The Focusrite Scarlett Gen 2/3 interfaces with internal mixers have a
"standalone" mode. When the interface is not connected to a USB host
and standalone mode is enabled, the interface will pass audio as
previously configured. This patch adds an ALSA control to allow
enabling/disabling that mode.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/cd88871c5e77abd5c23a4758a1f2ec9fd427fd69.1646578164.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
scarlett2_config_items[] contains the parameters for the configuration
items. The driver previously had two sets of configurations items; one
for devices with no mixer, and one for devices with a mixer. This
patch splits the latter into two (one set for Gen 2 devices and one
set for Gen 3 devices) in preparation for a new item (standalone)
which is present in both but with a different offset.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/20969f9ea500684e978c87067fbdc7e73de1f6ed.1646578164.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make use of the struct_size() helper instead of an open-coded version,
in order to avoid any potential type mistakes or integer overflows that,
in the worst scenario, could lead to heap overflows.
Also, address the following sparse warnings:
sound/usb/mixer_scarlett_gen2.c:1064:28: warning: using sizeof on a flexible structure
sound/usb/mixer_scarlett_gen2.c:1065:29: warning: using sizeof on a flexible structure
Link: https://github.com/KSPP/linux/issues/174
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220120211600.GA28841@embeddedor
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The values of the line output controls can change when the SW/HW
switches are set to HW, and also when speaker switching is enabled.
These notifications were sent with a mask of only
SNDRV_CTL_EVENT_MASK_INFO. Change the notifications to set the
SNDRV_CTL_EVENT_MASK_VALUE mask bit as well.
When the mute control is updated, the notification was sent with a
mask of SNDRV_CTL_EVENT_MASK_INFO. Change the mask to the correct
value of SNDRV_CTL_EVENT_MASK_VALUE.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/8192e15ba62fa4bc90425c005f265c0de530be20.1626959758.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After the hardware mute button is pressed, private->vol_updated is set
so that the mute status is invalidated. As the channel mute values may
be affected by the global mute value, update scarlett2_mute_ctl_get()
to call scarlett2_update_volumes() if private->vol_updated is set.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/aa18ddbf8d8bd7f31832ab1b6b6057c00b931202.1626959758.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Clang warns:
sound/usb/mixer_scarlett_gen2.c:1189:32: warning: expression result
unused [-Wunused-value]
for (i = 0; i < count; i++, (u16 *)buf++)
^ ~~~~~
1 warning generated.
It appears the intention was to cast the void pointer to a u16 pointer
so that the data could be iterated through like an array of u16 values.
However, the cast happens after the increment because a cast is an
rvalue, whereas the post-increment operator only works on lvalues, so
the loop does not iterate as expected. This is not a bug in practice
because count is not greater than one at the moment but this could
change in the future so this should be fixed.
Replace the cast with a temporary variable of the proper type, which is
less error prone and fixes the iteration. Do the same thing for the
'u8 *' below this if block.
Fixes: ac34df733d ("ALSA: usb-audio: scarlett2: Update get_config to do endian conversion")
Link: https://github.com/ClangBuiltLinux/linux/issues/1408
Acked-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20210627051202.1888250-1-nathan@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Mixer control put callbacks should return 1 if the value is changed.
Fix the mute, air, phantom, direct monitor, speaker switch, talkback,
and MSD controls accordingly.
Fix scarlett2_speaker_switch_enable() to not ignore the return value
of scarlett2_sw_hw_change().
Reported-by: Aaron Wolf <aaron@wolftune.com>
Tested-by: Aaron Wolf <aaron@wolftune.com>
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/76643f7ac81aef93351122d07881e30d51dcb1b9.1624798436.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The 18i8 Gen 3 has 4 inputs with a pad control, not 2. Update
s18i8_gen3_info.pad_input_count.
Reported-by: Aaron Wolf <aaron@wolftune.com>
Tested-by: Aaron Wolf <aaron@wolftune.com>
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/29a6ce412a42373daab7c96c395560461fcf08c6.1624798436.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For configuration items with a size of 16, scarlett2_usb_get_config()
was filling *buf with little-endian data. Update it to convert to CPU
endian. This function is not currently used so affects nothing yet;
will be used by the upcoming talkback feature.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/cbc8b6eedd859dd27086ab4126d724a86dd50bcb.1624379707.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The 18i8 and 18i20 Gen 3 support "speaker switching". Add a Speaker
Switch control which can be set to Off/Main/Alt.
When speaker switching is enabled or disabled, the interface may
change the state of the Analog Outputs 3 and 4 routing and the global
mute button, so use a flag private->speaker_switching_switched to note
that those should be checked when the next "monitor other"
notification is received.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/874193a534cd0aeb6f2e108ae761cadd2dc25ad2.1624379707.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Enabling/disabling speaker switching will update the mux
configuration. To prepare for this, add a private->mux_updated flag
and update the scarlett2_mux_src_enum_ctl_get() callback to check it.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/5ce3bb9fe4006b550d18c783c5ff640fe0bfbfcb.1624379707.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Save the struct snd_kcontrol pointers for the sw_hw and mux controls.
This is in preparation for speaker switching support which needs to be
able to update those controls.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/269d89181bf29dbea80ba6f8cfff84fb23b77f86.1624379707.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Split part of scarlett2_sw_hw_enum_ctl_put() out into
scarlett2_sw_hw_change() so that the code which actually makes the
change is available in its own function. This will be used by the
speaker switching support which needs to set the SW/HW switch to HW
when speaker switching is enabled.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/f2cf91841ba067b490e7709bc4b14f4532b4ddd5.1624379707.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Solo and 2i2 devices don't have a mixer but they do have a "direct
monitor" switch. Add support for getting and setting the state of this
switch.
Co-developed-by: Vladimir Sadovnikov <sadko4u@gmail.com>
Signed-off-by: Vladimir Sadovnikov <sadko4u@gmail.com>
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/61d23dc4feb3b046d870ad7203e66ff2bd1d278c.1624379707.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some inputs on Gen 3 models support software-selectable phantom power.
Add support for getting and setting the state of those switches and
the "Phantom Power Persistence" switch.
Co-developed-by: Vladimir Sadovnikov <sadko4u@gmail.com>
Signed-off-by: Vladimir Sadovnikov <sadko4u@gmail.com>
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/5837ce8a8c686560fc8f40b4204dd2a10721869b.1624379707.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some inputs on Gen 3 models have an "air" feature which can be enabled
from the driver or (model-dependent) from the front panel. Add support
for getting and setting the state of those switches.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/44d448a4150b9c068754759c9fdd2bfe21484487.1624379707.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add initial support for the Focusrite Scarlett Solo and 2i2 devices:
- They have no mixer
- They don't support reporting sync status or levels
- The configuration space is laid out differently to the other models
- There is no level (line/inst) switch on input 1 of the Solo
Co-developed-by: Vladimir Sadovnikov <sadko4u@gmail.com>
Signed-off-by: Vladimir Sadovnikov <sadko4u@gmail.com>
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/190b90f6f1f8f8d4dfb5f0a7761ff8ae5c40fdde.1624379707.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Move scarlett2_usb_get() and scarlett2_usb_get_config() above the
functions relating to updating the configuration so that
scarlett2_usb_set_config() can call scarlett2_usb_get() in a
subsequent patch.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/1549f8e44548be679119f0b1462f888f4a03812d.1624379707.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some models allow the level and pad settings to be controlled from the
front-panel of the device. For these, the device will send an
"input-other" notification to prompt the driver to re-read the status
of those settings.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/06289a7697455e96b7dbdfd2d384d4b20f8df6e0.1624379707.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current way of the scarlett2 mixer code managing the
usb_mixer_elem_info object is wrong in two ways: it passes its
internal index to the head.id field, and the val_type field is
uninitialized. This ended up with the wrong execution at the resume
because a bogus unit id is passed wrongly. Also, in the later code
extensions, we'll have more mixer elements, and passing the index will
overflow the unit id size (of 256).
This patch corrects those issues. It introduces a new value type,
USB_MIXER_BESPOKEN, which indicates a non-standard mixer element, and
use this type for all scarlett2 mixer elements, as well as
initializing the fixed unit id 0 for avoiding the overflow.
Tested-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/49721219f45b7e175e729b0d9d9c142fd8f4342a.1624379707.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The scarlett2_ports struct contains both generic (hardware IDs and
descriptions) and model-specific (port count) data. Remove the generic
data from the scarlett2_device_info struct so it is not repeated for
every model.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/7a9e57e4e55a482390c692a9e60731d72b664a15.1624294591.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some Gen 3 devices do not put all of the mux entries for the same port
types together in order in the "set mux" message data. To prepare for
this, replace the struct scarlett2_ports num[] array and the
assignment_order[] array with mux_assignment[], a list of port types
and ranges that is defined in the struct scarlett2_device_info.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/08e8d784d78262cb57496d28ef1ad7b6213a90ab.1624294591.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For each analogue output, in addition to the output volume (gain)
control, the hardware also has a mute control. Add ALSA mute controls
for each analogue output.
If the device has the line_out_hw_vol feature, then the mute control
is disabled along with the output volume control when the switch is
set to HW.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/6fad82174b44633e46cfd96332a038de74d544f2.1624294591.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add the USB device ID to the scarlett2_device_info struct so that the
switch statement which finds the appropriate struct can be replaced
with a loop that looks through an array of pointers to those structs.
Suggested-by: Vladimir Sadovnikov <sadko4u@gmail.com>
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/474c408c29fb280a611e47e49e59ca2fb9810d27.1624294591.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Remove the hard-coded interface number and related constants for the
vendor-specific interface and look them up from the USB endpoint
descriptor.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/20210620164652.GA9237@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
scarlett2_usb_set_config() and scarlett2_usb_get_config() were copying
struct scarlett2_config. Use a pointer instead.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/20210620164648.GA9231@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix mixer control callbacks to use the correct members of the struct
snd_ctl_elem_value. The use of value.integer and value.enumerated were
swapped in a few places.
Update scarlett2_mux_src_enum_ctl_put() to use min() instead of
clamp() as value.enumerated.item is unsigned.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/20210620164647.GA9226@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Mixer control put callbacks should return 1 if the value is changed.
Fix the sw_hw, level, pad, and button controls accordingly.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/20210620164645.GA9221@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The private->vol_updated flag was being checked outside of the
mutex_lock/unlock() of private->data_mutex leading to the volume data
being fetched twice from the device unnecessarily or old volume data
being returned.
Update scarlett2_*_ctl_get() and include the private->vol_updated flag
check inside the critical region.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/20210620164643.GA9216@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add index temporary variable to scarlett2_mixer_ctl_put() for
consistency with the other *_ctl_put() functions.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/20210620164641.GA9211@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Rename struct scarlett2_mixer_data to struct scarlett2_data. A
less-wordy name is better because it is used everywhere, and although
this is a mixer driver, it also controls other vendor-specific
features.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/20210620164639.GA9206@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
