2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-22 12:14:01 +08:00
Commit Graph

21 Commits

Author SHA1 Message Date
Sergei Shtylyov
dace48d04d ARM: shmobile: R8A7779: add Ether support
Add Ether clock and platform device for R8A7779 SoC; add a function to register
this device with board-specific platform data.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-05 10:47:03 +09:00
Kuninori Morimoto
f0ff5a0a82 ARM: shmobile: r8a7779: add each clocks ratio on comment area
Adding comment describing the r8a7779 clock frequencies depending on
MD pin settings.

Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-04 16:57:41 +09:00
Kuninori Morimoto
ec0728d679 ARM: shmobile: r8a7779: remove DIV4 clocks and use fixed ratio clock
R-Car H1 has many clocks, and it is possible to read/use clock ratio
of these clocks from FRQMRx as DIV4 clocks.
But, these ratio are fixed value and these are decided
by MD pin status.
This means that we can use fixed ratio clock via MD pin status,
instead of DIV4 clocks.

This patch reads MD pin status, and sets PLLA clock (= root clock),
and used fixed ratio clock for other clocks.
It was tesed on marzen board.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-04-02 11:02:18 +09:00
Phil Edworthy
d75bc78b50 r8a7779: Add Display Unit clock support
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
[Rename device from to rcarfb to rcar-du]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[Manual conflict resolution]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-18 21:22:34 +09:00
Vladimir Barinov
a7b9837c77 ARM: mach-shmobile: r8a7779: add SATA support
Add SATA clock for r8a7779 SoC (for both device tree and usual cases).
Register SATA controller as a "late" platform device on r8a7779 SoC.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-13 02:13:22 +09:00
Simon Horman
f9047306fd ARM: shmobile: r8a7779: Correct TMU clock support again
After discussion on the linux-sh mailing list and reference to the
hardware documentation it appears that 'TMU00', 'TMU01' and 'TMU02'
use a common clock.

The sh_tmu.1 portion of this change resolves a regression introduced in
58079fa7d5 (ARM: shmobile: r8a7779: Correct
TMU clock support) and fixes a regression introduced by that patch. That
patch is queued up for v3.9.

...
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
INFO: rcu_sched self-detected stall on CPUINFO: rcu_sched detected stalls on
+CPUs/tasks: { 1} (detected by 2, t=279640 jiffies, g=4294967052, c=4294967051,
+q=38)
Task dump for CPU 1:
swapper/0       R running      0     1      0 0x00000002
[<c02b8f5c>] (__schedule+0x1b0/0x4c0) from [<c013c590>] (__loop_delay+0x4/0xc)

 { 1}  (t=279640 jiffies g=4294967052 c=4294967052 q=37)
[<c000ef9c>] (unwind_backtrace+0x0/0xf8) from [<c0068488>]
+(rcu_check_callbacks+0x218/0x6b8)
[<c0068488>] (rcu_check_callbacks+0x218/0x6b8) from [<c0026774>]
+(update_process_times+0x38/0x4c)
[<c0026774>] (update_process_times+0x38/0x4c) from [<c00569e0>]
+(tick_nohz_handler+0xb4/0x11c)
[<c00569e0>] (tick_nohz_handler+0xb4/0x11c) from [<c000e518>]
+(twd_handler+0x34/0x44)
[<c000e518>] (twd_handler+0x34/0x44) from [<c0063484>]
+(handle_percpu_devid_irq+0x68/0x80)
[<c0063484>] (handle_percpu_devid_irq+0x68/0x80) from [<c005febc>]
+(generic_handle_irq+0x20/0x30)
[<c005febc>] (generic_handle_irq+0x20/0x30) from [<c000a5ec>]
+(handle_IRQ+0x40/0x90)
[<c000a5ec>] (handle_IRQ+0x40/0x90) from [<c000934c>] (gic_handle_irq+0x2c/0x5c)
[<c000934c>] (gic_handle_irq+0x2c/0x5c) from [<c0009a40>] (__irq_svc+0x40/0x50)
Exception stack(0xef03ddf8 to 0xef03de40)
dde0:                                                       000001c1 ffffffff
de00: 000001d8 01bf01bf ef35ec40 ef35e800 ef35ec6c 0000002b ef35ec68 c013c560
de20: c0392994 60000113 00000000 ef03de40 c01a5d40 c013c590 20000113 ffffffff
[<c0009a40>] (__irq_svc+0x40/0x50) from [<c013c590>] (__loop_delay+0x4/0xc)

Cc: Denis Oliver Kropp <dok@directfb.org>
Cc: Magnus Damm <damm@opensource.se>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-02-19 10:05:27 +09:00
Simon Horman
58079fa7d5 ARM: shmobile: r8a7779: Correct TMU clock support
During code review it was noticed that the clock value for
TMU01 was incorrect and the value for TMU02 was missing.

For reference: As of 3.8-rc6 there are no in-tree consumes of these clocks.

Reported-by: Denis Oliver Kropp <dok@directfb.org>
Reviewed-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-02-05 12:31:18 +09:00
Arnd Bergmann
1bf0bc1e05 Merge branch 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
From Simon Horman <horms@verge.net.au>:
  This series is based on the renesas/soc branch of the arm-soc tree.
  There will be a subquent 'SoC2' pull request which is based on this
  pull-request and a pull-request for boards.

* 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: add fsi external clock sh7372
  ARM: shmobile: add fsi external clock on r8a7740
  ARM: shmobile: r8a7740: add FSI-DVI clocks
  ARM: shmobile: sh7372: use sh_clk_fsidiv_register() for FSI-DIV clocks
  ARM: shmobile: sh7372: sh7372_fsidivX_clk become non-global
  sh: clkfwk: add sh_clk_fsidiv_register()
  ARM: shmobile: r8a7779: add USB OHCI clock support
  ARM: shmobile: r8a7779: add USB EHCI clock support
  ARM: shmobile: r8a7740: add USB24 clock explain
  ARM: shmobile: r8a7779: PFC rename PENCx -> USB_PENCx

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-11-12 21:45:19 +01:00
Kuninori Morimoto
9d69f5b87e ARM: shmobile: r8a7779: add USB OHCI clock support
ohci-platform driver require these clocks

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
2012-11-07 17:11:48 +09:00
Kuninori Morimoto
88419548f2 ARM: shmobile: r8a7779: add USB EHCI clock support
ehci-platform driver require these clocks

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
2012-11-07 17:11:42 +09:00
Olof Johansson
ccb1cfcb96 Merge branch 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
From Simon Horman:
* 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: r8a7740: Enable PMU
  ARM: mach-shmobile: add FLCTL DMA slave definitions for sh7372
  ARM: shmobile: r8a7779: add I2C driver support
  ARM: shmobile: r8a7779: add I2C clock support
  ARM: shmobile: r8a7779: add HSPI clock support
  ARM: shmobile: r8a7740: fixup DT machine desc name typo
  ARM: shmobile: r8a7779: Replace modify_scu_cpu_psr with scu_power_mode
  ARM: shmobile: sh73a0: Replace modify_scu_cpu_psr with scu_power_mode
  ARM: shmobile: emev2: Replace modify_scu_cpu_psr with scu_power_mode
  ARM: shmobile: Remove SH7377 support
  ARM: shmobile: Remove SH7367 support
2012-11-06 06:31:15 -08:00
Kuninori Morimoto
16c40abcfa ARM: shmobile: r8a7779: add I2C clock support
This patch is required from R-Car I2C driver

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
2012-11-06 13:47:23 +09:00
Kuninori Morimoto
f92246e61a ARM: shmobile: r8a7779: add HSPI clock support
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
2012-11-06 13:47:22 +09:00
Kuninori Morimoto
11f93576b0 ARM: shmobile: r8a7779: use __iomem pointers for MMIO
0a4b04dc29
(ARM: shmobile: use __iomem pointers for MMIO)
modified iomem pointers so that IOMEM() macro will be used,
but clock-r8a7779.c was out of target.
This patch fixes it up.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
2012-10-16 08:58:56 +09:00
Phil Edworthy
263510ec77 r8a7779: add SDHI clock support
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
2012-09-06 10:49:18 +09:00
Nobuhiro Iwamatsu
64e9de2f85 ARM: mach-shmobile: Convert sh_clk_mstp32_register to sh_clk_mstp_register
sh_clk_mstp32_register is deprecated. This convert to sh_clk_mstp_register.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-07-02 23:41:34 +02:00
Magnus Damm
6b6a4c067c ARM: mach-shmobile: rename clk_init() to shmobile_clk_init()
Rename clk_init() to shmobile_clk_init() to avoid a potential
future name space collision with the common clock framework.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-03-12 22:19:43 +01:00
Magnus Damm
ae8d194902 ARM: mach-shmobile: r8a7779 sh_clk_ops rename
Convert r8a7779 to use sh_clk_ops.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-03-12 22:19:10 +01:00
Kuninori Morimoto
916b1f8c81 ARM: mach-shmobile: clock-r8a7779: clkz/clkzs support
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-09 10:24:16 +09:00
Kuninori Morimoto
b5813c7386 ARM: mach-shmobile: clock-r8a7779: add DIV4 clock support
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-09 10:24:15 +09:00
Magnus Damm
f411fade00 ARM: mach-shmobile: r8a7779 and Marzen base support V2
Initial support for the r8a7779 SoC and the Marzen board (V2).

Only SCIF ports and the TMU are supported at this point.

To keep things simple only entity-mapped virt-to-phys mappings
are supported. This forces drivers and other SoC glue code to
make use of ioremap(). We cannot support early serial console
due to virtual address space collisions with the ARM kernel.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-09 10:13:59 +09:00