swap_extent is used to map swap page offset to backing device's block
offset. For a continuous block range, one swap_extent is used and all
these swap_extents are managed in a linked list.
These swap_extents are used by map_swap_entry() during swap's read and
write path. To find out the backing device's block offset for a page
offset, the swap_extent list will be traversed linearly, with
curr_swap_extent being used as a cache to speed up the search.
This works well as long as swap_extents are not huge or when the number
of processes that access swap device are few, but when the swap device
has many extents and there are a number of processes accessing the swap
device concurrently, it can be a problem. On one of our servers, the
disk's remaining size is tight:
$df -h
Filesystem Size Used Avail Use% Mounted on
... ...
/dev/nvme0n1p1 1.8T 1.3T 504G 72% /home/t4
When creating a 80G swapfile there, there are as many as 84656 swap
extents. The end result is, kernel spends abou 30% time in
map_swap_entry() and swap throughput is only 70MB/s.
As a comparison, when I used smaller sized swapfile, like 4G whose
swap_extent dropped to 2000, swap throughput is back to 400-500MB/s and
map_swap_entry() is about 3%.
One downside of using rbtree for swap_extent is, 'struct rbtree' takes
24 bytes while 'struct list_head' takes 16 bytes, that's 8 bytes more
for each swap_extent. For a swapfile that has 80k swap_extents, that
means 625KiB more memory consumed.
Test:
Since it's not possible to reboot that server, I can not test this patch
diretly there. Instead, I tested it on another server with NVMe disk.
I created a 20G swapfile on an NVMe backed XFS fs. By default, the
filesystem is quite clean and the created swapfile has only 2 extents.
Testing vanilla and this patch shows no obvious performance difference
when swapfile is not fragmented.
To see the patch's effects, I used some tweaks to manually fragment the
swapfile by breaking the extent at 1M boundary. This made the swapfile
have 20K extents.
nr_task=4
kernel swapout(KB/s) map_swap_entry(perf) swapin(KB/s) map_swap_entry(perf)
vanilla 165191 90.77% 171798 90.21%
patched 858993 +420% 2.16% 715827 +317% 0.77%
nr_task=8
kernel swapout(KB/s) map_swap_entry(perf) swapin(KB/s) map_swap_entry(perf)
vanilla 306783 92.19% 318145 87.76%
patched 954437 +211% 2.35% 1073741 +237% 1.57%
swapout: the throughput of swap out, in KB/s, higher is better 1st
map_swap_entry: cpu cycles percent sampled by perf swapin: the
throughput of swap in, in KB/s, higher is better. 2nd map_swap_entry:
cpu cycles percent sampled by perf
nr_task=1 doesn't show any difference, this is due to the curr_swap_extent
can be effectively used to cache the correct swap extent for single task
workload.
[akpm@linux-foundation.org: s/BUG_ON(1)/BUG()/]
Link: http://lkml.kernel.org/r/20190523142404.GA181@aaronlu
Signed-off-by: Aaron Lu <ziqian.lzq@antfin.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
total_swapcache_pages() may race with swapper_spaces[] allocation and
freeing. Previously, this is protected with a swapper_spaces[] specific
RCU mechanism. To simplify the logic/code complexity, it is replaced with
get/put_swap_device(). The code line number is reduced too. Although not
so important, the swapoff() performance improves too because one
synchronize_rcu() call during swapoff() is deleted.
[ying.huang@intel.com: fix bad swap file entry warning]
Link: http://lkml.kernel.org/r/20190531024102.21723-1-ying.huang@intel.com
Link: http://lkml.kernel.org/r/20190527082714.12151-1-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Andrea Parri <andrea.parri@amarulasolutions.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When swapin is performed, after getting the swap entry information from
the page table, system will swap in the swap entry, without any lock held
to prevent the swap device from being swapoff. This may cause the race
like below,
CPU 1 CPU 2
----- -----
do_swap_page
swapin_readahead
__read_swap_cache_async
swapoff swapcache_prepare
p->swap_map = NULL __swap_duplicate
p->swap_map[?] /* !!! NULL pointer access */
Because swapoff is usually done when system shutdown only, the race may
not hit many people in practice. But it is still a race need to be fixed.
To fix the race, get_swap_device() is added to check whether the specified
swap entry is valid in its swap device. If so, it will keep the swap
entry valid via preventing the swap device from being swapoff, until
put_swap_device() is called.
Because swapoff() is very rare code path, to make the normal path runs as
fast as possible, rcu_read_lock/unlock() and synchronize_rcu() instead of
reference count is used to implement get/put_swap_device(). >From
get_swap_device() to put_swap_device(), RCU reader side is locked, so
synchronize_rcu() in swapoff() will wait until put_swap_device() is
called.
In addition to swap_map, cluster_info, etc. data structure in the struct
swap_info_struct, the swap cache radix tree will be freed after swapoff,
so this patch fixes the race between swap cache looking up and swapoff
too.
Races between some other swap cache usages and swapoff are fixed too via
calling synchronize_rcu() between clearing PageSwapCache() and freeing
swap cache data structure.
Another possible method to fix this is to use preempt_off() +
stop_machine() to prevent the swap device from being swapoff when its data
structure is being accessed. The overhead in hot-path of both methods is
similar. The advantages of RCU based method are,
1. stop_machine() may disturb the normal execution code path on other
CPUs.
2. File cache uses RCU to protect its radix tree. If the similar
mechanism is used for swap cache too, it is easier to share code
between them.
3. RCU is used to protect swap cache in total_swapcache_pages() and
exit_swap_address_space() already. The two mechanisms can be
merged to simplify the logic.
Link: http://lkml.kernel.org/r/20190522015423.14418-1-ying.huang@intel.com
Fixes: 235b621767 ("mm/swap: add cluster lock")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Not-nacked-by: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 6b4c9f4469 ("filemap: drop the mmap_sem for all blocking
operations") changed when mmap_sem is dropped during filemap page fault
and when returning VM_FAULT_RETRY.
Correct the comment to reflect the change.
Link: http://lkml.kernel.org/r/1556234531-108228-1-git-send-email-yang.shi@linux.alibaba.com
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix the callback 9p passes to read_cache_page to actually have the
proper type expected. Casting around function pointers can easily
hide typing bugs, and defeats control flow protection.
Link: http://lkml.kernel.org/r/20190520055731.24538-5-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix the callback jffs2 passes to read_cache_page to actually have the
proper type expected. Casting around function pointers can easily hide
typing bugs, and defeats control flow protection.
Link: http://lkml.kernel.org/r/20190520055731.24538-4-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We can just pass a NULL filler and do the right thing inside of
do_read_cache_page based on the NULL parameter.
Link: http://lkml.kernel.org/r/20190520055731.24538-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "fix filler_t callback type mismatches", v2.
Casting mapping->a_ops->readpage to filler_t causes an indirect call
type mismatch with Control-Flow Integrity checking. This change fixes
the mismatch in read_cache_page_gfp and read_mapping_page by adding
using a NULL filler argument as an indication to call ->readpage
directly, and by passing the right parameter callbacks in nfs and jffs2.
This patch (of 4):
Code cleanup.
Link: http://lkml.kernel.org/r/20190520055731.24538-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When debug_pagealloc is enabled, we currently allocate the page_ext
array to mark guard pages with the PAGE_EXT_DEBUG_GUARD flag. Now that
we have the page_type field in struct page, we can use that instead, as
guard pages are neither PageSlab nor mapped to userspace. This reduces
memory overhead when debug_pagealloc is enabled and there are no other
features requiring the page_ext array.
Link: http://lkml.kernel.org/r/20190603143451.27353-4-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The page allocator checks struct pages for expected state (mapcount,
flags etc) as pages are being allocated (check_new_page()) and freed
(free_pages_check()) to provide some defense against errors in page
allocator users.
Prior commits 479f854a20 ("mm, page_alloc: defer debugging checks of
pages allocated from the PCP") and 4db7548ccb ("mm, page_alloc: defer
debugging checks of freed pages until a PCP drain") this has happened
for order-0 pages as they were allocated from or freed to the per-cpu
caches (pcplists). Since those are fast paths, the checks are now
performed only when pages are moved between pcplists and global free
lists. This however lowers the chances of catching errors soon enough.
In order to increase the chances of the checks to catch errors, the
kernel has to be rebuilt with CONFIG_DEBUG_VM, which also enables
multiple other internal debug checks (VM_BUG_ON() etc), which is
suboptimal when the goal is to catch errors in mm users, not in mm code
itself.
To catch some wrong users of the page allocator we have
CONFIG_DEBUG_PAGEALLOC, which is designed to have virtually no overhead
unless enabled at boot time. Memory corruptions when writing to freed
pages have often the same underlying errors (use-after-free, double free)
as corrupting the corresponding struct pages, so this existing debugging
functionality is a good fit to extend by also perform struct page checks
at least as often as if CONFIG_DEBUG_VM was enabled.
Specifically, after this patch, when debug_pagealloc is enabled on boot,
and CONFIG_DEBUG_VM disabled, pages are checked when allocated from or
freed to the pcplists *in addition* to being moved between pcplists and
free lists. When both debug_pagealloc and CONFIG_DEBUG_VM are enabled,
pages are checked when being moved between pcplists and free lists *in
addition* to when allocated from or freed to the pcplists.
When debug_pagealloc is not enabled on boot, the overhead in fast paths
should be virtually none thanks to the use of static key.
Link: http://lkml.kernel.org/r/20190603143451.27353-3-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "debug_pagealloc improvements".
I have been recently debugging some pcplist corruptions, where it would be
useful to perform struct page checks immediately as pages are allocated
from and freed to pcplists, which is now only possible by rebuilding the
kernel with CONFIG_DEBUG_VM (details in Patch 2 changelog).
To make this kind of debugging simpler in future on a distro kernel, I
have improved CONFIG_DEBUG_PAGEALLOC so that it has even smaller overhead
when not enabled at boot time (Patch 1) and also when enabled (Patch 3),
and extended it to perform the struct page checks more often when enabled
(Patch 2). Now it can be configured in when building a distro kernel
without extra overhead, and debugging page use after free or double free
can be enabled simply by rebooting with debug_pagealloc=on.
This patch (of 3):
CONFIG_DEBUG_PAGEALLOC has been redesigned by 031bc5743f
("mm/debug-pagealloc: make debug-pagealloc boottime configurable") to
allow being always enabled in a distro kernel, but only perform its
expensive functionality when booted with debug_pagelloc=on. We can
further reduce the overhead when not boot-enabled (including page
allocator fast paths) using static keys. This patch introduces one for
debug_pagealloc core functionality, and another for the optional guard
page functionality (enabled by booting with debug_guardpage_minorder=X).
Link: http://lkml.kernel.org/r/20190603143451.27353-2-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When failslab was originally written, the intention of the
"ignore-gfp-wait" flag default value ("N") was to fail GFP_ATOMIC
allocations. Those were defined as (__GFP_HIGH), and the code would test
for __GFP_WAIT (0x10u).
However, since then, __GFP_WAIT was replaced by __GFP_RECLAIM
(___GFP_DIRECT_RECLAIM|___GFP_KSWAPD_RECLAIM), and GFP_ATOMIC is now
defined as (__GFP_HIGH|__GFP_ATOMIC|__GFP_KSWAPD_RECLAIM).
This means that when the flag is false, almost no allocation ever fails
(as even GFP_ATOMIC allocations contain ___GFP_KSWAPD_RECLAIM).
Restore the original intent of the code, by ignoring calls that directly
reclaim only (__GFP_DIRECT_RECLAIM), and thus, failing GFP_ATOMIC calls
again by default.
Link: http://lkml.kernel.org/r/20190520214514.81360-1-drinkcat@chromium.org
Fixes: 71baba4b92 ("mm, page_alloc: rename __GFP_WAIT to __GFP_RECLAIM")
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Previously totalram_pages was the global variable. Currently,
totalram_pages is the static inline function from the include/linux/mm.h
However, the function is also marked as EXPORT_SYMBOL, which is at best an
odd combination. Because there is no point for the static inline function
from a public header to be exported, this commit removes the
EXPORT_SYMBOL() marking. It will be still possible to use the function in
modules because all the symbols it depends on are exported.
Link: http://lkml.kernel.org/r/20190710141031.15642-1-efremov@linux.com
Fixes: ca79b0c211 ("mm: convert totalram_pages and totalhigh_pages variables to atomic")
Signed-off-by: Denis Efremov <efremov@linux.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For spinlocks the type spinlock_t should be used instead of "struct
spinlock".
Use spinlock_t for spinlock's definition.
Link: http://lkml.kernel.org/r/20190704153803.12739-3-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
undo_isolate_page_range() never fails, so no need to return value.
Link: http://lkml.kernel.org/r/1562075604-8979-1-git-send-email-kernelfans@gmail.com
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
account_page_dirtied() is only used by our set_page_dirty() helpers and
should not be used anywhere else.
Link: http://lkml.kernel.org/r/20190605183702.30572-1-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The field is only used in swap code.
Link: http://lkml.kernel.org/r/20190503190500.GA30589@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Instead of using defines, which loses type safety and provokes unused
variable warnings from gcc, put the constants into static inlines.
Link: http://lkml.kernel.org/r/20190522235102.GA15370@mellanox.com
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make the success case use the same cleanup path as the failure case.
Link: http://lkml.kernel.org/r/20190523134024.GC24093@localhost.localdomain
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
follow_page_mask() is only used in gup.c, make it static.
Link: http://lkml.kernel.org/r/20190510190831.GA4061@bharath12345-Inspiron-5559
Signed-off-by: Bharath Vedartham <linux.bhar@gmail.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The ARCH_SELECT_MEMORY_MODEL option is enabled only for 64-bit. However,
64-bit configuration also enables ARCH_SPARSEMEM_DEFAULT and there is no
ARCH_FLATMEM_ENABLE in arch/sparc/Kconfig.
With such settings, the dependencies in mm/Kconfig are always evaluated to
SPARSEMEM=y for 64-bit and to FLATMEM=y for 32-bit.
The ARCH_SELECT_MEMORY_MODEL option in arch/sparc/Kconfig does not affect
anything and can be removed.
Link: http://lkml.kernel.org/r/1556740577-4140-4-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The only reason s390 has ARCH_SELECT_MEMORY_MODEL option in
arch/s390/Kconfig is an ancient compile error with allnoconfig which was
fixed by commit 97195d6b41 ("[S390] fix sparsemem related compile error
with allnoconfig on s390") by adding the ARCH_SELECT_MEMORY_MODEL option.
Since then a lot have changed and now allnoconfig builds just fine without
ARCH_SELECT_MEMORY_MODEL, so it can be removed.
Link: http://lkml.kernel.org/r/1556740577-4140-3-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "remove ARCH_SELECT_MEMORY_MODEL where it has no effect".
For several architectures the ARCH_SELECT_MEMORY_MODEL has no real effect
because the dependencies for the memory model are always evaluated to a
single value.
Remove the ARCH_SELECT_MEMORY_MODEL from the Kconfigs for these
architectures.
This patch (of 3):
The ARCH_SELECT_MEMORY_MODEL in arch/arm/Kconfig is enabled only when
ARCH_SPARSEMEM_ENABLE=y. But in this case, ARCH_SPARSEMEM_DEFAULT is also
enabled and this in turn enables SPARSEMEM_MANUAL.
Since there is no definition of ARCH_FLATMEM_ENABLE in arch/arm/Kconfig,
SPARSEMEM_MANUAL is the only enabled memory model, hence the final
selection will evaluate to SPARSEMEM=y.
Since ARCH_SPARSEMEM_ENABLE is set to 'y' only by several sub-arch
configurations, the default for must sub-arches would be the falback to
FLATMEM regardless of ARCH_SELECT_MEMORY_MODEL.
Link: http://lkml.kernel.org/r/1556740577-4140-2-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It has no callers and there is no virt_to_pfn_t().
Reported-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ksize() has been unconditionally unpoisoning the whole shadow memory
region associated with an allocation. This can lead to various undetected
bugs, for example, double-kzfree().
Specifically, kzfree() uses ksize() to determine the actual allocation
size, and subsequently zeroes the memory. Since ksize() used to just
unpoison the whole shadow memory region, no invalid free was detected.
This patch addresses this as follows:
1. Add a check in ksize(), and only then unpoison the memory region.
2. Preserve kasan_unpoison_slab() semantics by explicitly unpoisoning
the shadow memory region using the size obtained from __ksize().
Tested:
1. With SLAB allocator: a) normal boot without warnings; b) verified the
added double-kzfree() is detected.
2. With SLUB allocator: a) normal boot without warnings; b) verified the
added double-kzfree() is detected.
[elver@google.com: s/BUG_ON/WARN_ON_ONCE/, per Kees]
Link: http://lkml.kernel.org/r/20190627094445.216365-6-elver@google.com
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199359
Link: http://lkml.kernel.org/r/20190626142014.141844-6-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This refactors common code of ksize() between the various allocators into
slab_common.c: __ksize() is the allocator-specific implementation without
instrumentation, whereas ksize() includes the required KASAN logic.
Link: http://lkml.kernel.org/r/20190626142014.141844-5-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Christoph Lameter <cl@linux.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a simple test that checks if double-kzfree is being detected
correctly.
Link: http://lkml.kernel.org/r/20190626142014.141844-4-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This changes {,__}kasan_check_{read,write} functions to return a boolean
denoting if the access was valid or not.
[sfr@canb.auug.org.au: include types.h for "bool"]
Link: http://lkml.kernel.org/r/20190705184949.13cdd021@canb.auug.org.au
Link: http://lkml.kernel.org/r/20190626142014.141844-3-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm/kasan: Add object validation in ksize()", v3.
This patch (of 5):
This introduces __kasan_check_{read,write}. __kasan_check functions may
be used from anywhere, even compilation units that disable instrumentation
selectively.
This change eliminates the need for the __KASAN_INTERNAL definition.
[elver@google.com: v5]
Link: http://lkml.kernel.org/r/20190708170706.174189-2-elver@google.com
Link: http://lkml.kernel.org/r/20190626142014.141844-2-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds a new header to asm-generic to allow optionally instrumenting
architecture-specific asm implementations of bitops.
This change includes the required change for x86 as reference and
changes the kernel API doc to point to bitops-instrumented.h instead.
Rationale: the functions in x86's bitops.h are no longer the kernel API
functions, but instead the arch_ prefixed functions, which are then
instrumented via bitops-instrumented.h.
Other architectures can similarly add support for asm implementations of
bitops.
The documentation text was derived from x86 and existing bitops
asm-generic versions: 1) references to x86 have been removed; 2) as a
result, some of the text had to be reworded for clarity and consistency.
Tested using lib/test_kasan with bitops tests (pre-requisite patch).
Bugzilla ref: https://bugzilla.kernel.org/show_bug.cgi?id=198439
Link: http://lkml.kernel.org/r/20190613125950.197667-4-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch is a pre-requisite for enabling KASAN bitops instrumentation;
using static_cpu_has instead of boot_cpu_has avoids instrumentation of
test_bit inside the uaccess region. With instrumentation, the KASAN
check would otherwise be flagged by objtool.
For consistency, kernel/signal.c was changed to mirror this change,
however, is never instrumented with KASAN (currently unsupported under
x86 32bit).
Link: http://lkml.kernel.org/r/20190613125950.197667-3-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Suggested-by: H. Peter Anvin <hpa@zytor.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "Bitops instrumentation for KASAN", v5.
This patch (of 3):
This adds bitops tests to the test_kasan module. In a follow-up patch,
support for bitops instrumentation will be added.
Link: http://lkml.kernel.org/r/20190613125950.197667-2-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds support for printing stack frame description on invalid stack
accesses. The frame description is embedded by the compiler, which is
parsed and then pretty-printed.
Currently, we can only print the stack frame info for accesses to the
task's own stack, but not accesses to other tasks' stacks.
Example of what it looks like:
page dumped because: kasan: bad access detected
addr ffff8880673ef98a is located in stack of task insmod/2008 at offset 106 in frame:
kasan_stack_oob+0x0/0xf5 [test_kasan]
this frame has 2 objects:
[32, 36) 'i'
[96, 106) 'stack_array'
Memory state around the buggy address:
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=198435
Link: http://lkml.kernel.org/r/20190522100048.146841-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Wikipedia now has a main article to "tracing garbage collector" topic.
Change the URL and use the reStructuredText syntax for hyperlinks and add
more details about the use of the tool. Add a section about how to use
the kmemleak-test module to test the memory leak scanning.
Link: http://lkml.kernel.org/r/20190612155231.19448-2-andrealmeid@collabora.com
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
According to POSIX, EBUSY means that the "device or resource is busy", and
this can lead to people thinking that the file
`/sys/kernel/debug/kmemleak/` is somehow locked or being used by other
process. Change this error code to a more appropriate one.
Link: http://lkml.kernel.org/r/20190612155231.19448-1-andrealmeid@collabora.com
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently for CONFIG_SLUB, if a memcg kmem cache creation is failed and
the corresponding root kmem cache has SLAB_PANIC flag, the kernel will
be crashed. This is unnecessary as the kernel can handle the creation
failures of memcg kmem caches. Additionally CONFIG_SLAB does not
implement this behavior. So, to keep the behavior consistent between
SLAB and SLUB, removing the panic for memcg kmem cache creation
failures. The root kmem cache creation failure for SLAB_PANIC correctly
panics for both SLAB and SLUB.
Link: http://lkml.kernel.org/r/20190619232514.58994-1-shakeelb@google.com
Reported-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If ',' is not found, kmem_cache_flags() calls strlen() to find the end of
line. We can do it in a single pass using strchrnul().
Link: http://lkml.kernel.org/r/20190501053111.7950-1-ynorov@marvell.com
Signed-off-by: Yury Norov <ynorov@marvell.com>
Acked-by: Aaron Tomlin <atomlin@redhat.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds tests for double free and cross-cache freeing, which should both
be caught by CONFIG_SLAB_FREELIST_HARDENED.
Link: http://lkml.kernel.org/r/20190530045017.15252-4-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Alexander Popov <alex.popov@linux.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This avoids any possible type confusion when looking up an object. For
example, if a non-slab were to be passed to kfree(), the invalid
slab_cache pointer (i.e. overlapped with some other value from the
struct page union) would be used for subsequent slab manipulations that
could lead to further memory corruption.
Since the page is already in cache, adding the PageSlab() check will
have nearly zero cost, so add a check and WARN() to virt_to_cache().
Additionally replaces an open-coded virt_to_cache(). To support the
failure mode this also updates all callers of virt_to_cache() and
cache_from_obj() to handle a NULL cache pointer return value (though
note that several already handle this case gracefully).
[dan.carpenter@oracle.com: restore IRQs in kfree()]
Link: http://lkml.kernel.org/r/20190613065637.GE16334@mwanda
Link: http://lkml.kernel.org/r/20190530045017.15252-3-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Alexander Popov <alex.popov@linux.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm/slab: Improved sanity checking".
This adds defenses against slab cache confusion (as seen in real-world
exploits[1]) and gracefully handles type confusions when trying to look
up slab caches from an arbitrary page. (Also is patch 3: new LKDTM
tests for these defenses as well as for the existing double-free
detection.
This patch (of 3):
When building under CONFIG_SLAB_FREELIST_HARDENING, it makes sense to
perform sanity-checking on the assumed slab cache during
kmem_cache_free() to make sure the kernel doesn't mix freelists across
slab caches and corrupt memory (as seen in the exploitation of flaws
like CVE-2018-9568[1]). Note that the prior code might WARN() but still
corrupt memory (i.e. return the assumed cache instead of the owned
cache).
There is no noticeable performance impact (changes are within noise).
Measuring parallel kernel builds, I saw the following with
CONFIG_SLAB_FREELIST_HARDENED, before and after this patch:
before:
Run times: 288.85 286.53 287.09 287.07 287.21
Min: 286.53 Max: 288.85 Mean: 287.35 Std Dev: 0.79
after:
Run times: 289.58 287.40 286.97 287.20 287.01
Min: 286.97 Max: 289.58 Mean: 287.63 Std Dev: 0.99
Delta: 0.1% which is well below the standard deviation
[1] https://github.com/ThomasKing2014/slides/raw/master/Building%20universal%20Android%20rooting%20with%20a%20type%20confusion%20vulnerability.pdf
Link: http://lkml.kernel.org/r/20190530045017.15252-2-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Alexander Popov <alex.popov@linux.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kmemdup is introduced to duplicate a region of memory in a neat way.
Rather than kmalloc/kzalloc + memcpy, which the programmer needs to
write the size twice (sometimes lead to mistakes), kmemdup improves
readability, leads to smaller code and also reduce the chances of
mistakes.
Suggestion to use kmemdup rather than using kmalloc/kzalloc + memcpy.
[akpm@linux-foundation.org: coding style fixes]
Link: http://lkml.kernel.org/r/20190703163147.881-1-huangfq.daxian@gmail.com
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
fix below issue reported by coccicheck
fs/ocfs2/dlmglue.c:4410:5-11: Unneeded variable: "status". Return "0" on line 4428
We can not change return type of ocfs2_downconvert_thread as its
registered as callback of kthread_create.
Link: http://lkml.kernel.org/r/20190702183237.GA13975@hari-Inspiron-1545
Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Also, because there is no need to save the file dentry, remove all of
the variables that were being saved, and just recursively delete the
whole directory when shutting down, saving a lot of logic and local
variables.
[gregkh@linuxfoundation.org: v2]
Link: http://lkml.kernel.org/r/20190613055455.GE19717@kroah.com
Link: http://lkml.kernel.org/r/20190612152912.GA19151@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Jia Guo <guojia12@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ocfs2 file system uses locking_state file under debugfs to dump each
ocfs2 file system's dlm lock resources, but the users ever encountered
some hang(deadlock) problems in ocfs2 file system. I'd like to add
first lock wait time in locking_state file, which can help the upper
scripts detect these deadlock problems via comparing the first lock wait
time with the current time.
Link: http://lkml.kernel.org/r/20190611015414.27754-3-ghe@suse.com
Signed-off-by: Gang He <ghe@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add locking filter debugfs file, which is used to filter lock resources
dump from locking_state debugfs file. We use d_filter_secs field to
filter lock resources dump, the default d_filter_secs(0) value filters
nothing, otherwise, only dump the last N seconds active lock resources.
This enhancement can avoid dumping lots of old records. The
d_filter_secs value can be changed via locking_filter file.
[akpm@linux-foundation.org: fix undefined reference to `__udivdi3']
Link: http://lkml.kernel.org/r/20190611015414.27754-2-ghe@suse.com
Signed-off-by: Gang He <ghe@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> [build-tested]
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ocfs2 file system uses locking_state file under debugfs to dump each
ocfs2 file system's dlm lock resources, but the dlm lock resources in
memory are becoming more and more after the files were touched by the
user. it will become a bit difficult to analyze these dlm lock resource
records in locking_state file by the upper scripts, though some files
are not active for now, which were accessed long time ago.
Then, I'd like to add last pr/ex unlock times in locking_state file for
each dlm lock resource record, the the upper scripts can use last unlock
time to filter inactive dlm lock resource record.
Link: http://lkml.kernel.org/r/20190611015414.27754-1-ghe@suse.com
Signed-off-by: Gang He <ghe@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct dlm_migratable_lockres
{
...
struct dlm_migratable_lock ml[0]; // 16 bytes each, begins at byte 112
};
Make use of the struct_size() helper instead of an open-coded version in
order to avoid any potential type mistakes.
So, replace the following form:
sizeof(struct dlm_migratable_lockres) + (mres->num_locks * sizeof(struct dlm_migratable_lock))
with:
struct_size(mres, ml, mres->num_locks)
Notice that, in this case, variable sz is not necessary, hence it is
removed.
This code was detected with the help of Coccinelle.
Link: http://lkml.kernel.org/r/20190605204926.GA24467@embeddedor
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are some spelling mistakes in ocfs, fix it.
Link: http://lkml.kernel.org/r/1558964623-106628-1-git-send-email-cg.chen@huawei.com
Signed-off-by: ChenGang <cg.chen@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
