nfs4_open_recover_helper clears opendata->o_res
before calling nfs4_init_opendata_res, thus causing
NFSv4.0 OPEN operations to be sent rather than nfsv4.1.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Unless I'm mistaken, NFS_INO_INVALID_ACL is being checked twice during
getacl calls (i.e. first via nfs_revalidate_inode() and then by each all
site).
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Specifying "port=-5" with the kernel's current mount option parser
generates "unrecognized mount option". If "sloppy" is set, this
causes the mount to succeed and use the default values; the desired
behavior is that, since this is a valid option with an invalid value,
the mount should fail, even with "sloppy."
To properly handle "sloppy" parsing, we need to distinguish between
correct options with invalid values, and incorrect options. We will
need to parse integer values by hand, therefore, and not rely on
match_token().
For instance, these must all fail with "invalid value":
port=12345678
port=-5
port=samuel
and not with "unrecognized option," as they do currently.
Thus, for the sake of match_token() we need to treat the values for
these options as strings, and do the conversion to integers using
strict_strtol().
This is basically the same solution we used for the earlier "retry="
fix (commit ecbb3845), except in this case the kernel actually has to
parse the value, rather than ignore it.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Ian Kent reports:
"I've noticed a couple of other regressions with the options vers
and proto option of mount.nfs(8).
The commands:
mount -t nfs -o vers=<invalid version> <server>:/<path> /<mountpoint>
mount -t nfs -o proto=<invalid proto> <server>:/<path> /<mountpoint>
both immediately fail.
But if the "-s" option is also used they both succeed with the
mount falling back to defaults (by the look of it).
In the past these failed even when the sloppy option was given, as
I think they should. I believe the sloppy option is meant to allow
the mount command to still function for mount options (for example
in shared autofs maps) that exist on other Unix implementations but
aren't present in the Linux mount.nfs(8). So, an invalid value
specified for a known mount option is different to an unknown mount
option and should fail appropriately."
See RH bugzilla 486266.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: Remove xdr_decode_fhstatus() and xdr_decode_fhstatus3(), now
that they are unused.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Solder xdr_stream-based XDR decoding functions into the in-kernel mountd
client that are more careful about checking data types and watching for
buffer overflows. The new MNT3 decoder includes support for auth-flavor
list decoding.
The "_sz" macro for MNT3 replies was missing the size of the file handle.
I've added this back, and included the size of the auth flavor array.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Introduce an xdr_stream-based XDR decoder that can unpack the auth-
flavor list returned in a MNT3 reply.
The nfs_mount() function's caller allocates an array, and passes the
size and a pointer to it. The decoder decodes all the flavors it can
into the array, and returns the number of decoded flavors.
If the caller is not interested in the auth flavors, it can pass a
value of zero as the size of the pre-allocated array.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Introduce xdr_stream-based XDR file handle decoders to the in-kernel
mountd client. These are more careful than the existing decoder
functions about buffer overflows and data type and range checking.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Introduce data structures and xdr_stream-based decoding functions for
unmarshalling mountd status codes properly.
Mountd version 3 uses specific standard error return codes that are
not errno values and not NFS3ERR_ values. These have a well-defined
standard mapping to local errno values. Introduce data structures
and a decoder function that map these status codes to local errno
values properly. This is new functionality (but not used yet).
Version 1 mountd status values are defined by RFC 1094 as UNIX error
values (errno values). Errno values on heterogeneous systems do not
necessarily match each other. To avoid exposing possibly incorrect
errno values to upper layers, the current XDR decoder converts all
non-zero MNT version 1 status codes to -EACCES.
The OpenGroup XNFS standard provides a mapping similar to but smaller
than the version 3 error codes. Implement a decoder that uses the XNFS
error codes, replacing the current decoder.
For both mountd protocol versions, map unrecognized errors to -EACCES.
Finally we introduce a replacement data structure for mnt_fhstatus
at this time, which is used by the new XDR decoders. In addition to
documenting that the status value returned by the XDR decoders is
always an errno, this new structure will be expanded in subsequent
patches.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: remove xdr_encode_dirpath() now that it has been replaced.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Check the length of the supplied dirpath, and see that it fits
properly in the RPC buffer.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: Relocate MNT program procedure number definitions to the
only file that uses them. Relocate the version number definitions,
which are shared, to nfs.h. Remove duplicate program number
definitions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cut NSM upcall RPC traffic in half -- don't do a NULL call first.
The cases where a ping would be helpful are rare.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
When rpc.statd starts up in user space at boot time, it attempts to
write the latest NSM local state number into
/proc/sys/fs/nfs/nsm_local_state.
If lockd.ko isn't loaded yet (as is the case in most configurations),
that file doesn't exist, thus the kernel's NSM state remains set to
its initial value of zero during lockd operation.
This is a problem because rpc.statd and lockd use the NSM state number
to prevent repeated lock recovery on rebooted hosts. If lockd sends
a zero NSM state, but then a delayed SM_NOTIFY with a real NSM state
number is received, there is no way for lockd or rpc.statd to
distinguish that stale SM_NOTIFY from an actual reboot. Thus lock
recovery could be performed after the rebooted host has already
started reclaiming locks, and those locks will be lost.
We could change /etc/init.d/nfslock so it always modprobes lockd.ko
before starting rpc.statd. However, if lockd.ko is ever unloaded
and reloaded, we are back at square one, since the NSM state is not
preserved across an unload/reload cycle. This may happen frequently
on clients that use automounter. A period of NFS inactivity causes
lockd.ko to be unloaded, and the kernel loses its NSM state setting.
Instead, let's use the fact that rpc.statd plants the local system's
NSM state in every SM_MON (and SM_UNMON) reply. lockd performs a
synchronous SM_MON upcall to the local rpc.statd _before_ sending its
first NLM request to a new remote. This would permit rpc.statd to
provide the current NSM state to lockd, even after lockd.ko had been
unloaded and reloaded.
Note that NLMPROC_LOCK arguments are constructed before the
nsm_monitor() call, so we have to rearrange argument construction very
slightly to make this all work out.
And, the kernel appears to treat NSM state as a u32 (see struct
nlm_args and nsm_res). Make nsm_local_state a u32 as well, to ensure
we don't get bogus comparison results.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clear "ret" if the error return from svc_create_xprt(AF_INET6) was
-EAFNOSUPORT. Otherwise, callback start-up will succeed, but
nfs_callback_up() will return -EAFNOSUPPORT anyway, and the first
NFSv4 mount attempt after a reboot will fail.
Bug introduced by commit f738f517 in 2.6.30-rc1.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the kernel cannot start the NFSv4 callback service during a mount
request, it returns -ENOMEM to user space, resulting in this message:
mount.nfs4: Cannot allocate memory
Adjust nfs_alloc_client() and nfs_get_client() to pass NFSv4 callback
start-up errors back to user space so a less mysterious error message
can be displayed by the mount command.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The "intr" mount option has been deprecated for a while, but
/proc/mounts continues to display "nointr" whether "intr" or "nointr"
has been specified for a mount point.
Since these options do not have any effect, simply do not display
them.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Adds support for splice writes. It effectively calls
generic_file_splice_write() to do the writes.
We need not worry about O_APPEND case as the combination of splice()
writes and O_APPEND is disallowed. This patch propagates NFS write
errors back to the caller. The number of bytes written via splice are
being added to NFSIO_NORMALWRITTENBYTES as these are effectively
cached writes.
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Validates the callback's sessionID, the slot number, and the sequence ID.
Increments the slot's sequence.
Detects replays, but simply prints a debug message (if debugging is enabled
since we don't yet implement a duplicate request cache for the backchannel.
This should not present a problem, since only idempotent callbacks are
currently implemented.
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: Backchannel: Be more obvious about the return value]
[nfs41: Backchannel: dprink in host order]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Finds the 'struct nfs_client' that matches the server's address, major
version number, and session ID.
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Defines a new 'struct nfs4_slot_table' in the 'struct nfs4_session'
for use by the backchannel. Initializes, resets, and destroys the backchannel
slot table in the same manner the forechannel slot table is initialized,
reset, and destroyed.
The sequenceid for each slot in the backchannel slot table is initialized
to 0, whereas the forechannel slotid's sequenceid is set to 1.
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Generalize nfs4_init_slot_table() so it can be used to initialize the
backchannel slot table in addition to the forechannel slot table.
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Generalize nfs4_reset_slot_table() so it can be used to reset the
backchannel slot table in addition to the forechannel slot table.
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Change the type of cs_addr and csr_status to 'struct sockaddr' and
'__be32' since the cb_sequence processing function will use existing
functionality that expects these types.
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
The 'rq_received' member of 'struct rpc_rqst' is used to track when we
have received a reply to our request. With v4.1, the backchannel
can now accept callback requests over the existing connection. Rename
this field to make it clear that it is only used for tracking reply bytes
and not all bytes received on the connection.
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
CB_SEQUENCE must appear first in the callback compound RPC.
If it is not the first operation NFS4ERR_SEQUENCE_POS must be returned.
If the first operation ni the CB_COMPOUND is not CB_SEQUENCE then
NFS4ERR_OP_NOT_IN_SESSION must be returned.
Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: refactor op preprocessing out of process_op]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: get rid of READMEM and COPYMEM for callback_xdr.c]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: get rid of READ64 in callback_xdr.c]
See http://linux-nfs.org/pipermail/pnfs/2009-June/007846.html
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Note that this patch changes the nfsv4.0 behavior also when
CONFIG_NFS_V4_1 is not defined where NFS4ERR_MINOR_VERS_MISMATCH
will be returned if the client received a CB_COMPOUND
with minorversion != 0. Previously, it would have
returned NFS4ERR_OP_ILLEGAL for CB_SEQUENCE.
(or if the server is broken and sent OP_CB_GETATTR or OP_CB_RECALL
with minorversion!=0, they would have been processed normally.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: refactor op preprocessing out of process_op]
See http://linux-nfs.org/pipermail/pnfs/2009-June/007845.html
[nfs41: define CB_NOTIFY_DEVICEID as not supported]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Frees the preallocated backchannel resources that are associated with
this session when the session is destroyed.
A backchannel is currently created once per session. Destroy the backchannel
only when the session is destroyed.
Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Obtain the rpc_xprt from the rpc_rqst so that calls and callback replies
can both use the same code path. A client needs the rpc_xprt in order
to reply to a callback.
Signed-off-by: Rahul Iyer <iyer@netapp.com>
Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Set the SESSION4_BACK_CHAN flag to indicate the client supports a backchannel.
Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
The NFS v4.1 callback service has already been setup, and
rpc_xprt->serv points to the svc_serv structure describing it.
Invoke the xprt_setup_backchannel() initialization to pre-
allocate the necessary backchannel structures.
Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: change nfs4_put_session(nfs4_session**) to nfs4_destroy_session(nfs_session*)]
Signed-off-by: Alexandros Batsakis <Alexandros.Batsakis@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[moved xprt_setup_backchannel from nfs4_init_session to nfs4_init_backchannel]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Tracks the nfs_callback_info for both versions, enabling the callback
service for v4 and v4.1 to run concurrently and be stopped independently
of each other.
Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
This svc_xprt is passed on to the callback service thread to be later used
to processes incoming svc_rqst's
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
For nfs41 callbacks we need an svc_xprt to process requests coming up the
backchannel socket as rpc_rqst's that are transformed into svc_rqst's that
need a rq_xprt to be processed.
The svc_{udp,tcp}_create methods are too heavy for this job as svc_create_socket
creates an actual socket to listen on while for nfs41 we're "reusing" the
fore channel's socket.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
nfs41_callback_up() initializes the necessary queues and creates the new
nfs41_callback_svc thread. This thread executes the callback service which
waits for requests to arrive on the svc_serv->sv_cb_list.
NFS41_BC_MIN_CALLBACKS is set to 1 because we expect callbacks to not
cause substantial latency.
The actual processing of the callback will be implemented as a separate patch.
There is only one NFSv4.1 callback service. The first caller of
nfs4_callback_up() creates the service, subsequent callers increment a
reference count on the service. The service is destroyed when the last
caller invokes nfs_callback_down().
The transport needs to hold a reference to the callback service in order
to invoke it during callback processing. Currently this reference is only
obtained when the service is first created. This is incorrect, since
subsequent registrations for other transports will leave the xprt->serv
pointer uninitialized, leading to an oops when a callback arrives on
the "unreferenced" transport.
This patch fixes the problem by ensuring that a reference to the service
is saved in xprt->serv, either because the service is created by this
invocation to nfs4_callback_up() or by a prior invocation.
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: Add a reference to svc_serv during callback service bring up]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[Type check arguments of nfs_callback_up]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: save svc_serv in nfs_callback_info]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[Removal of ugly #ifdefs]
[nfs41: Update to removal of ugly #ifdefs]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Implement the NFSv4.1 backchannel service. Invokes the common callback
processing logic svc_process_common() to authenticate the call and
dispatch the appropriate NFSv4.1 XDR decoder and operation procedure.
It then invokes bc_send() to send the reply over the same connection.
bc_send() is implemented in a separate patch.
At this time there is no slot validation or reply cache handling.
[nfs41: Preallocate rpc_rqst receive buffer for handling callbacks]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[Move bc_svc_process() declaration to correct patch]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
net/sunrpc/svc.c:svc_process() is used by the NFSv4 callback service
to process RPC requests arriving over connections initiated by the
server. NFSv4.1 supports callbacks over the backchannel on connections
initiated by the client. This patch refactors svc_process() so that
common code can also be used by the backchannel.
Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Executes the backchannel task on the RPC state machine using
the existing open connection previously established by the client.
Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
nfs41: Add bc_svc.o to sunrpc Makefile.
[nfs41: bc_send() does not need to be exported outside RPC module]
[nfs41: xprt_free_bc_request() need not be exported outside RPC module]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[Update copyright]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Adds rpc_run_bc_task() which is called by the NFS callback service to
process backchannel requests. It performs similar work to rpc_run_task()
though "schedules" the backchannel task to be executed starting at the
call_trasmit state in the RPC state machine.
It also introduces some miscellaneous updates to the argument validation,
call_transmit, and transport cleanup functions to take into account
that there are now forechannel and backchannel tasks.
Backchannel requests do not carry an RPC message structure, since the
payload has already been XDR encoded using the existing NFSv4 callback
mechanism.
Introduce a new transmit state for the client to reply on to backchannel
requests. This new state simply reserves the transport and issues the
reply. In case of a connection related error, disconnects the transport and
drops the reply. It requires the forechannel to re-establish the connection
and the server to retransmit the request, as stated in NFSv4.1 section
2.9.2 "Client and Server Transport Behavior".
Note: There is no need to loop attempting to reserve the transport. If EAGAIN
is returned by xprt_prepare_transmit(), return with tk_status == 0,
setting tk_action to call_bc_transmit. rpc_execute() will invoke it again
after the task is taken off the sleep queue.
[nfs41: rpc_run_bc_task() need not be exported outside RPC module]
[nfs41: New call_bc_transmit RPC state]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[nfs41: Backchannel: No need to loop in call_bc_transmit()]
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[rpc_count_iostats incorrectly exits early]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
[Convert rpc_reply_expected() to inline function]
[Remove unnecessary BUG_ON()]
[Rename variable]
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
