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina: "As usual, mostly comment, kerneldoc and printk() fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: lpfc: Grammar s/an negative/a negative/ ARM: lib/lib1funcs.S: fix typo s/substractions/subtractions/ cx25821: cx25821-medusa-reg.h: fix 0x0x prefix lib: crc-itu-t.[ch] fix 0x0x prefix in integer constants rapidio: Fix kerneldoc and comment qla4xxx: Fix printk() in qla4_83xx_read_reset_template() and qla4_83xx_pre_loopback_config() treewide: Kconfig: fix wording / spelling usb/serial: fix grammar in Kconfig help text for FTDI_SIO megaraid_sas: fix kerneldoc netfilter: ebtables: fix comment grammar drm/radeon: fix comment isdn: fix grammar in comment ARM: KVM: fix comment |
||
|
Linus Torvalds
|
0faef837e4 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching
Pull livepatching fixes from Jiri Kosina: - symbol lookup locking fix, from Miroslav Benes - error handling improvements in case of failure of the module coming notifier, from Minfei Huang - we were too pessimistic when kASLR has been enabled on x86 and were dropping address hints on the floor unnecessarily in such case. Fix from Jiri Kosina - a few other small fixes and cleanups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching: livepatch: add module locking around kallsyms calls livepatch: annotate klp_init() with __init livepatch: introduce patch/func-walking helpers livepatch: make kobject in klp_object statically allocated livepatch: Prevent patch inconsistencies if the coming module notifier fails livepatch: match return value to function signature x86: kaslr: fix build due to missing ALIGN definition livepatch: x86: make kASLR logic more accurate x86: introduce kaslr_offset() |
||
|
Linus Torvalds
|
67db8a8086 |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID updates from Jiri Kosina: - spurious power/wakeup sysfs files removal for I2C-HID devices, from Andrew Duggan - Logitech M560 support, from Goffredo Baroncelli - a lot of housekeeping cleanups to hid-lg4ff driver, from Michal Maly - improved support for Plantronics devices, from Terry Junge - Sony Motion Controller and Navigation Controller support and subsequent cleanups of hid-sony driver, from Frank Praznik and Simon Wood - HW support improvements to the Wacom driver, from Jason Gerecke and Ping Cheng - assorted small cleanups and device ID additions all over the place * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (69 commits) HID: cypress: use swap() in cp_report_fixup() HID: microsoft: Add Surface Power Cover HID: hid-sony: Fix report descriptor for Navigation Controller HID: hid-sony: Navigation controller only has 1 LED and no rumble HID: hid-sony: Add BT support for Navigation Controller HID: wacom: Introduce new 'touch_input' device HID: wacom: Split apart 'wacom_setup_pentouch_input_capabilites' HID: wacom: Introduce a new WACOM_DEVICETYPE_PAD device_type HID: wacom: Treat features->device_type values as flags HID: wacom: Simplify 'wacom_update_name' HID: rmi: Disable populating F30 when the touchpad has physical buttons HID: plantronics: Update to map volume up/down controls HID: sony: PS Move fix report descriptor HID: sony: PS3 Move enable LEDs and Rumble via BT HID: sony: Add support PS3 Move Battery via BT HID: sony: Add quirk for MOTION_CONTROLLER_BT HID: sony: Support PS3 Move Controller when connected via Bluetooth HID: i2c-hid: Do not set the ACPI companion field in the HID device usb, HID: Remove Vernier devices from lsusb and hid_ignore_list HID: hidpp: Add driver for mouse logitech M560 ... |
||
|
Linus Torvalds
|
a394c6a0b3 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia
Pull PCMCIA update from Dominik Brodowski:
"A few PCMCIA fixes and cleanups are available in the PCMCIA tree.
Most of them are trivial and self-explanatory. Of particular note are
the last three patches which add an important hardware quirk for
Toshiba ToPIC95 sockets (or BIOS breakage on systems with these
sockets), fix resource leaks in yenta_socket enable/disable call
paths, and fix a regression caused by patch
|
||
|
Linus Torvalds
|
d8133356e9 |
PCI changes for the v4.2 merge window:
Enumeration
- Move pci_ari_enabled() to global header (Alex Williamson)
- Account for ARI in _PRT lookups (Alex Williamson)
- Remove unused pci_scan_bus_parented() (Yijing Wang)
Resource management
- Use host bridge _CRS info on systems with >32 bit addressing (Bjorn Helgaas)
- Use host bridge _CRS info on Foxconn K8M890-8237A (Bjorn Helgaas)
- Fix pci_address_to_pio() conversion of CPU address to I/O port (Zhichang Yuan)
- Add pci_bus_addr_t (Yinghai Lu)
PCI device hotplug
- Wait for pciehp command completion where necessary (Alex Williamson)
- Drop pointless ACPI-based "slot detection" check (Rafael J. Wysocki)
- Check ignore_hotplug for all downstream devices (Rafael J. Wysocki)
- Propagate the "ignore hotplug" setting to parent (Rafael J. Wysocki)
- Inline pciehp "handle event" functions into the ISR (Bjorn Helgaas)
- Clean up pciehp debug logging (Bjorn Helgaas)
Power management
- Remove redundant PCIe port type checking (Yijing Wang)
- Add dev->has_secondary_link to track downstream PCIe links (Yijing Wang)
- Use dev->has_secondary_link to find downstream links for ASPM (Yijing Wang)
- Drop __pci_disable_link_state() useless "force" parameter (Bjorn Helgaas)
- Simplify Clock Power Management setting (Bjorn Helgaas)
Virtualization
- Add ACS quirks for Intel 9-series PCH root ports (Alex Williamson)
- Add function 1 DMA alias quirk for Marvell 9120 (Sakari Ailus)
MSI
- Disable MSI at enumeration even if kernel doesn't support MSI (Michael S. Tsirkin)
- Remove unused pci_msi_off() (Bjorn Helgaas)
- Rename msi_set_enable(), msix_clear_and_set_ctrl() (Michael S. Tsirkin)
- Export pci_msi_set_enable(), pci_msix_clear_and_set_ctrl() (Michael S. Tsirkin)
- Drop pci_msi_off() calls during probe (Michael S. Tsirkin)
APM X-Gene host bridge driver
- Add APM X-Gene v1 PCIe MSI/MSIX termination driver (Duc Dang)
- Add APM X-Gene PCIe MSI DTS nodes (Duc Dang)
- Disable Configuration Request Retry Status for v1 silicon (Duc Dang)
- Allow config access to Root Port even when link is down (Duc Dang)
Broadcom iProc host bridge driver
- Allow override of device tree IRQ mapping function (Hauke Mehrtens)
- Add BCMA PCIe driver (Hauke Mehrtens)
- Directly add PCI resources (Hauke Mehrtens)
- Free resource list after registration (Hauke Mehrtens)
Freescale i.MX6 host bridge driver
- Add speed change timeout message (Troy Kisky)
- Rename imx6_pcie_start_link() to imx6_pcie_establish_link() (Bjorn Helgaas)
Freescale Layerscape host bridge driver
- Use dw_pcie_link_up() consistently (Bjorn Helgaas)
- Factor out ls_pcie_establish_link() (Bjorn Helgaas)
Marvell MVEBU host bridge driver
- Remove mvebu_pcie_scan_bus() (Yijing Wang)
NVIDIA Tegra host bridge driver
- Remove tegra_pcie_scan_bus() (Yijing Wang)
Synopsys DesignWare host bridge driver
- Consolidate outbound iATU programming functions (Jisheng Zhang)
- Use iATU0 for cfg and IO, iATU1 for MEM (Jisheng Zhang)
- Add support for x8 links (Zhou Wang)
- Wait for link to come up with consistent style (Bjorn Helgaas)
- Use pci_scan_root_bus() for simplicity (Yijing Wang)
TI DRA7xx host bridge driver
- Use dw_pcie_link_up() consistently (Bjorn Helgaas)
Miscellaneous
- Include <linux/pci.h>, not <asm/pci.h> (Bjorn Helgaas)
- Remove unnecessary #includes of <asm/pci.h> (Bjorn Helgaas)
- Remove unused pcibios_select_root() (again) (Bjorn Helgaas)
- Remove unused pci_dma_burst_advice() (Bjorn Helgaas)
- xen/pcifront: Don't use deprecated function pci_scan_bus_parented() (Arnd Bergmann)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Qw+j
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"PCI changes for the v4.2 merge window:
Enumeration
- Move pci_ari_enabled() to global header (Alex Williamson)
- Account for ARI in _PRT lookups (Alex Williamson)
- Remove unused pci_scan_bus_parented() (Yijing Wang)
Resource management
- Use host bridge _CRS info on systems with >32 bit addressing (Bjorn Helgaas)
- Use host bridge _CRS info on Foxconn K8M890-8237A (Bjorn Helgaas)
- Fix pci_address_to_pio() conversion of CPU address to I/O port (Zhichang Yuan)
- Add pci_bus_addr_t (Yinghai Lu)
PCI device hotplug
- Wait for pciehp command completion where necessary (Alex Williamson)
- Drop pointless ACPI-based "slot detection" check (Rafael J. Wysocki)
- Check ignore_hotplug for all downstream devices (Rafael J. Wysocki)
- Propagate the "ignore hotplug" setting to parent (Rafael J. Wysocki)
- Inline pciehp "handle event" functions into the ISR (Bjorn Helgaas)
- Clean up pciehp debug logging (Bjorn Helgaas)
Power management
- Remove redundant PCIe port type checking (Yijing Wang)
- Add dev->has_secondary_link to track downstream PCIe links (Yijing Wang)
- Use dev->has_secondary_link to find downstream links for ASPM (Yijing Wang)
- Drop __pci_disable_link_state() useless "force" parameter (Bjorn Helgaas)
- Simplify Clock Power Management setting (Bjorn Helgaas)
Virtualization
- Add ACS quirks for Intel 9-series PCH root ports (Alex Williamson)
- Add function 1 DMA alias quirk for Marvell 9120 (Sakari Ailus)
MSI
- Disable MSI at enumeration even if kernel doesn't support MSI (Michael S. Tsirkin)
- Remove unused pci_msi_off() (Bjorn Helgaas)
- Rename msi_set_enable(), msix_clear_and_set_ctrl() (Michael S. Tsirkin)
- Export pci_msi_set_enable(), pci_msix_clear_and_set_ctrl() (Michael S. Tsirkin)
- Drop pci_msi_off() calls during probe (Michael S. Tsirkin)
APM X-Gene host bridge driver
- Add APM X-Gene v1 PCIe MSI/MSIX termination driver (Duc Dang)
- Add APM X-Gene PCIe MSI DTS nodes (Duc Dang)
- Disable Configuration Request Retry Status for v1 silicon (Duc Dang)
- Allow config access to Root Port even when link is down (Duc Dang)
Broadcom iProc host bridge driver
- Allow override of device tree IRQ mapping function (Hauke Mehrtens)
- Add BCMA PCIe driver (Hauke Mehrtens)
- Directly add PCI resources (Hauke Mehrtens)
- Free resource list after registration (Hauke Mehrtens)
Freescale i.MX6 host bridge driver
- Add speed change timeout message (Troy Kisky)
- Rename imx6_pcie_start_link() to imx6_pcie_establish_link() (Bjorn Helgaas)
Freescale Layerscape host bridge driver
- Use dw_pcie_link_up() consistently (Bjorn Helgaas)
- Factor out ls_pcie_establish_link() (Bjorn Helgaas)
Marvell MVEBU host bridge driver
- Remove mvebu_pcie_scan_bus() (Yijing Wang)
NVIDIA Tegra host bridge driver
- Remove tegra_pcie_scan_bus() (Yijing Wang)
Synopsys DesignWare host bridge driver
- Consolidate outbound iATU programming functions (Jisheng Zhang)
- Use iATU0 for cfg and IO, iATU1 for MEM (Jisheng Zhang)
- Add support for x8 links (Zhou Wang)
- Wait for link to come up with consistent style (Bjorn Helgaas)
- Use pci_scan_root_bus() for simplicity (Yijing Wang)
TI DRA7xx host bridge driver
- Use dw_pcie_link_up() consistently (Bjorn Helgaas)
Miscellaneous
- Include <linux/pci.h>, not <asm/pci.h> (Bjorn Helgaas)
- Remove unnecessary #includes of <asm/pci.h> (Bjorn Helgaas)
- Remove unused pcibios_select_root() (again) (Bjorn Helgaas)
- Remove unused pci_dma_burst_advice() (Bjorn Helgaas)
- xen/pcifront: Don't use deprecated function pci_scan_bus_parented() (Arnd Bergmann)"
* tag 'pci-v4.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (58 commits)
PCI: pciehp: Inline the "handle event" functions into the ISR
PCI: pciehp: Rename queue_interrupt_event() to pciehp_queue_interrupt_event()
PCI: pciehp: Make queue_interrupt_event() void
PCI: xgene: Allow config access to Root Port even when link is down
PCI: xgene: Disable Configuration Request Retry Status for v1 silicon
PCI: pciehp: Clean up debug logging
x86/PCI: Use host bridge _CRS info on systems with >32 bit addressing
PCI: imx6: Add #define PCIE_RC_LCSR
PCI: imx6: Use "u32", not "uint32_t"
PCI: Remove unused pci_scan_bus_parented()
xen/pcifront: Don't use deprecated function pci_scan_bus_parented()
PCI: imx6: Add speed change timeout message
PCI/ASPM: Simplify Clock Power Management setting
PCI: designware: Wait for link to come up with consistent style
PCI: layerscape: Factor out ls_pcie_establish_link()
PCI: layerscape: Use dw_pcie_link_up() consistently
PCI: dra7xx: Use dw_pcie_link_up() consistently
x86/PCI: Use host bridge _CRS info on Foxconn K8M890-8237A
PCI: pciehp: Wait for hotplug command completion where necessary
PCI: Remove unused pci_dma_burst_advice()
...
|
||
|
Linus Torvalds
|
234a56c80a |
hwmon changes for v4.2
- New driver for Microchip TC74 - Support for ncpXXwf104 added to ntc_thermistor driver - Minor cleanup -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJViAvaAAoJEMsfJm/On5mBr2UP/jAuFjcIwyEeTIRaDjSyqPCm y/wEGGIBhXg3VEbOnGLz7lrJvnZiQ4Ma7dPrY9QJmaY2l0mPmDLcc6iwQ0vl+pnS uCP2g5q5w0C8uvaqHvY6oN75uMgS6TpJBfnHKtGVE1xf7+HmQ/tLHOIP/DTXBWjs p/f0AQiwfjt2nepaI+Lemqasw3rLtgO6Ne2w3gDK//g35elgBcdCst+xPv9o5YdW SBoyde6OzBVmqOgf2svzlWwK/hLTEUYVBSTMs1UpzJE/M6HWaPoAbjLkuDNWMwE7 V1HhV6kwpuf+WHyJbPDV0rQLseKpDHQGFGwb3pu7f7oVmOKlKBrymesiHooit+9i s23wzB5Kezikyskcd4rC2CWBIyd6r43ngkuyJYyOfqKEkYmBuhQIpfkdtc4wFPce TTWdUOBOFAvhKRMYXMTgPvVkBuCkp/6LI/8UIj08LdMStQwkg0Ehg6xZha6UWZQf 0cUPoTiUjfiuWlYr3g2siTSKMOQXX4eOU8ywloelr8NORQexk9d3Bihl8B/npRcm prriEUVrriNGFgwEpwK4DrdKhMUAZnjV3ZUGtD43XXmSHkNfmdBCOQqW5NO9t03l /JLtc3tnaMNmv7TeOiAxhxQWUppFq5JRfJ6DO33yl5Ij98M9rL9rmDa2tz6+nVy1 67ufV9zu4cRYkMIqQVrQ =ZKHZ -----END PGP SIGNATURE----- Merge tag 'hwmon-for-linus-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: - new driver for Microchip TC74 - support for ncpXXwf104 added to ntc_thermistor driver - minor cleanup * tag 'hwmon-for-linus-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: add driver for Microchip TC74 hwmon: (ntc_thermistor) Improve precision of resistance calculation hwmon: (ntc_thermistor) fix iio raw to microvolts conversion hwmon: (atxp1) Drop auto-detection hwmon: (atxp1) Drop FSF mailing address hwmon: Allow compile test of GPIO consumers if !GPIOLIB hwmon: (sht15) Constify platform_device_id hwmon: (max197) Constify platform_device_id hwmon: (ntc_thermistor) Add support for ncpXXwf104 |
||
|
Linus Torvalds
|
a57f14bac0 |
MMC core:
- Fix an error path in the mmc block layer - Fix PM domain attachment for the SDIO bus - Add support for driver strength selection - Increase a delay to let voltage stabilize - Add support for disabling write-protect detection - Add facility to support re-tuning - Re-tune and retry in the recovery path - Add reset option for SDIO - Consolidations and clean-ups MMC host: - Add Mediatek MMC driver - Constify platform_device_id for a couple of hosts - Fix modalias to make module auto-loading work for a couple of hosts - sdhci: Add support for sdhci-arasan4.9a - sdhci: Fix low memory corruption - sdhci: Restore behavior while creating OCR mask - sdhci: Add a callback to select drive strength - sdhci: Fix driver type B and D handling - sdhci: Add support for drive strength selection for SPT - sdhci: Enable HS400 for some Intel host controllers - sdhci: Convert to use the new re-tuning facility - sdhci: Various minor fixes and clean-ups - dw_mmc: Add support for hi6220 - dw_mmc: Use core to handle absent write protect line - dw_mmc: Add support to switch voltage - tmio: Some fixes and modernizations - sh_mmcif: Improve clock rate calculation -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJVh+y8AAoJEP4mhCVzWIwp+fYQAIlZVzdLVCAgHHMKHlXeJ/Ib 5Ltf7Vi6kO9WJUQc+/X0kicidNjeOiw8qvItYeZpVvZCuzMnBXLHGt99G0ACvagw hS/4GsI+keNbBLTlSriZVxMdjEbB4RIkC5TWsHuhcP16L6UmgDVil3Hqf6qasGU2 cAr9lSUpe3uYlgyn7W5voolVWU2PNJq7Cy5E3y1052VbUsnhJZRvpsoCne++nG2O rJH9BQauVQ08VX3S6PcXYYDk2xe2rk7ExTiNw+tuMhjZkcd3dlKBRajoALpBqYFS nY3nSfMIVm1PmzpklrgF+7gUTdlihmi0ao1DsrFBHRISZ/ljb7yQ5Vma8Pg36NVK tdrZSBiOWhIXTgp+AIUSjuyv8S2wwsFozsmkVUNyA6XmfVmq2+lqz6rA7w+OIm7D iS9SBsAz1Iv6gpt388/Bb/yxULvYOVKECmORydu21yXxHT7eWTVfvQYHC9h40qhw oL86omRVFbeuouM1T867aFWKzaeA7hLXKbC4sWxdypyE2bPLraiC5izjlh4p3RzH UkQ4UUsym7b0UlL4lxKTUgRD8FuGK0ML+zeRsA1VgJmcCdzRaa2NFQfrX5aMVSgc iJ2zkHdxLCxkKTfcNn3k+B0PH3tMMn2cPIE7AhoVaIl79ACg9UB+/wG8f5pIifh5 pPCWXFcaJ7gJkYpFDTnJ =ofUZ -----END PGP SIGNATURE----- Merge tag 'mmc-v4.2' of git://git.linaro.org/people/ulf.hansson/mmc Pull MMC updates from Ulf Hansson: "Here are the changes for MMC for v4.2. MMC core: - Fix an error path in the mmc block layer - Fix PM domain attachment for the SDIO bus - Add support for driver strength selection - Increase a delay to let voltage stabilize - Add support for disabling write-protect detection - Add facility to support re-tuning - Re-tune and retry in the recovery path - Add reset option for SDIO - Consolidations and clean-ups MMC host: - Add Mediatek MMC driver - Constify platform_device_id for a couple of hosts - Fix modalias to make module auto-loading work for a couple of hosts - sdhci: Add support for sdhci-arasan4.9a - sdhci: Fix low memory corruption - sdhci: Restore behavior while creating OCR mask - sdhci: Add a callback to select drive strength - sdhci: Fix driver type B and D handling - sdhci: Add support for drive strength selection for SPT - sdhci: Enable HS400 for some Intel host controllers - sdhci: Convert to use the new re-tuning facility - sdhci: Various minor fixes and clean-ups - dw_mmc: Add support for hi6220 - dw_mmc: Use core to handle absent write protect line - dw_mmc: Add support to switch voltage - tmio: Some fixes and modernizations - sh_mmcif: Improve clock rate calculation" * tag 'mmc-v4.2' of git://git.linaro.org/people/ulf.hansson/mmc: (98 commits) mmc: queue: prevent soft lockups on PREEMPT=n mmc: mediatek: Add PM support for MMC driver mmc: mediatek: Add Mediatek MMC driver mmc: dt-bindings: add Mediatek MMC bindings mmc: card: Fixup request missing in mmc_blk_issue_rw_rq mmc: sdhci: fix low memory corruption mmc: sdhci-pci: Change AMD SDHCI quirk application scope i2c-piix4: Use Macro for AMD CZ SMBus device ID pci_ids: Add AMD KERNCZ device ID support mmc: queue: use swap() in mmc_queue_thread() mmc: dw_mmc: insmod followed by rmmod will hung for eMMC mmc: sdhci: Restore behavior while creating OCR mask mmc: sdhci-pxav3: fix device wakeup initialization mmc: core: Attach PM domain prior probing of SDIO func driver mmc: core: Remove redundant ->power_restore() callback for SD mmc: core: Remove redundant ->power_restore() callback for MMC mmc: sdhci-bcm2835: Actually enable the clock mmc: sdhci-bcm2835: Clean up platform allocations if sdhci init fails. mmc: sdhci-of-esdhc: enable interrupt mode to detect card mmc: sdhci-esdhc-imx: add quirk SDHCI_QUIRK2_BROKEN_HS200 for imx6qdl ... |
||
|
Linus Torvalds
|
10b4b096d0 |
This is the big bulk of GPIO changes queued for the v4.2
kernel series:
- A big set of cleanups to the aged sysfs interface from
Johan Hovold. To get these in, v4.1-rc3 was merged into
the tree as the first patch in that series had to go
into stable. This makes the locking much more fine-grained
(get rid of the "big GPIO lock(s)" and store states in the
GPIO descriptors.
- Rename gpiod_[g|s]et_array() to gpiod_[g|s]et_array_value()
to avoid confusions.
- New drivers for:
- NXP LPC18xx (currently LPC1850)
- NetLogic XLP
- Broadcom STB SoC's
- Axis ETRAXFS
- Zynq Ultrascale+ (subdriver)
- ACPI:
- Make it possible to retrieve GpioInt resources from
a GPIO device using acpi_dev_gpio_irq_get()
- Merge some dependent I2C changes exploiting this.
- Support the ARM X-Gene GPIO standby driver.
- Make it possible for the generic GPIO driver to read
back the value set registers to reflect current
status.
- Loads of OMAP IRQ handling fixes.
- Incremental improvements to Kona, max732x, OMAP, MXC, RCAR,
PCA953x, STP-XWAY, PCF857x, Crystalcove, TB10x.
- Janitorial (contification, checkpatch cleanups)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=vKYs
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull gpio updates from Linus Walleij:
"This is the big bulk of GPIO changes queued for the v4.2 kernel
series:
- a big set of cleanups to the aged sysfs interface from Johan
Hovold. To get these in, v4.1-rc3 was merged into the tree as the
first patch in that series had to go into stable. This makes the
locking much more fine-grained (get rid of the "big GPIO lock(s)"
and store states in the GPIO descriptors.
- rename gpiod_[g|s]et_array() to gpiod_[g|s]et_array_value() to
avoid confusions.
- New drivers for:
* NXP LPC18xx (currently LPC1850)
* NetLogic XLP
* Broadcom STB SoC's
* Axis ETRAXFS
* Zynq Ultrascale+ (subdriver)
- ACPI:
* make it possible to retrieve GpioInt resources from a GPIO
device using acpi_dev_gpio_irq_get()
* merge some dependent I2C changes exploiting this.
* support the ARM X-Gene GPIO standby driver.
- make it possible for the generic GPIO driver to read back the value
set registers to reflect current status.
- loads of OMAP IRQ handling fixes.
- incremental improvements to Kona, max732x, OMAP, MXC, RCAR,
PCA953x, STP-XWAY, PCF857x, Crystalcove, TB10x.
- janitorial (constification, checkpatch cleanups)"
* tag 'gpio-v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (71 commits)
gpio: Fix checkpatch.pl issues
gpio: pcf857x: handle only enabled irqs
gpio / ACPI: Return -EPROBE_DEFER if the gpiochip was not found
GPIO / ACPI: export acpi_gpiochip_request(free)_interrupts for module use
gpio: improve error reporting on own descriptors
gpio: promote own request failure to pr_err()
gpio: Added support to Zynq Ultrascale+ MPSoC
gpio: add ETRAXFS GPIO driver
fix documentation after renaming gpiod_set_array to gpiod_set_array_value
gpio: Add GPIO support for Broadcom STB SoCs
gpio: xgene: add ACPI support for APM X-Gene GPIO standby driver
gpio: tb10x: Drop unneeded free_irq() call
gpio: crystalcove: set IRQCHIP_SKIP_SET_WAKE for the irqchip
gpio: stp-xway: Use the of_property_read_u32 helper
gpio: pcf857x: Check for irq_set_irq_wake() failures
gpio-stp-xway: Fix enabling the highest bit of the PHY LEDs
gpio: Prevent an integer overflow in the pca953x driver
gpio: omap: rework omap_gpio_irq_startup to handle current pin state properly
gpio: omap: rework omap_gpio_request to touch only gpio specific registers
gpio: omap: rework omap_x_irq_shutdown to touch only irqs specific registers
...
|
||
|
Linus Torvalds
|
c70c5fb2b9 |
pwm: Changes for v4.2-rc1
This has a couple of fixes for Atmel, Samsung and Broadcom drivers. Some preparatory patches for more upcoming Intel work is included as well. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABCAAGBQJVevH0AAoJEN0jrNd/PrOhUDsP/0N3DTBrwHGY2TRtniXK5PsX Dz9Txm1dUlSRc/4QmYfmBPB3GzgtbKMAXP/SJBJ5SP48RZYvzjfHLxEKEoJqkMg+ h9btE1fReQ50H0HmH4L8+jkjSsA15m39T5yuX+KR5P6Uxv7WFMyVDgBw4dmARIzK wOwuy8r+6ZtAdsj+o0eSoOxs64HgUiJRN/9FDJi9fPGi27smAXH2Nef5uja9upnt CR+ntOxYXXRJM2JnW9ObPK87wvZsiIJw1QrRIWPRaUesZjXxH+11eTKS4YaSjnhz 93aLDWXVBm9goXeYnqe+aRq0PHIRIHcND6Fh4+cb42dVYdINnW6h9Y9WBSUeVHwx cKumJUU6wBbTSUUWKnvGi1NFmrMvxbf3knE0maQjswHOf5SEdCh0q/VNh/HWGGPI sglqjl5KmJPx9Afr97RNNqymYS9ECT0yHajY+5ivgvD4XlPFam2NPpyi1CjJaqaU rnwhabnpnpq7zeD78f5gvLSENWvwnYCVQTwp0YLkJ2o+9gGPh+FuJ6KcZ3m7LGXC jb1VuAy+0896eP3VlK1LqwDkyBVFkWZQqwuLnER6zHuMTetx0tfosj8Nenv0z+fv VccUDgYuh8G/SHYNDVdpRmHDIb34ZpMjSxbXaFOKTPsxAhlNfu4ylcrKZijIkK+a YmYJgj9pGqww50LVK0R/ =VmI2 -----END PGP SIGNATURE----- Merge tag 'pwm/for-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This has a couple of fixes for Atmel, Samsung and Broadcom drivers. Some preparatory patches for more upcoming Intel work is included as well" * tag 'pwm/for-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: lpss: pci: Add support for Broxton platform pwm: bcm-kona: Don't set polarity in probe pwm: Add pwmchip_add_with_polarity() API pwm: atmel: Fix incorrect CDTY value after disabling pwm: atmel: Fix incorrect CDTY value after enabling pwm: samsung: Use MODULE_DEVICE_TABLE() to include OF modalias pwm: Add support to remove registered consumer lookup tables |