renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-28 15:13:55 +08:00
Code
767,523 Commits 41 Branches 2 Tags 3.4 GiB
59a8f43b63
Commit Graph

3297 Commits

Author SHA1 Message Date
Guenter Roeck
91bb8f45f7 hwmon: (nct6775) Fix loop limit 
Commit cc66b30382 ("hwmon: (nct6775) Rework temperature source and label
handling") changed a loop limit from "data->temp_label_num - 1" to "32",
as part of moving from a string array to a bit mask. This results in the
following error, reported by UBSAN.

UBSAN: Undefined behaviour in drivers/hwmon/nct6775.c:4179:27
shift exponent 32 is too large for 32-bit type 'long unsigned int'

Similar to the original loop, the limit has to be one less than the
number of bits.

Fixes: cc66b30382 ("hwmon: (nct6775) Rework temperature source and label handling")
Reported-by: Paul Menzel <pmenzel+linux-hwmon@molgen.mpg.de>
Cc: Paul Menzel <pmenzel+linux-hwmon@molgen.mpg.de>
Tested-by: Paul Menzel <pmenzel+linux-hwmon@molgen.mpg.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
 2018-06-16 16:40:36 -07:00
Helge Eichelberg
536e0019b7 hwmon: (dell-smm) Disable fan support for Dell XPS13 9333 
Calling fan related SMM functions implemented by Dell BIOS firmware on Dell
XPS13 9333 freeze kernel for about 500ms. Until Dell fixes it we need to
disable fan support for Dell XPS13 9333.

Via "force" module param fan support can be enabled.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=195751
Signed-off-by: Helge Eichelberg <kernelorg@elchenberg.name>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
 2018-06-16 16:40:36 -07:00
Kees Cook
a86854d0c5 treewide: devm_kzalloc() -> devm_kcalloc() 
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc().
This patch replaces cases of:

        devm_kzalloc(handle, a * b, gfp)

with:
        devm_kcalloc(handle, a * b, gfp)

as well as handling cases of:

        devm_kzalloc(handle, a * b * c, gfp)

with:

        devm_kzalloc(handle, array3_size(a, b, c), gfp)

as it's slightly less ugly than:

        devm_kcalloc(handle, array_size(a, b), c, gfp)

This does, however, attempt to ignore constant size factors like:

        devm_kzalloc(handle, 4 * 1024, gfp)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

Some manual whitespace fixes were needed in this patch, as Coccinelle
really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...".

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
expression HANDLE;
type TYPE;
expression THING, E;
@@

(
  devm_kzalloc(HANDLE,
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  devm_kzalloc(HANDLE,
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression HANDLE;
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  devm_kzalloc(HANDLE,
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
expression HANDLE;
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * (COUNT_ID)
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * COUNT_ID
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * (COUNT_CONST)
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * COUNT_CONST
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * (COUNT_ID)
+	COUNT_ID, sizeof(THING)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * COUNT_ID
+	COUNT_ID, sizeof(THING)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * (COUNT_CONST)
+	COUNT_CONST, sizeof(THING)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * COUNT_CONST
+	COUNT_CONST, sizeof(THING)
  , ...)
)

// 2-factor product, only identifiers.
@@
expression HANDLE;
identifier SIZE, COUNT;
@@

- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	SIZE * COUNT
+	COUNT, SIZE
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression HANDLE;
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  devm_kzalloc(HANDLE,
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression HANDLE;
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  devm_kzalloc(HANDLE,
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  devm_kzalloc(HANDLE,
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
expression HANDLE;
identifier STRIDE, SIZE, COUNT;
@@

(
  devm_kzalloc(HANDLE,
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  devm_kzalloc(HANDLE,
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression HANDLE;
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  devm_kzalloc(HANDLE, C1 * C2 * C3, ...)
|
  devm_kzalloc(HANDLE,
-	(E1) * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  devm_kzalloc(HANDLE,
-	(E1) * (E2) * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  devm_kzalloc(HANDLE,
-	(E1) * (E2) * (E3)
+	array3_size(E1, E2, E3)
  , ...)
|
  devm_kzalloc(HANDLE,
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression HANDLE;
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@

(
  devm_kzalloc(HANDLE, sizeof(THING) * C2, ...)
|
  devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...)
|
  devm_kzalloc(HANDLE, C1 * C2 * C3, ...)
|
  devm_kzalloc(HANDLE, C1 * C2, ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * (E2)
+	E2, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(TYPE) * E2
+	E2, sizeof(TYPE)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * (E2)
+	E2, sizeof(THING)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	sizeof(THING) * E2
+	E2, sizeof(THING)
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	(E1) * E2
+	E1, E2
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	(E1) * (E2)
+	E1, E2
  , ...)
|
- devm_kzalloc
+ devm_kcalloc
  (HANDLE,
-	E1 * E2
+	E1, E2
  , ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>
 2018-06-12 16:19:22 -07:00
Kees Cook
6396bb2215 treewide: kzalloc() -> kcalloc() 
The kzalloc() function has a 2-factor argument form, kcalloc(). This
patch replaces cases of:

        kzalloc(a * b, gfp)

with:
        kcalloc(a * b, gfp)

as well as handling cases of:

        kzalloc(a * b * c, gfp)

with:

        kzalloc(array3_size(a, b, c), gfp)

as it's slightly less ugly than:

        kzalloc_array(array_size(a, b), c, gfp)

This does, however, attempt to ignore constant size factors like:

        kzalloc(4 * 1024, gfp)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
  kzalloc(
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  kzalloc(
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  kzalloc(
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (COUNT_ID)
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * COUNT_ID
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (COUNT_CONST)
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * COUNT_CONST
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (COUNT_ID)
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * COUNT_ID
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (COUNT_CONST)
+	COUNT_CONST, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * COUNT_CONST
+	COUNT_CONST, sizeof(THING)
  , ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

- kzalloc
+ kcalloc
  (
-	SIZE * COUNT
+	COUNT, SIZE
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  kzalloc(
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  kzalloc(
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kzalloc(
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
  kzalloc(
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  kzalloc(C1 * C2 * C3, ...)
|
  kzalloc(
-	(E1) * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	(E1) * (E2) * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	(E1) * (E2) * (E3)
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@

(
  kzalloc(sizeof(THING) * C2, ...)
|
  kzalloc(sizeof(TYPE) * C2, ...)
|
  kzalloc(C1 * C2 * C3, ...)
|
  kzalloc(C1 * C2, ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (E2)
+	E2, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * E2
+	E2, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (E2)
+	E2, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * E2
+	E2, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	(E1) * E2
+	E1, E2
  , ...)
|
- kzalloc
+ kcalloc
  (
-	(E1) * (E2)
+	E1, E2
  , ...)
|
- kzalloc
+ kcalloc
  (
-	E1 * E2
+	E1, E2
  , ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>
 2018-06-12 16:19:22 -07:00
Linus Torvalds
c90fca951e powerpc updates for 4.18 
Notable changes:
 
  - Support for split PMD page table lock on 64-bit Book3S (Power8/9).
 
  - Add support for HAVE_RELIABLE_STACKTRACE, so we properly support live
    patching again.
 
  - Add support for patching barrier_nospec in copy_from_user() and syscall entry.
 
  - A couple of fixes for our data breakpoints on Book3S.
 
  - A series from Nick optimising TLB/mm handling with the Radix MMU.
 
  - Numerous small cleanups to squash sparse/gcc warnings from Mathieu Malaterre.
 
  - Several series optimising various parts of the 32-bit code from Christophe Leroy.
 
  - Removal of support for two old machines, "SBC834xE" and "C2K" ("GEFanuc,C2K"),
    which is why the diffstat has so many deletions.
 
 And many other small improvements & fixes.
 
 There's a few out-of-area changes. Some minor ftrace changes OK'ed by Steve, and
 a fix to our powernv cpuidle driver. Then there's a series touching mm, x86 and
 fs/proc/task_mmu.c, which cleans up some details around pkey support. It was
 ack'ed/reviewed by Ingo & Dave and has been in next for several weeks.
 
 Thanks to:
   Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Al Viro, Andrew
   Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd Bergmann, Balbir Singh,
   Cédric Le Goater, Christophe Leroy, Christophe Lombard, Colin Ian King, Dave
   Hansen, Fabio Estevam, Finn Thain, Frederic Barrat, Gautham R. Shenoy, Haren
   Myneni, Hari Bathini, Ingo Molnar, Jonathan Neuschäfer, Josh Poimboeuf,
   Kamalesh Babulal, Madhavan Srinivasan, Mahesh Salgaonkar, Mark Greer, Mathieu
   Malaterre, Matthew Wilcox, Michael Neuling, Michal Suchanek, Naveen N. Rao,
   Nicholas Piggin, Nicolai Stange, Olof Johansson, Paul Gortmaker, Paul
   Mackerras, Peter Rosin, Pridhiviraj Paidipeddi, Ram Pai, Rashmica Gupta, Ravi
   Bangoria, Russell Currey, Sam Bobroff, Samuel Mendoza-Jonas, Segher
   Boessenkool, Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stewart Smith,
   Thiago Jung Bauermann, Torsten Duwe, Vaibhav Jain, Wei Yongjun, Wolfram Sang,
   Yisheng Xie, YueHaibing.
 -----BEGIN PGP SIGNATURE-----
 
 iQIwBAABCAAaBQJbGQKBExxtcGVAZWxsZXJtYW4uaWQuYXUACgkQUevqPMjhpYBq
 TRAAioK7rz5xYMkxaM3Ng3ybobEeNAwQqOolz98xvmnB9SfDWNuc99vf8cGu0/fQ
 zc8AKZ5RcnwipOjyGlxW9oa1ZhVq0xtYnQPiYLEKMdLQmh5D+C7+KpvAd1UElweg
 ub40/xDySWfMujfuMSF9JDCWPIXyojt4Xg5nJKIVRrAm/3YMe/+i5Am7NWHuMCEb
 aQmZtlYW5Mz81XY0968hjpUO6eKFRmsaM7yFAhGTXx6+oLRpGj1PZB4AwdRIKS2L
 Ak7q/VgxtE4W+s3a0GK2s+eXIhGKeFuX9AVnx3nti+8/K1OqrqhDcLMUC/9JpCpv
 EvOtO7dxPnZujHjdu4Eai/xNoo4h6zRy7bWqve9LoBM40CP5jljKzu1lwqqb5yO0
 jC7/aXhgiSIxxcRJLjoI/TYpZPu40MifrkydmczykdPyPCnMIWEJDcj4KsRL/9Y8
 9SSbJzRNC/SgQNTbUYPZFFi6G0QaMmlcbCb628k8QT+Gn3Xkdf/ZtxzqEyoF4Irq
 46kFBsiSSK4Bu0rVlcUtJQLgdqytWULO6NKEYnD67laxYcgQd8pGFQ8SjZhRZLgU
 q5LA3HIWhoAI4M0wZhOnKXO6JfiQ1UbO8gUJLsWsfF0Fk5KAcdm+4kb4jbI1H4Qk
 Vol9WNRZwEllyaiqScZN9RuVVuH0GPOZeEH1dtWK+uWi0lM=
 =ZlBf
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Notable changes:

   - Support for split PMD page table lock on 64-bit Book3S (Power8/9).

   - Add support for HAVE_RELIABLE_STACKTRACE, so we properly support
     live patching again.

   - Add support for patching barrier_nospec in copy_from_user() and
     syscall entry.

   - A couple of fixes for our data breakpoints on Book3S.

   - A series from Nick optimising TLB/mm handling with the Radix MMU.

   - Numerous small cleanups to squash sparse/gcc warnings from Mathieu
     Malaterre.

   - Several series optimising various parts of the 32-bit code from
     Christophe Leroy.

   - Removal of support for two old machines, "SBC834xE" and "C2K"
     ("GEFanuc,C2K"), which is why the diffstat has so many deletions.

  And many other small improvements & fixes.

  There's a few out-of-area changes. Some minor ftrace changes OK'ed by
  Steve, and a fix to our powernv cpuidle driver. Then there's a series
  touching mm, x86 and fs/proc/task_mmu.c, which cleans up some details
  around pkey support. It was ack'ed/reviewed by Ingo & Dave and has
  been in next for several weeks.

  Thanks to: Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Al
  Viro, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd
  Bergmann, Balbir Singh, Cédric Le Goater, Christophe Leroy, Christophe
  Lombard, Colin Ian King, Dave Hansen, Fabio Estevam, Finn Thain,
  Frederic Barrat, Gautham R. Shenoy, Haren Myneni, Hari Bathini, Ingo
  Molnar, Jonathan Neuschäfer, Josh Poimboeuf, Kamalesh Babulal,
  Madhavan Srinivasan, Mahesh Salgaonkar, Mark Greer, Mathieu Malaterre,
  Matthew Wilcox, Michael Neuling, Michal Suchanek, Naveen N. Rao,
  Nicholas Piggin, Nicolai Stange, Olof Johansson, Paul Gortmaker, Paul
  Mackerras, Peter Rosin, Pridhiviraj Paidipeddi, Ram Pai, Rashmica
  Gupta, Ravi Bangoria, Russell Currey, Sam Bobroff, Samuel
  Mendoza-Jonas, Segher Boessenkool, Shilpasri G Bhat, Simon Guo,
  Souptick Joarder, Stewart Smith, Thiago Jung Bauermann, Torsten Duwe,
  Vaibhav Jain, Wei Yongjun, Wolfram Sang, Yisheng Xie, YueHaibing"

* tag 'powerpc-4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (251 commits)
  powerpc/64s/radix: Fix missing ptesync in flush_cache_vmap
  cpuidle: powernv: Fix promotion from snooze if next state disabled
  powerpc: fix build failure by disabling attribute-alias warning in pci_32
  ocxl: Fix missing unlock on error in afu_ioctl_enable_p9_wait()
  powerpc-opal: fix spelling mistake "Uniterrupted" -> "Uninterrupted"
  powerpc: fix spelling mistake: "Usupported" -> "Unsupported"
  powerpc/pkeys: Detach execute_only key on !PROT_EXEC
  powerpc/powernv: copy/paste - Mask SO bit in CR
  powerpc: Remove core support for Marvell mv64x60 hostbridges
  powerpc/boot: Remove core support for Marvell mv64x60 hostbridges
  powerpc/boot: Remove support for Marvell mv64x60 i2c controller
  powerpc/boot: Remove support for Marvell MPSC serial controller
  powerpc/embedded6xx: Remove C2K board support
  powerpc/lib: optimise PPC32 memcmp
  powerpc/lib: optimise 32 bits __clear_user()
  powerpc/time: inline arch_vtime_task_switch()
  powerpc/Makefile: set -mcpu=860 flag for the 8xx
  powerpc: Implement csum_ipv6_magic in assembly
  powerpc/32: Optimise __csum_partial()
  powerpc/lib: Adjust .balign inside string functions for PPC32
  ...
 2018-06-07 10:23:33 -07:00
Bastian Germann
c9bdf29154 hwmon: (asus_atk0110) Make use of device managed memory 
Use devm_* variants of kstrdup and kzalloc. Get rid of kfree cleanups.

Signed-off-by: Bastian Germann <bastiangermann@fishpost.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
 2018-06-01 09:38:36 -07:00
Bastian Germann
3c60726d21 hwmon: (asus_atk0110) Replace deprecated device register call 
Make the asus_atk0110 driver use hwmon_device_register_with_groups instead
of the deprecated hwmon_device_register.
Construct the expected attribute_group array from the sensor list which
contains all needed attributes.
Remove the manual sysfs file creation and deletion that are now taken care
of by the (un)register calls via the attribute_group array.

Signed-off-by: Bastian Germann <bastiangermann@fishpost.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
 2018-06-01 09:34:54 -07:00
Colin Ian King
fb8eefd3b4 hwmon: (k10temp) Make function get_raw_temp static 
The function get_raw_temp is local to the source and does not need to
be in global scope, so make it static.

Cleans up sparse warning:
drivers/hwmon/k10temp.c:149:14: warning: symbol 'get_raw_temp' was not
declared. Should it be static?

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
 2018-06-01 08:56:35 -07:00
Guenter Roeck
9e3699fcfd Immutable branch between MFD and HWMON due for the v4.18 merge window 
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJa1JE2AAoJEFGvii+H/Hdh0asQAK0hUgpLw9PabNYobrN6FMzH
 tsotCyCIuMDMakONtVj9ijZ7Urrj2rCsPC1282ZlTnzbLxqTyguQWDZQh70dxBo5
 CMeuQWm1BLflPSmI/uF0nvgmiSN0CJJtH8NbyIXAoe6NGMI+sjPBtNy69GYH7QO0
 TJXa5m6+lA79clnXZOeN0aLKMNc1Z+jwZEXr0G30DsHRClhDgEAHodag0vITiGOr
 bnBeWivxdvJWF9gdxPaUr0HvDjVQATzpa0vtZfjjDoTlDOMa+4P2ow7I1fADDEDp
 S1AERTgFIwQsUZPuxKvSjZZMZqCbKvbJuTCko9NgOBc6FVDNMl0SQpb4QrpmKUIn
 1wsFZEh6O7gZB8zz2Lw/tVbZTDK9KJUGPcl6FX2vjy3GX+jo9yO5ya2/Fy7iGQRn
 YjaXprt4G4w/qMBQGbvAJN0avMy7YoDJTO4biCOSRbw4W7GnV6xFRisKImVAdRk9
 IuiIUlpGO7IfZ0MYC07WqGa4HfINf35m24L1kJpymM2XO+QtzcyMemOtR6or6O9s
 xneXkvGBmJLUKyGoCQH/a9PVXTwvWfl0ycREbklxloZOque5hr42CueykezJ1NR5
 v0HfIp95HOp5sPMVXlW10O63hTkt2r/4U33c5y7+CzQtkBbBYTJrpTD3/poFr8D+
 srJEd7OjWytOfSLZA/FO
 =r+0D
 -----END PGP SIGNATURE-----

Merge tag 'ib-mfd-hwmon-v4.18' into hwmon-next

Immutable branch between MFD and HWMON due for the v4.18 merge window
 2018-05-21 07:52:40 -07:00
Tom Levens
5d9ca430ea hwmon: (ltc2990) support all measurement modes 
Updated version of the ltc2990 driver which supports all measurement
modes (current, voltage, temperature) available in the chip.

If devicetree is used, the mode must be specified with the property
"lltc,meas-mode". The format and possible values of the property are
described in the binding.

If devicetree is not used, the mode of the chip will not be configured.
Unless the chip is configured by another source, only the internal
temperature and supply voltage will be measured.

Signed-off-by: Tom Levens <tom.levens@cern.ch>
Tested-By: mike.looijmans@topic.nl
[groeck: Fixed compiler warning]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
 2018-05-21 07:52:01 -07:00
Tom Levens
a6282d1703 hwmon: (ltc2990) Fix incorrect conversion of negative temperatures 
Fix incorrect conversion of negative temperatures by using
sign_extend32() instead of a home-grown conversion function.

Fixes: df92270357 ("hwmon: Add LTC2990 sensor driver")
Signed-off-by: Tom Levens <tom.levens@cern.ch>
[groeck: Updated subject and description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
 2018-05-21 07:52:00 -07:00
Lucas Magasweran
59df4f4e8e hwmon: (core) check parent dev != NULL when chip != NULL 
hwmon_device_register_with_info() registration API requires a
non-NULL parent device when chip is non-NULL.

This commit adds a check and documents this requirement.

Signed-off-by: Lucas Magasweran <lucas.magasweran@ieee.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
 2018-05-21 07:51:59 -07:00
Wolfram Sang
2b2acdc889 hwmon: (fschmd) fix typo 'can by' to 'can be' 
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
 2018-05-21 07:51:59 -07:00
Guenter Roeck
f934c0599e hwmon: (k10temp) Display both Tctl and Tdie 
On some AMD CPUs, there is a different between the die temperature
(Tdie) and the reported temperature (Tctl). Tdie is the real measured
temperature, and Tctl is used for fan control. Lets report both for
affected CPUs.

Tested-by: Gabriel Craciunescu <nix.or.die@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
 2018-05-21 07:51:58 -07:00
Guenter Roeck
ccaf63b4d6 hwmon: (k10temp) Add support for Stoney Ridge and Bristol Ridge CPUs 
Add support for Stoney Ridge and Bristol Ridge (Family 15h Model 0x70)
CPUs. Registers match those of Family 15h Model 0x60.

Cc: stable@vger.kernel.org # v4.16+
Tested-by: Gabriel Craciunescu <nix.or.die@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
 2018-05-21 07:51:57 -07:00
Shilpasri G Bhat
43d2974b66 hwmon: (ibmpowernv) Add energy sensors 
This patch exports the accumulated power numbers of each power
sensor maintained by OCC.

Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
 2018-05-21 14:48:03 +10:00
Shilpasri G Bhat
3c8c049aa7 hwmon: (ibmpowernv): Add support to read 64 bit sensors 
The firmware has supported for reading sensor values of size u32.
This patch adds support to use newer firmware functions which allows
to read the sensors of size u64.

Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
 2018-05-21 14:48:03 +10:00
Guenter Roeck
3b031622f5 hwmon: (k10temp) Use API function to access System Management Network 
The SMN (System Management Network) on Family 17h AMD CPUs is also accessed
from other drivers, specifically EDAC. Accessing it directly is racy.
On top of that, accessing the SMN through root bridge 00:00 is wrong on
multi-die CPUs and may result in reading the temperature from the wrong
die. Use available API functions to fix the problem.

For this to work, add dependency on AMD_NB. Also change the Raven Ridge
PCI device ID to point to Data Fabric Function 3, since this ID is used
by the API functions to find the CPU node.

Cc: stable@vger.kernel.org # v4.16+
Tested-by: Gabriel Craciunescu <nix.or.die@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
 2018-05-13 09:00:49 -07:00
Guenter Roeck
40626a1bf6 hwmon: (k10temp) Fix reading critical temperature register 
The HTC (Hardware Temperature Control) register has moved
for recent chips.

Cc: stable@vger.kernel.org # v4.16+
Tested-by: Gabriel Craciunescu <nix.or.die@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
 2018-04-29 14:21:45 -07:00
Guenter Roeck
877d8948d0 hwmon: (k10temp) Add support for AMD Ryzen w/ Vega graphics 
Enable k10temp for AMD Ryzen APUs w/ Vega Mobile Gfx.

Based on patch from René Rebe <rene@exactcode.de>. Dropped temperature
offsets since those are not supposed to apply for the affected CPUs.

Cc: stable@vger.kernel.org # v4.16+
Cc: René Rebe <rene@exactcode.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
 2018-04-25 05:31:06 -07:00
Guenter Roeck
1b59788979 hwmon: (k10temp) Add temperature offset for Ryzen 2700X 
Ryzen 2700X has a temperature offset of 10 degrees C. If bit 19 of the
Temperature Control register is set, there is an additional offset of
49 degrees C. Take this into account as well.

Cc: stable@vger.kernel.org # v4.16+
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
 2018-04-25 05:23:20 -07:00
Guenter Roeck
dbac00f0cf hwmon: (nct6683) Enable EC access if disabled at boot 
On Asrock Z370M Pro4, it was observed that EC access was disabled after
initially booting the system. As a result, the driver failed to load
with
	nct6683: EC is disabled
After a suspend/resume cycle, the driver loaded correctly.
	nct6683: Found NCT6683D or compatible chip at 0x2e:0xa20
	nct6683 nct6683.2592: NCT6683D EC firmware version 1.0 build 07/18/16

Enable EC access after identifying the chip if disabled to fix the problem.
Warn the user that the data it reports may be unusable, similar to other
drivers for chips from Nuvoton.

Fixes: 41082d66bf ("hwmon: Driver for NCT6683D")
Reported-by: Jonathan Sims <jonathan.625266@earthlink.net>
Tested-by: Jonathan Sims <jonathan.625266@earthlink.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
 2018-04-23 06:12:26 -07:00
Sudeep Holla
f18a36cf3f hwmon: (scmi) handle absence of few types of sensors 
Currently the loop checks for non-zero count of sensors for each type
of sensors which is completely wrong. It also results in aborting the
registration of sensors if one or more types of sensors are completely
not supported by the platform SCMI firmware.

This patch fixes the issue by continue to loop and skiping sensor types
that are not present.

Fixes: b23688aefb ("hwmon: add support for sensors exported via ARM SCMI")
Reported-by: Jim Quinlan <james.quinlan@broadcom.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
 2018-04-22 19:39:55 -07:00
Andrey Gusakov
ed645cccc0 hwmon: MC13783: Add uid and die temperature sensor inputs 
The uid and die temperature can be read out on the ADIN7 using
input mux. Map uid and die temperature sensor to channels 16
and 17.

Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
 2018-04-16 13:01:36 +01:00
Linus Torvalds
71219b3494 hwmon updates for v4.17 
- Added chip support: new centaur CPUs, ADM1272, NCT6796D
 - ucd9000: added debugfs attributes, gpio support
 - Cleanup and minor bug fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJay6EdAAoJEMsfJm/On5mBFtAP/jNsoEEjfibtIl7UN0cZm1Ec
 f5awcKr0WM4BTYxiBDJkM4KrugODOsOVlfQQakulmarsF4gKBpH8I5XKRGc2Wny/
 DMD/nPsu6laLoFwaIhIiOlwerc7ppQHOe9OlwbBvVRptG8t710479JC68O1XDpqu
 tP/C5+QlmIOs+HXgDXBE96xjPxfi1emYxvgzIH/Q2nf0Sd1GKQVYlbIF94xeZBDg
 cp1Sv7XeoWxsb4QwUWL3YbwCc8kABgVHmjogZsyFd6fyIRM8bi+RJGIheawhT7xr
 iaQ2iihW1nvdPHLAssqEG5KaJGpHobcrRm1Wy/lCWfiiLI+ortl5Xn4b9fZCmM+W
 zKK1QhAKoe26QdsrHBdgjprldpmlfUz+wnkFILu3dQfvDugo75t3B9W62faoqsvh
 CqRxLwolFf+2yOepmB9uXXuv+9vf41P2HP1axhlkJkcQVRby+f52va9btgi5z64a
 56OWzCqY5ESWnC+8Tm/w7rf5w28iWXAKmi0+GqIBDJn0jsTw+MfERa2ruR5omeTh
 Eo0FkwzcgGmshhkk/q+ffNooqEvV5Ry4CSq7dgxNTB8Ri65zxW7Hnhp8yb9WN+MP
 LMC0WSjZ/y6CPi2lNU96bakdT+LPB/HFEYTTEEsDSFGbrDkcHQn6cVgwGbDZYlgw
 DPDhuJAgyQJCvce7TFCu
 =M6YK
 -----END PGP SIGNATURE-----

Merge tag 'hwmon-for-linus-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:

 - added chip support: new Centaur CPUs, ADM1272, NCT6796D

 - ucd9000: added debugfs attributes, gpio support

 - cleanup and minor bug fixes

* tag 'hwmon-for-linus-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (via-cputemp) support new centaur CPUs
  hwmon: (nct6775) Fix writing pwmX_mode
  hwmon: (lm92) Add max6635 to lm92_id[]
  hwmon: (pmbus/adm1275) Add support for ADM1272
  hwmon: (lm92) Do not try to detect MAX6635
  hwmon: (ucd9000) Add debugfs attributes to provide mfr_status
  hwmon: (ucd9000) Add gpio chip interface
  hwmon: (nct6775) Add support for NCT6796D
  hwmon: (nct6775) Initialize boolean variables with declaration
  hwmon: (nct6775) Improve fan6/pwm6 support
  hwmon: (nct6775) Use NUM_FAN consistently
  hwmon: (g762) handle cleanup with devm_add_action
  hwmon: (sht3x) Update data sheet URL
  hwmon: (sht21) Update data sheet URLs
  hwmon: (pmbus/adm1275) Accept negative page register values
  hwmon: (pmbus/max8688) Accept negative page register values
 2018-04-09 19:59:54 -07:00
davidwang
e3a2d2be51 hwmon: (via-cputemp) support new centaur CPUs 
New centaur CPUs (Familiy == 7) also support this cpu temperature sensor.

Signed-off-by: David Wang <davidwang@zhaoxin.com>
[groeck: Dropped changelog, updated subject]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
 2018-03-30 07:53:57 -07:00
Guenter Roeck
415eb2a1aa hwmon: (nct6775) Fix writing pwmX_mode 
pwmX_mode is defined in the ABI as 0=DC mode, 1=pwm mode. The chip
register bit is set to 1 for DC mode. This got mixed up, and writing
1 into pwmX_mode resulted in DC mode enabled. Fix it up by using
the ABI definition throughout the driver for consistency.

Fixes: 77eb5b3703 ("hwmon: (nct6775) Add support for pwm, pwm_mode, ... ")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
 2018-03-27 08:49:24 -07:00
Arnd Bergmann
f8d6dc78b8 ARM SCMI fixes/cleanups for v4.17 
Couple of fixes for build warning due to uninitialised variable
 and static checker warning for passing NULL pointer to PTR_ERR.
 It also contains cleanup suggested by Stephen Boyd in SCMI clock
 driver using the new devm_of_clk_add_hw_provider() API.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJasTqmAAoJEABBurwxfuKYoJEP/Reu05gZud5fcIwGId0GK3a+
 AuIqTNXmDSVTU8fOv78Pv7OgYGBmAYTuBIJ/ji3ox/wFpjhb1JrZDA/o6WLJuPsN
 EEt562TMNUN0bfZx4E+heUpqXpOdFchgjP6+OsOeLWk1JXK3AvTTY2z/hbwgaw5H
 gey4+oayxof47OH5UNOlbdbjzOLuGZGPlnEWlbxppm28+QHENRITdzogYDkkHJiQ
 IGa+fLMErXcmeNKYsorKH+OejEfVoe+K8lvo1s1YDAMYCAkHibu7d62ryf/cFW7H
 uj6yKLWXa92TEwqcSNIV0IM+xlX8e2kpeNuVbpTxXU1yYWLaEIVV5022VFCv7Z0G
 jR53V98sYfThmKVM/vJjr2AkSWhM6DmlUx15WvrnthRtHOcW3uUxnrMk84EDCntg
 eUX9Z7xevmdDz5k8uq6DYAvoImPrKU+yscJiAVBA0CZg8fi5cqAms7XGgY9dPzTD
 B4VIm8a4cmGMXpShZI2T/qKpJbPahKi4U9Yf134FAEuBufQ7oIFERwzzu039PQ5e
 0ZqLyFx7ZOnxr+cfpQKRTHFJBPRLSRAW5yI2Qh8szmZAcMzgcbsho9tvSsUer8GQ
 qYnXiX7IPJb9wcc0/dyku0oHEz8vIx/t2YqJzOfBKfYZSv2L8EdFkD1jRUU3B8K/
 BX0TAFjb7/6Y/CvUZIE4
 =Gvhw
 -----END PGP SIGNATURE-----

Merge tag 'scmi-fixes-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/drivers

Pull "ARM SCMI fixes/cleanups for v4.17" from Sudeep Holla:

Couple of fixes for build warning due to uninitialised variable
and static checker warning for passing NULL pointer to PTR_ERR.
It also contains cleanup suggested by Stephen Boyd in SCMI clock
driver using the new devm_of_clk_add_hw_provider() API.

* tag 'scmi-fixes-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  clk: scmi: use devm_of_clk_add_hw_provider() API and drop scmi_clocks_remove
  firmware: arm_scmi: prevent accessing rate_discrete uninitialized
  hwmon: (scmi) return -EINVAL when sensor information is unavailable
 2018-03-27 15:57:19 +02:00
Alvaro G. M
10ecacd794 hwmon: (lm92) Add max6635 to lm92_id[] 
Since autodetection of this chip was removed, it makes sense to add prefix
max6635 so that the device can be instantiated by its actual name.

Signed-off-by: Alvaro Gamez Machado <alvaro.gamez@hazent.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
 2018-03-22 09:33:24 -07:00
Guenter Roeck
4ff0ce227a hwmon: (pmbus/adm1275) Add support for ADM1272 
The chip is quite similar to other chips in the series,
but as usual it comes with its own quirks.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
 2018-03-22 09:32:17 -07:00
Alvaro G. M
05993e226a hwmon: (lm92) Do not try to detect MAX6635 
Maxim MAX663x family are mostly compatible with LM92, but they lack any
identification register. Weakening the detect function would make it prone
to false positives, and current one doesn't detect all chips.  Therefore,
the detect function for max6635 devices is removed in favor of explicit
device instatiation.

Signed-off-by: Alvaro Gamez Machado <alvaro.gamez@hazent.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
 2018-03-22 09:32:05 -07:00
Sudeep Holla
c09880cef7 hwmon: (scmi) return -EINVAL when sensor information is unavailable 
Passing NULL pointer to PTR_ERR will result in return value of 0
indicating success which is clearly not what it is intended here.

This patch returns -EINVAL instead when the sensor information is not
available.

Fixes: b23688aefb ("hwmon: add support for sensors exported via ARM SCMI")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
 2018-03-20 12:13:48 +00:00
Christopher Bostic
72816cb06e hwmon: (ucd9000) Add debugfs attributes to provide mfr_status 
Expose the gpiN_fault fields of mfr_status as individual debugfs
attributes. This provides a way for users to be easily notified of gpi
faults. Also provide the whole mfr_status register in debugfs.

Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Eddie James <eajames@linux.vnet.ibm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
 2018-03-16 18:52:35 -07:00
Christopher Bostic
ca781fb7fd hwmon: (ucd9000) Add gpio chip interface 
Add a struct gpio_chip and define some methods so that this device's
I/O can be accessed via /sys/class/gpio.

Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Eddie James <eajames@linux.vnet.ibm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
 2018-03-16 18:52:04 -07:00
Guenter Roeck
81820059a4 hwmon: (nct6775) Add support for NCT6796D 
NCT6796D is mostly compatible to NCT6795D. It supports an additional
pwm control and fan speed channel.

While we are at it, update documentation for NCT6795D.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
 2018-03-10 19:00:14 -08:00
Guenter Roeck
1b20624090 hwmon: (nct6775) Initialize boolean variables with declaration 
Initialize boolean flags in nct6775_check_fan_inputs() while
declaring them instead of several times throughout the code.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
 2018-03-10 19:00:14 -08:00
Guenter Roeck
00fd4cfe5b hwmon: (nct6775) Improve fan6/pwm6 support 
Improve fan6/pwm6 detection on NCT6795D. Add support for fan pulses
for fans 4..6 and fan min limits for fan6.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
 2018-03-10 19:00:14 -08:00
Guenter Roeck
e2617262f1 hwmon: (nct6775) Use NUM_FAN consistently 
The size of some of the arrays using the number of fans is hardcoded.
Use NUM_FAN consistently throughout the driver.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
 2018-03-10 19:00:14 -08:00
Hao Peng
47591baa71 hwmon: (g762) handle cleanup with devm_add_action 
Simplify code and use devm_add_action() to handle cleanup.

Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
[groeck: Dropped unnecessary dummy function and NULL check]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
 2018-03-10 19:00:14 -08:00
Danilo Bargen
8e1d6fe961 hwmon: (sht21) Update data sheet URLs 
The previously used URLs are dead.

Sensirion provides permalinks for their product datasheets at
https://www.sensirion.com/en/about-us/links/.

Signed-off-by: Danilo Bargen <mail@dbrgn.ch>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
 2018-03-10 19:00:14 -08:00
Guenter Roeck
ecb29abd4c hwmon: (pmbus/adm1275) Accept negative page register values 
A negative page register value means that no page needs to be
selected. This is used by status register read operations and needs
to be accepted. The failure to do so so results in missed status
and limit registers.

Fixes: da8e48ab48 ("hwmon: (pmbus) Always call _pmbus_read_byte in core driver")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
 2018-03-10 18:59:56 -08:00
Guenter Roeck
a46f8cd696 hwmon: (pmbus/max8688) Accept negative page register values 
A negative page register value means that no page needs to be
selected. This is used by status register evaluations and needs
to be accepted.

Fixes: da8e48ab48 ("hwmon: (pmbus) Always call _pmbus_read_byte in core driver")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
 2018-03-10 18:59:47 -08:00
Arnd Bergmann
f46f11dc1e ARM SCMI support for v4.17 
ARM System Control and Management Interface(SCMI)[1] is more flexible and
 easily extensible than any of the existing interfaces.
 
 Few existing as well as future ARM platforms provide micro-controllers
 to abstract various power and other system management tasks which have
 similar interfaces, both in terms of the functions that are provided by
 them, and in terms of how requests are communicated to them.
 
 There are quite a few protocols like ARM SCPI, TI SCI, QCOM RPM, Nvidia Tegra
 BPMP, and so on already. This specification is to standardize and avoid any
 further fragmentation in the design of such interface by various vendors.
 
 The current SCMI driver implementation is very basic and initial support.
 It lacks support for notifications, asynchronous/delayed response, perf/power
 statistics region and sensor register region.
 
 Mailbox is the only form of transport supported currently in the driver.
 SCMI supports interrupt based mailbox communication, where, on completion
 of the processing of a message, the caller receives an interrupt as well as
 polling for completion.
 
 SCMI is designed to minimize the dependency on the mailbox/transport
 hardware. So in terms of SCMI, each channel in the mailbox includes
 memory area, doorbell and completion interrupt.
 
 However the doorbell and completion interrupt is highly mailbox dependent
 which was bit of controversial as part of SCMI/mailbox discussions.
 
 Arnd and me discussed about the few aspects of SCMI and the mailbox framework:
 
 1. Use of mailbox framework for doorbell type mailbox controller:
    - Such hardware may not require any data to be sent to signal the remote
      about the presence of a message. The channel will have in-built
      information on how to trigger the signal to the remote.
      There are few mailbox controller drivers which are purely doorbell based.
      e.g.QCOM IPC, STM, Tegra, ACPI PCC,..etc
 
 2. Supporting other mailbox controller:
    - SCMI just needs a mechanism to signal the remote firmware. Such
      controller may need fixed message to be sent to trigger a doorbell.
      In such case we may need to get that data from DT and pass the same
      to the controller. It's not covered in the current DT binding, but
      can be extended as optional property in future.
 
      However handling notifications may be interesting on such mailbox, but
      again there is no way to interpret what the data field(remote message)
      means, it could be a bit mask or a number or don't-care.
 
 Arnd mentioned that he doesn't like the way the mailbox binding deals
 with doorbell-type hardware, but we do have quite a few precedent drivers
 already and changing the binding to add a data field would not make it any
 better, but could cause other problems. So he is happy with the status quo
 of SCMI implementation.
 
 [1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.den0056a/index.html
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJalvXJAAoJEABBurwxfuKYUHoQANi5gm0vGgRhb8/Cc6BHF9ij
 WVge3E2O+Ygg2qTKJJxWvwG3w09Pu9Pugwoa7vuisDNz4ihF+3WEYCZiwrbQhMOQ
 8ZyxXwdBu4Kp0fnNAGGq0MWllwspVgdC2Be5jviDTMw7H8ZIQEiKjxPkdSFY1xFj
 YAtTzuUeDcuztUb3IliOpLscxNUqGEQr4p/xj0VFu+1XSwtYo/9bDU7haiYNj0MD
 zbNv9WhyjUHTTsdQjDW4YGywQpFPu/oI8oSR5q+Q3mudccaZYbvvTwKDRACLVkr4
 rpeymFdGSEU8OI23pKql4eEZ2DC1VKuVnG9peTr9UhhuRL8jQKqFLeCYH0fGcY89
 VGWDIFBjyUg1NK7giCriqCq4m68UM49ChITXY6zRrIvyONgUZj6p6kTmCHC3TULH
 LWfu9lf7XqI5/AqZaXhHsDPL2Arf0u5K7rP6yaU0BgdQ2HRKV8rIT3KadjsOioAw
 bIDfpi4eInmq41CUy1gsWP6nIRg4qR4sZiWC2CW8ap0gbHq8a7PVuuRi4VDCZIkN
 CfntuDAnE+FMq/cMpgLRGteNbl0MVAeAeJfEGNyk5ahhYZtvnAy142zDpBmvWZth
 ZuZvb7mwiNPiZTC65B/DFDdSCKZtD+LVCodzcm2Pkx6zgW0SC6pje+mX0+zpDxZ9
 A9Eguiun1hInKX3URD1D
 =qOck
 -----END PGP SIGNATURE-----

Merge tag 'scmi-updates-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/drivers

Pull "ARM SCMI support for v4.17" from Sudeep Holla:

ARM System Control and Management Interface(SCMI)[1] is more flexible and
easily extensible than any of the existing interfaces.

Few existing as well as future ARM platforms provide micro-controllers
to abstract various power and other system management tasks which have
similar interfaces, both in terms of the functions that are provided by
them, and in terms of how requests are communicated to them.

There are quite a few protocols like ARM SCPI, TI SCI, QCOM RPM, Nvidia Tegra
BPMP, and so on already. This specification is to standardize and avoid any
further fragmentation in the design of such interface by various vendors.

The current SCMI driver implementation is very basic and initial support.
It lacks support for notifications, asynchronous/delayed response, perf/power
statistics region and sensor register region.

Mailbox is the only form of transport supported currently in the driver.
SCMI supports interrupt based mailbox communication, where, on completion
of the processing of a message, the caller receives an interrupt as well as
polling for completion.

SCMI is designed to minimize the dependency on the mailbox/transport
hardware. So in terms of SCMI, each channel in the mailbox includes
memory area, doorbell and completion interrupt.

However the doorbell and completion interrupt is highly mailbox dependent
which was bit of controversial as part of SCMI/mailbox discussions.

Arnd and me discussed about the few aspects of SCMI and the mailbox framework:

1. Use of mailbox framework for doorbell type mailbox controller:
   - Such hardware may not require any data to be sent to signal the remote
     about the presence of a message. The channel will have in-built
     information on how to trigger the signal to the remote.
     There are few mailbox controller drivers which are purely doorbell based.
     e.g.QCOM IPC, STM, Tegra, ACPI PCC,..etc

2. Supporting other mailbox controller:
   - SCMI just needs a mechanism to signal the remote firmware. Such
     controller may need fixed message to be sent to trigger a doorbell.
     In such case we may need to get that data from DT and pass the same
     to the controller. It's not covered in the current DT binding, but
     can be extended as optional property in future.

     However handling notifications may be interesting on such mailbox, but
     again there is no way to interpret what the data field(remote message)
     means, it could be a bit mask or a number or don't-care.

Arnd mentioned that he doesn't like the way the mailbox binding deals
with doorbell-type hardware, but we do have quite a few precedent drivers
already and changing the binding to add a data field would not make it any
better, but could cause other problems. So he is happy with the status quo
of SCMI implementation.

[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.den0056a/index.html

* tag 'scmi-updates-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  cpufreq: scmi: add support for fast frequency switching
  cpufreq: add support for CPU DVFS based on SCMI message protocol
  hwmon: add support for sensors exported via ARM SCMI
  hwmon: (core) Add hwmon_max to hwmon_sensor_types enumeration
  clk: add support for clocks provided by SCMI
  firmware: arm_scmi: add device power domain support using genpd
  firmware: arm_scmi: add per-protocol channels support using idr objects
  firmware: arm_scmi: refactor in preparation to support per-protocol channels
  firmware: arm_scmi: add option for polling based performance domain operations
  firmware: arm_scmi: add support for polling based SCMI transfers
  firmware: arm_scmi: probe and initialise all the supported protocols
  firmware: arm_scmi: add initial support for sensor protocol
  firmware: arm_scmi: add initial support for power protocol
  firmware: arm_scmi: add initial support for clock protocol
  firmware: arm_scmi: add initial support for performance protocol
  firmware: arm_scmi: add scmi protocol bus to enumerate protocol devices
  firmware: arm_scmi: add common infrastructure and support for base protocol
  firmware: arm_scmi: add basic driver infrastructure for SCMI
  dt-bindings: arm: add support for ARM System Control and Management Interface(SCMI) protocol
  dt-bindings: mailbox: add support for mailbox client shared memory
 2018-03-07 16:45:07 +01:00
Sudeep Holla
b23688aefb hwmon: add support for sensors exported via ARM SCMI 
Create a driver to add support for SoC sensors exported by the System
Control Processor (SCP) via the System Control and Management Interface
(SCMI). The supported sensor types is one of voltage, temperature,
current, and power.

The sensor labels and values provided by the SCP are exported via the
hwmon sysfs interface.

Cc: linux-hwmon@vger.kernel.org
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
 2018-02-28 16:37:57 +00:00
Linus Torvalds
3e9f4df0ea Fix bad temperature display on Ryzen/Threadripper 
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJahgQ1AAoJEMsfJm/On5mBNfgQAJgCjg4gatr0U2pqd40IPtwS
 V/KrAfLtt9+zv6HSdW1zc1vUKb3mAvi9roVIX6i4nuSjS9eitPRyvcSN+UW9X01t
 r8jqwtStssaXEKLzRkEGBoACy7/A0fNCcjHMOj1EPftKIOZdfGnZ6r4cI+/wGyLR
 ybBjcvfMNkLGgJbRKy/2Acib/Jp9OoJpjLMVyIFnhRGgRmvYKSDu7rK6ecmW2KSG
 mgKyzxL29PLfWu8jVwnkXfZcdG97akEv90BfUUa16KXA3+hgvscM5+7jQmap4N3p
 nh3yLc7MyTXvfOhKauer4czTwbr3JoDZ+BZ38a1qoD+cPX6e5GkGJnFR1E0NBG/p
 7m2w1u7LVhab5t7NFA8JgKB8J8PfyGVCiHfF0szil6lA0LiRVN/rgMcAEIavIO7K
 7C5OBjVYWk0PeJULU66r81kILvZMtc6xh6XC2gc8Z+t6uu4Ld4FSUsIWL6Muu0l6
 i2h8WX5HSMjSqCylPBTRD0a/hvPuQjWE0fkLoAtgPCt112Je6xitJzZM+RPDKonV
 8+zG1NM9eePnSNt3TsdMeF6HOR9fR9n7E3D0xsM2cbHXa1BOwlVCkPYYqNA6QkaM
 ZKTRKysZn3fYfMT0fVfdZ7E0ODZPpY/gwdqE4bduH9pMksqO0E2/g9PX/JQV13bN
 IwpMFO9aHMqVc+U8Xwhu
 =kHhI
 -----END PGP SIGNATURE-----

Merge tag 'hwmon-for-linus-v4.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fix from Guenter Roeck:
 "Fix bad temperature display on Ryzen/Threadripper"

* tag 'hwmon-for-linus-v4.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (k10temp) Only apply temperature offset if result is positive
 2018-02-15 14:31:28 -08:00
Linus Torvalds
d4667ca142 Merge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 
Pull x86 PTI and Spectre related fixes and updates from Ingo Molnar:
 "Here's the latest set of Spectre and PTI related fixes and updates:

  Spectre:
   - Add entry code register clearing to reduce the Spectre attack
     surface
   - Update the Spectre microcode blacklist
   - Inline the KVM Spectre helpers to get close to v4.14 performance
     again.
   - Fix indirect_branch_prediction_barrier()
   - Fix/improve Spectre related kernel messages
   - Fix array_index_nospec_mask() asm constraint
   - KVM: fix two MSR handling bugs

  PTI:
   - Fix a paranoid entry PTI CR3 handling bug
   - Fix comments

  objtool:
   - Fix paranoid_entry() frame pointer warning
   - Annotate WARN()-related UD2 as reachable
   - Various fixes
   - Add Add Peter Zijlstra as objtool co-maintainer

  Misc:
   - Various x86 entry code self-test fixes
   - Improve/simplify entry code stack frame generation and handling
     after recent heavy-handed PTI and Spectre changes. (There's two
     more WIP improvements expected here.)
   - Type fix for cache entries

  There's also some low risk non-fix changes I've included in this
  branch to reduce backporting conflicts:

   - rename a confusing x86_cpu field name
   - de-obfuscate the naming of single-TLB flushing primitives"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
  x86/entry/64: Fix CR3 restore in paranoid_exit()
  x86/cpu: Change type of x86_cache_size variable to unsigned int
  x86/spectre: Fix an error message
  x86/cpu: Rename cpu_data.x86_mask to cpu_data.x86_stepping
  selftests/x86/mpx: Fix incorrect bounds with old _sigfault
  x86/mm: Rename flush_tlb_single() and flush_tlb_one() to __flush_tlb_one_[user|kernel]()
  x86/speculation: Add <asm/msr-index.h> dependency
  nospec: Move array_index_nospec() parameter checking into separate macro
  x86/speculation: Fix up array_index_nospec_mask() asm constraint
  x86/debug: Use UD2 for WARN()
  x86/debug, objtool: Annotate WARN()-related UD2 as reachable
  objtool: Fix segfault in ignore_unreachable_insn()
  selftests/x86: Disable tests requiring 32-bit support on pure 64-bit systems
  selftests/x86: Do not rely on "int $0x80" in single_step_syscall.c
  selftests/x86: Do not rely on "int $0x80" in test_mremap_vdso.c
  selftests/x86: Fix build bug caused by the 5lvl test which has been moved to the VM directory
  selftests/x86/pkeys: Remove unused functions
  selftests/x86: Clean up and document sscanf() usage
  selftests/x86: Fix vDSO selftest segfault for vsyscall=none
  x86/entry/64: Remove the unused 'icebp' macro
  ...
 2018-02-14 17:02:15 -08:00
Jia Zhang
b399151cb4 x86/cpu: Rename cpu_data.x86_mask to cpu_data.x86_stepping 
x86_mask is a confusing name which is hard to associate with the
processor's stepping.

Additionally, correct an indent issue in lib/cpu.c.

Signed-off-by: Jia Zhang <qianyue.zj@alibaba-inc.com>
[ Updated it to more recent kernels. ]
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@alien8.de
Cc: tony.luck@intel.com
Link: http://lkml.kernel.org/r/1514771530-70829-1-git-send-email-qianyue.zj@alibaba-inc.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
 2018-02-15 01:15:52 +01:00
Guenter Roeck
aef17ca127 hwmon: (k10temp) Only apply temperature offset if result is positive 
A user reports a really bad temperature on Ryzen 1950X.

k10temp-pci-00cb
Adapter: PCI adapter
temp1: +4294948.3°C (high = +70.0°C)

This will happen if the temperature reported by the chip is lower than
the offset temperature. This has been seen in the field if "Sense MI Skew"
and/or "Sense MI Offset" BIOS parameters were set to unexpected values.
Let's report a temperature of 0 degrees C in that case.

Fixes: 1b50b77635 ("hwmon: (k10temp) Add support for temperature offsets")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
 2018-02-12 14:23:29 -08:00
Oleksandr Natalenko
6fbc4232a5 hwmon: (dell-smm) Disable fan support for Dell Vostro 3360 
Calling fan related SMM functions implemented by Dell BIOS firmware on Dell
Vostro 3360 freeze kernel for about 500ms.

Unfortunately, it is unlikely for Dell to fix this since the machine
is pretty old, so this commit just disables fan support to make the
system usable again.

Via "force" module param fan support can be enabled.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=195751
Link: http://lkml.iu.edu/hypermail/linux/kernel/1711.2/06083.html
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
 2018-01-27 09:34:22 -08:00
Pali Rohár
f480ea90b9 hwmon: (dell-smm) Disable fan support for Dell Inspiron 7720 
Calling fan related SMM functions implemented by Dell BIOS firmware on Dell
Inspiron 7720 freeze kernel for about 500ms. Until Dell fixes it we need to
disable fan support for Dell Inspiron 7720 as it makes system unusable.

Via "force" module param fan support can be enabled.

Reported-by: vova7890@mail.ru
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=195751
Cc: stable@vger.kernel.org # v4.0+, will need backport
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
 2018-01-27 09:34:03 -08:00