Return an appropriate error in the case when the driver timeouts on waiting
for firmware to go out of PCI reset.
Fixes: 233fa44bd6 ("mlxsw: pci: Implement reset done check")
Signed-off-by: Nir Dotan <nird@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Spectrum-2 PHY layer introduces a calibration period which is a part of the
Spectrum-2 firmware boot process. Hence increase the SW timeout waiting for
the firmware to come out of boot. This does not increase system boot time
in cases where the firmware PHY calibration process is done quickly.
Fixes: c3ab435466 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC")
Signed-off-by: Nir Dotan <nird@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a packet should be trapped to the CPU the device consumes a WQE
(work queue element) from an RDQ (receive descriptor queue) and copies
the packet to the address specified in the WQE. The device then tries to
post a CQE (completion queue element) that contains various metadata
(e.g., ingress port) about the packet to a CQ (completion queue).
In case the device managed to consume a WQE, but did not manage to post
the corresponding CQE, it will get stuck. This unlikely situation can be
triggered due to the scheme the driver is currently using to process
CQEs.
The driver will consume up to 512 CQEs at a time and after processing
each corresponding WQE it will ring the RDQ's doorbell, letting the
device know that a new WQE was posted for it to consume. Only after
processing all the CQEs (up to 512), the driver will ring the CQ's
doorbell, letting the device know that new ones can be posted.
Fix this by having the driver ring the CQ's doorbell for every processed
CQE, but before ringing the RDQ's doorbell. This guarantees that
whenever we post a new WQE, there is a corresponding CQE available. Copy
the currently processed CQE to prevent the device from overwriting it
with a new CQE after ringing the doorbell.
Note that the driver still arms the CQ only after processing all the
pending CQEs, so that interrupts for this CQ will only be delivered
after the driver finished its processing.
Before commit 8404f6f2e8 ("mlxsw: pci: Allow to use CQEs of version 1
and version 2") the issue was virtually impossible to trigger since the
number of CQEs was twice the number of WQEs and the number of CQEs
processed at a time was equal to the number of available WQEs.
Fixes: 8404f6f2e8 ("mlxsw: pci: Allow to use CQEs of version 1 and version 2")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Semion Lisyansky <semionl@mellanox.com>
Tested-by: Semion Lisyansky <semionl@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update email addresses of liquidio driver maintainers. Also remove a
former maintainer.
Signed-off-by: Felix Manlunas <fmanlunas@marvell.com>
Acked-by: Derek Chickles <dchickles@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
"also enables" should not be spelled as one word.
Fixes: cfc80d9a11 ("net: Introduce net_failover driver")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
In certain cases, pskb_trim_rcsum() may change skb pointers.
Reinitialize header pointers afterwards to avoid potential
use-after-frees. Add a note in the documentation of
pskb_trim_rcsum(). Found by KASAN.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=qasf
-----END PGP SIGNATURE-----
Merge tag 'media/v5.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- a regression fix at v4l2 core, with affects multi-plane streams
- a fix at vim2m driver
* tag 'media/v5.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: vim2m: only cancel work if it is for right context
media: v4l: ioctl: Validate num_planes for debug messages
media: v4l: ioctl: Validate num_planes before using it
media: v4l2-ioctl: Clear only per-plane reserved fields
- Fix reattach implementation in the Designware driver
-----BEGIN PGP SIGNATURE-----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=041y
-----END PGP SIGNATURE-----
Merge tag 'i3c/fixes-for-5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c fixes from Boris Brezillon:
- Fix the error check on master->sysclk val in the Cadence driver
- Fix reattach implementation in the Designware driver
* tag 'i3c/fixes-for-5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: dw-i3c-master: fix i3c_attach/reattach
i3c: master: Fix an error checking typo in 'cdns_i3c_master_probe()'
- jz4740: fix a compilation warning
- fsmc: fix a regression introduced by ->select_chip() deprecation
- denali: fix a regression introduced by NAND_KEEP_TIMINGS addition
-----BEGIN PGP SIGNATURE-----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=qyZu
-----END PGP SIGNATURE-----
Merge tag 'mtd/fixes-for-5.0-rc3' of git://git.infradead.org/linux-mtd
Pull mtd fixes from Boris Brezillon:
"Raw NAND changes:
- jz4740: fix a compilation warning
- fsmc: fix a regression introduced by ->select_chip() deprecation
- denali: fix a regression introduced by NAND_KEEP_TIMINGS addition"
* tag 'mtd/fixes-for-5.0-rc3' of git://git.infradead.org/linux-mtd:
mtd: rawnand: denali: get ->setup_data_interface() working again
mtd: nand: jz4740: fix '__iomem *' vs. '* __iomem'
mtd: rawnand: fsmc: Keep bank enable bit set
The cleanups for the way we handle type information introduced during
the merge window revealed that we'd been abusing the irq APIs for a long
time, causing breakage for systems. This pull request has a couple of
minimal fixes for that which restore the previous behaviour for the time
being, we'll fix it properly for v5.1 but that'd be a bit much to do as
a bug fix.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlxByIkTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0FErB/4/Od1iLnxAqb8dFmMFA/xbW8V/zmE3
8BLWUv8URhitdNPfdzWws+hD1AP5GfzoMyUiuP+BB6+x4JCBnL10vwAw7V0YYEox
NrVB9ALYdu7cGPu809cVqIretGxW28T8PsJehcoHDvSYLXaaIr36tHApIbWlT3bn
Sh166tTylLZG4bQ/KN0yEcNhyqqU6Lschp1CD7KSXux9jeMFxpQSCR9yJ2qhUbR4
igNayb4F8jCXU9R1WSD2pE3hTtsvTd/0i87HEzMq4jfSr3dck0dsW7tkewfe/MBl
1UM+6s46vqEl0u+9whJupDYvNr5ztF+wHnU85E6cX3gP442vk1sxnHaM
=HTMs
-----END PGP SIGNATURE-----
Merge tag 'regmap-fix-v5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"The cleanups for the way we handle type information introduced during
the merge window revealed that we'd been abusing the irq APIs for a
long time, causing breakage for systems.
This has a couple of minimal fixes for that which restore the previous
behaviour for the time being, we'll fix it properly for v5.1 but
that'd be a bit much to do as a bug fix"
* tag 'regmap-fix-v5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap-irq: do not write mask register if mask_base is zero
regmap: regmap-irq: silently ignore unsupported type settings
Fix "reference to nonexisting document" warnings.
Fixes: b255e500c8 ("net: documentation: build a directory structure for drivers")
Signed-off-by: Otto Sabart <ottosabart@seberm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A couple of weeks of fixes.
There's one fix for an oops on Power9 machines with Open CAPI adapters.
And a fix for probable memory corruption in some of the new NPU code, caught by
smatch though and not seen in the wild.
Plus a few other minor fixes.
There's one non-fix which is the perf_regs change. That was sent during the
merge window but I accidentally only merged the first of two patches in the
series. It's been in linux-next so hopefully doesn't conflict with anything in
acme's tree.
Thanks to:
Alexey Kardashevskiy, Andrew Donnellan, Breno Leitao, Christian Lamparter,
Christophe Leroy, Dan Carpenter, Frederic Barrat, Greg Kurz, Jason A.
Donenfeld, Madhavan Srinivasan.
-----BEGIN PGP SIGNATURE-----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=hlZ7
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"A couple of weeks of fixes.
There's one fix for an oops on Power9 machines with Open CAPI
adapters.
And a fix for probable memory corruption in some of the new NPU code,
caught by smatch though and not seen in the wild.
Plus a few other minor fixes.
There's one non-fix which is the perf_regs change. That was sent
during the merge window but I accidentally only merged the first of
two patches in the series. It's been in linux-next so hopefully
doesn't conflict with anything in acme's tree.
Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Breno Leitao,
Christian Lamparter, Christophe Leroy, Dan Carpenter, Frederic Barrat,
Greg Kurz, Jason A. Donenfeld, Madhavan Srinivasan"
* tag 'powerpc-5.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/syscalls: Fix syscall tracing
powerpc/pseries: Fix build break due to pnv_npu2_init()
powerpc/4xx/ocm: Fix fix for phys_addr_t printf warnings
powerpc/powernv/npu: Fix oops in pnv_try_setup_npu_table_group()
powerpc/tm: Limit TM code inside PPC_TRANSACTIONAL_MEM
powerpc/8xx: fix setting of pagetable for Abatron BDI debug tool.
powerpc/powernv/npu: Allocate enough memory in pnv_try_setup_npu_table_group()
powerpc/perf: Update perf_regs structure to include MMCRA
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCXEGhYwAKCRCAXGG7T9hj
vu/qAP4ljV1QwAicTP2IosIpmSojJV4BkkJOs36dgF1u4DscPAEA7YhvTzGYcZr6
7rmBIbGve6Yb24Uh4aL3ir4w+LUvSAg=
=Jm9L
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.0-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- Several fixes for the Xen pvcalls drivers (1 fix for the backend and
8 for the frontend).
- A fix for a rather longstanding bug in the Xen sched_clock()
interface which led to weird time jumps when migrating the system.
- A fix for avoiding accesses to x2apic MSRs in Xen PV guests.
* tag 'for-linus-5.0-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: Fix x86 sched_clock() interface for xen
pvcalls-front: fix potential null dereference
always clear the X2APIC_ENABLE bit for PV guest
pvcalls-front: Avoid get_free_pages(GFP_KERNEL) under spinlock
xen/pvcalls: remove set but not used variable 'intf'
pvcalls-back: set -ENOTCONN in pvcalls_conn_back_read
pvcalls-front: don't return error when the ring is full
pvcalls-front: properly allocate sk
pvcalls-front: don't try to free unallocated rings
pvcalls-front: read all data before closing the connection
Pull crypto fixes from Herbert Xu:
"This fixes the following issues:
- Zero-length DMA mapping in caam
- Invalidly mapping stack memory for DMA in talitos
- Use after free in cavium/nitrox
- Key parsing in authenc
- Undefined shift in sm3
- Bogus completion call in authencesn
- SHA support detection in caam"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: sm3 - fix undefined shift by >= width of value
crypto: talitos - fix ablkcipher for CONFIG_VMAP_STACK
crypto: talitos - reorder code in talitos_edesc_alloc()
crypto: adiantum - initialize crypto_spawn::inst
crypto: cavium/nitrox - Use after free in process_response_list()
crypto: authencesn - Avoid twice completion call in decrypt path
crypto: caam - fix SHA support detection
crypto: caam - fix zero-length buffer DMA mapping
crypto: ccree - convert to use crypto_authenc_extractkeys()
crypto: bcm - convert to use crypto_authenc_extractkeys()
crypto: authenc - fix parsing key with misaligned rta_len
- Restore the ACPI initialization ordering changed implicitly by the
module-level AML handling rework during the 4.17 development cycle
that caused the EC address space handler based on information from
ECDT to be set up before loading AML definition blocks, making it
effectively not accessible by AML on some systems that don't work
as expected any more (Rafael Wysocki).
- Add direct dependencies on PCI to Kconfig in multiple places for
code that depends on both ACPI and PCI, but the PCI dependency
was implicitly satisfied by the ACPI dependency before, to prevent
invalid configurations from being created, for example by
randconfig (Sinan Kaya).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=t7iI
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix an ACPI initialization ordering issue introduced in the 4.17
time frame and causing functional problems to appear on multiple
systems and fix some fallout of the recent change to enable building
kernels with ACPI support and without PCI.
Specifics:
- Restore the ACPI initialization ordering changed implicitly by the
module-level AML handling rework during the 4.17 development cycle
that caused the EC address space handler based on information from
ECDT to be set up before loading AML definition blocks, making it
effectively not accessible by AML on some systems that don't work
as expected any more (Rafael Wysocki).
- Add direct dependencies on PCI to Kconfig in multiple places for
code that depends on both ACPI and PCI, but the PCI dependency was
implicitly satisfied by the ACPI dependency before, to prevent
invalid configurations from being created, for example by
randconfig (Sinan Kaya)"
* tag 'acpi-5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: Look for ECDT EC after calling acpi_load_tables()
drivers: thermal: int340x_thermal: Make PCI dependency explicit
x86/intel/lpss: Make PCI dependency explicit
platform/x86: apple-gmux: Make PCI dependency explicit
platform/x86: intel_pmc: Make PCI dependency explicit
platform/x86: intel_ips: make PCI dependency explicit
vga-switcheroo: make PCI dependency explicit
ata: pata_acpi: Make PCI dependency explicit
ACPI / LPSS: Make PCI dependency explicit
The cleaner thread usually takes care of delayed iputs, with the
exception of the btrfs_end_transaction_throttle path. Delaying iputs
means we are potentially delaying the eviction of an inode and it's
respective space. The cleaner thread only gets woken up every 30
seconds, or when we require space. If there are a lot of inodes that
need to be deleted we could induce a serious amount of latency while we
wait for these inodes to be evicted. So instead wakeup the cleaner if
it's not already awake to process any new delayed iputs we add to the
list. If we suddenly need space we will less likely be backed up
behind a bunch of inodes that are waiting to be deleted, and we could
possibly free space before we need to get into the flushing logic which
will save us some latency.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Delayed iputs means we can have final iputs of deleted inodes in the
queue, which could potentially generate a lot of pinned space that could
be free'd. So before we decide to commit the transaction for ENOPSC
reasons, run the delayed iputs so that any potential space is free'd up.
If there is and we freed enough we can then commit the transaction and
potentially be able to make our reservation.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This reverts commit e73e81b6d0.
This patch causes a few problems:
- adds latency to btrfs_finish_ordered_io
- as btrfs_finish_ordered_io is used for free space cache, generating
more work from btrfs_btree_balance_dirty_nodelay could end up in the
same workque, effectively deadlocking
12260 kworker/u96:16+btrfs-freespace-write D
[<0>] balance_dirty_pages+0x6e6/0x7ad
[<0>] balance_dirty_pages_ratelimited+0x6bb/0xa90
[<0>] btrfs_finish_ordered_io+0x3da/0x770
[<0>] normal_work_helper+0x1c5/0x5a0
[<0>] process_one_work+0x1ee/0x5a0
[<0>] worker_thread+0x46/0x3d0
[<0>] kthread+0xf5/0x130
[<0>] ret_from_fork+0x24/0x30
[<0>] 0xffffffffffffffff
Transaction commit will wait on the freespace cache:
838 btrfs-transacti D
[<0>] btrfs_start_ordered_extent+0x154/0x1e0
[<0>] btrfs_wait_ordered_range+0xbd/0x110
[<0>] __btrfs_wait_cache_io+0x49/0x1a0
[<0>] btrfs_write_dirty_block_groups+0x10b/0x3b0
[<0>] commit_cowonly_roots+0x215/0x2b0
[<0>] btrfs_commit_transaction+0x37e/0x910
[<0>] transaction_kthread+0x14d/0x180
[<0>] kthread+0xf5/0x130
[<0>] ret_from_fork+0x24/0x30
[<0>] 0xffffffffffffffff
And then writepages ends up waiting on transaction commit:
9520 kworker/u96:13+flush-btrfs-1 D
[<0>] wait_current_trans+0xac/0xe0
[<0>] start_transaction+0x21b/0x4b0
[<0>] cow_file_range_inline+0x10b/0x6b0
[<0>] cow_file_range.isra.69+0x329/0x4a0
[<0>] run_delalloc_range+0x105/0x3c0
[<0>] writepage_delalloc+0x119/0x180
[<0>] __extent_writepage+0x10c/0x390
[<0>] extent_write_cache_pages+0x26f/0x3d0
[<0>] extent_writepages+0x4f/0x80
[<0>] do_writepages+0x17/0x60
[<0>] __writeback_single_inode+0x59/0x690
[<0>] writeback_sb_inodes+0x291/0x4e0
[<0>] __writeback_inodes_wb+0x87/0xb0
[<0>] wb_writeback+0x3bb/0x500
[<0>] wb_workfn+0x40d/0x610
[<0>] process_one_work+0x1ee/0x5a0
[<0>] worker_thread+0x1e0/0x3d0
[<0>] kthread+0xf5/0x130
[<0>] ret_from_fork+0x24/0x30
[<0>] 0xffffffffffffffff
Eventually, we have every process in the system waiting on
balance_dirty_pages(), and nobody is able to make progress on page
writeback.
The original patch tried to fix an OOM condition, that happened on 4.4 but no
success reproducing that on later kernels (4.19 and 4.20). This is more likely
a problem in OOM itself.
Link: https://lore.kernel.org/linux-btrfs/20180528054821.9092-1-ethanlien@synology.com/
Reported-by: Chris Mason <clm@fb.com>
CC: stable@vger.kernel.org # 4.18+
CC: ethanlien <ethanlien@synology.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function jz_nand_ioremap_resource() needs a pointer to an __iomem
pointer as its last argument but this argument is declared as:
void * __iomem *base
Fix this by using the correct declaration:
void __iomem **base
which then also removes the following Sparse's warnings:
282:15: warning: incorrect type in assignment (different address spaces)
282:15: expected void *[noderef] <asn:2>
282:15: got void [noderef] <asn:2> *
322:57: warning: incorrect type in argument 4 (different address spaces)
322:57: expected void *[noderef] <asn:2> *base
322:57: got void [noderef] <asn:2> **
402:67: warning: incorrect type in argument 4 (different address spaces)
402:67: expected void *[noderef] <asn:2> *base
402:67: got void [noderef] <asn:2> **
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
Replace the kfree_skb() by consume_skb() to be drop monitor(dropwatch,
perf) friendly.
Signed-off-by: Yang Wei <yang.wei9@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace the kfree_skb() by consume_skb() to be drop monitor(dropwatch,
perf) friendly.
Signed-off-by: Yang Wei <yang.wei9@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
The XGBE hardware has support for performing MDIO operations using an
MDIO command request. The driver mistakenly uses the mdio port address
as the MDIO command request device address instead of the MDIO command
request port address. Additionally, the driver does not properly check
for and create a clause 45 MDIO command.
Check the supplied MDIO register to determine if the request is a clause
45 operation (MII_ADDR_C45). For a clause 45 operation, extract the device
address and register number from the supplied MDIO register and use them
to set the MDIO command request device address and register number fields.
For a clause 22 operation, the MDIO request device address is set to zero
and the MDIO command request register number is set to the supplied MDIO
register. In either case, the supplied MDIO port address is used as the
MDIO command request port address.
Fixes: 732f2ab7af ("amd-xgbe: Add support for MDIO attached PHYs")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The phy drivers for CS4340 and TN2020 are missing their
features attributes. Add them.
Fixes: 719655a149 ("net: phy: Replace phy driver features u32 with link_mode bitmap")
Reported-by: Scott Wood <oss@buserror.net>
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As txq_trans_update() only updates trans_start when the lock is held,
trans_start does not get updated if NETIF_F_LLTX is declared.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The skb header should be set to ethernet header before using
is_skb_forwardable. Because the ethernet header length has been
considered in is_skb_forwardable(including dev->hard_header_len
length).
To reproduce the issue:
1, add 2 ports on linux bridge br using following commands:
$ brctl addbr br
$ brctl addif br eth0
$ brctl addif br eth1
2, the MTU of eth0 and eth1 is 1500
3, send a packet(Data 1480, UDP 8, IP 20, Ethernet 14, VLAN 4)
from eth0 to eth1
So the expect result is packet larger than 1500 cannot pass through
eth0 and eth1. But currently, the packet passes through success, it
means eth1's MTU limit doesn't take effect.
Fixes: f6367b4660 ("bridge: use is_skb_forwardable in forward path")
Cc: bridge@lists.linux-foundation.org
Cc: Nkolay Aleksandrov <nikolay@cumulusnetworks.com>
Cc: Roopa Prabhu <roopa@cumulusnetworks.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vhost dirty page logging API is designed to sync through GPA. But we
try to log GIOVA when device IOTLB is enabled. This is wrong and may
lead to missing data after migration.
To solve this issue, when logging with device IOTLB enabled, we will:
1) reuse the device IOTLB translation result of GIOVA->HVA mapping to
get HVA, for writable descriptor, get HVA through iovec. For used
ring update, translate its GIOVA to HVA
2) traverse the GPA->HVA mapping to get the possible GPA and log
through GPA. Pay attention this reverse mapping is not guaranteed
to be unique, so we should log each possible GPA in this case.
This fix the failure of scp to guest during migration. In -next, we
will probably support passing GIOVA->GPA instead of GIOVA->HVA.
Fixes: 6b1e6cc785 ("vhost: new device IOTLB API")
Reported-by: Jintack Lim <jintack@cs.columbia.edu>
Cc: Jintack Lim <jintack@cs.columbia.edu>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net_tstamp.h is an UAPI header, so it was moved under include/uapi.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Not much so far, but I'm feeling like the 2nd PR -rc will be larger than
this. We have the usual batch of bugs and two fixes to code merged this cycle.
- Restore valgrind support for the ioctl verbs interface merged this window,
and fix a missed error code on an error path from that conversion
- A user reported crash on obsolete mthca hardware
- pvrdma was using the wrong command opcode toward the hypervisor
- NULL pointer crash regression when dumping rdma-cm over netlink
- Be conservative about exposing the global rkey
-----BEGIN PGP SIGNATURE-----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=ymZq
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes frfom Jason Gunthorpe:
"Not much so far. We have the usual batch of bugs and two fixes to code
merged this cycle:
- Restore valgrind support for the ioctl verbs interface merged this
window, and fix a missed error code on an error path from that
conversion
- A user reported crash on obsolete mthca hardware
- pvrdma was using the wrong command opcode toward the hypervisor
- NULL pointer crash regression when dumping rdma-cm over netlink
- Be conservative about exposing the global rkey"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/uverbs: Mark ioctl responses with UVERBS_ATTR_F_VALID_OUTPUT
RDMA/mthca: Clear QP objects during their allocation
RDMA/vmw_pvrdma: Return the correct opcode when creating WR
RDMA/cma: Add cm_id restrack resource based on kernel or user cm_id type
RDMA/nldev: Don't expose unsafe global rkey to regular user
RDMA/uverbs: Fix post send success return value in case of error
-----BEGIN PGP SIGNATURE-----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=hgg/
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2019-01-18' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"The rc3 fixes are a bit scattered:
- meson, sun4i and rockchip all had missing of_node_put.
- qxl and virtio both were advertising dma-buf to userspace when they
really shouldn't have.
Otherwise:
meson:
- modesetting regression fix
i915 GVT:
- one cmd parser failure fix
- region cleanup fix in vGPU destroy
amdgpu:
- KFD fixes for arm64 mixed APU/DGPU
- vega12 powerplay fix
- raven DC fixes
- freesync fix"
* tag 'drm-fixes-2019-01-18' of git://anongit.freedesktop.org/drm/drm:
drm/amd/display: Detach backlight from stream
drm/sun4i: backend: add missing of_node_puts
Revert "drm/amdgpu: validate user pitch alignment"
Revert "drm/amdgpu: validate user GEM object size"
drm/meson: Fix atomic mode switching regression
drm/i915/gvt: Fix mmap range check
drm/i915/gvt: free VFIO region space in vgpu detach
drm/amd/display: Fix disabled cursor on top screen edge
drm/amd/display: fix warning on raven hotplug
drm/amd/display: fix PME notification not working in RV desktop
drm/amd/display: Only get the connector state for VRR when toggled
drm/amd/display: Pack DMCU iRAM alignment
drm/amd/powerplay: run acg btc for Vega12
drm/amdkfd: Don't assign dGPUs to APU topology devices
drm/amdkfd: Allow building KFD on ARM64 (v2)
drm/meson: add missing of_node_put
drm/virtio: drop prime import/export callbacks
drm/qxl: drop prime import/export callbacks
drm/i915/gvt: Allow F_CMD_ACCESS on mmio 0x21f0
drm/rockchip: add missing of_node_put
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQUwxxKyE5l/npt8ARiEGxRG/Sl2wUCXED1agAKCRBiEGxRG/Sl
2125AP4+hSXiVYvxgQg4zeAHzd00GKAIcYTudrzZ/iX5E19UlQD7B3h7HiTgvNIo
QOvU+0PChsk/qwg1+Ztw8Gw3WZxl/wM=
=I9ym
-----END PGP SIGNATURE-----
Merge tag 'led-fix-for-5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED fix from Jacek Anaszewski.
* tag 'led-fix-for-5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
leds: lp5523: fix a missing check of return value of lp55xx_read
Minor fixes/regressions.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=kzWH
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"Minor fixes/regressions"
* tag 'hwmon-for-v5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (tmp421) Correct the misspelling of the tmp442 compatible attribute in OF device ID table
hwmon: (occ) Fix potential integer overflow
hwmon: (lm80) Fix missing unlock on error in set_fan_div()
hwmon: (nct6775) Enable IO mapping for NCT6797D and NCT6798D
hwmon: (nct6775) Fix chip ID for NCT6798D
Remove the imprecise and sloppy:
"This files is licensed under the GPL."
license notice in the top level comment.
1) The file already contains a SPDX license identifier which clearly
states that the license of the file is GPL V2 only
2) The notice resolves to GPL v1 or later for scanners which is just
contrary to the intent of SPDX identifiers to provide clear and non
ambiguous license information. Aside of that the value add of this
notice is below zero,
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Matias Bjorling <mb@lightnvm.io>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Fixes: 6a5ac98465 ("block: Make struct request_queue smaller for CONFIG_BLK_DEV_ZONED=n")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Would usually do this split-out, verifying each component indivitually, but
this has been squashed together to be more palatable for merging in 5.0-rc.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Since commit cb9f1b7838, scapy (which uses an AF_PACKET socket in
SOCK_RAW mode) is unable to send a basic icmp packet over a sit tunnel:
Here is a example of the setup:
$ ip link set ntfp2 up
$ ip addr add 10.125.0.1/24 dev ntfp2
$ ip tunnel add tun1 mode sit ttl 64 local 10.125.0.1 remote 10.125.0.2 dev ntfp2
$ ip addr add fd00:cafe:cafe::1/128 dev tun1
$ ip link set dev tun1 up
$ ip route add fd00:200::/64 dev tun1
$ scapy
>>> p = []
>>> p += IPv6(src='fd00💯:1', dst='fd00:200::1')/ICMPv6EchoRequest()
>>> send(p, count=1, inter=0.1)
>>> quit()
$ ip -s link ls dev tun1 | grep -A1 "TX.*errors"
TX: bytes packets errors dropped carrier collsns
0 0 1 0 0 0
The problem is that the network offset is set to the hard_header_len of the
output device (tun1, ie 14 + 20) and in our case, because the packet is
small (48 bytes) the pskb_inet_may_pull() fails (it tries to pull 40 bytes
(ipv6 header) starting from the network offset).
This problem is more generally related to device with variable hard header
length. To avoid a too intrusive patch in the current release, a (ugly)
workaround is proposed in this patch. It has to be cleaned up in net-next.
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=993675a3100b1
Link: http://patchwork.ozlabs.org/patch/1024489/
Fixes: cb9f1b7838 ("ip: validate header length on virtual device xmit")
CC: Willem de Bruijn <willemb@google.com>
CC: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If sch_fq packet scheduler is not used, TCP can fallback to
internal pacing, but this requires sk_pacing_status to
be properly set.
Fixes: 8c4b4c7e9f ("bpf: Add setsockopt helper function to bpf")
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Lawrence Brakmo <brakmo@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
In sock_setsockopt() (net/core/sock.h), when SO_MARK option is used
to change sk_mark, sk_dst_reset(sk) is called. The same should be
done in bpf_setsockopt().
Fixes: 8c4b4c7e9f ("bpf: Add setsockopt helper function to bpf")
Reported-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Peter Oskolkov <posk@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
- Add missing calls to of_node_put to sun4i, meson, and rockchip.
- Drop unimplemented prime callbacks in virtio and qxl, so support
for prime is not advertised on those drivers.
- Fix mode switching regression in meson.
-----BEGIN PGP SIGNATURE-----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=r2rK
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2019-01-17' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v5.0-rc3:
- Add missing calls to of_node_put to sun4i, meson, and rockchip.
- Drop unimplemented prime callbacks in virtio and qxl, so support
for prime is not advertised on those drivers.
- Fix mode switching regression in meson.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9af07312-f435-2fda-65a2-9fe92cdf5da4@linux.intel.com
-----BEGIN PGP SIGNATURE-----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=cHcP
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-fixes-2019-01-17' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915/gvt fixes for v5.0-rc3
"This contains one cmd parser failure fix to allow cmd access for one
register, and fix region cleanup properly in vGPU destroy, and another
fix for critical mmap size check mistake."
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87ef9bfusc.fsf@intel.com
After commit 23b0269e58 ("net: udp6: prefer listeners bound to an
address"), UDP-Lite only works when specifying a local address for
the sockets.
This is related to the problem addressed in the commit 719f835853
("udp: add rehash on connect()"). Moreover, __udp6_lib_lookup() now
looks for a socket immediately in the secondary hash table.
And this issue was found with LTP/network tests as well.
Fixes: 23b0269e58 ("net: udp6: prefer listeners bound to an address")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit 4cdeeee925 ("net: udp: prefer listeners bound to an
address"), UDP-Lite only works when specifying a local address for
the sockets.
This is related to the problem addressed in the commit 719f835853
("udp: add rehash on connect()"). Moreover, __udp4_lib_lookup() now
looks for a socket immediately in the secondary hash table.
The issue was found with LTP/network tests (UDP-Lite test-cases).
Fixes: 4cdeeee925 ("net: udp: prefer listeners bound to an address")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
