There are no more users of this function left in the XFS code
now that we've switched everything to delayed write flushing.
Remove it.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
When an inode has already be flushed delayed write,
xfs_inode_clean() returns true and hence xfs_fs_write_inode() can
return on a synchronous inode write without having written the
inode. Currently these sycnhronous writes only come sync(1),
unmount, a sycnhronous NFS export and cachefiles so should be
relatively rare and out of common performance paths.
Realistically, a synchronous inode write is not necessary here; we
can avoid writing the inode by logging any non-transactional changes
that are pending. This needs to be done with synchronous
transactions, but it avoids seeking between the log and inode
clusters as we do now. We don't force the log if the inode is
pinned, though, so this differs from the fsync case. For normal
sys_sync and unmount behaviour this is fine because we do a
synchronous log force in xfs_sync_data which is called from the
->sync_fs code.
It does however break the NFS synchronous export guarantees for now,
but work is under way to fix this at a higher level or for the
higher level to provide an additional flag in the writeback control
to tell us that a log force is needed.
Portions of this patch are based on work from Dave Chinner.
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Alex Elder <aelder@sgi.com>
We always need to flush the disk write cache and can't skip it just because
the no inode attributes have changed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
dquots are never flushed asynchronously. Remove the flag and the
async write support from the flush function. Make the default flush
a delwri flush to make the inode flush code, which leaves the
XFS_QMOPT_SYNC the only flag remaining. Convert that to use
SYNC_WAIT instead, just like the inode flush code.
V2:
- just pass flush flags straight through
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
xfs_qm_dqflock_pushbuf_wait() does a very similar trick to item
pushing used to do to flush out delayed write dquot buffers. Change
it to use the new promotion method rather than an async flush.
Also, xfs_qm_dqflock_pushbuf_wait() can return without the flush lock
held, yet the callers make the assumption that after this call the
flush lock is held. Always return with the flush lock held.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Currently when the xfsbufd writes delayed write buffers, it pushes
them to disk in the order they come off the delayed write list. If
there are lots of buffers ѕpread widely over the disk, this results
in overwhelming the elevator sort queues in the block layer and we
end up losing the posibility of merging adjacent buffers to minimise
the number of IOs.
Use the new generic list_sort function to sort the delwri dispatch
queue before issue to ensure that the buffers are pushed in the most
friendly order possible to the lower layers.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
All buffers logged into the AIL are marked as delayed write.
When the AIL needs to push the buffer out, it issues an async write of the
buffer. This means that IO patterns are dependent on the order of
buffers in the AIL.
Instead of flushing the buffer, promote the buffer in the delayed
write list so that the next time the xfsbufd is run the buffer will
be flushed by the xfsbufd. Return the state to the xfsaild that the
buffer was promoted so that the xfsaild knows that it needs to cause
the xfsbufd to run to flush the buffers that were promoted.
Using the xfsbufd for issuing the IO allows us to dispatch all
buffer IO from the one queue. This means that we can make much more
enlightened decisions on what order to flush buffers to disk as
we don't have multiple places issuing IO. Optimisations to xfsbufd
will be in a future patch.
Version 2
- kill XFS_ITEM_FLUSHING as it is now unused.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
We currently do background inode flush asynchronously, resulting in
inodes being written in whatever order the background writeback
issues them. Not only that, there are also blocking and non-blocking
asynchronous inode flushes, depending on where the flush comes from.
This patch completely removes asynchronous inode writeback. It
removes all the strange writeback modes and replaces them with
either a synchronous flush or a non-blocking delayed write flush.
That is, inode flushes will only issue IO directly if they are
synchronous, and background flushing may do nothing if the operation
would block (e.g. on a pinned inode or buffer lock).
Delayed write flushes will now result in the inode buffer sitting in
the delwri queue of the buffer cache to be flushed by either an AIL
push or by the xfsbufd timing out the buffer. This will allow
accumulation of dirty inode buffers in memory and allow optimisation
of inode cluster writeback at the xfsbufd level where we have much
greater queue depths than the block layer elevators. We will also
get adjacent inode cluster buffer IO merging for free when a later
patch in the series allows sorting of the delayed write buffers
before dispatch.
This effectively means that any inode that is written back by
background writeback will be seen as flush locked during AIL
pushing, and will result in the buffers being pushed from there.
This writeback path is currently non-optimal, but the next patch
in the series will fix that problem.
A side effect of this delayed write mechanism is that background
inode reclaim will no longer directly flush inodes, nor can it wait
on the flush lock. The result is that inode reclaim must leave the
inode in the reclaimable state until it is clean. Hence attempts to
reclaim a dirty inode in the background will simply skip the inode
until it is clean and this allows other mechanisms (i.e. xfsbufd) to
do more optimal writeback of the dirty buffers. As a result, the
inode reclaim code has been rewritten so that it no longer relies on
the ambiguous return values of xfs_iflush() to determine whether it
is safe to reclaim an inode.
Portions of this patch are derived from patches by Christoph
Hellwig.
Version 2:
- cleanup reclaim code as suggested by Christoph
- log background reclaim inode flush errors
- just pass sync flags to xfs_iflush
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
A.K.A.: don't rely on xfs_iflush() return value in reclaim
We have gradually been moving checks out of the reclaim code because
they are duplicated in xfs_iflush(). We've had a history of problems
in this area, and many of them stem from the overloading of the
return values from xfs_iflush() and interaction with inode flush
locking to determine if the inode is safe to reclaim.
With the desire to move to delayed write flushing of inodes and
non-blocking inode tree reclaim walks, the overloading of the
return value of xfs_iflush makes it very difficult to determine
the correct thing to do next.
This patch explicitly re-adds the checks to the inode reclaim code,
removing the reliance on the return value of xfs_iflush() to
determine what to do next. It also means that we can clearly
document all the inode states that reclaim must handle and hence
we can easily see that we handled all the necessary cases.
This also removes the need for the xfs_inode_clean() check in
xfs_iflush() as all callers now check this first (safely).
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
This mangles the reserved blocks counts a little more.
1) add a helper function for the default reserved count
2) add helper functions to save/restore counts on ro/rw
3) save/restore reserved blocks on freeze/thaw
4) disallow changing reserved count while readonly
V2: changed field name to match Dave's changes
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Alex Elder <aelder@sgi.com>
Because they cause warnings in static inline functions conditionally
compiled into XFS from the VFS (e.g. fsnotify).
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
If we hold onto reserved blocks when doing a remount,ro we end
up writing the blocks used count to disk that includes the reserved
blocks. Reserved blocks are not actually used, so this results in
the values in the superblock being incorrect.
Hence if we run xfs_check or xfs_repair -n while the filesystem is
mounted remount,ro we end up with an inconsistent filesystem being
reported. Also, running xfs_copy on the remount,ro filesystem will
result in an inconsistent image being generated.
To fix this, unreserve the blocks when doing the remount,ro, and
reserved them again on remount,rw. This way a remount,ro filesystem
will appear consistent on disk to all utilities.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
A "df" run on an NFS client of an exported XFS file system reports
the wrong information for "available" blocks. When a block quota is
enforced, the amount reported as free is limited by the quota, but
the amount reported available is not (and should be).
Reported-by: Guk-Bong, Kwon <gbkwon@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
We use the KM_LARGE flag to make kmem_alloc and friends use vmalloc
if necessary. As we only need this for a few boot/mount time
allocations just switch to explicit vmalloc calls there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Remove the XFS_LOG_FORCE argument which was always set, and the
XFS_LOG_URGE define, which was never used.
Split xfs_log_force into a two helpers - xfs_log_force which forces
the whole log, and xfs_log_force_lsn which forces up to the
specified LSN. The underlying implementations already were entirely
separate, as were the users.
Also re-indent the new _xfs_log_force/_xfs_log_force which
previously had a weird coding style.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
This macro only obsfucates the log item type assignments, so kill it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Currently we define aliases for the buffer flags in various
namespaces, which only adds confusion. Remove all but the XBF_
flags to clean this up a bit.
Note that we still abuse XFS_B_ASYNC/XBF_ASYNC for some non-buffer
uses, but I'll clean that up later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Wire up quota_send_warning to send quota warnings over netlink.
This is used by various desktops to show user quota warnings.
Tested by running the quota_nld daemon while running the xfstest
quota tests and observing the warnings. I'll see how I can get a
more formal testcase for it written.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Move the error code selection after the goto label and fold the
xfs_quota_error helper into it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
The option is unused and one of the few remaining users of
xfs_bawrite, so let's get rid of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
gcc warns of an array subscript out of bounds in xfs_mod_sb().
The code is written in such a way that if the array subscript is
out of bounds, then it will assert fail. Rearrange the code to
avoid the bounds check warning.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Initialise the xfs_bmalloca_t structure to zero to avoid uninitialised
variable warnings. This is done by zeroing the arg structure rather than
using the uninitialised_var() trick so we know for certain that the
structure is correctly initialised as xfs_bmapi is a very complex
function and it is difficult to prove warnings are spurious.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The -fno-unsigned-char directive has no effect anymore as the
XFs build is clean. However, the kernel build hides pointer sign
differences so turn that back on so that we can clean up all the
mismatches prior to a userspace code resync.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
We are now consistently using unsigned char strings for names
so fix up the remaining warnings in the dir2 code to complete
the cleanup.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
To be consistent with the directory code, the attr code should use
unsigned names. Convert the names from the vfs at the highest level
to unsigned, and ænsure they are consistenly used as unsigned down
to disk.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
xfs_buf_iomove() uses xfs_caddr_t as it's parameter types, but it doesn't
care about the signedness of the variables as it is just copying the
data. Change the prototype to use void * so that we don't get sign
warnings at call sites.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
To be consistent across the codebase, convert the dirnameops to pass
the directory names by unsigned char strings.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
dmops uses a signed char for it's namespace event. To be consistent
with the rest of the code, convert them to unsigned char for the
namespace string.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Convert the struct xfs_name to use unsigned chars for the name
strings to match both what is stored on disk (__uint8_t) and what
the VFS expects (unsigned char).
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move xfsbdstrat and xfs_bdstrat_cb from xfs_lrw.c and xfs_bioerror
and xfs_bioerror_relse from xfs_rw.c into xfs_buf.c. This also
means xfs_bioerror and xfs_bioerror_relse can be marked static now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Fold XFS_bwrite into it's only caller, xfs_bwrite and move it into
xfs_buf.c instead of leaving it as a fairly large inline function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Don't bother using XFS_bwrite as it doesn't provide much code for
our use case. Instead opencode it and fold xlog_bdstrat_cb into the
new xlog_bdstrat helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Now that the perag structure is allocated memory rather than held in
an array, we don't need to have the busy extent array external to
the structure. Embed it into the perag structure to avoid needing an
extra allocation when setting up.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Add proper error handling in case an error occurs while initializing
new perag structures for a mount point. The mount structure is
restored to its previous state by deleting and freeing any perag
structures added during the call.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
The filestreams cache flush is not needed in the sync code as it
does not affect data writeback, and it is now not used by the growfs
code, either, so kill it.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Uninline xfs_perag_{get,put} so that tracepoints can be inserted
into them to speed debugging of reference count problems.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Reference count the per-ag structures to ensure that we keep get/put
pairs balanced. Assert that the reference counts are zero at unmount
time to catch leaks. In future, reference counts will enable us to
safely remove perag structures by allowing us to detect when they
are no longer in use.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
The use of an array for the per-ag structures requires reallocation
of the array when growing the filesystem. This requires locking
access to the array to avoid use after free situations, and the
locking is difficult to get right. To avoid needing to reallocate an
array, change the per-ag structures to an allocated object per ag
and index them using a tree structure.
The AGs are always densely indexed (hence the use of an array), but
the number supported is 2^32 and lookups tend to be random and hence
indexing needs to scale. A simple choice is a radix tree - it works
well with this sort of index. This change also removes another
large contiguous allocation from the mount/growfs path in XFS.
The growing process now needs to change to only initialise the new
AGs required for the extra space, and as such only needs to
exclusively lock the tree for inserts. The rest of the code only
needs to lock the tree while doing lookups, and hence this will
remove all the deadlocks that currently occur on the m_perag_lock as
it is now an innermost lock. The lock is also changed to a spinlock
from a read/write lock as the hold time is now extremely short.
To complete the picture, the per-ag structures will need to be
reference counted to ensure that we don't free/modify them while
they are still in use. This will be done in subsequent patch.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Convert the remaining direct lookups of the per ag structures to use
get/put accesses. Ensure that the loops across AGs and prior users
of the interface balance gets and puts correctly.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Use xfs_perag_get() and xfs_perag_put() in the filestreams code.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Start abstracting the perag references so that the indexing of the
structures is not directly coded into all the places that uses the
perag structures. This will allow us to separate the use of the
perag structure and the way it is indexed and hence avoid the known
deadlocks related to growing a busy filesystem.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
xfs_get_perag is really getting the perag that an inode belongs to
based on it's inode number. Convert the use of this function to just
get the perag from a provided ag number. Use this new function to
obtain the per-ag structure when traversing the per AG inode trees
for sync and reclaim.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
The xfsbufd wakes every xfsbufd_centisecs (once per second by
default) for each filesystem even when the filesystem is idle. If
the xfsbufd has nothing to do, put it into a long term sleep and
only wake it up when there is work pending (i.e. dirty buffers to
flush soon). This will make laptop power misers happy.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Now that the AIL push algorithm is traversal safe, we don't need a
watchdog function in the xfsaild to catch pushes that fail to make
progress. Remove the watchdog timeout and make pushes purely driven
by demand. This will remove the once-per-second wakeup that is seen
when the filesystem is idle and make laptop power misers happy.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Remove the roll-your-own linked list operations.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Just minor housekeeping, a lot more functions can be trivially made
static; others could if we reordered things a bit...
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Alex Elder <aelder@sgi.com>
The swap extent ioctl passes in a target inode and a temporary inode
which are clearly named in the ioctl structure. The code then
assigns temp to target and vice versa, making it extremely difficult
to work out which inode is which later in the code. Make this
consistent throughout the code.
Also make xfs_swap_extent static as there are no external users of
the function.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
To be able to diagnose whether the swap extents function is
detecting compatible inode data fork configurations for swapping
extents, add tracing points to the code to allow us to see the
format of the inode forks before and after the swap.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
When swapping extents, we can corrupt inodes by swapping data forks
that are in incompatible formats. This is caused by the two indoes
having different fork offsets due to the presence of an attribute
fork on an attr2 filesystem. xfs_fsr tries to be smart about
setting the fork offset, but the trick it plays only works on attr1
(old fixed format attribute fork) filesystems.
Changing the way xfs_fsr sets up the attribute fork will prevent
this situation from ever occurring, so in the kernel code we can get
by with a preventative fix - check that the data fork in the
defragmented inode is in a format valid for the inode it is being
swapped into. This will lead to files that will silently and
potentially repeatedly fail defragmentation, so issue a warning to
the log when this particular failure occurs to let us know that
xfs_fsr needs updating/fixing.
To help identify how to improve xfs_fsr to avoid this issue, add
trace points for the inodes being swapped so that we can determine
why the swap was rejected and to confirm that the code is making the
right decisions and modifications when swapping forks.
A further complication is even when the swap is allowed to proceed
when the fork offset is different between the two inodes then value
for the maximum number of extents the data fork can hold can be
wrong. Make sure these are also set correctly after the swap occurs.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
