2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-24 21:24:00 +08:00
Commit Graph

210260 Commits

Author SHA1 Message Date
Jesse Barnes
4f0d1aff79 drm/i915: fix pipeconf dither bit definitions
Make them match the others and add BPP definitions.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-08 12:38:17 +01:00
Chris Wilson
dd2575ffbd drm/i915: Remove impossible error handling from bit17 swizzling
Our usage of kmap() cannot return NULL here, so remove the unnecessary
error handling.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-08 11:30:00 +01:00
Chris Wilson
8c80b59b37 drm/i915: Add ringbuffer wait reset to hangcheck
The GPU records whether it is currently waiting for a completion of a
WAIT_FOR_EVENT in the RB_WAIT bit in the ringbuffer control registers.
On third generation chipsets and later, a write of 1 to this bit breaks
the hang and returns the GPU to arbitration, i.e. the GPU should
continue executing the reminder of the batchbuffer and return to normal
operations.

By adding this to hangcheck we can avoid a full GPU reset under these
conditions.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-08 11:29:59 +01:00
Chris Wilson
4b60e5cb70 drm/i915: Clear scanline waits after disabling the pipe.
If we disable the pipe and the GPU is currently waiting on a scanline
WAIT_FOR_EVENT, the GPU will hang. Fortunately, there is a magic bit
which we can write on i915+ to break this wait after disabling the
pipe.

References:

  Bug 29252 - [Arrandale] Hung WAIT_FOR_EVENT when running rss-glx-skyrocket
  https://bugs.freedesktop.org/show_bug.cgi?id=29252

  Bug 28964 - [i965gm] GPU infinite MI_WAIT_FOR_EVENT while watching video in Totem
  https://bugs.freedesktop.org/show_bug.cgi?id=28964

and many others.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-09-08 11:29:58 +01:00
Chris Wilson
37811fcc91 drm/i915: Show framebuffer info in debugfs
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-08 11:29:58 +01:00
Chris Wilson
70d39fe486 drm/i915: Show device capabilities in debugfs
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-08 10:24:00 +01:00
Chris Wilson
b7ac36dada drm/i915/tv: After disabling the pipe, use wait_for_vblank_off()
Hopefully this is a contributing factor to the spurious TV detection
repoted by Ivan Bulatovic and others.

References:

  Bug 16871 - "TV1 connected" with no tv
  https://bugzilla.kernel.org/show_bug.cgi?id=16871

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Ivan Bulatovic <combuster@gmx.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-09-08 10:23:59 +01:00
Chris Wilson
a957355693 drm/i915: Refactor panel backlight controls
There were two instances of code to control the panel backlight and
neither handled the complete set of device variations.

Fixes:

  Bug 29716 - [GM965] Regression: Backlight resets to minimum when changing resolution
  https://bugs.freedesktop.org/show_bug.cgi?id=29716

And a bug on one of my PineView boxes which overflowed the backlight
value.

Incorporates part of a similar patch by Matthew Garrett that exposes a
native Intel backlight controller.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-08 10:23:58 +01:00
Chris Wilson
5d607f9b03 drm/i915: Remove redundant initialisation of fb_base
We do it whilst configuring dev->mode_config, so remove the out-of-place
earlier initialisation.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-08 10:23:57 +01:00
Chris Wilson
995b6762f0 drm/i915: Quieten sparse warnings for missing prototypes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-08 10:23:57 +01:00
Chris Wilson
de227ef090 drm/i915: Kill the active list spinlock
This spinlock only served debugging purposes in a time when we could not
be sure of the mutex ever being released upon a GPU hang. As we now
should be able rely on hangcheck to do the job for us (and that error
reporting should not itself require the struct mutex) we can kill the
incomplete attempt at protection.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-08 10:23:56 +01:00
Chris Wilson
015b9c8ce5 drm/i915: Remove the random SyncFlush during initialisation
We have no idea why we request a SyncFlush via INSTPM at that point in
time -- we certainly never check for its completion...

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-08 10:23:55 +01:00
Chris Wilson
3bd3c93299 drm/i915: Compile out error state without DEBUG_FS
Alexander reported that the compilation of intel_overlay.c was failing
due to an inclusion that was only valid with CONFIG_DEBUG_FS. As the
whole error reporting is only useful with debugfs enabled, remove all
the redundant error state collection code when compiling without
CONFIG_DEBUG_FS.

Reported-by: Alexander Lam <lambchop468@gmail.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-08 10:23:55 +01:00
Chris Wilson
b303cf9542 drm/i915/overlay: Use a continuation hook to finish work after a flip.
Slightly easier to follow than the state machine and now possible as the
control structure is opaque and hw_wedged is no longer interferred with.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2010-09-08 10:23:54 +01:00
Chris Wilson
23f09ce31c drm/i915/overlay: Make the overlay control struct opaque.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2010-09-08 10:23:53 +01:00
Chris Wilson
5dcdbcb06b drm/i915/overlay: Pass interruptible to switch_off()
During DPMS we currently do not want the overlay code to be
interruptible, so pass that information down and only take the
uninterrruptible paths.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2010-09-08 10:23:52 +01:00
Chris Wilson
106dadacbe drm/i915/overlay: Workaround i830 overlay activation bug.
On i830, there exists a bug where an overlay on pipe B requires the mode
clock on pipe A in order to activate. So workaround this by activating
pipe A when trying to enable the overlay on pipe B.

References:

  [Bug 29007] GPU hang on video playback with overlay
  https://bugs.freedesktop.org/show_bug.cgi?id=29007

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-08 10:23:52 +01:00
Chris Wilson
5fe82c5ee1 drm/i915/overlay: Make do_put_image() as static
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2010-09-08 10:23:51 +01:00
Chris Wilson
8dc5d14741 drm/i915: Preallocate requests
By allocating the request prior to writing to the ringbuffer, we can
abort the operation without leaving the GPU in an inconsistent state.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2010-09-08 10:23:50 +01:00
Chris Wilson
5cd68c9864 drm/i915/overlay: Tidy release_old_vid()
Inline the call to wait_flip() and simplify the resulting code.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2010-09-08 10:23:50 +01:00
Chris Wilson
8dfbc34031 drm/i915/overlay: Combine SWITCH_OFF into a single step
We can program the h/w to first wait on the flip and then switch off
without relying on s/w intervention. This removes the need for a double
step switch off, bringing much rejoicing.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2010-09-08 10:23:49 +01:00
Chris Wilson
9bb2ff731b drm/i915/overlay: Explicitly pass regs from map to unmap
The scoping of the validity of the mapping is thus clarified.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2010-09-08 10:23:48 +01:00
Chris Wilson
b6c028e004 drm/i915/overlay: Refactor do_wait_request()
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2010-09-08 10:23:47 +01:00
Chris Wilson
9f7c3f442b drm/i915/overlay: Tidy check_overlay_dst()
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2010-09-08 10:23:47 +01:00
Chris Wilson
446d2183af drm/i915/overlay: Tidy update_pfit_vscale_ratio()
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2010-09-08 10:23:46 +01:00
Chris Wilson
7340ea7dcf drm/i915/overlay: Remove duplicated definition of OFC_UPDATE
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2010-09-08 10:23:45 +01:00
Chris Wilson
62cf4e6fef drm/i915/overlay: Destroy reg_bo on shutdown.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2010-09-08 10:23:45 +01:00
Chris Wilson
a29301288f drm/i915/overlay: Use the recommended page alignment for physical regs
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2010-09-08 10:23:44 +01:00
Chris Wilson
60fc332cb5 drm/i915/overlay: Tidy attribute checking.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2010-09-08 10:23:43 +01:00
Chris Wilson
8d74f656dd drm/i915/overlay: Use non-atomic mappings for the common case.
The only time where an atomic mapping is required is during
error-capture and there we cannot use the default slot, but need to
specifically use one of the IRQ slots. So separate out the two
conditions and use the atomic mapping only when appropriate.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2010-09-08 10:23:42 +01:00
Chris Wilson
31578148b2 drm/i915/overlay: Move capabilities bits to common info block.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2010-09-08 10:23:42 +01:00
Chris Wilson
0ddc1289f3 drm/i915/overlay: Ensure that the reg_bo is in the GTT prior to writing.
Just makes sure that writes are not being aliased by the CPU cache and
do make it out to main memory.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=24977
Cc: stable@kernel.org
2010-09-08 10:23:41 +01:00
Chris Wilson
6ba3ddd983 drm/i915/overlay: Missing breaks between case statements for color depth
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2010-09-08 10:23:40 +01:00
Chris Wilson
722506f04d drm/i915/overlay: Whitespace
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2010-09-08 10:23:40 +01:00
Daniel Vetter
4fc6ee7646 drm/i915: drop i915_add_request right in front of i915_wait_request
... take advantage of the new implicit request issuing of
i915_wait_request.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-08 10:23:39 +01:00
Daniel Vetter
ba3d8d749b drm/i915: move the wait_rendering call into flush_gpu_write_domain
One caller (for the pageflip support) wants a purely pipelined flush.
Distinguish this case by a new parameter. This will also be useful
later on for pipelined fencing.

v2: Simplify the code by depending upon the implicit request emitting
of i915_wait_request.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[ickle: And drop the non-interruptible support in the process.]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-08 10:23:38 +01:00
Daniel Vetter
617dbe2787 drm/i915: drop seqno argument from i915_gem_object_move_to_active
By moving one i915_add_request we can solely depend on the new
auto-seqno-numbering behaviour.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-08 10:23:37 +01:00
Daniel Vetter
86394c669a drm/i915: kill a no longer necessary BUG_ON
i915_gem_object_move_to_active can handle zero seqno for us now.
And not emitting a request is not fatal here - we'll try to emit
a new one if we have to wait for some rendering to complete.

In case this assumption ever gets accidentally broken, there's already
a BUG_ON to catch it in i915_do_wait_request.

So just silently ignore ENOMEM here instead of screwing up the whole
drm.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-08 10:23:37 +01:00
Daniel Vetter
8a1a49f954 drm/i915: move flushing list processing to i915_retire_commands
... instead of threading flush_domains through the execbuf code to
i915_add_request.

With this change 2 small cleanups are possible (likewise the majority
of the patch):

- The flush_domains parameter of i915_add_request is always 0. Drop it
  and the corresponding logic.
- Ditto for the seqno param of i915_gem_process_flushing_list.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-08 10:23:36 +01:00
Daniel Vetter
a6910434e1 drm/i915: only one interrupt per batchbuffer is not enough!
Previously I thought that one interrupt per batchbuffer should be
enough. Now tedious benchmarking showed this to be wrong.

Therefore track whether any commands have been isssued with a future
seqno (like pipelined fencing changes or flushes). If this is the case
emit a request before issueing the batchbuffer.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-08 10:23:35 +01:00
Daniel Vetter
8bff917c93 drm/i915: move flushing list processing to i915_gem_flush
Now that we can move objects to the active list without already having
emitted a request, move the flushing list handling into i915_gem_flush.
This makes more sense and allows to drop a few i915_add_request calls
that are not strictly necessary.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-08 10:23:35 +01:00
Daniel Vetter
e35a41de39 drm/i915: allow lazy emitting of requests
Sometimes (like when flushing in preparation of batchbuffer execution)
we know that we'll emit a request but haven't yet done so. Allow this
case by simply taking the next seqno by default. Ensure that a request
is eventually emitted before waiting for an request by issuing it
in i915_wait_request iff this is not yet done.

Also replace one open-coded version of i915_gem_object_wait_rendering,
to prevent future code-diversion.

Chris Wilson asked me to explain and clarify what this patch does and why.
Here it goes:

Old way of moving objects onto the active list and associating them with a
reques:

1. i915_add_request + store the returned seqno somewhere
2. i915_gem_object_move_to_active (with the stored seqno as parameter)

For the current users, this is all fine. But I'd like to associate objects
(and fence regs) with the batchbuffer request deep down in the execbuf
call-chain. I thought about three ways of implementing this.

a) Don't care, just emit request when we need a new seqno. When heavily
pipelining fence reg changes, this would have caused tons of superflous
request (and corresponding irqs).

b) Thread all changed fences, objects, whatever through the execbuf-maze,
so that when we emit a request, we can store the new seqno at all the right
places.

c) Kill that seqno-threading-around business by simply storing the next
seqno, i.e. allow 2. to be done before 1. in the above sequence.

I've decided to implement c) (in this patch). The following patches are
just fall-out that resulted from this small conceptual change.

* We can handle the flushing list processing where we actually emit a flush
  (i915_gem_flush and i915_retire_commands) instead of in i915_add_request.
  The code makes IMHO more sense this way (and i915_add_request looses the
  flush_domains parameter, obviously).

* We can avoid emitting unnecessary requests. IMHO there's no point in
  emitting more than one request per batchbuffer (with or without an
  corresponding irq).

* By enforcing 2. before 1. ordering in the above sequence the seqno
  argument of i915_gem_object_move_to_active is redundant and can be
  dropped.

v2: Now i915_wait_request issues request if it is not yet emitted.
Also introduce i915_gem_next_request_seqno(dev) just in case we ever
need to do some prep work before using a new seqno.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[ickle: Keep i915_gem_object_set_to_display_plane() uninterruptible.]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-08 10:23:34 +01:00
Jesse Barnes
be282fd48e drm/i915: add MMIO debug output
Useful for capturing register read/write traces to send to the hw guys.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-08 10:23:33 +01:00
Chris Wilson
6c9547ff35 drm/i915/sdvo: Preserve pixel-multiplier
Store the pixel-multiplier on the adjusted mode and avoid modifying the
requested mode.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-08 10:23:27 +01:00
Chris Wilson
57cd6508da drm/i915: Sanity check user framebuffer parameters on creation
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-08 10:13:37 +01:00
Chris Wilson
763a4a0191 drm/i915/tv: Mark the format names as constant and so avoid the memleak
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-08 10:13:37 +01:00
Chris Wilson
974b93315b drm/i915/tv: Poll for DAC state change
Instead of sleeping for an arbitrary length of time (the documentation
fails to specify how long to wait for) wait until the load detection has
changed state (or at most the 20ms as before).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-08 10:13:36 +01:00
Chris Wilson
b8ed2a4f12 drm/i915/tv: Preserve reserved DAC bits during mode-setting
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-08 10:13:35 +01:00
Sitsofe Wheeler
efe8c25680 drm/i915: Revert extra intel_wait_for_vblank to prevent stalls.
With the extra intel_wait_for_vblank added in commit
9d0498a2bf periodic stalls were being
triggered (which were detected by i915_hangcheck_elapsed). Partially
revert this change for now.

Signed-off-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-08 10:13:34 +01:00
Chris Wilson
2bbda38963 drm/i915: Ironlake page-flipping is per-plane not per-pipe
Fix a minor confusion between intel_page_flip_finish(pipe) and
intel_page_flip_finish_plane(plane) -- should have no effect as
currently we map pipe 0 to plane 0 (and pipe 1 to plane 1).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-08 10:13:34 +01:00