Move BKL into ->put_super from the only caller. A couple of
filesystems had trivial enough ->put_super (only kfree and NULLing of
s_fs_info + stuff in there) to not get any locking: coda, cramfs, efs,
hugetlbfs, omfs, qnx4, shmem, all others got the full treatment. Most
of them probably don't need it, but I'd rather sort that out individually.
Preferably after all the other BKL pushdowns in that area.
[AV: original used to move lock_super() down as well; these changes are
removed since we don't do lock_super() at all in generic_shutdown_super()
now]
[AV: fuse, btrfs and xfs are known to need no damn BKL, exempt]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Until now we have had a 1:1 mapping between storage device physical
block size and the logical block sized used when addressing the device.
With SATA 4KB drives coming out that will no longer be the case. The
sector size will be 4KB but the logical block size will remain
512-bytes. Hence we need to distinguish between the physical block size
and the logical ditto.
This patch renames hardsect_size to logical_block_size.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
We update information in logical volume integrity descriptor after each
allocation (as LVID contains free space, number of directories and files on
disk etc.). If the filesystem is on some phase change media, this leads to its
quick degradation as such media is able to handle only 10000 overwrites or so.
We solve the problem by writing new information into LVID only on umount,
remount-ro and sync. This solves the problem at the price of longer media
inconsistency (previously media became consistent after pdflush flushed dirty
LVID buffer) but that should be acceptable.
Report by and patch written in cooperation with
Rich Coe <Richard.Coe@med.ge.com>.
Signed-off-by: Jan Kara <jack@suse.cz>
Anchor block can be located at several places on the medium. Two of the
locations are relative to media end which is problematic to detect. Also
some drives report some block as last but are not able to read it or any
block nearby before it. So let's first try block 256 and if it is all fine,
don't look at other possible locations of anchor blocks to avoid IO errors.
This change required a larger reorganization of code but the new code is
hopefully more readable and definitely shorter.
Signed-off-by: Jan Kara <jack@suse.cz>
Make udf_check_valid() return 1 if the validity check passed and 0 otherwise.
So far it was the other way around which was a bit confusing. Also make
udf_vrs() return loff_t which is really the type it should return (not int).
Signed-off-by: Jan Kara <jack@suse.cz>
This patch makes the UDF FS driver use the hardware sector size as the
default logical block size, which is required by the UDF specifications.
While the previous default of 2048 bytes was correct for optical disks,
it was not for hard disks or USB storage devices, and made it impossible
to use such a device with the default mount options. (The Linux mkudffs
tool uses a default block size of 2048 bytes even on devices with
smaller hardware sectors, so this bug is unlikely to be noticed unless
UDF-formatted USB storage devices are exchanged with other OSs.)
To avoid regressions for people who use loopback optical disk images or
who used the (sometimes wrong) defaults of mkudffs, we also try with
a block size of 2048 bytes if no anchor was found with the hardware
sector size.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Functions udf_CS0toNLS() and udf_NLStoCS0() didn't count with the fact that
NLS can return negative length when invalid character is given to it for
conversion. Thus interesting things could happen (such as overwriting random
memory with the rest of filename). Add appropriate checks.
Signed-off-by: Jan Kara <jack@suse.cz>
This patch makes udf return f_fsid info for statfs(2).
Signed-off-by: Coly Li <coly.li@suse.de>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jan Kara <jack@suse.cz>
On x86 (and several other archs) mode_t is defined as "unsigned short"
and comparing unsigned shorts to negative ints is broken (because short
is promoted to int and then compared). Fix it.
Reported-and-tested-by: Laurent Riffard <laurent.riffard@free.fr>
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
"dmode" allows overriding permissions of directories and
"mode" allows overriding permissions of files.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jan Kara <jack@suse.cz>
Allocate strings with kmalloc.
Checkstack output:
Before: udf_get_filename: 600
After: udf_get_filename: 136
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Jan Kara <jack@suse.cz>
Allocate strings with kmalloc.
Checkstack output:
Before: udf_process_sequence: 712
After: udf_process_sequence: 200
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Conflicts:
fs/nfsd/nfs4recover.c
Manually fixed above to use new creds API functions, e.g.
nfs4_save_creds().
Signed-off-by: James Morris <jmorris@namei.org>
udf_clear_inode() can leave behind buffers on mapping's i_private list (when
we truncated preallocation). Call invalidate_inode_buffers() so that the list
is properly cleaned-up before we return from udf_clear_inode(). This is ugly
and suggest that we should cleanup preallocation earlier than in clear_inode()
but currently there's no such call available since drop_inode() is called under
inode lock and thus is unusable for disk operations.
Signed-off-by: Jan Kara <jack@suse.cz>
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.
Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: James Morris <jmorris@namei.org>
This is a much better version of a previous patch to make the parser
tables constant. Rather than changing the typedef, we put the "const" in
all the various places where its required, allowing the __initconst
exception for nfsroot which was the cause of the previous trouble.
This was posted for review some time ago and I believe its been in -mm
since then.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Alexander Viro <aviro@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
UDF currently doesn't set a llseek method for regular files, which
means it will fall back to default_llseek. This means no one can seek
beyond 2 Gigabytes on udf, and that there's not protection vs
the i_size updates from writers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
I case we failed to allocate memory for inode when creating it, we did not
properly free block already allocated for this inode. Move memory allocation
before the block allocation which fixes this issue (thanks for the idea go to
Ingo Oeser <ioe-lkml@rameria.de>). Also remove a few superfluous
initializations already done in udf_alloc_inode().
Reviewed-by: Ingo Oeser <ioe-lkml@rameria.de>
Signed-off-by: Jan Kara <jack@suse.cz>
A memory allocation inside alloc_mutex must not recurse back into the
filesystem itself because that leads to lock inversion between iprune_mutex and
alloc_mutex (and thus to deadlocks - see traces below). alloc_mutex is actually
needed only to update allocation statistics in the superblock so we can drop it
before we start allocating memory for the inode.
tar D ffff81015b9c8c90 0 6614 6612
ffff8100d5a21a20 0000000000000086 0000000000000000 00000000ffff0000
ffff81015b9c8c90 ffff81015b8f0cd0 ffff81015b9c8ee0 0000000000000000
0000000000000003 0000000000000000 0000000000000000 0000000000000000
Call Trace:
[<ffffffff803c1d8a>] __mutex_lock_slowpath+0x64/0x9b
[<ffffffff803c1bef>] mutex_lock+0xa/0xb
[<ffffffff8027f8c2>] shrink_icache_memory+0x38/0x200
[<ffffffff80257742>] shrink_slab+0xe3/0x15b
[<ffffffff802579db>] try_to_free_pages+0x221/0x30d
[<ffffffff8025657e>] isolate_pages_global+0x0/0x31
[<ffffffff8025324b>] __alloc_pages_internal+0x252/0x3ab
[<ffffffff8026b08b>] cache_alloc_refill+0x22e/0x47b
[<ffffffff8026ae37>] kmem_cache_alloc+0x3b/0x61
[<ffffffff8026b15b>] cache_alloc_refill+0x2fe/0x47b
[<ffffffff8026b34e>] __kmalloc+0x76/0x9c
[<ffffffffa00751f2>] :udf:udf_new_inode+0x202/0x2e2
[<ffffffffa007ae5e>] :udf:udf_create+0x2f/0x16d
[<ffffffffa0078f27>] :udf:udf_lookup+0xa6/0xad
...
kswapd0 D ffff81015b9d9270 0 125 2
ffff81015b903c28 0000000000000046 ffffffff8028cbb0 00000000fffffffb
ffff81015b9d9270 ffff81015b8f0cd0 ffff81015b9d94c0 000000000271b490
ffffe2000271b458 ffffe2000271b420 ffffe20002728dc8 ffffe20002728d90
Call Trace:
[<ffffffff8028cbb0>] __set_page_dirty+0xeb/0xf5
[<ffffffff8025403a>] get_dirty_limits+0x1d/0x22f
[<ffffffff803c1d8a>] __mutex_lock_slowpath+0x64/0x9b
[<ffffffff803c1bef>] mutex_lock+0xa/0xb
[<ffffffffa0073f58>] :udf:udf_bitmap_free_blocks+0x47/0x1eb
[<ffffffffa007df31>] :udf:udf_discard_prealloc+0xc6/0x172
[<ffffffffa007875a>] :udf:udf_clear_inode+0x1e/0x48
[<ffffffff8027f121>] clear_inode+0x6d/0xc4
[<ffffffff8027f7f2>] dispose_list+0x56/0xee
[<ffffffff8027fa5a>] shrink_icache_memory+0x1d0/0x200
[<ffffffff80257742>] shrink_slab+0xe3/0x15b
[<ffffffff80257e93>] kswapd+0x346/0x447
...
Reported-by: Tibor Tajti <tibor.tajti@gmail.com>
Reviewed-by: Ingo Oeser <ioe-lkml@rameria.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Kmem cache passed to constructor is only needed for constructors that are
themselves multiplexeres. Nobody uses this "feature", nor does anybody uses
passed kmem cache in non-trivial way, so pass only pointer to object.
Non-trivial places are:
arch/powerpc/mm/init_64.c
arch/powerpc/mm/hugetlbpage.c
This is flag day, yes.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Jon Tollefson <kniht@linux.vnet.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Matt Mackall <mpm@selenic.com>
[akpm@linux-foundation.org: fix arch/powerpc/mm/hugetlbpage.c]
[akpm@linux-foundation.org: fix mm/slab.c]
[akpm@linux-foundation.org: fix ubifs]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In some cases it could happen that some block passed test in
udf_check_anchor_block() even though udf_read_tagged() refused to read it later
(e.g. because checksum was not correct). This patch makes
udf_check_anchor_block() use udf_read_tagged() so that the checking is
stricter.
This fixes the regression (certain disks unmountable) caused by commit
423cf6dc04.
Signed-off-by: Tomas Janousek <tomi@nomi.cz>
Signed-off-by: Jan Kara <jack@suse.cz>
Commit 706047a797, "udf: Fix compilation
warnings when UDF debug is on" inadvertently (I assume) enabled
debugging messages by default for UDF. This patch disables them again.
Signed-off-by: Paul Collins <paul@ondioline.org>
Signed-off-by: Jan Kara <jack@suse.cz>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6:
udf: Fix memory corruption when fs mounted with noadinicb option
udf: Make udf exportable
udf: fs/udf/partition.c:udf_get_pblock() mustn't be inline
When UDF filesystem is mounted with noadinicb mount option, it
happens that we extend an empty directory with a block. A code in
udf_add_entry() didn't count with this possibility and used
uninitialized data leading to memory and filesystem corruption.
Add a check whether file already has some extents before operating
on them.
Signed-off-by: Jan Kara <jack@suse.cz>
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch fixes the following build error with UML and gcc 4.3:
<-- snip -->
...
CC fs/udf/partition.o
/home/bunk/linux/kernel-2.6/git/linux-2.6/fs/udf/partition.c: In function ‘udf_get_pblock_virt15’:
/home/bunk/linux/kernel-2.6/git/linux-2.6/fs/udf/partition.c:32: sorry, unimplemented: inlining failed in call to ‘udf_get_pblock’: function body not available
/home/bunk/linux/kernel-2.6/git/linux-2.6/fs/udf/partition.c:102: sorry, unimplemented: called from here
make[3]: *** [fs/udf/partition.o] Error 1
<-- snip -->
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Let's use bsize instead.
fs/udf/namei.c:960:12: warning: symbol 'elen' shadows an earlier one
fs/udf/namei.c:937:15: originally declared here
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Jan Kara <jack@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As pointed out by Sergey Vlasov, UDF implements its own version of
the CRC ITU-T V.41. Convert it to use the one in the library.
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Cc: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Jan Kara <jack@suse.cz>
Fix two compilation warnings (and actual bugs in message formatting)
when UDF debugging is turned on.
Signed-off-by: Sebastian Manciulea <manciuleas@yahoo.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Fix mapping of blocks using VAT when it is stored in an inode.
UDF_I(inode)->i_data already points to the beginning of VAT header so there's
no need to add udf_ext0_offset(inode).
Signed-off-by: Sebastian Manciulea <manciuleas@yahoo.com>
Signed-off-by: Jan Kara <jack@suse.cz>
This patch implements parsing of metadata partitions and reading of Metadata
File thus allowing to read UDF 2.50 media. Error resilience is implemented
through accessing the Metadata Mirror File in case the data the Metadata File
cannot be read. The patch is based on the original patch by Sebastian Manciulea
<manciuleas@yahoo.com> and Mircea Fedoreanu <mirceaf_spl@yahoo.com>.
Signed-off-by: Sebastian Manciulea <manciuleas@yahoo.com>
Signed-off-by: Mircea Fedoreanu <mirceaf_spl@yahoo.com>
Signed-off-by: Jan Kara <jack@suse.cz>
According to OSTA UDF specification, only anchor blocks and primary volume
descriptors are placed on media relative to the last session. All other block
numbers are absolute (in the partition or the whole media). This seems to be
confirmed by multisession media created by other systems.
Signed-off-by: Sebastian Manciulea <manciuleas@yahoo.com>
Signed-off-by: Jan Kara <jack@suse.cz>
As we don't properly support writing to pseudooverwrite partition (we should
add entries to VAT and relocate blocks instead of just writing them), mount
filesystems with such partition as read-only.
Signed-off-by: Jan Kara <jack@suse.cz>
We didn't handle VAT packed inside the inode - we tried to call udf_block_map()
on such file which lead to strange results at best. Add proper handling of
packed VAT as we do it with other packed files.
Signed-off-by: Jan Kara <jack@suse.cz>
UDF media with VAT could have never worked because udf_fill_inode() didn't
know about case FILE_TYPE_VAT20. Fix this.
Signed-off-by: Jan Kara <jack@suse.cz>
We incorrectly (way to strictly) checked version of VAT on loading and thus
refuse to mount correct media. There are just two format versions - below 2.0
and above 2.0 and we understand both. So update the version check accordingly.
Signed-off-by: Jan Kara <jack@suse.cz>
