Here is an example /proc/iomem listing for a system with 2 namespaces,
one in "sector" mode and one in "memory" mode:
1fc000000-2fbffffff : Persistent Memory (legacy)
1fc000000-2fbffffff : namespace1.0
340000000-34fffffff : Persistent Memory
340000000-34fffffff : btt0.1
Here is the corresponding ndctl listing:
# ndctl list
[
{
"dev":"namespace1.0",
"mode":"memory",
"size":4294967296,
"blockdev":"pmem1"
},
{
"dev":"namespace0.0",
"mode":"sector",
"size":267091968,
"uuid":"f7594f86-badb-4592-875f-ded577da2eaf",
"sector_size":4096,
"blockdev":"pmem0s"
}
]
Notice that the ndctl listing is purely in terms of namespace devices,
while the iomem listing leaks the internal "btt0.1" implementation
detail. Given that ndctl requires the namespace device name to change
the mode, for example:
# ndctl create-namespace --reconfig=namespace0.0 --mode=raw --force
...use the namespace name in the iomem listing to keep the claiming
device name consistent across different mode settings.
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
If the dax_pmem driver is passed a resource that is already busy the
driver probe attempt should fail with a message like the following:
dax_pmem dax0.1: could not reserve region [mem 0x100000000-0x11fffffff]
However, if we do not catch the error we crash for the obvious reason of
accessing memory that is not mapped.
BUG: unable to handle kernel paging request at ffffc90020001000
IP: [<ffffffff81496712>] __memcpy+0x12/0x20
[..]
Call Trace:
[<ffffffff815c4960>] ? nsio_rw_bytes+0x60/0x180
[<ffffffff815c6045>] nd_pfn_validate+0x75/0x320
[<ffffffff815c63a9>] nvdimm_setup_pfn+0xb9/0x5d0
[<ffffffff815c48ef>] ? devm_nsio_enable+0xff/0x110
[<ffffffff815cb699>] dax_pmem_probe+0x59/0x260
Cc: <stable@vger.kernel.org>
Fixes: ab68f26221 ("/dev/dax, pmem: direct access to persistent memory")
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
We need to wait until the percpu_ref is released before exit. Otherwise,
we sometimes lose the race and trigger this new warning that was added
in v4.9 (commit a67823c1ed "percpu-refcount: init ->confirm_switch
member properly"):
WARNING: CPU: 0 PID: 3629 at lib/percpu-refcount.c:107 percpu_ref_exit+0x51/0x60
[..]
Call Trace:
[<ffffffff814bf093>] dump_stack+0x85/0xc2
[<ffffffff810b15db>] __warn+0xcb/0xf0
[<ffffffff810b170d>] warn_slowpath_null+0x1d/0x20
[<ffffffff814d70c1>] percpu_ref_exit+0x51/0x60
[<ffffffffa005706a>] dax_pmem_percpu_exit+0x1a/0x50 [dax_pmem]
[<ffffffff81615f1f>] devm_action_release+0xf/0x20
Cc: <stable@vger.kernel.org>
Fixes: ab68f26221 ("/dev/dax, pmem: direct access to persistent memory")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The data offset for a dax region needs to account for a reservation in
the resource range. Otherwise, device-dax is allowing mappings directly
into the memmap or device-info-block area with crash signatures like the
following:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
IP: get_zone_device_page+0x11/0x30
Call Trace:
follow_devmap_pmd+0x298/0x2c0
follow_page_mask+0x275/0x530
__get_user_pages+0xe3/0x750
__gfn_to_pfn_memslot+0x1b2/0x450 [kvm]
tdp_page_fault+0x130/0x280 [kvm]
kvm_mmu_page_fault+0x5f/0xf0 [kvm]
handle_ept_violation+0x94/0x180 [kvm_intel]
vmx_handle_exit+0x1d3/0x1440 [kvm_intel]
kvm_arch_vcpu_ioctl_run+0x81d/0x16a0 [kvm]
kvm_vcpu_ioctl+0x33c/0x620 [kvm]
do_vfs_ioctl+0xa2/0x5d0
SyS_ioctl+0x79/0x90
entry_SYSCALL_64_fastpath+0x1a/0xa4
Fixes: ab68f26221 ("/dev/dax, pmem: direct access to persistent memory")
Link: http://lkml.kernel.org/r/147205536732.1606.8994275381938837346.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Abhilash Kumar Mulumudi <m.abhilash-kumar@hpe.com>
Reported-by: Toshi Kani <toshi.kani@hpe.com>
Tested-by: Toshi Kani <toshi.kani@hpe.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/dax/dax.c:75:6: warning: symbol 'dax_region_put' was not declared.
drivers/dax/dax.c:95:19: warning: symbol 'alloc_dax_region' was not declared.
drivers/dax/dax.c:173:5: warning: symbol 'devm_create_dax_dev' was not declared.
drivers/dax/pmem.c:27:17: warning: symbol 'to_dax_pmem' was not declared.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
If devm_add_action() fails, we are explicitly calling the cleanup to free
the resources allocated. Use the helper devm_add_action_or_reset()
and return directly in case of error, since the cleanup function
has been already called by the helper if there was any error.
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Vikas C Sajjan <vikas.cha.sajjan@hpe.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Device DAX is the device-centric analogue of Filesystem DAX
(CONFIG_FS_DAX). It allows memory ranges to be allocated and mapped
without need of an intervening file system. Device DAX is strict,
precise and predictable. Specifically this interface:
1/ Guarantees fault granularity with respect to a given page size (pte,
pmd, or pud) set at configuration time.
2/ Enforces deterministic behavior by being strict about what fault
scenarios are supported.
For example, by forcing MADV_DONTFORK semantics and omitting MAP_PRIVATE
support device-dax guarantees that a mapping always behaves/performs the
same once established. It is the "what you see is what you get" access
mechanism to differentiated memory vs filesystem DAX which has
filesystem specific implementation semantics.
Persistent memory is the first target, but the mechanism is also
targeted for exclusive allocations of performance differentiated memory
ranges.
This commit is limited to the base device driver infrastructure to
associate a dax device with pmem range.
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
